| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Copyright (c) 2018, Linaro Limited |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 7 |
#include <dt-bindings/clock/qcom,gcc-qcs404.h> |
| 8 |
#include <dt-bindings/clock/qcom,turingcc-qcs404.h> |
| 9 |
#include <dt-bindings/clock/qcom,rpmcc.h> |
| 10 |
#include <dt-bindings/power/qcom-rpmpd.h> |
| 11 |
#include <dt-bindings/thermal/thermal.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
interrupt-parent = <&intc>; |
| 15 |
|
| 16 |
#address-cells = <2>; |
| 17 |
#size-cells = <2>; |
| 18 |
|
| 19 |
chosen { }; |
| 20 |
|
| 21 |
clocks { |
| 22 |
xo_board: xo-board { |
| 23 |
compatible = "fixed-clock"; |
| 24 |
#clock-cells = <0>; |
| 25 |
clock-frequency = <19200000>; |
| 26 |
}; |
| 27 |
|
| 28 |
sleep_clk: sleep-clk { |
| 29 |
compatible = "fixed-clock"; |
| 30 |
#clock-cells = <0>; |
| 31 |
clock-frequency = <32764>; |
| 32 |
}; |
| 33 |
}; |
| 34 |
|
| 35 |
cpus { |
| 36 |
#address-cells = <1>; |
| 37 |
#size-cells = <0>; |
| 38 |
|
| 39 |
cpu0: cpu@100 { |
| 40 |
device_type = "cpu"; |
| 41 |
compatible = "arm,cortex-a53"; |
| 42 |
reg = <0x100>; |
| 43 |
enable-method = "psci"; |
| 44 |
cpu-idle-states = <&cpu_sleep_0>; |
| 45 |
next-level-cache = <&l2_0>; |
| 46 |
#cooling-cells = <2>; |
| 47 |
clocks = <&apcs_glb>; |
| 48 |
operating-points-v2 = <&cpu_opp_table>; |
| 49 |
power-domains = <&cpr>; |
| 50 |
power-domain-names = "cpr"; |
| 51 |
}; |
| 52 |
|
| 53 |
cpu1: cpu@101 { |
| 54 |
device_type = "cpu"; |
| 55 |
compatible = "arm,cortex-a53"; |
| 56 |
reg = <0x101>; |
| 57 |
enable-method = "psci"; |
| 58 |
cpu-idle-states = <&cpu_sleep_0>; |
| 59 |
next-level-cache = <&l2_0>; |
| 60 |
#cooling-cells = <2>; |
| 61 |
clocks = <&apcs_glb>; |
| 62 |
operating-points-v2 = <&cpu_opp_table>; |
| 63 |
power-domains = <&cpr>; |
| 64 |
power-domain-names = "cpr"; |
| 65 |
}; |
| 66 |
|
| 67 |
cpu2: cpu@102 { |
| 68 |
device_type = "cpu"; |
| 69 |
compatible = "arm,cortex-a53"; |
| 70 |
reg = <0x102>; |
| 71 |
enable-method = "psci"; |
| 72 |
cpu-idle-states = <&cpu_sleep_0>; |
| 73 |
next-level-cache = <&l2_0>; |
| 74 |
#cooling-cells = <2>; |
| 75 |
clocks = <&apcs_glb>; |
| 76 |
operating-points-v2 = <&cpu_opp_table>; |
| 77 |
power-domains = <&cpr>; |
| 78 |
power-domain-names = "cpr"; |
| 79 |
}; |
| 80 |
|
| 81 |
cpu3: cpu@103 { |
| 82 |
device_type = "cpu"; |
| 83 |
compatible = "arm,cortex-a53"; |
| 84 |
reg = <0x103>; |
| 85 |
enable-method = "psci"; |
| 86 |
cpu-idle-states = <&cpu_sleep_0>; |
| 87 |
next-level-cache = <&l2_0>; |
| 88 |
#cooling-cells = <2>; |
| 89 |
clocks = <&apcs_glb>; |
| 90 |
operating-points-v2 = <&cpu_opp_table>; |
| 91 |
power-domains = <&cpr>; |
| 92 |
power-domain-names = "cpr"; |
| 93 |
}; |
| 94 |
|
| 95 |
l2_0: l2-cache { |
| 96 |
compatible = "cache"; |
| 97 |
cache-level = <2>; |
| 98 |
cache-unified; |
| 99 |
}; |
| 100 |
|
| 101 |
idle-states { |
| 102 |
entry-method = "psci"; |
| 103 |
|
| 104 |
cpu_sleep_0: cpu-sleep-0 { |
| 105 |
compatible = "arm,idle-state"; |
| 106 |
idle-state-name = "standalone-power-collapse"; |
| 107 |
arm,psci-suspend-param = <0x40000003>; |
| 108 |
entry-latency-us = <125>; |
| 109 |
exit-latency-us = <180>; |
| 110 |
min-residency-us = <595>; |
| 111 |
local-timer-stop; |
| 112 |
}; |
| 113 |
}; |
| 114 |
}; |
| 115 |
|
| 116 |
cpu_opp_table: opp-table-cpu { |
| 117 |
compatible = "operating-points-v2-kryo-cpu"; |
| 118 |
opp-shared; |
| 119 |
|
| 120 |
opp-1094400000 { |
| 121 |
opp-hz = /bits/ 64 <1094400000>; |
| 122 |
required-opps = <&cpr_opp1>; |
| 123 |
}; |
| 124 |
opp-1248000000 { |
| 125 |
opp-hz = /bits/ 64 <1248000000>; |
| 126 |
required-opps = <&cpr_opp2>; |
| 127 |
}; |
| 128 |
opp-1401600000 { |
| 129 |
opp-hz = /bits/ 64 <1401600000>; |
| 130 |
required-opps = <&cpr_opp3>; |
| 131 |
}; |
| 132 |
}; |
| 133 |
|
| 134 |
cpr_opp_table: opp-table-cpr { |
| 135 |
compatible = "operating-points-v2-qcom-level"; |
| 136 |
|
| 137 |
cpr_opp1: opp1 { |
| 138 |
opp-level = <1>; |
| 139 |
qcom,opp-fuse-level = <1>; |
| 140 |
}; |
| 141 |
cpr_opp2: opp2 { |
| 142 |
opp-level = <2>; |
| 143 |
qcom,opp-fuse-level = <2>; |
| 144 |
}; |
| 145 |
cpr_opp3: opp3 { |
| 146 |
opp-level = <3>; |
| 147 |
qcom,opp-fuse-level = <3>; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
firmware { |
| 152 |
scm: scm { |
| 153 |
compatible = "qcom,scm-qcs404", "qcom,scm"; |
| 154 |
#reset-cells = <1>; |
| 155 |
}; |
| 156 |
}; |
| 157 |
|
| 158 |
memory@80000000 { |
| 159 |
device_type = "memory"; |
| 160 |
/* We expect the bootloader to fill in the size */ |
| 161 |
reg = <0 0x80000000 0 0>; |
| 162 |
}; |
| 163 |
|
| 164 |
psci { |
| 165 |
compatible = "arm,psci-1.0"; |
| 166 |
method = "smc"; |
| 167 |
}; |
| 168 |
|
| 169 |
rpm: remoteproc { |
| 170 |
compatible = "qcom,qcs404-rpm-proc", "qcom,rpm-proc"; |
| 171 |
|
| 172 |
glink-edge { |
| 173 |
compatible = "qcom,glink-rpm"; |
| 174 |
|
| 175 |
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; |
| 176 |
qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| 177 |
mboxes = <&apcs_glb 0>; |
| 178 |
|
| 179 |
rpm_requests: rpm-requests { |
| 180 |
compatible = "qcom,rpm-qcs404", "qcom,glink-smd-rpm"; |
| 181 |
qcom,glink-channels = "rpm_requests"; |
| 182 |
|
| 183 |
rpmcc: clock-controller { |
| 184 |
compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc"; |
| 185 |
#clock-cells = <1>; |
| 186 |
clocks = <&xo_board>; |
| 187 |
clock-names = "xo"; |
| 188 |
}; |
| 189 |
|
| 190 |
rpmpd: power-controller { |
| 191 |
compatible = "qcom,qcs404-rpmpd"; |
| 192 |
#power-domain-cells = <1>; |
| 193 |
operating-points-v2 = <&rpmpd_opp_table>; |
| 194 |
|
| 195 |
rpmpd_opp_table: opp-table { |
| 196 |
compatible = "operating-points-v2"; |
| 197 |
|
| 198 |
rpmpd_opp_ret: opp1 { |
| 199 |
opp-level = <16>; |
| 200 |
}; |
| 201 |
|
| 202 |
rpmpd_opp_ret_plus: opp2 { |
| 203 |
opp-level = <32>; |
| 204 |
}; |
| 205 |
|
| 206 |
rpmpd_opp_min_svs: opp3 { |
| 207 |
opp-level = <48>; |
| 208 |
}; |
| 209 |
|
| 210 |
rpmpd_opp_low_svs: opp4 { |
| 211 |
opp-level = <64>; |
| 212 |
}; |
| 213 |
|
| 214 |
rpmpd_opp_svs: opp5 { |
| 215 |
opp-level = <128>; |
| 216 |
}; |
| 217 |
|
| 218 |
rpmpd_opp_svs_plus: opp6 { |
| 219 |
opp-level = <192>; |
| 220 |
}; |
| 221 |
|
| 222 |
rpmpd_opp_nom: opp7 { |
| 223 |
opp-level = <256>; |
| 224 |
}; |
| 225 |
|
| 226 |
rpmpd_opp_nom_plus: opp8 { |
| 227 |
opp-level = <320>; |
| 228 |
}; |
| 229 |
|
| 230 |
rpmpd_opp_turbo: opp9 { |
| 231 |
opp-level = <384>; |
| 232 |
}; |
| 233 |
|
| 234 |
rpmpd_opp_turbo_no_cpr: opp10 { |
| 235 |
opp-level = <416>; |
| 236 |
}; |
| 237 |
|
| 238 |
rpmpd_opp_turbo_plus: opp11 { |
| 239 |
opp-level = <512>; |
| 240 |
}; |
| 241 |
}; |
| 242 |
}; |
| 243 |
}; |
| 244 |
}; |
| 245 |
}; |
| 246 |
|
| 247 |
reserved-memory { |
| 248 |
#address-cells = <2>; |
| 249 |
#size-cells = <2>; |
| 250 |
ranges; |
| 251 |
|
| 252 |
tz_apps_mem: memory@85900000 { |
| 253 |
reg = <0 0x85900000 0 0x500000>; |
| 254 |
no-map; |
| 255 |
}; |
| 256 |
|
| 257 |
xbl_mem: memory@85e00000 { |
| 258 |
reg = <0 0x85e00000 0 0x100000>; |
| 259 |
no-map; |
| 260 |
}; |
| 261 |
|
| 262 |
smem_region: memory@85f00000 { |
| 263 |
reg = <0 0x85f00000 0 0x200000>; |
| 264 |
no-map; |
| 265 |
}; |
| 266 |
|
| 267 |
tz_mem: memory@86100000 { |
| 268 |
reg = <0 0x86100000 0 0x300000>; |
| 269 |
no-map; |
| 270 |
}; |
| 271 |
|
| 272 |
wlan_fw_mem: memory@86400000 { |
| 273 |
reg = <0 0x86400000 0 0x1100000>; |
| 274 |
no-map; |
| 275 |
}; |
| 276 |
|
| 277 |
adsp_fw_mem: memory@87500000 { |
| 278 |
reg = <0 0x87500000 0 0x1a00000>; |
| 279 |
no-map; |
| 280 |
}; |
| 281 |
|
| 282 |
cdsp_fw_mem: memory@88f00000 { |
| 283 |
reg = <0 0x88f00000 0 0x600000>; |
| 284 |
no-map; |
| 285 |
}; |
| 286 |
|
| 287 |
wlan_msa_mem: memory@89500000 { |
| 288 |
reg = <0 0x89500000 0 0x100000>; |
| 289 |
no-map; |
| 290 |
}; |
| 291 |
|
| 292 |
uefi_mem: memory@9f800000 { |
| 293 |
reg = <0 0x9f800000 0 0x800000>; |
| 294 |
no-map; |
| 295 |
}; |
| 296 |
}; |
| 297 |
|
| 298 |
smem { |
| 299 |
compatible = "qcom,smem"; |
| 300 |
|
| 301 |
memory-region = <&smem_region>; |
| 302 |
qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| 303 |
|
| 304 |
hwlocks = <&tcsr_mutex 3>; |
| 305 |
}; |
| 306 |
|
| 307 |
soc: soc@0 { |
| 308 |
#address-cells = <1>; |
| 309 |
#size-cells = <1>; |
| 310 |
ranges = <0 0 0 0xffffffff>; |
| 311 |
compatible = "simple-bus"; |
| 312 |
|
| 313 |
turingcc: clock-controller@800000 { |
| 314 |
compatible = "qcom,qcs404-turingcc"; |
| 315 |
reg = <0x00800000 0x30000>; |
| 316 |
clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>; |
| 317 |
|
| 318 |
#clock-cells = <1>; |
| 319 |
#reset-cells = <1>; |
| 320 |
|
| 321 |
status = "disabled"; |
| 322 |
}; |
| 323 |
|
| 324 |
rpm_msg_ram: sram@60000 { |
| 325 |
compatible = "qcom,rpm-msg-ram"; |
| 326 |
reg = <0x00060000 0x6000>; |
| 327 |
}; |
| 328 |
|
| 329 |
usb3_phy: phy@78000 { |
| 330 |
compatible = "qcom,usb-ss-28nm-phy"; |
| 331 |
reg = <0x00078000 0x400>; |
| 332 |
#phy-cells = <0>; |
| 333 |
clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, |
| 334 |
<&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, |
| 335 |
<&gcc GCC_USB3_PHY_PIPE_CLK>; |
| 336 |
clock-names = "ref", "ahb", "pipe"; |
| 337 |
resets = <&gcc GCC_USB3_PHY_BCR>, |
| 338 |
<&gcc GCC_USB3PHY_PHY_BCR>; |
| 339 |
reset-names = "com", "phy"; |
| 340 |
status = "disabled"; |
| 341 |
}; |
| 342 |
|
| 343 |
usb2_phy_prim: phy@7a000 { |
| 344 |
compatible = "qcom,usb-hs-28nm-femtophy"; |
| 345 |
reg = <0x0007a000 0x200>; |
| 346 |
#phy-cells = <0>; |
| 347 |
clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, |
| 348 |
<&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, |
| 349 |
<&gcc GCC_USB2A_PHY_SLEEP_CLK>; |
| 350 |
clock-names = "ref", "ahb", "sleep"; |
| 351 |
resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>, |
| 352 |
<&gcc GCC_USB2A_PHY_BCR>; |
| 353 |
reset-names = "phy", "por"; |
| 354 |
status = "disabled"; |
| 355 |
}; |
| 356 |
|
| 357 |
usb2_phy_sec: phy@7c000 { |
| 358 |
compatible = "qcom,usb-hs-28nm-femtophy"; |
| 359 |
reg = <0x0007c000 0x200>; |
| 360 |
#phy-cells = <0>; |
| 361 |
clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, |
| 362 |
<&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, |
| 363 |
<&gcc GCC_USB2A_PHY_SLEEP_CLK>; |
| 364 |
clock-names = "ref", "ahb", "sleep"; |
| 365 |
resets = <&gcc GCC_QUSB2_PHY_BCR>, |
| 366 |
<&gcc GCC_USB2_HS_PHY_ONLY_BCR>; |
| 367 |
reset-names = "phy", "por"; |
| 368 |
status = "disabled"; |
| 369 |
}; |
| 370 |
|
| 371 |
qfprom: qfprom@a4000 { |
| 372 |
compatible = "qcom,qcs404-qfprom", "qcom,qfprom"; |
| 373 |
reg = <0x000a4000 0x1000>; |
| 374 |
#address-cells = <1>; |
| 375 |
#size-cells = <1>; |
| 376 |
cpr_efuse_speedbin: speedbin@13c { |
| 377 |
reg = <0x13c 0x4>; |
| 378 |
bits = <2 3>; |
| 379 |
}; |
| 380 |
|
| 381 |
tsens_s0_p1: s0-p1@1f8 { |
| 382 |
reg = <0x1f8 0x1>; |
| 383 |
bits = <0 6>; |
| 384 |
}; |
| 385 |
|
| 386 |
tsens_s0_p2: s0-p2@1f8 { |
| 387 |
reg = <0x1f8 0x2>; |
| 388 |
bits = <6 6>; |
| 389 |
}; |
| 390 |
|
| 391 |
tsens_s1_p1: s1-p1@1f9 { |
| 392 |
reg = <0x1f9 0x2>; |
| 393 |
bits = <4 6>; |
| 394 |
}; |
| 395 |
|
| 396 |
tsens_s1_p2: s1-p2@1fa { |
| 397 |
reg = <0x1fa 0x1>; |
| 398 |
bits = <2 6>; |
| 399 |
}; |
| 400 |
|
| 401 |
tsens_s2_p1: s2-p1@1fb { |
| 402 |
reg = <0x1fb 0x1>; |
| 403 |
bits = <0 6>; |
| 404 |
}; |
| 405 |
|
| 406 |
tsens_s2_p2: s2-p2@1fb { |
| 407 |
reg = <0x1fb 0x2>; |
| 408 |
bits = <6 6>; |
| 409 |
}; |
| 410 |
|
| 411 |
tsens_s3_p1: s3-p1@1fc { |
| 412 |
reg = <0x1fc 0x2>; |
| 413 |
bits = <4 6>; |
| 414 |
}; |
| 415 |
|
| 416 |
tsens_s3_p2: s3-p2@1fd { |
| 417 |
reg = <0x1fd 0x1>; |
| 418 |
bits = <2 6>; |
| 419 |
}; |
| 420 |
|
| 421 |
tsens_s4_p1: s4-p1@1fe { |
| 422 |
reg = <0x1fe 0x1>; |
| 423 |
bits = <0 6>; |
| 424 |
}; |
| 425 |
|
| 426 |
tsens_s4_p2: s4-p2@1fe { |
| 427 |
reg = <0x1fe 0x2>; |
| 428 |
bits = <6 6>; |
| 429 |
}; |
| 430 |
|
| 431 |
tsens_s5_p1: s5-p1@200 { |
| 432 |
reg = <0x200 0x1>; |
| 433 |
bits = <0 6>; |
| 434 |
}; |
| 435 |
|
| 436 |
tsens_s5_p2: s5-p2@200 { |
| 437 |
reg = <0x200 0x2>; |
| 438 |
bits = <6 6>; |
| 439 |
}; |
| 440 |
|
| 441 |
tsens_s6_p1: s6-p1@201 { |
| 442 |
reg = <0x201 0x2>; |
| 443 |
bits = <4 6>; |
| 444 |
}; |
| 445 |
|
| 446 |
tsens_s6_p2: s6-p2@202 { |
| 447 |
reg = <0x202 0x1>; |
| 448 |
bits = <2 6>; |
| 449 |
}; |
| 450 |
|
| 451 |
tsens_s7_p1: s7-p1@203 { |
| 452 |
reg = <0x203 0x1>; |
| 453 |
bits = <0 6>; |
| 454 |
}; |
| 455 |
|
| 456 |
tsens_s7_p2: s7-p2@203 { |
| 457 |
reg = <0x203 0x2>; |
| 458 |
bits = <6 6>; |
| 459 |
}; |
| 460 |
|
| 461 |
tsens_s8_p1: s8-p1@204 { |
| 462 |
reg = <0x204 0x2>; |
| 463 |
bits = <4 6>; |
| 464 |
}; |
| 465 |
|
| 466 |
tsens_s8_p2: s8-p2@205 { |
| 467 |
reg = <0x205 0x1>; |
| 468 |
bits = <2 6>; |
| 469 |
}; |
| 470 |
|
| 471 |
tsens_s9_p1: s9-p1@206 { |
| 472 |
reg = <0x206 0x1>; |
| 473 |
bits = <0 6>; |
| 474 |
}; |
| 475 |
|
| 476 |
tsens_s9_p2: s9-p2@206 { |
| 477 |
reg = <0x206 0x2>; |
| 478 |
bits = <6 6>; |
| 479 |
}; |
| 480 |
|
| 481 |
tsens_mode: mode@208 { |
| 482 |
reg = <0x208 1>; |
| 483 |
bits = <0 3>; |
| 484 |
}; |
| 485 |
|
| 486 |
tsens_base1: base1@208 { |
| 487 |
reg = <0x208 2>; |
| 488 |
bits = <3 8>; |
| 489 |
}; |
| 490 |
|
| 491 |
tsens_base2: base2@208 { |
| 492 |
reg = <0x209 2>; |
| 493 |
bits = <3 8>; |
| 494 |
}; |
| 495 |
|
| 496 |
cpr_efuse_quot_offset1: qoffset1@231 { |
| 497 |
reg = <0x231 0x4>; |
| 498 |
bits = <4 7>; |
| 499 |
}; |
| 500 |
cpr_efuse_quot_offset2: qoffset2@232 { |
| 501 |
reg = <0x232 0x4>; |
| 502 |
bits = <3 7>; |
| 503 |
}; |
| 504 |
cpr_efuse_quot_offset3: qoffset3@233 { |
| 505 |
reg = <0x233 0x4>; |
| 506 |
bits = <2 7>; |
| 507 |
}; |
| 508 |
cpr_efuse_init_voltage1: ivoltage1@229 { |
| 509 |
reg = <0x229 0x4>; |
| 510 |
bits = <4 6>; |
| 511 |
}; |
| 512 |
cpr_efuse_init_voltage2: ivoltage2@22a { |
| 513 |
reg = <0x22a 0x4>; |
| 514 |
bits = <2 6>; |
| 515 |
}; |
| 516 |
cpr_efuse_init_voltage3: ivoltage3@22b { |
| 517 |
reg = <0x22b 0x4>; |
| 518 |
bits = <0 6>; |
| 519 |
}; |
| 520 |
cpr_efuse_quot1: quot1@22b { |
| 521 |
reg = <0x22b 0x4>; |
| 522 |
bits = <6 12>; |
| 523 |
}; |
| 524 |
cpr_efuse_quot2: quot2@22d { |
| 525 |
reg = <0x22d 0x4>; |
| 526 |
bits = <2 12>; |
| 527 |
}; |
| 528 |
cpr_efuse_quot3: quot3@230 { |
| 529 |
reg = <0x230 0x4>; |
| 530 |
bits = <0 12>; |
| 531 |
}; |
| 532 |
cpr_efuse_ring1: ring1@228 { |
| 533 |
reg = <0x228 0x4>; |
| 534 |
bits = <0 3>; |
| 535 |
}; |
| 536 |
cpr_efuse_ring2: ring2@228 { |
| 537 |
reg = <0x228 0x4>; |
| 538 |
bits = <4 3>; |
| 539 |
}; |
| 540 |
cpr_efuse_ring3: ring3@229 { |
| 541 |
reg = <0x229 0x4>; |
| 542 |
bits = <0 3>; |
| 543 |
}; |
| 544 |
cpr_efuse_revision: revision@218 { |
| 545 |
reg = <0x218 0x4>; |
| 546 |
bits = <3 3>; |
| 547 |
}; |
| 548 |
}; |
| 549 |
|
| 550 |
rng: rng@e3000 { |
| 551 |
compatible = "qcom,prng-ee"; |
| 552 |
reg = <0x000e3000 0x1000>; |
| 553 |
clocks = <&gcc GCC_PRNG_AHB_CLK>; |
| 554 |
clock-names = "core"; |
| 555 |
}; |
| 556 |
|
| 557 |
bimc: interconnect@400000 { |
| 558 |
reg = <0x00400000 0x80000>; |
| 559 |
compatible = "qcom,qcs404-bimc"; |
| 560 |
#interconnect-cells = <1>; |
| 561 |
}; |
| 562 |
|
| 563 |
tsens: thermal-sensor@4a9000 { |
| 564 |
compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; |
| 565 |
reg = <0x004a9000 0x1000>, /* TM */ |
| 566 |
<0x004a8000 0x1000>; /* SROT */ |
| 567 |
nvmem-cells = <&tsens_mode>, |
| 568 |
<&tsens_base1>, <&tsens_base2>, |
| 569 |
<&tsens_s0_p1>, <&tsens_s0_p2>, |
| 570 |
<&tsens_s1_p1>, <&tsens_s1_p2>, |
| 571 |
<&tsens_s2_p1>, <&tsens_s2_p2>, |
| 572 |
<&tsens_s3_p1>, <&tsens_s3_p2>, |
| 573 |
<&tsens_s4_p1>, <&tsens_s4_p2>, |
| 574 |
<&tsens_s5_p1>, <&tsens_s5_p2>, |
| 575 |
<&tsens_s6_p1>, <&tsens_s6_p2>, |
| 576 |
<&tsens_s7_p1>, <&tsens_s7_p2>, |
| 577 |
<&tsens_s8_p1>, <&tsens_s8_p2>, |
| 578 |
<&tsens_s9_p1>, <&tsens_s9_p2>; |
| 579 |
nvmem-cell-names = "mode", |
| 580 |
"base1", "base2", |
| 581 |
"s0_p1", "s0_p2", |
| 582 |
"s1_p1", "s1_p2", |
| 583 |
"s2_p1", "s2_p2", |
| 584 |
"s3_p1", "s3_p2", |
| 585 |
"s4_p1", "s4_p2", |
| 586 |
"s5_p1", "s5_p2", |
| 587 |
"s6_p1", "s6_p2", |
| 588 |
"s7_p1", "s7_p2", |
| 589 |
"s8_p1", "s8_p2", |
| 590 |
"s9_p1", "s9_p2"; |
| 591 |
#qcom,sensors = <10>; |
| 592 |
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; |
| 593 |
interrupt-names = "uplow"; |
| 594 |
#thermal-sensor-cells = <1>; |
| 595 |
}; |
| 596 |
|
| 597 |
pcnoc: interconnect@500000 { |
| 598 |
reg = <0x00500000 0x15080>; |
| 599 |
compatible = "qcom,qcs404-pcnoc"; |
| 600 |
#interconnect-cells = <1>; |
| 601 |
}; |
| 602 |
|
| 603 |
snoc: interconnect@580000 { |
| 604 |
reg = <0x00580000 0x23080>; |
| 605 |
compatible = "qcom,qcs404-snoc"; |
| 606 |
#interconnect-cells = <1>; |
| 607 |
}; |
| 608 |
|
| 609 |
remoteproc_cdsp: remoteproc@b00000 { |
| 610 |
compatible = "qcom,qcs404-cdsp-pas"; |
| 611 |
reg = <0x00b00000 0x4040>; |
| 612 |
|
| 613 |
interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, |
| 614 |
<&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| 615 |
<&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| 616 |
<&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| 617 |
<&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| 618 |
interrupt-names = "wdog", "fatal", "ready", |
| 619 |
"handover", "stop-ack"; |
| 620 |
|
| 621 |
clocks = <&xo_board>; |
| 622 |
clock-names = "xo"; |
| 623 |
|
| 624 |
/* |
| 625 |
* If the node was using the PIL binding, then include properties: |
| 626 |
* clocks = <&xo_board>, |
| 627 |
* <&gcc GCC_CDSP_CFG_AHB_CLK>, |
| 628 |
* <&gcc GCC_CDSP_TBU_CLK>, |
| 629 |
* <&gcc GCC_BIMC_CDSP_CLK>, |
| 630 |
* <&turingcc TURING_WRAPPER_AON_CLK>, |
| 631 |
* <&turingcc TURING_Q6SS_AHBS_AON_CLK>, |
| 632 |
* <&turingcc TURING_Q6SS_AHBM_AON_CLK>, |
| 633 |
* <&turingcc TURING_Q6SS_Q6_AXIM_CLK>; |
| 634 |
* clock-names = "xo", |
| 635 |
* "sway", |
| 636 |
* "tbu", |
| 637 |
* "bimc", |
| 638 |
* "ahb_aon", |
| 639 |
* "q6ss_slave", |
| 640 |
* "q6ss_master", |
| 641 |
* "q6_axim"; |
| 642 |
* resets = <&gcc GCC_CDSP_RESTART>; |
| 643 |
* reset-names = "restart"; |
| 644 |
* qcom,halt-regs = <&tcsr 0x19004>; |
| 645 |
*/ |
| 646 |
|
| 647 |
memory-region = <&cdsp_fw_mem>; |
| 648 |
|
| 649 |
qcom,smem-states = <&cdsp_smp2p_out 0>; |
| 650 |
qcom,smem-state-names = "stop"; |
| 651 |
|
| 652 |
status = "disabled"; |
| 653 |
|
| 654 |
glink-edge { |
| 655 |
interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; |
| 656 |
|
| 657 |
qcom,remote-pid = <5>; |
| 658 |
mboxes = <&apcs_glb 12>; |
| 659 |
|
| 660 |
label = "cdsp"; |
| 661 |
}; |
| 662 |
}; |
| 663 |
|
| 664 |
usb3: usb@7678800 { |
| 665 |
compatible = "qcom,qcs404-dwc3", "qcom,dwc3"; |
| 666 |
reg = <0x07678800 0x400>; |
| 667 |
#address-cells = <1>; |
| 668 |
#size-cells = <1>; |
| 669 |
ranges; |
| 670 |
clocks = <&gcc GCC_USB30_MASTER_CLK>, |
| 671 |
<&gcc GCC_SYS_NOC_USB3_CLK>, |
| 672 |
<&gcc GCC_USB30_SLEEP_CLK>, |
| 673 |
<&gcc GCC_USB30_MOCK_UTMI_CLK>; |
| 674 |
clock-names = "core", "iface", "sleep", "mock_utmi"; |
| 675 |
assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, |
| 676 |
<&gcc GCC_USB30_MASTER_CLK>; |
| 677 |
assigned-clock-rates = <19200000>, <200000000>; |
| 678 |
|
| 679 |
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, |
| 680 |
<GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, |
| 681 |
<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; |
| 682 |
interrupt-names = "pwr_event", |
| 683 |
"hs_phy_irq", |
| 684 |
"qusb2_phy"; |
| 685 |
|
| 686 |
status = "disabled"; |
| 687 |
|
| 688 |
usb3_dwc3: usb@7580000 { |
| 689 |
compatible = "snps,dwc3"; |
| 690 |
reg = <0x07580000 0xcd00>; |
| 691 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 692 |
phys = <&usb2_phy_prim>, <&usb3_phy>; |
| 693 |
phy-names = "usb2-phy", "usb3-phy"; |
| 694 |
snps,has-lpm-erratum; |
| 695 |
snps,hird-threshold = /bits/ 8 <0x10>; |
| 696 |
snps,usb3_lpm_capable; |
| 697 |
snps,dis-u1-entry-quirk; |
| 698 |
snps,dis-u2-entry-quirk; |
| 699 |
dr_mode = "otg"; |
| 700 |
}; |
| 701 |
}; |
| 702 |
|
| 703 |
usb2: usb@79b8800 { |
| 704 |
compatible = "qcom,qcs404-dwc3", "qcom,dwc3"; |
| 705 |
reg = <0x079b8800 0x400>; |
| 706 |
#address-cells = <1>; |
| 707 |
#size-cells = <1>; |
| 708 |
ranges; |
| 709 |
clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>, |
| 710 |
<&gcc GCC_PCNOC_USB2_CLK>, |
| 711 |
<&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>, |
| 712 |
<&gcc GCC_USB20_MOCK_UTMI_CLK>; |
| 713 |
clock-names = "core", "iface", "sleep", "mock_utmi"; |
| 714 |
assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, |
| 715 |
<&gcc GCC_USB_HS_SYSTEM_CLK>; |
| 716 |
assigned-clock-rates = <19200000>, <133333333>; |
| 717 |
|
| 718 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, |
| 719 |
<GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, |
| 720 |
<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; |
| 721 |
interrupt-names = "pwr_event", |
| 722 |
"hs_phy_irq", |
| 723 |
"qusb2_phy"; |
| 724 |
|
| 725 |
status = "disabled"; |
| 726 |
|
| 727 |
usb@78c0000 { |
| 728 |
compatible = "snps,dwc3"; |
| 729 |
reg = <0x078c0000 0xcc00>; |
| 730 |
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| 731 |
phys = <&usb2_phy_sec>; |
| 732 |
phy-names = "usb2-phy"; |
| 733 |
snps,has-lpm-erratum; |
| 734 |
snps,hird-threshold = /bits/ 8 <0x10>; |
| 735 |
snps,usb3_lpm_capable; |
| 736 |
snps,dis-u1-entry-quirk; |
| 737 |
snps,dis-u2-entry-quirk; |
| 738 |
dr_mode = "peripheral"; |
| 739 |
}; |
| 740 |
}; |
| 741 |
|
| 742 |
tlmm: pinctrl@1000000 { |
| 743 |
compatible = "qcom,qcs404-pinctrl"; |
| 744 |
reg = <0x01000000 0x200000>, |
| 745 |
<0x01300000 0x200000>, |
| 746 |
<0x07b00000 0x200000>; |
| 747 |
reg-names = "south", "north", "east"; |
| 748 |
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| 749 |
gpio-ranges = <&tlmm 0 0 120>; |
| 750 |
gpio-controller; |
| 751 |
#gpio-cells = <2>; |
| 752 |
interrupt-controller; |
| 753 |
#interrupt-cells = <2>; |
| 754 |
|
| 755 |
blsp1_i2c0_default: blsp1-i2c0-default-state { |
| 756 |
pins = "gpio32", "gpio33"; |
| 757 |
function = "blsp_i2c0"; |
| 758 |
}; |
| 759 |
|
| 760 |
blsp1_i2c1_default: blsp1-i2c1-default-state { |
| 761 |
pins = "gpio24", "gpio25"; |
| 762 |
function = "blsp_i2c1"; |
| 763 |
}; |
| 764 |
|
| 765 |
blsp1_i2c2_default: blsp1-i2c2-default-state { |
| 766 |
sda-pins { |
| 767 |
pins = "gpio19"; |
| 768 |
function = "blsp_i2c_sda_a2"; |
| 769 |
}; |
| 770 |
|
| 771 |
scl-pins { |
| 772 |
pins = "gpio20"; |
| 773 |
function = "blsp_i2c_scl_a2"; |
| 774 |
}; |
| 775 |
}; |
| 776 |
|
| 777 |
blsp1_i2c3_default: blsp1-i2c3-default-state { |
| 778 |
pins = "gpio84", "gpio85"; |
| 779 |
function = "blsp_i2c3"; |
| 780 |
}; |
| 781 |
|
| 782 |
blsp1_i2c4_default: blsp1-i2c4-default-state { |
| 783 |
pins = "gpio117", "gpio118"; |
| 784 |
function = "blsp_i2c4"; |
| 785 |
}; |
| 786 |
|
| 787 |
blsp1_uart0_default: blsp1-uart0-default-state { |
| 788 |
pins = "gpio30", "gpio31", "gpio32", "gpio33"; |
| 789 |
function = "blsp_uart0"; |
| 790 |
}; |
| 791 |
|
| 792 |
blsp1_uart1_default: blsp1-uart1-default-state { |
| 793 |
pins = "gpio22", "gpio23"; |
| 794 |
function = "blsp_uart1"; |
| 795 |
}; |
| 796 |
|
| 797 |
blsp1_uart2_default: blsp1-uart2-default-state { |
| 798 |
rx-pins { |
| 799 |
pins = "gpio18"; |
| 800 |
function = "blsp_uart_rx_a2"; |
| 801 |
}; |
| 802 |
|
| 803 |
tx-pins { |
| 804 |
pins = "gpio17"; |
| 805 |
function = "blsp_uart_tx_a2"; |
| 806 |
}; |
| 807 |
}; |
| 808 |
|
| 809 |
blsp1_uart3_default: blsp1-uart3-default-state { |
| 810 |
cts-pins { |
| 811 |
pins = "gpio84"; |
| 812 |
function = "blsp_uart3"; |
| 813 |
}; |
| 814 |
|
| 815 |
rts-tx-pins { |
| 816 |
pins = "gpio85", "gpio82"; |
| 817 |
function = "blsp_uart3"; |
| 818 |
}; |
| 819 |
|
| 820 |
rx-pins { |
| 821 |
pins = "gpio83"; |
| 822 |
function = "blsp_uart3"; |
| 823 |
}; |
| 824 |
}; |
| 825 |
|
| 826 |
blsp2_i2c0_default: blsp2-i2c0-default-state { |
| 827 |
pins = "gpio28", "gpio29"; |
| 828 |
function = "blsp_i2c5"; |
| 829 |
}; |
| 830 |
|
| 831 |
blsp1_spi0_default: blsp1-spi0-default-state { |
| 832 |
pins = "gpio30", "gpio31", "gpio32", "gpio33"; |
| 833 |
function = "blsp_spi0"; |
| 834 |
}; |
| 835 |
|
| 836 |
blsp1_spi1_default: blsp1-spi1-default-state { |
| 837 |
mosi-pins { |
| 838 |
pins = "gpio22"; |
| 839 |
function = "blsp_spi_mosi_a1"; |
| 840 |
}; |
| 841 |
|
| 842 |
miso-pins { |
| 843 |
pins = "gpio23"; |
| 844 |
function = "blsp_spi_miso_a1"; |
| 845 |
}; |
| 846 |
|
| 847 |
cs-n-pins { |
| 848 |
pins = "gpio24"; |
| 849 |
function = "blsp_spi_cs_n_a1"; |
| 850 |
}; |
| 851 |
|
| 852 |
clk-pins { |
| 853 |
pins = "gpio25"; |
| 854 |
function = "blsp_spi_clk_a1"; |
| 855 |
}; |
| 856 |
}; |
| 857 |
|
| 858 |
blsp1_spi2_default: blsp1-spi2-default-state { |
| 859 |
pins = "gpio17", "gpio18", "gpio19", "gpio20"; |
| 860 |
function = "blsp_spi2"; |
| 861 |
}; |
| 862 |
|
| 863 |
blsp1_spi3_default: blsp1-spi3-default-state { |
| 864 |
pins = "gpio82", "gpio83", "gpio84", "gpio85"; |
| 865 |
function = "blsp_spi3"; |
| 866 |
}; |
| 867 |
|
| 868 |
blsp1_spi4_default: blsp1-spi4-default-state { |
| 869 |
pins = "gpio37", "gpio38", "gpio117", "gpio118"; |
| 870 |
function = "blsp_spi4"; |
| 871 |
}; |
| 872 |
|
| 873 |
blsp2_spi0_default: blsp2-spi0-default-state { |
| 874 |
pins = "gpio26", "gpio27", "gpio28", "gpio29"; |
| 875 |
function = "blsp_spi5"; |
| 876 |
}; |
| 877 |
|
| 878 |
blsp2_uart0_default: blsp2-uart0-default-state { |
| 879 |
pins = "gpio26", "gpio27", "gpio28", "gpio29"; |
| 880 |
function = "blsp_uart5"; |
| 881 |
}; |
| 882 |
}; |
| 883 |
|
| 884 |
gcc: clock-controller@1800000 { |
| 885 |
compatible = "qcom,gcc-qcs404"; |
| 886 |
reg = <0x01800000 0x80000>; |
| 887 |
#clock-cells = <1>; |
| 888 |
#reset-cells = <1>; |
| 889 |
#power-domain-cells = <1>; |
| 890 |
|
| 891 |
clocks = <&xo_board>, |
| 892 |
<&sleep_clk>, |
| 893 |
<&pcie_phy>, |
| 894 |
<0>, |
| 895 |
<0>, |
| 896 |
<0>; |
| 897 |
|
| 898 |
assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>; |
| 899 |
assigned-clock-rates = <19200000>; |
| 900 |
}; |
| 901 |
|
| 902 |
tcsr_mutex: hwlock@1905000 { |
| 903 |
compatible = "qcom,tcsr-mutex"; |
| 904 |
reg = <0x01905000 0x20000>; |
| 905 |
#hwlock-cells = <1>; |
| 906 |
}; |
| 907 |
|
| 908 |
tcsr: syscon@1937000 { |
| 909 |
compatible = "qcom,qcs404-tcsr", "syscon"; |
| 910 |
reg = <0x01937000 0x25000>; |
| 911 |
}; |
| 912 |
|
| 913 |
sram@290000 { |
| 914 |
compatible = "qcom,rpm-stats"; |
| 915 |
reg = <0x00290000 0x10000>; |
| 916 |
}; |
| 917 |
|
| 918 |
spmi_bus: spmi@200f000 { |
| 919 |
compatible = "qcom,spmi-pmic-arb"; |
| 920 |
reg = <0x0200f000 0x001000>, |
| 921 |
<0x02400000 0x800000>, |
| 922 |
<0x02c00000 0x800000>, |
| 923 |
<0x03800000 0x200000>, |
| 924 |
<0x0200a000 0x002100>; |
| 925 |
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| 926 |
interrupt-names = "periph_irq"; |
| 927 |
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; |
| 928 |
qcom,ee = <0>; |
| 929 |
qcom,channel = <0>; |
| 930 |
#address-cells = <2>; |
| 931 |
#size-cells = <0>; |
| 932 |
interrupt-controller; |
| 933 |
#interrupt-cells = <4>; |
| 934 |
}; |
| 935 |
|
| 936 |
remoteproc_wcss: remoteproc@7400000 { |
| 937 |
compatible = "qcom,qcs404-wcss-pas"; |
| 938 |
reg = <0x07400000 0x4040>; |
| 939 |
|
| 940 |
interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, |
| 941 |
<&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| 942 |
<&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| 943 |
<&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| 944 |
<&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| 945 |
interrupt-names = "wdog", "fatal", "ready", |
| 946 |
"handover", "stop-ack"; |
| 947 |
|
| 948 |
clocks = <&xo_board>; |
| 949 |
clock-names = "xo"; |
| 950 |
|
| 951 |
memory-region = <&wlan_fw_mem>; |
| 952 |
|
| 953 |
qcom,smem-states = <&wcss_smp2p_out 0>; |
| 954 |
qcom,smem-state-names = "stop"; |
| 955 |
|
| 956 |
status = "disabled"; |
| 957 |
|
| 958 |
glink-edge { |
| 959 |
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; |
| 960 |
|
| 961 |
qcom,remote-pid = <1>; |
| 962 |
mboxes = <&apcs_glb 16>; |
| 963 |
|
| 964 |
label = "wcss"; |
| 965 |
}; |
| 966 |
}; |
| 967 |
|
| 968 |
pcie_phy: phy@7786000 { |
| 969 |
compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; |
| 970 |
reg = <0x07786000 0xb8>; |
| 971 |
|
| 972 |
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; |
| 973 |
resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, |
| 974 |
<&gcc GCC_PCIE_0_PIPE_ARES>; |
| 975 |
reset-names = "phy", "pipe"; |
| 976 |
|
| 977 |
clock-output-names = "pcie_0_pipe_clk"; |
| 978 |
#clock-cells = <0>; |
| 979 |
#phy-cells = <0>; |
| 980 |
|
| 981 |
status = "disabled"; |
| 982 |
}; |
| 983 |
|
| 984 |
sdcc1: mmc@7804000 { |
| 985 |
compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"; |
| 986 |
reg = <0x07804000 0x1000>, <0x7805000 0x1000>; |
| 987 |
reg-names = "hc", "cqhci"; |
| 988 |
|
| 989 |
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| 990 |
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| 991 |
interrupt-names = "hc_irq", "pwr_irq"; |
| 992 |
|
| 993 |
clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| 994 |
<&gcc GCC_SDCC1_APPS_CLK>, |
| 995 |
<&xo_board>; |
| 996 |
clock-names = "iface", "core", "xo"; |
| 997 |
|
| 998 |
status = "disabled"; |
| 999 |
}; |
| 1000 |
|
| 1001 |
blsp1_dma: dma-controller@7884000 { |
| 1002 |
compatible = "qcom,bam-v1.7.0"; |
| 1003 |
reg = <0x07884000 0x25000>; |
| 1004 |
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; |
| 1005 |
clocks = <&gcc GCC_BLSP1_AHB_CLK>; |
| 1006 |
clock-names = "bam_clk"; |
| 1007 |
#dma-cells = <1>; |
| 1008 |
qcom,ee = <0>; |
| 1009 |
status = "okay"; |
| 1010 |
}; |
| 1011 |
|
| 1012 |
blsp1_uart0: serial@78af000 { |
| 1013 |
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| 1014 |
reg = <0x078af000 0x200>; |
| 1015 |
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| 1016 |
clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| 1017 |
clock-names = "core", "iface"; |
| 1018 |
dmas = <&blsp1_dma 0>, <&blsp1_dma 1>; |
| 1019 |
dma-names = "tx", "rx"; |
| 1020 |
pinctrl-names = "default"; |
| 1021 |
pinctrl-0 = <&blsp1_uart0_default>; |
| 1022 |
status = "disabled"; |
| 1023 |
}; |
| 1024 |
|
| 1025 |
blsp1_uart1: serial@78b0000 { |
| 1026 |
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| 1027 |
reg = <0x078b0000 0x200>; |
| 1028 |
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| 1029 |
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| 1030 |
clock-names = "core", "iface"; |
| 1031 |
dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; |
| 1032 |
dma-names = "tx", "rx"; |
| 1033 |
pinctrl-names = "default"; |
| 1034 |
pinctrl-0 = <&blsp1_uart1_default>; |
| 1035 |
status = "disabled"; |
| 1036 |
}; |
| 1037 |
|
| 1038 |
blsp1_uart2: serial@78b1000 { |
| 1039 |
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| 1040 |
reg = <0x078b1000 0x200>; |
| 1041 |
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; |
| 1042 |
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| 1043 |
clock-names = "core", "iface"; |
| 1044 |
dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; |
| 1045 |
dma-names = "tx", "rx"; |
| 1046 |
pinctrl-names = "default"; |
| 1047 |
pinctrl-0 = <&blsp1_uart2_default>; |
| 1048 |
status = "okay"; |
| 1049 |
}; |
| 1050 |
|
| 1051 |
ethernet: ethernet@7a80000 { |
| 1052 |
compatible = "qcom,qcs404-ethqos"; |
| 1053 |
reg = <0x07a80000 0x10000>, |
| 1054 |
<0x07a96000 0x100>; |
| 1055 |
reg-names = "stmmaceth", "rgmii"; |
| 1056 |
clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; |
| 1057 |
clocks = <&gcc GCC_ETH_AXI_CLK>, |
| 1058 |
<&gcc GCC_ETH_SLAVE_AHB_CLK>, |
| 1059 |
<&gcc GCC_ETH_PTP_CLK>, |
| 1060 |
<&gcc GCC_ETH_RGMII_CLK>; |
| 1061 |
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, |
| 1062 |
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| 1063 |
interrupt-names = "macirq", "eth_lpi"; |
| 1064 |
|
| 1065 |
snps,tso; |
| 1066 |
rx-fifo-depth = <4096>; |
| 1067 |
tx-fifo-depth = <4096>; |
| 1068 |
|
| 1069 |
status = "disabled"; |
| 1070 |
}; |
| 1071 |
|
| 1072 |
wifi: wifi@a000000 { |
| 1073 |
compatible = "qcom,wcn3990-wifi"; |
| 1074 |
reg = <0xa000000 0x800000>; |
| 1075 |
reg-names = "membase"; |
| 1076 |
memory-region = <&wlan_msa_mem>; |
| 1077 |
interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, |
| 1078 |
<GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, |
| 1079 |
<GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, |
| 1080 |
<GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, |
| 1081 |
<GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, |
| 1082 |
<GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, |
| 1083 |
<GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, |
| 1084 |
<GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, |
| 1085 |
<GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, |
| 1086 |
<GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, |
| 1087 |
<GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, |
| 1088 |
<GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; |
| 1089 |
status = "disabled"; |
| 1090 |
}; |
| 1091 |
|
| 1092 |
blsp1_uart3: serial@78b2000 { |
| 1093 |
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| 1094 |
reg = <0x078b2000 0x200>; |
| 1095 |
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; |
| 1096 |
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| 1097 |
clock-names = "core", "iface"; |
| 1098 |
dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; |
| 1099 |
dma-names = "tx", "rx"; |
| 1100 |
pinctrl-names = "default"; |
| 1101 |
pinctrl-0 = <&blsp1_uart3_default>; |
| 1102 |
status = "disabled"; |
| 1103 |
}; |
| 1104 |
|
| 1105 |
blsp1_i2c0: i2c@78b5000 { |
| 1106 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 1107 |
reg = <0x078b5000 0x600>; |
| 1108 |
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| 1109 |
clocks = <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>, |
| 1110 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1111 |
clock-names = "core", "iface"; |
| 1112 |
pinctrl-names = "default"; |
| 1113 |
pinctrl-0 = <&blsp1_i2c0_default>; |
| 1114 |
#address-cells = <1>; |
| 1115 |
#size-cells = <0>; |
| 1116 |
status = "disabled"; |
| 1117 |
}; |
| 1118 |
|
| 1119 |
blsp1_spi0: spi@78b5000 { |
| 1120 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 1121 |
reg = <0x078b5000 0x600>; |
| 1122 |
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| 1123 |
clocks = <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>, |
| 1124 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1125 |
clock-names = "core", "iface"; |
| 1126 |
pinctrl-names = "default"; |
| 1127 |
pinctrl-0 = <&blsp1_spi0_default>; |
| 1128 |
#address-cells = <1>; |
| 1129 |
#size-cells = <0>; |
| 1130 |
status = "disabled"; |
| 1131 |
}; |
| 1132 |
|
| 1133 |
blsp1_i2c1: i2c@78b6000 { |
| 1134 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 1135 |
reg = <0x078b6000 0x600>; |
| 1136 |
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 1137 |
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, |
| 1138 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1139 |
clock-names = "core", "iface"; |
| 1140 |
pinctrl-names = "default"; |
| 1141 |
pinctrl-0 = <&blsp1_i2c1_default>; |
| 1142 |
#address-cells = <1>; |
| 1143 |
#size-cells = <0>; |
| 1144 |
status = "disabled"; |
| 1145 |
}; |
| 1146 |
|
| 1147 |
blsp1_spi1: spi@78b6000 { |
| 1148 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 1149 |
reg = <0x078b6000 0x600>; |
| 1150 |
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 1151 |
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, |
| 1152 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1153 |
clock-names = "core", "iface"; |
| 1154 |
pinctrl-names = "default"; |
| 1155 |
pinctrl-0 = <&blsp1_spi1_default>; |
| 1156 |
#address-cells = <1>; |
| 1157 |
#size-cells = <0>; |
| 1158 |
status = "disabled"; |
| 1159 |
}; |
| 1160 |
|
| 1161 |
blsp1_i2c2: i2c@78b7000 { |
| 1162 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 1163 |
reg = <0x078b7000 0x600>; |
| 1164 |
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| 1165 |
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, |
| 1166 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1167 |
clock-names = "core", "iface"; |
| 1168 |
pinctrl-names = "default"; |
| 1169 |
pinctrl-0 = <&blsp1_i2c2_default>; |
| 1170 |
#address-cells = <1>; |
| 1171 |
#size-cells = <0>; |
| 1172 |
status = "disabled"; |
| 1173 |
}; |
| 1174 |
|
| 1175 |
blsp1_spi2: spi@78b7000 { |
| 1176 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 1177 |
reg = <0x078b7000 0x600>; |
| 1178 |
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| 1179 |
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, |
| 1180 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1181 |
clock-names = "core", "iface"; |
| 1182 |
pinctrl-names = "default"; |
| 1183 |
pinctrl-0 = <&blsp1_spi2_default>; |
| 1184 |
#address-cells = <1>; |
| 1185 |
#size-cells = <0>; |
| 1186 |
status = "disabled"; |
| 1187 |
}; |
| 1188 |
|
| 1189 |
blsp1_i2c3: i2c@78b8000 { |
| 1190 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 1191 |
reg = <0x078b8000 0x600>; |
| 1192 |
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| 1193 |
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, |
| 1194 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1195 |
clock-names = "core", "iface"; |
| 1196 |
pinctrl-names = "default"; |
| 1197 |
pinctrl-0 = <&blsp1_i2c3_default>; |
| 1198 |
#address-cells = <1>; |
| 1199 |
#size-cells = <0>; |
| 1200 |
status = "disabled"; |
| 1201 |
}; |
| 1202 |
|
| 1203 |
blsp1_spi3: spi@78b8000 { |
| 1204 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 1205 |
reg = <0x078b8000 0x600>; |
| 1206 |
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| 1207 |
clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, |
| 1208 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1209 |
clock-names = "core", "iface"; |
| 1210 |
pinctrl-names = "default"; |
| 1211 |
pinctrl-0 = <&blsp1_spi3_default>; |
| 1212 |
#address-cells = <1>; |
| 1213 |
#size-cells = <0>; |
| 1214 |
status = "disabled"; |
| 1215 |
}; |
| 1216 |
|
| 1217 |
blsp1_i2c4: i2c@78b9000 { |
| 1218 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 1219 |
reg = <0x078b9000 0x600>; |
| 1220 |
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| 1221 |
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, |
| 1222 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1223 |
clock-names = "core", "iface"; |
| 1224 |
pinctrl-names = "default"; |
| 1225 |
pinctrl-0 = <&blsp1_i2c4_default>; |
| 1226 |
#address-cells = <1>; |
| 1227 |
#size-cells = <0>; |
| 1228 |
status = "disabled"; |
| 1229 |
}; |
| 1230 |
|
| 1231 |
blsp1_spi4: spi@78b9000 { |
| 1232 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 1233 |
reg = <0x078b9000 0x600>; |
| 1234 |
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| 1235 |
clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, |
| 1236 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1237 |
clock-names = "core", "iface"; |
| 1238 |
pinctrl-names = "default"; |
| 1239 |
pinctrl-0 = <&blsp1_spi4_default>; |
| 1240 |
#address-cells = <1>; |
| 1241 |
#size-cells = <0>; |
| 1242 |
status = "disabled"; |
| 1243 |
}; |
| 1244 |
|
| 1245 |
blsp2_dma: dma-controller@7ac4000 { |
| 1246 |
compatible = "qcom,bam-v1.7.0"; |
| 1247 |
reg = <0x07ac4000 0x17000>; |
| 1248 |
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; |
| 1249 |
clocks = <&gcc GCC_BLSP2_AHB_CLK>; |
| 1250 |
clock-names = "bam_clk"; |
| 1251 |
#dma-cells = <1>; |
| 1252 |
qcom,ee = <0>; |
| 1253 |
status = "disabled"; |
| 1254 |
}; |
| 1255 |
|
| 1256 |
blsp2_uart0: serial@7aef000 { |
| 1257 |
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| 1258 |
reg = <0x07aef000 0x200>; |
| 1259 |
interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; |
| 1260 |
clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; |
| 1261 |
clock-names = "core", "iface"; |
| 1262 |
dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; |
| 1263 |
dma-names = "tx", "rx"; |
| 1264 |
pinctrl-names = "default"; |
| 1265 |
pinctrl-0 = <&blsp2_uart0_default>; |
| 1266 |
status = "disabled"; |
| 1267 |
}; |
| 1268 |
|
| 1269 |
blsp2_i2c0: i2c@7af5000 { |
| 1270 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 1271 |
reg = <0x07af5000 0x600>; |
| 1272 |
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; |
| 1273 |
clocks = <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>, |
| 1274 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 1275 |
clock-names = "core", "iface"; |
| 1276 |
pinctrl-names = "default"; |
| 1277 |
pinctrl-0 = <&blsp2_i2c0_default>; |
| 1278 |
#address-cells = <1>; |
| 1279 |
#size-cells = <0>; |
| 1280 |
status = "disabled"; |
| 1281 |
}; |
| 1282 |
|
| 1283 |
blsp2_spi0: spi@7af5000 { |
| 1284 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 1285 |
reg = <0x07af5000 0x600>; |
| 1286 |
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; |
| 1287 |
clocks = <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>, |
| 1288 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 1289 |
clock-names = "core", "iface"; |
| 1290 |
pinctrl-names = "default"; |
| 1291 |
pinctrl-0 = <&blsp2_spi0_default>; |
| 1292 |
#address-cells = <1>; |
| 1293 |
#size-cells = <0>; |
| 1294 |
status = "disabled"; |
| 1295 |
}; |
| 1296 |
|
| 1297 |
sram@8600000 { |
| 1298 |
compatible = "qcom,qcs404-imem", "syscon", "simple-mfd"; |
| 1299 |
reg = <0x08600000 0x1000>; |
| 1300 |
|
| 1301 |
#address-cells = <1>; |
| 1302 |
#size-cells = <1>; |
| 1303 |
|
| 1304 |
ranges = <0 0x08600000 0x1000>; |
| 1305 |
|
| 1306 |
pil-reloc@94c { |
| 1307 |
compatible = "qcom,pil-reloc-info"; |
| 1308 |
reg = <0x94c 0xc8>; |
| 1309 |
}; |
| 1310 |
}; |
| 1311 |
|
| 1312 |
intc: interrupt-controller@b000000 { |
| 1313 |
compatible = "qcom,msm-qgic2"; |
| 1314 |
interrupt-controller; |
| 1315 |
#address-cells = <0>; |
| 1316 |
#interrupt-cells = <3>; |
| 1317 |
reg = <0x0b000000 0x1000>, |
| 1318 |
<0x0b002000 0x1000>; |
| 1319 |
}; |
| 1320 |
|
| 1321 |
apcs_glb: mailbox@b011000 { |
| 1322 |
compatible = "qcom,qcs404-apcs-apps-global", |
| 1323 |
"qcom,msm8916-apcs-kpss-global", "syscon"; |
| 1324 |
reg = <0x0b011000 0x1000>; |
| 1325 |
#mbox-cells = <1>; |
| 1326 |
clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; |
| 1327 |
clock-names = "pll", "aux"; |
| 1328 |
#clock-cells = <0>; |
| 1329 |
}; |
| 1330 |
|
| 1331 |
apcs_hfpll: clock-controller@b016000 { |
| 1332 |
compatible = "qcom,qcs404-hfpll"; |
| 1333 |
reg = <0x0b016000 0x30>; |
| 1334 |
#clock-cells = <0>; |
| 1335 |
clock-output-names = "apcs_hfpll"; |
| 1336 |
clocks = <&xo_board>; |
| 1337 |
clock-names = "xo"; |
| 1338 |
}; |
| 1339 |
|
| 1340 |
watchdog@b017000 { |
| 1341 |
compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt"; |
| 1342 |
reg = <0x0b017000 0x1000>; |
| 1343 |
clocks = <&sleep_clk>; |
| 1344 |
}; |
| 1345 |
|
| 1346 |
cpr: power-controller@b018000 { |
| 1347 |
compatible = "qcom,qcs404-cpr", "qcom,cpr"; |
| 1348 |
reg = <0x0b018000 0x1000>; |
| 1349 |
interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; |
| 1350 |
clocks = <&xo_board>; |
| 1351 |
clock-names = "ref"; |
| 1352 |
vdd-apc-supply = <&pms405_s3>; |
| 1353 |
#power-domain-cells = <0>; |
| 1354 |
operating-points-v2 = <&cpr_opp_table>; |
| 1355 |
acc-syscon = <&tcsr>; |
| 1356 |
|
| 1357 |
nvmem-cells = <&cpr_efuse_quot_offset1>, |
| 1358 |
<&cpr_efuse_quot_offset2>, |
| 1359 |
<&cpr_efuse_quot_offset3>, |
| 1360 |
<&cpr_efuse_init_voltage1>, |
| 1361 |
<&cpr_efuse_init_voltage2>, |
| 1362 |
<&cpr_efuse_init_voltage3>, |
| 1363 |
<&cpr_efuse_quot1>, |
| 1364 |
<&cpr_efuse_quot2>, |
| 1365 |
<&cpr_efuse_quot3>, |
| 1366 |
<&cpr_efuse_ring1>, |
| 1367 |
<&cpr_efuse_ring2>, |
| 1368 |
<&cpr_efuse_ring3>, |
| 1369 |
<&cpr_efuse_revision>; |
| 1370 |
nvmem-cell-names = "cpr_quotient_offset1", |
| 1371 |
"cpr_quotient_offset2", |
| 1372 |
"cpr_quotient_offset3", |
| 1373 |
"cpr_init_voltage1", |
| 1374 |
"cpr_init_voltage2", |
| 1375 |
"cpr_init_voltage3", |
| 1376 |
"cpr_quotient1", |
| 1377 |
"cpr_quotient2", |
| 1378 |
"cpr_quotient3", |
| 1379 |
"cpr_ring_osc1", |
| 1380 |
"cpr_ring_osc2", |
| 1381 |
"cpr_ring_osc3", |
| 1382 |
"cpr_fuse_revision"; |
| 1383 |
}; |
| 1384 |
|
| 1385 |
timer@b120000 { |
| 1386 |
#address-cells = <1>; |
| 1387 |
#size-cells = <1>; |
| 1388 |
ranges; |
| 1389 |
compatible = "arm,armv7-timer-mem"; |
| 1390 |
reg = <0x0b120000 0x1000>; |
| 1391 |
clock-frequency = <19200000>; |
| 1392 |
|
| 1393 |
frame@b121000 { |
| 1394 |
frame-number = <0>; |
| 1395 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 1396 |
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 1397 |
reg = <0x0b121000 0x1000>, |
| 1398 |
<0x0b122000 0x1000>; |
| 1399 |
}; |
| 1400 |
|
| 1401 |
frame@b123000 { |
| 1402 |
frame-number = <1>; |
| 1403 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 1404 |
reg = <0x0b123000 0x1000>; |
| 1405 |
status = "disabled"; |
| 1406 |
}; |
| 1407 |
|
| 1408 |
frame@b124000 { |
| 1409 |
frame-number = <2>; |
| 1410 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 1411 |
reg = <0x0b124000 0x1000>; |
| 1412 |
status = "disabled"; |
| 1413 |
}; |
| 1414 |
|
| 1415 |
frame@b125000 { |
| 1416 |
frame-number = <3>; |
| 1417 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 1418 |
reg = <0x0b125000 0x1000>; |
| 1419 |
status = "disabled"; |
| 1420 |
}; |
| 1421 |
|
| 1422 |
frame@b126000 { |
| 1423 |
frame-number = <4>; |
| 1424 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 1425 |
reg = <0x0b126000 0x1000>; |
| 1426 |
status = "disabled"; |
| 1427 |
}; |
| 1428 |
|
| 1429 |
frame@b127000 { |
| 1430 |
frame-number = <5>; |
| 1431 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 1432 |
reg = <0xb127000 0x1000>; |
| 1433 |
status = "disabled"; |
| 1434 |
}; |
| 1435 |
|
| 1436 |
frame@b128000 { |
| 1437 |
frame-number = <6>; |
| 1438 |
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 1439 |
reg = <0x0b128000 0x1000>; |
| 1440 |
status = "disabled"; |
| 1441 |
}; |
| 1442 |
}; |
| 1443 |
|
| 1444 |
remoteproc_adsp: remoteproc@c700000 { |
| 1445 |
compatible = "qcom,qcs404-adsp-pas"; |
| 1446 |
reg = <0x0c700000 0x4040>; |
| 1447 |
|
| 1448 |
interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, |
| 1449 |
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| 1450 |
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| 1451 |
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| 1452 |
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| 1453 |
interrupt-names = "wdog", "fatal", "ready", |
| 1454 |
"handover", "stop-ack"; |
| 1455 |
|
| 1456 |
clocks = <&xo_board>; |
| 1457 |
clock-names = "xo"; |
| 1458 |
|
| 1459 |
memory-region = <&adsp_fw_mem>; |
| 1460 |
|
| 1461 |
qcom,smem-states = <&adsp_smp2p_out 0>; |
| 1462 |
qcom,smem-state-names = "stop"; |
| 1463 |
|
| 1464 |
status = "disabled"; |
| 1465 |
|
| 1466 |
glink-edge { |
| 1467 |
interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; |
| 1468 |
|
| 1469 |
qcom,remote-pid = <2>; |
| 1470 |
mboxes = <&apcs_glb 8>; |
| 1471 |
|
| 1472 |
label = "adsp"; |
| 1473 |
}; |
| 1474 |
}; |
| 1475 |
|
| 1476 |
pcie: pcie@10000000 { |
| 1477 |
compatible = "qcom,pcie-qcs404"; |
| 1478 |
reg = <0x10000000 0xf1d>, |
| 1479 |
<0x10000f20 0xa8>, |
| 1480 |
<0x07780000 0x2000>, |
| 1481 |
<0x10001000 0x2000>; |
| 1482 |
reg-names = "dbi", "elbi", "parf", "config"; |
| 1483 |
device_type = "pci"; |
| 1484 |
linux,pci-domain = <0>; |
| 1485 |
bus-range = <0x00 0xff>; |
| 1486 |
num-lanes = <1>; |
| 1487 |
#address-cells = <3>; |
| 1488 |
#size-cells = <2>; |
| 1489 |
|
| 1490 |
ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */ |
| 1491 |
<0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */ |
| 1492 |
|
| 1493 |
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; |
| 1494 |
interrupt-names = "msi"; |
| 1495 |
#interrupt-cells = <1>; |
| 1496 |
interrupt-map-mask = <0 0 0 0x7>; |
| 1497 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ |
| 1498 |
<0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ |
| 1499 |
<0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ |
| 1500 |
<0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ |
| 1501 |
clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| 1502 |
<&gcc GCC_PCIE_0_AUX_CLK>, |
| 1503 |
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>, |
| 1504 |
<&gcc GCC_PCIE_0_SLV_AXI_CLK>; |
| 1505 |
clock-names = "iface", "aux", "master_bus", "slave_bus"; |
| 1506 |
|
| 1507 |
resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>, |
| 1508 |
<&gcc GCC_PCIE_0_AXI_SLAVE_ARES>, |
| 1509 |
<&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>, |
| 1510 |
<&gcc GCC_PCIE_0_CORE_STICKY_ARES>, |
| 1511 |
<&gcc GCC_PCIE_0_BCR>, |
| 1512 |
<&gcc GCC_PCIE_0_AHB_ARES>; |
| 1513 |
reset-names = "axi_m", |
| 1514 |
"axi_s", |
| 1515 |
"axi_m_sticky", |
| 1516 |
"pipe_sticky", |
| 1517 |
"pwr", |
| 1518 |
"ahb"; |
| 1519 |
|
| 1520 |
phys = <&pcie_phy>; |
| 1521 |
phy-names = "pciephy"; |
| 1522 |
|
| 1523 |
status = "disabled"; |
| 1524 |
|
| 1525 |
pcie@0 { |
| 1526 |
device_type = "pci"; |
| 1527 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 1528 |
bus-range = <0x01 0xff>; |
| 1529 |
|
| 1530 |
#address-cells = <3>; |
| 1531 |
#size-cells = <2>; |
| 1532 |
ranges; |
| 1533 |
}; |
| 1534 |
}; |
| 1535 |
}; |
| 1536 |
|
| 1537 |
timer { |
| 1538 |
compatible = "arm,armv8-timer"; |
| 1539 |
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 1540 |
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 1541 |
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 1542 |
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| 1543 |
}; |
| 1544 |
|
| 1545 |
smp2p-adsp { |
| 1546 |
compatible = "qcom,smp2p"; |
| 1547 |
qcom,smem = <443>, <429>; |
| 1548 |
interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; |
| 1549 |
mboxes = <&apcs_glb 10>; |
| 1550 |
qcom,local-pid = <0>; |
| 1551 |
qcom,remote-pid = <2>; |
| 1552 |
|
| 1553 |
adsp_smp2p_out: master-kernel { |
| 1554 |
qcom,entry-name = "master-kernel"; |
| 1555 |
#qcom,smem-state-cells = <1>; |
| 1556 |
}; |
| 1557 |
|
| 1558 |
adsp_smp2p_in: slave-kernel { |
| 1559 |
qcom,entry-name = "slave-kernel"; |
| 1560 |
interrupt-controller; |
| 1561 |
#interrupt-cells = <2>; |
| 1562 |
}; |
| 1563 |
}; |
| 1564 |
|
| 1565 |
smp2p-cdsp { |
| 1566 |
compatible = "qcom,smp2p"; |
| 1567 |
qcom,smem = <94>, <432>; |
| 1568 |
interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; |
| 1569 |
mboxes = <&apcs_glb 14>; |
| 1570 |
qcom,local-pid = <0>; |
| 1571 |
qcom,remote-pid = <5>; |
| 1572 |
|
| 1573 |
cdsp_smp2p_out: master-kernel { |
| 1574 |
qcom,entry-name = "master-kernel"; |
| 1575 |
#qcom,smem-state-cells = <1>; |
| 1576 |
}; |
| 1577 |
|
| 1578 |
cdsp_smp2p_in: slave-kernel { |
| 1579 |
qcom,entry-name = "slave-kernel"; |
| 1580 |
interrupt-controller; |
| 1581 |
#interrupt-cells = <2>; |
| 1582 |
}; |
| 1583 |
}; |
| 1584 |
|
| 1585 |
smp2p-wcss { |
| 1586 |
compatible = "qcom,smp2p"; |
| 1587 |
qcom,smem = <435>, <428>; |
| 1588 |
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; |
| 1589 |
mboxes = <&apcs_glb 18>; |
| 1590 |
qcom,local-pid = <0>; |
| 1591 |
qcom,remote-pid = <1>; |
| 1592 |
|
| 1593 |
wcss_smp2p_out: master-kernel { |
| 1594 |
qcom,entry-name = "master-kernel"; |
| 1595 |
#qcom,smem-state-cells = <1>; |
| 1596 |
}; |
| 1597 |
|
| 1598 |
wcss_smp2p_in: slave-kernel { |
| 1599 |
qcom,entry-name = "slave-kernel"; |
| 1600 |
interrupt-controller; |
| 1601 |
#interrupt-cells = <2>; |
| 1602 |
}; |
| 1603 |
}; |
| 1604 |
|
| 1605 |
thermal-zones { |
| 1606 |
aoss-thermal { |
| 1607 |
polling-delay-passive = <250>; |
| 1608 |
|
| 1609 |
thermal-sensors = <&tsens 0>; |
| 1610 |
|
| 1611 |
trips { |
| 1612 |
aoss_alert0: trip-point0 { |
| 1613 |
temperature = <105000>; |
| 1614 |
hysteresis = <2000>; |
| 1615 |
type = "hot"; |
| 1616 |
}; |
| 1617 |
}; |
| 1618 |
}; |
| 1619 |
|
| 1620 |
q6-hvx-thermal { |
| 1621 |
polling-delay-passive = <250>; |
| 1622 |
|
| 1623 |
thermal-sensors = <&tsens 1>; |
| 1624 |
|
| 1625 |
trips { |
| 1626 |
q6_hvx_alert0: trip-point0 { |
| 1627 |
temperature = <105000>; |
| 1628 |
hysteresis = <2000>; |
| 1629 |
type = "hot"; |
| 1630 |
}; |
| 1631 |
}; |
| 1632 |
}; |
| 1633 |
|
| 1634 |
lpass-thermal { |
| 1635 |
polling-delay-passive = <250>; |
| 1636 |
|
| 1637 |
thermal-sensors = <&tsens 2>; |
| 1638 |
|
| 1639 |
trips { |
| 1640 |
lpass_alert0: trip-point0 { |
| 1641 |
temperature = <105000>; |
| 1642 |
hysteresis = <2000>; |
| 1643 |
type = "hot"; |
| 1644 |
}; |
| 1645 |
}; |
| 1646 |
}; |
| 1647 |
|
| 1648 |
wlan-thermal { |
| 1649 |
polling-delay-passive = <250>; |
| 1650 |
|
| 1651 |
thermal-sensors = <&tsens 3>; |
| 1652 |
|
| 1653 |
trips { |
| 1654 |
wlan_alert0: trip-point0 { |
| 1655 |
temperature = <105000>; |
| 1656 |
hysteresis = <2000>; |
| 1657 |
type = "hot"; |
| 1658 |
}; |
| 1659 |
}; |
| 1660 |
}; |
| 1661 |
|
| 1662 |
cluster-thermal { |
| 1663 |
polling-delay-passive = <250>; |
| 1664 |
|
| 1665 |
thermal-sensors = <&tsens 4>; |
| 1666 |
|
| 1667 |
trips { |
| 1668 |
cluster_alert0: trip-point0 { |
| 1669 |
temperature = <95000>; |
| 1670 |
hysteresis = <2000>; |
| 1671 |
type = "hot"; |
| 1672 |
}; |
| 1673 |
cluster_alert1: trip-point1 { |
| 1674 |
temperature = <105000>; |
| 1675 |
hysteresis = <2000>; |
| 1676 |
type = "passive"; |
| 1677 |
}; |
| 1678 |
cluster_crit: cluster-crit { |
| 1679 |
temperature = <120000>; |
| 1680 |
hysteresis = <2000>; |
| 1681 |
type = "critical"; |
| 1682 |
}; |
| 1683 |
}; |
| 1684 |
cooling-maps { |
| 1685 |
map0 { |
| 1686 |
trip = <&cluster_alert1>; |
| 1687 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1688 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1689 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1690 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 1691 |
}; |
| 1692 |
}; |
| 1693 |
}; |
| 1694 |
|
| 1695 |
cpu0-thermal { |
| 1696 |
polling-delay-passive = <250>; |
| 1697 |
|
| 1698 |
thermal-sensors = <&tsens 5>; |
| 1699 |
|
| 1700 |
trips { |
| 1701 |
cpu0_alert0: trip-point0 { |
| 1702 |
temperature = <95000>; |
| 1703 |
hysteresis = <2000>; |
| 1704 |
type = "hot"; |
| 1705 |
}; |
| 1706 |
cpu0_alert1: trip-point1 { |
| 1707 |
temperature = <105000>; |
| 1708 |
hysteresis = <2000>; |
| 1709 |
type = "passive"; |
| 1710 |
}; |
| 1711 |
cpu0_crit: cpu-crit { |
| 1712 |
temperature = <120000>; |
| 1713 |
hysteresis = <2000>; |
| 1714 |
type = "critical"; |
| 1715 |
}; |
| 1716 |
}; |
| 1717 |
cooling-maps { |
| 1718 |
map0 { |
| 1719 |
trip = <&cpu0_alert1>; |
| 1720 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1721 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1722 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1723 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 1724 |
}; |
| 1725 |
}; |
| 1726 |
}; |
| 1727 |
|
| 1728 |
cpu1-thermal { |
| 1729 |
polling-delay-passive = <250>; |
| 1730 |
|
| 1731 |
thermal-sensors = <&tsens 6>; |
| 1732 |
|
| 1733 |
trips { |
| 1734 |
cpu1_alert0: trip-point0 { |
| 1735 |
temperature = <95000>; |
| 1736 |
hysteresis = <2000>; |
| 1737 |
type = "hot"; |
| 1738 |
}; |
| 1739 |
cpu1_alert1: trip-point1 { |
| 1740 |
temperature = <105000>; |
| 1741 |
hysteresis = <2000>; |
| 1742 |
type = "passive"; |
| 1743 |
}; |
| 1744 |
cpu1_crit: cpu-crit { |
| 1745 |
temperature = <120000>; |
| 1746 |
hysteresis = <2000>; |
| 1747 |
type = "critical"; |
| 1748 |
}; |
| 1749 |
}; |
| 1750 |
cooling-maps { |
| 1751 |
map0 { |
| 1752 |
trip = <&cpu1_alert1>; |
| 1753 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1754 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1755 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1756 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 1757 |
}; |
| 1758 |
}; |
| 1759 |
}; |
| 1760 |
|
| 1761 |
cpu2-thermal { |
| 1762 |
polling-delay-passive = <250>; |
| 1763 |
|
| 1764 |
thermal-sensors = <&tsens 7>; |
| 1765 |
|
| 1766 |
trips { |
| 1767 |
cpu2_alert0: trip-point0 { |
| 1768 |
temperature = <95000>; |
| 1769 |
hysteresis = <2000>; |
| 1770 |
type = "hot"; |
| 1771 |
}; |
| 1772 |
cpu2_alert1: trip-point1 { |
| 1773 |
temperature = <105000>; |
| 1774 |
hysteresis = <2000>; |
| 1775 |
type = "passive"; |
| 1776 |
}; |
| 1777 |
cpu2_crit: cpu-crit { |
| 1778 |
temperature = <120000>; |
| 1779 |
hysteresis = <2000>; |
| 1780 |
type = "critical"; |
| 1781 |
}; |
| 1782 |
}; |
| 1783 |
cooling-maps { |
| 1784 |
map0 { |
| 1785 |
trip = <&cpu2_alert1>; |
| 1786 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1787 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1788 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1789 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 1790 |
}; |
| 1791 |
}; |
| 1792 |
}; |
| 1793 |
|
| 1794 |
cpu3-thermal { |
| 1795 |
polling-delay-passive = <250>; |
| 1796 |
|
| 1797 |
thermal-sensors = <&tsens 8>; |
| 1798 |
|
| 1799 |
trips { |
| 1800 |
cpu3_alert0: trip-point0 { |
| 1801 |
temperature = <95000>; |
| 1802 |
hysteresis = <2000>; |
| 1803 |
type = "hot"; |
| 1804 |
}; |
| 1805 |
cpu3_alert1: trip-point1 { |
| 1806 |
temperature = <105000>; |
| 1807 |
hysteresis = <2000>; |
| 1808 |
type = "passive"; |
| 1809 |
}; |
| 1810 |
cpu3_crit: cpu-crit { |
| 1811 |
temperature = <120000>; |
| 1812 |
hysteresis = <2000>; |
| 1813 |
type = "critical"; |
| 1814 |
}; |
| 1815 |
}; |
| 1816 |
cooling-maps { |
| 1817 |
map0 { |
| 1818 |
trip = <&cpu3_alert1>; |
| 1819 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1820 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1821 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1822 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 1823 |
}; |
| 1824 |
}; |
| 1825 |
}; |
| 1826 |
|
| 1827 |
gpu-thermal { |
| 1828 |
polling-delay-passive = <250>; |
| 1829 |
|
| 1830 |
thermal-sensors = <&tsens 9>; |
| 1831 |
|
| 1832 |
trips { |
| 1833 |
gpu_alert0: trip-point0 { |
| 1834 |
temperature = <95000>; |
| 1835 |
hysteresis = <2000>; |
| 1836 |
type = "hot"; |
| 1837 |
}; |
| 1838 |
}; |
| 1839 |
}; |
| 1840 |
}; |
| 1841 |
}; |