| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2021, AngeloGioacchino Del Regno |
| 4 |
* <[email protected]> |
| 5 |
* Copyright (c) 2021, Konrad Dybcio <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "msm8996.dtsi" |
| 9 |
#include "pm8994.dtsi" |
| 10 |
#include "pmi8994.dtsi" |
| 11 |
#include "pmi8996.dtsi" |
| 12 |
#include <dt-bindings/input/input.h> |
| 13 |
#include <dt-bindings/gpio/gpio.h> |
| 14 |
#include <dt-bindings/leds/common.h> |
| 15 |
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| 16 |
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> |
| 17 |
|
| 18 |
/delete-node/ &adsp_mem; |
| 19 |
/delete-node/ &slpi_mem; |
| 20 |
/delete-node/ &venus_mem; |
| 21 |
/delete-node/ &gpu_mem; |
| 22 |
|
| 23 |
/ { |
| 24 |
qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */ |
| 25 |
qcom,board-id = <8 0>; |
| 26 |
|
| 27 |
chosen { |
| 28 |
bootargs = "maxcpus=2"; |
| 29 |
}; |
| 30 |
|
| 31 |
reserved-memory { |
| 32 |
ramoops@a7f00000 { |
| 33 |
compatible = "ramoops"; |
| 34 |
reg = <0 0xa7f00000 0 0x100000>; |
| 35 |
record-size = <0x20000>; |
| 36 |
console-size = <0x40000>; |
| 37 |
ftrace-size = <0x20000>; |
| 38 |
pmsg-size = <0x20000>; |
| 39 |
ecc-size = <16>; |
| 40 |
}; |
| 41 |
|
| 42 |
adsp_mem: adsp@8ea00000 { |
| 43 |
reg = <0x0 0x8ea00000 0x0 0x1a00000>; |
| 44 |
no-map; |
| 45 |
}; |
| 46 |
|
| 47 |
gpu_mem: gpu@90400000 { |
| 48 |
compatible = "shared-dma-pool"; |
| 49 |
reg = <0x0 0x90400000 0x0 0x2000>; |
| 50 |
no-map; |
| 51 |
}; |
| 52 |
|
| 53 |
slpi_mem: memory@90500000 { |
| 54 |
reg = <0 0x90500000 0 0xa00000>; |
| 55 |
no-map; |
| 56 |
}; |
| 57 |
|
| 58 |
venus_mem: memory@90f00000 { |
| 59 |
reg = <0 0x90f00000 0 0x500000>; |
| 60 |
no-map; |
| 61 |
}; |
| 62 |
}; |
| 63 |
|
| 64 |
panel_tvdd: tvdd-regulator { |
| 65 |
compatible = "regulator-fixed"; |
| 66 |
regulator-name = "panel_tvdd"; |
| 67 |
gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; |
| 68 |
pinctrl-0 = <&tp_vddio_en>; |
| 69 |
pinctrl-names = "default"; |
| 70 |
}; |
| 71 |
|
| 72 |
usb3_id: usb3-id { |
| 73 |
compatible = "linux,extcon-usb-gpio"; |
| 74 |
id-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; |
| 75 |
pinctrl-names = "default"; |
| 76 |
pinctrl-0 = <&usb_detect>; |
| 77 |
}; |
| 78 |
|
| 79 |
vph_pwr: vph-pwr-regulator { |
| 80 |
compatible = "regulator-fixed"; |
| 81 |
regulator-min-microvolt = <3700000>; |
| 82 |
regulator-max-microvolt = <3700000>; |
| 83 |
regulator-name = "vph_pwr"; |
| 84 |
regulator-always-on; |
| 85 |
regulator-boot-on; |
| 86 |
}; |
| 87 |
|
| 88 |
wlan_en: wlan-en-1-8v { |
| 89 |
compatible = "regulator-fixed"; |
| 90 |
regulator-name = "wlan-en-regulator"; |
| 91 |
regulator-min-microvolt = <1800000>; |
| 92 |
regulator-max-microvolt = <1800000>; |
| 93 |
gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; |
| 94 |
pinctrl-names = "default"; |
| 95 |
pinctrl-0 = <&wl_reg_on>; |
| 96 |
|
| 97 |
/* WLAN card specific delay */ |
| 98 |
startup-delay-us = <70000>; |
| 99 |
enable-active-high; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
&blsp1_i2c3 { |
| 104 |
clock-frequency = <355000>; |
| 105 |
status = "okay"; |
| 106 |
|
| 107 |
tof_sensor: vl53l0x@29 { |
| 108 |
compatible = "st,vl53l0x"; |
| 109 |
reg = <0x29>; |
| 110 |
}; |
| 111 |
}; |
| 112 |
|
| 113 |
&blsp1_uart2 { |
| 114 |
status = "okay"; |
| 115 |
}; |
| 116 |
|
| 117 |
&blsp2_i2c5 { |
| 118 |
clock-frequency = <355000>; |
| 119 |
status = "okay"; |
| 120 |
|
| 121 |
/* FUSB301 USB-C controller */ |
| 122 |
}; |
| 123 |
|
| 124 |
&blsp2_i2c6 { |
| 125 |
clock-frequency = <355000>; |
| 126 |
status = "okay"; |
| 127 |
|
| 128 |
synaptics@2c { |
| 129 |
compatible = "syna,rmi4-i2c"; |
| 130 |
reg = <0x2c>; |
| 131 |
interrupt-parent = <&tlmm>; |
| 132 |
interrupts = <125 IRQ_TYPE_EDGE_FALLING>; |
| 133 |
vdd-supply = <&panel_tvdd>; |
| 134 |
|
| 135 |
syna,reset-delay-ms = <220>; |
| 136 |
syna,startup-delay-ms = <220>; |
| 137 |
#address-cells = <1>; |
| 138 |
#size-cells = <0>; |
| 139 |
|
| 140 |
rmi4-f01@1 { |
| 141 |
reg = <0x1>; |
| 142 |
syna,nosleep-mode = <1>; |
| 143 |
}; |
| 144 |
|
| 145 |
rmi4-f11@11 { |
| 146 |
reg = <0x11>; |
| 147 |
syna,sensor-type = <1>; |
| 148 |
}; |
| 149 |
}; |
| 150 |
}; |
| 151 |
|
| 152 |
&blsp2_uart2 { |
| 153 |
status = "okay"; |
| 154 |
}; |
| 155 |
|
| 156 |
&camera0_mclk { |
| 157 |
drive-strength = <2>; |
| 158 |
output-low; |
| 159 |
}; |
| 160 |
|
| 161 |
&camera0_pwdn { |
| 162 |
drive-strength = <2>; |
| 163 |
output-low; |
| 164 |
}; |
| 165 |
|
| 166 |
&camera0_rst { |
| 167 |
pins = "gpio30"; |
| 168 |
drive-strength = <2>; |
| 169 |
output-low; |
| 170 |
}; |
| 171 |
|
| 172 |
&camera2_mclk { |
| 173 |
drive-strength = <2>; |
| 174 |
output-low; |
| 175 |
}; |
| 176 |
|
| 177 |
&camera2_rst { |
| 178 |
drive-strength = <2>; |
| 179 |
output-low; |
| 180 |
}; |
| 181 |
|
| 182 |
&hsusb_phy1 { |
| 183 |
vdd-supply = <&pm8994_l28>; |
| 184 |
vdda-pll-supply = <&pm8994_l12>; |
| 185 |
vdda-phy-dpdm-supply = <&pm8994_l24>; |
| 186 |
status = "okay"; |
| 187 |
}; |
| 188 |
|
| 189 |
&mmcc { |
| 190 |
vdd-gfx-supply = <&vdd_gfx>; |
| 191 |
}; |
| 192 |
|
| 193 |
&pcie0 { |
| 194 |
perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; |
| 195 |
wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; |
| 196 |
vddpe-3v3-supply = <&wlan_en>; |
| 197 |
vdda-supply = <&pm8994_l28>; |
| 198 |
status = "okay"; |
| 199 |
}; |
| 200 |
|
| 201 |
&pcie_phy { |
| 202 |
vdda-phy-supply = <&pm8994_l28>; |
| 203 |
vdda-pll-supply = <&pm8994_l12>; |
| 204 |
status = "okay"; |
| 205 |
}; |
| 206 |
|
| 207 |
&pm8994_gpios { |
| 208 |
pinctrl-names = "default"; |
| 209 |
pinctrl-0 = <&pm8994_gpios_defaults>; |
| 210 |
gpio-line-names = |
| 211 |
"NC", |
| 212 |
"VOL_DOWN_N", |
| 213 |
"VOL_UP_N", |
| 214 |
"SNAPSHOT_N", |
| 215 |
"FOCUS_N", |
| 216 |
"NC", |
| 217 |
"NFC_VEN", |
| 218 |
"NC", |
| 219 |
"NC", |
| 220 |
"NC", |
| 221 |
"NC", |
| 222 |
"NC", |
| 223 |
"EAR_EN", |
| 224 |
"NC", |
| 225 |
"PM_DIVCLK1", |
| 226 |
"PMI_CLK", |
| 227 |
"NC", |
| 228 |
"WL_SLEEP_CLK", |
| 229 |
"NC", |
| 230 |
"PMIC_SPON", |
| 231 |
"UIM_BATT_ALARM", |
| 232 |
"PMK_SLEEP_CLK"; |
| 233 |
|
| 234 |
/* |
| 235 |
* We don't yet know for sure which GPIOs are of our interest, but what |
| 236 |
* we do know is that if a vendor sets the pins to a non-default state, there's |
| 237 |
* probably a reason for it, and just to be on the safe side, we follow suit. |
| 238 |
*/ |
| 239 |
pm8994_gpios_defaults: pm8994-gpios-default-state { |
| 240 |
pm8994-gpio1-nc-pins { |
| 241 |
pins = "gpio1"; |
| 242 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 243 |
drive-push-pull; |
| 244 |
bias-high-impedance; |
| 245 |
}; |
| 246 |
|
| 247 |
vol-down-n-pins { |
| 248 |
pins = "gpio2"; |
| 249 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 250 |
drive-push-pull; |
| 251 |
input-enable; |
| 252 |
bias-pull-up; |
| 253 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 254 |
power-source = <PM8994_GPIO_S4>; |
| 255 |
}; |
| 256 |
|
| 257 |
vol-up-n-pins { |
| 258 |
pins = "gpio3"; |
| 259 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 260 |
drive-push-pull; |
| 261 |
input-enable; |
| 262 |
bias-pull-up; |
| 263 |
power-source = <PM8994_GPIO_S4>; |
| 264 |
}; |
| 265 |
|
| 266 |
camera-snapshot-n-pins { |
| 267 |
pins = "gpio4"; |
| 268 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 269 |
drive-push-pull; |
| 270 |
input-enable; |
| 271 |
bias-pull-up; |
| 272 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 273 |
power-source = <PM8994_GPIO_S4>; |
| 274 |
}; |
| 275 |
|
| 276 |
camera-focus-n-pins { |
| 277 |
pins = "gpio5"; |
| 278 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 279 |
drive-push-pull; |
| 280 |
input-enable; |
| 281 |
bias-pull-up; |
| 282 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 283 |
power-source = <PM8994_GPIO_S4>; |
| 284 |
}; |
| 285 |
|
| 286 |
pm8994-gpio6-nc-pins { |
| 287 |
pins = "gpio6"; |
| 288 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 289 |
drive-push-pull; |
| 290 |
bias-high-impedance; |
| 291 |
power-source = <PM8994_GPIO_VPH>; |
| 292 |
}; |
| 293 |
|
| 294 |
nfc-download-pins { |
| 295 |
pins = "gpio7"; |
| 296 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 297 |
output-low; |
| 298 |
drive-push-pull; |
| 299 |
bias-disable; |
| 300 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| 301 |
power-source = <PM8994_GPIO_S4>; |
| 302 |
}; |
| 303 |
|
| 304 |
pm8994-gpio8-nc-pins { |
| 305 |
pins = "gpio8"; |
| 306 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 307 |
output-low; |
| 308 |
drive-push-pull; |
| 309 |
bias-high-impedance; |
| 310 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 311 |
power-source = <PM8994_GPIO_VPH>; |
| 312 |
}; |
| 313 |
|
| 314 |
pm8994-gpio9-nc-pins { |
| 315 |
pins = "gpio9"; |
| 316 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 317 |
output-high; |
| 318 |
drive-push-pull; |
| 319 |
bias-high-impedance; |
| 320 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| 321 |
power-source = <PM8994_GPIO_VPH>; |
| 322 |
}; |
| 323 |
|
| 324 |
nfc-clock-pins { |
| 325 |
pins = "gpio10"; |
| 326 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 327 |
input-enable; |
| 328 |
drive-push-pull; |
| 329 |
bias-pull-down; |
| 330 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 331 |
power-source = <PM8994_GPIO_S4>; |
| 332 |
}; |
| 333 |
|
| 334 |
pm8994-gpio11-nc-pins { |
| 335 |
pins = "gpio11"; |
| 336 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 337 |
drive-push-pull; |
| 338 |
bias-high-impedance; |
| 339 |
power-source = <PM8994_GPIO_VPH>; |
| 340 |
}; |
| 341 |
|
| 342 |
pm8994-gpio12-nc-pins { |
| 343 |
pins = "gpio12"; |
| 344 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 345 |
drive-push-pull; |
| 346 |
bias-high-impedance; |
| 347 |
power-source = <PM8994_GPIO_VPH>; |
| 348 |
}; |
| 349 |
|
| 350 |
ear-enable-pins { |
| 351 |
pins = "gpio13"; |
| 352 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 353 |
output-high; |
| 354 |
drive-push-pull; |
| 355 |
bias-disable; |
| 356 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| 357 |
power-source = <PM8994_GPIO_S4>; |
| 358 |
}; |
| 359 |
|
| 360 |
pm8994-gpio14-nc-pins { |
| 361 |
pins = "gpio14"; |
| 362 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 363 |
drive-push-pull; |
| 364 |
input-enable; |
| 365 |
bias-high-impedance; |
| 366 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| 367 |
power-source = <PM8994_GPIO_VPH>; |
| 368 |
}; |
| 369 |
|
| 370 |
pm-divclk1-gpio-pins { |
| 371 |
pins = "gpio15"; |
| 372 |
function = "func1"; |
| 373 |
output-high; |
| 374 |
drive-push-pull; |
| 375 |
bias-high-impedance; |
| 376 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| 377 |
power-source = <PM8994_GPIO_VPH>; |
| 378 |
}; |
| 379 |
|
| 380 |
pmi-clk-gpio-pins { |
| 381 |
pins = "gpio16"; |
| 382 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 383 |
drive-push-pull; |
| 384 |
}; |
| 385 |
|
| 386 |
pm8994-gpio17-nc-pins { |
| 387 |
pins = "gpio17"; |
| 388 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 389 |
drive-push-pull; |
| 390 |
bias-high-impedance; |
| 391 |
power-source = <PM8994_GPIO_VPH>; |
| 392 |
}; |
| 393 |
|
| 394 |
rome-sleep-pins { |
| 395 |
pins = "gpio18"; |
| 396 |
function = PMIC_GPIO_FUNC_FUNC2; |
| 397 |
output-low; |
| 398 |
drive-push-pull; |
| 399 |
bias-disable; |
| 400 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>; |
| 401 |
power-source = <PM8994_GPIO_S4>; |
| 402 |
}; |
| 403 |
|
| 404 |
pm8994-gpio19-nc-pins { |
| 405 |
pins = "gpio19"; |
| 406 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 407 |
output-low; |
| 408 |
drive-push-pull; |
| 409 |
bias-high-impedance; |
| 410 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 411 |
power-source = <PM8994_GPIO_VPH>; |
| 412 |
}; |
| 413 |
|
| 414 |
pm8994-gpio22-nc-pins { |
| 415 |
pins = "gpio22"; |
| 416 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 417 |
drive-push-pull; |
| 418 |
bias-high-impedance; |
| 419 |
power-source = <PM8994_GPIO_VPH>; |
| 420 |
}; |
| 421 |
}; |
| 422 |
}; |
| 423 |
|
| 424 |
&pm8994_mpps { |
| 425 |
pinctrl-names = "default"; |
| 426 |
pinctrl-0 = <&pm8994_mpps_defaults>; |
| 427 |
|
| 428 |
gpio-line-names = |
| 429 |
"SDC_UIM_VBIAS", |
| 430 |
"LCD_ID_ADC", |
| 431 |
"VREF_DACX", |
| 432 |
"NC", |
| 433 |
"FLASH_THERM", |
| 434 |
"NC", |
| 435 |
"NC", |
| 436 |
"RF_ID"; |
| 437 |
|
| 438 |
pm8994_mpps_defaults: pm8994-mpps-default-state { |
| 439 |
lcd-id_adc-mpp-pins { |
| 440 |
pins = "mpp2"; |
| 441 |
function = "analog"; |
| 442 |
input-enable; |
| 443 |
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>; |
| 444 |
}; |
| 445 |
|
| 446 |
pm-mpp4-nc-pins { |
| 447 |
pins = "mpp4"; |
| 448 |
function = "digital"; |
| 449 |
bias-high-impedance; |
| 450 |
power-source = <PM8994_GPIO_VPH>; |
| 451 |
}; |
| 452 |
|
| 453 |
flash-therm-mpp-pins { |
| 454 |
pins = "mpp5"; |
| 455 |
function = "analog"; |
| 456 |
input-enable; |
| 457 |
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>; |
| 458 |
}; |
| 459 |
|
| 460 |
mpp6-nc-pins { |
| 461 |
pins = "mpp6"; |
| 462 |
function = "digital"; |
| 463 |
bias-high-impedance; |
| 464 |
}; |
| 465 |
|
| 466 |
rf-id-mpp-pins { |
| 467 |
pins = "mpp8"; |
| 468 |
function = "analog"; |
| 469 |
input-enable; |
| 470 |
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH8>; |
| 471 |
}; |
| 472 |
}; |
| 473 |
}; |
| 474 |
|
| 475 |
&pm8994_resin { |
| 476 |
linux,code = <KEY_VOLUMEUP>; |
| 477 |
status = "okay"; |
| 478 |
}; |
| 479 |
|
| 480 |
&pmi8994_gpios { |
| 481 |
pinctrl-names = "default"; |
| 482 |
pinctrl-0 = <&pmi8994_gpios_defaults>; |
| 483 |
|
| 484 |
gpio-line-names = |
| 485 |
"VIB_LDO_EN", |
| 486 |
"NC", |
| 487 |
"NC", |
| 488 |
"NC", |
| 489 |
"NC", |
| 490 |
"NC", |
| 491 |
"NC", |
| 492 |
"NC", |
| 493 |
"USB_SWITCH_SEL", |
| 494 |
"NC"; |
| 495 |
|
| 496 |
pmi8994_gpios_defaults: pmi8994-gpios-default-state { |
| 497 |
vib-ldo-en-gpio-pins { |
| 498 |
pins = "gpio1"; |
| 499 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 500 |
drive-push-pull; |
| 501 |
output-low; |
| 502 |
bias-disable; |
| 503 |
power-source = <PM8994_GPIO_S4>; |
| 504 |
}; |
| 505 |
|
| 506 |
pmi-gpio2-nc-pins { |
| 507 |
pins = "gpio2"; |
| 508 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 509 |
drive-push-pull; |
| 510 |
input-enable; |
| 511 |
bias-high-impedance; |
| 512 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 513 |
power-source = <PM8994_GPIO_VPH>; |
| 514 |
}; |
| 515 |
|
| 516 |
pmi-gpio3-nc-pins { |
| 517 |
pins = "gpio3"; |
| 518 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 519 |
drive-push-pull; |
| 520 |
input-enable; |
| 521 |
bias-high-impedance; |
| 522 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 523 |
power-source = <PM8994_GPIO_VPH>; |
| 524 |
}; |
| 525 |
|
| 526 |
pmi-gpio4-nc-pins { |
| 527 |
pins = "gpio4"; |
| 528 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 529 |
drive-push-pull; |
| 530 |
output-high; |
| 531 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| 532 |
power-source = <PM8994_GPIO_S4>; |
| 533 |
}; |
| 534 |
|
| 535 |
pmi-gpio5-nc-pins { |
| 536 |
pins = "gpio5"; |
| 537 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 538 |
drive-push-pull; |
| 539 |
output-high; |
| 540 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 541 |
power-source = <PM8994_GPIO_S4>; |
| 542 |
}; |
| 543 |
|
| 544 |
pmi-gpio6-nc-pins { |
| 545 |
pins = "gpio6"; |
| 546 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 547 |
drive-push-pull; |
| 548 |
output-high; |
| 549 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| 550 |
power-source = <PM8994_GPIO_S4>; |
| 551 |
}; |
| 552 |
|
| 553 |
pmi-gpio7-nc-pins { |
| 554 |
pins = "gpio7"; |
| 555 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 556 |
drive-push-pull; |
| 557 |
output-high; |
| 558 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| 559 |
power-source = <PM8994_GPIO_S4>; |
| 560 |
}; |
| 561 |
|
| 562 |
pmi-gpio8-nc-pins { |
| 563 |
pins = "gpio8"; |
| 564 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 565 |
drive-push-pull; |
| 566 |
output-high; |
| 567 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| 568 |
power-source = <PM8994_GPIO_S4>; |
| 569 |
}; |
| 570 |
|
| 571 |
usb-switch-sel-pins { |
| 572 |
pins = "gpio9"; |
| 573 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 574 |
drive-push-pull; |
| 575 |
}; |
| 576 |
|
| 577 |
pmi-gpio10-nc-pins { |
| 578 |
pins = "gpio10"; |
| 579 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 580 |
output-low; |
| 581 |
drive-push-pull; |
| 582 |
bias-disable; |
| 583 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 584 |
power-source = <PM8994_GPIO_S4>; |
| 585 |
}; |
| 586 |
}; |
| 587 |
}; |
| 588 |
|
| 589 |
&pm8994_spmi_regulators { |
| 590 |
qcom,saw-reg = <&saw3>; |
| 591 |
|
| 592 |
pm8994_s9: s9 { |
| 593 |
qcom,saw-slave; |
| 594 |
}; |
| 595 |
|
| 596 |
pm8994_s10: s10 { |
| 597 |
qcom,saw-slave; |
| 598 |
}; |
| 599 |
|
| 600 |
pm8994_s11: s11 { |
| 601 |
qcom,saw-leader; |
| 602 |
regulator-name = "vdd_apcc"; |
| 603 |
regulator-always-on; |
| 604 |
regulator-min-microvolt = <470000>; |
| 605 |
regulator-max-microvolt = <1140000>; |
| 606 |
}; |
| 607 |
}; |
| 608 |
|
| 609 |
&pmi8994_lpg { |
| 610 |
qcom,power-source = <1>; |
| 611 |
status = "okay"; |
| 612 |
|
| 613 |
multi-led { |
| 614 |
color = <LED_COLOR_ID_RGB>; |
| 615 |
function = LED_FUNCTION_STATUS; |
| 616 |
|
| 617 |
#address-cells = <1>; |
| 618 |
#size-cells = <0>; |
| 619 |
|
| 620 |
led@1 { |
| 621 |
reg = <1>; |
| 622 |
color = <LED_COLOR_ID_BLUE>; |
| 623 |
}; |
| 624 |
|
| 625 |
led@2 { |
| 626 |
reg = <2>; |
| 627 |
color = <LED_COLOR_ID_GREEN>; |
| 628 |
}; |
| 629 |
|
| 630 |
led@3 { |
| 631 |
reg = <3>; |
| 632 |
color = <LED_COLOR_ID_RED>; |
| 633 |
}; |
| 634 |
}; |
| 635 |
}; |
| 636 |
|
| 637 |
&pmi8994_spmi_regulators { |
| 638 |
vdd_gfx: |
| 639 |
pmi8994_s2: s2 { |
| 640 |
/* Pinned to a high value for now to avoid random crashes. */ |
| 641 |
regulator-min-microvolt = <1015000>; |
| 642 |
regulator-max-microvolt = <1015000>; |
| 643 |
regulator-name = "vdd_gfx"; |
| 644 |
regulator-always-on; |
| 645 |
}; |
| 646 |
}; |
| 647 |
|
| 648 |
&pmi8994_wled { |
| 649 |
default-brightness = <512>; |
| 650 |
qcom,num-strings = <3>; |
| 651 |
status = "okay"; |
| 652 |
}; |
| 653 |
|
| 654 |
&rpm_requests { |
| 655 |
regulators-0 { |
| 656 |
compatible = "qcom,rpm-pm8994-regulators"; |
| 657 |
|
| 658 |
vdd_s1-supply = <&vph_pwr>; |
| 659 |
vdd_s2-supply = <&vph_pwr>; |
| 660 |
vdd_s3-supply = <&vph_pwr>; |
| 661 |
vdd_s4-supply = <&vph_pwr>; |
| 662 |
vdd_s5-supply = <&vph_pwr>; |
| 663 |
vdd_s6-supply = <&vph_pwr>; |
| 664 |
vdd_s7-supply = <&vph_pwr>; |
| 665 |
vdd_s8-supply = <&vph_pwr>; |
| 666 |
vdd_s9-supply = <&vph_pwr>; |
| 667 |
vdd_s10-supply = <&vph_pwr>; |
| 668 |
vdd_s11-supply = <&vph_pwr>; |
| 669 |
vdd_s12-supply = <&vph_pwr>; |
| 670 |
vdd_l1-supply = <&pm8994_s3>; |
| 671 |
vdd_l2_l26_l28-supply = <&pm8994_s3>; |
| 672 |
vdd_l3_l11-supply = <&pm8994_s3>; |
| 673 |
vdd_l4_l27_l31-supply = <&pm8994_s3>; |
| 674 |
vdd_l5_l7-supply = <&pm8994_s5>; |
| 675 |
vdd_l6_l12_l32-supply = <&pm8994_s5>; |
| 676 |
vdd_l8_l16_l30-supply = <&vph_pwr>; |
| 677 |
vdd_l14_l15-supply = <&pm8994_s5>; |
| 678 |
vdd_l20_l21-supply = <&pm8994_s5>; |
| 679 |
vdd_l25-supply = <&pm8994_s3>; |
| 680 |
vdd_lvs1_2-supply = <&pm8994_s4>; |
| 681 |
|
| 682 |
pm8994_s3: s3 { |
| 683 |
regulator-min-microvolt = <1300000>; |
| 684 |
regulator-max-microvolt = <1300000>; |
| 685 |
}; |
| 686 |
|
| 687 |
pm8994_s4: s4 { |
| 688 |
regulator-min-microvolt = <1800000>; |
| 689 |
regulator-max-microvolt = <1800000>; |
| 690 |
regulator-system-load = <325000>; |
| 691 |
regulator-always-on; |
| 692 |
}; |
| 693 |
|
| 694 |
pm8994_s5: s5 { |
| 695 |
regulator-min-microvolt = <2150000>; |
| 696 |
regulator-max-microvolt = <2150000>; |
| 697 |
}; |
| 698 |
|
| 699 |
pm8994_s7: s7 { |
| 700 |
regulator-min-microvolt = <800000>; |
| 701 |
regulator-max-microvolt = <800000>; |
| 702 |
}; |
| 703 |
|
| 704 |
pm8994_l1: l1 { |
| 705 |
regulator-min-microvolt = <1000000>; |
| 706 |
regulator-max-microvolt = <1000000>; |
| 707 |
}; |
| 708 |
|
| 709 |
pm8994_l2: l2 { |
| 710 |
regulator-min-microvolt = <1250000>; |
| 711 |
regulator-max-microvolt = <1250000>; |
| 712 |
}; |
| 713 |
|
| 714 |
pm8994_l3: l3 { |
| 715 |
regulator-min-microvolt = <1100000>; |
| 716 |
regulator-max-microvolt = <1100000>; |
| 717 |
}; |
| 718 |
|
| 719 |
pm8994_l4: l4 { |
| 720 |
regulator-min-microvolt = <1225000>; |
| 721 |
regulator-max-microvolt = <1225000>; |
| 722 |
}; |
| 723 |
|
| 724 |
/* L6 and L7 seem unused. */ |
| 725 |
|
| 726 |
pm8994_l8: l8 { |
| 727 |
regulator-min-microvolt = <1800000>; |
| 728 |
regulator-max-microvolt = <1800000>; |
| 729 |
}; |
| 730 |
|
| 731 |
pm8994_l9: l9 { |
| 732 |
regulator-min-microvolt = <1800000>; |
| 733 |
regulator-max-microvolt = <1800000>; |
| 734 |
}; |
| 735 |
|
| 736 |
pm8994_l10: l10 { |
| 737 |
regulator-min-microvolt = <1800000>; |
| 738 |
regulator-max-microvolt = <1800000>; |
| 739 |
}; |
| 740 |
|
| 741 |
pm8994_l11: l11 { |
| 742 |
regulator-min-microvolt = <1100000>; |
| 743 |
regulator-max-microvolt = <1100000>; |
| 744 |
}; |
| 745 |
|
| 746 |
pm8994_l12: l12 { |
| 747 |
regulator-min-microvolt = <1800000>; |
| 748 |
regulator-max-microvolt = <1800000>; |
| 749 |
regulator-allow-set-load; |
| 750 |
}; |
| 751 |
|
| 752 |
pm8994_l13: l13 { |
| 753 |
regulator-min-microvolt = <1800000>; |
| 754 |
regulator-max-microvolt = <2950000>; |
| 755 |
regulator-system-load = <22000>; |
| 756 |
regulator-allow-set-load; |
| 757 |
}; |
| 758 |
|
| 759 |
pm8994_l14: l14 { |
| 760 |
regulator-min-microvolt = <1700000>; |
| 761 |
regulator-max-microvolt = <1900000>; |
| 762 |
}; |
| 763 |
|
| 764 |
pm8994_l15: l15 { |
| 765 |
regulator-min-microvolt = <1800000>; |
| 766 |
regulator-max-microvolt = <1800000>; |
| 767 |
}; |
| 768 |
|
| 769 |
pm8994_l16: l16 { |
| 770 |
regulator-min-microvolt = <2700000>; |
| 771 |
regulator-max-microvolt = <2700000>; |
| 772 |
}; |
| 773 |
|
| 774 |
pm8994_l17: l17 { |
| 775 |
regulator-min-microvolt = <2200000>; |
| 776 |
regulator-max-microvolt = <2500000>; |
| 777 |
}; |
| 778 |
|
| 779 |
pm8994_l18: l18 { |
| 780 |
regulator-min-microvolt = <1800000>; |
| 781 |
regulator-max-microvolt = <1800000>; |
| 782 |
}; |
| 783 |
|
| 784 |
pm8994_l19: l19 { |
| 785 |
regulator-min-microvolt = <3000000>; |
| 786 |
regulator-max-microvolt = <3000000>; |
| 787 |
}; |
| 788 |
|
| 789 |
pm8994_l20: l20 { |
| 790 |
regulator-min-microvolt = <2950000>; |
| 791 |
regulator-max-microvolt = <2950000>; |
| 792 |
regulator-system-load = <570000>; |
| 793 |
regulator-allow-set-load; |
| 794 |
}; |
| 795 |
|
| 796 |
pm8994_l21: l21 { |
| 797 |
regulator-min-microvolt = <2950000>; |
| 798 |
regulator-max-microvolt = <2950000>; |
| 799 |
regulator-system-load = <800000>; |
| 800 |
regulator-allow-set-load; |
| 801 |
}; |
| 802 |
|
| 803 |
pm8994_l22: l22 { |
| 804 |
regulator-min-microvolt = <3000000>; |
| 805 |
regulator-max-microvolt = <3000000>; |
| 806 |
}; |
| 807 |
|
| 808 |
pm8994_l23: l23 { |
| 809 |
regulator-min-microvolt = <2700000>; |
| 810 |
regulator-max-microvolt = <2700000>; |
| 811 |
}; |
| 812 |
|
| 813 |
pm8994_l24: l24 { |
| 814 |
regulator-min-microvolt = <3075000>; |
| 815 |
regulator-max-microvolt = <3075000>; |
| 816 |
regulator-allow-set-load; |
| 817 |
}; |
| 818 |
|
| 819 |
pm8994_l25: l25 { |
| 820 |
regulator-min-microvolt = <1200000>; |
| 821 |
regulator-max-microvolt = <1200000>; |
| 822 |
regulator-allow-set-load; |
| 823 |
}; |
| 824 |
|
| 825 |
pm8994_l27: l27 { |
| 826 |
regulator-min-microvolt = <1000000>; |
| 827 |
regulator-max-microvolt = <1200000>; |
| 828 |
}; |
| 829 |
|
| 830 |
pm8994_l28: l28 { |
| 831 |
regulator-min-microvolt = <925000>; |
| 832 |
regulator-max-microvolt = <925000>; |
| 833 |
regulator-allow-set-load; |
| 834 |
}; |
| 835 |
|
| 836 |
pm8994_l29: l29 { |
| 837 |
regulator-min-microvolt = <2700000>; |
| 838 |
regulator-max-microvolt = <2700000>; |
| 839 |
}; |
| 840 |
|
| 841 |
pm8994_l30: l30 { }; |
| 842 |
|
| 843 |
pm8994_l32: l32 { |
| 844 |
regulator-min-microvolt = <1800000>; |
| 845 |
regulator-max-microvolt = <1800000>; |
| 846 |
}; |
| 847 |
}; |
| 848 |
}; |
| 849 |
|
| 850 |
&sdhc1 { |
| 851 |
vmmc-supply = <&pm8994_l20>; |
| 852 |
vqmmc-supply = <&pm8994_s4>; |
| 853 |
mmc-hs400-1_8v; |
| 854 |
mmc-hs200-1_8v; |
| 855 |
status = "okay"; |
| 856 |
}; |
| 857 |
|
| 858 |
&sdhc2 { |
| 859 |
cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; |
| 860 |
vmmc-supply = <&pm8994_l21>; |
| 861 |
vqmmc-supply = <&pm8994_l13>; |
| 862 |
status = "okay"; |
| 863 |
}; |
| 864 |
|
| 865 |
&tlmm { |
| 866 |
gpio-reserved-ranges = <0 4>; |
| 867 |
pinctrl-0 = <&sw_service_gpio>; |
| 868 |
pinctrl-names = "default"; |
| 869 |
|
| 870 |
disp_reset_n_gpio: disp-reset-n-state { |
| 871 |
pins = "gpio8"; |
| 872 |
function = "gpio"; |
| 873 |
drive-strength = <2>; |
| 874 |
bias-disable; |
| 875 |
}; |
| 876 |
|
| 877 |
mdp_vsync_p_gpio: mdp-vsync-p-state { |
| 878 |
pins = "gpio10"; |
| 879 |
function = "mdp_vsync"; |
| 880 |
drive-strength = <2>; |
| 881 |
bias-disable; |
| 882 |
}; |
| 883 |
|
| 884 |
sw_service_gpio: sw-service-gpio-state { |
| 885 |
pins = "gpio16"; |
| 886 |
function = "gpio"; |
| 887 |
drive-strength = <2>; |
| 888 |
bias-pull-up; |
| 889 |
}; |
| 890 |
|
| 891 |
usb_detect: usb-detect-state { |
| 892 |
pins = "gpio25"; |
| 893 |
function = "gpio"; |
| 894 |
drive-strength = <2>; |
| 895 |
bias-disable; |
| 896 |
output-high; |
| 897 |
}; |
| 898 |
|
| 899 |
uim_detect_en: uim-detect-en-state { |
| 900 |
pins = "gpio29"; |
| 901 |
function = "gpio"; |
| 902 |
drive-strength = <2>; |
| 903 |
bias-disable; |
| 904 |
output-high; |
| 905 |
}; |
| 906 |
|
| 907 |
tray_det_pin: tray-det-state { |
| 908 |
pins = "gpio40"; |
| 909 |
function = "gpio"; |
| 910 |
drive-strength = <2>; |
| 911 |
bias-disable; |
| 912 |
}; |
| 913 |
|
| 914 |
tp_vddio_en: tp-vddio-en-state { |
| 915 |
pins = "gpio50"; |
| 916 |
function = "gpio"; |
| 917 |
drive-strength = <2>; |
| 918 |
bias-disable; |
| 919 |
output-high; |
| 920 |
}; |
| 921 |
|
| 922 |
lcd_vddio_en: lcd-vddio-en-state { |
| 923 |
pins = "gpio51"; |
| 924 |
function = "gpio"; |
| 925 |
drive-strength = <2>; |
| 926 |
bias-disable; |
| 927 |
output-low; |
| 928 |
}; |
| 929 |
|
| 930 |
wl_host_wake: wl-host-wake-state { |
| 931 |
pins = "gpio79"; |
| 932 |
function = "gpio"; |
| 933 |
drive-strength = <2>; |
| 934 |
bias-pull-down; |
| 935 |
}; |
| 936 |
|
| 937 |
wl_reg_on: wl-reg-on-state { |
| 938 |
pins = "gpio84"; |
| 939 |
function = "gpio"; |
| 940 |
drive-strength = <2>; |
| 941 |
bias-disable; |
| 942 |
output-low; |
| 943 |
}; |
| 944 |
|
| 945 |
ts_reset_n: ts-rst-n-state { |
| 946 |
pins = "gpio89"; |
| 947 |
function = "gpio"; |
| 948 |
drive-strength = <2>; |
| 949 |
}; |
| 950 |
|
| 951 |
touch_int_n: touch-int-n-state { |
| 952 |
pins = "gpio125"; |
| 953 |
function = "gpio"; |
| 954 |
drive-strength = <2>; |
| 955 |
bias-pull-up; |
| 956 |
}; |
| 957 |
|
| 958 |
touch_int_sleep: touch-int-sleep-state { |
| 959 |
pins = "gpio125"; |
| 960 |
function = "gpio"; |
| 961 |
drive-strength = <2>; |
| 962 |
bias-pull-down; |
| 963 |
}; |
| 964 |
}; |
| 965 |
|
| 966 |
&usb3 { |
| 967 |
qcom,select-utmi-as-pipe-clk; |
| 968 |
status = "okay"; |
| 969 |
}; |
| 970 |
|
| 971 |
&usb3_dwc3 { |
| 972 |
extcon = <&usb3_id>; |
| 973 |
dr_mode = "peripheral"; |
| 974 |
maximum-speed = "high-speed"; |
| 975 |
phys = <&hsusb_phy1>; |
| 976 |
phy-names = "usb2-phy"; |
| 977 |
snps,hird-threshold = /bits/ 8 <0>; |
| 978 |
}; |