| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2021, AngeloGioacchino Del Regno |
| 4 |
* <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include <dt-bindings/leds/common.h> |
| 11 |
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| 12 |
#include "msm8998.dtsi" |
| 13 |
#include "pm8005.dtsi" |
| 14 |
#include "pm8998.dtsi" |
| 15 |
#include "pmi8998.dtsi" |
| 16 |
|
| 17 |
/ { |
| 18 |
model = "F(x)tec Pro1 (QX1000)"; |
| 19 |
compatible = "fxtec,pro1", "qcom,msm8998"; |
| 20 |
chassis-type = "handset"; |
| 21 |
qcom,board-id = <0x02000b 0x10>; |
| 22 |
|
| 23 |
aliases { |
| 24 |
serial0 = &blsp2_uart1; |
| 25 |
serial1 = &blsp1_uart3; |
| 26 |
}; |
| 27 |
|
| 28 |
/* |
| 29 |
* Until we hook up type-c detection, we |
| 30 |
* have to stick with this. But it works. |
| 31 |
*/ |
| 32 |
extcon_usb: extcon-usb { |
| 33 |
compatible = "linux,extcon-usb-gpio"; |
| 34 |
id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; |
| 35 |
}; |
| 36 |
|
| 37 |
gpio-hall-sensors { |
| 38 |
compatible = "gpio-keys"; |
| 39 |
label = "Hall sensors"; |
| 40 |
pinctrl-names = "default"; |
| 41 |
pinctrl-0 = <&hall_sensor1_default>; |
| 42 |
|
| 43 |
event-hall-sensor1 { |
| 44 |
label = "Keyboard Hall Sensor"; |
| 45 |
gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; |
| 46 |
debounce-interval = <15>; |
| 47 |
wakeup-source; |
| 48 |
linux,input-type = <EV_SW>; |
| 49 |
linux,code = <SW_KEYPAD_SLIDE>; |
| 50 |
}; |
| 51 |
}; |
| 52 |
|
| 53 |
gpio-kb-extra-keys { |
| 54 |
compatible = "gpio-keys"; |
| 55 |
label = "Keyboard extra keys"; |
| 56 |
pinctrl-names = "default"; |
| 57 |
pinctrl-0 = <&gpio_kb_pins_extra>; |
| 58 |
|
| 59 |
key-home { |
| 60 |
label = "Home"; |
| 61 |
gpios = <&tlmm 21 GPIO_ACTIVE_LOW>; |
| 62 |
linux,code = <KEY_HOMEPAGE>; |
| 63 |
debounce-interval = <15>; |
| 64 |
linux,can-disable; |
| 65 |
}; |
| 66 |
|
| 67 |
key-super-l { |
| 68 |
label = "Super Left"; |
| 69 |
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; |
| 70 |
linux,code = <KEY_FN>; |
| 71 |
debounce-interval = <15>; |
| 72 |
linux,can-disable; |
| 73 |
}; |
| 74 |
|
| 75 |
key-super-r { |
| 76 |
label = "Super Right"; |
| 77 |
gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; |
| 78 |
linux,code = <KEY_FN>; |
| 79 |
debounce-interval = <15>; |
| 80 |
linux,can-disable; |
| 81 |
}; |
| 82 |
|
| 83 |
key-shift { |
| 84 |
label = "Shift"; |
| 85 |
gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; |
| 86 |
linux,code = <KEY_RIGHTSHIFT>; |
| 87 |
debounce-interval = <15>; |
| 88 |
linux,can-disable; |
| 89 |
}; |
| 90 |
|
| 91 |
key-ctrl { |
| 92 |
label = "Ctrl"; |
| 93 |
gpios = <&tlmm 128 GPIO_ACTIVE_LOW>; |
| 94 |
linux,code = <KEY_LEFTCTRL>; |
| 95 |
debounce-interval = <15>; |
| 96 |
linux,can-disable; |
| 97 |
}; |
| 98 |
|
| 99 |
key-alt { |
| 100 |
label = "Alt"; |
| 101 |
gpios = <&tlmm 129 GPIO_ACTIVE_LOW>; |
| 102 |
linux,code = <KEY_LEFTALT>; |
| 103 |
debounce-interval = <15>; |
| 104 |
linux,can-disable; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
gpio-keys { |
| 109 |
compatible = "gpio-keys"; |
| 110 |
label = "Side buttons"; |
| 111 |
pinctrl-names = "default"; |
| 112 |
pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>, |
| 113 |
<&cam_snapshot_pin_a>; |
| 114 |
button-vol-up { |
| 115 |
label = "Volume Up"; |
| 116 |
gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; |
| 117 |
linux,input-type = <EV_KEY>; |
| 118 |
linux,code = <KEY_VOLUMEUP>; |
| 119 |
wakeup-source; |
| 120 |
debounce-interval = <15>; |
| 121 |
}; |
| 122 |
|
| 123 |
button-camera-snapshot { |
| 124 |
label = "Camera Snapshot"; |
| 125 |
gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>; |
| 126 |
linux,input-type = <EV_KEY>; |
| 127 |
linux,code = <KEY_CAMERA>; |
| 128 |
debounce-interval = <15>; |
| 129 |
}; |
| 130 |
|
| 131 |
button-camera-focus { |
| 132 |
label = "Camera Focus"; |
| 133 |
gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>; |
| 134 |
linux,input-type = <EV_KEY>; |
| 135 |
linux,code = <KEY_CAMERA_FOCUS>; |
| 136 |
debounce-interval = <15>; |
| 137 |
}; |
| 138 |
}; |
| 139 |
|
| 140 |
keyboard-leds { |
| 141 |
compatible = "gpio-leds"; |
| 142 |
|
| 143 |
led-0 { |
| 144 |
color = <LED_COLOR_ID_WHITE>; |
| 145 |
default-state = "off"; |
| 146 |
function = LED_FUNCTION_KBD_BACKLIGHT; |
| 147 |
gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; |
| 148 |
label = "white:kbd_backlight"; |
| 149 |
retain-state-suspended; |
| 150 |
}; |
| 151 |
|
| 152 |
led-1 { |
| 153 |
color = <LED_COLOR_ID_YELLOW>; |
| 154 |
default-state = "off"; |
| 155 |
function = LED_FUNCTION_CAPSLOCK; |
| 156 |
gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; |
| 157 |
label = "yellow:capslock"; |
| 158 |
linux,default-trigger = "kbd-capslock"; |
| 159 |
}; |
| 160 |
}; |
| 161 |
|
| 162 |
reserved-memory { |
| 163 |
cont_splash_mem: memory@9d400000 { |
| 164 |
reg = <0x0 0x9d400000 0x0 0x2000000>; |
| 165 |
no-map; |
| 166 |
}; |
| 167 |
|
| 168 |
zap_shader_region: memory@f6400000 { |
| 169 |
compatible = "shared-dma-pool"; |
| 170 |
reg = <0x0 0xf6400000 0x0 0x2000>; |
| 171 |
no-map; |
| 172 |
}; |
| 173 |
|
| 174 |
ramoops@ffc00000 { |
| 175 |
compatible = "ramoops"; |
| 176 |
reg = <0x0 0xffc00000 0x0 0x100000>; |
| 177 |
console-size = <0x60000>; |
| 178 |
ecc-size = <16>; |
| 179 |
ftrace-size = <0x10000>; |
| 180 |
pmsg-size = <0x20000>; |
| 181 |
record-size = <0x10000>; |
| 182 |
}; |
| 183 |
}; |
| 184 |
|
| 185 |
ts_vio_vreg: ts-vio-vreg { |
| 186 |
compatible = "regulator-fixed"; |
| 187 |
regulator-name = "ts_vio_reg"; |
| 188 |
startup-delay-us = <2>; |
| 189 |
enable-active-high; |
| 190 |
gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; |
| 191 |
pinctrl-names = "default"; |
| 192 |
pinctrl-0 = <&ts_vio_default>; |
| 193 |
regulator-always-on; |
| 194 |
}; |
| 195 |
|
| 196 |
vph_pwr: vph-pwr-regulator { |
| 197 |
compatible = "regulator-fixed"; |
| 198 |
regulator-name = "vph_pwr"; |
| 199 |
regulator-always-on; |
| 200 |
regulator-boot-on; |
| 201 |
}; |
| 202 |
}; |
| 203 |
|
| 204 |
&blsp1_uart3 { |
| 205 |
status = "okay"; |
| 206 |
|
| 207 |
bluetooth { |
| 208 |
compatible = "qcom,wcn3990-bt"; |
| 209 |
|
| 210 |
vddio-supply = <&vreg_s4a_1p8>; |
| 211 |
vddxo-supply = <&vreg_l7a_1p8>; |
| 212 |
vddrf-supply = <&vreg_l17a_1p3>; |
| 213 |
vddch0-supply = <&vreg_l25a_3p3>; |
| 214 |
max-speed = <3200000>; |
| 215 |
}; |
| 216 |
}; |
| 217 |
|
| 218 |
&blsp1_uart3_on { |
| 219 |
rx-pins { |
| 220 |
/delete-property/ bias-disable; |
| 221 |
/* |
| 222 |
* Configure a pull-up on 45 (RX). This is needed to |
| 223 |
* avoid garbage data when the TX pin of the Bluetooth |
| 224 |
* module is in tri-state (module powered off or not |
| 225 |
* driving the signal yet). |
| 226 |
*/ |
| 227 |
bias-pull-up; |
| 228 |
}; |
| 229 |
|
| 230 |
cts-pins { |
| 231 |
/delete-property/ bias-disable; |
| 232 |
/* |
| 233 |
* Configure a pull-down on 47 (CTS) to match the pull |
| 234 |
* of the Bluetooth module. |
| 235 |
*/ |
| 236 |
bias-pull-down; |
| 237 |
}; |
| 238 |
}; |
| 239 |
|
| 240 |
&blsp2_uart1 { |
| 241 |
status = "okay"; |
| 242 |
}; |
| 243 |
|
| 244 |
&blsp2_i2c1 { |
| 245 |
status = "okay"; |
| 246 |
|
| 247 |
touchscreen@14 { |
| 248 |
compatible = "goodix,gt9286"; |
| 249 |
reg = <0x14>; |
| 250 |
interrupt-parent = <&tlmm>; |
| 251 |
interrupts = <125 IRQ_TYPE_LEVEL_LOW>; |
| 252 |
reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; |
| 253 |
AVDD28-supply = <&vreg_l28_3p0>; |
| 254 |
VDDIO-supply = <&ts_vio_vreg>; |
| 255 |
pinctrl-names = "active"; |
| 256 |
pinctrl-0 = <&ts_rst_n>, <&ts_int_n>; |
| 257 |
}; |
| 258 |
}; |
| 259 |
|
| 260 |
&etf { |
| 261 |
status = "okay"; |
| 262 |
}; |
| 263 |
|
| 264 |
&etm1 { |
| 265 |
status = "okay"; |
| 266 |
}; |
| 267 |
|
| 268 |
&etm2 { |
| 269 |
status = "okay"; |
| 270 |
}; |
| 271 |
|
| 272 |
&etm3 { |
| 273 |
status = "okay"; |
| 274 |
}; |
| 275 |
|
| 276 |
&etm4 { |
| 277 |
status = "okay"; |
| 278 |
}; |
| 279 |
|
| 280 |
&etm5 { |
| 281 |
status = "okay"; |
| 282 |
}; |
| 283 |
|
| 284 |
&etm6 { |
| 285 |
status = "okay"; |
| 286 |
}; |
| 287 |
|
| 288 |
&etm7 { |
| 289 |
status = "okay"; |
| 290 |
}; |
| 291 |
|
| 292 |
&etm8 { |
| 293 |
status = "okay"; |
| 294 |
}; |
| 295 |
|
| 296 |
&etr { |
| 297 |
status = "okay"; |
| 298 |
}; |
| 299 |
|
| 300 |
&funnel1 { |
| 301 |
status = "okay"; |
| 302 |
}; |
| 303 |
|
| 304 |
&funnel2 { |
| 305 |
status = "okay"; |
| 306 |
}; |
| 307 |
|
| 308 |
&funnel3 { |
| 309 |
status = "okay"; |
| 310 |
}; |
| 311 |
|
| 312 |
&funnel4 { |
| 313 |
/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */ |
| 314 |
}; |
| 315 |
|
| 316 |
&funnel5 { |
| 317 |
/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */ |
| 318 |
}; |
| 319 |
|
| 320 |
&pcie0 { |
| 321 |
status = "okay"; |
| 322 |
}; |
| 323 |
|
| 324 |
&pcie_phy { |
| 325 |
status = "okay"; |
| 326 |
}; |
| 327 |
|
| 328 |
&pm8005_regulators { |
| 329 |
vdd_s1-supply = <&vph_pwr>; |
| 330 |
|
| 331 |
pm8005_s1: s1 { /* VDD_GFX supply */ |
| 332 |
regulator-min-microvolt = <524000>; |
| 333 |
regulator-max-microvolt = <1100000>; |
| 334 |
regulator-enable-ramp-delay = <500>; |
| 335 |
|
| 336 |
/* Hack until we rig up the gpu consumer */ |
| 337 |
regulator-always-on; |
| 338 |
}; |
| 339 |
}; |
| 340 |
|
| 341 |
&pm8998_gpios { |
| 342 |
vol_up_pin_a: vol-up-active-state { |
| 343 |
pins = "gpio6"; |
| 344 |
function = "normal"; |
| 345 |
bias-pull-up; |
| 346 |
input-enable; |
| 347 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 348 |
}; |
| 349 |
|
| 350 |
cam_focus_pin_a: cam-focus-btn-active-state { |
| 351 |
pins = "gpio7"; |
| 352 |
function = "normal"; |
| 353 |
bias-pull-up; |
| 354 |
input-enable; |
| 355 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 356 |
}; |
| 357 |
|
| 358 |
cam_snapshot_pin_a: cam-snapshot-btn-active-state { |
| 359 |
pins = "gpio8"; |
| 360 |
function = "normal"; |
| 361 |
bias-pull-up; |
| 362 |
input-enable; |
| 363 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 364 |
}; |
| 365 |
}; |
| 366 |
|
| 367 |
&pm8998_resin { |
| 368 |
linux,code = <KEY_VOLUMEDOWN>; |
| 369 |
status = "okay"; |
| 370 |
}; |
| 371 |
|
| 372 |
&qusb2phy { |
| 373 |
status = "okay"; |
| 374 |
|
| 375 |
vdd-supply = <&vreg_l1a_0p875>; |
| 376 |
vdda-pll-supply = <&vreg_l12a_1p8>; |
| 377 |
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; |
| 378 |
}; |
| 379 |
|
| 380 |
&replicator1 { |
| 381 |
status = "okay"; |
| 382 |
}; |
| 383 |
|
| 384 |
&rpm_requests { |
| 385 |
regulators-0 { |
| 386 |
compatible = "qcom,rpm-pm8998-regulators"; |
| 387 |
|
| 388 |
vdd_s1-supply = <&vph_pwr>; |
| 389 |
vdd_s2-supply = <&vph_pwr>; |
| 390 |
vdd_s3-supply = <&vph_pwr>; |
| 391 |
vdd_s4-supply = <&vph_pwr>; |
| 392 |
vdd_s5-supply = <&vph_pwr>; |
| 393 |
vdd_s6-supply = <&vph_pwr>; |
| 394 |
vdd_s7-supply = <&vph_pwr>; |
| 395 |
vdd_s8-supply = <&vph_pwr>; |
| 396 |
vdd_s9-supply = <&vph_pwr>; |
| 397 |
vdd_s10-supply = <&vph_pwr>; |
| 398 |
vdd_s11-supply = <&vph_pwr>; |
| 399 |
vdd_s12-supply = <&vph_pwr>; |
| 400 |
vdd_s13-supply = <&vph_pwr>; |
| 401 |
vdd_l1_l27-supply = <&vreg_s7a_1p025>; |
| 402 |
vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; |
| 403 |
vdd_l3_l11-supply = <&vreg_s7a_1p025>; |
| 404 |
vdd_l4_l5-supply = <&vreg_s7a_1p025>; |
| 405 |
vdd_l6-supply = <&vreg_s5a_2p04>; |
| 406 |
vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; |
| 407 |
vdd_l9-supply = <&vreg_bob>; |
| 408 |
vdd_l10_l23_l25-supply = <&vreg_bob>; |
| 409 |
vdd_l13_l19_l21-supply = <&vreg_bob>; |
| 410 |
vdd_l16_l28-supply = <&vreg_bob>; |
| 411 |
vdd_l18_l22-supply = <&vreg_bob>; |
| 412 |
vdd_l20_l24-supply = <&vreg_bob>; |
| 413 |
vdd_l26-supply = <&vreg_s3a_1p35>; |
| 414 |
vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; |
| 415 |
|
| 416 |
vreg_s3a_1p35: s3 { |
| 417 |
regulator-min-microvolt = <1352000>; |
| 418 |
regulator-max-microvolt = <1352000>; |
| 419 |
}; |
| 420 |
|
| 421 |
vreg_s4a_1p8: s4 { |
| 422 |
regulator-min-microvolt = <1800000>; |
| 423 |
regulator-max-microvolt = <1800000>; |
| 424 |
regulator-allow-set-load; |
| 425 |
}; |
| 426 |
|
| 427 |
vreg_s5a_2p04: s5 { |
| 428 |
regulator-min-microvolt = <1904000>; |
| 429 |
regulator-max-microvolt = <2040000>; |
| 430 |
}; |
| 431 |
|
| 432 |
vreg_s7a_1p025: s7 { |
| 433 |
regulator-min-microvolt = <900000>; |
| 434 |
regulator-max-microvolt = <1028000>; |
| 435 |
}; |
| 436 |
|
| 437 |
vreg_l1a_0p875: l1 { |
| 438 |
regulator-min-microvolt = <880000>; |
| 439 |
regulator-max-microvolt = <880000>; |
| 440 |
}; |
| 441 |
|
| 442 |
vreg_l2a_1p2: l2 { |
| 443 |
regulator-min-microvolt = <1200000>; |
| 444 |
regulator-max-microvolt = <1200000>; |
| 445 |
}; |
| 446 |
|
| 447 |
vreg_l3a_1p0: l3 { |
| 448 |
regulator-min-microvolt = <1000000>; |
| 449 |
regulator-max-microvolt = <1000000>; |
| 450 |
}; |
| 451 |
|
| 452 |
vreg_l5a_0p8: l5 { |
| 453 |
regulator-min-microvolt = <800000>; |
| 454 |
regulator-max-microvolt = <800000>; |
| 455 |
}; |
| 456 |
|
| 457 |
vreg_l6a_1p8: l6 { |
| 458 |
regulator-min-microvolt = <1808000>; |
| 459 |
regulator-max-microvolt = <1808000>; |
| 460 |
}; |
| 461 |
|
| 462 |
vreg_l7a_1p8: l7 { |
| 463 |
regulator-min-microvolt = <1800000>; |
| 464 |
regulator-max-microvolt = <1800000>; |
| 465 |
}; |
| 466 |
|
| 467 |
vreg_l8a_1p2: l8 { |
| 468 |
regulator-min-microvolt = <1200000>; |
| 469 |
regulator-max-microvolt = <1200000>; |
| 470 |
}; |
| 471 |
|
| 472 |
vreg_l9a_1p8: l9 { |
| 473 |
regulator-min-microvolt = <1808000>; |
| 474 |
regulator-max-microvolt = <2960000>; |
| 475 |
}; |
| 476 |
|
| 477 |
vreg_l10a_1p8: l10 { |
| 478 |
regulator-min-microvolt = <1808000>; |
| 479 |
regulator-max-microvolt = <2960000>; |
| 480 |
}; |
| 481 |
|
| 482 |
vreg_l11a_1p0: l11 { |
| 483 |
regulator-min-microvolt = <1000000>; |
| 484 |
regulator-max-microvolt = <1000000>; |
| 485 |
}; |
| 486 |
|
| 487 |
vreg_l12a_1p8: l12 { |
| 488 |
regulator-min-microvolt = <1800000>; |
| 489 |
regulator-max-microvolt = <1800000>; |
| 490 |
}; |
| 491 |
|
| 492 |
vreg_l13a_2p95: l13 { |
| 493 |
regulator-min-microvolt = <1808000>; |
| 494 |
regulator-max-microvolt = <2960000>; |
| 495 |
}; |
| 496 |
|
| 497 |
vreg_l14a_1p88: l14 { |
| 498 |
regulator-min-microvolt = <1880000>; |
| 499 |
regulator-max-microvolt = <1880000>; |
| 500 |
}; |
| 501 |
|
| 502 |
vreg_l15a_1p8: l15 { |
| 503 |
regulator-min-microvolt = <1800000>; |
| 504 |
regulator-max-microvolt = <1800000>; |
| 505 |
}; |
| 506 |
|
| 507 |
vreg_l16a_2p7: l16 { |
| 508 |
regulator-min-microvolt = <2704000>; |
| 509 |
regulator-max-microvolt = <2704000>; |
| 510 |
}; |
| 511 |
|
| 512 |
vreg_l17a_1p3: l17 { |
| 513 |
regulator-min-microvolt = <1304000>; |
| 514 |
regulator-max-microvolt = <1304000>; |
| 515 |
}; |
| 516 |
|
| 517 |
vreg_l18a_2p7: l18 { |
| 518 |
regulator-min-microvolt = <2704000>; |
| 519 |
regulator-max-microvolt = <2704000>; |
| 520 |
}; |
| 521 |
|
| 522 |
vreg_l19a_3p0: l19 { |
| 523 |
regulator-min-microvolt = <3008000>; |
| 524 |
regulator-max-microvolt = <3008000>; |
| 525 |
}; |
| 526 |
|
| 527 |
vreg_l20a_2p95: l20 { |
| 528 |
regulator-min-microvolt = <2960000>; |
| 529 |
regulator-max-microvolt = <2960000>; |
| 530 |
regulator-allow-set-load; |
| 531 |
}; |
| 532 |
|
| 533 |
vreg_l21a_2p95: l21 { |
| 534 |
regulator-min-microvolt = <2960000>; |
| 535 |
regulator-max-microvolt = <2960000>; |
| 536 |
regulator-system-load = <800000>; |
| 537 |
regulator-allow-set-load; |
| 538 |
}; |
| 539 |
|
| 540 |
vreg_l22a_2p85: l22 { |
| 541 |
regulator-min-microvolt = <2864000>; |
| 542 |
regulator-max-microvolt = <2864000>; |
| 543 |
}; |
| 544 |
|
| 545 |
vreg_l23a_3p3: l23 { |
| 546 |
regulator-min-microvolt = <3312000>; |
| 547 |
regulator-max-microvolt = <3312000>; |
| 548 |
}; |
| 549 |
|
| 550 |
vreg_l24a_3p075: l24 { |
| 551 |
regulator-min-microvolt = <3088000>; |
| 552 |
regulator-max-microvolt = <3088000>; |
| 553 |
}; |
| 554 |
|
| 555 |
vreg_l25a_3p3: l25 { |
| 556 |
regulator-min-microvolt = <3104000>; |
| 557 |
regulator-max-microvolt = <3312000>; |
| 558 |
}; |
| 559 |
|
| 560 |
vreg_l26a_1p2: l26 { |
| 561 |
regulator-min-microvolt = <1200000>; |
| 562 |
regulator-max-microvolt = <1200000>; |
| 563 |
regulator-allow-set-load; |
| 564 |
}; |
| 565 |
|
| 566 |
vreg_l28_3p0: l28 { |
| 567 |
regulator-min-microvolt = <3008000>; |
| 568 |
regulator-max-microvolt = <3008000>; |
| 569 |
}; |
| 570 |
|
| 571 |
vreg_lvs1a_1p8: lvs1 { |
| 572 |
regulator-min-microvolt = <1800000>; |
| 573 |
regulator-max-microvolt = <1800000>; |
| 574 |
}; |
| 575 |
|
| 576 |
vreg_lvs2a_1p8: lvs2 { |
| 577 |
regulator-min-microvolt = <1800000>; |
| 578 |
regulator-max-microvolt = <1800000>; |
| 579 |
}; |
| 580 |
|
| 581 |
}; |
| 582 |
|
| 583 |
regulators-1 { |
| 584 |
compatible = "qcom,rpm-pmi8998-regulators"; |
| 585 |
|
| 586 |
vdd_bob-supply = <&vph_pwr>; |
| 587 |
|
| 588 |
vreg_bob: bob { |
| 589 |
regulator-min-microvolt = <3312000>; |
| 590 |
regulator-max-microvolt = <3600000>; |
| 591 |
}; |
| 592 |
}; |
| 593 |
}; |
| 594 |
|
| 595 |
&remoteproc_adsp { |
| 596 |
status = "okay"; |
| 597 |
}; |
| 598 |
|
| 599 |
&remoteproc_mss { |
| 600 |
status = "okay"; |
| 601 |
}; |
| 602 |
|
| 603 |
&remoteproc_slpi { |
| 604 |
status = "okay"; |
| 605 |
}; |
| 606 |
|
| 607 |
&tlmm { |
| 608 |
gpio-reserved-ranges = <0 4>; |
| 609 |
|
| 610 |
mdp_vsync_n: mdp-vsync-n-state { |
| 611 |
pins = "gpio10"; |
| 612 |
function = "mdp_vsync_a"; |
| 613 |
bias-pull-down; |
| 614 |
drive-strength = <2>; |
| 615 |
}; |
| 616 |
|
| 617 |
gpio_kb_pins_extra: gpio-kb-pins-extra-state { |
| 618 |
pins = "gpio21", "gpio32", "gpio33", "gpio114", |
| 619 |
"gpio128", "gpio129"; |
| 620 |
function = "gpio"; |
| 621 |
drive-strength = <2>; |
| 622 |
bias-pull-up; |
| 623 |
}; |
| 624 |
|
| 625 |
ts_vio_default: ts-vio-def-state { |
| 626 |
pins = "gpio81"; |
| 627 |
function = "gpio"; |
| 628 |
bias-disable; |
| 629 |
drive-strength = <2>; |
| 630 |
}; |
| 631 |
|
| 632 |
ts_rst_n: ts-rst-n-state { |
| 633 |
pins = "gpio89"; |
| 634 |
function = "gpio"; |
| 635 |
bias-pull-up; |
| 636 |
drive-strength = <8>; |
| 637 |
}; |
| 638 |
|
| 639 |
hall_sensor1_default: hall-sensor1-def-state { |
| 640 |
pins = "gpio124"; |
| 641 |
function = "gpio"; |
| 642 |
bias-disable; |
| 643 |
drive-strength = <2>; |
| 644 |
}; |
| 645 |
|
| 646 |
ts_int_n: ts-int-n-state { |
| 647 |
pins = "gpio125"; |
| 648 |
function = "gpio"; |
| 649 |
bias-disable; |
| 650 |
drive-strength = <8>; |
| 651 |
}; |
| 652 |
}; |
| 653 |
|
| 654 |
&sdhc2 { |
| 655 |
status = "okay"; |
| 656 |
cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; |
| 657 |
|
| 658 |
vmmc-supply = <&vreg_l21a_2p95>; |
| 659 |
vqmmc-supply = <&vreg_l13a_2p95>; |
| 660 |
|
| 661 |
pinctrl-names = "default", "sleep"; |
| 662 |
pinctrl-0 = <&sdc2_on &sdc2_cd>; |
| 663 |
pinctrl-1 = <&sdc2_off &sdc2_cd>; |
| 664 |
}; |
| 665 |
|
| 666 |
&stm { |
| 667 |
status = "okay"; |
| 668 |
}; |
| 669 |
|
| 670 |
&ufshc { |
| 671 |
status = "okay"; |
| 672 |
vcc-supply = <&vreg_l20a_2p95>; |
| 673 |
vccq-supply = <&vreg_l26a_1p2>; |
| 674 |
vccq2-supply = <&vreg_s4a_1p8>; |
| 675 |
vdd-hba-supply = <&vreg_l26a_1p2>; |
| 676 |
vcc-max-microamp = <750000>; |
| 677 |
vccq-max-microamp = <560000>; |
| 678 |
vccq2-max-microamp = <750000>; |
| 679 |
}; |
| 680 |
|
| 681 |
&ufsphy { |
| 682 |
status = "okay"; |
| 683 |
vdda-phy-supply = <&vreg_l1a_0p875>; |
| 684 |
vdda-pll-supply = <&vreg_l2a_1p2>; |
| 685 |
}; |
| 686 |
|
| 687 |
&usb3 { |
| 688 |
status = "okay"; |
| 689 |
}; |
| 690 |
|
| 691 |
&usb3_dwc3 { |
| 692 |
dr_mode = "peripheral"; |
| 693 |
extcon = <&extcon_usb>; |
| 694 |
}; |
| 695 |
|
| 696 |
&usb3phy { |
| 697 |
status = "okay"; |
| 698 |
|
| 699 |
vdda-phy-supply = <&vreg_l1a_0p875>; |
| 700 |
vdda-pll-supply = <&vreg_l2a_1p2>; |
| 701 |
}; |
| 702 |
|
| 703 |
/* GT9286 analog supply */ |
| 704 |
&vreg_l28_3p0 { |
| 705 |
regulator-min-microvolt = <2800000>; |
| 706 |
regulator-max-microvolt = <2800000>; |
| 707 |
}; |
| 708 |
|
| 709 |
&wifi { |
| 710 |
status = "okay"; |
| 711 |
|
| 712 |
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; |
| 713 |
vdd-1.8-xo-supply = <&vreg_l7a_1p8>; |
| 714 |
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; |
| 715 |
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; |
| 716 |
}; |