| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include <dt-bindings/leds/common.h> |
| 9 |
#include "qcs8550-aim300.dtsi" |
| 10 |
#include "pm8010.dtsi" |
| 11 |
#include "pmr735d_a.dtsi" |
| 12 |
#include "pmr735d_b.dtsi" |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "Qualcomm Technologies, Inc. QCS8550 AIM300 AIOT"; |
| 16 |
compatible = "qcom,qcs8550-aim300-aiot", "qcom,qcs8550-aim300", "qcom,qcs8550", |
| 17 |
"qcom,sm8550"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
serial0 = &uart7; |
| 21 |
}; |
| 22 |
|
| 23 |
chosen { |
| 24 |
stdout-path = "serial0:115200n8"; |
| 25 |
}; |
| 26 |
|
| 27 |
gpio-keys { |
| 28 |
compatible = "gpio-keys"; |
| 29 |
|
| 30 |
pinctrl-0 = <&volume_up_n>; |
| 31 |
pinctrl-names = "default"; |
| 32 |
|
| 33 |
key-volume-up { |
| 34 |
label = "Volume Up"; |
| 35 |
debounce-interval = <15>; |
| 36 |
gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; |
| 37 |
linux,code = <KEY_VOLUMEUP>; |
| 38 |
linux,can-disable; |
| 39 |
wakeup-source; |
| 40 |
}; |
| 41 |
}; |
| 42 |
|
| 43 |
pmic-glink { |
| 44 |
compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; |
| 45 |
#address-cells = <1>; |
| 46 |
#size-cells = <0>; |
| 47 |
orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; |
| 48 |
|
| 49 |
connector@0 { |
| 50 |
compatible = "usb-c-connector"; |
| 51 |
reg = <0>; |
| 52 |
power-role = "dual"; |
| 53 |
data-role = "dual"; |
| 54 |
|
| 55 |
ports { |
| 56 |
#address-cells = <1>; |
| 57 |
#size-cells = <0>; |
| 58 |
|
| 59 |
port@0 { |
| 60 |
reg = <0>; |
| 61 |
|
| 62 |
pmic_glink_hs_in: endpoint { |
| 63 |
remote-endpoint = <&usb_1_dwc3_hs>; |
| 64 |
}; |
| 65 |
}; |
| 66 |
|
| 67 |
port@1 { |
| 68 |
reg = <1>; |
| 69 |
|
| 70 |
pmic_glink_ss_in: endpoint { |
| 71 |
remote-endpoint = <&redriver_ss_out>; |
| 72 |
}; |
| 73 |
}; |
| 74 |
|
| 75 |
port@2 { |
| 76 |
reg = <2>; |
| 77 |
|
| 78 |
pmic_glink_sbu: endpoint { |
| 79 |
remote-endpoint = <&fsa4480_sbu_mux>; |
| 80 |
}; |
| 81 |
}; |
| 82 |
}; |
| 83 |
}; |
| 84 |
}; |
| 85 |
|
| 86 |
vph_pwr: regulator-vph-pwr { |
| 87 |
compatible = "regulator-fixed"; |
| 88 |
regulator-name = "vph_pwr"; |
| 89 |
regulator-min-microvolt = <3700000>; |
| 90 |
regulator-max-microvolt = <3700000>; |
| 91 |
|
| 92 |
regulator-always-on; |
| 93 |
regulator-boot-on; |
| 94 |
}; |
| 95 |
}; |
| 96 |
|
| 97 |
&apps_rsc { |
| 98 |
regulators-0 { |
| 99 |
vdd-bob1-supply = <&vph_pwr>; |
| 100 |
vdd-bob2-supply = <&vph_pwr>; |
| 101 |
}; |
| 102 |
|
| 103 |
regulators-3 { |
| 104 |
vdd-s4-supply = <&vph_pwr>; |
| 105 |
vdd-s5-supply = <&vph_pwr>; |
| 106 |
}; |
| 107 |
|
| 108 |
regulators-4 { |
| 109 |
vdd-s4-supply = <&vph_pwr>; |
| 110 |
}; |
| 111 |
|
| 112 |
regulators-5 { |
| 113 |
vdd-s1-supply = <&vph_pwr>; |
| 114 |
vdd-s2-supply = <&vph_pwr>; |
| 115 |
vdd-s3-supply = <&vph_pwr>; |
| 116 |
vdd-s4-supply = <&vph_pwr>; |
| 117 |
vdd-s5-supply = <&vph_pwr>; |
| 118 |
vdd-s6-supply = <&vph_pwr>; |
| 119 |
}; |
| 120 |
}; |
| 121 |
|
| 122 |
&i2c_hub_2 { |
| 123 |
status = "okay"; |
| 124 |
|
| 125 |
typec-mux@42 { |
| 126 |
compatible = "fcs,fsa4480"; |
| 127 |
reg = <0x42>; |
| 128 |
|
| 129 |
vcc-supply = <&vreg_bob1>; |
| 130 |
|
| 131 |
mode-switch; |
| 132 |
orientation-switch; |
| 133 |
|
| 134 |
port { |
| 135 |
fsa4480_sbu_mux: endpoint { |
| 136 |
remote-endpoint = <&pmic_glink_sbu>; |
| 137 |
}; |
| 138 |
}; |
| 139 |
}; |
| 140 |
|
| 141 |
typec-retimer@1c { |
| 142 |
compatible = "onnn,nb7vpq904m"; |
| 143 |
reg = <0x1c>; |
| 144 |
|
| 145 |
vcc-supply = <&vreg_l15b_1p8>; |
| 146 |
|
| 147 |
orientation-switch; |
| 148 |
retimer-switch; |
| 149 |
|
| 150 |
ports { |
| 151 |
#address-cells = <1>; |
| 152 |
#size-cells = <0>; |
| 153 |
|
| 154 |
port@0 { |
| 155 |
reg = <0>; |
| 156 |
|
| 157 |
redriver_ss_out: endpoint { |
| 158 |
remote-endpoint = <&pmic_glink_ss_in>; |
| 159 |
}; |
| 160 |
}; |
| 161 |
|
| 162 |
port@1 { |
| 163 |
reg = <1>; |
| 164 |
|
| 165 |
redriver_ss_in: endpoint { |
| 166 |
data-lanes = <3 2 1 0>; |
| 167 |
remote-endpoint = <&usb_dp_qmpphy_out>; |
| 168 |
}; |
| 169 |
}; |
| 170 |
}; |
| 171 |
}; |
| 172 |
}; |
| 173 |
|
| 174 |
&mdss_dsi0 { |
| 175 |
status = "okay"; |
| 176 |
|
| 177 |
panel@0 { |
| 178 |
compatible = "visionox,vtdr6130"; |
| 179 |
reg = <0>; |
| 180 |
|
| 181 |
pinctrl-0 = <&dsi_active>, <&te_default>; |
| 182 |
pinctrl-1 = <&dsi_suspend>, <&te_default>; |
| 183 |
pinctrl-names = "default", "sleep"; |
| 184 |
|
| 185 |
reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; |
| 186 |
|
| 187 |
vci-supply = <&vreg_l13b_3p0>; |
| 188 |
vdd-supply = <&vreg_l11b_1p2>; |
| 189 |
vddio-supply = <&vreg_l12b_1p8>; |
| 190 |
|
| 191 |
port { |
| 192 |
panel0_in: endpoint { |
| 193 |
remote-endpoint = <&mdss_dsi0_out>; |
| 194 |
}; |
| 195 |
}; |
| 196 |
}; |
| 197 |
}; |
| 198 |
|
| 199 |
&mdss_dsi0_out { |
| 200 |
remote-endpoint = <&panel0_in>; |
| 201 |
data-lanes = <0 1 2 3>; |
| 202 |
}; |
| 203 |
|
| 204 |
&mdss_dsi0_phy { |
| 205 |
status = "okay"; |
| 206 |
}; |
| 207 |
|
| 208 |
&pcie0 { |
| 209 |
status = "okay"; |
| 210 |
}; |
| 211 |
|
| 212 |
&pcie0_phy { |
| 213 |
status = "okay"; |
| 214 |
}; |
| 215 |
|
| 216 |
&pcie1 { |
| 217 |
status = "okay"; |
| 218 |
}; |
| 219 |
|
| 220 |
&pcie1_phy { |
| 221 |
status = "okay"; |
| 222 |
}; |
| 223 |
|
| 224 |
&pm8550_gpios { |
| 225 |
volume_up_n: volume-up-n-state { |
| 226 |
pins = "gpio6"; |
| 227 |
function = "normal"; |
| 228 |
power-source = <1>; |
| 229 |
bias-pull-up; |
| 230 |
input-enable; |
| 231 |
}; |
| 232 |
}; |
| 233 |
|
| 234 |
&pon_pwrkey { |
| 235 |
status = "okay"; |
| 236 |
}; |
| 237 |
|
| 238 |
&pon_resin { |
| 239 |
linux,code = <KEY_VOLUMEDOWN>; |
| 240 |
|
| 241 |
status = "okay"; |
| 242 |
}; |
| 243 |
|
| 244 |
&qupv3_id_0 { |
| 245 |
status = "okay"; |
| 246 |
}; |
| 247 |
|
| 248 |
&remoteproc_adsp { |
| 249 |
firmware-name = "qcom/qcs8550/adsp.mbn", |
| 250 |
"qcom/qcs8550/adsp_dtb.mbn"; |
| 251 |
status = "okay"; |
| 252 |
}; |
| 253 |
|
| 254 |
&remoteproc_cdsp { |
| 255 |
firmware-name = "qcom/qcs8550/cdsp.mbn", |
| 256 |
"qcom/qcs8550/cdsp_dtb.mbn"; |
| 257 |
status = "okay"; |
| 258 |
}; |
| 259 |
|
| 260 |
&swr1 { |
| 261 |
status = "okay"; |
| 262 |
}; |
| 263 |
|
| 264 |
&swr2 { |
| 265 |
status = "okay"; |
| 266 |
}; |
| 267 |
|
| 268 |
&tlmm { |
| 269 |
gpio-reserved-ranges = <32 8>; |
| 270 |
|
| 271 |
dsi_active: dsi-active-state { |
| 272 |
pins = "gpio133"; |
| 273 |
function = "gpio"; |
| 274 |
drive-strength = <8>; |
| 275 |
bias-disable; |
| 276 |
}; |
| 277 |
|
| 278 |
dsi_suspend: dsi-suspend-state { |
| 279 |
pins = "gpio133"; |
| 280 |
function = "gpio"; |
| 281 |
drive-strength = <2>; |
| 282 |
bias-pull-down; |
| 283 |
}; |
| 284 |
|
| 285 |
te_default: te-default-state { |
| 286 |
pins = "gpio86"; |
| 287 |
function = "mdp_vsync"; |
| 288 |
drive-strength = <2>; |
| 289 |
bias-pull-down; |
| 290 |
}; |
| 291 |
}; |
| 292 |
|
| 293 |
&uart7 { |
| 294 |
status = "okay"; |
| 295 |
}; |
| 296 |
|
| 297 |
&usb_1 { |
| 298 |
status = "okay"; |
| 299 |
}; |
| 300 |
|
| 301 |
&usb_1_dwc3_hs { |
| 302 |
remote-endpoint = <&pmic_glink_hs_in>; |
| 303 |
}; |
| 304 |
|
| 305 |
&usb_1_hsphy { |
| 306 |
status = "okay"; |
| 307 |
}; |
| 308 |
|
| 309 |
&usb_dp_qmpphy { |
| 310 |
status = "okay"; |
| 311 |
}; |
| 312 |
|
| 313 |
&usb_dp_qmpphy_out { |
| 314 |
remote-endpoint = <&redriver_ss_in>; |
| 315 |
}; |