| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (C) 2023 Luca Weiss <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/iio/qcom,spmi-vadc.h> |
| 7 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 8 |
#include <dt-bindings/spmi/spmi.h> |
| 9 |
|
| 10 |
/ { |
| 11 |
thermal-zones { |
| 12 |
pmi632-thermal { |
| 13 |
polling-delay-passive = <100>; |
| 14 |
|
| 15 |
thermal-sensors = <&pmi632_temp>; |
| 16 |
|
| 17 |
trips { |
| 18 |
trip0 { |
| 19 |
temperature = <95000>; |
| 20 |
hysteresis = <0>; |
| 21 |
type = "passive"; |
| 22 |
}; |
| 23 |
|
| 24 |
trip1 { |
| 25 |
temperature = <115000>; |
| 26 |
hysteresis = <0>; |
| 27 |
type = "hot"; |
| 28 |
}; |
| 29 |
|
| 30 |
trip2 { |
| 31 |
temperature = <125000>; |
| 32 |
hysteresis = <0>; |
| 33 |
type = "critical"; |
| 34 |
}; |
| 35 |
}; |
| 36 |
}; |
| 37 |
}; |
| 38 |
}; |
| 39 |
|
| 40 |
&spmi_bus { |
| 41 |
pmic@2 { |
| 42 |
compatible = "qcom,pmi632", "qcom,spmi-pmic"; |
| 43 |
reg = <0x2 SPMI_USID>; |
| 44 |
#address-cells = <1>; |
| 45 |
#size-cells = <0>; |
| 46 |
|
| 47 |
pmi632_vbus: usb-vbus-regulator@1100 { |
| 48 |
compatible = "qcom,pmi632-vbus-reg", "qcom,pm8150b-vbus-reg"; |
| 49 |
reg = <0x1100>; |
| 50 |
status = "disabled"; |
| 51 |
}; |
| 52 |
|
| 53 |
pmi632_typec: typec@1500 { |
| 54 |
compatible = "qcom,pmi632-typec"; |
| 55 |
reg = <0x1500>; |
| 56 |
interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>, |
| 57 |
<0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, |
| 58 |
<0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>, |
| 59 |
<0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, |
| 60 |
<0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>, |
| 61 |
<0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>, |
| 62 |
<0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, |
| 63 |
<0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>; |
| 64 |
interrupt-names = "or-rid-detect-change", |
| 65 |
"vpd-detect", |
| 66 |
"cc-state-change", |
| 67 |
"vconn-oc", |
| 68 |
"vbus-change", |
| 69 |
"attach-detach", |
| 70 |
"legacy-cable-detect", |
| 71 |
"try-snk-src-detect"; |
| 72 |
vdd-vbus-supply = <&pmi632_vbus>; |
| 73 |
|
| 74 |
status = "disabled"; |
| 75 |
}; |
| 76 |
|
| 77 |
pmi632_temp: temp-alarm@2400 { |
| 78 |
compatible = "qcom,spmi-temp-alarm"; |
| 79 |
reg = <0x2400>; |
| 80 |
interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 81 |
#thermal-sensor-cells = <0>; |
| 82 |
}; |
| 83 |
|
| 84 |
pmi632_adc: adc@3100 { |
| 85 |
compatible = "qcom,spmi-adc5"; |
| 86 |
reg = <0x3100>; |
| 87 |
#address-cells = <1>; |
| 88 |
#size-cells = <0>; |
| 89 |
#io-channel-cells = <1>; |
| 90 |
interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; |
| 91 |
|
| 92 |
channel@0 { |
| 93 |
reg = <ADC5_REF_GND>; |
| 94 |
qcom,pre-scaling = <1 1>; |
| 95 |
label = "ref_gnd"; |
| 96 |
}; |
| 97 |
|
| 98 |
channel@1 { |
| 99 |
reg = <ADC5_1P25VREF>; |
| 100 |
qcom,pre-scaling = <1 1>; |
| 101 |
label = "vref_1p25"; |
| 102 |
}; |
| 103 |
|
| 104 |
channel@6 { |
| 105 |
reg = <ADC5_DIE_TEMP>; |
| 106 |
qcom,pre-scaling = <1 1>; |
| 107 |
label = "die_temp"; |
| 108 |
}; |
| 109 |
|
| 110 |
channel@7 { |
| 111 |
reg = <ADC5_USB_IN_I>; |
| 112 |
qcom,pre-scaling = <1 1>; |
| 113 |
label = "usb_in_i_uv"; |
| 114 |
}; |
| 115 |
|
| 116 |
channel@8 { |
| 117 |
reg = <ADC5_USB_IN_V_16>; |
| 118 |
qcom,pre-scaling = <1 16>; |
| 119 |
label = "usb_in_v_div_16"; |
| 120 |
}; |
| 121 |
|
| 122 |
channel@9 { |
| 123 |
reg = <ADC5_CHG_TEMP>; |
| 124 |
qcom,pre-scaling = <1 1>; |
| 125 |
label = "chg_temp"; |
| 126 |
}; |
| 127 |
|
| 128 |
channel@4b { |
| 129 |
reg = <ADC5_BAT_ID_100K_PU>; |
| 130 |
qcom,hw-settle-time = <200>; |
| 131 |
qcom,pre-scaling = <1 1>; |
| 132 |
qcom,ratiometric; |
| 133 |
label = "bat_id"; |
| 134 |
}; |
| 135 |
|
| 136 |
channel@83 { |
| 137 |
reg = <ADC5_VPH_PWR>; |
| 138 |
qcom,pre-scaling = <1 3>; |
| 139 |
label = "vph_pwr"; |
| 140 |
}; |
| 141 |
|
| 142 |
channel@84 { |
| 143 |
reg = <ADC5_VBAT_SNS>; |
| 144 |
qcom,pre-scaling = <1 3>; |
| 145 |
label = "vbat_sns"; |
| 146 |
}; |
| 147 |
}; |
| 148 |
|
| 149 |
pmi632_adc_tm: adc-tm@3500 { |
| 150 |
compatible = "qcom,spmi-adc-tm5"; |
| 151 |
reg = <0x3500>; |
| 152 |
interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; |
| 153 |
#thermal-sensor-cells = <1>; |
| 154 |
#address-cells = <1>; |
| 155 |
#size-cells = <0>; |
| 156 |
status = "disabled"; |
| 157 |
}; |
| 158 |
|
| 159 |
pmi632_pbs_client3: pbs@7400 { |
| 160 |
compatible = "qcom,pmi632-pbs", "qcom,pbs"; |
| 161 |
reg = <0x7400>; |
| 162 |
}; |
| 163 |
|
| 164 |
pmi632_sdam_7: nvram@b600 { |
| 165 |
compatible = "qcom,spmi-sdam"; |
| 166 |
reg = <0xb600>; |
| 167 |
#address-cells = <1>; |
| 168 |
#size-cells = <1>; |
| 169 |
ranges = <0 0xb600 0x100>; |
| 170 |
}; |
| 171 |
|
| 172 |
pmi632_gpios: gpio@c000 { |
| 173 |
compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio"; |
| 174 |
reg = <0xc000>; |
| 175 |
gpio-controller; |
| 176 |
gpio-ranges = <&pmi632_gpios 0 0 8>; |
| 177 |
#gpio-cells = <2>; |
| 178 |
interrupt-controller; |
| 179 |
#interrupt-cells = <2>; |
| 180 |
}; |
| 181 |
}; |
| 182 |
|
| 183 |
pmic@3 { |
| 184 |
compatible = "qcom,pmi632", "qcom,spmi-pmic"; |
| 185 |
reg = <0x3 SPMI_USID>; |
| 186 |
#address-cells = <1>; |
| 187 |
#size-cells = <0>; |
| 188 |
|
| 189 |
pmi632_lpg: pwm { |
| 190 |
compatible = "qcom,pmi632-lpg"; |
| 191 |
|
| 192 |
nvmem = <&pmi632_sdam_7>; |
| 193 |
nvmem-names = "lpg_chan_sdam"; |
| 194 |
qcom,pbs = <&pmi632_pbs_client3>; |
| 195 |
|
| 196 |
#address-cells = <1>; |
| 197 |
#size-cells = <0>; |
| 198 |
#pwm-cells = <2>; |
| 199 |
|
| 200 |
status = "disabled"; |
| 201 |
}; |
| 202 |
|
| 203 |
pmi632_vib: vibrator@5700 { |
| 204 |
compatible = "qcom,pmi632-vib"; |
| 205 |
reg = <0x5700>; |
| 206 |
status = "disabled"; |
| 207 |
}; |
| 208 |
}; |
| 209 |
}; |