| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2020, Yassine Oudjana <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
#include "pm8994.dtsi" |
| 7 |
#include "pmi8994.dtsi" |
| 8 |
#include <dt-bindings/input/input.h> |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/leds/common.h> |
| 11 |
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
divclk1_cdc: divclk1 { |
| 15 |
compatible = "gpio-gate-clock"; |
| 16 |
clocks = <&rpmcc RPM_SMD_DIV_CLK1>; |
| 17 |
#clock-cells = <0>; |
| 18 |
enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>; |
| 19 |
|
| 20 |
pinctrl-names = "default"; |
| 21 |
pinctrl-0 = <&divclk1_default>; |
| 22 |
}; |
| 23 |
|
| 24 |
divclk4: divclk4 { |
| 25 |
compatible = "fixed-clock"; |
| 26 |
#clock-cells = <0>; |
| 27 |
clock-frequency = <32768>; |
| 28 |
clock-output-names = "divclk4"; |
| 29 |
|
| 30 |
pinctrl-names = "default"; |
| 31 |
pinctrl-0 = <&divclk4_pin_a>; |
| 32 |
}; |
| 33 |
|
| 34 |
gpio-keys { |
| 35 |
compatible = "gpio-keys"; |
| 36 |
|
| 37 |
key-vol-up { |
| 38 |
label = "Volume Up"; |
| 39 |
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; |
| 40 |
linux,code = <KEY_VOLUMEUP>; |
| 41 |
wakeup-source; |
| 42 |
debounce-interval = <15>; |
| 43 |
}; |
| 44 |
|
| 45 |
key-dome { |
| 46 |
label = "Home"; |
| 47 |
gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; |
| 48 |
linux,code = <KEY_HOME>; |
| 49 |
wakeup-source; |
| 50 |
debounce-interval = <15>; |
| 51 |
}; |
| 52 |
}; |
| 53 |
|
| 54 |
irled { |
| 55 |
compatible = "pwm-ir-tx"; |
| 56 |
pwms = <&pm8994_lpg 1 1000000>; |
| 57 |
|
| 58 |
pinctrl-names = "default"; |
| 59 |
pinctrl-0 = <&irled_default>; |
| 60 |
}; |
| 61 |
|
| 62 |
reserved-memory { |
| 63 |
memory@88800000 { |
| 64 |
reg = <0x0 0x88800000 0x0 0x1400000>; |
| 65 |
no-map; |
| 66 |
}; |
| 67 |
|
| 68 |
/* This platform has all PIL regions offset by 0x1400000 */ |
| 69 |
/delete-node/ mpss@88800000; |
| 70 |
mpss_mem: mpss@89c00000 { |
| 71 |
reg = <0x0 0x89c00000 0x0 0x6200000>; |
| 72 |
no-map; |
| 73 |
}; |
| 74 |
|
| 75 |
/delete-node/ adsp@8ea00000; |
| 76 |
adsp_mem: adsp@8fe00000 { |
| 77 |
reg = <0x0 0x8fe00000 0x0 0x1b00000>; |
| 78 |
no-map; |
| 79 |
}; |
| 80 |
|
| 81 |
/delete-node/ slpi@90500000; |
| 82 |
slpi_mem: slpi@91900000 { |
| 83 |
reg = <0x0 0x91900000 0x0 0xa00000>; |
| 84 |
no-map; |
| 85 |
}; |
| 86 |
|
| 87 |
/delete-node/ gpu@90f00000; |
| 88 |
gpu_mem: gpu@92300000 { |
| 89 |
compatible = "shared-dma-pool"; |
| 90 |
reg = <0x0 0x92300000 0x0 0x2000>; |
| 91 |
no-map; |
| 92 |
}; |
| 93 |
|
| 94 |
/delete-node/ venus@91000000; |
| 95 |
venus_mem: venus@92400000 { |
| 96 |
reg = <0x0 0x92400000 0x0 0x500000>; |
| 97 |
no-map; |
| 98 |
}; |
| 99 |
|
| 100 |
ramoops@92900000 { |
| 101 |
compatible = "ramoops"; |
| 102 |
reg = <0x0 0x92900000 0x0 0x100000>; |
| 103 |
no-map; |
| 104 |
|
| 105 |
record-size = <0x8000>; |
| 106 |
console-size = <0x80000>; |
| 107 |
ftrace-size = <0x20000>; |
| 108 |
pmsg-size = <0x40000>; |
| 109 |
}; |
| 110 |
|
| 111 |
/delete-node/ rmtfs; |
| 112 |
rmtfs@f6c00000 { |
| 113 |
compatible = "qcom,rmtfs-mem"; |
| 114 |
reg = <0 0xf6c00000 0 0x200000>; |
| 115 |
no-map; |
| 116 |
|
| 117 |
qcom,client-id = <1>; |
| 118 |
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; |
| 119 |
}; |
| 120 |
|
| 121 |
/delete-node/ mba@91500000; |
| 122 |
mba_mem: mba@f6f00000 { |
| 123 |
reg = <0x0 0xf6f00000 0x0 0x100000>; |
| 124 |
no-map; |
| 125 |
}; |
| 126 |
}; |
| 127 |
|
| 128 |
vph_pwr: vph-pwr-regulator { |
| 129 |
compatible = "regulator-fixed"; |
| 130 |
regulator-name = "vph_pwr"; |
| 131 |
regulator-min-microvolt = <3800000>; |
| 132 |
regulator-max-microvolt = <3800000>; |
| 133 |
regulator-always-on; |
| 134 |
regulator-boot-on; |
| 135 |
}; |
| 136 |
|
| 137 |
vdd_3v2_tp: vdd-3v2-tp { |
| 138 |
compatible = "regulator-fixed"; |
| 139 |
regulator-name = "vdd_3v2_tp"; |
| 140 |
regulator-min-microvolt = <3200000>; |
| 141 |
regulator-max-microvolt = <3200000>; |
| 142 |
startup-delay-us = <4000>; |
| 143 |
vin-supply = <&vph_pwr>; |
| 144 |
|
| 145 |
gpio = <&tlmm 73 0>; |
| 146 |
enable-active-high; |
| 147 |
}; |
| 148 |
|
| 149 |
vdd_3v3: rome-vreg { |
| 150 |
compatible = "regulator-fixed"; |
| 151 |
regulator-name = "vdd_3v3"; |
| 152 |
regulator-min-microvolt = <3300000>; |
| 153 |
regulator-max-microvolt = <3300000>; |
| 154 |
startup-delay-us = <4000>; |
| 155 |
vin-supply = <&vph_pwr_bbyp>; |
| 156 |
|
| 157 |
gpio = <&pm8994_gpios 9 0>; |
| 158 |
enable-active-high; |
| 159 |
pinctrl-names = "default"; |
| 160 |
pinctrl-0 = <&rome_enable_default>; |
| 161 |
|
| 162 |
/* Required by QCA6174a - vddpe-3v3 */ |
| 163 |
regulator-always-on; |
| 164 |
}; |
| 165 |
|
| 166 |
/* WL_EN pin defined as a fixed regulator */ |
| 167 |
wlan_en: wlan-en-1-8v { |
| 168 |
compatible = "regulator-fixed"; |
| 169 |
regulator-name = "wlan-en-regulator"; |
| 170 |
regulator-min-microvolt = <1800000>; |
| 171 |
regulator-max-microvolt = <1800000>; |
| 172 |
|
| 173 |
gpio = <&pm8994_gpios 8 0>; |
| 174 |
/* WLAN card specific delay */ |
| 175 |
startup-delay-us = <70000>; |
| 176 |
enable-active-high; |
| 177 |
pinctrl-names = "default"; |
| 178 |
pinctrl-0 = <&wlan_en_default>; |
| 179 |
}; |
| 180 |
}; |
| 181 |
|
| 182 |
&adsp_pil { |
| 183 |
status = "okay"; |
| 184 |
}; |
| 185 |
|
| 186 |
&blsp2_i2c2 { |
| 187 |
status = "okay"; |
| 188 |
clock-frequency = <400000>; |
| 189 |
|
| 190 |
nfc: nfc@28 { |
| 191 |
compatible = "nxp,nxp-nci-i2c"; |
| 192 |
|
| 193 |
reg = <0x28>; |
| 194 |
|
| 195 |
interrupt-parent = <&tlmm>; |
| 196 |
interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; |
| 197 |
|
| 198 |
enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; |
| 199 |
firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; |
| 200 |
|
| 201 |
pinctrl-names = "default"; |
| 202 |
pinctrl-0 = <&nfc_default>; |
| 203 |
}; |
| 204 |
}; |
| 205 |
|
| 206 |
&blsp2_i2c3 { |
| 207 |
status = "okay"; |
| 208 |
|
| 209 |
typec: typec@47 { |
| 210 |
compatible = "ti,tusb320l"; |
| 211 |
reg = <0x47>; |
| 212 |
interrupt-parent = <&tlmm>; |
| 213 |
interrupts = <63 IRQ_TYPE_EDGE_RISING>; |
| 214 |
}; |
| 215 |
}; |
| 216 |
|
| 217 |
&blsp2_i2c6 { |
| 218 |
status = "okay"; |
| 219 |
/* MSM_TS */ |
| 220 |
}; |
| 221 |
|
| 222 |
&blsp1_uart2 { |
| 223 |
status = "okay"; |
| 224 |
label = "QCA_UART"; |
| 225 |
|
| 226 |
bluetooth: bluetooth { |
| 227 |
compatible = "qcom,qca6174-bt"; |
| 228 |
|
| 229 |
enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; |
| 230 |
clocks = <&divclk4>; |
| 231 |
}; |
| 232 |
}; |
| 233 |
|
| 234 |
&gpu { |
| 235 |
status = "okay"; |
| 236 |
}; |
| 237 |
|
| 238 |
&mdss { |
| 239 |
status = "okay"; |
| 240 |
}; |
| 241 |
|
| 242 |
&mdss_dsi0 { |
| 243 |
status = "okay"; |
| 244 |
|
| 245 |
vdd-supply = <&vreg_l2a_1p25>; |
| 246 |
vddio-supply = <&vreg_l14a_1p8>; |
| 247 |
|
| 248 |
pinctrl-names = "default", "sleep"; |
| 249 |
pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; |
| 250 |
pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; |
| 251 |
}; |
| 252 |
|
| 253 |
&mdss_dsi0_out { |
| 254 |
status = "okay"; |
| 255 |
|
| 256 |
data-lanes = <0 1 2 3>; |
| 257 |
}; |
| 258 |
|
| 259 |
&mdss_dsi0_phy { |
| 260 |
status = "okay"; |
| 261 |
|
| 262 |
vcca-supply = <&vreg_l28a_0p925>; |
| 263 |
}; |
| 264 |
|
| 265 |
&mmcc { |
| 266 |
vdd-gfx-supply = <&vdd_gfx>; |
| 267 |
}; |
| 268 |
|
| 269 |
&mss_pil { |
| 270 |
status = "okay"; |
| 271 |
|
| 272 |
pll-supply = <&vreg_l12a_1p8>; |
| 273 |
}; |
| 274 |
|
| 275 |
&pcie0 { |
| 276 |
status = "okay"; |
| 277 |
|
| 278 |
/* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */ |
| 279 |
vddpe-3v3-supply = <&wlan_en>; |
| 280 |
vdda-supply = <&vreg_l28a_0p925>; |
| 281 |
|
| 282 |
perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; |
| 283 |
wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; |
| 284 |
}; |
| 285 |
|
| 286 |
&pcie_phy { |
| 287 |
status = "okay"; |
| 288 |
|
| 289 |
vdda-phy-supply = <&vreg_l28a_0p925>; |
| 290 |
vdda-pll-supply = <&vreg_l12a_1p8>; |
| 291 |
}; |
| 292 |
|
| 293 |
&pm8994_resin { |
| 294 |
status = "okay"; |
| 295 |
|
| 296 |
linux,code = <KEY_VOLUMEDOWN>; |
| 297 |
}; |
| 298 |
|
| 299 |
&pm8994_lpg { |
| 300 |
status = "okay"; |
| 301 |
|
| 302 |
qcom,power-source = <1>; |
| 303 |
}; |
| 304 |
|
| 305 |
&pmi8994_lpg { |
| 306 |
status = "okay"; |
| 307 |
|
| 308 |
qcom,power-source = <1>; |
| 309 |
|
| 310 |
multi-led { |
| 311 |
color = <LED_COLOR_ID_RGB>; |
| 312 |
function = LED_FUNCTION_STATUS; |
| 313 |
|
| 314 |
#address-cells = <1>; |
| 315 |
#size-cells = <0>; |
| 316 |
|
| 317 |
led@1 { |
| 318 |
reg = <1>; |
| 319 |
color = <LED_COLOR_ID_BLUE>; |
| 320 |
}; |
| 321 |
|
| 322 |
led@2 { |
| 323 |
reg = <2>; |
| 324 |
color = <LED_COLOR_ID_GREEN>; |
| 325 |
}; |
| 326 |
|
| 327 |
led@3 { |
| 328 |
reg = <3>; |
| 329 |
color = <LED_COLOR_ID_RED>; |
| 330 |
}; |
| 331 |
}; |
| 332 |
}; |
| 333 |
|
| 334 |
&slim_msm { |
| 335 |
status = "okay"; |
| 336 |
|
| 337 |
slim@1 { |
| 338 |
reg = <1>; |
| 339 |
#address-cells = <2>; |
| 340 |
#size-cells = <0>; |
| 341 |
|
| 342 |
tasha_ifd: tas-ifd@0,0 { |
| 343 |
compatible = "slim217,1a0"; |
| 344 |
reg = <0 0>; |
| 345 |
}; |
| 346 |
|
| 347 |
wcd9335: codec@1,0 { |
| 348 |
compatible = "slim217,1a0"; |
| 349 |
reg = <1 0>; |
| 350 |
|
| 351 |
clock-names = "mclk", "slimbus"; |
| 352 |
clocks = <&divclk1_cdc>, |
| 353 |
<&rpmcc RPM_SMD_BB_CLK1>; |
| 354 |
interrupt-parent = <&tlmm>; |
| 355 |
interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, |
| 356 |
<53 IRQ_TYPE_LEVEL_HIGH>; |
| 357 |
interrupt-names = "intr1", "intr2"; |
| 358 |
interrupt-controller; |
| 359 |
#interrupt-cells = <1>; |
| 360 |
|
| 361 |
pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; |
| 362 |
pinctrl-names = "default"; |
| 363 |
|
| 364 |
reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; |
| 365 |
slim-ifc-dev = <&tasha_ifd>; |
| 366 |
|
| 367 |
#sound-dai-cells = <1>; |
| 368 |
|
| 369 |
vdd-buck-supply = <&vreg_s4a_1p8>; |
| 370 |
vdd-buck-sido-supply = <&vreg_s4a_1p8>; |
| 371 |
vdd-rx-supply = <&vreg_s4a_1p8>; |
| 372 |
vdd-tx-supply = <&vreg_s4a_1p8>; |
| 373 |
vdd-vbat-supply = <&vph_pwr>; |
| 374 |
vdd-micbias-supply = <&vph_pwr_bbyp>; |
| 375 |
vdd-io-supply = <&vreg_s4a_1p8>; |
| 376 |
}; |
| 377 |
}; |
| 378 |
}; |
| 379 |
|
| 380 |
&slpi_pil { |
| 381 |
status = "okay"; |
| 382 |
|
| 383 |
px-supply = <&vreg_lvs2a_1p8>; |
| 384 |
}; |
| 385 |
|
| 386 |
&usb3 { |
| 387 |
status = "okay"; |
| 388 |
extcon = <&typec>; |
| 389 |
|
| 390 |
qcom,select-utmi-as-pipe-clk; |
| 391 |
}; |
| 392 |
|
| 393 |
&usb3_dwc3 { |
| 394 |
extcon = <&typec>; |
| 395 |
|
| 396 |
/* usb3-phy is not used on this device */ |
| 397 |
phys = <&hsusb_phy1>; |
| 398 |
phy-names = "usb2-phy"; |
| 399 |
|
| 400 |
maximum-speed = "high-speed"; |
| 401 |
snps,is-utmi-l1-suspend; |
| 402 |
snps,usb2-gadget-lpm-disable; |
| 403 |
snps,hird-threshold = /bits/ 8 <0>; |
| 404 |
}; |
| 405 |
|
| 406 |
&hsusb_phy1 { |
| 407 |
status = "okay"; |
| 408 |
|
| 409 |
vdda-pll-supply = <&vreg_l12a_1p8>; |
| 410 |
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; |
| 411 |
}; |
| 412 |
|
| 413 |
&ufshc { |
| 414 |
status = "okay"; |
| 415 |
|
| 416 |
vcc-supply = <&vreg_l20a_2p95>; |
| 417 |
vccq-supply = <&vreg_l25a_1p2>; |
| 418 |
vccq2-supply = <&vreg_s4a_1p8>; |
| 419 |
vdd-hba-supply = <&vreg_l25a_1p2>; |
| 420 |
|
| 421 |
vcc-max-microamp = <600000>; |
| 422 |
vccq-max-microamp = <450000>; |
| 423 |
vccq2-max-microamp = <450000>; |
| 424 |
}; |
| 425 |
|
| 426 |
&ufsphy { |
| 427 |
status = "okay"; |
| 428 |
|
| 429 |
vdda-phy-supply = <&vreg_l28a_0p925>; |
| 430 |
vdda-pll-supply = <&vreg_l12a_1p8>; |
| 431 |
}; |
| 432 |
|
| 433 |
&venus { |
| 434 |
status = "okay"; |
| 435 |
}; |
| 436 |
|
| 437 |
&rpm_requests { |
| 438 |
regulators-0 { |
| 439 |
compatible = "qcom,rpm-pm8994-regulators"; |
| 440 |
|
| 441 |
vdd_s1-supply = <&vph_pwr>; |
| 442 |
vdd_s2-supply = <&vph_pwr>; |
| 443 |
vdd_s3-supply = <&vph_pwr>; |
| 444 |
vdd_s4-supply = <&vph_pwr>; |
| 445 |
vdd_s5-supply = <&vph_pwr>; |
| 446 |
vdd_s6-supply = <&vph_pwr>; |
| 447 |
vdd_s7-supply = <&vph_pwr>; |
| 448 |
vdd_s8-supply = <&vph_pwr>; |
| 449 |
vdd_s9-supply = <&vph_pwr>; |
| 450 |
vdd_s10-supply = <&vph_pwr>; |
| 451 |
vdd_s11-supply = <&vph_pwr>; |
| 452 |
vdd_s12-supply = <&vph_pwr>; |
| 453 |
vdd_l1-supply = <&vreg_s1b_1p025>; |
| 454 |
vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; |
| 455 |
vdd_l3_l11-supply = <&vreg_s3a_1p3>; |
| 456 |
vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; |
| 457 |
vdd_l5_l7-supply = <&vreg_s5a_2p15>; |
| 458 |
vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; |
| 459 |
vdd_l8_l16_l30-supply = <&vph_pwr>; |
| 460 |
vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; |
| 461 |
vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; |
| 462 |
vdd_l14_l15-supply = <&vreg_s5a_2p15>; |
| 463 |
vdd_l17_l29-supply = <&vph_pwr_bbyp>; |
| 464 |
vdd_l20_l21-supply = <&vph_pwr_bbyp>; |
| 465 |
vdd_l25-supply = <&vreg_s3a_1p3>; |
| 466 |
vdd_lvs1_2-supply = <&vreg_s4a_1p8>; |
| 467 |
|
| 468 |
vreg_s3a_1p3: s3 { |
| 469 |
regulator-name = "vreg_s3a_1p3"; |
| 470 |
regulator-min-microvolt = <1300000>; |
| 471 |
regulator-max-microvolt = <1300000>; |
| 472 |
|
| 473 |
/* Required by QCA6174a - vdd-core */ |
| 474 |
regulator-always-on; |
| 475 |
}; |
| 476 |
vreg_s4a_1p8: s4 { |
| 477 |
regulator-name = "vreg_s4a_1p8"; |
| 478 |
regulator-min-microvolt = <1800000>; |
| 479 |
regulator-max-microvolt = <1800000>; |
| 480 |
regulator-allow-set-load; |
| 481 |
|
| 482 |
/* Required by QCA6174a - vddio */ |
| 483 |
regulator-always-on; |
| 484 |
}; |
| 485 |
vreg_s5a_2p15: s5 { |
| 486 |
regulator-name = "vreg_s5a_2p15"; |
| 487 |
regulator-min-microvolt = <2150000>; |
| 488 |
regulator-max-microvolt = <2150000>; |
| 489 |
}; |
| 490 |
vreg_s7a_0p8: s7 { |
| 491 |
regulator-name = "vreg_s7a_0p8"; |
| 492 |
regulator-min-microvolt = <800000>; |
| 493 |
regulator-max-microvolt = <800000>; |
| 494 |
}; |
| 495 |
vreg_l1a_1p0: l1 { |
| 496 |
regulator-name = "vreg_l1a_1p0"; |
| 497 |
regulator-min-microvolt = <1000000>; |
| 498 |
regulator-max-microvolt = <1000000>; |
| 499 |
}; |
| 500 |
vreg_l2a_1p25: l2 { |
| 501 |
regulator-name = "vreg_l2a_1p25"; |
| 502 |
regulator-min-microvolt = <1250000>; |
| 503 |
regulator-max-microvolt = <1250000>; |
| 504 |
}; |
| 505 |
vreg_l4a_1p225: l4 { |
| 506 |
regulator-name = "vreg_l4a_1p225"; |
| 507 |
regulator-min-microvolt = <1225000>; |
| 508 |
regulator-max-microvolt = <1225000>; |
| 509 |
}; |
| 510 |
vreg_l6a_1p8: l6 { |
| 511 |
regulator-name = "vreg_l6a_1p8"; |
| 512 |
regulator-min-microvolt = <1800000>; |
| 513 |
regulator-max-microvolt = <1800000>; |
| 514 |
}; |
| 515 |
vreg_l8a_1p8: l8 { |
| 516 |
regulator-name = "vreg_l8a_1p8"; |
| 517 |
regulator-min-microvolt = <1800000>; |
| 518 |
regulator-max-microvolt = <1800000>; |
| 519 |
}; |
| 520 |
vreg_l9a_1p8: l9 { |
| 521 |
regulator-name = "vreg_l9a_1p8"; |
| 522 |
regulator-min-microvolt = <1800000>; |
| 523 |
regulator-max-microvolt = <1800000>; |
| 524 |
}; |
| 525 |
vreg_l10a_1p8: l10 { |
| 526 |
regulator-name = "vreg_l10a_1p8"; |
| 527 |
regulator-min-microvolt = <1800000>; |
| 528 |
regulator-max-microvolt = <1800000>; |
| 529 |
}; |
| 530 |
vreg_l12a_1p8: l12 { |
| 531 |
regulator-name = "vreg_l12a_1p8"; |
| 532 |
regulator-min-microvolt = <1800000>; |
| 533 |
regulator-max-microvolt = <1800000>; |
| 534 |
regulator-allow-set-load; |
| 535 |
}; |
| 536 |
vreg_l13a_2p95: l13 { |
| 537 |
regulator-name = "vreg_l13a_2p95"; |
| 538 |
regulator-min-microvolt = <1800000>; |
| 539 |
regulator-max-microvolt = <2950000>; |
| 540 |
}; |
| 541 |
vreg_l14a_1p8: l14 { |
| 542 |
regulator-name = "vreg_l14a_1p8"; |
| 543 |
regulator-min-microvolt = <1800000>; |
| 544 |
regulator-max-microvolt = <1800000>; |
| 545 |
}; |
| 546 |
vreg_l15a_1p8: l15 { |
| 547 |
regulator-name = "vreg_l15a_1p8"; |
| 548 |
regulator-min-microvolt = <1800000>; |
| 549 |
regulator-max-microvolt = <1800000>; |
| 550 |
}; |
| 551 |
vreg_l16a_2p7: l16 { |
| 552 |
regulator-name = "vreg_l16a_2p7"; |
| 553 |
regulator-min-microvolt = <2700000>; |
| 554 |
regulator-max-microvolt = <2700000>; |
| 555 |
}; |
| 556 |
vreg_l19a_3p3: l19 { |
| 557 |
regulator-name = "vreg_l19a_3p3"; |
| 558 |
regulator-min-microvolt = <3000000>; |
| 559 |
regulator-max-microvolt = <3000000>; |
| 560 |
}; |
| 561 |
vreg_l20a_2p95: l20 { |
| 562 |
regulator-name = "vreg_l20a_2p95"; |
| 563 |
regulator-min-microvolt = <2950000>; |
| 564 |
regulator-max-microvolt = <2950000>; |
| 565 |
regulator-allow-set-load; |
| 566 |
}; |
| 567 |
vreg_l21a_2p95: l21 { |
| 568 |
regulator-name = "vreg_l21a_2p95"; |
| 569 |
regulator-min-microvolt = <3300000>; |
| 570 |
regulator-max-microvolt = <3300000>; |
| 571 |
regulator-always-on; |
| 572 |
}; |
| 573 |
vreg_l23a_2p8: l23 { |
| 574 |
regulator-name = "vreg_l23a_2p8"; |
| 575 |
regulator-min-microvolt = <2800000>; |
| 576 |
regulator-max-microvolt = <2800000>; |
| 577 |
}; |
| 578 |
vreg_l24a_3p075: l24 { |
| 579 |
regulator-name = "vreg_l24a_3p075"; |
| 580 |
regulator-min-microvolt = <3075000>; |
| 581 |
regulator-max-microvolt = <3075000>; |
| 582 |
}; |
| 583 |
vreg_l25a_1p2: l25 { |
| 584 |
regulator-name = "vreg_l25a_1p2"; |
| 585 |
regulator-min-microvolt = <1200000>; |
| 586 |
regulator-max-microvolt = <1200000>; |
| 587 |
regulator-allow-set-load; |
| 588 |
}; |
| 589 |
vreg_l27a_1p2: l27 { |
| 590 |
regulator-name = "vreg_l27a_1p2"; |
| 591 |
regulator-min-microvolt = <1200000>; |
| 592 |
regulator-max-microvolt = <1200000>; |
| 593 |
}; |
| 594 |
vreg_l28a_0p925: l28 { |
| 595 |
regulator-name = "vreg_l28a_0p925"; |
| 596 |
regulator-min-microvolt = <925000>; |
| 597 |
regulator-max-microvolt = <925000>; |
| 598 |
regulator-allow-set-load; |
| 599 |
}; |
| 600 |
vreg_l30a_1p8: l30 { |
| 601 |
regulator-name = "vreg_l30a_1p8"; |
| 602 |
regulator-min-microvolt = <1800000>; |
| 603 |
regulator-max-microvolt = <1800000>; |
| 604 |
|
| 605 |
/* Required by QCA6174a - vddio-xtal */ |
| 606 |
regulator-always-on; |
| 607 |
}; |
| 608 |
vreg_l32a_1p8: l32 { |
| 609 |
regulator-name = "vreg_l32a_1p8"; |
| 610 |
regulator-min-microvolt = <1800000>; |
| 611 |
regulator-max-microvolt = <1800000>; |
| 612 |
}; |
| 613 |
vreg_lvs1a_1p8: lvs1 { |
| 614 |
regulator-min-microvolt = <1800000>; |
| 615 |
regulator-max-microvolt = <1800000>; |
| 616 |
}; |
| 617 |
vreg_lvs2a_1p8: lvs2 { |
| 618 |
regulator-min-microvolt = <1800000>; |
| 619 |
regulator-max-microvolt = <1800000>; |
| 620 |
}; |
| 621 |
}; |
| 622 |
|
| 623 |
regulators-1 { |
| 624 |
compatible = "qcom,rpm-pmi8994-regulators"; |
| 625 |
|
| 626 |
vdd_s1-supply = <&vph_pwr>; |
| 627 |
vdd_s2-supply = <&vph_pwr>; |
| 628 |
vdd_s3-supply = <&vph_pwr>; |
| 629 |
vdd_bst_byp-supply = <&vph_pwr>; |
| 630 |
|
| 631 |
vreg_s1b_1p025: s1 { |
| 632 |
regulator-name = "vreg_s1b_1p025"; |
| 633 |
regulator-min-microvolt = <1025000>; |
| 634 |
regulator-max-microvolt = <1025000>; |
| 635 |
}; |
| 636 |
|
| 637 |
vph_pwr_bbyp: boost-bypass { |
| 638 |
regulator-name = "vph_pwr_bbyp"; |
| 639 |
regulator-min-microvolt = <3150000>; |
| 640 |
regulator-max-microvolt = <3600000>; |
| 641 |
}; |
| 642 |
}; |
| 643 |
}; |
| 644 |
|
| 645 |
&pm8994_spmi_regulators { |
| 646 |
qcom,saw-reg = <&saw3>; |
| 647 |
s8 { |
| 648 |
qcom,saw-slave; |
| 649 |
}; |
| 650 |
s9 { |
| 651 |
qcom,saw-slave; |
| 652 |
}; |
| 653 |
s10 { |
| 654 |
qcom,saw-slave; |
| 655 |
}; |
| 656 |
vreg_apc_0p8: s11 { |
| 657 |
qcom,saw-leader; |
| 658 |
regulator-name = "vreg_apc_0p8"; |
| 659 |
regulator-min-microvolt = <470000>; |
| 660 |
regulator-max-microvolt = <1140000>; |
| 661 |
regulator-max-step-microvolt = <150000>; |
| 662 |
regulator-always-on; |
| 663 |
}; |
| 664 |
}; |
| 665 |
|
| 666 |
&pmi8994_spmi_regulators { |
| 667 |
vdd_gfx: s2 { |
| 668 |
regulator-name = "vdd_gfx"; |
| 669 |
regulator-min-microvolt = <400000>; |
| 670 |
regulator-max-microvolt = <1015000>; |
| 671 |
regulator-enable-ramp-delay = <500>; |
| 672 |
}; |
| 673 |
}; |
| 674 |
|
| 675 |
&pm8994_gpios { |
| 676 |
irled_default: irled-default-state { |
| 677 |
pins = "gpio5"; |
| 678 |
function = PMIC_GPIO_FUNC_FUNC1; |
| 679 |
output-low; |
| 680 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; |
| 681 |
power-source = <PM8994_GPIO_S4>; |
| 682 |
bias-disable; |
| 683 |
}; |
| 684 |
|
| 685 |
wlan_en_default: wlan-en-state { |
| 686 |
pins = "gpio8"; |
| 687 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 688 |
output-low; |
| 689 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| 690 |
power-source = <PM8994_GPIO_S4>; |
| 691 |
bias-disable; |
| 692 |
}; |
| 693 |
|
| 694 |
rome_enable_default: rome-enable-state { |
| 695 |
pins = "gpio9"; |
| 696 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 697 |
output-high; |
| 698 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| 699 |
power-source = <PM8994_GPIO_VPH>; |
| 700 |
}; |
| 701 |
|
| 702 |
divclk1_default: divclk1-state { |
| 703 |
pins = "gpio15"; |
| 704 |
function = PMIC_GPIO_FUNC_FUNC1; |
| 705 |
bias-disable; |
| 706 |
power-source = <PM8994_GPIO_S4>; |
| 707 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| 708 |
}; |
| 709 |
|
| 710 |
divclk4_pin_a: divclk4-state { |
| 711 |
pins = "gpio18"; |
| 712 |
function = PMIC_GPIO_FUNC_FUNC2; |
| 713 |
bias-disable; |
| 714 |
power-source = <PM8994_GPIO_S4>; |
| 715 |
}; |
| 716 |
}; |
| 717 |
|
| 718 |
&tlmm { |
| 719 |
mdss_dsi_default: mdss-dsi-default-state { |
| 720 |
pins = "gpio8"; |
| 721 |
function = "gpio"; |
| 722 |
drive-strength = <8>; |
| 723 |
bias-disable; |
| 724 |
}; |
| 725 |
|
| 726 |
mdss_dsi_sleep: mdss-dsi-sleep-state { |
| 727 |
pins = "gpio8"; |
| 728 |
function = "gpio"; |
| 729 |
drive-strength = <2>; |
| 730 |
bias-pull-down; |
| 731 |
}; |
| 732 |
|
| 733 |
mdss_te_default: mdss-te-default-state { |
| 734 |
pins = "gpio10"; |
| 735 |
function = "mdp_vsync"; |
| 736 |
drive-strength = <2>; |
| 737 |
bias-pull-down; |
| 738 |
}; |
| 739 |
|
| 740 |
mdss_te_sleep: mdss-te-sleep-state { |
| 741 |
pins = "gpio10"; |
| 742 |
function = "mdp_vsync"; |
| 743 |
drive-strength = <2>; |
| 744 |
bias-pull-down; |
| 745 |
}; |
| 746 |
|
| 747 |
nfc_default: nfc-default-state { |
| 748 |
pins = "gpio12", "gpio21"; |
| 749 |
function = "gpio"; |
| 750 |
drive-strength = <16>; |
| 751 |
bias-pull-up; |
| 752 |
}; |
| 753 |
}; |