| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 7 |
#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> |
| 8 |
#include <dt-bindings/clock/qcom,gcc-msm8996.h> |
| 9 |
#include <dt-bindings/clock/qcom,mmcc-msm8996.h> |
| 10 |
#include <dt-bindings/clock/qcom,rpmcc.h> |
| 11 |
#include <dt-bindings/interconnect/qcom,msm8996.h> |
| 12 |
#include <dt-bindings/interconnect/qcom,msm8996-cbf.h> |
| 13 |
#include <dt-bindings/firmware/qcom,scm.h> |
| 14 |
#include <dt-bindings/gpio/gpio.h> |
| 15 |
#include <dt-bindings/power/qcom-rpmpd.h> |
| 16 |
#include <dt-bindings/soc/qcom,apr.h> |
| 17 |
#include <dt-bindings/thermal/thermal.h> |
| 18 |
|
| 19 |
/ { |
| 20 |
interrupt-parent = <&intc>; |
| 21 |
|
| 22 |
#address-cells = <2>; |
| 23 |
#size-cells = <2>; |
| 24 |
|
| 25 |
chosen { }; |
| 26 |
|
| 27 |
clocks { |
| 28 |
xo_board: xo-board { |
| 29 |
compatible = "fixed-clock"; |
| 30 |
#clock-cells = <0>; |
| 31 |
clock-frequency = <19200000>; |
| 32 |
clock-output-names = "xo_board"; |
| 33 |
}; |
| 34 |
|
| 35 |
sleep_clk: sleep-clk { |
| 36 |
compatible = "fixed-clock"; |
| 37 |
#clock-cells = <0>; |
| 38 |
clock-frequency = <32764>; |
| 39 |
clock-output-names = "sleep_clk"; |
| 40 |
}; |
| 41 |
}; |
| 42 |
|
| 43 |
cpus { |
| 44 |
#address-cells = <2>; |
| 45 |
#size-cells = <0>; |
| 46 |
|
| 47 |
cpu0: cpu@0 { |
| 48 |
device_type = "cpu"; |
| 49 |
compatible = "qcom,kryo"; |
| 50 |
reg = <0x0 0x0>; |
| 51 |
enable-method = "psci"; |
| 52 |
cpu-idle-states = <&cpu_sleep_0>; |
| 53 |
capacity-dmips-mhz = <1024>; |
| 54 |
clocks = <&kryocc 0>; |
| 55 |
interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; |
| 56 |
operating-points-v2 = <&cluster0_opp>; |
| 57 |
#cooling-cells = <2>; |
| 58 |
next-level-cache = <&l2_0>; |
| 59 |
l2_0: l2-cache { |
| 60 |
compatible = "cache"; |
| 61 |
cache-level = <2>; |
| 62 |
cache-unified; |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
cpu1: cpu@1 { |
| 67 |
device_type = "cpu"; |
| 68 |
compatible = "qcom,kryo"; |
| 69 |
reg = <0x0 0x1>; |
| 70 |
enable-method = "psci"; |
| 71 |
cpu-idle-states = <&cpu_sleep_0>; |
| 72 |
capacity-dmips-mhz = <1024>; |
| 73 |
clocks = <&kryocc 0>; |
| 74 |
interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; |
| 75 |
operating-points-v2 = <&cluster0_opp>; |
| 76 |
#cooling-cells = <2>; |
| 77 |
next-level-cache = <&l2_0>; |
| 78 |
}; |
| 79 |
|
| 80 |
cpu2: cpu@100 { |
| 81 |
device_type = "cpu"; |
| 82 |
compatible = "qcom,kryo"; |
| 83 |
reg = <0x0 0x100>; |
| 84 |
enable-method = "psci"; |
| 85 |
cpu-idle-states = <&cpu_sleep_0>; |
| 86 |
capacity-dmips-mhz = <1024>; |
| 87 |
clocks = <&kryocc 1>; |
| 88 |
interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; |
| 89 |
operating-points-v2 = <&cluster1_opp>; |
| 90 |
#cooling-cells = <2>; |
| 91 |
next-level-cache = <&l2_1>; |
| 92 |
l2_1: l2-cache { |
| 93 |
compatible = "cache"; |
| 94 |
cache-level = <2>; |
| 95 |
cache-unified; |
| 96 |
}; |
| 97 |
}; |
| 98 |
|
| 99 |
cpu3: cpu@101 { |
| 100 |
device_type = "cpu"; |
| 101 |
compatible = "qcom,kryo"; |
| 102 |
reg = <0x0 0x101>; |
| 103 |
enable-method = "psci"; |
| 104 |
cpu-idle-states = <&cpu_sleep_0>; |
| 105 |
capacity-dmips-mhz = <1024>; |
| 106 |
clocks = <&kryocc 1>; |
| 107 |
interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; |
| 108 |
operating-points-v2 = <&cluster1_opp>; |
| 109 |
#cooling-cells = <2>; |
| 110 |
next-level-cache = <&l2_1>; |
| 111 |
}; |
| 112 |
|
| 113 |
cpu-map { |
| 114 |
cluster0 { |
| 115 |
core0 { |
| 116 |
cpu = <&cpu0>; |
| 117 |
}; |
| 118 |
|
| 119 |
core1 { |
| 120 |
cpu = <&cpu1>; |
| 121 |
}; |
| 122 |
}; |
| 123 |
|
| 124 |
cluster1 { |
| 125 |
core0 { |
| 126 |
cpu = <&cpu2>; |
| 127 |
}; |
| 128 |
|
| 129 |
core1 { |
| 130 |
cpu = <&cpu3>; |
| 131 |
}; |
| 132 |
}; |
| 133 |
}; |
| 134 |
|
| 135 |
idle-states { |
| 136 |
entry-method = "psci"; |
| 137 |
|
| 138 |
cpu_sleep_0: cpu-sleep-0 { |
| 139 |
compatible = "arm,idle-state"; |
| 140 |
idle-state-name = "standalone-power-collapse"; |
| 141 |
arm,psci-suspend-param = <0x00000004>; |
| 142 |
entry-latency-us = <130>; |
| 143 |
exit-latency-us = <80>; |
| 144 |
min-residency-us = <300>; |
| 145 |
}; |
| 146 |
}; |
| 147 |
}; |
| 148 |
|
| 149 |
cluster0_opp: opp-table-cluster0 { |
| 150 |
compatible = "operating-points-v2-kryo-cpu"; |
| 151 |
nvmem-cells = <&speedbin_efuse>; |
| 152 |
opp-shared; |
| 153 |
|
| 154 |
/* Nominal fmax for now */ |
| 155 |
opp-307200000 { |
| 156 |
opp-hz = /bits/ 64 <307200000>; |
| 157 |
opp-supported-hw = <0xf>; |
| 158 |
clock-latency-ns = <200000>; |
| 159 |
opp-peak-kBps = <307200>; |
| 160 |
}; |
| 161 |
opp-422400000 { |
| 162 |
opp-hz = /bits/ 64 <422400000>; |
| 163 |
opp-supported-hw = <0xf>; |
| 164 |
clock-latency-ns = <200000>; |
| 165 |
opp-peak-kBps = <307200>; |
| 166 |
}; |
| 167 |
opp-480000000 { |
| 168 |
opp-hz = /bits/ 64 <480000000>; |
| 169 |
opp-supported-hw = <0xf>; |
| 170 |
clock-latency-ns = <200000>; |
| 171 |
opp-peak-kBps = <307200>; |
| 172 |
}; |
| 173 |
opp-556800000 { |
| 174 |
opp-hz = /bits/ 64 <556800000>; |
| 175 |
opp-supported-hw = <0xf>; |
| 176 |
clock-latency-ns = <200000>; |
| 177 |
opp-peak-kBps = <307200>; |
| 178 |
}; |
| 179 |
opp-652800000 { |
| 180 |
opp-hz = /bits/ 64 <652800000>; |
| 181 |
opp-supported-hw = <0xf>; |
| 182 |
clock-latency-ns = <200000>; |
| 183 |
opp-peak-kBps = <384000>; |
| 184 |
}; |
| 185 |
opp-729600000 { |
| 186 |
opp-hz = /bits/ 64 <729600000>; |
| 187 |
opp-supported-hw = <0xf>; |
| 188 |
clock-latency-ns = <200000>; |
| 189 |
opp-peak-kBps = <460800>; |
| 190 |
}; |
| 191 |
opp-844800000 { |
| 192 |
opp-hz = /bits/ 64 <844800000>; |
| 193 |
opp-supported-hw = <0xf>; |
| 194 |
clock-latency-ns = <200000>; |
| 195 |
opp-peak-kBps = <537600>; |
| 196 |
}; |
| 197 |
opp-960000000 { |
| 198 |
opp-hz = /bits/ 64 <960000000>; |
| 199 |
opp-supported-hw = <0xf>; |
| 200 |
clock-latency-ns = <200000>; |
| 201 |
opp-peak-kBps = <672000>; |
| 202 |
}; |
| 203 |
opp-1036800000 { |
| 204 |
opp-hz = /bits/ 64 <1036800000>; |
| 205 |
opp-supported-hw = <0xf>; |
| 206 |
clock-latency-ns = <200000>; |
| 207 |
opp-peak-kBps = <672000>; |
| 208 |
}; |
| 209 |
opp-1113600000 { |
| 210 |
opp-hz = /bits/ 64 <1113600000>; |
| 211 |
opp-supported-hw = <0xf>; |
| 212 |
clock-latency-ns = <200000>; |
| 213 |
opp-peak-kBps = <825600>; |
| 214 |
}; |
| 215 |
opp-1190400000 { |
| 216 |
opp-hz = /bits/ 64 <1190400000>; |
| 217 |
opp-supported-hw = <0xf>; |
| 218 |
clock-latency-ns = <200000>; |
| 219 |
opp-peak-kBps = <825600>; |
| 220 |
}; |
| 221 |
opp-1228800000 { |
| 222 |
opp-hz = /bits/ 64 <1228800000>; |
| 223 |
opp-supported-hw = <0xf>; |
| 224 |
clock-latency-ns = <200000>; |
| 225 |
opp-peak-kBps = <902400>; |
| 226 |
}; |
| 227 |
opp-1324800000 { |
| 228 |
opp-hz = /bits/ 64 <1324800000>; |
| 229 |
opp-supported-hw = <0xd>; |
| 230 |
clock-latency-ns = <200000>; |
| 231 |
opp-peak-kBps = <1056000>; |
| 232 |
}; |
| 233 |
opp-1363200000 { |
| 234 |
opp-hz = /bits/ 64 <1363200000>; |
| 235 |
opp-supported-hw = <0x2>; |
| 236 |
clock-latency-ns = <200000>; |
| 237 |
opp-peak-kBps = <1132800>; |
| 238 |
}; |
| 239 |
opp-1401600000 { |
| 240 |
opp-hz = /bits/ 64 <1401600000>; |
| 241 |
opp-supported-hw = <0xd>; |
| 242 |
clock-latency-ns = <200000>; |
| 243 |
opp-peak-kBps = <1132800>; |
| 244 |
}; |
| 245 |
opp-1478400000 { |
| 246 |
opp-hz = /bits/ 64 <1478400000>; |
| 247 |
opp-supported-hw = <0x9>; |
| 248 |
clock-latency-ns = <200000>; |
| 249 |
opp-peak-kBps = <1190400>; |
| 250 |
}; |
| 251 |
opp-1497600000 { |
| 252 |
opp-hz = /bits/ 64 <1497600000>; |
| 253 |
opp-supported-hw = <0x04>; |
| 254 |
clock-latency-ns = <200000>; |
| 255 |
opp-peak-kBps = <1305600>; |
| 256 |
}; |
| 257 |
opp-1593600000 { |
| 258 |
opp-hz = /bits/ 64 <1593600000>; |
| 259 |
opp-supported-hw = <0x9>; |
| 260 |
clock-latency-ns = <200000>; |
| 261 |
opp-peak-kBps = <1382400>; |
| 262 |
}; |
| 263 |
}; |
| 264 |
|
| 265 |
cluster1_opp: opp-table-cluster1 { |
| 266 |
compatible = "operating-points-v2-kryo-cpu"; |
| 267 |
nvmem-cells = <&speedbin_efuse>; |
| 268 |
opp-shared; |
| 269 |
|
| 270 |
/* Nominal fmax for now */ |
| 271 |
opp-307200000 { |
| 272 |
opp-hz = /bits/ 64 <307200000>; |
| 273 |
opp-supported-hw = <0xf>; |
| 274 |
clock-latency-ns = <200000>; |
| 275 |
opp-peak-kBps = <307200>; |
| 276 |
}; |
| 277 |
opp-403200000 { |
| 278 |
opp-hz = /bits/ 64 <403200000>; |
| 279 |
opp-supported-hw = <0xf>; |
| 280 |
clock-latency-ns = <200000>; |
| 281 |
opp-peak-kBps = <307200>; |
| 282 |
}; |
| 283 |
opp-480000000 { |
| 284 |
opp-hz = /bits/ 64 <480000000>; |
| 285 |
opp-supported-hw = <0xf>; |
| 286 |
clock-latency-ns = <200000>; |
| 287 |
opp-peak-kBps = <307200>; |
| 288 |
}; |
| 289 |
opp-556800000 { |
| 290 |
opp-hz = /bits/ 64 <556800000>; |
| 291 |
opp-supported-hw = <0xf>; |
| 292 |
clock-latency-ns = <200000>; |
| 293 |
opp-peak-kBps = <307200>; |
| 294 |
}; |
| 295 |
opp-652800000 { |
| 296 |
opp-hz = /bits/ 64 <652800000>; |
| 297 |
opp-supported-hw = <0xf>; |
| 298 |
clock-latency-ns = <200000>; |
| 299 |
opp-peak-kBps = <307200>; |
| 300 |
}; |
| 301 |
opp-729600000 { |
| 302 |
opp-hz = /bits/ 64 <729600000>; |
| 303 |
opp-supported-hw = <0xf>; |
| 304 |
clock-latency-ns = <200000>; |
| 305 |
opp-peak-kBps = <307200>; |
| 306 |
}; |
| 307 |
opp-806400000 { |
| 308 |
opp-hz = /bits/ 64 <806400000>; |
| 309 |
opp-supported-hw = <0xf>; |
| 310 |
clock-latency-ns = <200000>; |
| 311 |
opp-peak-kBps = <384000>; |
| 312 |
}; |
| 313 |
opp-883200000 { |
| 314 |
opp-hz = /bits/ 64 <883200000>; |
| 315 |
opp-supported-hw = <0xf>; |
| 316 |
clock-latency-ns = <200000>; |
| 317 |
opp-peak-kBps = <460800>; |
| 318 |
}; |
| 319 |
opp-940800000 { |
| 320 |
opp-hz = /bits/ 64 <940800000>; |
| 321 |
opp-supported-hw = <0xf>; |
| 322 |
clock-latency-ns = <200000>; |
| 323 |
opp-peak-kBps = <537600>; |
| 324 |
}; |
| 325 |
opp-1036800000 { |
| 326 |
opp-hz = /bits/ 64 <1036800000>; |
| 327 |
opp-supported-hw = <0xf>; |
| 328 |
clock-latency-ns = <200000>; |
| 329 |
opp-peak-kBps = <595200>; |
| 330 |
}; |
| 331 |
opp-1113600000 { |
| 332 |
opp-hz = /bits/ 64 <1113600000>; |
| 333 |
opp-supported-hw = <0xf>; |
| 334 |
clock-latency-ns = <200000>; |
| 335 |
opp-peak-kBps = <672000>; |
| 336 |
}; |
| 337 |
opp-1190400000 { |
| 338 |
opp-hz = /bits/ 64 <1190400000>; |
| 339 |
opp-supported-hw = <0xf>; |
| 340 |
clock-latency-ns = <200000>; |
| 341 |
opp-peak-kBps = <672000>; |
| 342 |
}; |
| 343 |
opp-1248000000 { |
| 344 |
opp-hz = /bits/ 64 <1248000000>; |
| 345 |
opp-supported-hw = <0xf>; |
| 346 |
clock-latency-ns = <200000>; |
| 347 |
opp-peak-kBps = <748800>; |
| 348 |
}; |
| 349 |
opp-1324800000 { |
| 350 |
opp-hz = /bits/ 64 <1324800000>; |
| 351 |
opp-supported-hw = <0xf>; |
| 352 |
clock-latency-ns = <200000>; |
| 353 |
opp-peak-kBps = <825600>; |
| 354 |
}; |
| 355 |
opp-1401600000 { |
| 356 |
opp-hz = /bits/ 64 <1401600000>; |
| 357 |
opp-supported-hw = <0xf>; |
| 358 |
clock-latency-ns = <200000>; |
| 359 |
opp-peak-kBps = <902400>; |
| 360 |
}; |
| 361 |
opp-1478400000 { |
| 362 |
opp-hz = /bits/ 64 <1478400000>; |
| 363 |
opp-supported-hw = <0xf>; |
| 364 |
clock-latency-ns = <200000>; |
| 365 |
opp-peak-kBps = <979200>; |
| 366 |
}; |
| 367 |
opp-1555200000 { |
| 368 |
opp-hz = /bits/ 64 <1555200000>; |
| 369 |
opp-supported-hw = <0xf>; |
| 370 |
clock-latency-ns = <200000>; |
| 371 |
opp-peak-kBps = <1056000>; |
| 372 |
}; |
| 373 |
opp-1632000000 { |
| 374 |
opp-hz = /bits/ 64 <1632000000>; |
| 375 |
opp-supported-hw = <0xf>; |
| 376 |
clock-latency-ns = <200000>; |
| 377 |
opp-peak-kBps = <1190400>; |
| 378 |
}; |
| 379 |
opp-1708800000 { |
| 380 |
opp-hz = /bits/ 64 <1708800000>; |
| 381 |
opp-supported-hw = <0xf>; |
| 382 |
clock-latency-ns = <200000>; |
| 383 |
opp-peak-kBps = <1228800>; |
| 384 |
}; |
| 385 |
opp-1785600000 { |
| 386 |
opp-hz = /bits/ 64 <1785600000>; |
| 387 |
opp-supported-hw = <0xf>; |
| 388 |
clock-latency-ns = <200000>; |
| 389 |
opp-peak-kBps = <1305600>; |
| 390 |
}; |
| 391 |
opp-1804800000 { |
| 392 |
opp-hz = /bits/ 64 <1804800000>; |
| 393 |
opp-supported-hw = <0xe>; |
| 394 |
clock-latency-ns = <200000>; |
| 395 |
opp-peak-kBps = <1305600>; |
| 396 |
}; |
| 397 |
opp-1824000000 { |
| 398 |
opp-hz = /bits/ 64 <1824000000>; |
| 399 |
opp-supported-hw = <0x1>; |
| 400 |
clock-latency-ns = <200000>; |
| 401 |
opp-peak-kBps = <1382400>; |
| 402 |
}; |
| 403 |
opp-1900800000 { |
| 404 |
opp-hz = /bits/ 64 <1900800000>; |
| 405 |
opp-supported-hw = <0x4>; |
| 406 |
clock-latency-ns = <200000>; |
| 407 |
opp-peak-kBps = <1305600>; |
| 408 |
}; |
| 409 |
opp-1920000000 { |
| 410 |
opp-hz = /bits/ 64 <1920000000>; |
| 411 |
opp-supported-hw = <0x1>; |
| 412 |
clock-latency-ns = <200000>; |
| 413 |
opp-peak-kBps = <1459200>; |
| 414 |
}; |
| 415 |
opp-1996800000 { |
| 416 |
opp-hz = /bits/ 64 <1996800000>; |
| 417 |
opp-supported-hw = <0x1>; |
| 418 |
clock-latency-ns = <200000>; |
| 419 |
opp-peak-kBps = <1593600>; |
| 420 |
}; |
| 421 |
opp-2073600000 { |
| 422 |
opp-hz = /bits/ 64 <2073600000>; |
| 423 |
opp-supported-hw = <0x1>; |
| 424 |
clock-latency-ns = <200000>; |
| 425 |
opp-peak-kBps = <1593600>; |
| 426 |
}; |
| 427 |
opp-2150400000 { |
| 428 |
opp-hz = /bits/ 64 <2150400000>; |
| 429 |
opp-supported-hw = <0x1>; |
| 430 |
clock-latency-ns = <200000>; |
| 431 |
opp-peak-kBps = <1593600>; |
| 432 |
}; |
| 433 |
}; |
| 434 |
|
| 435 |
firmware { |
| 436 |
scm { |
| 437 |
compatible = "qcom,scm-msm8996", "qcom,scm"; |
| 438 |
qcom,dload-mode = <&tcsr_2 0x13000>; |
| 439 |
}; |
| 440 |
}; |
| 441 |
|
| 442 |
memory@80000000 { |
| 443 |
device_type = "memory"; |
| 444 |
/* We expect the bootloader to fill in the reg */ |
| 445 |
reg = <0x0 0x80000000 0x0 0x0>; |
| 446 |
}; |
| 447 |
|
| 448 |
etm { |
| 449 |
compatible = "qcom,coresight-remote-etm"; |
| 450 |
|
| 451 |
out-ports { |
| 452 |
port { |
| 453 |
modem_etm_out_funnel_in2: endpoint { |
| 454 |
remote-endpoint = |
| 455 |
<&funnel_in2_in_modem_etm>; |
| 456 |
}; |
| 457 |
}; |
| 458 |
}; |
| 459 |
}; |
| 460 |
|
| 461 |
psci { |
| 462 |
compatible = "arm,psci-1.0"; |
| 463 |
method = "smc"; |
| 464 |
}; |
| 465 |
|
| 466 |
rpm: remoteproc { |
| 467 |
compatible = "qcom,msm8996-rpm-proc", "qcom,rpm-proc"; |
| 468 |
|
| 469 |
glink-edge { |
| 470 |
compatible = "qcom,glink-rpm"; |
| 471 |
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; |
| 472 |
qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| 473 |
mboxes = <&apcs_glb 0>; |
| 474 |
|
| 475 |
rpm_requests: rpm-requests { |
| 476 |
compatible = "qcom,rpm-msm8996", "qcom,glink-smd-rpm"; |
| 477 |
qcom,glink-channels = "rpm_requests"; |
| 478 |
|
| 479 |
rpmcc: clock-controller { |
| 480 |
compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc"; |
| 481 |
#clock-cells = <1>; |
| 482 |
clocks = <&xo_board>; |
| 483 |
clock-names = "xo"; |
| 484 |
}; |
| 485 |
|
| 486 |
rpmpd: power-controller { |
| 487 |
compatible = "qcom,msm8996-rpmpd"; |
| 488 |
#power-domain-cells = <1>; |
| 489 |
operating-points-v2 = <&rpmpd_opp_table>; |
| 490 |
|
| 491 |
rpmpd_opp_table: opp-table { |
| 492 |
compatible = "operating-points-v2"; |
| 493 |
|
| 494 |
rpmpd_opp1: opp1 { |
| 495 |
opp-level = <1>; |
| 496 |
}; |
| 497 |
|
| 498 |
rpmpd_opp2: opp2 { |
| 499 |
opp-level = <2>; |
| 500 |
}; |
| 501 |
|
| 502 |
rpmpd_opp3: opp3 { |
| 503 |
opp-level = <3>; |
| 504 |
}; |
| 505 |
|
| 506 |
rpmpd_opp4: opp4 { |
| 507 |
opp-level = <4>; |
| 508 |
}; |
| 509 |
|
| 510 |
rpmpd_opp5: opp5 { |
| 511 |
opp-level = <5>; |
| 512 |
}; |
| 513 |
|
| 514 |
rpmpd_opp6: opp6 { |
| 515 |
opp-level = <6>; |
| 516 |
}; |
| 517 |
}; |
| 518 |
}; |
| 519 |
}; |
| 520 |
}; |
| 521 |
}; |
| 522 |
|
| 523 |
reserved-memory { |
| 524 |
#address-cells = <2>; |
| 525 |
#size-cells = <2>; |
| 526 |
ranges; |
| 527 |
|
| 528 |
hyp_mem: memory@85800000 { |
| 529 |
reg = <0x0 0x85800000 0x0 0x600000>; |
| 530 |
no-map; |
| 531 |
}; |
| 532 |
|
| 533 |
xbl_mem: memory@85e00000 { |
| 534 |
reg = <0x0 0x85e00000 0x0 0x200000>; |
| 535 |
no-map; |
| 536 |
}; |
| 537 |
|
| 538 |
smem_mem: smem-mem@86000000 { |
| 539 |
reg = <0x0 0x86000000 0x0 0x200000>; |
| 540 |
no-map; |
| 541 |
}; |
| 542 |
|
| 543 |
tz_mem: memory@86200000 { |
| 544 |
reg = <0x0 0x86200000 0x0 0x2600000>; |
| 545 |
no-map; |
| 546 |
}; |
| 547 |
|
| 548 |
rmtfs_mem: rmtfs { |
| 549 |
compatible = "qcom,rmtfs-mem"; |
| 550 |
|
| 551 |
size = <0x0 0x200000>; |
| 552 |
alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; |
| 553 |
no-map; |
| 554 |
|
| 555 |
qcom,client-id = <1>; |
| 556 |
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; |
| 557 |
}; |
| 558 |
|
| 559 |
mpss_mem: mpss@88800000 { |
| 560 |
reg = <0x0 0x88800000 0x0 0x6200000>; |
| 561 |
no-map; |
| 562 |
}; |
| 563 |
|
| 564 |
adsp_mem: adsp@8ea00000 { |
| 565 |
reg = <0x0 0x8ea00000 0x0 0x1b00000>; |
| 566 |
no-map; |
| 567 |
}; |
| 568 |
|
| 569 |
slpi_mem: slpi@90500000 { |
| 570 |
reg = <0x0 0x90500000 0x0 0xa00000>; |
| 571 |
no-map; |
| 572 |
}; |
| 573 |
|
| 574 |
gpu_mem: gpu@90f00000 { |
| 575 |
compatible = "shared-dma-pool"; |
| 576 |
reg = <0x0 0x90f00000 0x0 0x100000>; |
| 577 |
no-map; |
| 578 |
}; |
| 579 |
|
| 580 |
venus_mem: venus@91000000 { |
| 581 |
reg = <0x0 0x91000000 0x0 0x500000>; |
| 582 |
no-map; |
| 583 |
}; |
| 584 |
|
| 585 |
mba_mem: mba@91500000 { |
| 586 |
reg = <0x0 0x91500000 0x0 0x200000>; |
| 587 |
no-map; |
| 588 |
}; |
| 589 |
|
| 590 |
mdata_mem: mpss-metadata { |
| 591 |
alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; |
| 592 |
size = <0x0 0x4000>; |
| 593 |
no-map; |
| 594 |
}; |
| 595 |
}; |
| 596 |
|
| 597 |
smem { |
| 598 |
compatible = "qcom,smem"; |
| 599 |
memory-region = <&smem_mem>; |
| 600 |
hwlocks = <&tcsr_mutex 3>; |
| 601 |
}; |
| 602 |
|
| 603 |
smp2p-adsp { |
| 604 |
compatible = "qcom,smp2p"; |
| 605 |
qcom,smem = <443>, <429>; |
| 606 |
|
| 607 |
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; |
| 608 |
|
| 609 |
mboxes = <&apcs_glb 10>; |
| 610 |
|
| 611 |
qcom,local-pid = <0>; |
| 612 |
qcom,remote-pid = <2>; |
| 613 |
|
| 614 |
adsp_smp2p_out: master-kernel { |
| 615 |
qcom,entry-name = "master-kernel"; |
| 616 |
#qcom,smem-state-cells = <1>; |
| 617 |
}; |
| 618 |
|
| 619 |
adsp_smp2p_in: slave-kernel { |
| 620 |
qcom,entry-name = "slave-kernel"; |
| 621 |
|
| 622 |
interrupt-controller; |
| 623 |
#interrupt-cells = <2>; |
| 624 |
}; |
| 625 |
}; |
| 626 |
|
| 627 |
smp2p-mpss { |
| 628 |
compatible = "qcom,smp2p"; |
| 629 |
qcom,smem = <435>, <428>; |
| 630 |
|
| 631 |
interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; |
| 632 |
|
| 633 |
mboxes = <&apcs_glb 14>; |
| 634 |
|
| 635 |
qcom,local-pid = <0>; |
| 636 |
qcom,remote-pid = <1>; |
| 637 |
|
| 638 |
mpss_smp2p_out: master-kernel { |
| 639 |
qcom,entry-name = "master-kernel"; |
| 640 |
#qcom,smem-state-cells = <1>; |
| 641 |
}; |
| 642 |
|
| 643 |
mpss_smp2p_in: slave-kernel { |
| 644 |
qcom,entry-name = "slave-kernel"; |
| 645 |
|
| 646 |
interrupt-controller; |
| 647 |
#interrupt-cells = <2>; |
| 648 |
}; |
| 649 |
}; |
| 650 |
|
| 651 |
smp2p-slpi { |
| 652 |
compatible = "qcom,smp2p"; |
| 653 |
qcom,smem = <481>, <430>; |
| 654 |
|
| 655 |
interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; |
| 656 |
|
| 657 |
mboxes = <&apcs_glb 26>; |
| 658 |
|
| 659 |
qcom,local-pid = <0>; |
| 660 |
qcom,remote-pid = <3>; |
| 661 |
|
| 662 |
slpi_smp2p_out: master-kernel { |
| 663 |
qcom,entry-name = "master-kernel"; |
| 664 |
#qcom,smem-state-cells = <1>; |
| 665 |
}; |
| 666 |
|
| 667 |
slpi_smp2p_in: slave-kernel { |
| 668 |
qcom,entry-name = "slave-kernel"; |
| 669 |
|
| 670 |
interrupt-controller; |
| 671 |
#interrupt-cells = <2>; |
| 672 |
}; |
| 673 |
}; |
| 674 |
|
| 675 |
soc: soc@0 { |
| 676 |
#address-cells = <1>; |
| 677 |
#size-cells = <1>; |
| 678 |
ranges = <0 0 0 0xffffffff>; |
| 679 |
compatible = "simple-bus"; |
| 680 |
|
| 681 |
pcie_phy: phy-wrapper@34000 { |
| 682 |
compatible = "qcom,msm8996-qmp-pcie-phy"; |
| 683 |
reg = <0x00034000 0x488>; |
| 684 |
#address-cells = <1>; |
| 685 |
#size-cells = <1>; |
| 686 |
ranges = <0x0 0x00034000 0x4000>; |
| 687 |
|
| 688 |
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, |
| 689 |
<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, |
| 690 |
<&gcc GCC_PCIE_CLKREF_CLK>; |
| 691 |
clock-names = "aux", "cfg_ahb", "ref"; |
| 692 |
|
| 693 |
resets = <&gcc GCC_PCIE_PHY_BCR>, |
| 694 |
<&gcc GCC_PCIE_PHY_COM_BCR>, |
| 695 |
<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; |
| 696 |
reset-names = "phy", "common", "cfg"; |
| 697 |
|
| 698 |
status = "disabled"; |
| 699 |
|
| 700 |
pciephy_0: phy@1000 { |
| 701 |
reg = <0x1000 0x130>, |
| 702 |
<0x1200 0x200>, |
| 703 |
<0x1400 0x1dc>; |
| 704 |
|
| 705 |
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; |
| 706 |
clock-names = "pipe0"; |
| 707 |
resets = <&gcc GCC_PCIE_0_PHY_BCR>; |
| 708 |
reset-names = "lane0"; |
| 709 |
|
| 710 |
#clock-cells = <0>; |
| 711 |
clock-output-names = "pcie_0_pipe_clk_src"; |
| 712 |
|
| 713 |
#phy-cells = <0>; |
| 714 |
}; |
| 715 |
|
| 716 |
pciephy_1: phy@2000 { |
| 717 |
reg = <0x2000 0x130>, |
| 718 |
<0x2200 0x200>, |
| 719 |
<0x2400 0x1dc>; |
| 720 |
|
| 721 |
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; |
| 722 |
clock-names = "pipe1"; |
| 723 |
resets = <&gcc GCC_PCIE_1_PHY_BCR>; |
| 724 |
reset-names = "lane1"; |
| 725 |
|
| 726 |
#clock-cells = <0>; |
| 727 |
clock-output-names = "pcie_1_pipe_clk_src"; |
| 728 |
|
| 729 |
#phy-cells = <0>; |
| 730 |
}; |
| 731 |
|
| 732 |
pciephy_2: phy@3000 { |
| 733 |
reg = <0x3000 0x130>, |
| 734 |
<0x3200 0x200>, |
| 735 |
<0x3400 0x1dc>; |
| 736 |
|
| 737 |
clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; |
| 738 |
clock-names = "pipe2"; |
| 739 |
resets = <&gcc GCC_PCIE_2_PHY_BCR>; |
| 740 |
reset-names = "lane2"; |
| 741 |
|
| 742 |
#clock-cells = <0>; |
| 743 |
clock-output-names = "pcie_2_pipe_clk_src"; |
| 744 |
|
| 745 |
#phy-cells = <0>; |
| 746 |
}; |
| 747 |
}; |
| 748 |
|
| 749 |
rpm_msg_ram: sram@68000 { |
| 750 |
compatible = "qcom,rpm-msg-ram"; |
| 751 |
reg = <0x00068000 0x6000>; |
| 752 |
}; |
| 753 |
|
| 754 |
qfprom@74000 { |
| 755 |
compatible = "qcom,msm8996-qfprom", "qcom,qfprom"; |
| 756 |
reg = <0x00074000 0x8ff>; |
| 757 |
#address-cells = <1>; |
| 758 |
#size-cells = <1>; |
| 759 |
|
| 760 |
qusb2p_hstx_trim: hstx-trim@24e { |
| 761 |
reg = <0x24e 0x2>; |
| 762 |
bits = <5 4>; |
| 763 |
}; |
| 764 |
|
| 765 |
qusb2s_hstx_trim: hstx-trim@24f { |
| 766 |
reg = <0x24f 0x1>; |
| 767 |
bits = <1 4>; |
| 768 |
}; |
| 769 |
|
| 770 |
speedbin_efuse: speedbin@133 { |
| 771 |
reg = <0x133 0x1>; |
| 772 |
bits = <5 3>; |
| 773 |
}; |
| 774 |
}; |
| 775 |
|
| 776 |
rng: rng@83000 { |
| 777 |
compatible = "qcom,prng-ee"; |
| 778 |
reg = <0x00083000 0x1000>; |
| 779 |
clocks = <&gcc GCC_PRNG_AHB_CLK>; |
| 780 |
clock-names = "core"; |
| 781 |
}; |
| 782 |
|
| 783 |
gcc: clock-controller@300000 { |
| 784 |
compatible = "qcom,gcc-msm8996"; |
| 785 |
#clock-cells = <1>; |
| 786 |
#reset-cells = <1>; |
| 787 |
#power-domain-cells = <1>; |
| 788 |
reg = <0x00300000 0x90000>; |
| 789 |
|
| 790 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| 791 |
<&rpmcc RPM_SMD_LN_BB_CLK>, |
| 792 |
<&sleep_clk>, |
| 793 |
<&pciephy_0>, |
| 794 |
<&pciephy_1>, |
| 795 |
<&pciephy_2>, |
| 796 |
<&usb3phy>, |
| 797 |
<&ufsphy 0>, |
| 798 |
<&ufsphy 1>, |
| 799 |
<&ufsphy 2>; |
| 800 |
clock-names = "cxo", |
| 801 |
"cxo2", |
| 802 |
"sleep_clk", |
| 803 |
"pcie_0_pipe_clk_src", |
| 804 |
"pcie_1_pipe_clk_src", |
| 805 |
"pcie_2_pipe_clk_src", |
| 806 |
"usb3_phy_pipe_clk_src", |
| 807 |
"ufs_rx_symbol_0_clk_src", |
| 808 |
"ufs_rx_symbol_1_clk_src", |
| 809 |
"ufs_tx_symbol_0_clk_src"; |
| 810 |
}; |
| 811 |
|
| 812 |
bimc: interconnect@408000 { |
| 813 |
compatible = "qcom,msm8996-bimc"; |
| 814 |
reg = <0x00408000 0x5a000>; |
| 815 |
#interconnect-cells = <1>; |
| 816 |
}; |
| 817 |
|
| 818 |
tsens0: thermal-sensor@4a9000 { |
| 819 |
compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; |
| 820 |
reg = <0x004a9000 0x1000>, /* TM */ |
| 821 |
<0x004a8000 0x1000>; /* SROT */ |
| 822 |
#qcom,sensors = <13>; |
| 823 |
interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, |
| 824 |
<GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; |
| 825 |
interrupt-names = "uplow", "critical"; |
| 826 |
#thermal-sensor-cells = <1>; |
| 827 |
}; |
| 828 |
|
| 829 |
tsens1: thermal-sensor@4ad000 { |
| 830 |
compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; |
| 831 |
reg = <0x004ad000 0x1000>, /* TM */ |
| 832 |
<0x004ac000 0x1000>; /* SROT */ |
| 833 |
#qcom,sensors = <8>; |
| 834 |
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, |
| 835 |
<GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; |
| 836 |
interrupt-names = "uplow", "critical"; |
| 837 |
#thermal-sensor-cells = <1>; |
| 838 |
}; |
| 839 |
|
| 840 |
cryptobam: dma-controller@644000 { |
| 841 |
compatible = "qcom,bam-v1.7.0"; |
| 842 |
reg = <0x00644000 0x24000>; |
| 843 |
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; |
| 844 |
clocks = <&gcc GCC_CE1_CLK>; |
| 845 |
clock-names = "bam_clk"; |
| 846 |
#dma-cells = <1>; |
| 847 |
qcom,ee = <0>; |
| 848 |
qcom,controlled-remotely; |
| 849 |
}; |
| 850 |
|
| 851 |
crypto: crypto@67a000 { |
| 852 |
compatible = "qcom,crypto-v5.4"; |
| 853 |
reg = <0x0067a000 0x6000>; |
| 854 |
clocks = <&gcc GCC_CE1_AHB_CLK>, |
| 855 |
<&gcc GCC_CE1_AXI_CLK>, |
| 856 |
<&gcc GCC_CE1_CLK>; |
| 857 |
clock-names = "iface", "bus", "core"; |
| 858 |
dmas = <&cryptobam 6>, <&cryptobam 7>; |
| 859 |
dma-names = "rx", "tx"; |
| 860 |
}; |
| 861 |
|
| 862 |
cnoc: interconnect@500000 { |
| 863 |
compatible = "qcom,msm8996-cnoc"; |
| 864 |
reg = <0x00500000 0x1000>; |
| 865 |
#interconnect-cells = <1>; |
| 866 |
}; |
| 867 |
|
| 868 |
snoc: interconnect@524000 { |
| 869 |
compatible = "qcom,msm8996-snoc"; |
| 870 |
reg = <0x00524000 0x1c000>; |
| 871 |
#interconnect-cells = <1>; |
| 872 |
}; |
| 873 |
|
| 874 |
a0noc: interconnect@543000 { |
| 875 |
compatible = "qcom,msm8996-a0noc"; |
| 876 |
reg = <0x00543000 0x6000>; |
| 877 |
#interconnect-cells = <1>; |
| 878 |
clock-names = "aggre0_snoc_axi", |
| 879 |
"aggre0_cnoc_ahb", |
| 880 |
"aggre0_noc_mpu_cfg"; |
| 881 |
clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>, |
| 882 |
<&gcc GCC_AGGRE0_CNOC_AHB_CLK>, |
| 883 |
<&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>; |
| 884 |
power-domains = <&gcc AGGRE0_NOC_GDSC>; |
| 885 |
}; |
| 886 |
|
| 887 |
a1noc: interconnect@562000 { |
| 888 |
compatible = "qcom,msm8996-a1noc"; |
| 889 |
reg = <0x00562000 0x5000>; |
| 890 |
#interconnect-cells = <1>; |
| 891 |
}; |
| 892 |
|
| 893 |
a2noc: interconnect@583000 { |
| 894 |
compatible = "qcom,msm8996-a2noc"; |
| 895 |
reg = <0x00583000 0x7000>; |
| 896 |
#interconnect-cells = <1>; |
| 897 |
clock-names = "aggre2_ufs_axi", "ufs_axi"; |
| 898 |
clocks = <&gcc GCC_AGGRE2_UFS_AXI_CLK>, |
| 899 |
<&gcc GCC_UFS_AXI_CLK>; |
| 900 |
}; |
| 901 |
|
| 902 |
mnoc: interconnect@5a4000 { |
| 903 |
compatible = "qcom,msm8996-mnoc"; |
| 904 |
reg = <0x005a4000 0x1c000>; |
| 905 |
#interconnect-cells = <1>; |
| 906 |
clock-names = "iface"; |
| 907 |
clocks = <&mmcc AHB_CLK_SRC>; |
| 908 |
}; |
| 909 |
|
| 910 |
pnoc: interconnect@5c0000 { |
| 911 |
compatible = "qcom,msm8996-pnoc"; |
| 912 |
reg = <0x005c0000 0x3000>; |
| 913 |
#interconnect-cells = <1>; |
| 914 |
}; |
| 915 |
|
| 916 |
tcsr_mutex: hwlock@740000 { |
| 917 |
compatible = "qcom,tcsr-mutex"; |
| 918 |
reg = <0x00740000 0x20000>; |
| 919 |
#hwlock-cells = <1>; |
| 920 |
}; |
| 921 |
|
| 922 |
tcsr_1: syscon@760000 { |
| 923 |
compatible = "qcom,tcsr-msm8996", "syscon"; |
| 924 |
reg = <0x00760000 0x20000>; |
| 925 |
}; |
| 926 |
|
| 927 |
tcsr_2: syscon@7a0000 { |
| 928 |
compatible = "qcom,tcsr-msm8996", "syscon"; |
| 929 |
reg = <0x007a0000 0x18000>; |
| 930 |
}; |
| 931 |
|
| 932 |
mmcc: clock-controller@8c0000 { |
| 933 |
compatible = "qcom,mmcc-msm8996"; |
| 934 |
#clock-cells = <1>; |
| 935 |
#reset-cells = <1>; |
| 936 |
#power-domain-cells = <1>; |
| 937 |
reg = <0x008c0000 0x40000>; |
| 938 |
clocks = <&xo_board>, |
| 939 |
<&gcc GPLL0>, |
| 940 |
<&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, |
| 941 |
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, |
| 942 |
<&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, |
| 943 |
<&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, |
| 944 |
<&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, |
| 945 |
<&mdss_hdmi_phy>; |
| 946 |
clock-names = "xo", |
| 947 |
"gpll0", |
| 948 |
"gcc_mmss_noc_cfg_ahb_clk", |
| 949 |
"dsi0pll", |
| 950 |
"dsi0pllbyte", |
| 951 |
"dsi1pll", |
| 952 |
"dsi1pllbyte", |
| 953 |
"hdmipll"; |
| 954 |
assigned-clocks = <&mmcc MMPLL9_PLL>, |
| 955 |
<&mmcc MMPLL1_PLL>, |
| 956 |
<&mmcc MMPLL3_PLL>, |
| 957 |
<&mmcc MMPLL4_PLL>, |
| 958 |
<&mmcc MMPLL5_PLL>; |
| 959 |
assigned-clock-rates = <624000000>, |
| 960 |
<810000000>, |
| 961 |
<980000000>, |
| 962 |
<960000000>, |
| 963 |
<825000000>; |
| 964 |
}; |
| 965 |
|
| 966 |
mdss: display-subsystem@900000 { |
| 967 |
compatible = "qcom,mdss"; |
| 968 |
|
| 969 |
reg = <0x00900000 0x1000>, |
| 970 |
<0x009b0000 0x1040>, |
| 971 |
<0x009b8000 0x1040>; |
| 972 |
reg-names = "mdss_phys", |
| 973 |
"vbif_phys", |
| 974 |
"vbif_nrt_phys"; |
| 975 |
|
| 976 |
power-domains = <&mmcc MDSS_GDSC>; |
| 977 |
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| 978 |
|
| 979 |
interrupt-controller; |
| 980 |
#interrupt-cells = <1>; |
| 981 |
|
| 982 |
clocks = <&mmcc MDSS_AHB_CLK>, |
| 983 |
<&mmcc MDSS_MDP_CLK>; |
| 984 |
clock-names = "iface", "core"; |
| 985 |
|
| 986 |
resets = <&mmcc MDSS_BCR>; |
| 987 |
|
| 988 |
#address-cells = <1>; |
| 989 |
#size-cells = <1>; |
| 990 |
ranges; |
| 991 |
|
| 992 |
status = "disabled"; |
| 993 |
|
| 994 |
mdp: display-controller@901000 { |
| 995 |
compatible = "qcom,msm8996-mdp5", "qcom,mdp5"; |
| 996 |
reg = <0x00901000 0x90000>; |
| 997 |
reg-names = "mdp_phys"; |
| 998 |
|
| 999 |
interrupt-parent = <&mdss>; |
| 1000 |
interrupts = <0>; |
| 1001 |
|
| 1002 |
clocks = <&mmcc MDSS_AHB_CLK>, |
| 1003 |
<&mmcc MDSS_AXI_CLK>, |
| 1004 |
<&mmcc MDSS_MDP_CLK>, |
| 1005 |
<&mmcc SMMU_MDP_AXI_CLK>, |
| 1006 |
<&mmcc MDSS_VSYNC_CLK>; |
| 1007 |
clock-names = "iface", |
| 1008 |
"bus", |
| 1009 |
"core", |
| 1010 |
"iommu", |
| 1011 |
"vsync"; |
| 1012 |
|
| 1013 |
iommus = <&mdp_smmu 0>; |
| 1014 |
|
| 1015 |
assigned-clocks = <&mmcc MDSS_MDP_CLK>, |
| 1016 |
<&mmcc MDSS_VSYNC_CLK>; |
| 1017 |
assigned-clock-rates = <300000000>, |
| 1018 |
<19200000>; |
| 1019 |
|
| 1020 |
interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, |
| 1021 |
<&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>, |
| 1022 |
<&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>; |
| 1023 |
interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem"; |
| 1024 |
|
| 1025 |
ports { |
| 1026 |
#address-cells = <1>; |
| 1027 |
#size-cells = <0>; |
| 1028 |
|
| 1029 |
port@0 { |
| 1030 |
reg = <0>; |
| 1031 |
mdp5_intf3_out: endpoint { |
| 1032 |
remote-endpoint = <&mdss_hdmi_in>; |
| 1033 |
}; |
| 1034 |
}; |
| 1035 |
|
| 1036 |
port@1 { |
| 1037 |
reg = <1>; |
| 1038 |
mdp5_intf1_out: endpoint { |
| 1039 |
remote-endpoint = <&mdss_dsi0_in>; |
| 1040 |
}; |
| 1041 |
}; |
| 1042 |
|
| 1043 |
port@2 { |
| 1044 |
reg = <2>; |
| 1045 |
mdp5_intf2_out: endpoint { |
| 1046 |
remote-endpoint = <&mdss_dsi1_in>; |
| 1047 |
}; |
| 1048 |
}; |
| 1049 |
}; |
| 1050 |
}; |
| 1051 |
|
| 1052 |
mdss_dsi0: dsi@994000 { |
| 1053 |
compatible = "qcom,msm8996-dsi-ctrl", |
| 1054 |
"qcom,mdss-dsi-ctrl"; |
| 1055 |
reg = <0x00994000 0x400>; |
| 1056 |
reg-names = "dsi_ctrl"; |
| 1057 |
|
| 1058 |
interrupt-parent = <&mdss>; |
| 1059 |
interrupts = <4>; |
| 1060 |
|
| 1061 |
clocks = <&mmcc MDSS_MDP_CLK>, |
| 1062 |
<&mmcc MDSS_BYTE0_CLK>, |
| 1063 |
<&mmcc MDSS_AHB_CLK>, |
| 1064 |
<&mmcc MDSS_AXI_CLK>, |
| 1065 |
<&mmcc MMSS_MISC_AHB_CLK>, |
| 1066 |
<&mmcc MDSS_PCLK0_CLK>, |
| 1067 |
<&mmcc MDSS_ESC0_CLK>; |
| 1068 |
clock-names = "mdp_core", |
| 1069 |
"byte", |
| 1070 |
"iface", |
| 1071 |
"bus", |
| 1072 |
"core_mmss", |
| 1073 |
"pixel", |
| 1074 |
"core"; |
| 1075 |
assigned-clocks = <&mmcc BYTE0_CLK_SRC>, |
| 1076 |
<&mmcc PCLK0_CLK_SRC>; |
| 1077 |
assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, |
| 1078 |
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; |
| 1079 |
|
| 1080 |
phys = <&mdss_dsi0_phy>; |
| 1081 |
status = "disabled"; |
| 1082 |
|
| 1083 |
#address-cells = <1>; |
| 1084 |
#size-cells = <0>; |
| 1085 |
|
| 1086 |
ports { |
| 1087 |
#address-cells = <1>; |
| 1088 |
#size-cells = <0>; |
| 1089 |
|
| 1090 |
port@0 { |
| 1091 |
reg = <0>; |
| 1092 |
mdss_dsi0_in: endpoint { |
| 1093 |
remote-endpoint = <&mdp5_intf1_out>; |
| 1094 |
}; |
| 1095 |
}; |
| 1096 |
|
| 1097 |
port@1 { |
| 1098 |
reg = <1>; |
| 1099 |
mdss_dsi0_out: endpoint { |
| 1100 |
}; |
| 1101 |
}; |
| 1102 |
}; |
| 1103 |
}; |
| 1104 |
|
| 1105 |
mdss_dsi0_phy: phy@994400 { |
| 1106 |
compatible = "qcom,dsi-phy-14nm"; |
| 1107 |
reg = <0x00994400 0x100>, |
| 1108 |
<0x00994500 0x300>, |
| 1109 |
<0x00994800 0x188>; |
| 1110 |
reg-names = "dsi_phy", |
| 1111 |
"dsi_phy_lane", |
| 1112 |
"dsi_pll"; |
| 1113 |
|
| 1114 |
#clock-cells = <1>; |
| 1115 |
#phy-cells = <0>; |
| 1116 |
|
| 1117 |
clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 1118 |
clock-names = "iface", "ref"; |
| 1119 |
status = "disabled"; |
| 1120 |
}; |
| 1121 |
|
| 1122 |
mdss_dsi1: dsi@996000 { |
| 1123 |
compatible = "qcom,msm8996-dsi-ctrl", |
| 1124 |
"qcom,mdss-dsi-ctrl"; |
| 1125 |
reg = <0x00996000 0x400>; |
| 1126 |
reg-names = "dsi_ctrl"; |
| 1127 |
|
| 1128 |
interrupt-parent = <&mdss>; |
| 1129 |
interrupts = <5>; |
| 1130 |
|
| 1131 |
clocks = <&mmcc MDSS_MDP_CLK>, |
| 1132 |
<&mmcc MDSS_BYTE1_CLK>, |
| 1133 |
<&mmcc MDSS_AHB_CLK>, |
| 1134 |
<&mmcc MDSS_AXI_CLK>, |
| 1135 |
<&mmcc MMSS_MISC_AHB_CLK>, |
| 1136 |
<&mmcc MDSS_PCLK1_CLK>, |
| 1137 |
<&mmcc MDSS_ESC1_CLK>; |
| 1138 |
clock-names = "mdp_core", |
| 1139 |
"byte", |
| 1140 |
"iface", |
| 1141 |
"bus", |
| 1142 |
"core_mmss", |
| 1143 |
"pixel", |
| 1144 |
"core"; |
| 1145 |
assigned-clocks = <&mmcc BYTE1_CLK_SRC>, |
| 1146 |
<&mmcc PCLK1_CLK_SRC>; |
| 1147 |
assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, |
| 1148 |
<&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>; |
| 1149 |
|
| 1150 |
phys = <&mdss_dsi1_phy>; |
| 1151 |
status = "disabled"; |
| 1152 |
|
| 1153 |
#address-cells = <1>; |
| 1154 |
#size-cells = <0>; |
| 1155 |
|
| 1156 |
ports { |
| 1157 |
#address-cells = <1>; |
| 1158 |
#size-cells = <0>; |
| 1159 |
|
| 1160 |
port@0 { |
| 1161 |
reg = <0>; |
| 1162 |
mdss_dsi1_in: endpoint { |
| 1163 |
remote-endpoint = <&mdp5_intf2_out>; |
| 1164 |
}; |
| 1165 |
}; |
| 1166 |
|
| 1167 |
port@1 { |
| 1168 |
reg = <1>; |
| 1169 |
mdss_dsi1_out: endpoint { |
| 1170 |
}; |
| 1171 |
}; |
| 1172 |
}; |
| 1173 |
}; |
| 1174 |
|
| 1175 |
mdss_dsi1_phy: phy@996400 { |
| 1176 |
compatible = "qcom,dsi-phy-14nm"; |
| 1177 |
reg = <0x00996400 0x100>, |
| 1178 |
<0x00996500 0x300>, |
| 1179 |
<0x00996800 0x188>; |
| 1180 |
reg-names = "dsi_phy", |
| 1181 |
"dsi_phy_lane", |
| 1182 |
"dsi_pll"; |
| 1183 |
|
| 1184 |
#clock-cells = <1>; |
| 1185 |
#phy-cells = <0>; |
| 1186 |
|
| 1187 |
clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 1188 |
clock-names = "iface", "ref"; |
| 1189 |
status = "disabled"; |
| 1190 |
}; |
| 1191 |
|
| 1192 |
mdss_hdmi: hdmi-tx@9a0000 { |
| 1193 |
compatible = "qcom,hdmi-tx-8996"; |
| 1194 |
reg = <0x009a0000 0x50c>, |
| 1195 |
<0x00070000 0x6158>, |
| 1196 |
<0x009e0000 0xfff>; |
| 1197 |
reg-names = "core_physical", |
| 1198 |
"qfprom_physical", |
| 1199 |
"hdcp_physical"; |
| 1200 |
|
| 1201 |
interrupt-parent = <&mdss>; |
| 1202 |
interrupts = <8>; |
| 1203 |
|
| 1204 |
clocks = <&mmcc MDSS_MDP_CLK>, |
| 1205 |
<&mmcc MDSS_AHB_CLK>, |
| 1206 |
<&mmcc MDSS_HDMI_CLK>, |
| 1207 |
<&mmcc MDSS_HDMI_AHB_CLK>, |
| 1208 |
<&mmcc MDSS_EXTPCLK_CLK>; |
| 1209 |
clock-names = |
| 1210 |
"mdp_core", |
| 1211 |
"iface", |
| 1212 |
"core", |
| 1213 |
"alt_iface", |
| 1214 |
"extp"; |
| 1215 |
|
| 1216 |
phys = <&mdss_hdmi_phy>; |
| 1217 |
#sound-dai-cells = <1>; |
| 1218 |
|
| 1219 |
status = "disabled"; |
| 1220 |
|
| 1221 |
ports { |
| 1222 |
#address-cells = <1>; |
| 1223 |
#size-cells = <0>; |
| 1224 |
|
| 1225 |
port@0 { |
| 1226 |
reg = <0>; |
| 1227 |
mdss_hdmi_in: endpoint { |
| 1228 |
remote-endpoint = <&mdp5_intf3_out>; |
| 1229 |
}; |
| 1230 |
}; |
| 1231 |
}; |
| 1232 |
}; |
| 1233 |
|
| 1234 |
mdss_hdmi_phy: phy@9a0600 { |
| 1235 |
#phy-cells = <0>; |
| 1236 |
compatible = "qcom,hdmi-phy-8996"; |
| 1237 |
reg = <0x009a0600 0x1c4>, |
| 1238 |
<0x009a0a00 0x124>, |
| 1239 |
<0x009a0c00 0x124>, |
| 1240 |
<0x009a0e00 0x124>, |
| 1241 |
<0x009a1000 0x124>, |
| 1242 |
<0x009a1200 0x0c8>; |
| 1243 |
reg-names = "hdmi_pll", |
| 1244 |
"hdmi_tx_l0", |
| 1245 |
"hdmi_tx_l1", |
| 1246 |
"hdmi_tx_l2", |
| 1247 |
"hdmi_tx_l3", |
| 1248 |
"hdmi_phy"; |
| 1249 |
|
| 1250 |
clocks = <&mmcc MDSS_AHB_CLK>, |
| 1251 |
<&gcc GCC_HDMI_CLKREF_CLK>, |
| 1252 |
<&xo_board>; |
| 1253 |
clock-names = "iface", |
| 1254 |
"ref", |
| 1255 |
"xo"; |
| 1256 |
|
| 1257 |
#clock-cells = <0>; |
| 1258 |
|
| 1259 |
status = "disabled"; |
| 1260 |
}; |
| 1261 |
}; |
| 1262 |
|
| 1263 |
gpu: gpu@b00000 { |
| 1264 |
compatible = "qcom,adreno-530.2", "qcom,adreno"; |
| 1265 |
|
| 1266 |
reg = <0x00b00000 0x3f000>; |
| 1267 |
reg-names = "kgsl_3d0_reg_memory"; |
| 1268 |
|
| 1269 |
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; |
| 1270 |
|
| 1271 |
clocks = <&mmcc GPU_GX_GFX3D_CLK>, |
| 1272 |
<&mmcc GPU_AHB_CLK>, |
| 1273 |
<&mmcc GPU_GX_RBBMTIMER_CLK>, |
| 1274 |
<&gcc GCC_BIMC_GFX_CLK>, |
| 1275 |
<&gcc GCC_MMSS_BIMC_GFX_CLK>; |
| 1276 |
|
| 1277 |
clock-names = "core", |
| 1278 |
"iface", |
| 1279 |
"rbbmtimer", |
| 1280 |
"mem", |
| 1281 |
"mem_iface"; |
| 1282 |
|
| 1283 |
interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>; |
| 1284 |
interconnect-names = "gfx-mem"; |
| 1285 |
|
| 1286 |
power-domains = <&mmcc GPU_GX_GDSC>; |
| 1287 |
iommus = <&adreno_smmu 0>; |
| 1288 |
|
| 1289 |
nvmem-cells = <&speedbin_efuse>; |
| 1290 |
nvmem-cell-names = "speed_bin"; |
| 1291 |
|
| 1292 |
operating-points-v2 = <&gpu_opp_table>; |
| 1293 |
|
| 1294 |
status = "disabled"; |
| 1295 |
|
| 1296 |
#cooling-cells = <2>; |
| 1297 |
|
| 1298 |
gpu_opp_table: opp-table { |
| 1299 |
compatible = "operating-points-v2"; |
| 1300 |
|
| 1301 |
/* |
| 1302 |
* 624Mhz is only available on speed bins 0 and 3. |
| 1303 |
* 560Mhz is only available on speed bins 0, 2 and 3. |
| 1304 |
* All the rest are available on all bins of the hardware. |
| 1305 |
*/ |
| 1306 |
opp-624000000 { |
| 1307 |
opp-hz = /bits/ 64 <624000000>; |
| 1308 |
opp-supported-hw = <0x09>; |
| 1309 |
}; |
| 1310 |
opp-560000000 { |
| 1311 |
opp-hz = /bits/ 64 <560000000>; |
| 1312 |
opp-supported-hw = <0x0d>; |
| 1313 |
}; |
| 1314 |
opp-510000000 { |
| 1315 |
opp-hz = /bits/ 64 <510000000>; |
| 1316 |
opp-supported-hw = <0xff>; |
| 1317 |
}; |
| 1318 |
opp-401800000 { |
| 1319 |
opp-hz = /bits/ 64 <401800000>; |
| 1320 |
opp-supported-hw = <0xff>; |
| 1321 |
}; |
| 1322 |
opp-315000000 { |
| 1323 |
opp-hz = /bits/ 64 <315000000>; |
| 1324 |
opp-supported-hw = <0xff>; |
| 1325 |
}; |
| 1326 |
opp-214000000 { |
| 1327 |
opp-hz = /bits/ 64 <214000000>; |
| 1328 |
opp-supported-hw = <0xff>; |
| 1329 |
}; |
| 1330 |
opp-133000000 { |
| 1331 |
opp-hz = /bits/ 64 <133000000>; |
| 1332 |
opp-supported-hw = <0xff>; |
| 1333 |
}; |
| 1334 |
}; |
| 1335 |
|
| 1336 |
gpu_zap_shader: zap-shader { |
| 1337 |
memory-region = <&gpu_mem>; |
| 1338 |
}; |
| 1339 |
}; |
| 1340 |
|
| 1341 |
tlmm: pinctrl@1010000 { |
| 1342 |
compatible = "qcom,msm8996-pinctrl"; |
| 1343 |
reg = <0x01010000 0x300000>; |
| 1344 |
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| 1345 |
gpio-controller; |
| 1346 |
gpio-ranges = <&tlmm 0 0 150>; |
| 1347 |
#gpio-cells = <2>; |
| 1348 |
interrupt-controller; |
| 1349 |
#interrupt-cells = <2>; |
| 1350 |
|
| 1351 |
blsp1_spi1_default: blsp1-spi1-default-state { |
| 1352 |
spi-pins { |
| 1353 |
pins = "gpio0", "gpio1", "gpio3"; |
| 1354 |
function = "blsp_spi1"; |
| 1355 |
drive-strength = <12>; |
| 1356 |
bias-disable; |
| 1357 |
}; |
| 1358 |
|
| 1359 |
cs-pins { |
| 1360 |
pins = "gpio2"; |
| 1361 |
function = "gpio"; |
| 1362 |
drive-strength = <16>; |
| 1363 |
bias-disable; |
| 1364 |
output-high; |
| 1365 |
}; |
| 1366 |
}; |
| 1367 |
|
| 1368 |
blsp1_spi1_sleep: blsp1-spi1-sleep-state { |
| 1369 |
pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| 1370 |
function = "gpio"; |
| 1371 |
drive-strength = <2>; |
| 1372 |
bias-pull-down; |
| 1373 |
}; |
| 1374 |
|
| 1375 |
blsp2_uart2_2pins_default: blsp2-uart2-2pins-state { |
| 1376 |
pins = "gpio4", "gpio5"; |
| 1377 |
function = "blsp_uart8"; |
| 1378 |
drive-strength = <16>; |
| 1379 |
bias-disable; |
| 1380 |
}; |
| 1381 |
|
| 1382 |
blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep-state { |
| 1383 |
pins = "gpio4", "gpio5"; |
| 1384 |
function = "gpio"; |
| 1385 |
drive-strength = <2>; |
| 1386 |
bias-disable; |
| 1387 |
}; |
| 1388 |
|
| 1389 |
blsp2_i2c2_default: blsp2-i2c2-state { |
| 1390 |
pins = "gpio6", "gpio7"; |
| 1391 |
function = "blsp_i2c8"; |
| 1392 |
drive-strength = <16>; |
| 1393 |
bias-disable; |
| 1394 |
}; |
| 1395 |
|
| 1396 |
blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { |
| 1397 |
pins = "gpio6", "gpio7"; |
| 1398 |
function = "gpio"; |
| 1399 |
drive-strength = <2>; |
| 1400 |
bias-disable; |
| 1401 |
}; |
| 1402 |
|
| 1403 |
blsp1_i2c6_default: blsp1-i2c6-state { |
| 1404 |
pins = "gpio27", "gpio28"; |
| 1405 |
function = "blsp_i2c6"; |
| 1406 |
drive-strength = <16>; |
| 1407 |
bias-disable; |
| 1408 |
}; |
| 1409 |
|
| 1410 |
blsp1_i2c6_sleep: blsp1-i2c6-sleep-state { |
| 1411 |
pins = "gpio27", "gpio28"; |
| 1412 |
function = "gpio"; |
| 1413 |
drive-strength = <2>; |
| 1414 |
bias-pull-up; |
| 1415 |
}; |
| 1416 |
|
| 1417 |
cci0_default: cci0-default-state { |
| 1418 |
pins = "gpio17", "gpio18"; |
| 1419 |
function = "cci_i2c"; |
| 1420 |
drive-strength = <16>; |
| 1421 |
bias-disable; |
| 1422 |
}; |
| 1423 |
|
| 1424 |
camera0_state_on: |
| 1425 |
camera_rear_default: camera-rear-default-state { |
| 1426 |
camera0_mclk: mclk0-pins { |
| 1427 |
pins = "gpio13"; |
| 1428 |
function = "cam_mclk"; |
| 1429 |
drive-strength = <16>; |
| 1430 |
bias-disable; |
| 1431 |
}; |
| 1432 |
|
| 1433 |
camera0_rst: rst-pins { |
| 1434 |
pins = "gpio25"; |
| 1435 |
function = "gpio"; |
| 1436 |
drive-strength = <16>; |
| 1437 |
bias-disable; |
| 1438 |
}; |
| 1439 |
|
| 1440 |
camera0_pwdn: pwdn-pins { |
| 1441 |
pins = "gpio26"; |
| 1442 |
function = "gpio"; |
| 1443 |
drive-strength = <16>; |
| 1444 |
bias-disable; |
| 1445 |
}; |
| 1446 |
}; |
| 1447 |
|
| 1448 |
cci1_default: cci1-default-state { |
| 1449 |
pins = "gpio19", "gpio20"; |
| 1450 |
function = "cci_i2c"; |
| 1451 |
drive-strength = <16>; |
| 1452 |
bias-disable; |
| 1453 |
}; |
| 1454 |
|
| 1455 |
camera1_state_on: |
| 1456 |
camera_board_default: camera-board-default-state { |
| 1457 |
mclk1-pins { |
| 1458 |
pins = "gpio14"; |
| 1459 |
function = "cam_mclk"; |
| 1460 |
drive-strength = <16>; |
| 1461 |
bias-disable; |
| 1462 |
}; |
| 1463 |
|
| 1464 |
pwdn-pins { |
| 1465 |
pins = "gpio98"; |
| 1466 |
function = "gpio"; |
| 1467 |
drive-strength = <16>; |
| 1468 |
bias-disable; |
| 1469 |
}; |
| 1470 |
|
| 1471 |
rst-pins { |
| 1472 |
pins = "gpio104"; |
| 1473 |
function = "gpio"; |
| 1474 |
drive-strength = <16>; |
| 1475 |
bias-disable; |
| 1476 |
}; |
| 1477 |
}; |
| 1478 |
|
| 1479 |
camera2_state_on: |
| 1480 |
camera_front_default: camera-front-default-state { |
| 1481 |
camera2_mclk: mclk2-pins { |
| 1482 |
pins = "gpio15"; |
| 1483 |
function = "cam_mclk"; |
| 1484 |
drive-strength = <16>; |
| 1485 |
bias-disable; |
| 1486 |
}; |
| 1487 |
|
| 1488 |
camera2_rst: rst-pins { |
| 1489 |
pins = "gpio23"; |
| 1490 |
function = "gpio"; |
| 1491 |
drive-strength = <16>; |
| 1492 |
bias-disable; |
| 1493 |
}; |
| 1494 |
|
| 1495 |
pwdn-pins { |
| 1496 |
pins = "gpio133"; |
| 1497 |
function = "gpio"; |
| 1498 |
drive-strength = <16>; |
| 1499 |
bias-disable; |
| 1500 |
}; |
| 1501 |
}; |
| 1502 |
|
| 1503 |
pcie0_state_on: pcie0-state-on-state { |
| 1504 |
perst-pins { |
| 1505 |
pins = "gpio35"; |
| 1506 |
function = "gpio"; |
| 1507 |
drive-strength = <2>; |
| 1508 |
bias-pull-down; |
| 1509 |
}; |
| 1510 |
|
| 1511 |
clkreq-pins { |
| 1512 |
pins = "gpio36"; |
| 1513 |
function = "pci_e0"; |
| 1514 |
drive-strength = <2>; |
| 1515 |
bias-pull-up; |
| 1516 |
}; |
| 1517 |
|
| 1518 |
wake-pins { |
| 1519 |
pins = "gpio37"; |
| 1520 |
function = "gpio"; |
| 1521 |
drive-strength = <2>; |
| 1522 |
bias-pull-up; |
| 1523 |
}; |
| 1524 |
}; |
| 1525 |
|
| 1526 |
pcie0_state_off: pcie0-state-off-state { |
| 1527 |
perst-pins { |
| 1528 |
pins = "gpio35"; |
| 1529 |
function = "gpio"; |
| 1530 |
drive-strength = <2>; |
| 1531 |
bias-pull-down; |
| 1532 |
}; |
| 1533 |
|
| 1534 |
clkreq-pins { |
| 1535 |
pins = "gpio36"; |
| 1536 |
function = "gpio"; |
| 1537 |
drive-strength = <2>; |
| 1538 |
bias-disable; |
| 1539 |
}; |
| 1540 |
|
| 1541 |
wake-pins { |
| 1542 |
pins = "gpio37"; |
| 1543 |
function = "gpio"; |
| 1544 |
drive-strength = <2>; |
| 1545 |
bias-disable; |
| 1546 |
}; |
| 1547 |
}; |
| 1548 |
|
| 1549 |
blsp1_uart2_default: blsp1-uart2-default-state { |
| 1550 |
pins = "gpio41", "gpio42", "gpio43", "gpio44"; |
| 1551 |
function = "blsp_uart2"; |
| 1552 |
drive-strength = <16>; |
| 1553 |
bias-disable; |
| 1554 |
}; |
| 1555 |
|
| 1556 |
blsp1_uart2_sleep: blsp1-uart2-sleep-state { |
| 1557 |
pins = "gpio41", "gpio42", "gpio43", "gpio44"; |
| 1558 |
function = "gpio"; |
| 1559 |
drive-strength = <2>; |
| 1560 |
bias-disable; |
| 1561 |
}; |
| 1562 |
|
| 1563 |
blsp1_i2c3_default: blsp1-i2c3-default-state { |
| 1564 |
pins = "gpio47", "gpio48"; |
| 1565 |
function = "blsp_i2c3"; |
| 1566 |
drive-strength = <16>; |
| 1567 |
bias-disable; |
| 1568 |
}; |
| 1569 |
|
| 1570 |
blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { |
| 1571 |
pins = "gpio47", "gpio48"; |
| 1572 |
function = "gpio"; |
| 1573 |
drive-strength = <2>; |
| 1574 |
bias-disable; |
| 1575 |
}; |
| 1576 |
|
| 1577 |
blsp2_uart3_4pins_default: blsp2-uart3-4pins-state { |
| 1578 |
pins = "gpio49", "gpio50", "gpio51", "gpio52"; |
| 1579 |
function = "blsp_uart9"; |
| 1580 |
drive-strength = <16>; |
| 1581 |
bias-disable; |
| 1582 |
}; |
| 1583 |
|
| 1584 |
blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep-state { |
| 1585 |
pins = "gpio49", "gpio50", "gpio51", "gpio52"; |
| 1586 |
function = "blsp_uart9"; |
| 1587 |
drive-strength = <2>; |
| 1588 |
bias-disable; |
| 1589 |
}; |
| 1590 |
|
| 1591 |
blsp2_i2c3_default: blsp2-i2c3-state-state { |
| 1592 |
pins = "gpio51", "gpio52"; |
| 1593 |
function = "blsp_i2c9"; |
| 1594 |
drive-strength = <16>; |
| 1595 |
bias-disable; |
| 1596 |
}; |
| 1597 |
|
| 1598 |
blsp2_i2c3_sleep: blsp2-i2c3-sleep-state { |
| 1599 |
pins = "gpio51", "gpio52"; |
| 1600 |
function = "gpio"; |
| 1601 |
drive-strength = <2>; |
| 1602 |
bias-disable; |
| 1603 |
}; |
| 1604 |
|
| 1605 |
wcd_intr_default: wcd-intr-default-state { |
| 1606 |
pins = "gpio54"; |
| 1607 |
function = "gpio"; |
| 1608 |
drive-strength = <2>; |
| 1609 |
bias-pull-down; |
| 1610 |
}; |
| 1611 |
|
| 1612 |
blsp2_i2c1_default: blsp2-i2c1-state { |
| 1613 |
pins = "gpio55", "gpio56"; |
| 1614 |
function = "blsp_i2c7"; |
| 1615 |
drive-strength = <16>; |
| 1616 |
bias-disable; |
| 1617 |
}; |
| 1618 |
|
| 1619 |
blsp2_i2c1_sleep: blsp2-i2c1-sleep-state { |
| 1620 |
pins = "gpio55", "gpio56"; |
| 1621 |
function = "gpio"; |
| 1622 |
drive-strength = <2>; |
| 1623 |
bias-disable; |
| 1624 |
}; |
| 1625 |
|
| 1626 |
blsp2_i2c5_default: blsp2-i2c5-state { |
| 1627 |
pins = "gpio60", "gpio61"; |
| 1628 |
function = "blsp_i2c11"; |
| 1629 |
drive-strength = <2>; |
| 1630 |
bias-disable; |
| 1631 |
}; |
| 1632 |
|
| 1633 |
/* Sleep state for BLSP2_I2C5 is missing.. */ |
| 1634 |
|
| 1635 |
cdc_reset_active: cdc-reset-active-state { |
| 1636 |
pins = "gpio64"; |
| 1637 |
function = "gpio"; |
| 1638 |
drive-strength = <16>; |
| 1639 |
bias-pull-down; |
| 1640 |
output-high; |
| 1641 |
}; |
| 1642 |
|
| 1643 |
cdc_reset_sleep: cdc-reset-sleep-state { |
| 1644 |
pins = "gpio64"; |
| 1645 |
function = "gpio"; |
| 1646 |
drive-strength = <16>; |
| 1647 |
bias-disable; |
| 1648 |
output-low; |
| 1649 |
}; |
| 1650 |
|
| 1651 |
blsp2_spi6_default: blsp2-spi6-default-state { |
| 1652 |
spi-pins { |
| 1653 |
pins = "gpio85", "gpio86", "gpio88"; |
| 1654 |
function = "blsp_spi12"; |
| 1655 |
drive-strength = <12>; |
| 1656 |
bias-disable; |
| 1657 |
}; |
| 1658 |
|
| 1659 |
cs-pins { |
| 1660 |
pins = "gpio87"; |
| 1661 |
function = "gpio"; |
| 1662 |
drive-strength = <16>; |
| 1663 |
bias-disable; |
| 1664 |
output-high; |
| 1665 |
}; |
| 1666 |
}; |
| 1667 |
|
| 1668 |
blsp2_spi6_sleep: blsp2-spi6-sleep-state { |
| 1669 |
pins = "gpio85", "gpio86", "gpio87", "gpio88"; |
| 1670 |
function = "gpio"; |
| 1671 |
drive-strength = <2>; |
| 1672 |
bias-pull-down; |
| 1673 |
}; |
| 1674 |
|
| 1675 |
blsp2_i2c6_default: blsp2-i2c6-state { |
| 1676 |
pins = "gpio87", "gpio88"; |
| 1677 |
function = "blsp_i2c12"; |
| 1678 |
drive-strength = <16>; |
| 1679 |
bias-disable; |
| 1680 |
}; |
| 1681 |
|
| 1682 |
blsp2_i2c6_sleep: blsp2-i2c6-sleep-state { |
| 1683 |
pins = "gpio87", "gpio88"; |
| 1684 |
function = "gpio"; |
| 1685 |
drive-strength = <2>; |
| 1686 |
bias-disable; |
| 1687 |
}; |
| 1688 |
|
| 1689 |
pcie1_state_on: pcie1-on-state { |
| 1690 |
perst-pins { |
| 1691 |
pins = "gpio130"; |
| 1692 |
function = "gpio"; |
| 1693 |
drive-strength = <2>; |
| 1694 |
bias-pull-down; |
| 1695 |
}; |
| 1696 |
|
| 1697 |
clkreq-pins { |
| 1698 |
pins = "gpio131"; |
| 1699 |
function = "pci_e1"; |
| 1700 |
drive-strength = <2>; |
| 1701 |
bias-pull-up; |
| 1702 |
}; |
| 1703 |
|
| 1704 |
wake-pins { |
| 1705 |
pins = "gpio132"; |
| 1706 |
function = "gpio"; |
| 1707 |
drive-strength = <2>; |
| 1708 |
bias-pull-down; |
| 1709 |
}; |
| 1710 |
}; |
| 1711 |
|
| 1712 |
pcie1_state_off: pcie1-off-state { |
| 1713 |
/* Perst is missing? */ |
| 1714 |
clkreq-pins { |
| 1715 |
pins = "gpio131"; |
| 1716 |
function = "gpio"; |
| 1717 |
drive-strength = <2>; |
| 1718 |
bias-disable; |
| 1719 |
}; |
| 1720 |
|
| 1721 |
wake-pins { |
| 1722 |
pins = "gpio132"; |
| 1723 |
function = "gpio"; |
| 1724 |
drive-strength = <2>; |
| 1725 |
bias-disable; |
| 1726 |
}; |
| 1727 |
}; |
| 1728 |
|
| 1729 |
pcie2_state_on: pcie2-on-state { |
| 1730 |
perst-pins { |
| 1731 |
pins = "gpio114"; |
| 1732 |
function = "gpio"; |
| 1733 |
drive-strength = <2>; |
| 1734 |
bias-pull-down; |
| 1735 |
}; |
| 1736 |
|
| 1737 |
clkreq-pins { |
| 1738 |
pins = "gpio115"; |
| 1739 |
function = "pci_e2"; |
| 1740 |
drive-strength = <2>; |
| 1741 |
bias-pull-up; |
| 1742 |
}; |
| 1743 |
|
| 1744 |
wake-pins { |
| 1745 |
pins = "gpio116"; |
| 1746 |
function = "gpio"; |
| 1747 |
drive-strength = <2>; |
| 1748 |
bias-pull-down; |
| 1749 |
}; |
| 1750 |
}; |
| 1751 |
|
| 1752 |
pcie2_state_off: pcie2-off-state { |
| 1753 |
/* Perst is missing? */ |
| 1754 |
clkreq-pins { |
| 1755 |
pins = "gpio115"; |
| 1756 |
function = "gpio"; |
| 1757 |
drive-strength = <2>; |
| 1758 |
bias-disable; |
| 1759 |
}; |
| 1760 |
|
| 1761 |
wake-pins { |
| 1762 |
pins = "gpio116"; |
| 1763 |
function = "gpio"; |
| 1764 |
drive-strength = <2>; |
| 1765 |
bias-disable; |
| 1766 |
}; |
| 1767 |
}; |
| 1768 |
|
| 1769 |
sdc1_state_on: sdc1-on-state { |
| 1770 |
clk-pins { |
| 1771 |
pins = "sdc1_clk"; |
| 1772 |
bias-disable; |
| 1773 |
drive-strength = <16>; |
| 1774 |
}; |
| 1775 |
|
| 1776 |
cmd-pins { |
| 1777 |
pins = "sdc1_cmd"; |
| 1778 |
bias-pull-up; |
| 1779 |
drive-strength = <10>; |
| 1780 |
}; |
| 1781 |
|
| 1782 |
data-pins { |
| 1783 |
pins = "sdc1_data"; |
| 1784 |
bias-pull-up; |
| 1785 |
drive-strength = <10>; |
| 1786 |
}; |
| 1787 |
|
| 1788 |
rclk-pins { |
| 1789 |
pins = "sdc1_rclk"; |
| 1790 |
bias-pull-down; |
| 1791 |
}; |
| 1792 |
}; |
| 1793 |
|
| 1794 |
sdc1_state_off: sdc1-off-state { |
| 1795 |
clk-pins { |
| 1796 |
pins = "sdc1_clk"; |
| 1797 |
bias-disable; |
| 1798 |
drive-strength = <2>; |
| 1799 |
}; |
| 1800 |
|
| 1801 |
cmd-pins { |
| 1802 |
pins = "sdc1_cmd"; |
| 1803 |
bias-pull-up; |
| 1804 |
drive-strength = <2>; |
| 1805 |
}; |
| 1806 |
|
| 1807 |
data-pins { |
| 1808 |
pins = "sdc1_data"; |
| 1809 |
bias-pull-up; |
| 1810 |
drive-strength = <2>; |
| 1811 |
}; |
| 1812 |
|
| 1813 |
rclk-pins { |
| 1814 |
pins = "sdc1_rclk"; |
| 1815 |
bias-pull-down; |
| 1816 |
}; |
| 1817 |
}; |
| 1818 |
|
| 1819 |
sdc2_state_on: sdc2-on-state { |
| 1820 |
clk-pins { |
| 1821 |
pins = "sdc2_clk"; |
| 1822 |
bias-disable; |
| 1823 |
drive-strength = <16>; |
| 1824 |
}; |
| 1825 |
|
| 1826 |
cmd-pins { |
| 1827 |
pins = "sdc2_cmd"; |
| 1828 |
bias-pull-up; |
| 1829 |
drive-strength = <10>; |
| 1830 |
}; |
| 1831 |
|
| 1832 |
data-pins { |
| 1833 |
pins = "sdc2_data"; |
| 1834 |
bias-pull-up; |
| 1835 |
drive-strength = <10>; |
| 1836 |
}; |
| 1837 |
}; |
| 1838 |
|
| 1839 |
sdc2_state_off: sdc2-off-state { |
| 1840 |
clk-pins { |
| 1841 |
pins = "sdc2_clk"; |
| 1842 |
bias-disable; |
| 1843 |
drive-strength = <2>; |
| 1844 |
}; |
| 1845 |
|
| 1846 |
cmd-pins { |
| 1847 |
pins = "sdc2_cmd"; |
| 1848 |
bias-pull-up; |
| 1849 |
drive-strength = <2>; |
| 1850 |
}; |
| 1851 |
|
| 1852 |
data-pins { |
| 1853 |
pins = "sdc2_data"; |
| 1854 |
bias-pull-up; |
| 1855 |
drive-strength = <2>; |
| 1856 |
}; |
| 1857 |
}; |
| 1858 |
}; |
| 1859 |
|
| 1860 |
sram@290000 { |
| 1861 |
compatible = "qcom,rpm-stats"; |
| 1862 |
reg = <0x00290000 0x10000>; |
| 1863 |
}; |
| 1864 |
|
| 1865 |
spmi_bus: spmi@400f000 { |
| 1866 |
compatible = "qcom,spmi-pmic-arb"; |
| 1867 |
reg = <0x0400f000 0x1000>, |
| 1868 |
<0x04400000 0x800000>, |
| 1869 |
<0x04c00000 0x800000>, |
| 1870 |
<0x05800000 0x200000>, |
| 1871 |
<0x0400a000 0x002100>; |
| 1872 |
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| 1873 |
interrupt-names = "periph_irq"; |
| 1874 |
interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; |
| 1875 |
qcom,ee = <0>; |
| 1876 |
qcom,channel = <0>; |
| 1877 |
#address-cells = <2>; |
| 1878 |
#size-cells = <0>; |
| 1879 |
interrupt-controller; |
| 1880 |
#interrupt-cells = <4>; |
| 1881 |
}; |
| 1882 |
|
| 1883 |
bus@0 { |
| 1884 |
power-domains = <&gcc AGGRE0_NOC_GDSC>; |
| 1885 |
compatible = "simple-pm-bus"; |
| 1886 |
#address-cells = <1>; |
| 1887 |
#size-cells = <1>; |
| 1888 |
ranges = <0x0 0x0 0xffffffff>; |
| 1889 |
|
| 1890 |
pcie0: pcie@600000 { |
| 1891 |
compatible = "qcom,pcie-msm8996"; |
| 1892 |
status = "disabled"; |
| 1893 |
power-domains = <&gcc PCIE0_GDSC>; |
| 1894 |
bus-range = <0x00 0xff>; |
| 1895 |
num-lanes = <1>; |
| 1896 |
|
| 1897 |
reg = <0x00600000 0x2000>, |
| 1898 |
<0x0c000000 0xf1d>, |
| 1899 |
<0x0c000f20 0xa8>, |
| 1900 |
<0x0c100000 0x100000>; |
| 1901 |
reg-names = "parf", "dbi", "elbi","config"; |
| 1902 |
|
| 1903 |
phys = <&pciephy_0>; |
| 1904 |
phy-names = "pciephy"; |
| 1905 |
|
| 1906 |
#address-cells = <3>; |
| 1907 |
#size-cells = <2>; |
| 1908 |
ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>, |
| 1909 |
<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; |
| 1910 |
|
| 1911 |
device_type = "pci"; |
| 1912 |
|
| 1913 |
interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, |
| 1914 |
<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, |
| 1915 |
<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, |
| 1916 |
<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, |
| 1917 |
<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, |
| 1918 |
<GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, |
| 1919 |
<GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, |
| 1920 |
<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>; |
| 1921 |
interrupt-names = "msi0", |
| 1922 |
"msi1", |
| 1923 |
"msi2", |
| 1924 |
"msi3", |
| 1925 |
"msi4", |
| 1926 |
"msi5", |
| 1927 |
"msi6", |
| 1928 |
"msi7"; |
| 1929 |
#interrupt-cells = <1>; |
| 1930 |
interrupt-map-mask = <0 0 0 0x7>; |
| 1931 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ |
| 1932 |
<0 0 0 2 &intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ |
| 1933 |
<0 0 0 3 &intc GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ |
| 1934 |
<0 0 0 4 &intc GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ |
| 1935 |
|
| 1936 |
pinctrl-names = "default", "sleep"; |
| 1937 |
pinctrl-0 = <&pcie0_state_on>; |
| 1938 |
pinctrl-1 = <&pcie0_state_off>; |
| 1939 |
|
| 1940 |
linux,pci-domain = <0>; |
| 1941 |
|
| 1942 |
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, |
| 1943 |
<&gcc GCC_PCIE_0_AUX_CLK>, |
| 1944 |
<&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| 1945 |
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>, |
| 1946 |
<&gcc GCC_PCIE_0_SLV_AXI_CLK>; |
| 1947 |
|
| 1948 |
clock-names = "pipe", |
| 1949 |
"aux", |
| 1950 |
"cfg", |
| 1951 |
"bus_master", |
| 1952 |
"bus_slave"; |
| 1953 |
|
| 1954 |
pcie@0 { |
| 1955 |
device_type = "pci"; |
| 1956 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 1957 |
bus-range = <0x01 0xff>; |
| 1958 |
|
| 1959 |
#address-cells = <3>; |
| 1960 |
#size-cells = <2>; |
| 1961 |
ranges; |
| 1962 |
}; |
| 1963 |
}; |
| 1964 |
|
| 1965 |
pcie1: pcie@608000 { |
| 1966 |
compatible = "qcom,pcie-msm8996"; |
| 1967 |
power-domains = <&gcc PCIE1_GDSC>; |
| 1968 |
bus-range = <0x00 0xff>; |
| 1969 |
num-lanes = <1>; |
| 1970 |
|
| 1971 |
status = "disabled"; |
| 1972 |
|
| 1973 |
reg = <0x00608000 0x2000>, |
| 1974 |
<0x0d000000 0xf1d>, |
| 1975 |
<0x0d000f20 0xa8>, |
| 1976 |
<0x0d100000 0x100000>; |
| 1977 |
|
| 1978 |
reg-names = "parf", "dbi", "elbi","config"; |
| 1979 |
|
| 1980 |
phys = <&pciephy_1>; |
| 1981 |
phy-names = "pciephy"; |
| 1982 |
|
| 1983 |
#address-cells = <3>; |
| 1984 |
#size-cells = <2>; |
| 1985 |
ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>, |
| 1986 |
<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; |
| 1987 |
|
| 1988 |
device_type = "pci"; |
| 1989 |
|
| 1990 |
interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, |
| 1991 |
<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, |
| 1992 |
<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, |
| 1993 |
<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, |
| 1994 |
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, |
| 1995 |
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, |
| 1996 |
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, |
| 1997 |
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>; |
| 1998 |
interrupt-names = "msi0", |
| 1999 |
"msi1", |
| 2000 |
"msi2", |
| 2001 |
"msi3", |
| 2002 |
"msi4", |
| 2003 |
"msi5", |
| 2004 |
"msi6", |
| 2005 |
"msi7"; |
| 2006 |
#interrupt-cells = <1>; |
| 2007 |
interrupt-map-mask = <0 0 0 0x7>; |
| 2008 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ |
| 2009 |
<0 0 0 2 &intc GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ |
| 2010 |
<0 0 0 3 &intc GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ |
| 2011 |
<0 0 0 4 &intc GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ |
| 2012 |
|
| 2013 |
pinctrl-names = "default", "sleep"; |
| 2014 |
pinctrl-0 = <&pcie1_state_on>; |
| 2015 |
pinctrl-1 = <&pcie1_state_off>; |
| 2016 |
|
| 2017 |
linux,pci-domain = <1>; |
| 2018 |
|
| 2019 |
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, |
| 2020 |
<&gcc GCC_PCIE_1_AUX_CLK>, |
| 2021 |
<&gcc GCC_PCIE_1_CFG_AHB_CLK>, |
| 2022 |
<&gcc GCC_PCIE_1_MSTR_AXI_CLK>, |
| 2023 |
<&gcc GCC_PCIE_1_SLV_AXI_CLK>; |
| 2024 |
|
| 2025 |
clock-names = "pipe", |
| 2026 |
"aux", |
| 2027 |
"cfg", |
| 2028 |
"bus_master", |
| 2029 |
"bus_slave"; |
| 2030 |
|
| 2031 |
pcie@0 { |
| 2032 |
device_type = "pci"; |
| 2033 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 2034 |
bus-range = <0x01 0xff>; |
| 2035 |
|
| 2036 |
#address-cells = <3>; |
| 2037 |
#size-cells = <2>; |
| 2038 |
ranges; |
| 2039 |
}; |
| 2040 |
}; |
| 2041 |
|
| 2042 |
pcie2: pcie@610000 { |
| 2043 |
compatible = "qcom,pcie-msm8996"; |
| 2044 |
power-domains = <&gcc PCIE2_GDSC>; |
| 2045 |
bus-range = <0x00 0xff>; |
| 2046 |
num-lanes = <1>; |
| 2047 |
status = "disabled"; |
| 2048 |
reg = <0x00610000 0x2000>, |
| 2049 |
<0x0e000000 0xf1d>, |
| 2050 |
<0x0e000f20 0xa8>, |
| 2051 |
<0x0e100000 0x100000>; |
| 2052 |
|
| 2053 |
reg-names = "parf", "dbi", "elbi","config"; |
| 2054 |
|
| 2055 |
phys = <&pciephy_2>; |
| 2056 |
phy-names = "pciephy"; |
| 2057 |
|
| 2058 |
#address-cells = <3>; |
| 2059 |
#size-cells = <2>; |
| 2060 |
ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>, |
| 2061 |
<0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; |
| 2062 |
|
| 2063 |
device_type = "pci"; |
| 2064 |
|
| 2065 |
interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, |
| 2066 |
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, |
| 2067 |
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, |
| 2068 |
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, |
| 2069 |
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, |
| 2070 |
<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, |
| 2071 |
<GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, |
| 2072 |
<GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>; |
| 2073 |
interrupt-names = "msi0", |
| 2074 |
"msi1", |
| 2075 |
"msi2", |
| 2076 |
"msi3", |
| 2077 |
"msi4", |
| 2078 |
"msi5", |
| 2079 |
"msi6", |
| 2080 |
"msi7"; |
| 2081 |
#interrupt-cells = <1>; |
| 2082 |
interrupt-map-mask = <0 0 0 0x7>; |
| 2083 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ |
| 2084 |
<0 0 0 2 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ |
| 2085 |
<0 0 0 3 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ |
| 2086 |
<0 0 0 4 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ |
| 2087 |
|
| 2088 |
pinctrl-names = "default", "sleep"; |
| 2089 |
pinctrl-0 = <&pcie2_state_on>; |
| 2090 |
pinctrl-1 = <&pcie2_state_off>; |
| 2091 |
|
| 2092 |
linux,pci-domain = <2>; |
| 2093 |
clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, |
| 2094 |
<&gcc GCC_PCIE_2_AUX_CLK>, |
| 2095 |
<&gcc GCC_PCIE_2_CFG_AHB_CLK>, |
| 2096 |
<&gcc GCC_PCIE_2_MSTR_AXI_CLK>, |
| 2097 |
<&gcc GCC_PCIE_2_SLV_AXI_CLK>; |
| 2098 |
|
| 2099 |
clock-names = "pipe", |
| 2100 |
"aux", |
| 2101 |
"cfg", |
| 2102 |
"bus_master", |
| 2103 |
"bus_slave"; |
| 2104 |
|
| 2105 |
pcie@0 { |
| 2106 |
device_type = "pci"; |
| 2107 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 2108 |
bus-range = <0x01 0xff>; |
| 2109 |
|
| 2110 |
#address-cells = <3>; |
| 2111 |
#size-cells = <2>; |
| 2112 |
ranges; |
| 2113 |
}; |
| 2114 |
}; |
| 2115 |
}; |
| 2116 |
|
| 2117 |
ufshc: ufshc@624000 { |
| 2118 |
compatible = "qcom,msm8996-ufshc", "qcom,ufshc", |
| 2119 |
"jedec,ufs-2.0"; |
| 2120 |
reg = <0x00624000 0x2500>; |
| 2121 |
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; |
| 2122 |
|
| 2123 |
phys = <&ufsphy>; |
| 2124 |
phy-names = "ufsphy"; |
| 2125 |
|
| 2126 |
power-domains = <&gcc UFS_GDSC>; |
| 2127 |
|
| 2128 |
clock-names = |
| 2129 |
"core_clk", |
| 2130 |
"bus_clk", |
| 2131 |
"bus_aggr_clk", |
| 2132 |
"iface_clk", |
| 2133 |
"core_clk_unipro", |
| 2134 |
"core_clk_ice", |
| 2135 |
"ref_clk", |
| 2136 |
"tx_lane0_sync_clk", |
| 2137 |
"rx_lane0_sync_clk"; |
| 2138 |
clocks = |
| 2139 |
<&gcc GCC_UFS_AXI_CLK>, |
| 2140 |
<&gcc GCC_SYS_NOC_UFS_AXI_CLK>, |
| 2141 |
<&gcc GCC_AGGRE2_UFS_AXI_CLK>, |
| 2142 |
<&gcc GCC_UFS_AHB_CLK>, |
| 2143 |
<&gcc GCC_UFS_UNIPRO_CORE_CLK>, |
| 2144 |
<&gcc GCC_UFS_ICE_CORE_CLK>, |
| 2145 |
<&rpmcc RPM_SMD_LN_BB_CLK>, |
| 2146 |
<&gcc GCC_UFS_TX_SYMBOL_0_CLK>, |
| 2147 |
<&gcc GCC_UFS_RX_SYMBOL_0_CLK>; |
| 2148 |
freq-table-hz = |
| 2149 |
<100000000 200000000>, |
| 2150 |
<0 0>, |
| 2151 |
<0 0>, |
| 2152 |
<0 0>, |
| 2153 |
<75000000 150000000>, |
| 2154 |
<150000000 300000000>, |
| 2155 |
<0 0>, |
| 2156 |
<0 0>, |
| 2157 |
<0 0>; |
| 2158 |
|
| 2159 |
interconnects = <&a2noc MASTER_UFS &bimc SLAVE_EBI_CH0>, |
| 2160 |
<&bimc MASTER_AMPSS_M0 &cnoc SLAVE_UFS_CFG>; |
| 2161 |
interconnect-names = "ufs-ddr", "cpu-ufs"; |
| 2162 |
|
| 2163 |
lanes-per-direction = <1>; |
| 2164 |
#reset-cells = <1>; |
| 2165 |
status = "disabled"; |
| 2166 |
}; |
| 2167 |
|
| 2168 |
ufsphy: phy@627000 { |
| 2169 |
compatible = "qcom,msm8996-qmp-ufs-phy"; |
| 2170 |
reg = <0x00627000 0x1000>; |
| 2171 |
|
| 2172 |
clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, <&gcc GCC_UFS_CLKREF_CLK>; |
| 2173 |
clock-names = "ref", "qref"; |
| 2174 |
|
| 2175 |
resets = <&ufshc 0>; |
| 2176 |
reset-names = "ufsphy"; |
| 2177 |
|
| 2178 |
#clock-cells = <1>; |
| 2179 |
#phy-cells = <0>; |
| 2180 |
|
| 2181 |
status = "disabled"; |
| 2182 |
}; |
| 2183 |
|
| 2184 |
camss: camss@a34000 { |
| 2185 |
compatible = "qcom,msm8996-camss"; |
| 2186 |
reg = <0x00a34000 0x1000>, |
| 2187 |
<0x00a00030 0x4>, |
| 2188 |
<0x00a35000 0x1000>, |
| 2189 |
<0x00a00038 0x4>, |
| 2190 |
<0x00a36000 0x1000>, |
| 2191 |
<0x00a00040 0x4>, |
| 2192 |
<0x00a30000 0x100>, |
| 2193 |
<0x00a30400 0x100>, |
| 2194 |
<0x00a30800 0x100>, |
| 2195 |
<0x00a30c00 0x100>, |
| 2196 |
<0x00a31000 0x500>, |
| 2197 |
<0x00a00020 0x10>, |
| 2198 |
<0x00a10000 0x1000>, |
| 2199 |
<0x00a14000 0x1000>; |
| 2200 |
reg-names = "csiphy0", |
| 2201 |
"csiphy0_clk_mux", |
| 2202 |
"csiphy1", |
| 2203 |
"csiphy1_clk_mux", |
| 2204 |
"csiphy2", |
| 2205 |
"csiphy2_clk_mux", |
| 2206 |
"csid0", |
| 2207 |
"csid1", |
| 2208 |
"csid2", |
| 2209 |
"csid3", |
| 2210 |
"ispif", |
| 2211 |
"csi_clk_mux", |
| 2212 |
"vfe0", |
| 2213 |
"vfe1"; |
| 2214 |
interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, |
| 2215 |
<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, |
| 2216 |
<GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, |
| 2217 |
<GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, |
| 2218 |
<GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, |
| 2219 |
<GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, |
| 2220 |
<GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, |
| 2221 |
<GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, |
| 2222 |
<GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, |
| 2223 |
<GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; |
| 2224 |
interrupt-names = "csiphy0", |
| 2225 |
"csiphy1", |
| 2226 |
"csiphy2", |
| 2227 |
"csid0", |
| 2228 |
"csid1", |
| 2229 |
"csid2", |
| 2230 |
"csid3", |
| 2231 |
"ispif", |
| 2232 |
"vfe0", |
| 2233 |
"vfe1"; |
| 2234 |
power-domains = <&mmcc VFE0_GDSC>, |
| 2235 |
<&mmcc VFE1_GDSC>; |
| 2236 |
clocks = <&mmcc CAMSS_TOP_AHB_CLK>, |
| 2237 |
<&mmcc CAMSS_ISPIF_AHB_CLK>, |
| 2238 |
<&mmcc CAMSS_CSI0PHYTIMER_CLK>, |
| 2239 |
<&mmcc CAMSS_CSI1PHYTIMER_CLK>, |
| 2240 |
<&mmcc CAMSS_CSI2PHYTIMER_CLK>, |
| 2241 |
<&mmcc CAMSS_CSI0_AHB_CLK>, |
| 2242 |
<&mmcc CAMSS_CSI0_CLK>, |
| 2243 |
<&mmcc CAMSS_CSI0PHY_CLK>, |
| 2244 |
<&mmcc CAMSS_CSI0PIX_CLK>, |
| 2245 |
<&mmcc CAMSS_CSI0RDI_CLK>, |
| 2246 |
<&mmcc CAMSS_CSI1_AHB_CLK>, |
| 2247 |
<&mmcc CAMSS_CSI1_CLK>, |
| 2248 |
<&mmcc CAMSS_CSI1PHY_CLK>, |
| 2249 |
<&mmcc CAMSS_CSI1PIX_CLK>, |
| 2250 |
<&mmcc CAMSS_CSI1RDI_CLK>, |
| 2251 |
<&mmcc CAMSS_CSI2_AHB_CLK>, |
| 2252 |
<&mmcc CAMSS_CSI2_CLK>, |
| 2253 |
<&mmcc CAMSS_CSI2PHY_CLK>, |
| 2254 |
<&mmcc CAMSS_CSI2PIX_CLK>, |
| 2255 |
<&mmcc CAMSS_CSI2RDI_CLK>, |
| 2256 |
<&mmcc CAMSS_CSI3_AHB_CLK>, |
| 2257 |
<&mmcc CAMSS_CSI3_CLK>, |
| 2258 |
<&mmcc CAMSS_CSI3PHY_CLK>, |
| 2259 |
<&mmcc CAMSS_CSI3PIX_CLK>, |
| 2260 |
<&mmcc CAMSS_CSI3RDI_CLK>, |
| 2261 |
<&mmcc CAMSS_AHB_CLK>, |
| 2262 |
<&mmcc CAMSS_VFE0_CLK>, |
| 2263 |
<&mmcc CAMSS_CSI_VFE0_CLK>, |
| 2264 |
<&mmcc CAMSS_VFE0_AHB_CLK>, |
| 2265 |
<&mmcc CAMSS_VFE0_STREAM_CLK>, |
| 2266 |
<&mmcc CAMSS_VFE1_CLK>, |
| 2267 |
<&mmcc CAMSS_CSI_VFE1_CLK>, |
| 2268 |
<&mmcc CAMSS_VFE1_AHB_CLK>, |
| 2269 |
<&mmcc CAMSS_VFE1_STREAM_CLK>, |
| 2270 |
<&mmcc CAMSS_VFE_AHB_CLK>, |
| 2271 |
<&mmcc CAMSS_VFE_AXI_CLK>; |
| 2272 |
clock-names = "top_ahb", |
| 2273 |
"ispif_ahb", |
| 2274 |
"csiphy0_timer", |
| 2275 |
"csiphy1_timer", |
| 2276 |
"csiphy2_timer", |
| 2277 |
"csi0_ahb", |
| 2278 |
"csi0", |
| 2279 |
"csi0_phy", |
| 2280 |
"csi0_pix", |
| 2281 |
"csi0_rdi", |
| 2282 |
"csi1_ahb", |
| 2283 |
"csi1", |
| 2284 |
"csi1_phy", |
| 2285 |
"csi1_pix", |
| 2286 |
"csi1_rdi", |
| 2287 |
"csi2_ahb", |
| 2288 |
"csi2", |
| 2289 |
"csi2_phy", |
| 2290 |
"csi2_pix", |
| 2291 |
"csi2_rdi", |
| 2292 |
"csi3_ahb", |
| 2293 |
"csi3", |
| 2294 |
"csi3_phy", |
| 2295 |
"csi3_pix", |
| 2296 |
"csi3_rdi", |
| 2297 |
"ahb", |
| 2298 |
"vfe0", |
| 2299 |
"csi_vfe0", |
| 2300 |
"vfe0_ahb", |
| 2301 |
"vfe0_stream", |
| 2302 |
"vfe1", |
| 2303 |
"csi_vfe1", |
| 2304 |
"vfe1_ahb", |
| 2305 |
"vfe1_stream", |
| 2306 |
"vfe_ahb", |
| 2307 |
"vfe_axi"; |
| 2308 |
iommus = <&vfe_smmu 0>, |
| 2309 |
<&vfe_smmu 1>, |
| 2310 |
<&vfe_smmu 2>, |
| 2311 |
<&vfe_smmu 3>; |
| 2312 |
status = "disabled"; |
| 2313 |
ports { |
| 2314 |
#address-cells = <1>; |
| 2315 |
#size-cells = <0>; |
| 2316 |
}; |
| 2317 |
}; |
| 2318 |
|
| 2319 |
cci: cci@a0c000 { |
| 2320 |
compatible = "qcom,msm8996-cci"; |
| 2321 |
#address-cells = <1>; |
| 2322 |
#size-cells = <0>; |
| 2323 |
reg = <0xa0c000 0x1000>; |
| 2324 |
interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>; |
| 2325 |
power-domains = <&mmcc CAMSS_GDSC>; |
| 2326 |
clocks = <&mmcc CAMSS_TOP_AHB_CLK>, |
| 2327 |
<&mmcc CAMSS_CCI_AHB_CLK>, |
| 2328 |
<&mmcc CAMSS_CCI_CLK>, |
| 2329 |
<&mmcc CAMSS_AHB_CLK>; |
| 2330 |
clock-names = "camss_top_ahb", |
| 2331 |
"cci_ahb", |
| 2332 |
"cci", |
| 2333 |
"camss_ahb"; |
| 2334 |
assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>, |
| 2335 |
<&mmcc CAMSS_CCI_CLK>; |
| 2336 |
assigned-clock-rates = <80000000>, <37500000>; |
| 2337 |
pinctrl-names = "default"; |
| 2338 |
pinctrl-0 = <&cci0_default &cci1_default>; |
| 2339 |
status = "disabled"; |
| 2340 |
|
| 2341 |
cci_i2c0: i2c-bus@0 { |
| 2342 |
reg = <0>; |
| 2343 |
clock-frequency = <400000>; |
| 2344 |
#address-cells = <1>; |
| 2345 |
#size-cells = <0>; |
| 2346 |
}; |
| 2347 |
|
| 2348 |
cci_i2c1: i2c-bus@1 { |
| 2349 |
reg = <1>; |
| 2350 |
clock-frequency = <400000>; |
| 2351 |
#address-cells = <1>; |
| 2352 |
#size-cells = <0>; |
| 2353 |
}; |
| 2354 |
}; |
| 2355 |
|
| 2356 |
adreno_smmu: iommu@b40000 { |
| 2357 |
compatible = "qcom,msm8996-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; |
| 2358 |
reg = <0x00b40000 0x10000>; |
| 2359 |
|
| 2360 |
#global-interrupts = <1>; |
| 2361 |
interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, |
| 2362 |
<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, |
| 2363 |
<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; |
| 2364 |
#iommu-cells = <1>; |
| 2365 |
|
| 2366 |
clocks = <&gcc GCC_MMSS_BIMC_GFX_CLK>, |
| 2367 |
<&mmcc GPU_AHB_CLK>; |
| 2368 |
clock-names = "bus", "iface"; |
| 2369 |
|
| 2370 |
power-domains = <&mmcc GPU_GDSC>; |
| 2371 |
}; |
| 2372 |
|
| 2373 |
venus: video-codec@c00000 { |
| 2374 |
compatible = "qcom,msm8996-venus"; |
| 2375 |
reg = <0x00c00000 0xff000>; |
| 2376 |
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; |
| 2377 |
power-domains = <&mmcc VENUS_GDSC>; |
| 2378 |
clocks = <&mmcc VIDEO_CORE_CLK>, |
| 2379 |
<&mmcc VIDEO_AHB_CLK>, |
| 2380 |
<&mmcc VIDEO_AXI_CLK>, |
| 2381 |
<&mmcc VIDEO_MAXI_CLK>; |
| 2382 |
clock-names = "core", "iface", "bus", "mbus"; |
| 2383 |
interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>, |
| 2384 |
<&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>; |
| 2385 |
interconnect-names = "video-mem", "cpu-cfg"; |
| 2386 |
iommus = <&venus_smmu 0x00>, |
| 2387 |
<&venus_smmu 0x01>, |
| 2388 |
<&venus_smmu 0x0a>, |
| 2389 |
<&venus_smmu 0x07>, |
| 2390 |
<&venus_smmu 0x0e>, |
| 2391 |
<&venus_smmu 0x0f>, |
| 2392 |
<&venus_smmu 0x08>, |
| 2393 |
<&venus_smmu 0x09>, |
| 2394 |
<&venus_smmu 0x0b>, |
| 2395 |
<&venus_smmu 0x0c>, |
| 2396 |
<&venus_smmu 0x0d>, |
| 2397 |
<&venus_smmu 0x10>, |
| 2398 |
<&venus_smmu 0x11>, |
| 2399 |
<&venus_smmu 0x21>, |
| 2400 |
<&venus_smmu 0x28>, |
| 2401 |
<&venus_smmu 0x29>, |
| 2402 |
<&venus_smmu 0x2b>, |
| 2403 |
<&venus_smmu 0x2c>, |
| 2404 |
<&venus_smmu 0x2d>, |
| 2405 |
<&venus_smmu 0x31>; |
| 2406 |
memory-region = <&venus_mem>; |
| 2407 |
status = "disabled"; |
| 2408 |
|
| 2409 |
video-decoder { |
| 2410 |
compatible = "venus-decoder"; |
| 2411 |
clocks = <&mmcc VIDEO_SUBCORE0_CLK>; |
| 2412 |
clock-names = "core"; |
| 2413 |
power-domains = <&mmcc VENUS_CORE0_GDSC>; |
| 2414 |
}; |
| 2415 |
|
| 2416 |
video-encoder { |
| 2417 |
compatible = "venus-encoder"; |
| 2418 |
clocks = <&mmcc VIDEO_SUBCORE1_CLK>; |
| 2419 |
clock-names = "core"; |
| 2420 |
power-domains = <&mmcc VENUS_CORE1_GDSC>; |
| 2421 |
}; |
| 2422 |
}; |
| 2423 |
|
| 2424 |
mdp_smmu: iommu@d00000 { |
| 2425 |
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; |
| 2426 |
reg = <0x00d00000 0x10000>; |
| 2427 |
|
| 2428 |
#global-interrupts = <1>; |
| 2429 |
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, |
| 2430 |
<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, |
| 2431 |
<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; |
| 2432 |
#iommu-cells = <1>; |
| 2433 |
clocks = <&mmcc SMMU_MDP_AXI_CLK>, |
| 2434 |
<&mmcc SMMU_MDP_AHB_CLK>; |
| 2435 |
clock-names = "bus", "iface"; |
| 2436 |
|
| 2437 |
power-domains = <&mmcc MDSS_GDSC>; |
| 2438 |
}; |
| 2439 |
|
| 2440 |
venus_smmu: iommu@d40000 { |
| 2441 |
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; |
| 2442 |
reg = <0x00d40000 0x20000>; |
| 2443 |
#global-interrupts = <1>; |
| 2444 |
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, |
| 2445 |
<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, |
| 2446 |
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, |
| 2447 |
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, |
| 2448 |
<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, |
| 2449 |
<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, |
| 2450 |
<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, |
| 2451 |
<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; |
| 2452 |
power-domains = <&mmcc MMAGIC_VIDEO_GDSC>; |
| 2453 |
clocks = <&mmcc SMMU_VIDEO_AXI_CLK>, |
| 2454 |
<&mmcc SMMU_VIDEO_AHB_CLK>; |
| 2455 |
clock-names = "bus", "iface"; |
| 2456 |
#iommu-cells = <1>; |
| 2457 |
status = "okay"; |
| 2458 |
}; |
| 2459 |
|
| 2460 |
vfe_smmu: iommu@da0000 { |
| 2461 |
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; |
| 2462 |
reg = <0x00da0000 0x10000>; |
| 2463 |
|
| 2464 |
#global-interrupts = <1>; |
| 2465 |
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| 2466 |
<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, |
| 2467 |
<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; |
| 2468 |
power-domains = <&mmcc MMAGIC_CAMSS_GDSC>; |
| 2469 |
clocks = <&mmcc SMMU_VFE_AXI_CLK>, |
| 2470 |
<&mmcc SMMU_VFE_AHB_CLK>; |
| 2471 |
clock-names = "bus", "iface"; |
| 2472 |
#iommu-cells = <1>; |
| 2473 |
}; |
| 2474 |
|
| 2475 |
lpass_q6_smmu: iommu@1600000 { |
| 2476 |
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; |
| 2477 |
reg = <0x01600000 0x20000>; |
| 2478 |
#iommu-cells = <1>; |
| 2479 |
power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>; |
| 2480 |
|
| 2481 |
#global-interrupts = <1>; |
| 2482 |
interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, |
| 2483 |
<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, |
| 2484 |
<GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, |
| 2485 |
<GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, |
| 2486 |
<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, |
| 2487 |
<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, |
| 2488 |
<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, |
| 2489 |
<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, |
| 2490 |
<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, |
| 2491 |
<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, |
| 2492 |
<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, |
| 2493 |
<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, |
| 2494 |
<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>; |
| 2495 |
|
| 2496 |
clocks = <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>, |
| 2497 |
<&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>; |
| 2498 |
clock-names = "bus", "iface"; |
| 2499 |
}; |
| 2500 |
|
| 2501 |
slpi_pil: remoteproc@1c00000 { |
| 2502 |
compatible = "qcom,msm8996-slpi-pil"; |
| 2503 |
reg = <0x01c00000 0x4000>; |
| 2504 |
|
| 2505 |
interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>, |
| 2506 |
<&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| 2507 |
<&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| 2508 |
<&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| 2509 |
<&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| 2510 |
interrupt-names = "wdog", |
| 2511 |
"fatal", |
| 2512 |
"ready", |
| 2513 |
"handover", |
| 2514 |
"stop-ack"; |
| 2515 |
|
| 2516 |
clocks = <&xo_board>; |
| 2517 |
clock-names = "xo"; |
| 2518 |
|
| 2519 |
memory-region = <&slpi_mem>; |
| 2520 |
|
| 2521 |
qcom,smem-states = <&slpi_smp2p_out 0>; |
| 2522 |
qcom,smem-state-names = "stop"; |
| 2523 |
|
| 2524 |
power-domains = <&rpmpd MSM8996_VDDSSCX>; |
| 2525 |
power-domain-names = "ssc_cx"; |
| 2526 |
|
| 2527 |
status = "disabled"; |
| 2528 |
|
| 2529 |
glink-edge { |
| 2530 |
interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; |
| 2531 |
label = "dsps"; |
| 2532 |
qcom,remote-pid = <3>; |
| 2533 |
mboxes = <&apcs_glb 27>; |
| 2534 |
}; |
| 2535 |
|
| 2536 |
smd-edge { |
| 2537 |
interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>; |
| 2538 |
|
| 2539 |
label = "dsps"; |
| 2540 |
mboxes = <&apcs_glb 25>; |
| 2541 |
qcom,smd-edge = <3>; |
| 2542 |
qcom,remote-pid = <3>; |
| 2543 |
}; |
| 2544 |
}; |
| 2545 |
|
| 2546 |
mss_pil: remoteproc@2080000 { |
| 2547 |
compatible = "qcom,msm8996-mss-pil"; |
| 2548 |
reg = <0x2080000 0x100>, |
| 2549 |
<0x2180000 0x020>; |
| 2550 |
reg-names = "qdsp6", "rmb"; |
| 2551 |
|
| 2552 |
interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>, |
| 2553 |
<&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| 2554 |
<&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| 2555 |
<&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| 2556 |
<&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, |
| 2557 |
<&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; |
| 2558 |
interrupt-names = "wdog", "fatal", "ready", |
| 2559 |
"handover", "stop-ack", |
| 2560 |
"shutdown-ack"; |
| 2561 |
|
| 2562 |
clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, |
| 2563 |
<&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, |
| 2564 |
<&gcc GCC_BOOT_ROM_AHB_CLK>, |
| 2565 |
<&xo_board>, |
| 2566 |
<&gcc GCC_MSS_GPLL0_DIV_CLK>, |
| 2567 |
<&gcc GCC_MSS_SNOC_AXI_CLK>, |
| 2568 |
<&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, |
| 2569 |
<&rpmcc RPM_SMD_QDSS_CLK>; |
| 2570 |
clock-names = "iface", |
| 2571 |
"bus", |
| 2572 |
"mem", |
| 2573 |
"xo", |
| 2574 |
"gpll0_mss", |
| 2575 |
"snoc_axi", |
| 2576 |
"mnoc_axi", |
| 2577 |
"qdss"; |
| 2578 |
|
| 2579 |
resets = <&gcc GCC_MSS_RESTART>; |
| 2580 |
reset-names = "mss_restart"; |
| 2581 |
|
| 2582 |
power-domains = <&rpmpd MSM8996_VDDCX>, |
| 2583 |
<&rpmpd MSM8996_VDDMX>; |
| 2584 |
power-domain-names = "cx", "mx"; |
| 2585 |
|
| 2586 |
qcom,smem-states = <&mpss_smp2p_out 0>; |
| 2587 |
qcom,smem-state-names = "stop"; |
| 2588 |
|
| 2589 |
qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>; |
| 2590 |
|
| 2591 |
status = "disabled"; |
| 2592 |
|
| 2593 |
mba { |
| 2594 |
memory-region = <&mba_mem>; |
| 2595 |
}; |
| 2596 |
|
| 2597 |
mpss { |
| 2598 |
memory-region = <&mpss_mem>; |
| 2599 |
}; |
| 2600 |
|
| 2601 |
metadata { |
| 2602 |
memory-region = <&mdata_mem>; |
| 2603 |
}; |
| 2604 |
|
| 2605 |
glink-edge { |
| 2606 |
interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>; |
| 2607 |
label = "modem"; |
| 2608 |
qcom,remote-pid = <1>; |
| 2609 |
mboxes = <&apcs_glb 15>; |
| 2610 |
}; |
| 2611 |
|
| 2612 |
smd-edge { |
| 2613 |
interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; |
| 2614 |
|
| 2615 |
label = "mpss"; |
| 2616 |
mboxes = <&apcs_glb 12>; |
| 2617 |
qcom,smd-edge = <0>; |
| 2618 |
qcom,remote-pid = <1>; |
| 2619 |
}; |
| 2620 |
}; |
| 2621 |
|
| 2622 |
stm@3002000 { |
| 2623 |
compatible = "arm,coresight-stm", "arm,primecell"; |
| 2624 |
reg = <0x3002000 0x1000>, |
| 2625 |
<0x8280000 0x180000>; |
| 2626 |
reg-names = "stm-base", "stm-stimulus-base"; |
| 2627 |
|
| 2628 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 2629 |
clock-names = "apb_pclk", "atclk"; |
| 2630 |
|
| 2631 |
out-ports { |
| 2632 |
port { |
| 2633 |
stm_out: endpoint { |
| 2634 |
remote-endpoint = |
| 2635 |
<&funnel0_in>; |
| 2636 |
}; |
| 2637 |
}; |
| 2638 |
}; |
| 2639 |
}; |
| 2640 |
|
| 2641 |
tpiu@3020000 { |
| 2642 |
compatible = "arm,coresight-tpiu", "arm,primecell"; |
| 2643 |
reg = <0x3020000 0x1000>; |
| 2644 |
|
| 2645 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 2646 |
clock-names = "apb_pclk", "atclk"; |
| 2647 |
|
| 2648 |
in-ports { |
| 2649 |
port { |
| 2650 |
tpiu_in: endpoint { |
| 2651 |
remote-endpoint = |
| 2652 |
<&replicator_out1>; |
| 2653 |
}; |
| 2654 |
}; |
| 2655 |
}; |
| 2656 |
}; |
| 2657 |
|
| 2658 |
funnel@3021000 { |
| 2659 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 2660 |
reg = <0x3021000 0x1000>; |
| 2661 |
|
| 2662 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 2663 |
clock-names = "apb_pclk", "atclk"; |
| 2664 |
|
| 2665 |
in-ports { |
| 2666 |
#address-cells = <1>; |
| 2667 |
#size-cells = <0>; |
| 2668 |
|
| 2669 |
port@7 { |
| 2670 |
reg = <7>; |
| 2671 |
funnel0_in: endpoint { |
| 2672 |
remote-endpoint = |
| 2673 |
<&stm_out>; |
| 2674 |
}; |
| 2675 |
}; |
| 2676 |
}; |
| 2677 |
|
| 2678 |
out-ports { |
| 2679 |
port { |
| 2680 |
funnel0_out: endpoint { |
| 2681 |
remote-endpoint = |
| 2682 |
<&merge_funnel_in0>; |
| 2683 |
}; |
| 2684 |
}; |
| 2685 |
}; |
| 2686 |
}; |
| 2687 |
|
| 2688 |
funnel@3022000 { |
| 2689 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 2690 |
reg = <0x3022000 0x1000>; |
| 2691 |
|
| 2692 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 2693 |
clock-names = "apb_pclk", "atclk"; |
| 2694 |
|
| 2695 |
in-ports { |
| 2696 |
#address-cells = <1>; |
| 2697 |
#size-cells = <0>; |
| 2698 |
|
| 2699 |
port@6 { |
| 2700 |
reg = <6>; |
| 2701 |
funnel1_in: endpoint { |
| 2702 |
remote-endpoint = |
| 2703 |
<&apss_merge_funnel_out>; |
| 2704 |
}; |
| 2705 |
}; |
| 2706 |
}; |
| 2707 |
|
| 2708 |
out-ports { |
| 2709 |
port { |
| 2710 |
funnel1_out: endpoint { |
| 2711 |
remote-endpoint = |
| 2712 |
<&merge_funnel_in1>; |
| 2713 |
}; |
| 2714 |
}; |
| 2715 |
}; |
| 2716 |
}; |
| 2717 |
|
| 2718 |
funnel@3023000 { |
| 2719 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 2720 |
reg = <0x3023000 0x1000>; |
| 2721 |
|
| 2722 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 2723 |
clock-names = "apb_pclk", "atclk"; |
| 2724 |
|
| 2725 |
in-ports { |
| 2726 |
port { |
| 2727 |
funnel_in2_in_modem_etm: endpoint { |
| 2728 |
remote-endpoint = |
| 2729 |
<&modem_etm_out_funnel_in2>; |
| 2730 |
}; |
| 2731 |
}; |
| 2732 |
}; |
| 2733 |
|
| 2734 |
out-ports { |
| 2735 |
port { |
| 2736 |
funnel2_out: endpoint { |
| 2737 |
remote-endpoint = |
| 2738 |
<&merge_funnel_in2>; |
| 2739 |
}; |
| 2740 |
}; |
| 2741 |
}; |
| 2742 |
}; |
| 2743 |
|
| 2744 |
funnel@3025000 { |
| 2745 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 2746 |
reg = <0x3025000 0x1000>; |
| 2747 |
|
| 2748 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 2749 |
clock-names = "apb_pclk", "atclk"; |
| 2750 |
|
| 2751 |
in-ports { |
| 2752 |
#address-cells = <1>; |
| 2753 |
#size-cells = <0>; |
| 2754 |
|
| 2755 |
port@0 { |
| 2756 |
reg = <0>; |
| 2757 |
merge_funnel_in0: endpoint { |
| 2758 |
remote-endpoint = |
| 2759 |
<&funnel0_out>; |
| 2760 |
}; |
| 2761 |
}; |
| 2762 |
|
| 2763 |
port@1 { |
| 2764 |
reg = <1>; |
| 2765 |
merge_funnel_in1: endpoint { |
| 2766 |
remote-endpoint = |
| 2767 |
<&funnel1_out>; |
| 2768 |
}; |
| 2769 |
}; |
| 2770 |
|
| 2771 |
port@2 { |
| 2772 |
reg = <2>; |
| 2773 |
merge_funnel_in2: endpoint { |
| 2774 |
remote-endpoint = |
| 2775 |
<&funnel2_out>; |
| 2776 |
}; |
| 2777 |
}; |
| 2778 |
}; |
| 2779 |
|
| 2780 |
out-ports { |
| 2781 |
port { |
| 2782 |
merge_funnel_out: endpoint { |
| 2783 |
remote-endpoint = |
| 2784 |
<&etf_in>; |
| 2785 |
}; |
| 2786 |
}; |
| 2787 |
}; |
| 2788 |
}; |
| 2789 |
|
| 2790 |
replicator@3026000 { |
| 2791 |
compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; |
| 2792 |
reg = <0x3026000 0x1000>; |
| 2793 |
|
| 2794 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 2795 |
clock-names = "apb_pclk", "atclk"; |
| 2796 |
|
| 2797 |
in-ports { |
| 2798 |
port { |
| 2799 |
replicator_in: endpoint { |
| 2800 |
remote-endpoint = |
| 2801 |
<&etf_out>; |
| 2802 |
}; |
| 2803 |
}; |
| 2804 |
}; |
| 2805 |
|
| 2806 |
out-ports { |
| 2807 |
#address-cells = <1>; |
| 2808 |
#size-cells = <0>; |
| 2809 |
|
| 2810 |
port@0 { |
| 2811 |
reg = <0>; |
| 2812 |
replicator_out0: endpoint { |
| 2813 |
remote-endpoint = |
| 2814 |
<&etr_in>; |
| 2815 |
}; |
| 2816 |
}; |
| 2817 |
|
| 2818 |
port@1 { |
| 2819 |
reg = <1>; |
| 2820 |
replicator_out1: endpoint { |
| 2821 |
remote-endpoint = |
| 2822 |
<&tpiu_in>; |
| 2823 |
}; |
| 2824 |
}; |
| 2825 |
}; |
| 2826 |
}; |
| 2827 |
|
| 2828 |
etf@3027000 { |
| 2829 |
compatible = "arm,coresight-tmc", "arm,primecell"; |
| 2830 |
reg = <0x3027000 0x1000>; |
| 2831 |
|
| 2832 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 2833 |
clock-names = "apb_pclk", "atclk"; |
| 2834 |
|
| 2835 |
in-ports { |
| 2836 |
port { |
| 2837 |
etf_in: endpoint { |
| 2838 |
remote-endpoint = |
| 2839 |
<&merge_funnel_out>; |
| 2840 |
}; |
| 2841 |
}; |
| 2842 |
}; |
| 2843 |
|
| 2844 |
out-ports { |
| 2845 |
port { |
| 2846 |
etf_out: endpoint { |
| 2847 |
remote-endpoint = |
| 2848 |
<&replicator_in>; |
| 2849 |
}; |
| 2850 |
}; |
| 2851 |
}; |
| 2852 |
}; |
| 2853 |
|
| 2854 |
etr@3028000 { |
| 2855 |
compatible = "arm,coresight-tmc", "arm,primecell"; |
| 2856 |
reg = <0x3028000 0x1000>; |
| 2857 |
|
| 2858 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 2859 |
clock-names = "apb_pclk", "atclk"; |
| 2860 |
arm,scatter-gather; |
| 2861 |
|
| 2862 |
in-ports { |
| 2863 |
port { |
| 2864 |
etr_in: endpoint { |
| 2865 |
remote-endpoint = |
| 2866 |
<&replicator_out0>; |
| 2867 |
}; |
| 2868 |
}; |
| 2869 |
}; |
| 2870 |
}; |
| 2871 |
|
| 2872 |
debug@3810000 { |
| 2873 |
compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| 2874 |
reg = <0x3810000 0x1000>; |
| 2875 |
|
| 2876 |
clocks = <&rpmcc RPM_QDSS_CLK>; |
| 2877 |
clock-names = "apb_pclk"; |
| 2878 |
|
| 2879 |
cpu = <&cpu0>; |
| 2880 |
}; |
| 2881 |
|
| 2882 |
etm@3840000 { |
| 2883 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 2884 |
reg = <0x3840000 0x1000>; |
| 2885 |
|
| 2886 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 2887 |
clock-names = "apb_pclk", "atclk"; |
| 2888 |
|
| 2889 |
cpu = <&cpu0>; |
| 2890 |
|
| 2891 |
out-ports { |
| 2892 |
port { |
| 2893 |
etm0_out: endpoint { |
| 2894 |
remote-endpoint = |
| 2895 |
<&apss_funnel0_in0>; |
| 2896 |
}; |
| 2897 |
}; |
| 2898 |
}; |
| 2899 |
}; |
| 2900 |
|
| 2901 |
debug@3910000 { |
| 2902 |
compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| 2903 |
reg = <0x3910000 0x1000>; |
| 2904 |
|
| 2905 |
clocks = <&rpmcc RPM_QDSS_CLK>; |
| 2906 |
clock-names = "apb_pclk"; |
| 2907 |
|
| 2908 |
cpu = <&cpu1>; |
| 2909 |
}; |
| 2910 |
|
| 2911 |
etm@3940000 { |
| 2912 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 2913 |
reg = <0x3940000 0x1000>; |
| 2914 |
|
| 2915 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 2916 |
clock-names = "apb_pclk", "atclk"; |
| 2917 |
|
| 2918 |
cpu = <&cpu1>; |
| 2919 |
|
| 2920 |
out-ports { |
| 2921 |
port { |
| 2922 |
etm1_out: endpoint { |
| 2923 |
remote-endpoint = |
| 2924 |
<&apss_funnel0_in1>; |
| 2925 |
}; |
| 2926 |
}; |
| 2927 |
}; |
| 2928 |
}; |
| 2929 |
|
| 2930 |
funnel@39b0000 { /* APSS Funnel 0 */ |
| 2931 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 2932 |
reg = <0x39b0000 0x1000>; |
| 2933 |
|
| 2934 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 2935 |
clock-names = "apb_pclk", "atclk"; |
| 2936 |
|
| 2937 |
in-ports { |
| 2938 |
#address-cells = <1>; |
| 2939 |
#size-cells = <0>; |
| 2940 |
|
| 2941 |
port@0 { |
| 2942 |
reg = <0>; |
| 2943 |
apss_funnel0_in0: endpoint { |
| 2944 |
remote-endpoint = <&etm0_out>; |
| 2945 |
}; |
| 2946 |
}; |
| 2947 |
|
| 2948 |
port@1 { |
| 2949 |
reg = <1>; |
| 2950 |
apss_funnel0_in1: endpoint { |
| 2951 |
remote-endpoint = <&etm1_out>; |
| 2952 |
}; |
| 2953 |
}; |
| 2954 |
}; |
| 2955 |
|
| 2956 |
out-ports { |
| 2957 |
port { |
| 2958 |
apss_funnel0_out: endpoint { |
| 2959 |
remote-endpoint = |
| 2960 |
<&apss_merge_funnel_in0>; |
| 2961 |
}; |
| 2962 |
}; |
| 2963 |
}; |
| 2964 |
}; |
| 2965 |
|
| 2966 |
debug@3a10000 { |
| 2967 |
compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| 2968 |
reg = <0x3a10000 0x1000>; |
| 2969 |
|
| 2970 |
clocks = <&rpmcc RPM_QDSS_CLK>; |
| 2971 |
clock-names = "apb_pclk"; |
| 2972 |
|
| 2973 |
cpu = <&cpu2>; |
| 2974 |
}; |
| 2975 |
|
| 2976 |
etm@3a40000 { |
| 2977 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 2978 |
reg = <0x3a40000 0x1000>; |
| 2979 |
|
| 2980 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 2981 |
clock-names = "apb_pclk", "atclk"; |
| 2982 |
|
| 2983 |
cpu = <&cpu2>; |
| 2984 |
|
| 2985 |
out-ports { |
| 2986 |
port { |
| 2987 |
etm2_out: endpoint { |
| 2988 |
remote-endpoint = |
| 2989 |
<&apss_funnel1_in0>; |
| 2990 |
}; |
| 2991 |
}; |
| 2992 |
}; |
| 2993 |
}; |
| 2994 |
|
| 2995 |
debug@3b10000 { |
| 2996 |
compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| 2997 |
reg = <0x3b10000 0x1000>; |
| 2998 |
|
| 2999 |
clocks = <&rpmcc RPM_QDSS_CLK>; |
| 3000 |
clock-names = "apb_pclk"; |
| 3001 |
|
| 3002 |
cpu = <&cpu3>; |
| 3003 |
}; |
| 3004 |
|
| 3005 |
etm@3b40000 { |
| 3006 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 3007 |
reg = <0x3b40000 0x1000>; |
| 3008 |
|
| 3009 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 3010 |
clock-names = "apb_pclk", "atclk"; |
| 3011 |
|
| 3012 |
cpu = <&cpu3>; |
| 3013 |
|
| 3014 |
out-ports { |
| 3015 |
port { |
| 3016 |
etm3_out: endpoint { |
| 3017 |
remote-endpoint = |
| 3018 |
<&apss_funnel1_in1>; |
| 3019 |
}; |
| 3020 |
}; |
| 3021 |
}; |
| 3022 |
}; |
| 3023 |
|
| 3024 |
funnel@3bb0000 { /* APSS Funnel 1 */ |
| 3025 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 3026 |
reg = <0x3bb0000 0x1000>; |
| 3027 |
|
| 3028 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 3029 |
clock-names = "apb_pclk", "atclk"; |
| 3030 |
|
| 3031 |
in-ports { |
| 3032 |
#address-cells = <1>; |
| 3033 |
#size-cells = <0>; |
| 3034 |
|
| 3035 |
port@0 { |
| 3036 |
reg = <0>; |
| 3037 |
apss_funnel1_in0: endpoint { |
| 3038 |
remote-endpoint = <&etm2_out>; |
| 3039 |
}; |
| 3040 |
}; |
| 3041 |
|
| 3042 |
port@1 { |
| 3043 |
reg = <1>; |
| 3044 |
apss_funnel1_in1: endpoint { |
| 3045 |
remote-endpoint = <&etm3_out>; |
| 3046 |
}; |
| 3047 |
}; |
| 3048 |
}; |
| 3049 |
|
| 3050 |
out-ports { |
| 3051 |
port { |
| 3052 |
apss_funnel1_out: endpoint { |
| 3053 |
remote-endpoint = |
| 3054 |
<&apss_merge_funnel_in1>; |
| 3055 |
}; |
| 3056 |
}; |
| 3057 |
}; |
| 3058 |
}; |
| 3059 |
|
| 3060 |
funnel@3bc0000 { |
| 3061 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 3062 |
reg = <0x3bc0000 0x1000>; |
| 3063 |
|
| 3064 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 3065 |
clock-names = "apb_pclk", "atclk"; |
| 3066 |
|
| 3067 |
in-ports { |
| 3068 |
#address-cells = <1>; |
| 3069 |
#size-cells = <0>; |
| 3070 |
|
| 3071 |
port@0 { |
| 3072 |
reg = <0>; |
| 3073 |
apss_merge_funnel_in0: endpoint { |
| 3074 |
remote-endpoint = |
| 3075 |
<&apss_funnel0_out>; |
| 3076 |
}; |
| 3077 |
}; |
| 3078 |
|
| 3079 |
port@1 { |
| 3080 |
reg = <1>; |
| 3081 |
apss_merge_funnel_in1: endpoint { |
| 3082 |
remote-endpoint = |
| 3083 |
<&apss_funnel1_out>; |
| 3084 |
}; |
| 3085 |
}; |
| 3086 |
}; |
| 3087 |
|
| 3088 |
out-ports { |
| 3089 |
port { |
| 3090 |
apss_merge_funnel_out: endpoint { |
| 3091 |
remote-endpoint = |
| 3092 |
<&funnel1_in>; |
| 3093 |
}; |
| 3094 |
}; |
| 3095 |
}; |
| 3096 |
}; |
| 3097 |
|
| 3098 |
kryocc: clock-controller@6400000 { |
| 3099 |
compatible = "qcom,msm8996-apcc"; |
| 3100 |
reg = <0x06400000 0x90000>; |
| 3101 |
|
| 3102 |
clock-names = "xo", "sys_apcs_aux"; |
| 3103 |
clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>; |
| 3104 |
|
| 3105 |
#clock-cells = <1>; |
| 3106 |
}; |
| 3107 |
|
| 3108 |
usb3: usb@6af8800 { |
| 3109 |
compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; |
| 3110 |
reg = <0x06af8800 0x400>; |
| 3111 |
#address-cells = <1>; |
| 3112 |
#size-cells = <1>; |
| 3113 |
ranges; |
| 3114 |
|
| 3115 |
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, |
| 3116 |
<GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, |
| 3117 |
<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, |
| 3118 |
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; |
| 3119 |
interrupt-names = "pwr_event", |
| 3120 |
"qusb2_phy", |
| 3121 |
"hs_phy_irq", |
| 3122 |
"ss_phy_irq"; |
| 3123 |
|
| 3124 |
clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, |
| 3125 |
<&gcc GCC_USB30_MASTER_CLK>, |
| 3126 |
<&gcc GCC_AGGRE2_USB3_AXI_CLK>, |
| 3127 |
<&gcc GCC_USB30_SLEEP_CLK>, |
| 3128 |
<&gcc GCC_USB30_MOCK_UTMI_CLK>; |
| 3129 |
clock-names = "cfg_noc", |
| 3130 |
"core", |
| 3131 |
"iface", |
| 3132 |
"sleep", |
| 3133 |
"mock_utmi"; |
| 3134 |
|
| 3135 |
assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, |
| 3136 |
<&gcc GCC_USB30_MASTER_CLK>; |
| 3137 |
assigned-clock-rates = <19200000>, <120000000>; |
| 3138 |
|
| 3139 |
interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>, |
| 3140 |
<&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>; |
| 3141 |
interconnect-names = "usb-ddr", "apps-usb"; |
| 3142 |
|
| 3143 |
power-domains = <&gcc USB30_GDSC>; |
| 3144 |
status = "disabled"; |
| 3145 |
|
| 3146 |
usb3_dwc3: usb@6a00000 { |
| 3147 |
compatible = "snps,dwc3"; |
| 3148 |
reg = <0x06a00000 0xcc00>; |
| 3149 |
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; |
| 3150 |
phys = <&hsusb_phy1>, <&usb3phy>; |
| 3151 |
phy-names = "usb2-phy", "usb3-phy"; |
| 3152 |
snps,hird-threshold = /bits/ 8 <0>; |
| 3153 |
snps,dis_u2_susphy_quirk; |
| 3154 |
snps,dis_enblslpm_quirk; |
| 3155 |
snps,is-utmi-l1-suspend; |
| 3156 |
snps,parkmode-disable-ss-quirk; |
| 3157 |
tx-fifo-resize; |
| 3158 |
}; |
| 3159 |
}; |
| 3160 |
|
| 3161 |
usb3phy: phy@7410000 { |
| 3162 |
compatible = "qcom,msm8996-qmp-usb3-phy"; |
| 3163 |
reg = <0x07410000 0x1000>; |
| 3164 |
|
| 3165 |
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, |
| 3166 |
<&gcc GCC_USB3_CLKREF_CLK>, |
| 3167 |
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, |
| 3168 |
<&gcc GCC_USB3_PHY_PIPE_CLK>; |
| 3169 |
clock-names = "aux", |
| 3170 |
"ref", |
| 3171 |
"cfg_ahb", |
| 3172 |
"pipe"; |
| 3173 |
clock-output-names = "usb3_phy_pipe_clk_src"; |
| 3174 |
#clock-cells = <0>; |
| 3175 |
#phy-cells = <0>; |
| 3176 |
|
| 3177 |
resets = <&gcc GCC_USB3_PHY_BCR>, |
| 3178 |
<&gcc GCC_USB3PHY_PHY_BCR>; |
| 3179 |
reset-names = "phy", |
| 3180 |
"phy_phy"; |
| 3181 |
|
| 3182 |
status = "disabled"; |
| 3183 |
}; |
| 3184 |
|
| 3185 |
hsusb_phy1: phy@7411000 { |
| 3186 |
compatible = "qcom,msm8996-qusb2-phy"; |
| 3187 |
reg = <0x07411000 0x180>; |
| 3188 |
#phy-cells = <0>; |
| 3189 |
|
| 3190 |
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, |
| 3191 |
<&gcc GCC_RX1_USB2_CLKREF_CLK>; |
| 3192 |
clock-names = "cfg_ahb", "ref"; |
| 3193 |
|
| 3194 |
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; |
| 3195 |
nvmem-cells = <&qusb2p_hstx_trim>; |
| 3196 |
status = "disabled"; |
| 3197 |
}; |
| 3198 |
|
| 3199 |
hsusb_phy2: phy@7412000 { |
| 3200 |
compatible = "qcom,msm8996-qusb2-phy"; |
| 3201 |
reg = <0x07412000 0x180>; |
| 3202 |
#phy-cells = <0>; |
| 3203 |
|
| 3204 |
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, |
| 3205 |
<&gcc GCC_RX2_USB2_CLKREF_CLK>; |
| 3206 |
clock-names = "cfg_ahb", "ref"; |
| 3207 |
|
| 3208 |
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; |
| 3209 |
nvmem-cells = <&qusb2s_hstx_trim>; |
| 3210 |
status = "disabled"; |
| 3211 |
}; |
| 3212 |
|
| 3213 |
sdhc1: mmc@7464900 { |
| 3214 |
compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; |
| 3215 |
reg = <0x07464900 0x11c>, <0x07464000 0x800>; |
| 3216 |
reg-names = "hc", "core"; |
| 3217 |
|
| 3218 |
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, |
| 3219 |
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; |
| 3220 |
interrupt-names = "hc_irq", "pwr_irq"; |
| 3221 |
|
| 3222 |
clock-names = "iface", "core", "xo"; |
| 3223 |
clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| 3224 |
<&gcc GCC_SDCC1_APPS_CLK>, |
| 3225 |
<&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 3226 |
resets = <&gcc GCC_SDCC1_BCR>; |
| 3227 |
|
| 3228 |
pinctrl-names = "default", "sleep"; |
| 3229 |
pinctrl-0 = <&sdc1_state_on>; |
| 3230 |
pinctrl-1 = <&sdc1_state_off>; |
| 3231 |
|
| 3232 |
bus-width = <8>; |
| 3233 |
non-removable; |
| 3234 |
status = "disabled"; |
| 3235 |
}; |
| 3236 |
|
| 3237 |
sdhc2: mmc@74a4900 { |
| 3238 |
compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; |
| 3239 |
reg = <0x074a4900 0x314>, <0x074a4000 0x800>; |
| 3240 |
reg-names = "hc", "core"; |
| 3241 |
|
| 3242 |
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| 3243 |
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; |
| 3244 |
interrupt-names = "hc_irq", "pwr_irq"; |
| 3245 |
|
| 3246 |
clock-names = "iface", "core", "xo"; |
| 3247 |
clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| 3248 |
<&gcc GCC_SDCC2_APPS_CLK>, |
| 3249 |
<&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 3250 |
resets = <&gcc GCC_SDCC2_BCR>; |
| 3251 |
|
| 3252 |
pinctrl-names = "default", "sleep"; |
| 3253 |
pinctrl-0 = <&sdc2_state_on>; |
| 3254 |
pinctrl-1 = <&sdc2_state_off>; |
| 3255 |
|
| 3256 |
bus-width = <4>; |
| 3257 |
status = "disabled"; |
| 3258 |
}; |
| 3259 |
|
| 3260 |
blsp1_dma: dma-controller@7544000 { |
| 3261 |
compatible = "qcom,bam-v1.7.0"; |
| 3262 |
reg = <0x07544000 0x2b000>; |
| 3263 |
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; |
| 3264 |
clocks = <&gcc GCC_BLSP1_AHB_CLK>; |
| 3265 |
clock-names = "bam_clk"; |
| 3266 |
qcom,controlled-remotely; |
| 3267 |
#dma-cells = <1>; |
| 3268 |
qcom,ee = <0>; |
| 3269 |
}; |
| 3270 |
|
| 3271 |
blsp1_uart2: serial@7570000 { |
| 3272 |
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| 3273 |
reg = <0x07570000 0x1000>; |
| 3274 |
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| 3275 |
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, |
| 3276 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 3277 |
clock-names = "core", "iface"; |
| 3278 |
pinctrl-names = "default", "sleep"; |
| 3279 |
pinctrl-0 = <&blsp1_uart2_default>; |
| 3280 |
pinctrl-1 = <&blsp1_uart2_sleep>; |
| 3281 |
dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; |
| 3282 |
dma-names = "tx", "rx"; |
| 3283 |
status = "disabled"; |
| 3284 |
}; |
| 3285 |
|
| 3286 |
blsp1_spi1: spi@7575000 { |
| 3287 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 3288 |
reg = <0x07575000 0x600>; |
| 3289 |
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| 3290 |
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, |
| 3291 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 3292 |
clock-names = "core", "iface"; |
| 3293 |
pinctrl-names = "default", "sleep"; |
| 3294 |
pinctrl-0 = <&blsp1_spi1_default>; |
| 3295 |
pinctrl-1 = <&blsp1_spi1_sleep>; |
| 3296 |
dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; |
| 3297 |
dma-names = "tx", "rx"; |
| 3298 |
#address-cells = <1>; |
| 3299 |
#size-cells = <0>; |
| 3300 |
status = "disabled"; |
| 3301 |
}; |
| 3302 |
|
| 3303 |
blsp1_i2c3: i2c@7577000 { |
| 3304 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 3305 |
reg = <0x07577000 0x1000>; |
| 3306 |
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| 3307 |
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, |
| 3308 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 3309 |
clock-names = "core", "iface"; |
| 3310 |
pinctrl-names = "default", "sleep"; |
| 3311 |
pinctrl-0 = <&blsp1_i2c3_default>; |
| 3312 |
pinctrl-1 = <&blsp1_i2c3_sleep>; |
| 3313 |
dmas = <&blsp1_dma 16>, <&blsp1_dma 17>; |
| 3314 |
dma-names = "tx", "rx"; |
| 3315 |
#address-cells = <1>; |
| 3316 |
#size-cells = <0>; |
| 3317 |
status = "disabled"; |
| 3318 |
}; |
| 3319 |
|
| 3320 |
blsp1_i2c6: i2c@757a000 { |
| 3321 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 3322 |
reg = <0x757a000 0x1000>; |
| 3323 |
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| 3324 |
clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, |
| 3325 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 3326 |
clock-names = "core", "iface"; |
| 3327 |
pinctrl-names = "default", "sleep"; |
| 3328 |
pinctrl-0 = <&blsp1_i2c6_default>; |
| 3329 |
pinctrl-1 = <&blsp1_i2c6_sleep>; |
| 3330 |
dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; |
| 3331 |
dma-names = "tx", "rx"; |
| 3332 |
#address-cells = <1>; |
| 3333 |
#size-cells = <0>; |
| 3334 |
status = "disabled"; |
| 3335 |
}; |
| 3336 |
|
| 3337 |
blsp2_dma: dma-controller@7584000 { |
| 3338 |
compatible = "qcom,bam-v1.7.0"; |
| 3339 |
reg = <0x07584000 0x2b000>; |
| 3340 |
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; |
| 3341 |
clocks = <&gcc GCC_BLSP2_AHB_CLK>; |
| 3342 |
clock-names = "bam_clk"; |
| 3343 |
qcom,controlled-remotely; |
| 3344 |
#dma-cells = <1>; |
| 3345 |
qcom,ee = <0>; |
| 3346 |
}; |
| 3347 |
|
| 3348 |
blsp2_uart2: serial@75b0000 { |
| 3349 |
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| 3350 |
reg = <0x075b0000 0x1000>; |
| 3351 |
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| 3352 |
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, |
| 3353 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 3354 |
clock-names = "core", "iface"; |
| 3355 |
status = "disabled"; |
| 3356 |
}; |
| 3357 |
|
| 3358 |
blsp2_uart3: serial@75b1000 { |
| 3359 |
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| 3360 |
reg = <0x075b1000 0x1000>; |
| 3361 |
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; |
| 3362 |
clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>, |
| 3363 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 3364 |
clock-names = "core", "iface"; |
| 3365 |
status = "disabled"; |
| 3366 |
}; |
| 3367 |
|
| 3368 |
blsp2_i2c1: i2c@75b5000 { |
| 3369 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 3370 |
reg = <0x075b5000 0x1000>; |
| 3371 |
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| 3372 |
clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, |
| 3373 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 3374 |
clock-names = "core", "iface"; |
| 3375 |
pinctrl-names = "default", "sleep"; |
| 3376 |
pinctrl-0 = <&blsp2_i2c1_default>; |
| 3377 |
pinctrl-1 = <&blsp2_i2c1_sleep>; |
| 3378 |
dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; |
| 3379 |
dma-names = "tx", "rx"; |
| 3380 |
#address-cells = <1>; |
| 3381 |
#size-cells = <0>; |
| 3382 |
status = "disabled"; |
| 3383 |
}; |
| 3384 |
|
| 3385 |
blsp2_i2c2: i2c@75b6000 { |
| 3386 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 3387 |
reg = <0x075b6000 0x1000>; |
| 3388 |
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; |
| 3389 |
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, |
| 3390 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 3391 |
clock-names = "core", "iface"; |
| 3392 |
pinctrl-names = "default", "sleep"; |
| 3393 |
pinctrl-0 = <&blsp2_i2c2_default>; |
| 3394 |
pinctrl-1 = <&blsp2_i2c2_sleep>; |
| 3395 |
dmas = <&blsp2_dma 14>, <&blsp2_dma 15>; |
| 3396 |
dma-names = "tx", "rx"; |
| 3397 |
#address-cells = <1>; |
| 3398 |
#size-cells = <0>; |
| 3399 |
status = "disabled"; |
| 3400 |
}; |
| 3401 |
|
| 3402 |
blsp2_i2c3: i2c@75b7000 { |
| 3403 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 3404 |
reg = <0x075b7000 0x1000>; |
| 3405 |
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| 3406 |
clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, |
| 3407 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 3408 |
clock-names = "core", "iface"; |
| 3409 |
clock-frequency = <400000>; |
| 3410 |
pinctrl-names = "default", "sleep"; |
| 3411 |
pinctrl-0 = <&blsp2_i2c3_default>; |
| 3412 |
pinctrl-1 = <&blsp2_i2c3_sleep>; |
| 3413 |
dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; |
| 3414 |
dma-names = "tx", "rx"; |
| 3415 |
#address-cells = <1>; |
| 3416 |
#size-cells = <0>; |
| 3417 |
status = "disabled"; |
| 3418 |
}; |
| 3419 |
|
| 3420 |
blsp2_i2c5: i2c@75b9000 { |
| 3421 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 3422 |
reg = <0x75b9000 0x1000>; |
| 3423 |
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| 3424 |
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, |
| 3425 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 3426 |
clock-names = "core", "iface"; |
| 3427 |
pinctrl-names = "default"; |
| 3428 |
pinctrl-0 = <&blsp2_i2c5_default>; |
| 3429 |
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; |
| 3430 |
dma-names = "tx", "rx"; |
| 3431 |
#address-cells = <1>; |
| 3432 |
#size-cells = <0>; |
| 3433 |
status = "disabled"; |
| 3434 |
}; |
| 3435 |
|
| 3436 |
blsp2_i2c6: i2c@75ba000 { |
| 3437 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 3438 |
reg = <0x75ba000 0x1000>; |
| 3439 |
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| 3440 |
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, |
| 3441 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 3442 |
clock-names = "core", "iface"; |
| 3443 |
pinctrl-names = "default", "sleep"; |
| 3444 |
pinctrl-0 = <&blsp2_i2c6_default>; |
| 3445 |
pinctrl-1 = <&blsp2_i2c6_sleep>; |
| 3446 |
dmas = <&blsp2_dma 22>, <&blsp2_dma 23>; |
| 3447 |
dma-names = "tx", "rx"; |
| 3448 |
#address-cells = <1>; |
| 3449 |
#size-cells = <0>; |
| 3450 |
status = "disabled"; |
| 3451 |
}; |
| 3452 |
|
| 3453 |
blsp2_spi6: spi@75ba000 { |
| 3454 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 3455 |
reg = <0x075ba000 0x600>; |
| 3456 |
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| 3457 |
clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>, |
| 3458 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 3459 |
clock-names = "core", "iface"; |
| 3460 |
pinctrl-names = "default", "sleep"; |
| 3461 |
pinctrl-0 = <&blsp2_spi6_default>; |
| 3462 |
pinctrl-1 = <&blsp2_spi6_sleep>; |
| 3463 |
dmas = <&blsp2_dma 22>, <&blsp2_dma 23>; |
| 3464 |
dma-names = "tx", "rx"; |
| 3465 |
#address-cells = <1>; |
| 3466 |
#size-cells = <0>; |
| 3467 |
status = "disabled"; |
| 3468 |
}; |
| 3469 |
|
| 3470 |
usb2: usb@76f8800 { |
| 3471 |
compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; |
| 3472 |
reg = <0x076f8800 0x400>; |
| 3473 |
#address-cells = <1>; |
| 3474 |
#size-cells = <1>; |
| 3475 |
ranges; |
| 3476 |
|
| 3477 |
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, |
| 3478 |
<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, |
| 3479 |
<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; |
| 3480 |
interrupt-names = "pwr_event", |
| 3481 |
"qusb2_phy", |
| 3482 |
"hs_phy_irq"; |
| 3483 |
|
| 3484 |
clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>, |
| 3485 |
<&gcc GCC_USB20_MASTER_CLK>, |
| 3486 |
<&gcc GCC_USB20_MOCK_UTMI_CLK>, |
| 3487 |
<&gcc GCC_USB20_SLEEP_CLK>, |
| 3488 |
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; |
| 3489 |
clock-names = "cfg_noc", |
| 3490 |
"core", |
| 3491 |
"iface", |
| 3492 |
"sleep", |
| 3493 |
"mock_utmi"; |
| 3494 |
|
| 3495 |
assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, |
| 3496 |
<&gcc GCC_USB20_MASTER_CLK>; |
| 3497 |
assigned-clock-rates = <19200000>, <60000000>; |
| 3498 |
|
| 3499 |
interconnects = <&pnoc MASTER_USB_HS &bimc SLAVE_EBI_CH0>, |
| 3500 |
<&bimc MASTER_AMPSS_M0 &pnoc SLAVE_USB_HS>; |
| 3501 |
interconnect-names = "usb-ddr", "apps-usb"; |
| 3502 |
power-domains = <&gcc USB30_GDSC>; |
| 3503 |
qcom,select-utmi-as-pipe-clk; |
| 3504 |
status = "disabled"; |
| 3505 |
|
| 3506 |
usb2_dwc3: usb@7600000 { |
| 3507 |
compatible = "snps,dwc3"; |
| 3508 |
reg = <0x07600000 0xcc00>; |
| 3509 |
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| 3510 |
phys = <&hsusb_phy2>; |
| 3511 |
phy-names = "usb2-phy"; |
| 3512 |
maximum-speed = "high-speed"; |
| 3513 |
snps,dis_u2_susphy_quirk; |
| 3514 |
snps,dis_enblslpm_quirk; |
| 3515 |
}; |
| 3516 |
}; |
| 3517 |
|
| 3518 |
slimbam: dma-controller@9184000 { |
| 3519 |
compatible = "qcom,bam-v1.7.0"; |
| 3520 |
qcom,controlled-remotely; |
| 3521 |
reg = <0x09184000 0x32000>; |
| 3522 |
num-channels = <31>; |
| 3523 |
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; |
| 3524 |
#dma-cells = <1>; |
| 3525 |
qcom,ee = <1>; |
| 3526 |
qcom,num-ees = <2>; |
| 3527 |
}; |
| 3528 |
|
| 3529 |
slim_msm: slim-ngd@91c0000 { |
| 3530 |
compatible = "qcom,slim-ngd-v1.5.0"; |
| 3531 |
reg = <0x091c0000 0x2c000>; |
| 3532 |
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; |
| 3533 |
dmas = <&slimbam 3>, <&slimbam 4>; |
| 3534 |
dma-names = "rx", "tx"; |
| 3535 |
#address-cells = <1>; |
| 3536 |
#size-cells = <0>; |
| 3537 |
|
| 3538 |
status = "disabled"; |
| 3539 |
}; |
| 3540 |
|
| 3541 |
adsp_pil: remoteproc@9300000 { |
| 3542 |
compatible = "qcom,msm8996-adsp-pil"; |
| 3543 |
reg = <0x09300000 0x80000>; |
| 3544 |
|
| 3545 |
interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, |
| 3546 |
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| 3547 |
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| 3548 |
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| 3549 |
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| 3550 |
interrupt-names = "wdog", "fatal", "ready", |
| 3551 |
"handover", "stop-ack"; |
| 3552 |
|
| 3553 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 3554 |
clock-names = "xo"; |
| 3555 |
|
| 3556 |
memory-region = <&adsp_mem>; |
| 3557 |
|
| 3558 |
qcom,smem-states = <&adsp_smp2p_out 0>; |
| 3559 |
qcom,smem-state-names = "stop"; |
| 3560 |
|
| 3561 |
power-domains = <&rpmpd MSM8996_VDDCX>; |
| 3562 |
power-domain-names = "cx"; |
| 3563 |
|
| 3564 |
status = "disabled"; |
| 3565 |
|
| 3566 |
glink-edge { |
| 3567 |
interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; |
| 3568 |
label = "lpass"; |
| 3569 |
qcom,remote-pid = <2>; |
| 3570 |
mboxes = <&apcs_glb 9>; |
| 3571 |
}; |
| 3572 |
|
| 3573 |
|
| 3574 |
smd-edge { |
| 3575 |
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; |
| 3576 |
|
| 3577 |
label = "lpass"; |
| 3578 |
mboxes = <&apcs_glb 8>; |
| 3579 |
qcom,smd-edge = <1>; |
| 3580 |
qcom,remote-pid = <2>; |
| 3581 |
|
| 3582 |
apr { |
| 3583 |
power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; |
| 3584 |
compatible = "qcom,apr-v2"; |
| 3585 |
qcom,smd-channels = "apr_audio_svc"; |
| 3586 |
qcom,domain = <APR_DOMAIN_ADSP>; |
| 3587 |
#address-cells = <1>; |
| 3588 |
#size-cells = <0>; |
| 3589 |
|
| 3590 |
service@3 { |
| 3591 |
reg = <APR_SVC_ADSP_CORE>; |
| 3592 |
compatible = "qcom,q6core"; |
| 3593 |
}; |
| 3594 |
|
| 3595 |
q6afe: service@4 { |
| 3596 |
compatible = "qcom,q6afe"; |
| 3597 |
reg = <APR_SVC_AFE>; |
| 3598 |
q6afedai: dais { |
| 3599 |
compatible = "qcom,q6afe-dais"; |
| 3600 |
#address-cells = <1>; |
| 3601 |
#size-cells = <0>; |
| 3602 |
#sound-dai-cells = <1>; |
| 3603 |
dai@1 { |
| 3604 |
reg = <1>; |
| 3605 |
}; |
| 3606 |
}; |
| 3607 |
}; |
| 3608 |
|
| 3609 |
q6asm: service@7 { |
| 3610 |
compatible = "qcom,q6asm"; |
| 3611 |
reg = <APR_SVC_ASM>; |
| 3612 |
q6asmdai: dais { |
| 3613 |
compatible = "qcom,q6asm-dais"; |
| 3614 |
#address-cells = <1>; |
| 3615 |
#size-cells = <0>; |
| 3616 |
#sound-dai-cells = <1>; |
| 3617 |
iommus = <&lpass_q6_smmu 1>; |
| 3618 |
}; |
| 3619 |
}; |
| 3620 |
|
| 3621 |
q6adm: service@8 { |
| 3622 |
compatible = "qcom,q6adm"; |
| 3623 |
reg = <APR_SVC_ADM>; |
| 3624 |
q6routing: routing { |
| 3625 |
compatible = "qcom,q6adm-routing"; |
| 3626 |
#sound-dai-cells = <0>; |
| 3627 |
}; |
| 3628 |
}; |
| 3629 |
}; |
| 3630 |
|
| 3631 |
fastrpc { |
| 3632 |
compatible = "qcom,fastrpc"; |
| 3633 |
qcom,smd-channels = "fastrpcsmd-apps-dsp"; |
| 3634 |
label = "adsp"; |
| 3635 |
qcom,non-secure-domain; |
| 3636 |
#address-cells = <1>; |
| 3637 |
#size-cells = <0>; |
| 3638 |
|
| 3639 |
cb@5 { |
| 3640 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3641 |
reg = <5>; |
| 3642 |
iommus = <&lpass_q6_smmu 5>; |
| 3643 |
}; |
| 3644 |
|
| 3645 |
cb@6 { |
| 3646 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3647 |
reg = <6>; |
| 3648 |
iommus = <&lpass_q6_smmu 6>; |
| 3649 |
}; |
| 3650 |
|
| 3651 |
cb@7 { |
| 3652 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3653 |
reg = <7>; |
| 3654 |
iommus = <&lpass_q6_smmu 7>; |
| 3655 |
}; |
| 3656 |
|
| 3657 |
cb@8 { |
| 3658 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3659 |
reg = <8>; |
| 3660 |
iommus = <&lpass_q6_smmu 8>; |
| 3661 |
}; |
| 3662 |
|
| 3663 |
cb@9 { |
| 3664 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3665 |
reg = <9>; |
| 3666 |
iommus = <&lpass_q6_smmu 9>; |
| 3667 |
}; |
| 3668 |
|
| 3669 |
cb@10 { |
| 3670 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3671 |
reg = <10>; |
| 3672 |
iommus = <&lpass_q6_smmu 10>; |
| 3673 |
}; |
| 3674 |
|
| 3675 |
cb@11 { |
| 3676 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3677 |
reg = <11>; |
| 3678 |
iommus = <&lpass_q6_smmu 11>; |
| 3679 |
}; |
| 3680 |
|
| 3681 |
cb@12 { |
| 3682 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3683 |
reg = <12>; |
| 3684 |
iommus = <&lpass_q6_smmu 12>; |
| 3685 |
}; |
| 3686 |
}; |
| 3687 |
}; |
| 3688 |
}; |
| 3689 |
|
| 3690 |
apcs_glb: mailbox@9820000 { |
| 3691 |
compatible = "qcom,msm8996-apcs-hmss-global"; |
| 3692 |
reg = <0x09820000 0x1000>; |
| 3693 |
|
| 3694 |
#mbox-cells = <1>; |
| 3695 |
#clock-cells = <0>; |
| 3696 |
}; |
| 3697 |
|
| 3698 |
timer@9840000 { |
| 3699 |
#address-cells = <1>; |
| 3700 |
#size-cells = <1>; |
| 3701 |
ranges; |
| 3702 |
compatible = "arm,armv7-timer-mem"; |
| 3703 |
reg = <0x09840000 0x1000>; |
| 3704 |
clock-frequency = <19200000>; |
| 3705 |
|
| 3706 |
frame@9850000 { |
| 3707 |
frame-number = <0>; |
| 3708 |
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, |
| 3709 |
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| 3710 |
reg = <0x09850000 0x1000>, |
| 3711 |
<0x09860000 0x1000>; |
| 3712 |
}; |
| 3713 |
|
| 3714 |
frame@9870000 { |
| 3715 |
frame-number = <1>; |
| 3716 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 3717 |
reg = <0x09870000 0x1000>; |
| 3718 |
status = "disabled"; |
| 3719 |
}; |
| 3720 |
|
| 3721 |
frame@9880000 { |
| 3722 |
frame-number = <2>; |
| 3723 |
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 3724 |
reg = <0x09880000 0x1000>; |
| 3725 |
status = "disabled"; |
| 3726 |
}; |
| 3727 |
|
| 3728 |
frame@9890000 { |
| 3729 |
frame-number = <3>; |
| 3730 |
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 3731 |
reg = <0x09890000 0x1000>; |
| 3732 |
status = "disabled"; |
| 3733 |
}; |
| 3734 |
|
| 3735 |
frame@98a0000 { |
| 3736 |
frame-number = <4>; |
| 3737 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 3738 |
reg = <0x098a0000 0x1000>; |
| 3739 |
status = "disabled"; |
| 3740 |
}; |
| 3741 |
|
| 3742 |
frame@98b0000 { |
| 3743 |
frame-number = <5>; |
| 3744 |
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 3745 |
reg = <0x098b0000 0x1000>; |
| 3746 |
status = "disabled"; |
| 3747 |
}; |
| 3748 |
|
| 3749 |
frame@98c0000 { |
| 3750 |
frame-number = <6>; |
| 3751 |
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 3752 |
reg = <0x098c0000 0x1000>; |
| 3753 |
status = "disabled"; |
| 3754 |
}; |
| 3755 |
}; |
| 3756 |
|
| 3757 |
saw3: syscon@9a10000 { |
| 3758 |
compatible = "syscon"; |
| 3759 |
reg = <0x09a10000 0x1000>; |
| 3760 |
}; |
| 3761 |
|
| 3762 |
cbf: clock-controller@9a11000 { |
| 3763 |
compatible = "qcom,msm8996-cbf"; |
| 3764 |
reg = <0x09a11000 0x10000>; |
| 3765 |
clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>; |
| 3766 |
#clock-cells = <0>; |
| 3767 |
#interconnect-cells = <1>; |
| 3768 |
}; |
| 3769 |
|
| 3770 |
intc: interrupt-controller@9bc0000 { |
| 3771 |
compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; |
| 3772 |
#address-cells = <0>; |
| 3773 |
#interrupt-cells = <3>; |
| 3774 |
interrupt-controller; |
| 3775 |
#redistributor-regions = <1>; |
| 3776 |
redistributor-stride = <0x0 0x40000>; |
| 3777 |
reg = <0x09bc0000 0x10000>, |
| 3778 |
<0x09c00000 0x100000>; |
| 3779 |
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 3780 |
}; |
| 3781 |
}; |
| 3782 |
|
| 3783 |
sound: sound { |
| 3784 |
}; |
| 3785 |
|
| 3786 |
thermal-zones { |
| 3787 |
cpu0-thermal { |
| 3788 |
polling-delay-passive = <250>; |
| 3789 |
|
| 3790 |
thermal-sensors = <&tsens0 3>; |
| 3791 |
|
| 3792 |
trips { |
| 3793 |
cpu0_alert0: trip-point0 { |
| 3794 |
temperature = <75000>; |
| 3795 |
hysteresis = <2000>; |
| 3796 |
type = "passive"; |
| 3797 |
}; |
| 3798 |
|
| 3799 |
cpu0_crit: cpu-crit { |
| 3800 |
temperature = <110000>; |
| 3801 |
hysteresis = <2000>; |
| 3802 |
type = "critical"; |
| 3803 |
}; |
| 3804 |
}; |
| 3805 |
}; |
| 3806 |
|
| 3807 |
cpu1-thermal { |
| 3808 |
polling-delay-passive = <250>; |
| 3809 |
|
| 3810 |
thermal-sensors = <&tsens0 5>; |
| 3811 |
|
| 3812 |
trips { |
| 3813 |
cpu1_alert0: trip-point0 { |
| 3814 |
temperature = <75000>; |
| 3815 |
hysteresis = <2000>; |
| 3816 |
type = "passive"; |
| 3817 |
}; |
| 3818 |
|
| 3819 |
cpu1_crit: cpu-crit { |
| 3820 |
temperature = <110000>; |
| 3821 |
hysteresis = <2000>; |
| 3822 |
type = "critical"; |
| 3823 |
}; |
| 3824 |
}; |
| 3825 |
}; |
| 3826 |
|
| 3827 |
cpu2-thermal { |
| 3828 |
polling-delay-passive = <250>; |
| 3829 |
|
| 3830 |
thermal-sensors = <&tsens0 8>; |
| 3831 |
|
| 3832 |
trips { |
| 3833 |
cpu2_alert0: trip-point0 { |
| 3834 |
temperature = <75000>; |
| 3835 |
hysteresis = <2000>; |
| 3836 |
type = "passive"; |
| 3837 |
}; |
| 3838 |
|
| 3839 |
cpu2_crit: cpu-crit { |
| 3840 |
temperature = <110000>; |
| 3841 |
hysteresis = <2000>; |
| 3842 |
type = "critical"; |
| 3843 |
}; |
| 3844 |
}; |
| 3845 |
}; |
| 3846 |
|
| 3847 |
cpu3-thermal { |
| 3848 |
polling-delay-passive = <250>; |
| 3849 |
|
| 3850 |
thermal-sensors = <&tsens0 10>; |
| 3851 |
|
| 3852 |
trips { |
| 3853 |
cpu3_alert0: trip-point0 { |
| 3854 |
temperature = <75000>; |
| 3855 |
hysteresis = <2000>; |
| 3856 |
type = "passive"; |
| 3857 |
}; |
| 3858 |
|
| 3859 |
cpu3_crit: cpu-crit { |
| 3860 |
temperature = <110000>; |
| 3861 |
hysteresis = <2000>; |
| 3862 |
type = "critical"; |
| 3863 |
}; |
| 3864 |
}; |
| 3865 |
}; |
| 3866 |
|
| 3867 |
gpu-top-thermal { |
| 3868 |
polling-delay-passive = <250>; |
| 3869 |
|
| 3870 |
thermal-sensors = <&tsens1 6>; |
| 3871 |
|
| 3872 |
trips { |
| 3873 |
gpu1_alert0: trip-point0 { |
| 3874 |
temperature = <90000>; |
| 3875 |
hysteresis = <2000>; |
| 3876 |
type = "passive"; |
| 3877 |
}; |
| 3878 |
}; |
| 3879 |
|
| 3880 |
cooling-maps { |
| 3881 |
map0 { |
| 3882 |
trip = <&gpu1_alert0>; |
| 3883 |
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 3884 |
}; |
| 3885 |
}; |
| 3886 |
}; |
| 3887 |
|
| 3888 |
gpu-bottom-thermal { |
| 3889 |
polling-delay-passive = <250>; |
| 3890 |
|
| 3891 |
thermal-sensors = <&tsens1 7>; |
| 3892 |
|
| 3893 |
trips { |
| 3894 |
gpu2_alert0: trip-point0 { |
| 3895 |
temperature = <90000>; |
| 3896 |
hysteresis = <2000>; |
| 3897 |
type = "passive"; |
| 3898 |
}; |
| 3899 |
}; |
| 3900 |
|
| 3901 |
cooling-maps { |
| 3902 |
map0 { |
| 3903 |
trip = <&gpu2_alert0>; |
| 3904 |
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 3905 |
}; |
| 3906 |
}; |
| 3907 |
}; |
| 3908 |
|
| 3909 |
m4m-thermal { |
| 3910 |
polling-delay-passive = <250>; |
| 3911 |
|
| 3912 |
thermal-sensors = <&tsens0 1>; |
| 3913 |
|
| 3914 |
trips { |
| 3915 |
m4m_alert0: trip-point0 { |
| 3916 |
temperature = <90000>; |
| 3917 |
hysteresis = <2000>; |
| 3918 |
type = "hot"; |
| 3919 |
}; |
| 3920 |
}; |
| 3921 |
}; |
| 3922 |
|
| 3923 |
l3-or-venus-thermal { |
| 3924 |
polling-delay-passive = <250>; |
| 3925 |
|
| 3926 |
thermal-sensors = <&tsens0 2>; |
| 3927 |
|
| 3928 |
trips { |
| 3929 |
l3_or_venus_alert0: trip-point0 { |
| 3930 |
temperature = <90000>; |
| 3931 |
hysteresis = <2000>; |
| 3932 |
type = "hot"; |
| 3933 |
}; |
| 3934 |
}; |
| 3935 |
}; |
| 3936 |
|
| 3937 |
cluster0-l2-thermal { |
| 3938 |
polling-delay-passive = <250>; |
| 3939 |
|
| 3940 |
thermal-sensors = <&tsens0 7>; |
| 3941 |
|
| 3942 |
trips { |
| 3943 |
cluster0_l2_alert0: trip-point0 { |
| 3944 |
temperature = <90000>; |
| 3945 |
hysteresis = <2000>; |
| 3946 |
type = "hot"; |
| 3947 |
}; |
| 3948 |
}; |
| 3949 |
}; |
| 3950 |
|
| 3951 |
cluster1-l2-thermal { |
| 3952 |
polling-delay-passive = <250>; |
| 3953 |
|
| 3954 |
thermal-sensors = <&tsens0 12>; |
| 3955 |
|
| 3956 |
trips { |
| 3957 |
cluster1_l2_alert0: trip-point0 { |
| 3958 |
temperature = <90000>; |
| 3959 |
hysteresis = <2000>; |
| 3960 |
type = "hot"; |
| 3961 |
}; |
| 3962 |
}; |
| 3963 |
}; |
| 3964 |
|
| 3965 |
camera-thermal { |
| 3966 |
polling-delay-passive = <250>; |
| 3967 |
|
| 3968 |
thermal-sensors = <&tsens1 1>; |
| 3969 |
|
| 3970 |
trips { |
| 3971 |
camera_alert0: trip-point0 { |
| 3972 |
temperature = <90000>; |
| 3973 |
hysteresis = <2000>; |
| 3974 |
type = "hot"; |
| 3975 |
}; |
| 3976 |
}; |
| 3977 |
}; |
| 3978 |
|
| 3979 |
q6-dsp-thermal { |
| 3980 |
polling-delay-passive = <250>; |
| 3981 |
|
| 3982 |
thermal-sensors = <&tsens1 2>; |
| 3983 |
|
| 3984 |
trips { |
| 3985 |
q6_dsp_alert0: trip-point0 { |
| 3986 |
temperature = <90000>; |
| 3987 |
hysteresis = <2000>; |
| 3988 |
type = "hot"; |
| 3989 |
}; |
| 3990 |
}; |
| 3991 |
}; |
| 3992 |
|
| 3993 |
mem-thermal { |
| 3994 |
polling-delay-passive = <250>; |
| 3995 |
|
| 3996 |
thermal-sensors = <&tsens1 3>; |
| 3997 |
|
| 3998 |
trips { |
| 3999 |
mem_alert0: trip-point0 { |
| 4000 |
temperature = <90000>; |
| 4001 |
hysteresis = <2000>; |
| 4002 |
type = "hot"; |
| 4003 |
}; |
| 4004 |
}; |
| 4005 |
}; |
| 4006 |
|
| 4007 |
modemtx-thermal { |
| 4008 |
polling-delay-passive = <250>; |
| 4009 |
|
| 4010 |
thermal-sensors = <&tsens1 4>; |
| 4011 |
|
| 4012 |
trips { |
| 4013 |
modemtx_alert0: trip-point0 { |
| 4014 |
temperature = <90000>; |
| 4015 |
hysteresis = <2000>; |
| 4016 |
type = "hot"; |
| 4017 |
}; |
| 4018 |
}; |
| 4019 |
}; |
| 4020 |
}; |
| 4021 |
|
| 4022 |
timer { |
| 4023 |
compatible = "arm,armv8-timer"; |
| 4024 |
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, |
| 4025 |
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, |
| 4026 |
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, |
| 4027 |
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; |
| 4028 |
}; |
| 4029 |
}; |