Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/sar2130p-qar2130p.dts

raw
1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2024, Linaro Limited
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10 #include "sar2130p.dtsi"
11 #include "pm8150.dtsi"
12
13 / {
14 model = "Qualcomm Snapdragon AR2 Gen1 Smart Viewer Development Kit";
15 compatible = "qcom,qar2130p", "qcom,sar2130p";
16 chassis-type = "embedded";
17
18 aliases {
19 serial0 = &uart11;
20 serial1 = &uart7;
21 i2c0 = &i2c8;
22 i2c1 = &i2c10;
23 mmc1 = &sdhc_1;
24 spi0 = &spi0;
25 };
26
27 chosen {
28 stdout-path = "serial0:115200n8";
29 };
30
31 vph_pwr: regulator-vph-pwr {
32 compatible = "regulator-fixed";
33 regulator-name = "vph_pwr";
34 regulator-min-microvolt = <3700000>;
35 regulator-max-microvolt = <3700000>;
36 regulator-always-on;
37 };
38
39 /* pm3003a on I2C0, should not be controlled */
40 vreg_ext_1p3: regulator-ext-1p3 {
41 compatible = "regulator-fixed";
42 regulator-name = "vph_ext_1p3";
43 regulator-min-microvolt = <1300000>;
44 regulator-max-microvolt = <1300000>;
45 regulator-always-on;
46 vin-supply = <&vph_pwr>;
47 };
48
49 /* EBI rail, used as LDO input, can not be part of PMIC config */
50 vreg_s10a_0p89: regulator-s10a-0p89 {
51 compatible = "regulator-fixed";
52 regulator-name = "vph_s10a_0p89";
53 regulator-min-microvolt = <890000>;
54 regulator-max-microvolt = <890000>;
55 regulator-always-on;
56 vin-supply = <&vph_pwr>;
57 };
58
59 thermal-zones {
60 sar2130p-thermal {
61 thermal-sensors = <&pm8150_adc_tm 1>;
62
63 trips {
64 active-config0 {
65 temperature = <100000>;
66 hysteresis = <1000>;
67 type = "critical";
68 };
69 };
70 };
71
72 wifi-thermal {
73 thermal-sensors = <&pm8150_adc_tm 2>;
74
75 trips {
76 active-config0 {
77 temperature = <52000>;
78 hysteresis = <4000>;
79 type = "passive";
80 };
81 };
82 };
83
84 xo-thermal {
85 thermal-sensors = <&pm8150_adc_tm 0>;
86
87 trips {
88 active-config0 {
89 temperature = <50000>;
90 hysteresis = <4000>;
91 type = "passive";
92 };
93 };
94 };
95 };
96
97 wcn7850-pmu {
98 compatible = "qcom,wcn7850-pmu";
99
100 pinctrl-0 = <&wlan_en_state>, <&bt_en_state>;
101 pinctrl-names = "default";
102
103 wlan-enable-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
104 bt-enable-gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
105
106 vdd-supply = <&vreg_s4a_0p95>;
107 vddio-supply = <&vreg_l15a_1p8>;
108 vddaon-supply = <&vreg_s4a_0p95>;
109 vdddig-supply = <&vreg_s4a_0p95>;
110 vddrfa1p2-supply = <&vreg_s4a_0p95>;
111 vddrfa1p8-supply = <&vreg_s5a_1p88>;
112
113 regulators {
114 vreg_pmu_rfa_cmn: ldo0 {
115 regulator-name = "vreg_pmu_rfa_cmn";
116 };
117
118 vreg_pmu_aon_0p59: ldo1 {
119 regulator-name = "vreg_pmu_aon_0p59";
120 };
121
122 vreg_pmu_wlcx_0p8: ldo2 {
123 regulator-name = "vreg_pmu_wlcx_0p8";
124 };
125
126 vreg_pmu_wlmx_0p85: ldo3 {
127 regulator-name = "vreg_pmu_wlmx_0p85";
128 };
129
130 vreg_pmu_btcmx_0p85: ldo4 {
131 regulator-name = "vreg_pmu_btcmx_0p85";
132 };
133
134 vreg_pmu_rfa_0p8: ldo5 {
135 regulator-name = "vreg_pmu_rfa_0p8";
136 };
137
138 vreg_pmu_rfa_1p2: ldo6 {
139 regulator-name = "vreg_pmu_rfa_1p2";
140 };
141
142 vreg_pmu_rfa_1p8: ldo7 {
143 regulator-name = "vreg_pmu_rfa_1p8";
144 };
145
146 vreg_pmu_pcie_0p9: ldo8 {
147 regulator-name = "vreg_pmu_pcie_0p9";
148 };
149
150 vreg_pmu_pcie_1p8: ldo9 {
151 regulator-name = "vreg_pmu_pcie_1p8";
152 };
153 };
154 };
155 };
156
157 &apps_rsc {
158 regulators-0 {
159 compatible = "qcom,pm8150-rpmh-regulators";
160 qcom,pmic-id = "a";
161
162 vdd-s1-supply = <&vph_pwr>;
163 vdd-s2-supply = <&vph_pwr>;
164 vdd-s3-supply = <&vph_pwr>;
165 vdd-s4-supply = <&vph_pwr>;
166 vdd-s5-supply = <&vph_pwr>;
167 vdd-s6-supply = <&vph_pwr>;
168 vdd-s7-supply = <&vph_pwr>;
169 vdd-s8-supply = <&vph_pwr>;
170 vdd-s9-supply = <&vph_pwr>;
171 vdd-s10-supply = <&vph_pwr>;
172 vdd-l1-l8-l11-supply = <&vreg_s4a_0p95>;
173 vdd-l3-l4-l5-l18-supply = <&vreg_ext_1p3>;
174 vdd-l6-l9-supply = <&vreg_s10a_0p89>;
175 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p88>;
176
177 vreg_s4a_0p95: smps6 {
178 regulator-name = "vreg_s4a_0p95";
179 regulator-min-microvolt = <950000>;
180 regulator-max-microvolt = <1170000>;
181 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
182 };
183
184 vreg_s5a_1p88: smps5 {
185 regulator-name = "vreg_s5a_1p88";
186 regulator-min-microvolt = <1856000>;
187 regulator-max-microvolt = <2040000>;
188 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
189 };
190
191 vreg_l1a_0p91: ldo1 {
192 regulator-name = "vreg_l1a_0p91";
193 regulator-min-microvolt = <912000>;
194 regulator-max-microvolt = <920000>;
195 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
196 };
197
198 vreg_l2a_3p1: ldo2 {
199 regulator-name = "vreg_l2a_3p1";
200 regulator-min-microvolt = <3080000>;
201 regulator-max-microvolt = <3544000>;
202 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
203 };
204
205 vreg_l3a_1p2: ldo3 {
206 regulator-name = "vreg_l3a_1p2";
207 regulator-min-microvolt = <1200000>;
208 regulator-max-microvolt = <1304000>;
209 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
210 };
211
212 /* ldo4 1.26 - system ? */
213
214 vreg_l5a_1p13: ldo5 {
215 regulator-name = "vreg_l5a_1p13";
216 regulator-min-microvolt = <1128000>;
217 regulator-max-microvolt = <1170000>;
218 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
219 };
220
221 vreg_l6a_0p6: ldo6 {
222 regulator-name = "vreg_l6a_0p6";
223 regulator-min-microvolt = <600000>;
224 regulator-max-microvolt = <650000>;
225 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
226 };
227
228 vreg_l7a_1p8: ldo7 {
229 regulator-name = "vreg_l7a_1p8";
230 regulator-min-microvolt = <1800000>;
231 regulator-max-microvolt = <1950000>;
232 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
233 };
234
235 vreg_l8a_0p88: ldo8 {
236 regulator-name = "vreg_l8a_0p88";
237 regulator-min-microvolt = <880000>;
238 regulator-max-microvolt = <950000>;
239 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
240 };
241
242 /* ldo9 - LCX */
243
244 vreg_l10a_2p95: ldo10 {
245 regulator-name = "vreg_l10a_2p95";
246 regulator-min-microvolt = <2952000>;
247 regulator-max-microvolt = <3544000>;
248 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
249 };
250
251 /* ldo11 - LMX */
252
253 vreg_l12a_1p8: ldo12 {
254 regulator-name = "vreg_l12a_1p8";
255 regulator-min-microvolt = <1800000>;
256 regulator-max-microvolt = <1880000>;
257 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
258 };
259
260 /* no ldo13 */
261
262 vreg_l14a_1p8: ldo14 {
263 regulator-name = "vreg_l14a_1p8";
264 regulator-min-microvolt = <1800000>;
265 regulator-max-microvolt = <1880000>;
266 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
267 };
268
269 vreg_l15a_1p8: ldo15 {
270 regulator-name = "vreg_l15a_1p8";
271 regulator-min-microvolt = <1800000>;
272 regulator-max-microvolt = <1800000>;
273 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
274 };
275
276 /* no ldo16 - system */
277
278 vreg_l17a_3p26: ldo17 {
279 regulator-name = "vreg_l17a_3p26";
280 regulator-min-microvolt = <3200000>;
281 regulator-max-microvolt = <3544000>;
282 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
283 };
284
285 vreg_l18a_1p2: ldo18 {
286 regulator-name = "vreg_l18a_1p2";
287 regulator-min-microvolt = <1200000>;
288 regulator-max-microvolt = <1304000>;
289 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
290 };
291 };
292
293 };
294
295 &gpi_dma0 {
296 status = "okay";
297 };
298
299 &gpi_dma1 {
300 status = "okay";
301 };
302
303 &gpu {
304 status = "okay";
305 };
306
307 &gpu_zap_shader {
308 firmware-name = "qcom/sar2130p/a620_zap.mbn";
309 };
310
311 &pon_pwrkey {
312 status = "okay";
313 };
314
315 &pon_resin {
316 linux,code = <KEY_VOLUMEDOWN>;
317
318 status = "okay";
319 };
320
321 &qupv3_id_0 {
322 status = "okay";
323 };
324
325 &qupv3_id_1 {
326 status = "okay";
327 };
328
329 &i2c4 {
330 clock-frequency = <400000>;
331
332 status = "okay";
333 };
334
335 &i2c8 {
336 clock-frequency = <400000>;
337
338 status = "okay";
339
340 ptn3222: redriver@4f {
341 compatible = "nxp,ptn3222";
342 reg = <0x4f>;
343
344 reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
345
346 vdd3v3-supply = <&vreg_l2a_3p1>;
347 vdd1v8-supply = <&vreg_l15a_1p8>;
348
349 #phy-cells = <0>;
350 };
351 };
352
353 &i2c10 {
354 clock-frequency = <400000>;
355
356 status = "okay";
357 };
358
359 &pcie0 {
360 perst-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
361 wake-gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
362
363 pinctrl-0 = <&pcie0_default_state>;
364 pinctrl-names = "default";
365
366 status = "okay";
367 };
368
369 &pcieport0 {
370 wifi@0 {
371 compatible = "pci17cb,1107";
372 reg = <0x10000 0x0 0x0 0x0 0x0>;
373
374 vddaon-supply = <&vreg_pmu_aon_0p59>;
375 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
376 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
377 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
378 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
379 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
380 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
381 vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
382 vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
383 };
384 };
385
386 &pcie0_phy {
387 vdda-phy-supply = <&vreg_l8a_0p88>;
388 vdda-pll-supply = <&vreg_l3a_1p2>;
389
390 status = "okay";
391 };
392
393 &pm8150_adc {
394 channel@4c {
395 reg = <ADC5_XO_THERM_100K_PU>;
396 qcom,ratiometric;
397 qcom,hw-settle-time = <200>;
398 label = "xo_therm";
399 };
400
401 channel@4d {
402 reg = <ADC5_AMUX_THM1_100K_PU>;
403 qcom,ratiometric;
404 qcom,hw-settle-time = <200>;
405 qcom,pre-scaling = <1 1>;
406 label = "skin_therm";
407 };
408
409 channel@4e {
410 /* msm-5.10 uses ADC5_AMUX_THM2 / 0x0e, although there is a pullup */
411 reg = <ADC5_AMUX_THM2_100K_PU>;
412 qcom,hw-settle-time = <200>;
413 qcom,pre-scaling = <1 1>;
414 label = "wifi_therm";
415 };
416 };
417
418 &pm8150_adc_tm {
419 status = "okay";
420
421 xo-therm@0 {
422 reg = <0>;
423 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
424 qcom,ratiometric;
425 qcom,hw-settle-time-us = <200>;
426 };
427
428 skin-therm@1 {
429 reg = <1>;
430 io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>;
431 qcom,ratiometric;
432 qcom,hw-settle-time-us = <200>;
433 };
434
435 wifi-therm@2 {
436 reg = <2>;
437 /* msm-5.10 uses ADC5_AMUX_THM2, although there is a pullup */
438 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
439 qcom,hw-settle-time-us = <200>;
440 };
441 };
442
443 &remoteproc_adsp {
444 firmware-name = "qcom/sar2130p/adsp.mbn";
445
446 status = "okay";
447 };
448
449 &sdhc_1 {
450 vmmc-supply = <&vreg_l10a_2p95>;
451 vqmmc-supply = <&vreg_l7a_1p8>;
452
453 status = "okay";
454 };
455
456 &tlmm {
457 bt_en_state: bt-enable-state {
458 pins = "gpio46";
459 function = "gpio";
460 drive-strength = <16>;
461 bias-disable;
462 };
463
464 pcie0_default_state: pcie0-default-state {
465 perst-pins {
466 pins = "gpio55";
467 function = "gpio";
468 drive-strength = <2>;
469 bias-pull-down;
470 };
471
472 clkreq-pins {
473 pins = "gpio56";
474 function = "pcie0_clkreqn";
475 drive-strength = <2>;
476 bias-pull-up;
477 };
478
479 wake-pins {
480 pins = "gpio57";
481 function = "gpio";
482 drive-strength = <2>;
483 bias-pull-up;
484 };
485 };
486
487 pcie1_default_state: pcie1-default-state {
488 perst-pins {
489 pins = "gpio58";
490 function = "gpio";
491 drive-strength = <2>;
492 bias-pull-down;
493 };
494
495 clkreq-pins {
496 pins = "gpio59";
497 function = "pcie1_clkreqn";
498 drive-strength = <2>;
499 bias-pull-up;
500 };
501
502 wake-pins {
503 pins = "gpio60";
504 function = "gpio";
505 drive-strength = <2>;
506 bias-pull-up;
507 };
508 };
509
510 wlan_en_state: wlan-enable-state {
511 pins = "gpio45";
512 function = "gpio";
513 drive-strength = <16>;
514 bias-disable;
515 };
516 };
517
518 &uart7 {
519 status = "okay";
520
521 bluetooth {
522 compatible = "qcom,wcn7850-bt";
523
524 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
525 vddaon-supply = <&vreg_pmu_aon_0p59>;
526 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
527 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
528 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
529 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
530 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
531
532 max-speed = <3200000>;
533 };
534 };
535
536 &uart11 {
537 status = "okay";
538 };
539
540 &usb_1 {
541 status = "okay";
542 };
543
544 &usb_1_hsphy {
545 vdd-supply = <&vreg_l8a_0p88>;
546 vdda12-supply = <&vreg_l3a_1p2>;
547
548 phys = <&ptn3222>;
549
550 status = "okay";
551 };
552
553 &usb_dp_qmpphy {
554 vdda-phy-supply = <&vreg_l3a_1p2>;
555 vdda-pll-supply = <&vreg_l1a_0p91>;
556
557 status = "okay";
558 };