| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 3 |
#include <dt-bindings/spmi/spmi.h> |
| 4 |
|
| 5 |
&spmi_bus { |
| 6 |
pmi8998_lsid0: pmic@2 { |
| 7 |
compatible = "qcom,pmi8998", "qcom,spmi-pmic"; |
| 8 |
reg = <0x2 SPMI_USID>; |
| 9 |
#address-cells = <1>; |
| 10 |
#size-cells = <0>; |
| 11 |
|
| 12 |
pmi8998_charger: charger@1000 { |
| 13 |
compatible = "qcom,pmi8998-charger"; |
| 14 |
reg = <0x1000>; |
| 15 |
|
| 16 |
interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, |
| 17 |
<0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, |
| 18 |
<0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>, |
| 19 |
<0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>; |
| 20 |
interrupt-names = "usb-plugin", |
| 21 |
"bat-ov", |
| 22 |
"wdog-bark", |
| 23 |
"usbin-icl-change"; |
| 24 |
|
| 25 |
io-channels = <&pmi8998_rradc 3>, |
| 26 |
<&pmi8998_rradc 4>; |
| 27 |
io-channel-names = "usbin_i", "usbin_v"; |
| 28 |
|
| 29 |
status = "disabled"; |
| 30 |
}; |
| 31 |
|
| 32 |
pmi8998_gpios: gpio@c000 { |
| 33 |
compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; |
| 34 |
reg = <0xc000>; |
| 35 |
gpio-controller; |
| 36 |
gpio-ranges = <&pmi8998_gpios 0 0 14>; |
| 37 |
#gpio-cells = <2>; |
| 38 |
interrupt-controller; |
| 39 |
#interrupt-cells = <2>; |
| 40 |
}; |
| 41 |
|
| 42 |
pmi8998_rradc: adc@4500 { |
| 43 |
compatible = "qcom,pmi8998-rradc"; |
| 44 |
reg = <0x4500>; |
| 45 |
#io-channel-cells = <1>; |
| 46 |
}; |
| 47 |
}; |
| 48 |
|
| 49 |
pmi8998_lsid1: pmic@3 { |
| 50 |
compatible = "qcom,pmi8998", "qcom,spmi-pmic"; |
| 51 |
reg = <0x3 SPMI_USID>; |
| 52 |
#address-cells = <1>; |
| 53 |
#size-cells = <0>; |
| 54 |
|
| 55 |
labibb { |
| 56 |
compatible = "qcom,pmi8998-lab-ibb"; |
| 57 |
|
| 58 |
ibb: ibb { |
| 59 |
interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>, |
| 60 |
<0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>; |
| 61 |
interrupt-names = "sc-err", "ocp"; |
| 62 |
}; |
| 63 |
|
| 64 |
lab: lab { |
| 65 |
interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>, |
| 66 |
<0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>; |
| 67 |
interrupt-names = "sc-err", "ocp"; |
| 68 |
}; |
| 69 |
}; |
| 70 |
|
| 71 |
pmi8998_lpg: pwm { |
| 72 |
compatible = "qcom,pmi8998-lpg"; |
| 73 |
|
| 74 |
#address-cells = <1>; |
| 75 |
#size-cells = <0>; |
| 76 |
#pwm-cells = <2>; |
| 77 |
|
| 78 |
status = "disabled"; |
| 79 |
}; |
| 80 |
|
| 81 |
pmi8998_flash: led-controller@d300 { |
| 82 |
compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led"; |
| 83 |
reg = <0xd300>; |
| 84 |
status = "disabled"; |
| 85 |
}; |
| 86 |
|
| 87 |
pmi8998_wled: leds@d800 { |
| 88 |
compatible = "qcom,pmi8998-wled"; |
| 89 |
reg = <0xd800>, <0xd900>; |
| 90 |
interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, |
| 91 |
<0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; |
| 92 |
interrupt-names = "ovp", "short"; |
| 93 |
label = "backlight"; |
| 94 |
|
| 95 |
status = "disabled"; |
| 96 |
}; |
| 97 |
}; |
| 98 |
}; |