Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/qcs6490-radxa-dragon-q6a.dts

raw
1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2025 Radxa Computer (Shenzhen) Co., Ltd.
4 */
5
6 /dts-v1/;
7
8 /* PM7250B is configured to use SID8/9 */
9 #define PM7250B_SID 8
10 #define PM7250B_SID1 9
11
12 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
13 #include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
14 #include <dt-bindings/leds/common.h>
15 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
16 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
17 #include "kodiak.dtsi"
18 #include "pm7250b.dtsi"
19 #include "pm7325.dtsi"
20 #include "pm8350c.dtsi" /* PM7350C */
21 #include "pmk8350.dtsi" /* PMK7325 */
22 #include "qcs6490-audioreach.dtsi"
23
24 /delete-node/ &adsp_mem;
25 /delete-node/ &cdsp_mem;
26 /delete-node/ &ipa_fw_mem;
27 /delete-node/ &mpss_mem;
28 /delete-node/ &remoteproc_mpss;
29 /delete-node/ &remoteproc_wpss;
30 /delete-node/ &rmtfs_mem;
31 /delete-node/ &video_mem;
32 /delete-node/ &wifi;
33 /delete-node/ &wlan_ce_mem;
34 /delete-node/ &wlan_fw_mem;
35 /delete-node/ &wpss_mem;
36 /delete-node/ &xbl_mem;
37
38 / {
39 model = "Radxa Dragon Q6A";
40 compatible = "radxa,dragon-q6a", "qcom,qcm6490";
41 chassis-type = "embedded";
42
43 aliases {
44 mmc0 = &sdhc_1;
45 mmc1 = &sdhc_2;
46 serial0 = &uart5;
47 };
48
49 wcd938x: audio-codec {
50 compatible = "qcom,wcd9380-codec";
51
52 pinctrl-0 = <&wcd_default>;
53 pinctrl-names = "default";
54
55 reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
56
57 vdd-rxtx-supply = <&vreg_l18b_1p8>;
58 vdd-io-supply = <&vreg_l18b_1p8>;
59 vdd-buck-supply = <&vreg_l17b_1p8>;
60 vdd-mic-bias-supply = <&vreg_bob_3p296>;
61
62 qcom,micbias1-microvolt = <1800000>;
63 qcom,micbias2-microvolt = <1800000>;
64 qcom,micbias3-microvolt = <1800000>;
65 qcom,micbias4-microvolt = <1800000>;
66 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
67 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
68 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
69 qcom,rx-device = <&wcd_rx>;
70 qcom,tx-device = <&wcd_tx>;
71
72 qcom,hphl-jack-type-normally-closed;
73
74 #sound-dai-cells = <1>;
75 };
76
77 chosen {
78 stdout-path = "serial0:115200n8";
79 };
80
81 usb2_1_con: connector-0 {
82 compatible = "usb-a-connector";
83 vbus-supply = <&vcc_5v_peri>;
84
85 port {
86 usb2_1_connector: endpoint {
87 remote-endpoint = <&usb_hub_2_1>;
88 };
89 };
90 };
91
92 usb2_2_con: connector-1 {
93 compatible = "usb-a-connector";
94 vbus-supply = <&vcc_5v_peri>;
95
96 port {
97 usb2_2_connector: endpoint {
98 remote-endpoint = <&usb_hub_2_2>;
99 };
100 };
101 };
102
103 usb2_3_con: connector-2 {
104 compatible = "usb-a-connector";
105 vbus-supply = <&vcc_5v_peri>;
106
107 port {
108 usb2_3_connector: endpoint {
109 remote-endpoint = <&usb_hub_2_3>;
110 };
111 };
112 };
113
114 leds {
115 compatible = "gpio-leds";
116
117 pinctrl-0 = <&user_led>;
118 pinctrl-names = "default";
119
120 user-led {
121 color = <LED_COLOR_ID_BLUE>;
122 function = LED_FUNCTION_INDICATOR;
123 gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
124 linux,default-trigger = "none";
125 default-state = "off";
126 panic-indicator;
127 };
128 };
129
130 reserved-memory {
131 xbl_mem: xbl@80700000 {
132 reg = <0x0 0x80700000 0x0 0x100000>;
133 no-map;
134 };
135
136 cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
137 reg = <0x0 0x81800000 0x0 0x1e00000>;
138 no-map;
139 };
140
141 camera_mem: camera@84300000 {
142 reg = <0x0 0x84300000 0x0 0x500000>;
143 no-map;
144 };
145
146 adsp_mem: adsp@84800000 {
147 reg = <0x0 0x84800000 0x0 0x2800000>;
148 no-map;
149 };
150
151 cdsp_mem: cdsp@87000000 {
152 reg = <0x0 0x87000000 0x0 0x1e00000>;
153 no-map;
154 };
155
156 video_mem: video@88e00000 {
157 reg = <0x0 0x88e00000 0x0 0x700000>;
158 no-map;
159 };
160
161 cvp_mem: cvp@89500000 {
162 reg = <0x0 0x89500000 0x0 0x500000>;
163 no-map;
164 };
165
166 gpu_microcode_mem: gpu-microcode@89a00000 {
167 reg = <0x0 0x89a00000 0x0 0x2000>;
168 no-map;
169 };
170
171 tz_stat_mem: tz-stat@c0000000 {
172 reg = <0x0 0xc0000000 0x0 0x100000>;
173 no-map;
174 };
175
176 tags_mem: tags@c0100000 {
177 reg = <0x0 0xc0100000 0x0 0x1200000>;
178 no-map;
179 };
180
181 qtee_mem: qtee@c1300000 {
182 reg = <0x0 0xc1300000 0x0 0x500000>;
183 no-map;
184 };
185
186 trusted_apps_mem: trusted-apps@c1800000 {
187 reg = <0x0 0xc1800000 0x0 0x1c00000>;
188 no-map;
189 };
190
191 debug_vm_mem: debug-vm@d0600000 {
192 reg = <0x0 0xd0600000 0x0 0x100000>;
193 no-map;
194 };
195 };
196
197 thermal-zones {
198 msm-skin-thermal {
199 polling-delay-passive = <0>;
200 thermal-sensors = <&pmk8350_adc_tm 2>;
201 };
202
203 quiet-thermal {
204 polling-delay-passive = <0>;
205 thermal-sensors = <&pmk8350_adc_tm 1>;
206 };
207
208 ufs-thermal {
209 polling-delay-passive = <0>;
210 thermal-sensors = <&pmk8350_adc_tm 3>;
211 };
212
213 xo-thermal {
214 polling-delay-passive = <0>;
215 thermal-sensors = <&pmk8350_adc_tm 0>;
216 };
217 };
218
219 vcc_1v8: regulator-vcc-1v8 {
220 compatible = "regulator-fixed";
221 regulator-name = "vcc_1v8";
222 regulator-min-microvolt = <1800000>;
223 regulator-max-microvolt = <1800000>;
224 vin-supply = <&vcc_5v_peri>;
225
226 regulator-boot-on;
227 regulator-always-on;
228 };
229
230 vcc_3v3: regulator-vcc-3v3 {
231 compatible = "regulator-fixed";
232 regulator-name = "vcc_3v3";
233 regulator-min-microvolt = <3300000>;
234 regulator-max-microvolt = <3300000>;
235 vin-supply = <&vcc_5v_peri>;
236
237 regulator-boot-on;
238 regulator-always-on;
239 };
240
241 vcc_5v_peri: regulator-vcc-5v-peri {
242 compatible = "regulator-fixed";
243 regulator-name = "vcc_5v_peri";
244 regulator-min-microvolt = <5000000>;
245 regulator-max-microvolt = <5000000>;
246 vin-supply = <&vph_pwr>;
247
248 regulator-boot-on;
249 regulator-always-on;
250 };
251
252 vph_pwr: regulator-vph-pwr {
253 compatible = "regulator-fixed";
254 regulator-name = "vph_pwr";
255 regulator-min-microvolt = <3700000>;
256 regulator-max-microvolt = <3700000>;
257
258 regulator-boot-on;
259 regulator-always-on;
260 };
261 };
262
263 &apps_rsc {
264 regulators-0 {
265 compatible = "qcom,pm7325-rpmh-regulators";
266 qcom,pmic-id = "b";
267
268 vdd-s1-supply = <&vph_pwr>;
269 vdd-s2-supply = <&vph_pwr>;
270 vdd-s3-supply = <&vph_pwr>;
271 vdd-s4-supply = <&vph_pwr>;
272 vdd-s5-supply = <&vph_pwr>;
273 vdd-s6-supply = <&vph_pwr>;
274 vdd-s7-supply = <&vph_pwr>;
275 vdd-s8-supply = <&vph_pwr>;
276 vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p536>;
277 vdd-l2-l7-supply = <&vreg_bob_3p296>;
278 vdd-l6-l9-l10-supply = <&vreg_s8b_1p2>;
279 vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p84>;
280
281 vreg_s1b_1p84: smps1 {
282 regulator-name = "vreg_s1b_1p84";
283 regulator-min-microvolt = <1840000>;
284 regulator-max-microvolt = <2040000>;
285 };
286
287 vreg_s7b_0p536: smps7 {
288 regulator-name = "vreg_s7b_0p536";
289 regulator-min-microvolt = <536000>;
290 regulator-max-microvolt = <1120000>;
291 };
292
293 vreg_s8b_1p2: smps8 {
294 regulator-name = "vreg_s8b_1p2";
295 regulator-min-microvolt = <1200000>;
296 regulator-max-microvolt = <1496000>;
297 regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
298 };
299
300 vreg_l1b_0p912: ldo1 {
301 regulator-name = "vreg_l1b_0p912";
302 regulator-min-microvolt = <832000>;
303 regulator-max-microvolt = <920000>;
304 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
305 regulator-allow-set-load;
306 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
307 RPMH_REGULATOR_MODE_HPM>;
308 };
309
310 vreg_l2b_3p072: ldo2 {
311 regulator-name = "vreg_l2b_3p072";
312 regulator-min-microvolt = <2704000>;
313 regulator-max-microvolt = <3544000>;
314 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
315 regulator-allow-set-load;
316 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
317 RPMH_REGULATOR_MODE_HPM>;
318 };
319
320 vreg_l6b_1p2: ldo6 {
321 regulator-name = "vreg_l6b_1p2";
322 regulator-min-microvolt = <1200000>;
323 regulator-max-microvolt = <1256000>;
324 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
325 regulator-allow-set-load;
326 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
327 RPMH_REGULATOR_MODE_HPM>;
328 };
329
330 vreg_l7b_2p96: ldo7 {
331 regulator-name = "vreg_l7b_2p96";
332 regulator-min-microvolt = <2960000>;
333 regulator-max-microvolt = <2960000>;
334 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
335 regulator-allow-set-load;
336 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
337 RPMH_REGULATOR_MODE_HPM>;
338 };
339
340 vreg_l9b_1p2: ldo9 {
341 regulator-name = "vreg_l9b_1p2";
342 regulator-min-microvolt = <1200000>;
343 regulator-max-microvolt = <1304000>;
344 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
345 regulator-allow-set-load;
346 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
347 RPMH_REGULATOR_MODE_HPM>;
348 };
349
350 vreg_l17b_1p8: ldo17 {
351 regulator-name = "vreg_l17b_1p8";
352 regulator-min-microvolt = <1800000>;
353 regulator-max-microvolt = <1896000>;
354 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
355 };
356
357 vreg_l18b_1p8: ldo18 {
358 regulator-name = "vreg_l18b_1p8";
359 regulator-min-microvolt = <1800000>;
360 regulator-max-microvolt = <2000000>;
361 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
362 regulator-always-on;
363 };
364
365 vreg_l19b_1p8: ldo19 {
366 regulator-name = "vreg_l19b_1p8";
367 regulator-min-microvolt = <1800000>;
368 regulator-max-microvolt = <2000000>;
369 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
370 regulator-allow-set-load;
371 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
372 RPMH_REGULATOR_MODE_HPM>;
373 };
374 };
375
376 regulators-1 {
377 compatible = "qcom,pm8350c-rpmh-regulators";
378 qcom,pmic-id = "c";
379
380 vdd-s1-supply = <&vph_pwr>;
381 vdd-s2-supply = <&vph_pwr>;
382 vdd-s3-supply = <&vph_pwr>;
383 vdd-s4-supply = <&vph_pwr>;
384 vdd-s5-supply = <&vph_pwr>;
385 vdd-s6-supply = <&vph_pwr>;
386 vdd-s7-supply = <&vph_pwr>;
387 vdd-s8-supply = <&vph_pwr>;
388 vdd-s9-supply = <&vph_pwr>;
389 vdd-s10-supply = <&vph_pwr>;
390 vdd-l1-l12-supply = <&vreg_s1b_1p84>;
391 vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
392 vdd-l10-supply = <&vreg_s7b_0p536>;
393 vdd-bob-supply = <&vph_pwr>;
394
395 vreg_l1c_1p8: ldo1 {
396 regulator-name = "vreg_l1c_1p8";
397 regulator-min-microvolt = <1800000>;
398 regulator-max-microvolt = <1976000>;
399 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
400 regulator-allow-set-load;
401 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
402 RPMH_REGULATOR_MODE_HPM>;
403 };
404
405 vreg_l6c_2p96: ldo6 {
406 regulator-name = "vreg_l6c_2p96";
407 regulator-min-microvolt = <1650000>;
408 regulator-max-microvolt = <3544000>;
409 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
410 regulator-allow-set-load;
411 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
412 RPMH_REGULATOR_MODE_HPM>;
413 };
414
415 vreg_l9c_2p96: ldo9 {
416 regulator-name = "vreg_l9c_2p96";
417 regulator-min-microvolt = <2704000>;
418 regulator-max-microvolt = <3544000>;
419 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
420 regulator-allow-set-load;
421 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
422 RPMH_REGULATOR_MODE_HPM>;
423 };
424
425 vreg_l10c_0p88: ldo10 {
426 regulator-name = "vreg_l10c_0p88";
427 regulator-min-microvolt = <720000>;
428 regulator-max-microvolt = <1048000>;
429 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
430 regulator-allow-set-load;
431 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
432 RPMH_REGULATOR_MODE_HPM>;
433 };
434
435 vreg_bob_3p296: bob {
436 regulator-name = "vreg_bob_3p296";
437 regulator-min-microvolt = <3032000>;
438 regulator-max-microvolt = <3960000>;
439 };
440 };
441 };
442
443 &gcc {
444 protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
445 <GCC_MSS_CFG_AHB_CLK>,
446 <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
447 <GCC_MSS_OFFLINE_AXI_CLK>,
448 <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
449 <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
450 <GCC_MSS_SNOC_AXI_CLK>,
451 <GCC_SEC_CTRL_CLK_SRC>,
452 <GCC_WPSS_AHB_BDG_MST_CLK>,
453 <GCC_WPSS_AHB_CLK>,
454 <GCC_WPSS_RSCP_CLK>;
455 };
456
457 &gpi_dma0 {
458 status = "okay";
459 };
460
461 &gpi_dma1 {
462 status = "okay";
463 };
464
465 &gpu {
466 status = "okay";
467 };
468
469 &gpu_zap_shader {
470 firmware-name = "qcom/qcs6490/a660_zap.mbn";
471 };
472
473 /* Pin 13, 15 in GPIO header */
474 &i2c0 {
475 qcom,enable-gsi-dma;
476 status = "okay";
477 };
478
479 /* Pin 27, 28 in GPIO header */
480 &i2c2 {
481 qcom,enable-gsi-dma;
482 status = "okay";
483 };
484
485 /* Pin 3, 5 in GPIO header */
486 &i2c6 {
487 qcom,enable-gsi-dma;
488 status = "okay";
489 };
490
491 &i2c10 {
492 qcom,enable-gsi-dma;
493 status = "okay";
494
495 rtc: rtc@68 {
496 compatible = "st,m41t11";
497 reg = <0x68>;
498 };
499 };
500
501 /* External touchscreen */
502 &i2c13 {
503 qcom,enable-gsi-dma;
504 status = "okay";
505 };
506
507 &lpass_audiocc {
508 compatible = "qcom,qcm6490-lpassaudiocc";
509 /delete-property/ power-domains;
510 };
511
512 &lpass_rx_macro {
513 status = "okay";
514 };
515
516 &lpass_tx_macro {
517 status = "okay";
518 };
519
520 &lpass_va_macro {
521 status = "okay";
522 };
523
524 &pcie0 {
525 perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
526 wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
527
528 pinctrl-0 = <&pcie0_clkreq_n>, <&pcie0_reset_n>, <&pcie0_wake_n>;
529 pinctrl-names = "default";
530
531 status = "okay";
532 };
533
534 &pcie0_phy {
535 vdda-phy-supply = <&vreg_l10c_0p88>;
536 vdda-pll-supply = <&vreg_l6b_1p2>;
537
538 status = "okay";
539 };
540
541 &pcie1 {
542 perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
543 wake-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
544
545 pinctrl-0 = <&pcie1_clkreq_n>, <&pcie1_reset_n>, <&pcie1_wake_n>;
546 pinctrl-names = "default";
547
548 /* Support for QPS615 PCIe switch */
549 iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
550 <0x100 &apps_smmu 0x1c81 0x1>,
551 <0x208 &apps_smmu 0x1c84 0x1>,
552 <0x210 &apps_smmu 0x1c85 0x1>,
553 <0x218 &apps_smmu 0x1c86 0x1>,
554 <0x300 &apps_smmu 0x1c87 0x1>,
555 <0x400 &apps_smmu 0x1c88 0x1>,
556 <0x500 &apps_smmu 0x1c89 0x1>,
557 <0x501 &apps_smmu 0x1c90 0x1>;
558
559 status = "okay";
560 };
561
562 &pcie1_phy {
563 vdda-phy-supply = <&vreg_l10c_0p88>;
564 vdda-pll-supply = <&vreg_l6b_1p2>;
565
566 status = "okay";
567 };
568
569 &pm7325_gpios {
570 pm7325_adc_default: adc-default-state {
571 pins = "gpio2";
572 function = PMIC_GPIO_FUNC_NORMAL;
573 bias-high-impedance;
574 };
575 };
576
577 &pm7325_temp_alarm {
578 io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>;
579 io-channel-names = "thermal";
580 };
581
582 &pmk8350_adc_tm {
583 status = "okay";
584
585 xo-therm@0 {
586 reg = <0>;
587 io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
588 qcom,ratiometric;
589 qcom,hw-settle-time-us = <200>;
590 };
591
592 quiet-therm@1 {
593 reg = <1>;
594 io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
595 qcom,ratiometric;
596 qcom,hw-settle-time-us = <200>;
597 };
598
599 msm-skin-therm@2 {
600 reg = <2>;
601 io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
602 qcom,ratiometric;
603 qcom,hw-settle-time-us = <200>;
604 };
605
606 ufs-therm@3 {
607 reg = <3>;
608 io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO1_100K_PU>;
609 qcom,ratiometric;
610 qcom,hw-settle-time-us = <200>;
611 };
612 };
613
614 &pmk8350_vadc {
615 pinctrl-0 = <&pm7325_adc_default>;
616 pinctrl-names = "default";
617
618 channel@3 {
619 reg = <PMK8350_ADC7_DIE_TEMP>;
620 label = "pmk7325_die_temp";
621 qcom,pre-scaling = <1 1>;
622 };
623
624 channel@44 {
625 reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
626 label = "xo_therm";
627 qcom,hw-settle-time = <200>;
628 qcom,pre-scaling = <1 1>;
629 qcom,ratiometric;
630 };
631
632 channel@103 {
633 reg = <PM7325_ADC7_DIE_TEMP>;
634 label = "pm7325_die_temp";
635 qcom,pre-scaling = <1 1>;
636 };
637
638 channel@144 {
639 reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
640 qcom,ratiometric;
641 qcom,hw-settle-time = <200>;
642 qcom,pre-scaling = <1 1>;
643 label = "quiet_therm";
644 };
645
646 channel@146 {
647 reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
648 qcom,ratiometric;
649 qcom,hw-settle-time = <200>;
650 qcom,pre-scaling = <1 1>;
651 label = "msm_skin_therm";
652 };
653
654 channel@14a {
655 /* According to datasheet, 0x4a = AMUX1_GPIO = GPIO_02 */
656 reg = <PM7325_ADC7_GPIO1_100K_PU>;
657 qcom,ratiometric;
658 qcom,hw-settle-time = <200>;
659 qcom,pre-scaling = <1 1>;
660 label = "ufs_therm";
661 };
662 };
663
664 &pon_pwrkey {
665 status = "okay";
666 };
667
668 &qspi {
669 /* It's not possible to use QSPI with iommu */
670 /* due to an error in qcom_smmu_write_s2cr */
671 /delete-property/ iommus;
672
673 pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>,
674 <&qspi_data1>, <&qspi_data23>;
675 pinctrl-1 = <&qspi_sleep>;
676 pinctrl-names = "default", "sleep";
677
678 status = "okay";
679
680 spi_flash: flash@0 {
681 compatible = "winbond,w25q256", "jedec,spi-nor";
682 reg = <0>;
683
684 spi-max-frequency = <104000000>;
685 spi-tx-bus-width = <4>;
686 spi-rx-bus-width = <4>;
687 };
688 };
689
690 &qupv3_id_0 {
691 firmware-name = "qcom/qcm6490/qupv3fw.elf";
692 status = "okay";
693 };
694
695 &qupv3_id_1 {
696 firmware-name = "qcom/qcm6490/qupv3fw.elf";
697 status = "okay";
698 };
699
700 &remoteproc_adsp {
701 firmware-name = "qcom/qcs6490/radxa/dragon-q6a/adsp.mbn";
702 status = "okay";
703 };
704
705 &remoteproc_cdsp {
706 firmware-name = "qcom/qcs6490/cdsp.mbn";
707 status = "okay";
708 };
709
710 &sdhc_1 {
711 non-removable;
712 no-sd;
713 no-sdio;
714
715 vmmc-supply = <&vreg_l7b_2p96>;
716 vqmmc-supply = <&vreg_l19b_1p8>;
717
718 status = "okay";
719 };
720
721 &sdhc_2 {
722 pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
723 pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
724
725 vmmc-supply = <&vreg_l9c_2p96>;
726 vqmmc-supply = <&vreg_l6c_2p96>;
727
728 cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
729 status = "okay";
730 };
731
732 &sound {
733 compatible = "qcom,qcs6490-rb3gen2-sndcard";
734 model = "QCS6490-Radxa-Dragon-Q6A";
735
736 audio-routing = "IN1_HPHL", "HPHL_OUT",
737 "IN2_HPHR", "HPHR_OUT",
738 "AMIC2", "MIC BIAS2",
739 "TX SWR_ADC1", "ADC2_OUTPUT";
740
741 wcd-playback-dai-link {
742 link-name = "WCD Playback";
743
744 codec {
745 sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>;
746 };
747
748 cpu {
749 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
750 };
751
752 platform {
753 sound-dai = <&q6apm>;
754 };
755 };
756
757 wcd-capture-dai-link {
758 link-name = "WCD Capture";
759
760 codec {
761 sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>;
762 };
763
764 cpu {
765 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
766 };
767
768 platform {
769 sound-dai = <&q6apm>;
770 };
771 };
772 };
773
774 /* Pin 11, 29, 31, 32 in GPIO header */
775 &spi7 {
776 qcom,enable-gsi-dma;
777 status = "okay";
778 };
779
780 /* Pin 19, 21, 23, 24, 26 in GPIO header */
781 &spi12 {
782 qcom,enable-gsi-dma;
783 status = "okay";
784 };
785
786 /* Pin 22, 33, 36, 37 in GPIO header */
787 &spi14 {
788 qcom,enable-gsi-dma;
789 status = "okay";
790 };
791
792 &swr0 {
793 status = "okay";
794
795 wcd_rx: codec@0,4 {
796 compatible = "sdw20217010d00";
797 reg = <0 4>;
798 qcom,rx-port-mapping = <1 2 3 4 5>;
799 };
800 };
801
802 &swr1 {
803 status = "okay";
804
805 wcd_tx: codec@0,3 {
806 compatible = "sdw20217010d00";
807 reg = <0 3>;
808 qcom,tx-port-mapping = <1 1 2 3>;
809 };
810 };
811
812 &tlmm {
813 gpio-line-names =
814 /* GPIO_0 ~ GPIO_3 */
815 "PIN_13", "PIN_15", "", "",
816 /* GPIO_4 ~ GPIO_7 */
817 "", "", "", "",
818 /* GPIO_8 ~ GPIO_11 */
819 "PIN_27", "PIN_28", "", "",
820 /* GPIO_12 ~ GPIO_15 */
821 "", "", "", "",
822 /* GPIO_16 ~ GPIO_19 */
823 "", "", "", "",
824 /* GPIO_20 ~ GPIO_23 */
825 "", "", "PIN_8", "PIN_10",
826 /* GPIO_24 ~ GPIO_27 */
827 "PIN_3", "PIN_5", "PIN_16", "PIN_27",
828 /* GPIO_28 ~ GPIO_31 */
829 "PIN_31", "PIN_11", "PIN_32", "PIN_29",
830 /* GPIO_32 ~ GPIO_35 */
831 "", "", "", "",
832 /* GPIO_36 ~ GPIO_39 */
833 "", "", "", "",
834 /* GPIO_40 ~ GPIO_43 */
835 "", "", "", "",
836 /* GPIO_44 ~ GPIO_47 */
837 "", "", "", "",
838 /* GPIO_48 ~ GPIO_51 */
839 "PIN_21", "PIN_19", "PIN_23", "PIN_24",
840 /* GPIO_52 ~ GPIO_55 */
841 "", "", "", "PIN_26",
842 /* GPIO_56 ~ GPIO_59 */
843 "PIN_33", "PIN_22", "PIN_37", "PIN_36",
844 /* GPIO_60 ~ GPIO_63 */
845 "", "", "", "",
846 /* GPIO_64 ~ GPIO_67 */
847 "", "", "", "",
848 /* GPIO_68 ~ GPIO_71 */
849 "", "", "", "",
850 /* GPIO_72 ~ GPIO_75 */
851 "", "", "", "",
852 /* GPIO_76 ~ GPIO_79 */
853 "", "", "", "",
854 /* GPIO_80 ~ GPIO_83 */
855 "", "", "", "",
856 /* GPIO_84 ~ GPIO_87 */
857 "", "", "", "",
858 /* GPIO_88 ~ GPIO_91 */
859 "", "", "", "",
860 /* GPIO_92 ~ GPIO_95 */
861 "", "", "", "",
862 /* GPIO_96 ~ GPIO_99 */
863 "PIN_7", "PIN_12", "PIN_38", "PIN_40",
864 /* GPIO_100 ~ GPIO_103 */
865 "PIN_35", "", "", "",
866 /* GPIO_104 ~ GPIO_107 */
867 "", "", "", "",
868 /* GPIO_108 ~ GPIO_111 */
869 "", "", "", "",
870 /* GPIO_112 ~ GPIO_115 */
871 "", "", "", "",
872 /* GPIO_116 ~ GPIO_119 */
873 "", "", "", "",
874 /* GPIO_120 ~ GPIO_123 */
875 "", "", "", "",
876 /* GPIO_124 ~ GPIO_127 */
877 "", "", "", "",
878 /* GPIO_128 ~ GPIO_131 */
879 "", "", "", "",
880 /* GPIO_132 ~ GPIO_135 */
881 "", "", "", "",
882 /* GPIO_136 ~ GPIO_139 */
883 "", "", "", "",
884 /* GPIO_140 ~ GPIO_143 */
885 "", "", "", "",
886 /* GPIO_144 ~ GPIO_147 */
887 "", "", "", "",
888 /* GPIO_148 ~ GPIO_151 */
889 "", "", "", "",
890 /* GPIO_152 ~ GPIO_155 */
891 "", "", "", "",
892 /* GPIO_156 ~ GPIO_159 */
893 "", "", "", "",
894 /* GPIO_160 ~ GPIO_163 */
895 "", "", "", "",
896 /* GPIO_164 ~ GPIO_167 */
897 "", "", "", "",
898 /* GPIO_168 ~ GPIO_171 */
899 "", "", "", "",
900 /* GPIO_172 ~ GPIO_174 */
901 "", "", "";
902
903 pcie0_reset_n: pcie0-reset-n-state {
904 pins = "gpio87";
905 function = "gpio";
906 drive-strength = <2>;
907 bias-disable;
908 };
909
910 pcie0_wake_n: pcie0-wake-n-state {
911 pins = "gpio89";
912 function = "gpio";
913 drive-strength = <2>;
914 bias-pull-up;
915 };
916
917 pcie1_reset_n: pcie1-reset-n-state {
918 pins = "gpio2";
919 function = "gpio";
920 drive-strength = <2>;
921 bias-disable;
922 };
923
924 pcie1_wake_n: pcie1-wake-n-state {
925 pins = "gpio3";
926 function = "gpio";
927 drive-strength = <2>;
928 bias-pull-up;
929 };
930
931 qspi_sleep: qspi-sleep-state {
932 pins = "gpio12", "gpio13", "gpio14", "gpio15", "gpio16", "gpio17";
933 function = "gpio";
934 output-disable;
935 };
936
937 sd_cd: sd-cd-state {
938 pins = "gpio91";
939 function = "gpio";
940 bias-pull-up;
941 };
942
943 user_led: user-led-state {
944 pins = "gpio42";
945 function = "gpio";
946 bias-pull-up;
947 };
948
949 wcd_default: wcd-reset-n-active-state {
950 pins = "gpio83";
951 function = "gpio";
952 drive-strength = <16>;
953 bias-disable;
954 output-low;
955 };
956 };
957
958 &uart5 {
959 status = "okay";
960 };
961
962 &usb_2 {
963 dr_mode = "host";
964
965 #address-cells = <1>;
966 #size-cells = <0>;
967
968 status = "okay";
969
970 /* Onboard USB 2.0 hub */
971 usb_hub_2_x: hub@1 {
972 compatible = "usb1a40,0101";
973 reg = <1>;
974 vdd-supply = <&vcc_5v_peri>;
975 #address-cells = <1>;
976 #size-cells = <0>;
977
978 ports {
979 #address-cells = <1>;
980 #size-cells = <0>;
981
982 port@1 {
983 reg = <1>;
984
985 usb_hub_2_1: endpoint {
986 remote-endpoint = <&usb2_1_connector>;
987 };
988 };
989
990 port@2 {
991 reg = <2>;
992
993 usb_hub_2_2: endpoint {
994 remote-endpoint = <&usb2_2_connector>;
995 };
996 };
997
998 port@3 {
999 reg = <3>;
1000
1001 usb_hub_2_3: endpoint {
1002 remote-endpoint = <&usb2_3_connector>;
1003 };
1004 };
1005 };
1006
1007 /* FCU760K Wi-Fi & Bluetooth module */
1008 wifi@4 {
1009 compatible = "usba69c,8d80";
1010 reg = <4>;
1011 };
1012 };
1013 };
1014
1015 &usb_2_hsphy {
1016 vdda-pll-supply = <&vreg_l10c_0p88>;
1017 vdda33-supply = <&vreg_l2b_3p072>;
1018 vdda18-supply = <&vreg_l1c_1p8>;
1019
1020 status = "okay";
1021 };
1022
1023 &venus {
1024 status = "okay";
1025 };
1026
1027 /* PINCTRL - additions to nodes defined in sc7280.dtsi */
1028 &pcie0_clkreq_n {
1029 bias-pull-up;
1030 drive-strength = <2>;
1031 };
1032
1033 &pcie1_clkreq_n {
1034 bias-pull-up;
1035 drive-strength = <2>;
1036 };
1037
1038 &qspi_clk {
1039 bias-disable;
1040 drive-strength = <16>;
1041 };
1042
1043 &qspi_cs0 {
1044 bias-disable;
1045 drive-strength = <8>;
1046 };
1047
1048 &qspi_data0 {
1049 bias-disable;
1050 drive-strength = <8>;
1051 };
1052
1053 &qspi_data1 {
1054 bias-disable;
1055 drive-strength = <8>;
1056 };
1057
1058 &qspi_data23 {
1059 bias-disable;
1060 drive-strength = <8>;
1061 };
1062
1063 &sdc1_clk {
1064 bias-disable;
1065 drive-strength = <16>;
1066 };
1067
1068 &sdc1_cmd {
1069 bias-pull-up;
1070 drive-strength = <10>;
1071 };
1072
1073 &sdc1_data {
1074 bias-pull-up;
1075 drive-strength = <10>;
1076 };
1077
1078 &sdc1_rclk {
1079 bias-pull-down;
1080 };
1081
1082 &sdc2_clk {
1083 bias-disable;
1084 drive-strength = <16>;
1085 };
1086
1087 &sdc2_cmd {
1088 bias-pull-up;
1089 drive-strength = <10>;
1090 };
1091
1092 &sdc2_data {
1093 bias-pull-up;
1094 drive-strength = <10>;
1095 };