| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2021, The Linux Foundation. All rights reserved. |
| 4 |
* Copyright (c) 2022, Linaro Limited |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| 11 |
|
| 12 |
#include "sa8540p.dtsi" |
| 13 |
#include "sa8540p-pmics.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Qualcomm SA8540P Ride"; |
| 17 |
compatible = "qcom,sa8540p-ride", "qcom,sa8540p"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
i2c0 = &i2c0; |
| 21 |
i2c1 = &i2c1; |
| 22 |
i2c12 = &i2c12; |
| 23 |
i2c15 = &i2c15; |
| 24 |
i2c18 = &i2c18; |
| 25 |
serial0 = &uart17; |
| 26 |
}; |
| 27 |
|
| 28 |
chosen { |
| 29 |
stdout-path = "serial0:115200n8"; |
| 30 |
}; |
| 31 |
}; |
| 32 |
|
| 33 |
&apps_rsc { |
| 34 |
regulators-0 { |
| 35 |
compatible = "qcom,pm8150-rpmh-regulators"; |
| 36 |
qcom,pmic-id = "a"; |
| 37 |
|
| 38 |
vreg_l3a: ldo3 { |
| 39 |
regulator-name = "vreg_l3a"; |
| 40 |
regulator-min-microvolt = <1200000>; |
| 41 |
regulator-max-microvolt = <1208000>; |
| 42 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 43 |
}; |
| 44 |
|
| 45 |
vreg_l5a: ldo5 { |
| 46 |
regulator-name = "vreg_l5a"; |
| 47 |
regulator-min-microvolt = <912000>; |
| 48 |
regulator-max-microvolt = <912000>; |
| 49 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 50 |
}; |
| 51 |
|
| 52 |
vreg_l7a: ldo7 { |
| 53 |
regulator-name = "vreg_l7a"; |
| 54 |
regulator-min-microvolt = <1800000>; |
| 55 |
regulator-max-microvolt = <1800000>; |
| 56 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 57 |
}; |
| 58 |
|
| 59 |
vreg_l11a: ldo11 { |
| 60 |
regulator-name = "vreg_l11a"; |
| 61 |
regulator-min-microvolt = <880000>; |
| 62 |
regulator-max-microvolt = <880000>; |
| 63 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 64 |
}; |
| 65 |
|
| 66 |
vreg_l13a: ldo13 { |
| 67 |
regulator-name = "vreg_l13a"; |
| 68 |
regulator-min-microvolt = <3072000>; |
| 69 |
regulator-max-microvolt = <3072000>; |
| 70 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 71 |
}; |
| 72 |
}; |
| 73 |
|
| 74 |
regulators-1 { |
| 75 |
compatible = "qcom,pm8150-rpmh-regulators"; |
| 76 |
qcom,pmic-id = "c"; |
| 77 |
|
| 78 |
vreg_l1c: ldo1 { |
| 79 |
regulator-name = "vreg_l1c"; |
| 80 |
regulator-min-microvolt = <912000>; |
| 81 |
regulator-max-microvolt = <912000>; |
| 82 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 83 |
}; |
| 84 |
|
| 85 |
vreg_l2c: ldo2 { |
| 86 |
regulator-name = "vreg_l2c"; |
| 87 |
regulator-min-microvolt = <3072000>; |
| 88 |
regulator-max-microvolt = <3072000>; |
| 89 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 90 |
}; |
| 91 |
|
| 92 |
vreg_l4c: ldo4 { |
| 93 |
regulator-name = "vreg_l4c"; |
| 94 |
regulator-min-microvolt = <1200000>; |
| 95 |
regulator-max-microvolt = <1208000>; |
| 96 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 97 |
}; |
| 98 |
|
| 99 |
vreg_l6c: ldo6 { |
| 100 |
regulator-name = "vreg_l6c"; |
| 101 |
regulator-min-microvolt = <1200000>; |
| 102 |
regulator-max-microvolt = <1200000>; |
| 103 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 104 |
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| 105 |
RPMH_REGULATOR_MODE_HPM>; |
| 106 |
regulator-allow-set-load; |
| 107 |
}; |
| 108 |
|
| 109 |
vreg_l7c: ldo7 { |
| 110 |
regulator-name = "vreg_l7c"; |
| 111 |
regulator-min-microvolt = <1800000>; |
| 112 |
regulator-max-microvolt = <1800000>; |
| 113 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 114 |
}; |
| 115 |
|
| 116 |
vreg_l17c: ldo17 { |
| 117 |
regulator-name = "vreg_l17c"; |
| 118 |
regulator-min-microvolt = <2504000>; |
| 119 |
regulator-max-microvolt = <2504000>; |
| 120 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 121 |
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| 122 |
RPMH_REGULATOR_MODE_HPM>; |
| 123 |
regulator-allow-set-load; |
| 124 |
}; |
| 125 |
}; |
| 126 |
|
| 127 |
regulators-2 { |
| 128 |
compatible = "qcom,pm8150-rpmh-regulators"; |
| 129 |
qcom,pmic-id = "g"; |
| 130 |
|
| 131 |
vreg_l3g: ldo3 { |
| 132 |
regulator-name = "vreg_l3g"; |
| 133 |
regulator-min-microvolt = <1200000>; |
| 134 |
regulator-max-microvolt = <1200000>; |
| 135 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 136 |
}; |
| 137 |
|
| 138 |
vreg_l7g: ldo7 { |
| 139 |
regulator-name = "vreg_l7g"; |
| 140 |
regulator-min-microvolt = <1800000>; |
| 141 |
regulator-max-microvolt = <1800000>; |
| 142 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 143 |
}; |
| 144 |
|
| 145 |
vreg_l8g: ldo8 { |
| 146 |
regulator-name = "vreg_l8g"; |
| 147 |
regulator-min-microvolt = <880000>; |
| 148 |
regulator-max-microvolt = <880000>; |
| 149 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 150 |
}; |
| 151 |
}; |
| 152 |
}; |
| 153 |
|
| 154 |
ðernet0 { |
| 155 |
snps,mtl-rx-config = <ðernet0_mtl_rx_setup>; |
| 156 |
snps,mtl-tx-config = <ðernet0_mtl_tx_setup>; |
| 157 |
|
| 158 |
phy-handle = <&rgmii_phy>; |
| 159 |
phy-mode = "rgmii-txid"; |
| 160 |
|
| 161 |
pinctrl-names = "default"; |
| 162 |
pinctrl-0 = <ðernet0_default>; |
| 163 |
|
| 164 |
status = "okay"; |
| 165 |
|
| 166 |
mdio { |
| 167 |
compatible = "snps,dwmac-mdio"; |
| 168 |
#address-cells = <1>; |
| 169 |
#size-cells = <0>; |
| 170 |
|
| 171 |
/* Marvell 88EA1512 */ |
| 172 |
rgmii_phy: phy@8 { |
| 173 |
compatible = "ethernet-phy-id0141.0dd4"; |
| 174 |
reg = <0x8>; |
| 175 |
|
| 176 |
interrupts-extended = <&tlmm 127 IRQ_TYPE_EDGE_FALLING>; |
| 177 |
|
| 178 |
reset-gpios = <&pmm8540c_gpios 1 GPIO_ACTIVE_LOW>; |
| 179 |
reset-assert-us = <11000>; |
| 180 |
reset-deassert-us = <70000>; |
| 181 |
|
| 182 |
device_type = "ethernet-phy"; |
| 183 |
|
| 184 |
/* Set to RGMII_SGMII mode and soft reset. Turn off auto-negotiation |
| 185 |
* from userspace to talk to the switch on the SGMII side of things |
| 186 |
*/ |
| 187 |
marvell,reg-init = |
| 188 |
/* Set MODE[2:0] to RGMII_SGMII */ |
| 189 |
<0x12 0x14 0xfff8 0x4>, |
| 190 |
/* Soft reset required after changing MODE[2:0] */ |
| 191 |
<0x12 0x14 0x7fff 0x8000>; |
| 192 |
}; |
| 193 |
}; |
| 194 |
|
| 195 |
ethernet0_mtl_rx_setup: rx-queues-config { |
| 196 |
snps,rx-queues-to-use = <1>; |
| 197 |
snps,rx-sched-sp; |
| 198 |
|
| 199 |
queue0 { |
| 200 |
snps,dcb-algorithm; |
| 201 |
snps,map-to-dma-channel = <0x0>; |
| 202 |
snps,route-up; |
| 203 |
snps,priority = <0x1>; |
| 204 |
}; |
| 205 |
|
| 206 |
queue1 { |
| 207 |
snps,dcb-algorithm; |
| 208 |
snps,map-to-dma-channel = <0x1>; |
| 209 |
snps,route-ptp; |
| 210 |
}; |
| 211 |
|
| 212 |
queue2 { |
| 213 |
snps,avb-algorithm; |
| 214 |
snps,map-to-dma-channel = <0x2>; |
| 215 |
snps,route-avcp; |
| 216 |
}; |
| 217 |
|
| 218 |
queue3 { |
| 219 |
snps,avb-algorithm; |
| 220 |
snps,map-to-dma-channel = <0x3>; |
| 221 |
snps,priority = <0xc>; |
| 222 |
}; |
| 223 |
}; |
| 224 |
|
| 225 |
ethernet0_mtl_tx_setup: tx-queues-config { |
| 226 |
snps,tx-queues-to-use = <1>; |
| 227 |
|
| 228 |
queue0 { |
| 229 |
snps,dcb-algorithm; |
| 230 |
}; |
| 231 |
|
| 232 |
queue1 { |
| 233 |
snps,dcb-algorithm; |
| 234 |
}; |
| 235 |
|
| 236 |
queue2 { |
| 237 |
snps,avb-algorithm; |
| 238 |
snps,send_slope = <0x1000>; |
| 239 |
snps,idle_slope = <0x1000>; |
| 240 |
snps,high_credit = <0x3e800>; |
| 241 |
snps,low_credit = <0xffc18000>; |
| 242 |
}; |
| 243 |
|
| 244 |
queue3 { |
| 245 |
snps,avb-algorithm; |
| 246 |
snps,send_slope = <0x1000>; |
| 247 |
snps,idle_slope = <0x1000>; |
| 248 |
snps,high_credit = <0x3e800>; |
| 249 |
snps,low_credit = <0xffc18000>; |
| 250 |
}; |
| 251 |
}; |
| 252 |
}; |
| 253 |
|
| 254 |
ðernet1 { |
| 255 |
snps,mtl-rx-config = <ðernet1_mtl_rx_setup>; |
| 256 |
snps,mtl-tx-config = <ðernet1_mtl_tx_setup>; |
| 257 |
|
| 258 |
phy-mode = "rgmii-txid"; |
| 259 |
|
| 260 |
pinctrl-names = "default"; |
| 261 |
pinctrl-0 = <ðernet1_default>; |
| 262 |
|
| 263 |
status = "okay"; |
| 264 |
|
| 265 |
fixed-link { |
| 266 |
speed = <1000>; |
| 267 |
full-duplex; |
| 268 |
}; |
| 269 |
|
| 270 |
ethernet1_mtl_rx_setup: rx-queues-config { |
| 271 |
snps,rx-queues-to-use = <1>; |
| 272 |
snps,rx-sched-sp; |
| 273 |
|
| 274 |
queue0 { |
| 275 |
snps,dcb-algorithm; |
| 276 |
snps,map-to-dma-channel = <0x0>; |
| 277 |
snps,route-up; |
| 278 |
snps,priority = <0x1>; |
| 279 |
}; |
| 280 |
|
| 281 |
queue1 { |
| 282 |
snps,dcb-algorithm; |
| 283 |
snps,map-to-dma-channel = <0x1>; |
| 284 |
snps,route-ptp; |
| 285 |
}; |
| 286 |
|
| 287 |
queue2 { |
| 288 |
snps,avb-algorithm; |
| 289 |
snps,map-to-dma-channel = <0x2>; |
| 290 |
snps,route-avcp; |
| 291 |
}; |
| 292 |
|
| 293 |
queue3 { |
| 294 |
snps,avb-algorithm; |
| 295 |
snps,map-to-dma-channel = <0x3>; |
| 296 |
snps,priority = <0xc>; |
| 297 |
}; |
| 298 |
}; |
| 299 |
|
| 300 |
ethernet1_mtl_tx_setup: tx-queues-config { |
| 301 |
snps,tx-queues-to-use = <1>; |
| 302 |
|
| 303 |
queue0 { |
| 304 |
snps,dcb-algorithm; |
| 305 |
}; |
| 306 |
|
| 307 |
queue1 { |
| 308 |
snps,dcb-algorithm; |
| 309 |
}; |
| 310 |
|
| 311 |
queue2 { |
| 312 |
snps,avb-algorithm; |
| 313 |
snps,send_slope = <0x1000>; |
| 314 |
snps,idle_slope = <0x1000>; |
| 315 |
snps,high_credit = <0x3e800>; |
| 316 |
snps,low_credit = <0xffc18000>; |
| 317 |
}; |
| 318 |
|
| 319 |
queue3 { |
| 320 |
snps,avb-algorithm; |
| 321 |
snps,send_slope = <0x1000>; |
| 322 |
snps,idle_slope = <0x1000>; |
| 323 |
snps,high_credit = <0x3e800>; |
| 324 |
snps,low_credit = <0xffc18000>; |
| 325 |
}; |
| 326 |
}; |
| 327 |
}; |
| 328 |
|
| 329 |
&i2c0 { |
| 330 |
pinctrl-names = "default"; |
| 331 |
pinctrl-0 = <&i2c0_default>; |
| 332 |
|
| 333 |
status = "okay"; |
| 334 |
}; |
| 335 |
|
| 336 |
&i2c1 { |
| 337 |
pinctrl-names = "default"; |
| 338 |
pinctrl-0 = <&i2c1_default>; |
| 339 |
|
| 340 |
status = "okay"; |
| 341 |
}; |
| 342 |
|
| 343 |
&i2c12 { |
| 344 |
pinctrl-names = "default"; |
| 345 |
pinctrl-0 = <&i2c12_default>; |
| 346 |
|
| 347 |
status = "okay"; |
| 348 |
}; |
| 349 |
|
| 350 |
&i2c15 { |
| 351 |
pinctrl-names = "default"; |
| 352 |
pinctrl-0 = <&i2c15_default>; |
| 353 |
|
| 354 |
status = "okay"; |
| 355 |
}; |
| 356 |
|
| 357 |
&i2c18 { |
| 358 |
pinctrl-names = "default"; |
| 359 |
pinctrl-0 = <&i2c18_default>; |
| 360 |
|
| 361 |
status = "okay"; |
| 362 |
}; |
| 363 |
|
| 364 |
&pcie2a { |
| 365 |
ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>, |
| 366 |
<0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>, |
| 367 |
<0x03000000 0x5 0x00000000 0x5 0x00000000 0x1 0x00000000>; |
| 368 |
|
| 369 |
perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; |
| 370 |
wake-gpios = <&tlmm 145 GPIO_ACTIVE_HIGH>; |
| 371 |
|
| 372 |
pinctrl-names = "default"; |
| 373 |
pinctrl-0 = <&pcie2a_default>; |
| 374 |
|
| 375 |
status = "disabled"; |
| 376 |
}; |
| 377 |
|
| 378 |
&pcie2a_phy { |
| 379 |
vdda-phy-supply = <&vreg_l11a>; |
| 380 |
vdda-pll-supply = <&vreg_l3a>; |
| 381 |
|
| 382 |
status = "disabled"; |
| 383 |
}; |
| 384 |
|
| 385 |
&pcie3a { |
| 386 |
ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, |
| 387 |
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x20000000>, |
| 388 |
<0x03000000 0x6 0x00000000 0x6 0x00000000 0x2 0x00000000>; |
| 389 |
|
| 390 |
perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; |
| 391 |
wake-gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>; |
| 392 |
|
| 393 |
pinctrl-names = "default"; |
| 394 |
pinctrl-0 = <&pcie3a_default>; |
| 395 |
|
| 396 |
status = "okay"; |
| 397 |
}; |
| 398 |
|
| 399 |
&pcie3a_phy { |
| 400 |
vdda-phy-supply = <&vreg_l11a>; |
| 401 |
vdda-pll-supply = <&vreg_l3a>; |
| 402 |
|
| 403 |
status = "okay"; |
| 404 |
}; |
| 405 |
|
| 406 |
&pmm8540a_rtc { |
| 407 |
nvmem-cells = <&rtc_offset>; |
| 408 |
nvmem-cell-names = "offset"; |
| 409 |
|
| 410 |
status = "okay"; |
| 411 |
}; |
| 412 |
|
| 413 |
&pmm8540c_sdam_2 { |
| 414 |
status = "okay"; |
| 415 |
|
| 416 |
rtc_offset: rtc-offset@a0 { |
| 417 |
reg = <0xa0 0x4>; |
| 418 |
}; |
| 419 |
}; |
| 420 |
|
| 421 |
&qup0 { |
| 422 |
status = "okay"; |
| 423 |
}; |
| 424 |
|
| 425 |
&qup1 { |
| 426 |
status = "okay"; |
| 427 |
}; |
| 428 |
|
| 429 |
&qup2 { |
| 430 |
status = "okay"; |
| 431 |
}; |
| 432 |
|
| 433 |
&remoteproc_nsp0 { |
| 434 |
firmware-name = "qcom/sa8540p/cdsp0.mbn"; |
| 435 |
status = "okay"; |
| 436 |
}; |
| 437 |
|
| 438 |
&remoteproc_nsp1 { |
| 439 |
firmware-name = "qcom/sa8540p/cdsp1.mbn"; |
| 440 |
status = "okay"; |
| 441 |
}; |
| 442 |
|
| 443 |
&uart17 { |
| 444 |
compatible = "qcom,geni-debug-uart"; |
| 445 |
status = "okay"; |
| 446 |
}; |
| 447 |
|
| 448 |
&ufs_mem_hc { |
| 449 |
reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; |
| 450 |
|
| 451 |
vcc-supply = <&vreg_l17c>; |
| 452 |
vccq-supply = <&vreg_l6c>; |
| 453 |
|
| 454 |
status = "okay"; |
| 455 |
}; |
| 456 |
|
| 457 |
&ufs_mem_phy { |
| 458 |
vdda-phy-supply = <&vreg_l8g>; |
| 459 |
vdda-pll-supply = <&vreg_l3g>; |
| 460 |
|
| 461 |
status = "okay"; |
| 462 |
}; |
| 463 |
|
| 464 |
&usb_0 { |
| 465 |
status = "okay"; |
| 466 |
}; |
| 467 |
|
| 468 |
&usb_0_dwc3 { |
| 469 |
dr_mode = "peripheral"; |
| 470 |
}; |
| 471 |
|
| 472 |
&usb_0_hsphy { |
| 473 |
vdda-pll-supply = <&vreg_l5a>; |
| 474 |
vdda18-supply = <&vreg_l7a>; |
| 475 |
vdda33-supply = <&vreg_l13a>; |
| 476 |
|
| 477 |
status = "okay"; |
| 478 |
}; |
| 479 |
|
| 480 |
&usb_0_qmpphy { |
| 481 |
vdda-phy-supply = <&vreg_l3a>; |
| 482 |
vdda-pll-supply = <&vreg_l5a>; |
| 483 |
|
| 484 |
status = "okay"; |
| 485 |
}; |
| 486 |
|
| 487 |
&usb_2_hsphy0 { |
| 488 |
vdda-pll-supply = <&vreg_l5a>; |
| 489 |
vdda18-supply = <&vreg_l7g>; |
| 490 |
vdda33-supply = <&vreg_l13a>; |
| 491 |
|
| 492 |
status = "okay"; |
| 493 |
}; |
| 494 |
|
| 495 |
&usb_2_qmpphy0 { |
| 496 |
vdda-phy-supply = <&vreg_l3a>; |
| 497 |
vdda-pll-supply = <&vreg_l5a>; |
| 498 |
|
| 499 |
status = "okay"; |
| 500 |
}; |
| 501 |
|
| 502 |
&xo_board_clk { |
| 503 |
clock-frequency = <38400000>; |
| 504 |
}; |
| 505 |
|
| 506 |
/* PINCTRL */ |
| 507 |
|
| 508 |
&tlmm { |
| 509 |
ethernet0_default: ethernet0-default-state { |
| 510 |
mdc-pins { |
| 511 |
pins = "gpio175"; |
| 512 |
function = "rgmii_0"; |
| 513 |
drive-strength = <16>; |
| 514 |
bias-pull-up; |
| 515 |
}; |
| 516 |
|
| 517 |
mdio-pins { |
| 518 |
pins = "gpio176"; |
| 519 |
function = "rgmii_0"; |
| 520 |
drive-strength = <16>; |
| 521 |
bias-pull-up; |
| 522 |
}; |
| 523 |
|
| 524 |
rgmii-tx-pins { |
| 525 |
pins = "gpio183", "gpio184", "gpio185", "gpio186", "gpio187", "gpio188"; |
| 526 |
function = "rgmii_0"; |
| 527 |
drive-strength = <16>; |
| 528 |
bias-pull-up; |
| 529 |
}; |
| 530 |
|
| 531 |
rgmii-rx-pins { |
| 532 |
pins = "gpio177", "gpio178", "gpio179", "gpio180", "gpio181", "gpio182"; |
| 533 |
function = "rgmii_0"; |
| 534 |
drive-strength = <16>; |
| 535 |
bias-disable; |
| 536 |
}; |
| 537 |
}; |
| 538 |
|
| 539 |
ethernet1_default: ethernet1-default-state { |
| 540 |
mdc-pins { |
| 541 |
pins = "gpio97"; |
| 542 |
function = "rgmii_1"; |
| 543 |
drive-strength = <16>; |
| 544 |
bias-pull-up; |
| 545 |
}; |
| 546 |
|
| 547 |
mdio-pins { |
| 548 |
pins = "gpio98"; |
| 549 |
function = "rgmii_1"; |
| 550 |
drive-strength = <16>; |
| 551 |
bias-pull-up; |
| 552 |
}; |
| 553 |
|
| 554 |
rgmii-tx-pins { |
| 555 |
pins = "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110"; |
| 556 |
function = "rgmii_1"; |
| 557 |
drive-strength = <16>; |
| 558 |
bias-pull-up; |
| 559 |
}; |
| 560 |
|
| 561 |
rgmii-rx-pins { |
| 562 |
pins = "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104"; |
| 563 |
function = "rgmii_1"; |
| 564 |
drive-strength = <16>; |
| 565 |
bias-disable; |
| 566 |
}; |
| 567 |
}; |
| 568 |
|
| 569 |
i2c0_default: i2c0-default-state { |
| 570 |
/* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */ |
| 571 |
pins = "gpio135", "gpio136"; |
| 572 |
function = "qup0"; |
| 573 |
drive-strength = <2>; |
| 574 |
bias-pull-up; |
| 575 |
}; |
| 576 |
|
| 577 |
i2c1_default: i2c1-default-state { |
| 578 |
/* To PM40028B-F3EI PCIe switch */ |
| 579 |
pins = "gpio158", "gpio159"; |
| 580 |
function = "qup1"; |
| 581 |
drive-strength = <2>; |
| 582 |
bias-pull-up; |
| 583 |
}; |
| 584 |
|
| 585 |
i2c12_default: i2c12-default-state { |
| 586 |
/* To Maxim max20411 */ |
| 587 |
pins = "gpio0", "gpio1"; |
| 588 |
function = "qup12"; |
| 589 |
drive-strength = <2>; |
| 590 |
bias-pull-up; |
| 591 |
}; |
| 592 |
|
| 593 |
i2c15_default: i2c15-default-state { |
| 594 |
/* To display connector (SIP1 only) */ |
| 595 |
pins = "gpio36", "gpio37"; |
| 596 |
function = "qup15"; |
| 597 |
drive-strength = <2>; |
| 598 |
bias-pull-up; |
| 599 |
}; |
| 600 |
|
| 601 |
i2c18_default: i2c18-default-state { |
| 602 |
/* To ASM330LHH IMU (SIP1 only) */ |
| 603 |
pins = "gpio66", "gpio67"; |
| 604 |
function = "qup18"; |
| 605 |
drive-strength = <2>; |
| 606 |
bias-pull-up; |
| 607 |
}; |
| 608 |
|
| 609 |
pcie2a_default: pcie2a-default-state { |
| 610 |
perst-pins { |
| 611 |
pins = "gpio143"; |
| 612 |
function = "gpio"; |
| 613 |
drive-strength = <2>; |
| 614 |
bias-pull-down; |
| 615 |
}; |
| 616 |
|
| 617 |
clkreq-pins { |
| 618 |
pins = "gpio142"; |
| 619 |
function = "pcie2a_clkreq"; |
| 620 |
drive-strength = <2>; |
| 621 |
bias-pull-up; |
| 622 |
}; |
| 623 |
|
| 624 |
wake-pins { |
| 625 |
pins = "gpio145"; |
| 626 |
function = "gpio"; |
| 627 |
drive-strength = <2>; |
| 628 |
bias-pull-up; |
| 629 |
}; |
| 630 |
}; |
| 631 |
|
| 632 |
pcie3a_default: pcie3a-default-state { |
| 633 |
perst-pins { |
| 634 |
pins = "gpio151"; |
| 635 |
function = "gpio"; |
| 636 |
drive-strength = <2>; |
| 637 |
bias-pull-down; |
| 638 |
}; |
| 639 |
|
| 640 |
clkreq-pins { |
| 641 |
pins = "gpio150"; |
| 642 |
function = "pcie3a_clkreq"; |
| 643 |
drive-strength = <2>; |
| 644 |
bias-pull-up; |
| 645 |
}; |
| 646 |
|
| 647 |
wake-pins { |
| 648 |
pins = "gpio56"; |
| 649 |
function = "gpio"; |
| 650 |
drive-strength = <2>; |
| 651 |
bias-pull-up; |
| 652 |
}; |
| 653 |
}; |
| 654 |
}; |