| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2021, The Linux Foundation. All rights reserved. |
| 4 |
* Copyright (c) 2022, Linaro Limited |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| 11 |
#include <dt-bindings/spmi/spmi.h> |
| 12 |
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| 13 |
|
| 14 |
#include "sa8540p.dtsi" |
| 15 |
#include "sa8540p-pmics.dtsi" |
| 16 |
|
| 17 |
/ { |
| 18 |
model = "Qualcomm SA8295P ADP"; |
| 19 |
compatible = "qcom,sa8295p-adp", "qcom,sa8540p"; |
| 20 |
|
| 21 |
aliases { |
| 22 |
serial0 = &uart17; |
| 23 |
}; |
| 24 |
|
| 25 |
chosen { |
| 26 |
stdout-path = "serial0:115200n8"; |
| 27 |
}; |
| 28 |
|
| 29 |
dp2-connector { |
| 30 |
compatible = "dp-connector"; |
| 31 |
label = "DP2"; |
| 32 |
type = "mini"; |
| 33 |
|
| 34 |
hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; |
| 35 |
|
| 36 |
port { |
| 37 |
dp2_connector_in: endpoint { |
| 38 |
remote-endpoint = <&mdss1_dp0_out>; |
| 39 |
}; |
| 40 |
}; |
| 41 |
}; |
| 42 |
|
| 43 |
dp3-connector { |
| 44 |
compatible = "dp-connector"; |
| 45 |
label = "DP3"; |
| 46 |
type = "mini"; |
| 47 |
|
| 48 |
hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; |
| 49 |
|
| 50 |
port { |
| 51 |
dp3_connector_in: endpoint { |
| 52 |
remote-endpoint = <&mdss1_dp1_out>; |
| 53 |
}; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
edp0-connector { |
| 58 |
compatible = "dp-connector"; |
| 59 |
label = "EDP0"; |
| 60 |
type = "mini"; |
| 61 |
|
| 62 |
hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; |
| 63 |
|
| 64 |
port { |
| 65 |
edp0_connector_in: endpoint { |
| 66 |
remote-endpoint = <&mdss0_dp2_out>; |
| 67 |
}; |
| 68 |
}; |
| 69 |
}; |
| 70 |
|
| 71 |
edp1-connector { |
| 72 |
compatible = "dp-connector"; |
| 73 |
label = "EDP1"; |
| 74 |
type = "mini"; |
| 75 |
|
| 76 |
hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; |
| 77 |
|
| 78 |
port { |
| 79 |
edp1_connector_in: endpoint { |
| 80 |
remote-endpoint = <&mdss0_dp3_out>; |
| 81 |
}; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
edp2-connector { |
| 86 |
compatible = "dp-connector"; |
| 87 |
label = "EDP2"; |
| 88 |
type = "mini"; |
| 89 |
|
| 90 |
hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; |
| 91 |
|
| 92 |
port { |
| 93 |
edp2_connector_in: endpoint { |
| 94 |
remote-endpoint = <&mdss1_dp2_out>; |
| 95 |
}; |
| 96 |
}; |
| 97 |
}; |
| 98 |
|
| 99 |
edp3-connector { |
| 100 |
compatible = "dp-connector"; |
| 101 |
label = "EDP3"; |
| 102 |
type = "mini"; |
| 103 |
|
| 104 |
hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; |
| 105 |
|
| 106 |
port { |
| 107 |
edp3_connector_in: endpoint { |
| 108 |
remote-endpoint = <&mdss1_dp3_out>; |
| 109 |
}; |
| 110 |
}; |
| 111 |
}; |
| 112 |
|
| 113 |
regulator-usb2-vbus { |
| 114 |
compatible = "regulator-fixed"; |
| 115 |
regulator-name = "USB2_VBUS"; |
| 116 |
gpio = <&pmm8540c_gpios 9 GPIO_ACTIVE_HIGH>; |
| 117 |
pinctrl-0 = <&usb2_en>; |
| 118 |
pinctrl-names = "default"; |
| 119 |
enable-active-high; |
| 120 |
regulator-always-on; |
| 121 |
}; |
| 122 |
|
| 123 |
regulator-usb3-vbus { |
| 124 |
compatible = "regulator-fixed"; |
| 125 |
regulator-name = "USB3_VBUS"; |
| 126 |
gpio = <&pmm8540e_gpios 5 GPIO_ACTIVE_HIGH>; |
| 127 |
pinctrl-0 = <&usb3_en>; |
| 128 |
pinctrl-names = "default"; |
| 129 |
enable-active-high; |
| 130 |
regulator-always-on; |
| 131 |
}; |
| 132 |
|
| 133 |
regulator-usb4-vbus { |
| 134 |
compatible = "regulator-fixed"; |
| 135 |
regulator-name = "USB4_VBUS"; |
| 136 |
gpio = <&pmm8540g_gpios 5 GPIO_ACTIVE_HIGH>; |
| 137 |
pinctrl-0 = <&usb4_en>; |
| 138 |
pinctrl-names = "default"; |
| 139 |
enable-active-high; |
| 140 |
regulator-always-on; |
| 141 |
}; |
| 142 |
|
| 143 |
regulator-usb5-vbus { |
| 144 |
compatible = "regulator-fixed"; |
| 145 |
regulator-name = "USB5_VBUS"; |
| 146 |
gpio = <&pmm8540g_gpios 9 GPIO_ACTIVE_HIGH>; |
| 147 |
pinctrl-0 = <&usb5_en>; |
| 148 |
pinctrl-names = "default"; |
| 149 |
enable-active-high; |
| 150 |
regulator-always-on; |
| 151 |
}; |
| 152 |
}; |
| 153 |
|
| 154 |
&apps_rsc { |
| 155 |
regulators-0 { |
| 156 |
compatible = "qcom,pm8150-rpmh-regulators"; |
| 157 |
qcom,pmic-id = "a"; |
| 158 |
|
| 159 |
vreg_l3a: ldo3 { |
| 160 |
regulator-name = "vreg_l3a"; |
| 161 |
regulator-min-microvolt = <1200000>; |
| 162 |
regulator-max-microvolt = <1208000>; |
| 163 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 164 |
}; |
| 165 |
|
| 166 |
vreg_l5a: ldo5 { |
| 167 |
regulator-name = "vreg_l5a"; |
| 168 |
regulator-min-microvolt = <912000>; |
| 169 |
regulator-max-microvolt = <912000>; |
| 170 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 171 |
}; |
| 172 |
|
| 173 |
vreg_l7a: ldo7 { |
| 174 |
regulator-name = "vreg_l7a"; |
| 175 |
regulator-min-microvolt = <1800000>; |
| 176 |
regulator-max-microvolt = <1800000>; |
| 177 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 178 |
}; |
| 179 |
|
| 180 |
vreg_l13a: ldo13 { |
| 181 |
regulator-name = "vreg_l13a"; |
| 182 |
regulator-min-microvolt = <3072000>; |
| 183 |
regulator-max-microvolt = <3072000>; |
| 184 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 185 |
}; |
| 186 |
|
| 187 |
vreg_l11a: ldo11 { |
| 188 |
regulator-name = "vreg_l11a"; |
| 189 |
regulator-min-microvolt = <880000>; |
| 190 |
regulator-max-microvolt = <880000>; |
| 191 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 192 |
}; |
| 193 |
}; |
| 194 |
|
| 195 |
regulators-1 { |
| 196 |
compatible = "qcom,pm8150-rpmh-regulators"; |
| 197 |
qcom,pmic-id = "c"; |
| 198 |
|
| 199 |
vreg_l1c: ldo1 { |
| 200 |
regulator-name = "vreg_l1c"; |
| 201 |
regulator-min-microvolt = <912000>; |
| 202 |
regulator-max-microvolt = <912000>; |
| 203 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 204 |
}; |
| 205 |
|
| 206 |
vreg_l2c: ldo2 { |
| 207 |
regulator-name = "vreg_l2c"; |
| 208 |
regulator-min-microvolt = <3072000>; |
| 209 |
regulator-max-microvolt = <3072000>; |
| 210 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 211 |
}; |
| 212 |
|
| 213 |
vreg_l3c: ldo3 { |
| 214 |
regulator-name = "vreg_l3c"; |
| 215 |
regulator-min-microvolt = <1200000>; |
| 216 |
regulator-max-microvolt = <1200000>; |
| 217 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 218 |
regulator-allow-set-load; |
| 219 |
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| 220 |
RPMH_REGULATOR_MODE_HPM>; |
| 221 |
}; |
| 222 |
|
| 223 |
vreg_l4c: ldo4 { |
| 224 |
regulator-name = "vreg_l4c"; |
| 225 |
regulator-min-microvolt = <1200000>; |
| 226 |
regulator-max-microvolt = <1208000>; |
| 227 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 228 |
}; |
| 229 |
|
| 230 |
vreg_l6c: ldo6 { |
| 231 |
regulator-name = "vreg_l6c"; |
| 232 |
regulator-min-microvolt = <1200000>; |
| 233 |
regulator-max-microvolt = <1200000>; |
| 234 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 235 |
regulator-allow-set-load; |
| 236 |
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| 237 |
RPMH_REGULATOR_MODE_HPM>; |
| 238 |
}; |
| 239 |
|
| 240 |
vreg_l7c: ldo7 { |
| 241 |
regulator-name = "vreg_l7c"; |
| 242 |
regulator-min-microvolt = <1800000>; |
| 243 |
regulator-max-microvolt = <1800000>; |
| 244 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 245 |
}; |
| 246 |
|
| 247 |
vreg_l10c: ldo10 { |
| 248 |
regulator-name = "vreg_l10c"; |
| 249 |
regulator-min-microvolt = <2504000>; |
| 250 |
regulator-max-microvolt = <2504000>; |
| 251 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 252 |
regulator-allow-set-load; |
| 253 |
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| 254 |
RPMH_REGULATOR_MODE_HPM>; |
| 255 |
}; |
| 256 |
|
| 257 |
vreg_l17c: ldo17 { |
| 258 |
regulator-name = "vreg_l17c"; |
| 259 |
regulator-min-microvolt = <2504000>; |
| 260 |
regulator-max-microvolt = <2504000>; |
| 261 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 262 |
regulator-allow-set-load; |
| 263 |
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| 264 |
RPMH_REGULATOR_MODE_HPM>; |
| 265 |
}; |
| 266 |
}; |
| 267 |
|
| 268 |
regulators-2 { |
| 269 |
compatible = "qcom,pm8150-rpmh-regulators"; |
| 270 |
qcom,pmic-id = "g"; |
| 271 |
|
| 272 |
vreg_l3g: ldo3 { |
| 273 |
regulator-name = "vreg_l3g"; |
| 274 |
regulator-min-microvolt = <1200000>; |
| 275 |
regulator-max-microvolt = <1200000>; |
| 276 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 277 |
}; |
| 278 |
|
| 279 |
vreg_l7g: ldo7 { |
| 280 |
regulator-name = "vreg_l7g"; |
| 281 |
regulator-min-microvolt = <1800000>; |
| 282 |
regulator-max-microvolt = <1800000>; |
| 283 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 284 |
}; |
| 285 |
|
| 286 |
vreg_l8g: ldo8 { |
| 287 |
regulator-name = "vreg_l8g"; |
| 288 |
regulator-min-microvolt = <912000>; |
| 289 |
regulator-max-microvolt = <912000>; |
| 290 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 291 |
}; |
| 292 |
|
| 293 |
vreg_l11g: ldo11 { |
| 294 |
regulator-name = "vreg_l11g"; |
| 295 |
regulator-min-microvolt = <912000>; |
| 296 |
regulator-max-microvolt = <912000>; |
| 297 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 298 |
}; |
| 299 |
}; |
| 300 |
}; |
| 301 |
|
| 302 |
&dispcc0 { |
| 303 |
status = "okay"; |
| 304 |
}; |
| 305 |
|
| 306 |
&dispcc1 { |
| 307 |
status = "okay"; |
| 308 |
}; |
| 309 |
|
| 310 |
&i2c12 { |
| 311 |
pinctrl-0 = <&qup1_i2c4_state>; |
| 312 |
pinctrl-names = "default"; |
| 313 |
|
| 314 |
status = "okay"; |
| 315 |
|
| 316 |
vdd_gfx: regulator@39 { |
| 317 |
compatible = "maxim,max20411"; |
| 318 |
reg = <0x39>; |
| 319 |
|
| 320 |
regulator-min-microvolt = <800000>; |
| 321 |
regulator-max-microvolt = <800000>; |
| 322 |
|
| 323 |
enable-gpios = <&pmm8540a_gpios 2 GPIO_ACTIVE_HIGH>; |
| 324 |
|
| 325 |
pinctrl-0 = <&max20411_en>; |
| 326 |
pinctrl-names = "default"; |
| 327 |
}; |
| 328 |
}; |
| 329 |
|
| 330 |
&gpucc { |
| 331 |
vdd-gfx-supply = <&vdd_gfx>; |
| 332 |
status = "okay"; |
| 333 |
}; |
| 334 |
|
| 335 |
&gmu { |
| 336 |
status = "okay"; |
| 337 |
}; |
| 338 |
|
| 339 |
&gpu { |
| 340 |
status = "okay"; |
| 341 |
}; |
| 342 |
|
| 343 |
&gpu_zap_shader { |
| 344 |
firmware-name = "qcom/sa8295p/a690_zap.mbn"; |
| 345 |
}; |
| 346 |
|
| 347 |
&gpu_smmu { |
| 348 |
status = "okay"; |
| 349 |
}; |
| 350 |
|
| 351 |
&mdss0 { |
| 352 |
status = "okay"; |
| 353 |
}; |
| 354 |
|
| 355 |
&mdss0_dp2 { |
| 356 |
status = "okay"; |
| 357 |
}; |
| 358 |
|
| 359 |
&mdss0_dp2_out { |
| 360 |
data-lanes = <0 1 2 3>; |
| 361 |
remote-endpoint = <&edp0_connector_in>; |
| 362 |
}; |
| 363 |
|
| 364 |
&mdss0_dp2_phy { |
| 365 |
vdda-phy-supply = <&vreg_l8g>; |
| 366 |
vdda-pll-supply = <&vreg_l3g>; |
| 367 |
|
| 368 |
status = "okay"; |
| 369 |
}; |
| 370 |
|
| 371 |
&mdss0_dp3 { |
| 372 |
status = "okay"; |
| 373 |
}; |
| 374 |
|
| 375 |
&mdss0_dp3_out { |
| 376 |
data-lanes = <0 1 2 3>; |
| 377 |
remote-endpoint = <&edp1_connector_in>; |
| 378 |
}; |
| 379 |
|
| 380 |
&mdss0_dp3_phy { |
| 381 |
vdda-phy-supply = <&vreg_l8g>; |
| 382 |
vdda-pll-supply = <&vreg_l3g>; |
| 383 |
|
| 384 |
status = "okay"; |
| 385 |
}; |
| 386 |
|
| 387 |
&mdss1 { |
| 388 |
status = "okay"; |
| 389 |
}; |
| 390 |
|
| 391 |
&mdss1_dp0 { |
| 392 |
status = "okay"; |
| 393 |
}; |
| 394 |
|
| 395 |
&mdss1_dp0_out { |
| 396 |
data-lanes = <0 1 2 3>; |
| 397 |
remote-endpoint = <&dp2_connector_in>; |
| 398 |
}; |
| 399 |
|
| 400 |
&mdss1_dp0_phy { |
| 401 |
vdda-phy-supply = <&vreg_l11g>; |
| 402 |
vdda-pll-supply = <&vreg_l3g>; |
| 403 |
|
| 404 |
status = "okay"; |
| 405 |
}; |
| 406 |
|
| 407 |
&mdss1_dp1 { |
| 408 |
status = "okay"; |
| 409 |
}; |
| 410 |
|
| 411 |
&mdss1_dp1_out { |
| 412 |
data-lanes = <0 1 2 3>; |
| 413 |
remote-endpoint = <&dp3_connector_in>; |
| 414 |
}; |
| 415 |
|
| 416 |
&mdss1_dp1_phy { |
| 417 |
vdda-phy-supply = <&vreg_l11g>; |
| 418 |
vdda-pll-supply = <&vreg_l3g>; |
| 419 |
|
| 420 |
status = "okay"; |
| 421 |
}; |
| 422 |
|
| 423 |
&mdss1_dp2 { |
| 424 |
status = "okay"; |
| 425 |
}; |
| 426 |
|
| 427 |
&mdss1_dp2_out { |
| 428 |
data-lanes = <0 1 2 3>; |
| 429 |
remote-endpoint = <&edp2_connector_in>; |
| 430 |
}; |
| 431 |
|
| 432 |
&mdss1_dp2_phy { |
| 433 |
vdda-phy-supply = <&vreg_l11g>; |
| 434 |
vdda-pll-supply = <&vreg_l3g>; |
| 435 |
|
| 436 |
status = "okay"; |
| 437 |
}; |
| 438 |
|
| 439 |
&mdss1_dp3 { |
| 440 |
status = "okay"; |
| 441 |
}; |
| 442 |
|
| 443 |
&mdss1_dp3_out { |
| 444 |
data-lanes = <0 1 2 3>; |
| 445 |
remote-endpoint = <&edp3_connector_in>; |
| 446 |
}; |
| 447 |
|
| 448 |
&mdss1_dp3_phy { |
| 449 |
vdda-phy-supply = <&vreg_l11g>; |
| 450 |
vdda-pll-supply = <&vreg_l3g>; |
| 451 |
|
| 452 |
status = "okay"; |
| 453 |
}; |
| 454 |
|
| 455 |
&pcie2a { |
| 456 |
perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; |
| 457 |
wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; |
| 458 |
|
| 459 |
pinctrl-names = "default"; |
| 460 |
pinctrl-0 = <&pcie2a_default>; |
| 461 |
|
| 462 |
status = "okay"; |
| 463 |
}; |
| 464 |
|
| 465 |
&pcie2a_phy { |
| 466 |
vdda-phy-supply = <&vreg_l11a>; |
| 467 |
vdda-pll-supply = <&vreg_l3a>; |
| 468 |
|
| 469 |
status = "okay"; |
| 470 |
}; |
| 471 |
|
| 472 |
&pcie3a { |
| 473 |
num-lanes = <2>; |
| 474 |
|
| 475 |
perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; |
| 476 |
wake-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>; |
| 477 |
|
| 478 |
pinctrl-names = "default"; |
| 479 |
pinctrl-0 = <&pcie3a_default>; |
| 480 |
|
| 481 |
status = "okay"; |
| 482 |
}; |
| 483 |
|
| 484 |
&pcie3a_phy { |
| 485 |
vdda-phy-supply = <&vreg_l11a>; |
| 486 |
vdda-pll-supply = <&vreg_l3a>; |
| 487 |
|
| 488 |
status = "okay"; |
| 489 |
}; |
| 490 |
|
| 491 |
&pcie3b { |
| 492 |
perst-gpios = <&tlmm 153 GPIO_ACTIVE_LOW>; |
| 493 |
wake-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; |
| 494 |
|
| 495 |
pinctrl-names = "default"; |
| 496 |
pinctrl-0 = <&pcie3b_default>; |
| 497 |
|
| 498 |
status = "okay"; |
| 499 |
}; |
| 500 |
|
| 501 |
&pcie3b_phy { |
| 502 |
vdda-phy-supply = <&vreg_l11a>; |
| 503 |
vdda-pll-supply = <&vreg_l3a>; |
| 504 |
|
| 505 |
status = "okay"; |
| 506 |
}; |
| 507 |
|
| 508 |
&pcie4 { |
| 509 |
perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; |
| 510 |
wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; |
| 511 |
|
| 512 |
pinctrl-names = "default"; |
| 513 |
pinctrl-0 = <&pcie4_default>; |
| 514 |
|
| 515 |
status = "okay"; |
| 516 |
}; |
| 517 |
|
| 518 |
&pcie4_phy { |
| 519 |
vdda-phy-supply = <&vreg_l11a>; |
| 520 |
vdda-pll-supply = <&vreg_l3a>; |
| 521 |
|
| 522 |
status = "okay"; |
| 523 |
}; |
| 524 |
|
| 525 |
&qup1 { |
| 526 |
status = "okay"; |
| 527 |
}; |
| 528 |
|
| 529 |
&qup2 { |
| 530 |
status = "okay"; |
| 531 |
}; |
| 532 |
|
| 533 |
&remoteproc_adsp { |
| 534 |
firmware-name = "qcom/sa8540p/adsp.mbn"; |
| 535 |
status = "okay"; |
| 536 |
}; |
| 537 |
|
| 538 |
&remoteproc_nsp0 { |
| 539 |
firmware-name = "qcom/sa8540p/cdsp.mbn"; |
| 540 |
status = "okay"; |
| 541 |
}; |
| 542 |
|
| 543 |
&remoteproc_nsp1 { |
| 544 |
firmware-name = "qcom/sa8540p/cdsp1.mbn"; |
| 545 |
status = "okay"; |
| 546 |
}; |
| 547 |
|
| 548 |
&uart17 { |
| 549 |
compatible = "qcom,geni-debug-uart"; |
| 550 |
status = "okay"; |
| 551 |
}; |
| 552 |
|
| 553 |
&ufs_mem_hc { |
| 554 |
reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; |
| 555 |
|
| 556 |
vcc-supply = <&vreg_l17c>; |
| 557 |
vcc-max-microamp = <800000>; |
| 558 |
vccq-supply = <&vreg_l6c>; |
| 559 |
vccq-max-microamp = <900000>; |
| 560 |
|
| 561 |
status = "okay"; |
| 562 |
}; |
| 563 |
|
| 564 |
&ufs_mem_phy { |
| 565 |
vdda-phy-supply = <&vreg_l8g>; |
| 566 |
vdda-pll-supply = <&vreg_l3g>; |
| 567 |
|
| 568 |
status = "okay"; |
| 569 |
}; |
| 570 |
|
| 571 |
&ufs_card_hc { |
| 572 |
reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>; |
| 573 |
|
| 574 |
vcc-supply = <&vreg_l10c>; |
| 575 |
vcc-max-microamp = <800000>; |
| 576 |
vccq-supply = <&vreg_l3c>; |
| 577 |
vccq-max-microamp = <900000>; |
| 578 |
|
| 579 |
status = "okay"; |
| 580 |
}; |
| 581 |
|
| 582 |
&ufs_card_phy { |
| 583 |
vdda-phy-supply = <&vreg_l8g>; |
| 584 |
vdda-pll-supply = <&vreg_l3g>; |
| 585 |
|
| 586 |
status = "okay"; |
| 587 |
}; |
| 588 |
|
| 589 |
&usb_0 { |
| 590 |
status = "okay"; |
| 591 |
}; |
| 592 |
|
| 593 |
&usb_0_dwc3 { |
| 594 |
/* TODO: Define USB-C connector properly */ |
| 595 |
dr_mode = "peripheral"; |
| 596 |
}; |
| 597 |
|
| 598 |
&usb_0_hsphy { |
| 599 |
vdda-pll-supply = <&vreg_l5a>; |
| 600 |
vdda18-supply = <&vreg_l7a>; |
| 601 |
vdda33-supply = <&vreg_l13a>; |
| 602 |
|
| 603 |
status = "okay"; |
| 604 |
}; |
| 605 |
|
| 606 |
&usb_0_qmpphy { |
| 607 |
vdda-phy-supply = <&vreg_l3a>; |
| 608 |
vdda-pll-supply = <&vreg_l5a>; |
| 609 |
|
| 610 |
status = "okay"; |
| 611 |
}; |
| 612 |
|
| 613 |
&usb_1 { |
| 614 |
status = "okay"; |
| 615 |
}; |
| 616 |
|
| 617 |
&usb_1_dwc3 { |
| 618 |
/* TODO: Define USB-C connector properly */ |
| 619 |
dr_mode = "host"; |
| 620 |
}; |
| 621 |
|
| 622 |
&usb_1_hsphy { |
| 623 |
vdda-pll-supply = <&vreg_l1c>; |
| 624 |
vdda18-supply = <&vreg_l7c>; |
| 625 |
vdda33-supply = <&vreg_l2c>; |
| 626 |
|
| 627 |
status = "okay"; |
| 628 |
}; |
| 629 |
|
| 630 |
&usb_1_qmpphy { |
| 631 |
vdda-phy-supply = <&vreg_l4c>; |
| 632 |
vdda-pll-supply = <&vreg_l1c>; |
| 633 |
|
| 634 |
status = "okay"; |
| 635 |
}; |
| 636 |
|
| 637 |
&usb_2 { |
| 638 |
status = "okay"; |
| 639 |
}; |
| 640 |
|
| 641 |
&usb_2_hsphy0 { |
| 642 |
vdda-pll-supply = <&vreg_l5a>; |
| 643 |
vdda18-supply = <&vreg_l7g>; |
| 644 |
vdda33-supply = <&vreg_l13a>; |
| 645 |
|
| 646 |
status = "okay"; |
| 647 |
}; |
| 648 |
|
| 649 |
&usb_2_hsphy1 { |
| 650 |
vdda-pll-supply = <&vreg_l5a>; |
| 651 |
vdda18-supply = <&vreg_l7g>; |
| 652 |
vdda33-supply = <&vreg_l13a>; |
| 653 |
|
| 654 |
status = "okay"; |
| 655 |
}; |
| 656 |
|
| 657 |
&usb_2_hsphy2 { |
| 658 |
vdda-pll-supply = <&vreg_l5a>; |
| 659 |
vdda18-supply = <&vreg_l7g>; |
| 660 |
vdda33-supply = <&vreg_l13a>; |
| 661 |
|
| 662 |
status = "okay"; |
| 663 |
}; |
| 664 |
|
| 665 |
&usb_2_hsphy3 { |
| 666 |
vdda-pll-supply = <&vreg_l5a>; |
| 667 |
vdda18-supply = <&vreg_l7g>; |
| 668 |
vdda33-supply = <&vreg_l13a>; |
| 669 |
|
| 670 |
status = "okay"; |
| 671 |
}; |
| 672 |
|
| 673 |
&usb_2_qmpphy0 { |
| 674 |
vdda-phy-supply = <&vreg_l3a>; |
| 675 |
vdda-pll-supply = <&vreg_l5a>; |
| 676 |
|
| 677 |
status = "okay"; |
| 678 |
}; |
| 679 |
|
| 680 |
&usb_2_qmpphy1 { |
| 681 |
vdda-phy-supply = <&vreg_l3a>; |
| 682 |
vdda-pll-supply = <&vreg_l5a>; |
| 683 |
|
| 684 |
status = "okay"; |
| 685 |
}; |
| 686 |
|
| 687 |
&xo_board_clk { |
| 688 |
clock-frequency = <38400000>; |
| 689 |
}; |
| 690 |
|
| 691 |
/* PINCTRL */ |
| 692 |
|
| 693 |
&pmm8540a_gpios { |
| 694 |
max20411_en: max20411-en-state { |
| 695 |
pins = "gpio2"; |
| 696 |
function = "normal"; |
| 697 |
output-enable; |
| 698 |
}; |
| 699 |
}; |
| 700 |
|
| 701 |
&pmm8540c_gpios { |
| 702 |
usb2_en: usb2-en-state { |
| 703 |
pins = "gpio9"; |
| 704 |
function = "normal"; |
| 705 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; |
| 706 |
output-enable; |
| 707 |
power-source = <0>; |
| 708 |
}; |
| 709 |
}; |
| 710 |
|
| 711 |
&pmm8540e_gpios { |
| 712 |
usb3_en: usb3-en-state { |
| 713 |
pins = "gpio5"; |
| 714 |
function = "normal"; |
| 715 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; |
| 716 |
output-enable; |
| 717 |
power-source = <0>; |
| 718 |
}; |
| 719 |
}; |
| 720 |
|
| 721 |
&pmm8540g_gpios { |
| 722 |
usb4_en: usb4-en-state { |
| 723 |
pins = "gpio5"; |
| 724 |
function = "normal"; |
| 725 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; |
| 726 |
output-enable; |
| 727 |
power-source = <0>; |
| 728 |
}; |
| 729 |
|
| 730 |
usb5_en: usb5-en-state { |
| 731 |
pins = "gpio9"; |
| 732 |
function = "normal"; |
| 733 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; |
| 734 |
output-enable; |
| 735 |
power-source = <0>; |
| 736 |
}; |
| 737 |
}; |
| 738 |
|
| 739 |
&tlmm { |
| 740 |
pcie2a_default: pcie2a-default-state { |
| 741 |
clkreq-n-pins { |
| 742 |
pins = "gpio142"; |
| 743 |
function = "pcie2a_clkreq"; |
| 744 |
drive-strength = <2>; |
| 745 |
bias-pull-up; |
| 746 |
}; |
| 747 |
|
| 748 |
perst-n-pins { |
| 749 |
pins = "gpio143"; |
| 750 |
function = "gpio"; |
| 751 |
drive-strength = <2>; |
| 752 |
bias-pull-down; |
| 753 |
}; |
| 754 |
|
| 755 |
wake-n-pins { |
| 756 |
pins = "gpio145"; |
| 757 |
function = "gpio"; |
| 758 |
drive-strength = <2>; |
| 759 |
bias-pull-up; |
| 760 |
}; |
| 761 |
}; |
| 762 |
|
| 763 |
pcie3a_default: pcie3a-default-state { |
| 764 |
clkreq-n-pins { |
| 765 |
pins = "gpio150"; |
| 766 |
function = "pcie3a_clkreq"; |
| 767 |
drive-strength = <2>; |
| 768 |
bias-pull-up; |
| 769 |
}; |
| 770 |
|
| 771 |
perst-n-pins { |
| 772 |
pins = "gpio151"; |
| 773 |
function = "gpio"; |
| 774 |
drive-strength = <2>; |
| 775 |
bias-pull-down; |
| 776 |
}; |
| 777 |
|
| 778 |
wake-n-pins { |
| 779 |
pins = "gpio56"; |
| 780 |
function = "gpio"; |
| 781 |
drive-strength = <2>; |
| 782 |
bias-pull-up; |
| 783 |
}; |
| 784 |
}; |
| 785 |
|
| 786 |
pcie3b_default: pcie3b-default-state { |
| 787 |
clkreq-n-pins { |
| 788 |
pins = "gpio152"; |
| 789 |
function = "pcie3b_clkreq"; |
| 790 |
drive-strength = <2>; |
| 791 |
bias-pull-up; |
| 792 |
}; |
| 793 |
|
| 794 |
perst-n-pins { |
| 795 |
pins = "gpio153"; |
| 796 |
function = "gpio"; |
| 797 |
drive-strength = <2>; |
| 798 |
bias-pull-down; |
| 799 |
}; |
| 800 |
|
| 801 |
wake-n-pins { |
| 802 |
pins = "gpio130"; |
| 803 |
function = "gpio"; |
| 804 |
drive-strength = <2>; |
| 805 |
bias-pull-up; |
| 806 |
}; |
| 807 |
}; |
| 808 |
|
| 809 |
pcie4_default: pcie4-default-state { |
| 810 |
clkreq-n-pins { |
| 811 |
pins = "gpio140"; |
| 812 |
function = "pcie4_clkreq"; |
| 813 |
drive-strength = <2>; |
| 814 |
bias-pull-up; |
| 815 |
}; |
| 816 |
|
| 817 |
perst-n-pins { |
| 818 |
pins = "gpio141"; |
| 819 |
function = "gpio"; |
| 820 |
drive-strength = <2>; |
| 821 |
bias-pull-down; |
| 822 |
}; |
| 823 |
|
| 824 |
wake-n-pins { |
| 825 |
pins = "gpio139"; |
| 826 |
function = "gpio"; |
| 827 |
drive-strength = <2>; |
| 828 |
bias-pull-up; |
| 829 |
}; |
| 830 |
}; |
| 831 |
|
| 832 |
qup1_i2c4_state: qup1-i2c4-state { |
| 833 |
pins = "gpio0", "gpio1"; |
| 834 |
function = "qup12"; |
| 835 |
drive-strength = <2>; |
| 836 |
bias-pull-up; |
| 837 |
}; |
| 838 |
}; |