Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/sc7180-acer-aspire1.dts

raw
1 // SPDX-License-Identifier: BSD-3-Clause
2
3 /dts-v1/;
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/sound/qcom,q6asm.h>
7 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
8
9 #include "sc7180.dtsi"
10
11 #include "pm6150.dtsi"
12 #include "pm6150l.dtsi"
13
14 /delete-node/ &tz_mem;
15 /delete-node/ &ipa_fw_mem;
16
17 / {
18 model = "Acer Aspire 1";
19 compatible = "acer,aspire1", "qcom,sc7180";
20 chassis-type = "laptop";
21
22 aliases {
23 bluetooth0 = &bluetooth;
24 hsuart0 = &uart3;
25 serial0 = &uart8;
26 wifi0 = &wifi;
27 };
28
29 chosen {
30 stdout-path = "serial0:115200n8";
31 };
32
33 reserved-memory {
34 gpu_mem: zap-shader@80840000 {
35 reg = <0x0 0x80840000 0 0x2000>;
36 no-map;
37 };
38
39 venus_mem: venus@85b00000 {
40 reg = <0x0 0x85b00000 0 0x500000>;
41 no-map;
42 };
43
44 mpss_mem: mpss@86000000 {
45 reg = <0x0 0x86000000 0x0 0x2000000>;
46 no-map;
47 };
48
49 adsp_mem: adsp@8e400000 {
50 reg = <0x0 0x8e400000 0x0 0x2800000>;
51 no-map;
52 };
53
54 wlan_mem: wlan@93900000 {
55 reg = <0x0 0x93900000 0x0 0x200000>;
56 no-map;
57 };
58 };
59
60 max98357a: audio-codec {
61 compatible = "maxim,max98357a";
62 sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
63
64 pinctrl-0 = <&amp_sd_mode_default>;
65 pinctrl-names = "default";
66
67 #sound-dai-cells = <0>;
68 };
69
70 backlight: backlight {
71 compatible = "pwm-backlight";
72 pwms = <&sn65dsi86_bridge 1000000>;
73 enable-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
74
75 pinctrl-0 = <&soc_bkoff_default>;
76 pinctrl-names = "default";
77 };
78
79 reg_brij_1p2: bridge-1p2-regulator {
80 compatible = "regulator-fixed";
81 regulator-name = "brij_1p2";
82 regulator-min-microvolt = <1200000>;
83 regulator-max-microvolt = <1200000>;
84
85 gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>;
86 enable-active-high;
87
88 pinctrl-0 = <&reg_edp_1p2_en_default>;
89 pinctrl-names = "default";
90 };
91
92 reg_brij_1p8: bridge-regulator {
93 compatible = "regulator-fixed";
94 regulator-name = "brij_1p8";
95 regulator-min-microvolt = <1800000>;
96 regulator-max-microvolt = <1800000>;
97
98 vin-supply = <&vreg_l8c_1p8>;
99
100 gpio = <&tlmm 20 GPIO_ACTIVE_HIGH>;
101 enable-active-high;
102
103 pinctrl-0 = <&reg_edp_1p8_en_default>;
104 pinctrl-names = "default";
105 };
106
107 reg_codec_3p3: codec-regulator {
108 compatible = "regulator-fixed";
109 regulator-name = "codec_3p3";
110 regulator-min-microvolt = <3300000>;
111 regulator-max-microvolt = <3300000>;
112
113 gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>;
114 enable-active-high;
115
116 pinctrl-0 = <&reg_audio_en_default>;
117 pinctrl-names = "default";
118 };
119
120 reg_lcm_3p3: panel-regulator {
121 compatible = "regulator-fixed";
122 regulator-name = "lcm_3p3";
123 regulator-min-microvolt = <3300000>;
124 regulator-max-microvolt = <3300000>;
125
126 gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
127 enable-active-high;
128
129 pinctrl-0 = <&reg_lcm_en_default>;
130 pinctrl-names = "default";
131 };
132
133 sound: sound {
134 compatible = "qcom,sc7180-qdsp6-sndcard";
135 pinctrl-0 = <&pri_mi2s_active>, <&pri_mi2s_mclk_active>, <&ter_mi2s_active>;
136 pinctrl-names = "default";
137 model = "Acer-Aspire-1";
138
139 audio-routing =
140 "Headphone Jack", "HPOL",
141 "Headphone Jack", "HPOR";
142
143 multimedia1-dai-link {
144 link-name = "MultiMedia1";
145
146 cpu {
147 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
148 };
149 };
150
151 multimedia2-dai-link {
152 link-name = "MultiMedia2";
153
154 cpu {
155 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
156 };
157 };
158
159 multimedia3-dai-link {
160 link-name = "MultiMedia3";
161
162 cpu {
163 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
164 };
165 };
166
167 multimedia4-dai-link {
168 link-name = "MultiMedia4";
169
170 cpu {
171 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
172 };
173 };
174
175 primary-rx-dai-link {
176 link-name = "Primary MI2S Playback";
177
178 cpu {
179 sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
180 };
181
182 platform {
183 sound-dai = <&q6routing>;
184 };
185
186 codec {
187 sound-dai = <&alc5682 0>;
188 };
189 };
190
191 primary-tx-dai-link {
192 link-name = "Primary MI2S Capture";
193
194 cpu {
195 sound-dai = <&q6afedai PRIMARY_MI2S_TX>;
196 };
197
198 platform {
199 sound-dai = <&q6routing>;
200 };
201
202 codec {
203 sound-dai = <&alc5682 0>;
204 };
205 };
206
207 tertiary-rx-dai-link {
208 link-name = "Tertiary MI2S Playback";
209
210 cpu {
211 sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
212 };
213
214 platform {
215 sound-dai = <&q6routing>;
216 };
217
218 codec {
219 sound-dai = <&max98357a>;
220 };
221 };
222
223 displayport-rx-dai-link {
224 link-name = "DisplayPort Playback";
225
226 cpu {
227 sound-dai = <&q6afedai DISPLAY_PORT_RX>;
228 };
229
230 platform {
231 sound-dai = <&q6routing>;
232 };
233
234 codec {
235 sound-dai = <&mdss_dp>;
236 };
237 };
238 };
239
240 reg_tp_3p3: touchpad-regulator {
241 compatible = "regulator-fixed";
242 regulator-name = "tp_3p3";
243 regulator-min-microvolt = <3300000>;
244 regulator-max-microvolt = <3300000>;
245
246 gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
247 enable-active-high;
248
249 pinctrl-0 = <&reg_tp_en_default>;
250 pinctrl-names = "default";
251 };
252 };
253
254 &i2c2 {
255 clock-frequency = <400000>;
256 status = "okay";
257
258 embedded-controller@76 {
259 compatible = "acer,aspire1-ec";
260 reg = <0x76>;
261
262 interrupts-extended = <&tlmm 30 IRQ_TYPE_LEVEL_LOW>;
263
264 pinctrl-0 = <&ec_int_default>;
265 pinctrl-names = "default";
266
267 connector {
268 compatible = "usb-c-connector";
269
270 port {
271 ec_dp_in: endpoint {
272 remote-endpoint = <&mdss_dp_out>;
273 };
274 };
275 };
276 };
277 };
278
279 &i2c4 {
280 clock-frequency = <400000>;
281 status = "okay";
282
283 /*
284 * NOTE: DSDT defines two possible touchpads, other one is
285 *
286 * reg = <0x15>;
287 * hid-descr-addr = <0x1>;
288 */
289
290 touchpad@2c {
291 compatible = "hid-over-i2c";
292 reg = <0x2c>;
293 hid-descr-addr = <0x20>;
294
295 vdd-supply = <&reg_tp_3p3>;
296
297 interrupts-extended = <&tlmm 94 IRQ_TYPE_LEVEL_LOW>;
298
299 pinctrl-0 = <&hid_touchpad_default>;
300 pinctrl-names = "default";
301
302 wakeup-source;
303 };
304
305 keyboard@3a {
306 compatible = "hid-over-i2c";
307 reg = <0x3a>;
308 hid-descr-addr = <0x1>;
309
310 interrupts-extended = <&tlmm 33 IRQ_TYPE_LEVEL_LOW>;
311
312 pinctrl-0 = <&hid_keyboard_default>;
313 pinctrl-names = "default";
314
315 wakeup-source;
316 };
317 };
318
319 &i2c9 {
320 clock-frequency = <400000>;
321 status = "okay";
322
323 alc5682: codec@1a {
324 compatible = "realtek,rt5682i";
325 reg = <0x1a>;
326
327 #sound-dai-cells = <1>;
328
329 interrupt-parent = <&tlmm>;
330 interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
331
332 pinctrl-0 = <&codec_irq_default>;
333 pinctrl-names = "default";
334
335 AVDD-supply = <&vreg_l15a_1p8>;
336 MICVDD-supply = <&reg_codec_3p3>;
337 VBAT-supply = <&reg_codec_3p3>;
338 DBVDD-supply = <&vreg_l15a_1p8>;
339 LDO1-IN-supply = <&vreg_l15a_1p8>;
340
341 /*
342 * NOTE: The board has a path from this codec to the
343 * DMIC microphones in the lid, however some of the option
344 * resistors are absent and the microphones are connected
345 * to the SoC instead.
346 *
347 * If the resistors were to be changed by the user to
348 * connect the codec, the following could be used:
349 *
350 * realtek,dmic1-data-pin = <1>;
351 * realtek,dmic1-clk-pin = <1>;
352 */
353
354 realtek,jd-src = <1>;
355 };
356 };
357
358 &i2c10 {
359 clock-frequency = <400000>;
360 status = "okay";
361
362 sn65dsi86_bridge: bridge@2c {
363 compatible = "ti,sn65dsi86";
364 reg = <0x2c>;
365 gpio-controller;
366 #gpio-cells = <2>;
367 #pwm-cells = <1>;
368
369 interrupt-parent = <&tlmm>;
370 interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
371
372 enable-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
373 suspend-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
374
375 pinctrl-0 = <&bridge_en_default>,
376 <&edp_bridge_irq_default>,
377 <&bridge_suspend_default>;
378 pinctrl-names = "default";
379
380 vpll-supply = <&reg_brij_1p8>;
381 vccio-supply = <&reg_brij_1p8>;
382 vcca-supply = <&reg_brij_1p2>;
383 vcc-supply = <&reg_brij_1p2>;
384
385 clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
386 clock-names = "refclk";
387
388 ports {
389 #address-cells = <1>;
390 #size-cells = <0>;
391
392 port@0 {
393 reg = <0>;
394
395 sn65dsi86_in: endpoint {
396 remote-endpoint = <&mdss_dsi0_out>;
397 };
398 };
399
400 port@1 {
401 reg = <1>;
402
403 sn65dsi86_out: endpoint {
404 data-lanes = <0 1>;
405 remote-endpoint = <&panel_in_edp>;
406 };
407 };
408 };
409
410 aux-bus {
411 panel: panel {
412 compatible = "edp-panel";
413 power-supply = <&reg_lcm_3p3>;
414 backlight = <&backlight>;
415 hpd-absent-delay-ms = <200>;
416
417 port {
418 panel_in_edp: endpoint {
419 remote-endpoint = <&sn65dsi86_out>;
420 };
421 };
422 };
423 };
424 };
425 };
426
427 &gpu {
428 status = "okay";
429 };
430
431 &gpu_zap_shader {
432 firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn";
433 };
434
435 &mdss {
436 status = "okay";
437 };
438
439 &mdss_dp {
440 status = "okay";
441 };
442
443 &mdss_dp_out {
444 data-lanes = <0 1>;
445 remote-endpoint = <&ec_dp_in>;
446 };
447
448 &mdss_dsi0 {
449 vdda-supply = <&vreg_l3c_1p2>;
450 status = "okay";
451 };
452
453 &mdss_dsi0_out {
454 remote-endpoint = <&sn65dsi86_in>;
455 data-lanes = <0 1 2 3>;
456 };
457
458 &mdss_dsi0_phy {
459 vdds-supply = <&vreg_l4a_0p8>;
460 status = "okay";
461 };
462
463 &pm6150_adc {
464 channel@4e {
465 reg = <ADC5_AMUX_THM2_100K_PU>;
466 qcom,ratiometric;
467 qcom,hw-settle-time = <200>;
468 label = "thermistor";
469 };
470
471 channel@4f {
472 reg = <ADC5_AMUX_THM3_100K_PU>;
473 qcom,ratiometric;
474 qcom,hw-settle-time = <200>;
475 label = "charger_thermistor";
476 };
477 };
478
479 &pm6150_adc_tm {
480 status = "okay";
481
482 charger-thermistor@0 {
483 reg = <0>;
484 io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
485 qcom,ratiometric;
486 qcom,hw-settle-time-us = <200>;
487 };
488
489 thermistor@1 {
490 reg = <1>;
491 io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
492 qcom,ratiometric;
493 qcom,hw-settle-time-us = <200>;
494 };
495 };
496
497 &pm6150_pon {
498 status = "disabled";
499 };
500
501 &pm6150_rtc {
502 status = "okay";
503 };
504
505 &q6afedai {
506 dai@16 {
507 reg = <PRIMARY_MI2S_RX>;
508 qcom,sd-lines = <1>;
509 };
510
511 dai@17 {
512 reg = <PRIMARY_MI2S_TX>;
513 qcom,sd-lines = <0>;
514 };
515
516 dai@20 {
517 reg = <TERTIARY_MI2S_RX>;
518 qcom,sd-lines = <0>;
519 };
520
521 dai@104 {
522 reg = <DISPLAY_PORT_RX>;
523 };
524 };
525
526 &q6asmdai {
527 dai@0 {
528 reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
529 };
530
531 dai@1 {
532 reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
533 };
534
535 dai@2 {
536 reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
537 };
538
539 dai@3 {
540 reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
541 };
542 };
543
544 &qupv3_id_0 {
545 status = "okay";
546 };
547
548 &qupv3_id_1 {
549 status = "okay";
550 };
551
552 &remoteproc_adsp {
553 memory-region = <&adsp_mem>;
554 firmware-name = "qcom/sc7180/acer/aspire1/qcadsp7180.mbn";
555 status = "okay";
556 };
557
558 &remoteproc_mpss {
559 firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn";
560 status = "okay";
561 };
562
563 &sdhc_1 {
564 pinctrl-0 = <&sdc1_default>;
565 pinctrl-1 = <&sdc1_sleep>;
566 pinctrl-names = "default", "sleep";
567 vmmc-supply = <&vreg_l19a_2p9>;
568 vqmmc-supply = <&vreg_l12a_1p8>;
569
570 status = "okay";
571 };
572
573 &uart3 {
574 /delete-property/interrupts;
575 interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
576 <&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
577
578 pinctrl-1 = <&qup_uart3_sleep>;
579 pinctrl-names = "default", "sleep";
580
581 status = "okay";
582
583 bluetooth: bluetooth {
584 compatible = "qcom,wcn3991-bt";
585 vddio-supply = <&vreg_l10a_1p8>;
586 vddxo-supply = <&vreg_l1c_1p8>;
587 vddrf-supply = <&vreg_l2c_1p3>;
588 vddch0-supply = <&vreg_l10c_3p3>;
589 max-speed = <3200000>;
590 };
591 };
592
593 &uart8 {
594 status = "okay";
595 };
596
597 &usb_1 {
598 status = "okay";
599 };
600
601 &usb_1_dwc3 {
602 dr_mode = "host";
603 #address-cells = <1>;
604 #size-cells = <0>;
605
606 usb_hub_2_x: hub@1 {
607 compatible = "usbbda,5411";
608 reg = <1>;
609 peer-hub = <&usb_hub_3_x>;
610 };
611
612 usb_hub_3_x: hub@2 {
613 compatible = "usbbda,411";
614 reg = <2>;
615 peer-hub = <&usb_hub_2_x>;
616 };
617 };
618
619 &usb_1_hsphy {
620 vdd-supply = <&vreg_l4a_0p8>;
621 vdda-pll-supply = <&vreg_l11a_1p8>;
622 vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
623 qcom,imp-res-offset-value = <8>;
624 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
625 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
626 qcom,bias-ctrl-value = <0x22>;
627 qcom,charge-ctrl-value = <3>;
628 qcom,hsdisc-trim-value = <0>;
629
630 status = "okay";
631 };
632
633 &usb_1_qmpphy {
634 vdda-phy-supply = <&vreg_l3c_1p2>;
635 vdda-pll-supply = <&vreg_l4a_0p8>;
636
637 status = "okay";
638 };
639
640 &venus {
641 firmware-name = "qcom/sc7180/acer/aspire1/qcvss7180.mbn";
642 };
643
644 &wifi {
645 vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
646 vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
647 vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
648 vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
649 vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
650
651 status = "okay";
652 };
653
654 &apps_rsc {
655 regulators-0 {
656 compatible = "qcom,pm6150-rpmh-regulators";
657 qcom,pmic-id = "a";
658
659 vreg_s1a_1p1: smps1 {
660 regulator-min-microvolt = <1128000>;
661 regulator-max-microvolt = <1128000>;
662 };
663
664 vreg_l4a_0p8: ldo4 {
665 regulator-min-microvolt = <824000>;
666 regulator-max-microvolt = <928000>;
667 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
668 };
669
670 vreg_l9a_0p6: ldo9 {
671 regulator-min-microvolt = <488000>;
672 regulator-max-microvolt = <800000>;
673 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
674 };
675
676 vreg_l10a_1p8: ldo10 {
677 regulator-min-microvolt = <1800000>;
678 regulator-max-microvolt = <1800000>;
679 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
680 regulator-always-on;
681 regulator-boot-on;
682 };
683
684 vreg_l11a_1p8: ldo11 {
685 regulator-min-microvolt = <1800000>;
686 regulator-max-microvolt = <1800000>;
687 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
688 };
689
690 vreg_l12a_1p8: ldo12 {
691 regulator-min-microvolt = <1800000>;
692 regulator-max-microvolt = <1800000>;
693 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
694 };
695
696 vreg_l13a_1p8: ldo13 {
697 regulator-min-microvolt = <1800000>;
698 regulator-max-microvolt = <1800000>;
699 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
700 };
701
702 vreg_l14a_1p8: ldo14 {
703 regulator-min-microvolt = <1800000>;
704 regulator-max-microvolt = <1800000>;
705 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
706 };
707
708 vreg_l15a_1p8: ldo15 {
709 regulator-min-microvolt = <1800000>;
710 regulator-max-microvolt = <1800000>;
711 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
712 };
713
714 vreg_l16a_2p7: ldo16 {
715 regulator-min-microvolt = <2496000>;
716 regulator-max-microvolt = <3304000>;
717 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
718 };
719
720 vreg_l17a_3p0: ldo17 {
721 regulator-min-microvolt = <2920000>;
722 regulator-max-microvolt = <3232000>;
723 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
724 };
725
726 vreg_l18a_2p8: ldo18 {
727 regulator-min-microvolt = <2496000>;
728 regulator-max-microvolt = <3304000>;
729 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
730 };
731
732 vreg_l19a_2p9: ldo19 {
733 regulator-min-microvolt = <2960000>;
734 regulator-max-microvolt = <2960000>;
735 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
736 };
737 };
738
739 regulators-1 {
740 compatible = "qcom,pm6150l-rpmh-regulators";
741 qcom,pmic-id = "c";
742
743 vreg_s8c_1p3: smps8 {
744 regulator-min-microvolt = <1120000>;
745 regulator-max-microvolt = <1408000>;
746 };
747
748 vreg_l1c_1p8: ldo1 {
749 regulator-min-microvolt = <1616000>;
750 regulator-max-microvolt = <1984000>;
751 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
752 };
753
754 vreg_l2c_1p3: ldo2 {
755 regulator-min-microvolt = <1168000>;
756 regulator-max-microvolt = <1304000>;
757 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
758 };
759
760 vreg_l3c_1p2: ldo3 {
761 regulator-min-microvolt = <1144000>;
762 regulator-max-microvolt = <1304000>;
763 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
764 };
765
766 vreg_l4c_1p8: ldo4 {
767 regulator-min-microvolt = <1648000>;
768 regulator-max-microvolt = <3304000>;
769 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
770 };
771
772 vreg_l5c_1p8: ldo5 {
773 regulator-min-microvolt = <1648000>;
774 regulator-max-microvolt = <3304000>;
775 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
776 };
777
778 vreg_l6c_2p9: ldo6 {
779 regulator-min-microvolt = <1800000>;
780 regulator-max-microvolt = <2950000>;
781 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
782 };
783
784 vreg_l7c_3p0: ldo7 {
785 regulator-min-microvolt = <3000000>;
786 regulator-max-microvolt = <3312000>;
787 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
788 };
789
790 vreg_l8c_1p8: ldo8 {
791 regulator-min-microvolt = <1800000>;
792 regulator-max-microvolt = <1800000>;
793 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
794 };
795
796 vreg_l9c_2p9: ldo9 {
797 regulator-min-microvolt = <2952000>;
798 regulator-max-microvolt = <2952000>;
799 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
800 };
801
802 vreg_l10c_3p3: ldo10 {
803 regulator-min-microvolt = <3000000>;
804 regulator-max-microvolt = <3400000>;
805 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
806 };
807
808 vreg_l11c_3p3: ldo11 {
809 regulator-min-microvolt = <3000000>;
810 regulator-max-microvolt = <3400000>;
811 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
812 };
813
814 vreg_bob: bob {
815 regulator-min-microvolt = <3008000>;
816 regulator-max-microvolt = <3960000>;
817 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
818 };
819 };
820 };
821
822 &qup_i2c2_default {
823 drive-strength = <2>;
824
825 /* Has external pullup */
826 bias-disable;
827 };
828
829 &qup_i2c4_default {
830 drive-strength = <2>;
831
832 /* Has external pullup */
833 bias-disable;
834 };
835
836 &qup_i2c9_default {
837 drive-strength = <2>;
838
839 /* Has external pullup */
840 bias-disable;
841 };
842
843 &qup_i2c10_default {
844 drive-strength = <2>;
845
846 /* Has external pullup */
847 bias-disable;
848 };
849
850 &tlmm {
851 /*
852 * The TZ seem to protect those because some boards can have
853 * fingerprint sensor connected to this range. Not connected
854 * on this board
855 */
856 gpio-reserved-ranges = <58 5>;
857
858 amp_sd_mode_default: amp-sd-mode-deault-state {
859 pins = "gpio23";
860 function = "gpio";
861 drive-strength = <16>;
862 bias-disable;
863 };
864
865 bridge_en_default: bridge-en-default-state {
866 pins = "gpio51";
867 function = "gpio";
868 drive-strength = <16>;
869 bias-disable;
870 };
871
872 bridge_suspend_default: bridge-suspend-default-state {
873 pins = "gpio22";
874 function = "gpio";
875 drive-strength = <16>;
876 bias-pull-up;
877 };
878
879 codec_irq_default: codec-irq-deault-state {
880 pins = "gpio28";
881 function = "gpio";
882 drive-strength = <2>;
883 bias-disable;
884 };
885
886 ec_int_default: ec-int-default-state {
887 pins = "gpio30";
888 function = "gpio";
889 drive-strength = <2>;
890 bias-disable;
891 };
892
893 edp_bridge_irq_default: edp-bridge-irq-default-state {
894 pins = "gpio11";
895 function = "gpio";
896 drive-strength = <2>;
897 bias-pull-down;
898 };
899
900 hid_keyboard_default: hid-keyboard-default-state {
901 pins = "gpio33";
902 function = "gpio";
903 drive-strength = <2>;
904 bias-disable;
905 };
906
907 hid_touchpad_default: hid-touchpad-default-state {
908 pins = "gpio94";
909 function = "gpio";
910 drive-strength = <2>;
911 bias-disable;
912 };
913
914 qup_uart3_sleep: qup-uart3-sleep-state {
915 cts-pins {
916 /*
917 * Configure a pull-down on CTS to match the pull of
918 * the Bluetooth module.
919 */
920 pins = "gpio38";
921 function = "gpio";
922 bias-pull-down;
923 };
924
925 rts-pins {
926 /*
927 * Configure pull-down on RTS. As RTS is active low
928 * signal, pull it low to indicate the BT SoC that it
929 * can wakeup the system anytime from suspend state by
930 * pulling RX low (by sending wakeup bytes).
931 */
932 pins = "gpio39";
933 function = "gpio";
934 bias-pull-down;
935 };
936
937 tx-pins {
938 /*
939 * Configure pull-up on TX when it isn't actively driven
940 * to prevent BT SoC from receiving garbage during sleep.
941 */
942 pins = "gpio40";
943 function = "gpio";
944 bias-pull-up;
945 };
946
947 rx-pins {
948 /*
949 * Configure a pull-up on RX. This is needed to avoid
950 * garbage data when the TX pin of the Bluetooth module
951 * is floating which may cause spurious wakeups.
952 */
953 pins = "gpio41";
954 function = "gpio";
955 bias-pull-up;
956 };
957 };
958
959 reg_edp_1p2_en_default: reg-edp-1p2-en-deault-state {
960 pins = "gpio19";
961 function = "gpio";
962 drive-strength = <16>;
963 bias-disable;
964 };
965
966 reg_edp_1p8_en_default: reg-edp-1p8-en-deault-state {
967 pins = "gpio20";
968 function = "gpio";
969 drive-strength = <16>;
970 bias-disable;
971 };
972
973 reg_lcm_en_default: reg-lcm-en-deault-state {
974 pins = "gpio26";
975 function = "gpio";
976 drive-strength = <16>;
977 bias-disable;
978 };
979
980 reg_audio_en_default: reg-audio-en-deault-state {
981 pins = "gpio83";
982 function = "gpio";
983 drive-strength = <2>;
984 bias-disable;
985 };
986
987 reg_tp_en_default: reg-tp-en-deault-state {
988 pins = "gpio25";
989 function = "gpio";
990 drive-strength = <2>;
991 bias-disable;
992 };
993
994 soc_bkoff_default: soc-bkoff-deault-state {
995 pins = "gpio10";
996 function = "gpio";
997 drive-strength = <16>;
998 bias-disable;
999 };
1000
1001 sdc1_default: sdc1-default-state {
1002 clk-pins {
1003 pins = "sdc1_clk";
1004 drive-strength = <16>;
1005 bias-disable;
1006 };
1007
1008 cmd-pins {
1009 pins = "sdc1_cmd";
1010 drive-strength = <16>;
1011 bias-pull-up;
1012 };
1013
1014 data-pins {
1015 pins = "sdc1_data";
1016 drive-strength = <16>;
1017 bias-pull-up;
1018 };
1019
1020 rclk-pins {
1021 pins = "sdc1_rclk";
1022 bias-pull-down;
1023 };
1024 };
1025
1026 sdc1_sleep: sdc1-sleep-state {
1027 clk-pins {
1028 pins = "sdc1_clk";
1029 drive-strength = <2>;
1030 bias-disable;
1031 };
1032
1033 cmd-pins {
1034 pins = "sdc1_cmd";
1035 drive-strength = <2>;
1036 bias-pull-up;
1037 };
1038
1039 data-pins {
1040 pins = "sdc1_data";
1041 drive-strength = <2>;
1042 bias-pull-up;
1043 };
1044
1045 rclk-pins {
1046 pins = "sdc1_rclk";
1047 bias-pull-down;
1048 };
1049 };
1050 };