| 1 |
// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause |
| 2 |
|
| 3 |
#include <dt-bindings/spmi/spmi.h> |
| 4 |
#include <dt-bindings/iio/qcom,spmi-vadc.h> |
| 5 |
|
| 6 |
&spmi_bus { |
| 7 |
pmic@0 { |
| 8 |
compatible = "qcom,pmp8074", "qcom,spmi-pmic"; |
| 9 |
reg = <0x0 SPMI_USID>; |
| 10 |
#address-cells = <1>; |
| 11 |
#size-cells = <0>; |
| 12 |
|
| 13 |
pmp8074_adc: adc@3100 { |
| 14 |
compatible = "qcom,spmi-adc-rev2"; |
| 15 |
reg = <0x3100>; |
| 16 |
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; |
| 17 |
#address-cells = <1>; |
| 18 |
#size-cells = <0>; |
| 19 |
#io-channel-cells = <1>; |
| 20 |
|
| 21 |
channel@0 { |
| 22 |
reg = <ADC5_REF_GND>; |
| 23 |
qcom,pre-scaling = <1 1>; |
| 24 |
label = "ref_gnd"; |
| 25 |
}; |
| 26 |
|
| 27 |
channel@1 { |
| 28 |
reg = <ADC5_1P25VREF>; |
| 29 |
qcom,pre-scaling = <1 1>; |
| 30 |
label = "vref_1p25"; |
| 31 |
}; |
| 32 |
|
| 33 |
channel@2 { |
| 34 |
reg = <ADC5_VREF_VADC>; |
| 35 |
qcom,pre-scaling = <1 1>; |
| 36 |
label = "vref_vadc"; |
| 37 |
}; |
| 38 |
|
| 39 |
channel@6 { |
| 40 |
reg = <ADC5_DIE_TEMP>; |
| 41 |
qcom,pre-scaling = <1 1>; |
| 42 |
label = "pmic_die"; |
| 43 |
}; |
| 44 |
|
| 45 |
channel@76 { |
| 46 |
reg = <ADC5_XO_THERM_100K_PU>; |
| 47 |
qcom,ratiometric; |
| 48 |
qcom,hw-settle-time = <200>; |
| 49 |
qcom,pre-scaling = <1 1>; |
| 50 |
label = "xo_therm"; |
| 51 |
}; |
| 52 |
|
| 53 |
channel@77 { |
| 54 |
reg = <ADC5_AMUX_THM1_100K_PU>; |
| 55 |
qcom,ratiometric; |
| 56 |
qcom,hw-settle-time = <200>; |
| 57 |
qcom,pre-scaling = <1 1>; |
| 58 |
label = "pa_therm1"; |
| 59 |
}; |
| 60 |
|
| 61 |
channel@78 { |
| 62 |
reg = <ADC5_AMUX_THM2_100K_PU>; |
| 63 |
qcom,ratiometric; |
| 64 |
qcom,hw-settle-time = <200>; |
| 65 |
qcom,pre-scaling = <1 1>; |
| 66 |
label = "pa_therm2"; |
| 67 |
}; |
| 68 |
|
| 69 |
channel@79 { |
| 70 |
reg = <ADC5_AMUX_THM3_100K_PU>; |
| 71 |
qcom,ratiometric; |
| 72 |
qcom,hw-settle-time = <200>; |
| 73 |
qcom,pre-scaling = <1 1>; |
| 74 |
label = "pa_therm3"; |
| 75 |
}; |
| 76 |
|
| 77 |
channel@131 { |
| 78 |
reg = <ADC5_VPH_PWR>; |
| 79 |
qcom,pre-scaling = <1 3>; |
| 80 |
label = "vph_pwr"; |
| 81 |
}; |
| 82 |
}; |
| 83 |
|
| 84 |
pmp8074_rtc: rtc@6000 { |
| 85 |
compatible = "qcom,pm8941-rtc"; |
| 86 |
reg = <0x6000>, <0x6100>; |
| 87 |
reg-names = "rtc", "alarm"; |
| 88 |
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; |
| 89 |
allow-set-time; |
| 90 |
status = "disabled"; |
| 91 |
}; |
| 92 |
|
| 93 |
pmp8074_gpios: gpio@c000 { |
| 94 |
compatible = "qcom,pmp8074-gpio", "qcom,spmi-gpio"; |
| 95 |
reg = <0xc000>; |
| 96 |
gpio-controller; |
| 97 |
#gpio-cells = <2>; |
| 98 |
gpio-ranges = <&pmp8074_gpios 0 0 12>; |
| 99 |
interrupt-controller; |
| 100 |
#interrupt-cells = <2>; |
| 101 |
}; |
| 102 |
}; |
| 103 |
|
| 104 |
pmic@1 { |
| 105 |
compatible = "qcom,pmp8074", "qcom,spmi-pmic"; |
| 106 |
reg = <0x1 SPMI_USID>; |
| 107 |
|
| 108 |
regulators { |
| 109 |
compatible = "qcom,pmp8074-regulators"; |
| 110 |
|
| 111 |
s3: s3 { |
| 112 |
regulator-name = "vdd_s3"; |
| 113 |
regulator-min-microvolt = <592000>; |
| 114 |
regulator-max-microvolt = <1064000>; |
| 115 |
regulator-always-on; |
| 116 |
regulator-boot-on; |
| 117 |
}; |
| 118 |
|
| 119 |
s4: s4 { |
| 120 |
regulator-name = "vdd_s4"; |
| 121 |
regulator-min-microvolt = <712000>; |
| 122 |
regulator-max-microvolt = <992000>; |
| 123 |
regulator-always-on; |
| 124 |
regulator-boot-on; |
| 125 |
}; |
| 126 |
|
| 127 |
l11: l11 { |
| 128 |
regulator-name = "l11"; |
| 129 |
regulator-min-microvolt = <1800000>; |
| 130 |
regulator-max-microvolt = <3300000>; |
| 131 |
}; |
| 132 |
}; |
| 133 |
}; |
| 134 |
}; |