| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| 2 |
/* |
| 3 |
* Copyright (c) 2025, Arduino SRL |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include <dt-bindings/leds/common.h> |
| 9 |
#include "agatti.dtsi" |
| 10 |
#include "pm4125.dtsi" |
| 11 |
|
| 12 |
/delete-node/ &cont_splash_memory; |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "Arduino UnoQ"; |
| 16 |
compatible = "arduino,imola", "qcom,qrb2210", "qcom,qcm2290"; |
| 17 |
chassis-type = "embedded"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
serial0 = &uart4; |
| 21 |
serial1 = &uart2; |
| 22 |
serial2 = &uart3; |
| 23 |
sdhc1 = &sdhc_1; |
| 24 |
}; |
| 25 |
|
| 26 |
chosen { |
| 27 |
stdout-path = "serial0:115200n8"; |
| 28 |
}; |
| 29 |
|
| 30 |
gpio-keys { |
| 31 |
compatible = "gpio-keys"; |
| 32 |
label = "gpio-keys"; |
| 33 |
pinctrl-0 = <&key_volp_n>, <&key_vold_n>; |
| 34 |
pinctrl-names = "default"; |
| 35 |
|
| 36 |
key-volume-up { |
| 37 |
label = "Volume Up"; |
| 38 |
linux,code = <KEY_VOLUMEUP>; |
| 39 |
gpios = <&tlmm 96 GPIO_ACTIVE_LOW>; |
| 40 |
debounce-interval = <15>; |
| 41 |
linux,can-disable; |
| 42 |
wakeup-source; |
| 43 |
}; |
| 44 |
|
| 45 |
key-volume-down { |
| 46 |
label = "Volume Down"; |
| 47 |
linux,code = <KEY_VOLUMEDOWN>; |
| 48 |
gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; |
| 49 |
debounce-interval = <15>; |
| 50 |
linux,can-disable; |
| 51 |
wakeup-source; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
leds: leds { |
| 56 |
compatible = "gpio-leds"; |
| 57 |
|
| 58 |
led-bt { |
| 59 |
label = "unoq:bt-blue2"; |
| 60 |
function = LED_FUNCTION_BLUETOOTH; |
| 61 |
color = <LED_COLOR_ID_BLUE>; |
| 62 |
gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; |
| 63 |
linux,default-trigger = "bluetooth-power"; |
| 64 |
default-state = "off"; |
| 65 |
}; |
| 66 |
|
| 67 |
led-panic { |
| 68 |
label = "unoq:panic-red2"; |
| 69 |
function = LED_FUNCTION_INDICATOR; |
| 70 |
color = <LED_COLOR_ID_RED>; |
| 71 |
gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; |
| 72 |
linux,default-trigger = "none"; |
| 73 |
default-state = "off"; |
| 74 |
panic-indicator; |
| 75 |
}; |
| 76 |
|
| 77 |
led-wlan { |
| 78 |
label = "unoq:wlan-green2"; |
| 79 |
function = LED_FUNCTION_WLAN; |
| 80 |
color = <LED_COLOR_ID_GREEN>; |
| 81 |
gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; |
| 82 |
linux,default-trigger = "phy0tx"; |
| 83 |
default-state = "off"; |
| 84 |
}; |
| 85 |
|
| 86 |
ledb: led-user-blue { |
| 87 |
label = "unoq:user-blue1"; |
| 88 |
gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; |
| 89 |
color = <LED_COLOR_ID_BLUE>; |
| 90 |
}; |
| 91 |
|
| 92 |
ledg: led-user-green { |
| 93 |
label = "unoq:user-green1"; |
| 94 |
gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; |
| 95 |
color = <LED_COLOR_ID_GREEN>; |
| 96 |
}; |
| 97 |
|
| 98 |
ledr: led-user-red { |
| 99 |
label = "unoq:user-red1"; |
| 100 |
gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; |
| 101 |
color = <LED_COLOR_ID_RED>; |
| 102 |
}; |
| 103 |
}; |
| 104 |
|
| 105 |
multi-led { |
| 106 |
compatible = "leds-group-multicolor"; |
| 107 |
color = <LED_COLOR_ID_RGB>; |
| 108 |
function = LED_FUNCTION_INDICATOR; |
| 109 |
leds = <&ledr>, <&ledg>, <&ledb>; |
| 110 |
}; |
| 111 |
|
| 112 |
/* PM4125 charger out, supplied by VBAT */ |
| 113 |
vph_pwr: regulator-vph-pwr { |
| 114 |
compatible = "regulator-fixed"; |
| 115 |
regulator-name = "vph_pwr"; |
| 116 |
regulator-min-microvolt = <3700000>; |
| 117 |
regulator-max-microvolt = <3700000>; |
| 118 |
regulator-always-on; |
| 119 |
regulator-boot-on; |
| 120 |
}; |
| 121 |
}; |
| 122 |
|
| 123 |
&gpi_dma0 { |
| 124 |
status = "okay"; |
| 125 |
}; |
| 126 |
|
| 127 |
&gpu { |
| 128 |
status = "okay"; |
| 129 |
}; |
| 130 |
|
| 131 |
&gpu_zap_shader { |
| 132 |
firmware-name = "qcom/qcm2290/a702_zap.mbn"; |
| 133 |
}; |
| 134 |
|
| 135 |
&i2c0 { |
| 136 |
clock-frequency = <100000>; |
| 137 |
|
| 138 |
status = "okay"; |
| 139 |
}; |
| 140 |
|
| 141 |
&i2c1 { |
| 142 |
clock-frequency = <100000>; |
| 143 |
|
| 144 |
status = "okay"; |
| 145 |
}; |
| 146 |
|
| 147 |
&pm4125_vbus { |
| 148 |
regulator-min-microamp = <500000>; |
| 149 |
regulator-max-microamp = <500000>; |
| 150 |
|
| 151 |
status = "okay"; |
| 152 |
}; |
| 153 |
|
| 154 |
&qupv3_id_0 { |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
&remoteproc_adsp { |
| 159 |
firmware-name = "qcom/qcm2290/adsp.mbn"; |
| 160 |
|
| 161 |
status = "okay"; |
| 162 |
}; |
| 163 |
|
| 164 |
&remoteproc_mpss { |
| 165 |
firmware-name = "qcom/qcm2290/modem.mbn"; |
| 166 |
|
| 167 |
status = "okay"; |
| 168 |
}; |
| 169 |
|
| 170 |
&rpm_requests { |
| 171 |
regulators { |
| 172 |
compatible = "qcom,rpm-pm2250-regulators"; |
| 173 |
vdd_s3-supply = <&vph_pwr>; |
| 174 |
vdd_s4-supply = <&vph_pwr>; |
| 175 |
vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm4125_s3>; |
| 176 |
vdd_l4_l17_l18_l19_l20_l21_l22-supply = <&vph_pwr>; |
| 177 |
vdd_l13_l14_l15_l16-supply = <&pm4125_s4>; |
| 178 |
|
| 179 |
pm4125_s3: s3 { |
| 180 |
/* 0.4V-1.6625V -> 1.3V (Power tree requirements) */ |
| 181 |
regulator-min-microvolt = <1352000>; |
| 182 |
regulator-max-microvolt = <1352000>; |
| 183 |
regulator-boot-on; |
| 184 |
}; |
| 185 |
|
| 186 |
pm4125_s4: s4 { |
| 187 |
/* 1.2V-2.35V -> 2.05V (Power tree requirements) */ |
| 188 |
regulator-min-microvolt = <2072000>; |
| 189 |
regulator-max-microvolt = <2072000>; |
| 190 |
regulator-boot-on; |
| 191 |
}; |
| 192 |
|
| 193 |
pm4125_l2: l2 { |
| 194 |
/* LPDDR4X VDD2 */ |
| 195 |
regulator-min-microvolt = <1136000>; |
| 196 |
regulator-max-microvolt = <1136000>; |
| 197 |
regulator-always-on; |
| 198 |
regulator-boot-on; |
| 199 |
}; |
| 200 |
|
| 201 |
pm4125_l3: l3 { |
| 202 |
/* LPDDR4X VDDQ */ |
| 203 |
regulator-min-microvolt = <616000>; |
| 204 |
regulator-max-microvolt = <616000>; |
| 205 |
regulator-always-on; |
| 206 |
regulator-boot-on; |
| 207 |
}; |
| 208 |
|
| 209 |
pm4125_l4: l4 { |
| 210 |
/* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */ |
| 211 |
regulator-min-microvolt = <1800000>; |
| 212 |
regulator-max-microvolt = <2700000>; |
| 213 |
regulator-allow-set-load; |
| 214 |
}; |
| 215 |
|
| 216 |
pm4125_l5: l5 { |
| 217 |
/* CSI/DSI */ |
| 218 |
regulator-min-microvolt = <1232000>; |
| 219 |
regulator-max-microvolt = <1232000>; |
| 220 |
regulator-allow-set-load; |
| 221 |
regulator-boot-on; |
| 222 |
}; |
| 223 |
|
| 224 |
pm4125_l6: l6 { |
| 225 |
/* DRAM PLL */ |
| 226 |
regulator-min-microvolt = <928000>; |
| 227 |
regulator-max-microvolt = <928000>; |
| 228 |
regulator-always-on; |
| 229 |
regulator-boot-on; |
| 230 |
}; |
| 231 |
|
| 232 |
pm4125_l7: l7 { |
| 233 |
/* Wi-Fi CX */ |
| 234 |
regulator-min-microvolt = <664000>; |
| 235 |
regulator-max-microvolt = <664000>; |
| 236 |
}; |
| 237 |
|
| 238 |
pm4125_l10: l10 { |
| 239 |
/* Wi-Fi RFA */ |
| 240 |
regulator-min-microvolt = <1304000>; |
| 241 |
regulator-max-microvolt = <1304000>; |
| 242 |
}; |
| 243 |
|
| 244 |
pm4125_l11: l11 { |
| 245 |
/* ANX7625 DVDD1P0V/AVDD1P0V */ |
| 246 |
regulator-min-microvolt = <1000000>; |
| 247 |
regulator-max-microvolt = <1000000>; |
| 248 |
regulator-boot-on; |
| 249 |
regulator-always-on; |
| 250 |
}; |
| 251 |
|
| 252 |
pm4125_l12: l12 { |
| 253 |
/* USB PHYs */ |
| 254 |
regulator-min-microvolt = <928000>; |
| 255 |
regulator-max-microvolt = <928000>; |
| 256 |
regulator-allow-set-load; |
| 257 |
regulator-boot-on; |
| 258 |
}; |
| 259 |
|
| 260 |
pm4125_l13: l13 { |
| 261 |
/* USB/QFPROM/PLLs */ |
| 262 |
regulator-min-microvolt = <1800000>; |
| 263 |
regulator-max-microvolt = <1800000>; |
| 264 |
regulator-allow-set-load; |
| 265 |
regulator-boot-on; |
| 266 |
}; |
| 267 |
|
| 268 |
pm4125_l14: l14 { |
| 269 |
/* SDHCI1 EMMC VCCQ */ |
| 270 |
regulator-min-microvolt = <1800000>; |
| 271 |
regulator-max-microvolt = <1800000>; |
| 272 |
regulator-allow-set-load; |
| 273 |
/* Broken hardware, never turn it off! */ |
| 274 |
regulator-always-on; |
| 275 |
}; |
| 276 |
|
| 277 |
pm4125_l15: l15 { |
| 278 |
/* VDDIO */ |
| 279 |
regulator-min-microvolt = <1800000>; |
| 280 |
regulator-max-microvolt = <1800000>; |
| 281 |
regulator-allow-set-load; |
| 282 |
regulator-always-on; |
| 283 |
regulator-boot-on; |
| 284 |
}; |
| 285 |
|
| 286 |
pm4125_l20: l20 { |
| 287 |
/* SDHCI1 EMMC */ |
| 288 |
regulator-min-microvolt = <2400000>; |
| 289 |
regulator-max-microvolt = <3600000>; |
| 290 |
regulator-allow-set-load; |
| 291 |
}; |
| 292 |
|
| 293 |
pm4125_l21: l21 { |
| 294 |
/* USB HS */ |
| 295 |
regulator-min-microvolt = <2960000>; |
| 296 |
regulator-max-microvolt = <3300000>; |
| 297 |
regulator-allow-set-load; |
| 298 |
regulator-boot-on; |
| 299 |
}; |
| 300 |
|
| 301 |
pm4125_l22: l22 { |
| 302 |
/* Wi-Fi VDD */ |
| 303 |
regulator-min-microvolt = <3312000>; |
| 304 |
regulator-max-microvolt = <3312000>; |
| 305 |
}; |
| 306 |
}; |
| 307 |
}; |
| 308 |
|
| 309 |
&sdhc_1 { |
| 310 |
vmmc-supply = <&pm4125_l20>; |
| 311 |
vqmmc-supply = <&pm4125_l14>; |
| 312 |
pinctrl-0 = <&sdc1_state_on>; |
| 313 |
pinctrl-1 = <&sdc1_state_off>; |
| 314 |
pinctrl-names = "default", "sleep"; |
| 315 |
mmc-hs400-1_8v; |
| 316 |
mmc-hs200-1_8v; |
| 317 |
non-removable; |
| 318 |
supports-cqe; |
| 319 |
no-sdio; |
| 320 |
no-sd; |
| 321 |
|
| 322 |
status = "okay"; |
| 323 |
}; |
| 324 |
|
| 325 |
&spi5 { |
| 326 |
status = "okay"; |
| 327 |
|
| 328 |
spidev@0 { |
| 329 |
reg = <0>; |
| 330 |
compatible = "arduino,unoq-mcu"; |
| 331 |
pinctrl-0 = <&spidev_cs>; |
| 332 |
pinctrl-names = "default"; |
| 333 |
}; |
| 334 |
}; |
| 335 |
|
| 336 |
&tlmm { |
| 337 |
spidev_cs: spidev-cs-state { |
| 338 |
pins = "gpio17"; |
| 339 |
function = "gpio"; |
| 340 |
drive-strength = <16>; |
| 341 |
}; |
| 342 |
|
| 343 |
jmisc_gpio18: jmisc-gpio18-state { |
| 344 |
pins = "gpio18"; |
| 345 |
function = "gpio"; |
| 346 |
drive-strength = <2>; |
| 347 |
bias-pull-down; |
| 348 |
}; |
| 349 |
|
| 350 |
jmisc_gpio28: jmisc-gpio28-state { |
| 351 |
pins = "gpio28"; |
| 352 |
function = "gpio"; |
| 353 |
drive-strength = <2>; |
| 354 |
bias-pull-down; |
| 355 |
}; |
| 356 |
|
| 357 |
key_vold_n: key-vold-n-state { |
| 358 |
pins = "gpio36"; |
| 359 |
function = "gpio"; |
| 360 |
bias-pull-up; |
| 361 |
output-disable; |
| 362 |
}; |
| 363 |
|
| 364 |
key_volp_n: key-volp-n-state { |
| 365 |
pins = "gpio96"; |
| 366 |
function = "gpio"; |
| 367 |
bias-pull-up; |
| 368 |
output-disable; |
| 369 |
}; |
| 370 |
|
| 371 |
jmisc_gpio98: jmisc-gpio98-state { |
| 372 |
pins = "gpio98"; |
| 373 |
function = "gpio"; |
| 374 |
drive-strength = <2>; |
| 375 |
bias-pull-down; |
| 376 |
}; |
| 377 |
|
| 378 |
jmisc_gpio99: jmisc-gpio99-state { |
| 379 |
pins = "gpio99"; |
| 380 |
function = "gpio"; |
| 381 |
drive-strength = <2>; |
| 382 |
bias-pull-down; |
| 383 |
}; |
| 384 |
|
| 385 |
jmisc_gpio100: jmisc-gpio100-state { |
| 386 |
pins = "gpio100"; |
| 387 |
function = "gpio"; |
| 388 |
drive-strength = <2>; |
| 389 |
bias-pull-down; |
| 390 |
}; |
| 391 |
|
| 392 |
jmisc_gpio101: jmisc-gpio101-state { |
| 393 |
pins = "gpio101"; |
| 394 |
function = "gpio"; |
| 395 |
drive-strength = <2>; |
| 396 |
bias-pull-down; |
| 397 |
}; |
| 398 |
}; |
| 399 |
|
| 400 |
&uart2 { |
| 401 |
status = "okay"; |
| 402 |
}; |
| 403 |
|
| 404 |
/* UART connected to Bluetooth */ |
| 405 |
&uart3 { |
| 406 |
status = "okay"; |
| 407 |
|
| 408 |
bluetooth { |
| 409 |
compatible = "qcom,wcn3988-bt"; |
| 410 |
|
| 411 |
vddio-supply = <&pm4125_l15>; |
| 412 |
vddxo-supply = <&pm4125_l13>; |
| 413 |
vddrf-supply = <&pm4125_l10>; |
| 414 |
vddch0-supply = <&pm4125_l22>; |
| 415 |
enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; |
| 416 |
max-speed = <3000000>; |
| 417 |
}; |
| 418 |
}; |
| 419 |
|
| 420 |
/* UART exposed in JCTL */ |
| 421 |
&uart4 { |
| 422 |
compatible = "qcom,geni-debug-uart"; |
| 423 |
|
| 424 |
status = "okay"; |
| 425 |
}; |
| 426 |
|
| 427 |
&usb { |
| 428 |
status = "okay"; |
| 429 |
}; |
| 430 |
|
| 431 |
&usb_hsphy { |
| 432 |
vdd-supply = <&pm4125_l12>; |
| 433 |
vdda-pll-supply = <&pm4125_l13>; |
| 434 |
vdda-phy-dpdm-supply = <&pm4125_l21>; |
| 435 |
|
| 436 |
status = "okay"; |
| 437 |
}; |
| 438 |
|
| 439 |
&usb_qmpphy { |
| 440 |
vdda-phy-supply = <&pm4125_l12>; |
| 441 |
vdda-pll-supply = <&pm4125_l13>; |
| 442 |
|
| 443 |
status = "okay"; |
| 444 |
}; |
| 445 |
|
| 446 |
&wifi { |
| 447 |
vdd-0.8-cx-mx-supply = <&pm4125_l7>; |
| 448 |
vdd-1.8-xo-supply = <&pm4125_l13>; |
| 449 |
vdd-1.3-rfa-supply = <&pm4125_l10>; |
| 450 |
vdd-3.3-ch0-supply = <&pm4125_l22>; |
| 451 |
qcom,ath10k-calibration-variant = "ArduinoImola"; |
| 452 |
firmware-name = "qcm2290"; |
| 453 |
|
| 454 |
status = "okay"; |
| 455 |
}; |
| 456 |
|
| 457 |
&xo_board { |
| 458 |
clock-frequency = <38400000>; |
| 459 |
}; |