Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/qcs6490-rb3gen2.dts

raw
1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
4 */
5
6 /dts-v1/;
7
8 /* PM7250B is configured to use SID8/9 */
9 #define PM7250B_SID 8
10 #define PM7250B_SID1 9
11
12 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
13 #include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
14 #include <dt-bindings/leds/common.h>
15 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
16 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
17 #include "kodiak.dtsi"
18 #include "pm7250b.dtsi"
19 #include "pm7325.dtsi"
20 #include "pm8350c.dtsi"
21 #include "pmk8350.dtsi"
22 #include "qcs6490-audioreach.dtsi"
23
24 /delete-node/ &ipa_fw_mem;
25 /delete-node/ &rmtfs_mem;
26 /delete-node/ &adsp_mem;
27 /delete-node/ &cdsp_mem;
28 /delete-node/ &video_mem;
29 /delete-node/ &wlan_ce_mem;
30 /delete-node/ &wpss_mem;
31 /delete-node/ &xbl_mem;
32
33 / {
34 model = "Qualcomm Technologies, Inc. Robotics RB3gen2";
35 compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490";
36 chassis-type = "embedded";
37
38 aliases {
39 serial0 = &uart5;
40 serial1 = &uart7;
41 };
42
43 chosen {
44 stdout-path = "serial0:115200n8";
45 };
46
47 dp-connector {
48 compatible = "dp-connector";
49 label = "DP";
50 type = "mini";
51
52 hpd-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
53
54 port {
55 dp_connector_in: endpoint {
56 remote-endpoint = <&mdss_edp_out>;
57 };
58 };
59 };
60
61 hdmi-connector {
62 compatible = "hdmi-connector";
63 type = "a";
64
65 port {
66 hdmi_con: endpoint {
67 remote-endpoint = <&lt9611_out>;
68 };
69 };
70 };
71
72 lt9611_1v2: lt9611-vdd12-regulator {
73 compatible = "regulator-fixed";
74 regulator-name = "LT9611_1V2";
75
76 regulator-min-microvolt = <1200000>;
77 regulator-max-microvolt = <1200000>;
78 };
79
80 reserved-memory {
81 xbl_mem: xbl@80700000 {
82 reg = <0x0 0x80700000 0x0 0x100000>;
83 no-map;
84 };
85
86 cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
87 reg = <0x0 0x81800000 0x0 0x1e00000>;
88 no-map;
89 };
90
91 camera_mem: camera@84300000 {
92 reg = <0x0 0x84300000 0x0 0x500000>;
93 no-map;
94 };
95
96 wpss_mem: wpss@84800000 {
97 reg = <0x0 0x84800000 0x0 0x1900000>;
98 no-map;
99 };
100
101 adsp_mem: adsp@86100000 {
102 reg = <0x0 0x86100000 0x0 0x2800000>;
103 no-map;
104 };
105
106 cdsp_mem: cdsp@88900000 {
107 reg = <0x0 0x88900000 0x0 0x1e00000>;
108 no-map;
109 };
110
111 video_mem: video@8a700000 {
112 reg = <0x0 0x8a700000 0x0 0x700000>;
113 no-map;
114 };
115
116 cvp_mem: cvp@8ae00000 {
117 reg = <0x0 0x8ae00000 0x0 0x500000>;
118 no-map;
119 };
120
121 ipa_fw_mem: ipa-fw@8b300000 {
122 reg = <0x0 0x8b300000 0x0 0x10000>;
123 no-map;
124 };
125
126 ipa_gsi_mem: ipa-gsi@8b310000 {
127 reg = <0x0 0x8b310000 0x0 0xa000>;
128 no-map;
129 };
130
131 gpu_microcode_mem: gpu-microcode@8b31a000 {
132 reg = <0x0 0x8b31a000 0x0 0x2000>;
133 no-map;
134 };
135
136 tz_stat_mem: tz-stat@c0000000 {
137 reg = <0x0 0xc0000000 0x0 0x100000>;
138 no-map;
139 };
140
141 tags_mem: tags@c0100000 {
142 reg = <0x0 0xc0100000 0x0 0x1200000>;
143 no-map;
144 };
145
146 qtee_mem: qtee@c1300000 {
147 reg = <0x0 0xc1300000 0x0 0x500000>;
148 no-map;
149 };
150
151 trusted_apps_mem: trusted-apps@c1800000 {
152 reg = <0x0 0xc1800000 0x0 0x1c00000>;
153 no-map;
154 };
155
156 debug_vm_mem: debug-vm@d0600000 {
157 reg = <0x0 0xd0600000 0x0 0x100000>;
158 no-map;
159 };
160 };
161
162 gpio-keys {
163 compatible = "gpio-keys";
164
165 pinctrl-0 = <&kypd_vol_up_n>;
166 pinctrl-names = "default";
167
168 key-volume-up {
169 label = "Volume Up";
170 gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
171 linux,code = <KEY_VOLUMEUP>;
172 linux,can-disable;
173 };
174 };
175
176 pmic-glink {
177 compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
178
179 #address-cells = <1>;
180 #size-cells = <0>;
181 orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
182
183 connector@0 {
184 compatible = "usb-c-connector";
185 reg = <0>;
186 power-role = "dual";
187 data-role = "dual";
188
189 ports {
190 #address-cells = <1>;
191 #size-cells = <0>;
192
193 port@0 {
194 reg = <0>;
195
196 pmic_glink_hs_in: endpoint {
197 remote-endpoint = <&usb_1_dwc3_hs>;
198 };
199 };
200
201 port@1 {
202 reg = <1>;
203
204 pmic_glink_ss_in: endpoint {
205 remote-endpoint = <&redriver_usb_con_ss>;
206 };
207 };
208
209 port@2 {
210 reg = <2>;
211
212 pmic_glink_sbu_in: endpoint {
213 remote-endpoint = <&redriver_usb_con_sbu>;
214 };
215 };
216 };
217 };
218 };
219
220 vph_pwr: regulator-vph-pwr {
221 compatible = "regulator-fixed";
222 regulator-name = "vph_pwr";
223 regulator-min-microvolt = <3700000>;
224 regulator-max-microvolt = <3700000>;
225 };
226
227 thermal-zones {
228 sdm-skin-thermal {
229 thermal-sensors = <&pmk8350_adc_tm 3>;
230
231 trips {
232 active-config0 {
233 temperature = <125000>;
234 hysteresis = <1000>;
235 type = "passive";
236 };
237 };
238 };
239
240 quiet-thermal {
241 thermal-sensors = <&pmk8350_adc_tm 1>;
242
243 trips {
244 active-config0 {
245 temperature = <125000>;
246 hysteresis = <1000>;
247 type = "passive";
248 };
249 };
250 };
251
252 xo-thermal {
253 thermal-sensors = <&pmk8350_adc_tm 0>;
254
255 trips {
256 active-config0 {
257 temperature = <125000>;
258 hysteresis = <1000>;
259 type = "passive";
260 };
261 };
262 };
263 };
264
265 vdd_ntn_0p9: regulator-vdd-ntn-0p9 {
266 compatible = "regulator-fixed";
267 regulator-name = "VDD_NTN_0P9";
268 gpio = <&pm8350c_gpios 2 GPIO_ACTIVE_HIGH>;
269 regulator-min-microvolt = <899400>;
270 regulator-max-microvolt = <899400>;
271 enable-active-high;
272 pinctrl-0 = <&ntn_0p9_en>;
273 pinctrl-names = "default";
274 regulator-enable-ramp-delay = <4300>;
275 };
276
277 vdd_ntn_1p8: regulator-vdd-ntn-1p8 {
278 compatible = "regulator-fixed";
279 regulator-name = "VDD_NTN_1P8";
280 gpio = <&pm8350c_gpios 3 GPIO_ACTIVE_HIGH>;
281 regulator-min-microvolt = <1800000>;
282 regulator-max-microvolt = <1800000>;
283 enable-active-high;
284 pinctrl-0 = <&ntn_1p8_en>;
285 pinctrl-names = "default";
286 regulator-enable-ramp-delay = <10000>;
287 };
288
289 wcn6750-pmu {
290 compatible = "qcom,wcn6750-pmu";
291 pinctrl-0 = <&bt_en>;
292 pinctrl-names = "default";
293 vddaon-supply = <&vreg_s7b_0p972>;
294 vddasd-supply = <&vreg_l11c_2p8>;
295 vddpmu-supply = <&vreg_s7b_0p972>;
296 vddrfa0p8-supply = <&vreg_s7b_0p972>;
297 vddrfa1p2-supply = <&vreg_s8b_1p272>;
298 vddrfa1p7-supply = <&vreg_s1b_1p872>;
299 vddrfa2p2-supply = <&vreg_s1c_2p19>;
300
301 bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
302
303 regulators {
304 vreg_pmu_rfa_cmn: ldo0 {
305 regulator-name = "vreg_pmu_rfa_cmn";
306 };
307
308 vreg_pmu_aon_0p59: ldo1 {
309 regulator-name = "vreg_pmu_aon_0p59";
310 };
311
312 vreg_pmu_wlcx_0p8: ldo2 {
313 regulator-name = "vreg_pmu_wlcx_0p8";
314 };
315
316 vreg_pmu_wlmx_0p85: ldo3 {
317 regulator-name = "vreg_pmu_wlmx_0p85";
318 };
319
320 vreg_pmu_btcmx_0p85: ldo4 {
321 regulator-name = "vreg_pmu_btcmx_0p85";
322 };
323
324 vreg_pmu_rfa_0p8: ldo5 {
325 regulator-name = "vreg_pmu_rfa_0p8";
326 };
327
328 vreg_pmu_rfa_1p2: ldo6 {
329 regulator-name = "vreg_pmu_rfa_1p2";
330 };
331
332 vreg_pmu_rfa_1p7: ldo7 {
333 regulator-name = "vreg_pmu_rfa_1p7";
334 };
335
336 vreg_pmu_pcie_0p9: ldo8 {
337 regulator-name = "vreg_pmu_pcie_0p9";
338 };
339
340 vreg_pmu_pcie_1p8: ldo9 {
341 regulator-name = "vreg_pmu_pcie_1p8";
342 };
343 };
344 };
345 };
346
347 &apps_rsc {
348 regulators-0 {
349 compatible = "qcom,pm7325-rpmh-regulators";
350 qcom,pmic-id = "b";
351
352 vdd-s1-supply = <&vph_pwr>;
353 vdd-s2-supply = <&vph_pwr>;
354 vdd-s3-supply = <&vph_pwr>;
355 vdd-s4-supply = <&vph_pwr>;
356 vdd-s5-supply = <&vph_pwr>;
357 vdd-s6-supply = <&vph_pwr>;
358 vdd-s7-supply = <&vph_pwr>;
359 vdd-s8-supply = <&vph_pwr>;
360 vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
361 vdd-l2-l7-supply = <&vreg_bob_3p296>;
362 vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
363 vdd-l8-supply = <&vreg_s7b_0p972>;
364 vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
365 vdd-l13-supply = <&vreg_s7b_0p972>;
366 vdd-l14-l16-supply = <&vreg_s8b_1p272>;
367
368 vreg_s1b_1p872: smps1 {
369 regulator-name = "vreg_s1b_1p872";
370 regulator-min-microvolt = <1840000>;
371 regulator-max-microvolt = <2040000>;
372 };
373
374 vreg_s7b_0p972: smps7 {
375 regulator-name = "vreg_s7b_0p972";
376 regulator-min-microvolt = <535000>;
377 regulator-max-microvolt = <1120000>;
378 };
379
380 vreg_s8b_1p272: smps8 {
381 regulator-name = "vreg_s8b_1p272";
382 regulator-min-microvolt = <1200000>;
383 regulator-max-microvolt = <1500000>;
384 regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
385 };
386
387 vreg_l1b_0p912: ldo1 {
388 regulator-name = "vreg_l1b_0p912";
389 regulator-min-microvolt = <825000>;
390 regulator-max-microvolt = <925000>;
391 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
392 };
393
394 vreg_l2b_3p072: ldo2 {
395 regulator-name = "vreg_l2b_3p072";
396 regulator-min-microvolt = <2700000>;
397 regulator-max-microvolt = <3544000>;
398 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
399 };
400
401 vreg_l3b_0p504: ldo3 {
402 regulator-name = "vreg_l3b_0p504";
403 regulator-min-microvolt = <312000>;
404 regulator-max-microvolt = <650000>;
405 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
406 };
407
408 vreg_l6b_1p2: ldo6 {
409 regulator-name = "vreg_l6b_1p2";
410 regulator-min-microvolt = <1200000>;
411 regulator-max-microvolt = <1260000>;
412 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
413 };
414
415 vreg_l7b_2p952: ldo7 {
416 regulator-name = "vreg_l7b_2p952";
417 regulator-min-microvolt = <2952000>;
418 regulator-max-microvolt = <2952000>;
419 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
420 };
421
422 vreg_l8b_0p904: ldo8 {
423 regulator-name = "vreg_l8b_0p904";
424 regulator-min-microvolt = <870000>;
425 regulator-max-microvolt = <970000>;
426 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
427 };
428
429 vreg_l9b_1p2: ldo9 {
430 regulator-name = "vreg_l9b_1p2";
431 regulator-min-microvolt = <1200000>;
432 regulator-max-microvolt = <1200000>;
433 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
434 regulator-allow-set-load;
435 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
436 RPMH_REGULATOR_MODE_HPM>;
437 };
438
439 vreg_l11b_1p504: ldo11 {
440 regulator-name = "vreg_l11b_1p504";
441 regulator-min-microvolt = <1776000>;
442 regulator-max-microvolt = <2000000>;
443 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
444 };
445
446 vreg_l12b_0p751: ldo12 {
447 regulator-name = "vreg_l12b_0p751";
448 regulator-min-microvolt = <751000>;
449 regulator-max-microvolt = <824000>;
450 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
451 };
452
453 vreg_l13b_0p53: ldo13 {
454 regulator-name = "vreg_l13b_0p53";
455 regulator-min-microvolt = <530000>;
456 regulator-max-microvolt = <824000>;
457 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
458 };
459
460 vreg_l14b_1p08: ldo14 {
461 regulator-name = "vreg_l14b_1p08";
462 regulator-min-microvolt = <1200000>;
463 regulator-max-microvolt = <1304000>;
464 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
465 };
466
467 vreg_l15b_0p765: ldo15 {
468 regulator-name = "vreg_l15b_0p765";
469 regulator-min-microvolt = <765000>;
470 regulator-max-microvolt = <1020000>;
471 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
472 };
473
474 vreg_l16b_1p1: ldo16 {
475 regulator-name = "vreg_l16b_1p1";
476 regulator-min-microvolt = <1100000>;
477 regulator-max-microvolt = <1300000>;
478 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
479 };
480
481 vreg_l17b_1p7: ldo17 {
482 regulator-name = "vreg_l17b_1p7";
483 regulator-min-microvolt = <1700000>;
484 regulator-max-microvolt = <1900000>;
485 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
486 };
487
488 vreg_l18b_1p8: ldo18 {
489 regulator-name = "vreg_l18b_1p8";
490 regulator-min-microvolt = <1800000>;
491 regulator-max-microvolt = <2000000>;
492 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
493 };
494
495 vreg_l19b_1p8: ldo19 {
496 regulator-name = "vreg_l19b_1p8";
497 regulator-min-microvolt = <1800000>;
498 regulator-max-microvolt = <2000000>;
499 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
500 };
501 };
502
503 regulators-1 {
504 compatible = "qcom,pm8350c-rpmh-regulators";
505 qcom,pmic-id = "c";
506
507 vdd-s1-supply = <&vph_pwr>;
508 vdd-s2-supply = <&vph_pwr>;
509 vdd-s3-supply = <&vph_pwr>;
510 vdd-s4-supply = <&vph_pwr>;
511 vdd-s5-supply = <&vph_pwr>;
512 vdd-s6-supply = <&vph_pwr>;
513 vdd-s7-supply = <&vph_pwr>;
514 vdd-s8-supply = <&vph_pwr>;
515 vdd-s9-supply = <&vph_pwr>;
516 vdd-s10-supply = <&vph_pwr>;
517 vdd-l1-l12-supply = <&vreg_s1b_1p872>;
518 vdd-l2-l8-supply = <&vreg_s1b_1p872>;
519 vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
520 vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
521 vdd-l10-supply = <&vreg_s7b_0p972>;
522 vdd-bob-supply = <&vph_pwr>;
523
524 vreg_s1c_2p19: smps1 {
525 regulator-name = "vreg_s1c_2p19";
526 regulator-min-microvolt = <2200000>;
527 regulator-max-microvolt = <2208000>;
528 };
529
530 vreg_s9c_1p084: smps9 {
531 regulator-name = "vreg_s9c_1p084";
532 regulator-min-microvolt = <1010000>;
533 regulator-max-microvolt = <1170000>;
534 };
535
536 vreg_l1c_1p8: ldo1 {
537 regulator-name = "vreg_l1c_1p8";
538 regulator-min-microvolt = <1800000>;
539 regulator-max-microvolt = <1980000>;
540 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
541 };
542
543 vreg_l2c_1p62: ldo2 {
544 regulator-name = "vreg_l2c_1p62";
545 regulator-min-microvolt = <1620000>;
546 regulator-max-microvolt = <1980000>;
547 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
548 };
549
550 vreg_l3c_2p8: ldo3 {
551 regulator-name = "vreg_l3c_2p8";
552 regulator-min-microvolt = <2800000>;
553 regulator-max-microvolt = <3540000>;
554 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
555 };
556
557 vreg_l4c_1p62: ldo4 {
558 regulator-name = "vreg_l4c_1p62";
559 regulator-min-microvolt = <1620000>;
560 regulator-max-microvolt = <3300000>;
561 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
562 };
563
564 vreg_l5c_1p62: ldo5 {
565 regulator-name = "vreg_l5c_1p62";
566 regulator-min-microvolt = <1620000>;
567 regulator-max-microvolt = <3300000>;
568 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
569 };
570
571 vreg_l6c_2p96: ldo6 {
572 regulator-name = "vreg_l6c_2p96";
573 regulator-min-microvolt = <1650000>;
574 regulator-max-microvolt = <3544000>;
575 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
576 };
577
578 vreg_l7c_3p0: ldo7 {
579 regulator-name = "vreg_l7c_3p0";
580 regulator-min-microvolt = <3000000>;
581 regulator-max-microvolt = <3544000>;
582 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
583 };
584
585 vreg_l8c_1p62: ldo8 {
586 regulator-name = "vreg_l8c_1p62";
587 regulator-min-microvolt = <1800000>;
588 regulator-max-microvolt = <2000000>;
589 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
590 };
591
592 vreg_l9c_2p96: ldo9 {
593 regulator-name = "vreg_l9c_2p96";
594 regulator-min-microvolt = <2700000>;
595 regulator-max-microvolt = <3544000>;
596 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
597 };
598
599 vreg_l10c_0p88: ldo10 {
600 regulator-name = "vreg_l10c_0p88";
601 regulator-min-microvolt = <720000>;
602 regulator-max-microvolt = <1050000>;
603 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
604 };
605
606 vreg_l11c_2p8: ldo11 {
607 regulator-name = "vreg_l11c_2p8";
608 regulator-min-microvolt = <2800000>;
609 regulator-max-microvolt = <3544000>;
610 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
611 };
612
613 vreg_l12c_1p65: ldo12 {
614 regulator-name = "vreg_l12c_1p65";
615 regulator-min-microvolt = <1800000>;
616 regulator-max-microvolt = <2000000>;
617 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
618 };
619
620 vreg_l13c_2p7: ldo13 {
621 regulator-name = "vreg_l13c_2p7";
622 regulator-min-microvolt = <2700000>;
623 regulator-max-microvolt = <3544000>;
624 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
625 };
626
627 vreg_bob_3p296: bob {
628 regulator-name = "vreg_bob_3p296";
629 regulator-min-microvolt = <3008000>;
630 regulator-max-microvolt = <3960000>;
631 };
632 };
633 };
634
635 &gcc {
636 protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
637 <GCC_MSS_CFG_AHB_CLK>,
638 <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
639 <GCC_MSS_OFFLINE_AXI_CLK>,
640 <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
641 <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
642 <GCC_MSS_SNOC_AXI_CLK>,
643 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
644 <GCC_QSPI_CORE_CLK>,
645 <GCC_QSPI_CORE_CLK_SRC>,
646 <GCC_SEC_CTRL_CLK_SRC>,
647 <GCC_WPSS_AHB_BDG_MST_CLK>,
648 <GCC_WPSS_AHB_CLK>,
649 <GCC_WPSS_RSCP_CLK>;
650 };
651
652 &gpi_dma0 {
653 status = "okay";
654 };
655
656 &gpi_dma1 {
657 status = "okay";
658 };
659
660 &gpu {
661 status = "okay";
662 };
663
664 &gpu_zap_shader {
665 firmware-name = "qcom/qcs6490/a660_zap.mbn";
666 };
667
668 &i2c0 {
669 clock-frequency = <400000>;
670 status = "okay";
671
672 lt9611_codec: hdmi-bridge@2b {
673 compatible = "lontium,lt9611uxc";
674 reg = <0x2b>;
675
676 interrupts-extended = <&tlmm 24 IRQ_TYPE_EDGE_FALLING>;
677 reset-gpios = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>;
678
679 vdd-supply = <&lt9611_1v2>;
680 vcc-supply = <&vreg_l11c_2p8>;
681
682 pinctrl-names = "default";
683 pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
684
685 ports {
686 #address-cells = <1>;
687 #size-cells = <0>;
688
689 port@0 {
690 reg = <0>;
691
692 lt9611_a: endpoint {
693 remote-endpoint = <&mdss_dsi0_out>;
694 };
695 };
696
697 port@2 {
698 reg = <2>;
699
700 lt9611_out: endpoint {
701 remote-endpoint = <&hdmi_con>;
702 };
703 };
704 };
705 };
706 };
707
708 &i2c1 {
709 clock-frequency = <100000>;
710 status = "okay";
711
712 typec-mux@1c {
713 compatible = "onnn,nb7vpq904m";
714 reg = <0x1c>;
715
716 vcc-supply = <&vreg_l18b_1p8>;
717
718 retimer-switch;
719 orientation-switch;
720
721 ports {
722 #address-cells = <1>;
723 #size-cells = <0>;
724
725 port@0 {
726 reg = <0>;
727
728 redriver_usb_con_ss: endpoint {
729 remote-endpoint = <&pmic_glink_ss_in>;
730 };
731 };
732
733 port@1 {
734 reg = <1>;
735
736 redriver_phy_con_ss: endpoint {
737 remote-endpoint = <&usb_dp_qmpphy_out>;
738 data-lanes = <0 1 2 3>;
739 };
740 };
741
742 port@2 {
743 reg = <2>;
744
745 redriver_usb_con_sbu: endpoint {
746 remote-endpoint = <&pmic_glink_sbu_in>;
747 };
748 };
749 };
750 };
751 };
752
753 &lpass_va_macro {
754 status = "okay";
755 };
756
757 &lpass_wsa_macro {
758 status = "okay";
759 };
760
761 &mdss {
762 status = "okay";
763 };
764
765 &mdss_dp {
766 status = "okay";
767 };
768
769 &mdss_dp_out {
770 data-lanes = <0 1>;
771 remote-endpoint = <&usb_dp_qmpphy_dp_in>;
772 };
773
774 &mdss_dsi {
775 vdda-supply = <&vreg_l6b_1p2>;
776 status = "okay";
777 };
778
779 &mdss_dsi0_out {
780 remote-endpoint = <&lt9611_a>;
781 data-lanes = <0 1 2 3>;
782 };
783
784 &mdss_dsi_phy {
785 vdds-supply = <&vreg_l10c_0p88>;
786 status = "okay";
787 };
788
789 &mdss_edp {
790 status = "okay";
791 };
792
793 &mdss_edp_out {
794 data-lanes = <0 1 2 3>;
795 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
796
797 remote-endpoint = <&dp_connector_in>;
798 };
799
800 &mdss_edp_phy {
801 status = "okay";
802 };
803
804 &pcie1 {
805 perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
806
807 pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>, <&pcie1_clkreq_n>;
808 pinctrl-names = "default";
809
810 iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
811 <0x100 &apps_smmu 0x1c81 0x1>,
812 <0x208 &apps_smmu 0x1c84 0x1>,
813 <0x210 &apps_smmu 0x1c85 0x1>,
814 <0x218 &apps_smmu 0x1c86 0x1>,
815 <0x300 &apps_smmu 0x1c87 0x1>,
816 <0x400 &apps_smmu 0x1c88 0x1>,
817 <0x500 &apps_smmu 0x1c89 0x1>,
818 <0x501 &apps_smmu 0x1c90 0x1>;
819
820 status = "okay";
821 };
822
823 &pcie1_phy {
824 vdda-phy-supply = <&vreg_l10c_0p88>;
825 vdda-pll-supply = <&vreg_l6b_1p2>;
826
827 status = "okay";
828 };
829
830 &pcie1_port0 {
831 pcie@0,0 {
832 compatible = "pci1179,0623";
833 reg = <0x10000 0x0 0x0 0x0 0x0>;
834 #address-cells = <3>;
835 #size-cells = <2>;
836
837 device_type = "pci";
838 ranges;
839 bus-range = <0x2 0xff>;
840
841 vddc-supply = <&vdd_ntn_0p9>;
842 vdd18-supply = <&vdd_ntn_1p8>;
843 vdd09-supply = <&vdd_ntn_0p9>;
844 vddio1-supply = <&vdd_ntn_1p8>;
845 vddio2-supply = <&vdd_ntn_1p8>;
846 vddio18-supply = <&vdd_ntn_1p8>;
847
848 i2c-parent = <&i2c0 0x77>;
849
850 resx-gpios = <&pm8350c_gpios 1 GPIO_ACTIVE_LOW>;
851
852 pinctrl-0 = <&tc9563_resx_n>;
853 pinctrl-names = "default";
854
855 pcie@1,0 {
856 reg = <0x20800 0x0 0x0 0x0 0x0>;
857 #address-cells = <3>;
858 #size-cells = <2>;
859
860 device_type = "pci";
861 ranges;
862 bus-range = <0x3 0xff>;
863 };
864
865 pcie@2,0 {
866 reg = <0x21000 0x0 0x0 0x0 0x0>;
867 #address-cells = <3>;
868 #size-cells = <2>;
869
870 device_type = "pci";
871 ranges;
872 bus-range = <0x4 0xff>;
873 };
874
875 pcie@3,0 {
876 reg = <0x21800 0x0 0x0 0x0 0x0>;
877 #address-cells = <3>;
878 #size-cells = <2>;
879 device_type = "pci";
880 ranges;
881 bus-range = <0x5 0xff>;
882
883 pci@0,0 {
884 reg = <0x50000 0x0 0x0 0x0 0x0>;
885 #address-cells = <3>;
886 #size-cells = <2>;
887 device_type = "pci";
888 ranges;
889 };
890
891 pci@0,1 {
892 reg = <0x50100 0x0 0x0 0x0 0x0>;
893 #address-cells = <3>;
894 #size-cells = <2>;
895 device_type = "pci";
896 ranges;
897 };
898 };
899 };
900 };
901
902 &pm7325_gpios {
903 kypd_vol_up_n: kypd-vol-up-n-state {
904 pins = "gpio6";
905 function = PMIC_GPIO_FUNC_NORMAL;
906 power-source = <1>;
907 bias-pull-up;
908 input-enable;
909 };
910 };
911
912 &pm7325_temp_alarm {
913 io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>;
914 io-channel-names = "thermal";
915 };
916
917 &pmk8350_adc_tm {
918 status = "okay";
919
920 xo-therm@0 {
921 reg = <0>;
922 io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
923 qcom,ratiometric;
924 qcom,hw-settle-time-us = <200>;
925 };
926
927 quiet-therm@1 {
928 reg = <1>;
929 io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
930 qcom,ratiometric;
931 qcom,hw-settle-time-us = <200>;
932 };
933
934 sdm-skin-therm@3 {
935 reg = <3>;
936 io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
937 qcom,ratiometric;
938 qcom,hw-settle-time-us = <200>;
939 };
940 };
941
942 &pm8350c_pwm {
943 nvmem = <&pmk8350_sdam_21>,
944 <&pmk8350_sdam_22>;
945 nvmem-names = "lpg_chan_sdam",
946 "lut_sdam";
947
948 #address-cells = <1>;
949 #size-cells = <0>;
950
951 status = "okay";
952
953 led@1 {
954 reg = <1>;
955 color = <LED_COLOR_ID_GREEN>;
956 function = LED_FUNCTION_INDICATOR;
957 function-enumerator = <3>;
958 linux,default-trigger = "none";
959 default-state = "off";
960 panic-indicator;
961 };
962
963 led@2 {
964 reg = <2>;
965 color = <LED_COLOR_ID_GREEN>;
966 function = LED_FUNCTION_INDICATOR;
967 function-enumerator = <2>;
968 linux,default-trigger = "none";
969 default-state = "off";
970 };
971
972 led@3 {
973 reg = <3>;
974 color = <LED_COLOR_ID_GREEN>;
975 function = LED_FUNCTION_INDICATOR;
976 function-enumerator = <1>;
977 linux,default-trigger = "none";
978 default-state = "off";
979 };
980 };
981
982 &pmk8350_rtc {
983 status = "okay";
984 };
985
986 &pmk8350_vadc {
987 channel@3 {
988 reg = <PMK8350_ADC7_DIE_TEMP>;
989 label = "pmk8350_die_temp";
990 qcom,pre-scaling = <1 1>;
991 };
992
993 channel@44 {
994 reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
995 label = "xo_therm";
996 qcom,hw-settle-time = <200>;
997 qcom,pre-scaling = <1 1>;
998 qcom,ratiometric;
999 };
1000
1001 channel@103 {
1002 reg = <PM7325_ADC7_DIE_TEMP>;
1003 label = "pm7325_die_temp";
1004 qcom,pre-scaling = <1 1>;
1005 };
1006
1007 channel@144 {
1008 reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
1009 qcom,ratiometric;
1010 qcom,hw-settle-time = <200>;
1011 qcom,pre-scaling = <1 1>;
1012 label = "pm7325_quiet_therm";
1013 };
1014
1015 channel@146 {
1016 reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
1017 qcom,ratiometric;
1018 qcom,hw-settle-time = <200>;
1019 qcom,pre-scaling = <1 1>;
1020 label = "pm7325_sdm_skin_therm";
1021 };
1022 };
1023
1024 &pon_pwrkey {
1025 status = "okay";
1026 };
1027
1028 &pon_resin {
1029 linux,code = <KEY_VOLUMEDOWN>;
1030
1031 status = "okay";
1032 };
1033
1034 &qup_uart7_cts {
1035 /*
1036 * Configure a bias-bus-hold on CTS to lower power
1037 * usage when Bluetooth is turned off. Bus hold will
1038 * maintain a low power state regardless of whether
1039 * the Bluetooth module drives the pin in either
1040 * direction or leaves the pin fully unpowered.
1041 */
1042 bias-bus-hold;
1043 };
1044
1045 &qup_uart7_rts {
1046 /* We'll drive RTS, so no pull */
1047 drive-strength = <2>;
1048 bias-disable;
1049 };
1050
1051 &qup_uart7_rx {
1052 /*
1053 * Configure a pull-up on RX. This is needed to avoid
1054 * garbage data when the TX pin of the Bluetooth module is
1055 * in tri-state (module powered off or not driving the
1056 * signal yet).
1057 */
1058 bias-pull-up;
1059 };
1060
1061 &qup_uart7_tx {
1062 /* We'll drive TX, so no pull */
1063 drive-strength = <2>;
1064 bias-disable;
1065 };
1066
1067 &qupv3_id_0 {
1068 firmware-name = "qcom/qcs6490/qupv3fw.elf";
1069 status = "okay";
1070 };
1071
1072 &qupv3_id_1 {
1073 firmware-name = "qcom/qcs6490/qupv3fw.elf";
1074 status = "okay";
1075 };
1076
1077 &remoteproc_adsp {
1078 firmware-name = "qcom/qcs6490/adsp.mbn";
1079 status = "okay";
1080 };
1081
1082 &remoteproc_cdsp {
1083 firmware-name = "qcom/qcs6490/cdsp.mbn";
1084 status = "okay";
1085 };
1086
1087 &remoteproc_mpss {
1088 firmware-name = "qcom/qcs6490/modem.mbn";
1089 status = "okay";
1090 };
1091
1092 &remoteproc_wpss {
1093 firmware-name = "qcom/qcs6490/wpss.mbn";
1094 status = "okay";
1095 };
1096
1097 &sdhc_2 {
1098 pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
1099 pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
1100
1101 vmmc-supply = <&vreg_l9c_2p96>;
1102 vqmmc-supply = <&vreg_l6c_2p96>;
1103
1104 cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
1105
1106 status = "okay";
1107 };
1108
1109 &sound {
1110 compatible = "qcom,qcs6490-rb3gen2-sndcard";
1111 model = "QCS6490-RB3Gen2";
1112
1113 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
1114 "SpkrRight IN", "WSA_SPK2 OUT",
1115 "VA DMIC0", "vdd-micb",
1116 "VA DMIC1", "vdd-micb",
1117 "VA DMIC2", "vdd-micb",
1118 "VA DMIC3", "vdd-micb";
1119
1120 wsa-dai-link {
1121 link-name = "WSA Playback";
1122
1123 codec {
1124 sound-dai = <&left_spkr>, <&right_spkr>,
1125 <&swr2 0>, <&lpass_wsa_macro 0>;
1126 };
1127
1128 cpu {
1129 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
1130 };
1131
1132 platform {
1133 sound-dai = <&q6apm>;
1134 };
1135 };
1136
1137 va-dai-link {
1138 link-name = "VA Capture";
1139
1140 codec {
1141 sound-dai = <&lpass_va_macro 0>;
1142 };
1143
1144 cpu {
1145 sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
1146 };
1147
1148 platform {
1149 sound-dai = <&q6apm>;
1150 };
1151 };
1152 };
1153
1154 &swr2 {
1155 status = "okay";
1156
1157 left_spkr: speaker@0,1 {
1158 compatible = "sdw10217020200";
1159 reg = <0 1>;
1160 reset-gpios = <&tlmm 158 GPIO_ACTIVE_LOW>;
1161 #sound-dai-cells = <0>;
1162 sound-name-prefix = "SpkrLeft";
1163 #thermal-sensor-cells = <0>;
1164 vdd-supply = <&vreg_l18b_1p8>;
1165 qcom,port-mapping = <1 2 3 7>;
1166 };
1167
1168 right_spkr: speaker@0,2 {
1169 compatible = "sdw10217020200";
1170 reg = <0 2>;
1171 reset-gpios = <&tlmm 158 GPIO_ACTIVE_LOW>;
1172 #sound-dai-cells = <0>;
1173 sound-name-prefix = "SpkrRight";
1174 #thermal-sensor-cells = <0>;
1175 vdd-supply = <&vreg_l18b_1p8>;
1176 qcom,port-mapping = <4 5 6 8>;
1177 };
1178 };
1179
1180 &pm8350c_gpios {
1181 ntn_0p9_en: ntn-0p9-en-state {
1182 pins = "gpio2";
1183 function = "normal";
1184
1185 bias-disable;
1186 input-disable;
1187 output-enable;
1188 power-source = <0>;
1189 };
1190
1191 ntn_1p8_en: ntn-1p8-en-state {
1192 pins = "gpio3";
1193 function = "normal";
1194
1195 bias-disable;
1196 input-disable;
1197 output-enable;
1198 power-source = <0>;
1199 };
1200
1201 tc9563_resx_n: tc9563-resx-state {
1202 pins = "gpio1";
1203 function = "normal";
1204
1205 bias-disable;
1206 input-disable;
1207 output-enable;
1208 power-source = <0>;
1209 };
1210 };
1211
1212 &tlmm {
1213 gpio-reserved-ranges = <32 2>, /* ADSP */
1214 <48 4>; /* NFC */
1215
1216 bt_en: bt-en-state {
1217 pins = "gpio85";
1218 function = "gpio";
1219 output-low;
1220 bias-disable;
1221 };
1222
1223 qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
1224 pins = "gpio28";
1225 function = "gpio";
1226 /*
1227 * Configure a bias-bus-hold on CTS to lower power
1228 * usage when Bluetooth is turned off. Bus hold will
1229 * maintain a low power state regardless of whether
1230 * the Bluetooth module drives the pin in either
1231 * direction or leaves the pin fully unpowered.
1232 */
1233 bias-bus-hold;
1234 };
1235
1236 qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
1237 pins = "gpio29";
1238 function = "gpio";
1239 /*
1240 * Configure pull-down on RTS. As RTS is active low
1241 * signal, pull it low to indicate the BT SoC that it
1242 * can wakeup the system anytime from suspend state by
1243 * pulling RX low (by sending wakeup bytes).
1244 */
1245 bias-pull-down;
1246 };
1247
1248 qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
1249 pins = "gpio31";
1250 function = "gpio";
1251 /*
1252 * Configure a pull-up on RX. This is needed to avoid
1253 * garbage data when the TX pin of the Bluetooth module
1254 * is floating which may cause spurious wakeups.
1255 */
1256 bias-pull-up;
1257 };
1258
1259 qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
1260 pins = "gpio30";
1261 function = "gpio";
1262 /*
1263 * Configure pull-up on TX when it isn't actively driven
1264 * to prevent BT SoC from receiving garbage during sleep.
1265 */
1266 bias-pull-up;
1267 };
1268 };
1269
1270 &uart5 {
1271 status = "okay";
1272 };
1273
1274 &uart7 {
1275 /delete-property/ interrupts;
1276 interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
1277 <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
1278 pinctrl-1 = <&qup_uart7_sleep_cts>,
1279 <&qup_uart7_sleep_rts>,
1280 <&qup_uart7_sleep_tx>,
1281 <&qup_uart7_sleep_rx>;
1282 pinctrl-names = "default",
1283 "sleep";
1284
1285 status = "okay";
1286
1287 bluetooth: bluetooth {
1288 compatible = "qcom,wcn6750-bt";
1289 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
1290 vddaon-supply = <&vreg_pmu_aon_0p59>;
1291 vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
1292 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
1293 vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
1294 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
1295 max-speed = <3200000>;
1296 };
1297 };
1298
1299 &usb_1 {
1300 dr_mode = "otg";
1301 usb-role-switch;
1302
1303 status = "okay";
1304 };
1305
1306 &usb_1_dwc3_hs {
1307 remote-endpoint = <&pmic_glink_hs_in>;
1308 };
1309
1310 &usb_1_dwc3_ss {
1311 remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
1312 };
1313
1314 &usb_1_hsphy {
1315 vdda-pll-supply = <&vreg_l10c_0p88>;
1316 vdda33-supply = <&vreg_l2b_3p072>;
1317 vdda18-supply = <&vreg_l1c_1p8>;
1318
1319 status = "okay";
1320 };
1321
1322 &usb_1_qmpphy {
1323 vdda-phy-supply = <&vreg_l6b_1p2>;
1324 vdda-pll-supply = <&vreg_l1b_0p912>;
1325
1326 orientation-switch;
1327
1328 status = "okay";
1329 };
1330
1331 &usb_dp_qmpphy_out {
1332 remote-endpoint = <&redriver_phy_con_ss>;
1333 };
1334
1335 &usb_dp_qmpphy_usb_ss_in {
1336 remote-endpoint = <&usb_1_dwc3_ss>;
1337 };
1338
1339 &usb_dp_qmpphy_dp_in {
1340 remote-endpoint = <&mdss_dp_out>;
1341 };
1342
1343 &ufs_mem_hc {
1344 reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
1345 vcc-supply = <&vreg_l7b_2p952>;
1346 vcc-max-microamp = <800000>;
1347 vccq-supply = <&vreg_l9b_1p2>;
1348 vccq-max-microamp = <900000>;
1349 vccq2-supply = <&vreg_l9b_1p2>;
1350 vccq2-max-microamp = <900000>;
1351
1352 status = "okay";
1353 };
1354
1355 &ufs_mem_phy {
1356 vdda-phy-supply = <&vreg_l10c_0p88>;
1357 vdda-pll-supply = <&vreg_l6b_1p2>;
1358
1359 status = "okay";
1360 };
1361
1362 &venus {
1363 status = "okay";
1364 };
1365
1366 &wifi {
1367 memory-region = <&wlan_fw_mem>;
1368 qcom,calibration-variant = "Qualcomm_rb3gen2";
1369
1370 status = "okay";
1371 };
1372
1373 /* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
1374
1375 &edp_hot_plug_det {
1376 function = "gpio";
1377 bias-disable;
1378 };
1379
1380 &pm7250b_gpios {
1381 lt9611_rst_pin: lt9611-rst-state {
1382 pins = "gpio2";
1383 function = "normal";
1384
1385 output-high;
1386 input-disable;
1387 power-source = <0>;
1388 };
1389 };
1390
1391 &sdc2_clk {
1392 bias-disable;
1393 drive-strength = <16>;
1394 };
1395
1396 &sdc2_cmd {
1397 bias-pull-up;
1398 drive-strength = <10>;
1399 };
1400
1401 &sdc2_data {
1402 bias-pull-up;
1403 drive-strength = <10>;
1404 };
1405
1406 &tlmm {
1407 lt9611_irq_pin: lt9611-irq-state {
1408 pins = "gpio24";
1409 function = "gpio";
1410 drive-strength = <2>;
1411 bias-disable;
1412 };
1413
1414 pcie1_reset_n: pcie1-reset-n-state {
1415 pins = "gpio2";
1416 function = "gpio";
1417 drive-strength = <16>;
1418 output-low;
1419 bias-disable;
1420 };
1421
1422 pcie1_wake_n: pcie1-wake-n-state {
1423 pins = "gpio3";
1424 function = "gpio";
1425 drive-strength = <2>;
1426 bias-pull-up;
1427 };
1428
1429 sd_cd: sd-cd-state {
1430 pins = "gpio91";
1431 function = "gpio";
1432 bias-pull-up;
1433 };
1434 };
1435
1436 &lpass_audiocc {
1437 compatible = "qcom,qcm6490-lpassaudiocc";
1438 /delete-property/ power-domains;
1439 };