| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2022, AngeloGioacchino Del Regno |
| 4 |
* <[email protected]> |
| 5 |
* Copyright (c) 2022, Marijn Suijten <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/iio/qcom,spmi-vadc.h> |
| 9 |
#include <dt-bindings/input/linux-event-codes.h> |
| 10 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 11 |
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> |
| 12 |
#include <dt-bindings/spmi/spmi.h> |
| 13 |
|
| 14 |
&spmi_bus { |
| 15 |
pmic@0 { |
| 16 |
compatible = "qcom,pm8950", "qcom,spmi-pmic"; |
| 17 |
reg = <0x0 SPMI_USID>; |
| 18 |
#address-cells = <1>; |
| 19 |
#size-cells = <0>; |
| 20 |
|
| 21 |
pm8950_pon: pon@800 { |
| 22 |
compatible = "qcom,pm8916-pon"; |
| 23 |
reg = <0x0800>; |
| 24 |
mode-bootloader = <0x2>; |
| 25 |
mode-recovery = <0x1>; |
| 26 |
|
| 27 |
pwrkey { |
| 28 |
compatible = "qcom,pm8941-pwrkey"; |
| 29 |
interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; |
| 30 |
debounce = <15625>; |
| 31 |
bias-pull-up; |
| 32 |
linux,code = <KEY_POWER>; |
| 33 |
}; |
| 34 |
|
| 35 |
pm8950_resin: resin { |
| 36 |
compatible = "qcom,pm8941-resin"; |
| 37 |
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; |
| 38 |
debounce = <15625>; |
| 39 |
bias-pull-up; |
| 40 |
status = "disabled"; |
| 41 |
}; |
| 42 |
}; |
| 43 |
|
| 44 |
pm8950_temp: temp-alarm@2400 { |
| 45 |
compatible = "qcom,spmi-temp-alarm"; |
| 46 |
reg = <0x2400>; |
| 47 |
interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; |
| 48 |
io-channels = <&pm8950_vadc VADC_DIE_TEMP>; |
| 49 |
io-channel-names = "thermal"; |
| 50 |
#thermal-sensor-cells = <0>; |
| 51 |
}; |
| 52 |
|
| 53 |
pm8950_vadc: adc@3100 { |
| 54 |
compatible = "qcom,spmi-vadc"; |
| 55 |
reg = <0x3100>; |
| 56 |
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; |
| 57 |
#address-cells = <1>; |
| 58 |
#size-cells = <0>; |
| 59 |
#io-channel-cells = <1>; |
| 60 |
|
| 61 |
channel@5 { |
| 62 |
reg = <VADC_VCOIN>; |
| 63 |
qcom,pre-scaling = <1 1>; |
| 64 |
label = "vcoin"; |
| 65 |
}; |
| 66 |
|
| 67 |
channel@7 { |
| 68 |
reg = <VADC_VSYS>; |
| 69 |
qcom,pre-scaling = <1 1>; |
| 70 |
label = "vph_pwr"; |
| 71 |
}; |
| 72 |
|
| 73 |
channel@8 { |
| 74 |
reg = <VADC_DIE_TEMP>; |
| 75 |
qcom,pre-scaling = <1 1>; |
| 76 |
label = "die_temp"; |
| 77 |
}; |
| 78 |
|
| 79 |
channel@9 { |
| 80 |
reg = <VADC_REF_625MV>; |
| 81 |
qcom,pre-scaling = <1 1>; |
| 82 |
label = "ref_625mv"; |
| 83 |
}; |
| 84 |
|
| 85 |
channel@a { |
| 86 |
reg = <VADC_REF_1250MV>; |
| 87 |
qcom,pre-scaling = <1 1>; |
| 88 |
label = "ref_1250mv"; |
| 89 |
}; |
| 90 |
|
| 91 |
channel@c { |
| 92 |
reg = <VADC_SPARE1>; |
| 93 |
qcom,pre-scaling = <1 1>; |
| 94 |
label = "ref_buf_625mv"; |
| 95 |
}; |
| 96 |
|
| 97 |
channel@e { |
| 98 |
reg = <VADC_GND_REF>; |
| 99 |
label = "ref_gnd"; |
| 100 |
}; |
| 101 |
|
| 102 |
channel@f { |
| 103 |
reg = <VADC_VDD_VADC>; |
| 104 |
label = "ref_vdd"; |
| 105 |
}; |
| 106 |
|
| 107 |
channel@11 { |
| 108 |
reg = <VADC_P_MUX2_1_1>; |
| 109 |
qcom,pre-scaling = <1 1>; |
| 110 |
qcom,ratiometric; |
| 111 |
qcom,hw-settle-time = <200>; |
| 112 |
label = "pa_therm1"; |
| 113 |
}; |
| 114 |
|
| 115 |
channel@13 { |
| 116 |
reg = <VADC_P_MUX4_1_1>; |
| 117 |
qcom,pre-scaling = <1 1>; |
| 118 |
qcom,ratiometric; |
| 119 |
qcom,hw-settle-time = <200>; |
| 120 |
label = "case_therm"; |
| 121 |
}; |
| 122 |
|
| 123 |
channel@32 { |
| 124 |
reg = <VADC_LR_MUX3_XO_THERM>; |
| 125 |
qcom,pre-scaling = <1 1>; |
| 126 |
qcom,ratiometric; |
| 127 |
qcom,hw-settle-time = <200>; |
| 128 |
label = "xo_therm"; |
| 129 |
}; |
| 130 |
|
| 131 |
channel@36 { |
| 132 |
reg = <VADC_LR_MUX7_HW_ID>; |
| 133 |
qcom,pre-scaling = <1 1>; |
| 134 |
qcom,ratiometric; |
| 135 |
qcom,hw-settle-time = <200>; |
| 136 |
label = "pa_therm0"; |
| 137 |
}; |
| 138 |
|
| 139 |
channel@3c { |
| 140 |
reg = <VADC_LR_MUX3_BUF_XO_THERM>; |
| 141 |
qcom,pre-scaling = <1 1>; |
| 142 |
qcom,ratiometric; |
| 143 |
qcom,hw-settle-time = <200>; |
| 144 |
label = "xo_therm_buf"; |
| 145 |
}; |
| 146 |
}; |
| 147 |
|
| 148 |
rtc@6000 { |
| 149 |
compatible = "qcom,pm8941-rtc"; |
| 150 |
reg = <0x6000>, <0x6100>; |
| 151 |
reg-names = "rtc", "alarm"; |
| 152 |
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; |
| 153 |
}; |
| 154 |
|
| 155 |
pm8950_mpps: mpps@a000 { |
| 156 |
compatible = "qcom,pm8950-mpp", "qcom,spmi-mpp"; |
| 157 |
reg = <0xa000>; |
| 158 |
gpio-controller; |
| 159 |
gpio-ranges = <&pm8950_mpps 0 0 4>; |
| 160 |
#gpio-cells = <2>; |
| 161 |
interrupt-controller; |
| 162 |
#interrupt-cells = <2>; |
| 163 |
}; |
| 164 |
|
| 165 |
pm8950_gpios: gpio@c000 { |
| 166 |
compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio"; |
| 167 |
reg = <0xc000>; |
| 168 |
gpio-controller; |
| 169 |
gpio-ranges = <&pm8950_gpios 0 0 8>; |
| 170 |
#gpio-cells = <2>; |
| 171 |
interrupt-controller; |
| 172 |
#interrupt-cells = <2>; |
| 173 |
}; |
| 174 |
}; |
| 175 |
|
| 176 |
pmic@1 { |
| 177 |
compatible = "qcom,pm8950", "qcom,spmi-pmic"; |
| 178 |
reg = <0x1 SPMI_USID>; |
| 179 |
#address-cells = <1>; |
| 180 |
#size-cells = <0>; |
| 181 |
|
| 182 |
pm8950_spmi_regulators: regulators { |
| 183 |
compatible = "qcom,pm8950-regulators"; |
| 184 |
}; |
| 185 |
}; |
| 186 |
}; |