| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Copyright (c) 2018, Linaro Limited |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/gpio/gpio.h> |
| 7 |
#include "qcs404.dtsi" |
| 8 |
#include "pms405.dtsi" |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
aliases { |
| 14 |
serial0 = &blsp1_uart2; |
| 15 |
serial1 = &blsp1_uart3; |
| 16 |
}; |
| 17 |
|
| 18 |
chosen { |
| 19 |
stdout-path = "serial0"; |
| 20 |
}; |
| 21 |
|
| 22 |
vph_pwr: vph-pwr-regulator { |
| 23 |
compatible = "regulator-fixed"; |
| 24 |
regulator-name = "vph_pwr"; |
| 25 |
regulator-always-on; |
| 26 |
regulator-boot-on; |
| 27 |
}; |
| 28 |
|
| 29 |
vdd_ch0_3p3: |
| 30 |
vdd_esmps3_3p3: vdd-esmps3-3p3-regulator { |
| 31 |
compatible = "regulator-fixed"; |
| 32 |
regulator-name = "eSMPS3_3P3"; |
| 33 |
|
| 34 |
regulator-min-microvolt = <3300000>; |
| 35 |
regulator-max-microvolt = <3300000>; |
| 36 |
regulator-always-on; |
| 37 |
}; |
| 38 |
|
| 39 |
usb3_vbus_reg: regulator-usb3-vbus { |
| 40 |
compatible = "regulator-fixed"; |
| 41 |
regulator-name = "VBUS_BOOST_5V"; |
| 42 |
regulator-min-microvolt = <5000000>; |
| 43 |
regulator-max-microvolt = <5000000>; |
| 44 |
gpio = <&pms405_gpios 3 GPIO_ACTIVE_HIGH>; |
| 45 |
pinctrl-names = "default"; |
| 46 |
pinctrl-0 = <&usb_vbus_boost_pin>; |
| 47 |
vin-supply = <&vph_pwr>; |
| 48 |
enable-active-high; |
| 49 |
|
| 50 |
/* TODO: Drop this when introducing role switching */ |
| 51 |
regulator-always-on; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
&blsp1_uart3 { |
| 56 |
status = "okay"; |
| 57 |
|
| 58 |
bluetooth { |
| 59 |
compatible = "qcom,wcn3990-bt"; |
| 60 |
vddio-supply = <&vreg_l6_1p8>; |
| 61 |
vddxo-supply = <&vreg_l5_1p8>; |
| 62 |
vddrf-supply = <&vreg_l1_1p3>; |
| 63 |
vddch0-supply = <&vdd_ch0_3p3>; |
| 64 |
|
| 65 |
local-bd-address = [ 00 00 00 00 00 00 ]; |
| 66 |
|
| 67 |
max-speed = <3200000>; |
| 68 |
}; |
| 69 |
}; |
| 70 |
|
| 71 |
&blsp1_dma { |
| 72 |
qcom,controlled-remotely; |
| 73 |
}; |
| 74 |
|
| 75 |
&blsp2_dma { |
| 76 |
qcom,controlled-remotely; |
| 77 |
}; |
| 78 |
|
| 79 |
&gcc { |
| 80 |
protected-clocks = <GCC_BIMC_CDSP_CLK>, |
| 81 |
<GCC_CDSP_CFG_AHB_CLK>, |
| 82 |
<GCC_CDSP_BIMC_CLK_SRC>, |
| 83 |
<GCC_CDSP_TBU_CLK>, |
| 84 |
<141>, /* GCC_WCSS_Q6_AHB_CLK */ |
| 85 |
<142>; /* GCC_WCSS_Q6_AXIM_CLK */ |
| 86 |
}; |
| 87 |
|
| 88 |
&pms405_spmi_regulators { |
| 89 |
vdd_s3-supply = <&vph_pwr>; |
| 90 |
|
| 91 |
pms405_s3: s3 { |
| 92 |
regulator-always-on; |
| 93 |
regulator-boot-on; |
| 94 |
regulator-name = "vdd_apc"; |
| 95 |
regulator-initial-mode = <1>; |
| 96 |
regulator-min-microvolt = <1048000>; |
| 97 |
regulator-max-microvolt = <1384000>; |
| 98 |
}; |
| 99 |
}; |
| 100 |
|
| 101 |
&pcie { |
| 102 |
status = "okay"; |
| 103 |
|
| 104 |
perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; |
| 105 |
|
| 106 |
pinctrl-names = "default"; |
| 107 |
pinctrl-0 = <&perst_state>; |
| 108 |
}; |
| 109 |
|
| 110 |
&pcie_phy { |
| 111 |
status = "okay"; |
| 112 |
|
| 113 |
vdda-vp-supply = <&vreg_l3_1p05>; |
| 114 |
vdda-vph-supply = <&vreg_l5_1p8>; |
| 115 |
}; |
| 116 |
|
| 117 |
&remoteproc_adsp { |
| 118 |
status = "okay"; |
| 119 |
}; |
| 120 |
|
| 121 |
&remoteproc_cdsp { |
| 122 |
status = "okay"; |
| 123 |
}; |
| 124 |
|
| 125 |
&remoteproc_wcss { |
| 126 |
status = "okay"; |
| 127 |
}; |
| 128 |
|
| 129 |
&rpm_requests { |
| 130 |
regulators { |
| 131 |
compatible = "qcom,rpm-pms405-regulators"; |
| 132 |
|
| 133 |
vdd_s1-supply = <&vph_pwr>; |
| 134 |
vdd_s2-supply = <&vph_pwr>; |
| 135 |
vdd_s3-supply = <&vph_pwr>; |
| 136 |
vdd_s4-supply = <&vph_pwr>; |
| 137 |
vdd_s5-supply = <&vph_pwr>; |
| 138 |
vdd_l1_l2-supply = <&vreg_s5_1p35>; |
| 139 |
vdd_l3_l8-supply = <&vreg_s5_1p35>; |
| 140 |
vdd_l4-supply = <&vreg_s5_1p35>; |
| 141 |
vdd_l5_l6-supply = <&vreg_s4_1p8>; |
| 142 |
vdd_l7-supply = <&vph_pwr>; |
| 143 |
vdd_l9-supply = <&vreg_s5_1p35>; |
| 144 |
vdd_l10_l11_l12_l13-supply = <&vph_pwr>; |
| 145 |
|
| 146 |
vreg_s4_1p8: s4 { |
| 147 |
regulator-min-microvolt = <1728000>; |
| 148 |
regulator-max-microvolt = <1920000>; |
| 149 |
}; |
| 150 |
|
| 151 |
vreg_s5_1p35: s5 { |
| 152 |
regulator-min-microvolt = <1352000>; |
| 153 |
regulator-max-microvolt = <1352000>; |
| 154 |
}; |
| 155 |
|
| 156 |
vreg_l1_1p3: l1 { |
| 157 |
regulator-min-microvolt = <1240000>; |
| 158 |
regulator-max-microvolt = <1352000>; |
| 159 |
}; |
| 160 |
|
| 161 |
vreg_l2_1p275: l2 { |
| 162 |
regulator-min-microvolt = <1048000>; |
| 163 |
regulator-max-microvolt = <1280000>; |
| 164 |
}; |
| 165 |
|
| 166 |
vreg_l3_1p05: l3 { |
| 167 |
regulator-min-microvolt = <1048000>; |
| 168 |
regulator-max-microvolt = <1160000>; |
| 169 |
}; |
| 170 |
|
| 171 |
vreg_l4_1p2: l4 { |
| 172 |
regulator-min-microvolt = <1144000>; |
| 173 |
regulator-max-microvolt = <1256000>; |
| 174 |
}; |
| 175 |
|
| 176 |
vreg_l5_1p8: l5 { |
| 177 |
regulator-min-microvolt = <1800000>; |
| 178 |
regulator-max-microvolt = <1800000>; |
| 179 |
}; |
| 180 |
|
| 181 |
vreg_l6_1p8: l6 { |
| 182 |
regulator-min-microvolt = <1800000>; |
| 183 |
regulator-max-microvolt = <1800000>; |
| 184 |
regulator-always-on; |
| 185 |
}; |
| 186 |
|
| 187 |
vreg_l7_1p8: l7 { |
| 188 |
regulator-min-microvolt = <1616000>; |
| 189 |
regulator-max-microvolt = <3000000>; |
| 190 |
}; |
| 191 |
|
| 192 |
vreg_l8_1p2: l8 { |
| 193 |
regulator-min-microvolt = <1136000>; |
| 194 |
regulator-max-microvolt = <1352000>; |
| 195 |
}; |
| 196 |
|
| 197 |
vreg_l10_3p3: l10 { |
| 198 |
regulator-min-microvolt = <2936000>; |
| 199 |
regulator-max-microvolt = <3088000>; |
| 200 |
}; |
| 201 |
|
| 202 |
vreg_l11_sdc2: l11 { |
| 203 |
regulator-min-microvolt = <2696000>; |
| 204 |
regulator-max-microvolt = <3304000>; |
| 205 |
}; |
| 206 |
|
| 207 |
vreg_l12_3p3: l12 { |
| 208 |
regulator-min-microvolt = <3050000>; |
| 209 |
regulator-max-microvolt = <3300000>; |
| 210 |
}; |
| 211 |
|
| 212 |
vreg_l13_3p3: l13 { |
| 213 |
regulator-min-microvolt = <3000000>; |
| 214 |
regulator-max-microvolt = <3300000>; |
| 215 |
}; |
| 216 |
}; |
| 217 |
}; |
| 218 |
|
| 219 |
&sdcc1 { |
| 220 |
status = "okay"; |
| 221 |
|
| 222 |
supports-cqe; |
| 223 |
mmc-ddr-1_8v; |
| 224 |
mmc-hs400-1_8v; |
| 225 |
bus-width = <8>; |
| 226 |
non-removable; |
| 227 |
|
| 228 |
pinctrl-names = "default", "sleep"; |
| 229 |
pinctrl-0 = <&sdc1_on>; |
| 230 |
pinctrl-1 = <&sdc1_off>; |
| 231 |
}; |
| 232 |
|
| 233 |
&tlmm { |
| 234 |
perst_state: perst-state { |
| 235 |
pins = "gpio43"; |
| 236 |
function = "gpio"; |
| 237 |
|
| 238 |
drive-strength = <2>; |
| 239 |
bias-disable; |
| 240 |
output-low; |
| 241 |
}; |
| 242 |
|
| 243 |
sdc1_on: sdc1-on-state { |
| 244 |
clk-pins { |
| 245 |
pins = "sdc1_clk"; |
| 246 |
bias-disable; |
| 247 |
drive-strength = <16>; |
| 248 |
}; |
| 249 |
|
| 250 |
cmd-pins { |
| 251 |
pins = "sdc1_cmd"; |
| 252 |
bias-pull-up; |
| 253 |
drive-strength = <10>; |
| 254 |
}; |
| 255 |
|
| 256 |
data-pins { |
| 257 |
pins = "sdc1_data"; |
| 258 |
bias-pull-up; |
| 259 |
drive-strength = <10>; |
| 260 |
}; |
| 261 |
|
| 262 |
rclk-pins { |
| 263 |
pins = "sdc1_rclk"; |
| 264 |
bias-pull-down; |
| 265 |
}; |
| 266 |
}; |
| 267 |
|
| 268 |
sdc1_off: sdc1-off-state { |
| 269 |
clk-pins { |
| 270 |
pins = "sdc1_clk"; |
| 271 |
bias-disable; |
| 272 |
drive-strength = <2>; |
| 273 |
}; |
| 274 |
|
| 275 |
cmd-pins { |
| 276 |
pins = "sdc1_cmd"; |
| 277 |
bias-pull-up; |
| 278 |
drive-strength = <2>; |
| 279 |
}; |
| 280 |
|
| 281 |
data-pins { |
| 282 |
pins = "sdc1_data"; |
| 283 |
bias-pull-up; |
| 284 |
drive-strength = <2>; |
| 285 |
}; |
| 286 |
|
| 287 |
rclk-pins { |
| 288 |
pins = "sdc1_rclk"; |
| 289 |
bias-pull-down; |
| 290 |
}; |
| 291 |
}; |
| 292 |
|
| 293 |
usb3_id_pin: usb3-id-state { |
| 294 |
pins = "gpio116"; |
| 295 |
function = "gpio"; |
| 296 |
|
| 297 |
drive-strength = <2>; |
| 298 |
bias-pull-up; |
| 299 |
}; |
| 300 |
}; |
| 301 |
|
| 302 |
&pms405_gpios { |
| 303 |
usb_vbus_boost_pin: usb-vbus-boost-state { |
| 304 |
pinconf { |
| 305 |
pins = "gpio3"; |
| 306 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 307 |
output-low; |
| 308 |
power-source = <1>; |
| 309 |
}; |
| 310 |
}; |
| 311 |
usb3_vbus_pin: usb3-vbus-state { |
| 312 |
pinconf { |
| 313 |
pins = "gpio12"; |
| 314 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 315 |
input-enable; |
| 316 |
bias-pull-down; |
| 317 |
power-source = <1>; |
| 318 |
}; |
| 319 |
}; |
| 320 |
}; |
| 321 |
|
| 322 |
&usb2 { |
| 323 |
status = "okay"; |
| 324 |
}; |
| 325 |
|
| 326 |
&usb2_phy_sec { |
| 327 |
vdd-supply = <&vreg_l4_1p2>; |
| 328 |
vdda1p8-supply = <&vreg_l5_1p8>; |
| 329 |
vdda3p3-supply = <&vreg_l12_3p3>; |
| 330 |
status = "okay"; |
| 331 |
}; |
| 332 |
|
| 333 |
&usb3 { |
| 334 |
status = "okay"; |
| 335 |
|
| 336 |
}; |
| 337 |
|
| 338 |
&usb3_dwc3 { |
| 339 |
dr_mode = "host"; |
| 340 |
}; |
| 341 |
|
| 342 |
&usb2_phy_prim { |
| 343 |
vdd-supply = <&vreg_l4_1p2>; |
| 344 |
vdda1p8-supply = <&vreg_l5_1p8>; |
| 345 |
vdda3p3-supply = <&vreg_l12_3p3>; |
| 346 |
status = "okay"; |
| 347 |
}; |
| 348 |
|
| 349 |
&usb3_phy { |
| 350 |
vdd-supply = <&vreg_l3_1p05>; |
| 351 |
vdda1p8-supply = <&vreg_l5_1p8>; |
| 352 |
status = "okay"; |
| 353 |
}; |
| 354 |
|
| 355 |
&wifi { |
| 356 |
status = "okay"; |
| 357 |
vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>; |
| 358 |
vdd-1.8-xo-supply = <&vreg_l5_1p8>; |
| 359 |
vdd-1.3-rfa-supply = <&vreg_l1_1p3>; |
| 360 |
}; |
| 361 |
|
| 362 |
/* PINCTRL - additions to nodes defined in qcs404.dtsi */ |
| 363 |
|
| 364 |
&blsp1_uart2_default { |
| 365 |
rx-pins { |
| 366 |
drive-strength = <2>; |
| 367 |
bias-disable; |
| 368 |
}; |
| 369 |
|
| 370 |
tx-pins { |
| 371 |
drive-strength = <2>; |
| 372 |
bias-disable; |
| 373 |
}; |
| 374 |
}; |
| 375 |
|
| 376 |
&blsp1_uart3_default { |
| 377 |
cts-pins { |
| 378 |
bias-disable; |
| 379 |
}; |
| 380 |
|
| 381 |
rts-tx-pins { |
| 382 |
drive-strength = <2>; |
| 383 |
bias-disable; |
| 384 |
}; |
| 385 |
|
| 386 |
rx-pins { |
| 387 |
bias-pull-up; |
| 388 |
}; |
| 389 |
}; |