| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 7 |
#include <dt-bindings/clock/qcom,gcc-msm8994.h> |
| 8 |
#include <dt-bindings/clock/qcom,mmcc-msm8994.h> |
| 9 |
#include <dt-bindings/clock/qcom,rpmcc.h> |
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/power/qcom-rpmpd.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
interrupt-parent = <&intc>; |
| 15 |
|
| 16 |
#address-cells = <2>; |
| 17 |
#size-cells = <2>; |
| 18 |
|
| 19 |
aliases { |
| 20 |
mmc1 = &sdhc1; |
| 21 |
mmc2 = &sdhc2; |
| 22 |
}; |
| 23 |
|
| 24 |
chosen { }; |
| 25 |
|
| 26 |
clocks { |
| 27 |
xo_board: xo-board { |
| 28 |
compatible = "fixed-clock"; |
| 29 |
#clock-cells = <0>; |
| 30 |
clock-frequency = <19200000>; |
| 31 |
clock-output-names = "xo_board"; |
| 32 |
}; |
| 33 |
|
| 34 |
sleep_clk: sleep-clk { |
| 35 |
compatible = "fixed-clock"; |
| 36 |
#clock-cells = <0>; |
| 37 |
clock-frequency = <32764>; |
| 38 |
clock-output-names = "sleep_clk"; |
| 39 |
}; |
| 40 |
}; |
| 41 |
|
| 42 |
cpus { |
| 43 |
#address-cells = <2>; |
| 44 |
#size-cells = <0>; |
| 45 |
|
| 46 |
cpu0: cpu@0 { |
| 47 |
device_type = "cpu"; |
| 48 |
compatible = "arm,cortex-a53"; |
| 49 |
reg = <0x0 0x0>; |
| 50 |
enable-method = "psci"; |
| 51 |
next-level-cache = <&l2_0>; |
| 52 |
l2_0: l2-cache { |
| 53 |
compatible = "cache"; |
| 54 |
cache-level = <2>; |
| 55 |
cache-unified; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
cpu1: cpu@1 { |
| 60 |
device_type = "cpu"; |
| 61 |
compatible = "arm,cortex-a53"; |
| 62 |
reg = <0x0 0x1>; |
| 63 |
enable-method = "psci"; |
| 64 |
next-level-cache = <&l2_0>; |
| 65 |
}; |
| 66 |
|
| 67 |
cpu2: cpu@2 { |
| 68 |
device_type = "cpu"; |
| 69 |
compatible = "arm,cortex-a53"; |
| 70 |
reg = <0x0 0x2>; |
| 71 |
enable-method = "psci"; |
| 72 |
next-level-cache = <&l2_0>; |
| 73 |
}; |
| 74 |
|
| 75 |
cpu3: cpu@3 { |
| 76 |
device_type = "cpu"; |
| 77 |
compatible = "arm,cortex-a53"; |
| 78 |
reg = <0x0 0x3>; |
| 79 |
enable-method = "psci"; |
| 80 |
next-level-cache = <&l2_0>; |
| 81 |
}; |
| 82 |
|
| 83 |
cpu4: cpu@100 { |
| 84 |
device_type = "cpu"; |
| 85 |
compatible = "arm,cortex-a57"; |
| 86 |
reg = <0x0 0x100>; |
| 87 |
enable-method = "psci"; |
| 88 |
next-level-cache = <&l2_1>; |
| 89 |
l2_1: l2-cache { |
| 90 |
compatible = "cache"; |
| 91 |
cache-level = <2>; |
| 92 |
cache-unified; |
| 93 |
}; |
| 94 |
}; |
| 95 |
|
| 96 |
cpu5: cpu@101 { |
| 97 |
device_type = "cpu"; |
| 98 |
compatible = "arm,cortex-a57"; |
| 99 |
reg = <0x0 0x101>; |
| 100 |
enable-method = "psci"; |
| 101 |
next-level-cache = <&l2_1>; |
| 102 |
}; |
| 103 |
|
| 104 |
cpu6: cpu@102 { |
| 105 |
device_type = "cpu"; |
| 106 |
compatible = "arm,cortex-a57"; |
| 107 |
reg = <0x0 0x102>; |
| 108 |
enable-method = "psci"; |
| 109 |
next-level-cache = <&l2_1>; |
| 110 |
}; |
| 111 |
|
| 112 |
cpu7: cpu@103 { |
| 113 |
device_type = "cpu"; |
| 114 |
compatible = "arm,cortex-a57"; |
| 115 |
reg = <0x0 0x103>; |
| 116 |
enable-method = "psci"; |
| 117 |
next-level-cache = <&l2_1>; |
| 118 |
}; |
| 119 |
|
| 120 |
cpu-map { |
| 121 |
cluster0 { |
| 122 |
core0 { |
| 123 |
cpu = <&cpu0>; |
| 124 |
}; |
| 125 |
|
| 126 |
core1 { |
| 127 |
cpu = <&cpu1>; |
| 128 |
}; |
| 129 |
|
| 130 |
core2 { |
| 131 |
cpu = <&cpu2>; |
| 132 |
}; |
| 133 |
|
| 134 |
core3 { |
| 135 |
cpu = <&cpu3>; |
| 136 |
}; |
| 137 |
}; |
| 138 |
|
| 139 |
cluster1 { |
| 140 |
core0 { |
| 141 |
cpu = <&cpu4>; |
| 142 |
}; |
| 143 |
|
| 144 |
core1 { |
| 145 |
cpu = <&cpu5>; |
| 146 |
}; |
| 147 |
|
| 148 |
cpu6_map: core2 { |
| 149 |
cpu = <&cpu6>; |
| 150 |
}; |
| 151 |
|
| 152 |
cpu7_map: core3 { |
| 153 |
cpu = <&cpu7>; |
| 154 |
}; |
| 155 |
}; |
| 156 |
}; |
| 157 |
}; |
| 158 |
|
| 159 |
firmware { |
| 160 |
scm { |
| 161 |
compatible = "qcom,scm-msm8994", "qcom,scm"; |
| 162 |
}; |
| 163 |
}; |
| 164 |
|
| 165 |
memory@80000000 { |
| 166 |
device_type = "memory"; |
| 167 |
/* We expect the bootloader to fill in the reg */ |
| 168 |
reg = <0 0x80000000 0 0>; |
| 169 |
}; |
| 170 |
|
| 171 |
pmu { |
| 172 |
compatible = "arm,cortex-a53-pmu"; |
| 173 |
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>; |
| 174 |
}; |
| 175 |
|
| 176 |
psci { |
| 177 |
compatible = "arm,psci-0.2"; |
| 178 |
method = "hvc"; |
| 179 |
}; |
| 180 |
|
| 181 |
rpm: remoteproc { |
| 182 |
compatible = "qcom,msm8994-rpm-proc", "qcom,rpm-proc"; |
| 183 |
|
| 184 |
smd-edge { |
| 185 |
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; |
| 186 |
mboxes = <&apcs 0>; |
| 187 |
qcom,smd-edge = <15>; |
| 188 |
qcom,remote-pid = <6>; |
| 189 |
|
| 190 |
rpm_requests: rpm-requests { |
| 191 |
compatible = "qcom,rpm-msm8994", "qcom,smd-rpm"; |
| 192 |
qcom,smd-channels = "rpm_requests"; |
| 193 |
|
| 194 |
rpmcc: clock-controller { |
| 195 |
compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc"; |
| 196 |
#clock-cells = <1>; |
| 197 |
}; |
| 198 |
|
| 199 |
rpmpd: power-controller { |
| 200 |
compatible = "qcom,msm8994-rpmpd"; |
| 201 |
#power-domain-cells = <1>; |
| 202 |
operating-points-v2 = <&rpmpd_opp_table>; |
| 203 |
|
| 204 |
rpmpd_opp_table: opp-table { |
| 205 |
compatible = "operating-points-v2"; |
| 206 |
|
| 207 |
rpmpd_opp_ret: opp1 { |
| 208 |
opp-level = <1>; |
| 209 |
}; |
| 210 |
rpmpd_opp_svs_krait: opp2 { |
| 211 |
opp-level = <2>; |
| 212 |
}; |
| 213 |
rpmpd_opp_svs_soc: opp3 { |
| 214 |
opp-level = <3>; |
| 215 |
}; |
| 216 |
rpmpd_opp_nom: opp4 { |
| 217 |
opp-level = <4>; |
| 218 |
}; |
| 219 |
rpmpd_opp_turbo: opp5 { |
| 220 |
opp-level = <5>; |
| 221 |
}; |
| 222 |
rpmpd_opp_super_turbo: opp6 { |
| 223 |
opp-level = <6>; |
| 224 |
}; |
| 225 |
}; |
| 226 |
}; |
| 227 |
}; |
| 228 |
}; |
| 229 |
}; |
| 230 |
|
| 231 |
reserved-memory { |
| 232 |
#address-cells = <2>; |
| 233 |
#size-cells = <2>; |
| 234 |
ranges; |
| 235 |
|
| 236 |
dfps_data_mem: dfps-data@3400000 { |
| 237 |
reg = <0 0x03400000 0 0x1000>; |
| 238 |
no-map; |
| 239 |
}; |
| 240 |
|
| 241 |
cont_splash_mem: memory@3401000 { |
| 242 |
reg = <0 0x03401000 0 0x2200000>; |
| 243 |
no-map; |
| 244 |
}; |
| 245 |
|
| 246 |
smem_mem: smem@6a00000 { |
| 247 |
reg = <0 0x06a00000 0 0x200000>; |
| 248 |
no-map; |
| 249 |
}; |
| 250 |
|
| 251 |
mpss_mem: memory@7000000 { |
| 252 |
reg = <0 0x07000000 0 0x5a00000>; |
| 253 |
no-map; |
| 254 |
}; |
| 255 |
|
| 256 |
peripheral_region: memory@ca00000 { |
| 257 |
reg = <0 0x0ca00000 0 0x1f00000>; |
| 258 |
no-map; |
| 259 |
}; |
| 260 |
|
| 261 |
rmtfs_mem: memory@c6400000 { |
| 262 |
compatible = "qcom,rmtfs-mem"; |
| 263 |
reg = <0 0xc6400000 0 0x180000>; |
| 264 |
no-map; |
| 265 |
|
| 266 |
qcom,client-id = <1>; |
| 267 |
}; |
| 268 |
|
| 269 |
mba_mem: memory@c6700000 { |
| 270 |
reg = <0 0xc6700000 0 0x100000>; |
| 271 |
no-map; |
| 272 |
}; |
| 273 |
|
| 274 |
audio_mem: memory@c7000000 { |
| 275 |
reg = <0 0xc7000000 0 0x800000>; |
| 276 |
no-map; |
| 277 |
}; |
| 278 |
|
| 279 |
adsp_mem: memory@c9400000 { |
| 280 |
reg = <0 0xc9400000 0 0x3f00000>; |
| 281 |
no-map; |
| 282 |
}; |
| 283 |
|
| 284 |
res_hyp_mem: reserved@6c00000 { |
| 285 |
reg = <0 0x06c00000 0 0x400000>; |
| 286 |
no-map; |
| 287 |
}; |
| 288 |
}; |
| 289 |
|
| 290 |
smem { |
| 291 |
compatible = "qcom,smem"; |
| 292 |
memory-region = <&smem_mem>; |
| 293 |
qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| 294 |
hwlocks = <&tcsr_mutex 3>; |
| 295 |
}; |
| 296 |
|
| 297 |
smp2p-lpass { |
| 298 |
compatible = "qcom,smp2p"; |
| 299 |
qcom,smem = <443>, <429>; |
| 300 |
|
| 301 |
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; |
| 302 |
|
| 303 |
mboxes = <&apcs 10>; |
| 304 |
|
| 305 |
qcom,local-pid = <0>; |
| 306 |
qcom,remote-pid = <2>; |
| 307 |
|
| 308 |
adsp_smp2p_out: master-kernel { |
| 309 |
qcom,entry-name = "master-kernel"; |
| 310 |
#qcom,smem-state-cells = <1>; |
| 311 |
}; |
| 312 |
|
| 313 |
adsp_smp2p_in: slave-kernel { |
| 314 |
qcom,entry-name = "slave-kernel"; |
| 315 |
|
| 316 |
interrupt-controller; |
| 317 |
#interrupt-cells = <2>; |
| 318 |
}; |
| 319 |
}; |
| 320 |
|
| 321 |
smp2p-modem { |
| 322 |
compatible = "qcom,smp2p"; |
| 323 |
qcom,smem = <435>, <428>; |
| 324 |
|
| 325 |
interrupt-parent = <&intc>; |
| 326 |
interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; |
| 327 |
|
| 328 |
mboxes = <&apcs 14>; |
| 329 |
|
| 330 |
qcom,local-pid = <0>; |
| 331 |
qcom,remote-pid = <1>; |
| 332 |
|
| 333 |
modem_smp2p_out: master-kernel { |
| 334 |
qcom,entry-name = "master-kernel"; |
| 335 |
#qcom,smem-state-cells = <1>; |
| 336 |
}; |
| 337 |
|
| 338 |
modem_smp2p_in: slave-kernel { |
| 339 |
qcom,entry-name = "slave-kernel"; |
| 340 |
|
| 341 |
interrupt-controller; |
| 342 |
#interrupt-cells = <2>; |
| 343 |
}; |
| 344 |
}; |
| 345 |
|
| 346 |
soc: soc@0 { |
| 347 |
#address-cells = <1>; |
| 348 |
#size-cells = <1>; |
| 349 |
ranges = <0 0 0 0xffffffff>; |
| 350 |
compatible = "simple-bus"; |
| 351 |
|
| 352 |
intc: interrupt-controller@f9000000 { |
| 353 |
compatible = "qcom,msm-qgic2"; |
| 354 |
interrupt-controller; |
| 355 |
#interrupt-cells = <3>; |
| 356 |
reg = <0xf9000000 0x1000>, |
| 357 |
<0xf9002000 0x1000>; |
| 358 |
}; |
| 359 |
|
| 360 |
apcs: mailbox@f900d000 { |
| 361 |
compatible = "qcom,msm8994-apcs-kpss-global", "syscon"; |
| 362 |
reg = <0xf900d000 0x2000>; |
| 363 |
#mbox-cells = <1>; |
| 364 |
}; |
| 365 |
|
| 366 |
watchdog@f9017000 { |
| 367 |
compatible = "qcom,apss-wdt-msm8994", "qcom,kpss-wdt"; |
| 368 |
reg = <0xf9017000 0x1000>; |
| 369 |
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, |
| 370 |
<GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; |
| 371 |
clocks = <&sleep_clk>; |
| 372 |
timeout-sec = <10>; |
| 373 |
}; |
| 374 |
|
| 375 |
timer@f9020000 { |
| 376 |
#address-cells = <1>; |
| 377 |
#size-cells = <1>; |
| 378 |
ranges; |
| 379 |
compatible = "arm,armv7-timer-mem"; |
| 380 |
reg = <0xf9020000 0x1000>; |
| 381 |
|
| 382 |
frame@f9021000 { |
| 383 |
frame-number = <0>; |
| 384 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| 385 |
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| 386 |
reg = <0xf9021000 0x1000>, |
| 387 |
<0xf9022000 0x1000>; |
| 388 |
}; |
| 389 |
|
| 390 |
frame@f9023000 { |
| 391 |
frame-number = <1>; |
| 392 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 393 |
reg = <0xf9023000 0x1000>; |
| 394 |
status = "disabled"; |
| 395 |
}; |
| 396 |
|
| 397 |
frame@f9024000 { |
| 398 |
frame-number = <2>; |
| 399 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 400 |
reg = <0xf9024000 0x1000>; |
| 401 |
status = "disabled"; |
| 402 |
}; |
| 403 |
|
| 404 |
frame@f9025000 { |
| 405 |
frame-number = <3>; |
| 406 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 407 |
reg = <0xf9025000 0x1000>; |
| 408 |
status = "disabled"; |
| 409 |
}; |
| 410 |
|
| 411 |
frame@f9026000 { |
| 412 |
frame-number = <4>; |
| 413 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 414 |
reg = <0xf9026000 0x1000>; |
| 415 |
status = "disabled"; |
| 416 |
}; |
| 417 |
|
| 418 |
frame@f9027000 { |
| 419 |
frame-number = <5>; |
| 420 |
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 421 |
reg = <0xf9027000 0x1000>; |
| 422 |
status = "disabled"; |
| 423 |
}; |
| 424 |
|
| 425 |
frame@f9028000 { |
| 426 |
frame-number = <6>; |
| 427 |
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| 428 |
reg = <0xf9028000 0x1000>; |
| 429 |
status = "disabled"; |
| 430 |
}; |
| 431 |
}; |
| 432 |
|
| 433 |
usb3: usb@f92f8800 { |
| 434 |
compatible = "qcom,msm8994-dwc3", "qcom,dwc3"; |
| 435 |
reg = <0xf92f8800 0x400>; |
| 436 |
#address-cells = <1>; |
| 437 |
#size-cells = <1>; |
| 438 |
ranges; |
| 439 |
|
| 440 |
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, |
| 441 |
<GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, |
| 442 |
<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, |
| 443 |
<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>; |
| 444 |
interrupt-names = "pwr_event", |
| 445 |
"qusb2_phy", |
| 446 |
"hs_phy_irq", |
| 447 |
"ss_phy_irq"; |
| 448 |
|
| 449 |
clocks = <&gcc GCC_USB30_MASTER_CLK>, |
| 450 |
<&gcc GCC_SYS_NOC_USB3_AXI_CLK>, |
| 451 |
<&gcc GCC_USB30_SLEEP_CLK>, |
| 452 |
<&gcc GCC_USB30_MOCK_UTMI_CLK>; |
| 453 |
clock-names = "core", |
| 454 |
"iface", |
| 455 |
"sleep", |
| 456 |
"mock_utmi"; |
| 457 |
|
| 458 |
assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, |
| 459 |
<&gcc GCC_USB30_MASTER_CLK>; |
| 460 |
assigned-clock-rates = <19200000>, <120000000>; |
| 461 |
|
| 462 |
power-domains = <&gcc USB30_GDSC>; |
| 463 |
qcom,select-utmi-as-pipe-clk; |
| 464 |
|
| 465 |
usb@f9200000 { |
| 466 |
compatible = "snps,dwc3"; |
| 467 |
reg = <0xf9200000 0xcc00>; |
| 468 |
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; |
| 469 |
snps,dis_u2_susphy_quirk; |
| 470 |
snps,dis_enblslpm_quirk; |
| 471 |
maximum-speed = "high-speed"; |
| 472 |
dr_mode = "peripheral"; |
| 473 |
}; |
| 474 |
}; |
| 475 |
|
| 476 |
sdhc1: mmc@f9824900 { |
| 477 |
compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; |
| 478 |
reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; |
| 479 |
reg-names = "hc", "core"; |
| 480 |
|
| 481 |
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| 482 |
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| 483 |
interrupt-names = "hc_irq", "pwr_irq"; |
| 484 |
|
| 485 |
clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| 486 |
<&gcc GCC_SDCC1_APPS_CLK>, |
| 487 |
<&xo_board>; |
| 488 |
clock-names = "iface", "core", "xo"; |
| 489 |
|
| 490 |
pinctrl-names = "default", "sleep"; |
| 491 |
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; |
| 492 |
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; |
| 493 |
|
| 494 |
bus-width = <8>; |
| 495 |
non-removable; |
| 496 |
status = "disabled"; |
| 497 |
}; |
| 498 |
|
| 499 |
sdhc2: mmc@f98a4900 { |
| 500 |
compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; |
| 501 |
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; |
| 502 |
reg-names = "hc", "core"; |
| 503 |
|
| 504 |
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| 505 |
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; |
| 506 |
interrupt-names = "hc_irq", "pwr_irq"; |
| 507 |
|
| 508 |
clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| 509 |
<&gcc GCC_SDCC2_APPS_CLK>, |
| 510 |
<&xo_board>; |
| 511 |
clock-names = "iface", "core", "xo"; |
| 512 |
|
| 513 |
pinctrl-names = "default", "sleep"; |
| 514 |
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; |
| 515 |
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; |
| 516 |
|
| 517 |
cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; |
| 518 |
bus-width = <4>; |
| 519 |
status = "disabled"; |
| 520 |
}; |
| 521 |
|
| 522 |
blsp1_dma: dma-controller@f9904000 { |
| 523 |
compatible = "qcom,bam-v1.7.0"; |
| 524 |
reg = <0xf9904000 0x19000>; |
| 525 |
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; |
| 526 |
clocks = <&gcc GCC_BLSP1_AHB_CLK>; |
| 527 |
clock-names = "bam_clk"; |
| 528 |
#dma-cells = <1>; |
| 529 |
qcom,ee = <0>; |
| 530 |
qcom,controlled-remotely; |
| 531 |
num-channels = <24>; |
| 532 |
qcom,num-ees = <4>; |
| 533 |
}; |
| 534 |
|
| 535 |
blsp1_uart2: serial@f991e000 { |
| 536 |
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| 537 |
reg = <0xf991e000 0x1000>; |
| 538 |
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| 539 |
clock-names = "core", "iface"; |
| 540 |
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, |
| 541 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 542 |
pinctrl-names = "default", "sleep"; |
| 543 |
pinctrl-0 = <&blsp1_uart2_default>; |
| 544 |
pinctrl-1 = <&blsp1_uart2_sleep>; |
| 545 |
status = "disabled"; |
| 546 |
}; |
| 547 |
|
| 548 |
blsp1_i2c1: i2c@f9923000 { |
| 549 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 550 |
reg = <0xf9923000 0x500>; |
| 551 |
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| 552 |
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, |
| 553 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 554 |
clock-names = "core", "iface"; |
| 555 |
clock-frequency = <400000>; |
| 556 |
dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; |
| 557 |
dma-names = "tx", "rx"; |
| 558 |
pinctrl-names = "default", "sleep"; |
| 559 |
pinctrl-0 = <&i2c1_default>; |
| 560 |
pinctrl-1 = <&i2c1_sleep>; |
| 561 |
#address-cells = <1>; |
| 562 |
#size-cells = <0>; |
| 563 |
status = "disabled"; |
| 564 |
}; |
| 565 |
|
| 566 |
blsp1_spi1: spi@f9923000 { |
| 567 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 568 |
reg = <0xf9923000 0x500>; |
| 569 |
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| 570 |
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, |
| 571 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 572 |
clock-names = "core", "iface"; |
| 573 |
dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; |
| 574 |
dma-names = "tx", "rx"; |
| 575 |
pinctrl-names = "default", "sleep"; |
| 576 |
pinctrl-0 = <&blsp1_spi1_default>; |
| 577 |
pinctrl-1 = <&blsp1_spi1_sleep>; |
| 578 |
#address-cells = <1>; |
| 579 |
#size-cells = <0>; |
| 580 |
status = "disabled"; |
| 581 |
}; |
| 582 |
|
| 583 |
blsp1_i2c2: i2c@f9924000 { |
| 584 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 585 |
reg = <0xf9924000 0x500>; |
| 586 |
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 587 |
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, |
| 588 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 589 |
clock-names = "core", "iface"; |
| 590 |
clock-frequency = <400000>; |
| 591 |
dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; |
| 592 |
dma-names = "tx", "rx"; |
| 593 |
pinctrl-names = "default", "sleep"; |
| 594 |
pinctrl-0 = <&i2c2_default>; |
| 595 |
pinctrl-1 = <&i2c2_sleep>; |
| 596 |
#address-cells = <1>; |
| 597 |
#size-cells = <0>; |
| 598 |
status = "disabled"; |
| 599 |
}; |
| 600 |
|
| 601 |
/* I2C3 doesn't exist */ |
| 602 |
|
| 603 |
blsp1_i2c4: i2c@f9926000 { |
| 604 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 605 |
reg = <0xf9926000 0x500>; |
| 606 |
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| 607 |
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, |
| 608 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 609 |
clock-names = "core", "iface"; |
| 610 |
clock-frequency = <400000>; |
| 611 |
dmas = <&blsp1_dma 18>, <&blsp1_dma 19>; |
| 612 |
dma-names = "tx", "rx"; |
| 613 |
pinctrl-names = "default", "sleep"; |
| 614 |
pinctrl-0 = <&i2c4_default>; |
| 615 |
pinctrl-1 = <&i2c4_sleep>; |
| 616 |
#address-cells = <1>; |
| 617 |
#size-cells = <0>; |
| 618 |
status = "disabled"; |
| 619 |
}; |
| 620 |
|
| 621 |
blsp1_i2c5: i2c@f9927000 { |
| 622 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 623 |
reg = <0xf9927000 0x500>; |
| 624 |
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| 625 |
clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, |
| 626 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 627 |
clock-names = "core", "iface"; |
| 628 |
clock-frequency = <400000>; |
| 629 |
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; |
| 630 |
dma-names = "tx", "rx"; |
| 631 |
pinctrl-names = "default", "sleep"; |
| 632 |
pinctrl-0 = <&i2c5_default>; |
| 633 |
pinctrl-1 = <&i2c5_sleep>; |
| 634 |
#address-cells = <1>; |
| 635 |
#size-cells = <0>; |
| 636 |
status = "disabled"; |
| 637 |
}; |
| 638 |
|
| 639 |
blsp1_i2c6: i2c@f9928000 { |
| 640 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 641 |
reg = <0xf9928000 0x500>; |
| 642 |
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| 643 |
clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, |
| 644 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 645 |
clock-names = "core", "iface"; |
| 646 |
clock-frequency = <400000>; |
| 647 |
dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; |
| 648 |
dma-names = "tx", "rx"; |
| 649 |
pinctrl-names = "default", "sleep"; |
| 650 |
pinctrl-0 = <&i2c6_default>; |
| 651 |
pinctrl-1 = <&i2c6_sleep>; |
| 652 |
#address-cells = <1>; |
| 653 |
#size-cells = <0>; |
| 654 |
status = "disabled"; |
| 655 |
}; |
| 656 |
|
| 657 |
blsp2_dma: dma-controller@f9944000 { |
| 658 |
compatible = "qcom,bam-v1.7.0"; |
| 659 |
reg = <0xf9944000 0x19000>; |
| 660 |
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; |
| 661 |
clocks = <&gcc GCC_BLSP2_AHB_CLK>; |
| 662 |
clock-names = "bam_clk"; |
| 663 |
#dma-cells = <1>; |
| 664 |
qcom,ee = <0>; |
| 665 |
qcom,controlled-remotely; |
| 666 |
num-channels = <24>; |
| 667 |
qcom,num-ees = <4>; |
| 668 |
}; |
| 669 |
|
| 670 |
blsp2_uart2: serial@f995e000 { |
| 671 |
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| 672 |
reg = <0xf995e000 0x1000>; |
| 673 |
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| 674 |
clock-names = "core", "iface"; |
| 675 |
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, |
| 676 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 677 |
dmas = <&blsp2_dma 2>, <&blsp2_dma 3>; |
| 678 |
dma-names = "tx", "rx"; |
| 679 |
pinctrl-names = "default", "sleep"; |
| 680 |
pinctrl-0 = <&blsp2_uart2_default>; |
| 681 |
pinctrl-1 = <&blsp2_uart2_sleep>; |
| 682 |
status = "disabled"; |
| 683 |
}; |
| 684 |
|
| 685 |
blsp2_i2c1: i2c@f9963000 { |
| 686 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 687 |
reg = <0xf9963000 0x500>; |
| 688 |
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| 689 |
clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, |
| 690 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 691 |
clock-names = "core", "iface"; |
| 692 |
clock-frequency = <400000>; |
| 693 |
dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; |
| 694 |
dma-names = "tx", "rx"; |
| 695 |
pinctrl-names = "default", "sleep"; |
| 696 |
pinctrl-0 = <&i2c7_default>; |
| 697 |
pinctrl-1 = <&i2c7_sleep>; |
| 698 |
#address-cells = <1>; |
| 699 |
#size-cells = <0>; |
| 700 |
status = "disabled"; |
| 701 |
}; |
| 702 |
|
| 703 |
blsp2_spi4: spi@f9966000 { |
| 704 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 705 |
reg = <0xf9966000 0x500>; |
| 706 |
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |
| 707 |
clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>, |
| 708 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 709 |
clock-names = "core", "iface"; |
| 710 |
dmas = <&blsp2_dma 18>, <&blsp2_dma 19>; |
| 711 |
dma-names = "tx", "rx"; |
| 712 |
pinctrl-names = "default", "sleep"; |
| 713 |
pinctrl-0 = <&blsp2_spi10_default>; |
| 714 |
pinctrl-1 = <&blsp2_spi10_sleep>; |
| 715 |
#address-cells = <1>; |
| 716 |
#size-cells = <0>; |
| 717 |
status = "disabled"; |
| 718 |
}; |
| 719 |
|
| 720 |
blsp2_i2c5: i2c@f9967000 { |
| 721 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 722 |
reg = <0xf9967000 0x500>; |
| 723 |
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| 724 |
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, |
| 725 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 726 |
clock-names = "core", "iface"; |
| 727 |
clock-frequency = <355000>; |
| 728 |
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; |
| 729 |
dma-names = "tx", "rx"; |
| 730 |
pinctrl-names = "default", "sleep"; |
| 731 |
pinctrl-0 = <&i2c11_default>; |
| 732 |
pinctrl-1 = <&i2c11_sleep>; |
| 733 |
#address-cells = <1>; |
| 734 |
#size-cells = <0>; |
| 735 |
status = "disabled"; |
| 736 |
}; |
| 737 |
|
| 738 |
gcc: clock-controller@fc400000 { |
| 739 |
compatible = "qcom,gcc-msm8994"; |
| 740 |
#clock-cells = <1>; |
| 741 |
#reset-cells = <1>; |
| 742 |
#power-domain-cells = <1>; |
| 743 |
reg = <0xfc400000 0x2000>; |
| 744 |
|
| 745 |
clock-names = "xo", "sleep"; |
| 746 |
clocks = <&xo_board>, <&sleep_clk>; |
| 747 |
}; |
| 748 |
|
| 749 |
rpm_msg_ram: sram@fc428000 { |
| 750 |
compatible = "qcom,rpm-msg-ram"; |
| 751 |
reg = <0xfc428000 0x4000>; |
| 752 |
}; |
| 753 |
|
| 754 |
restart@fc4ab000 { |
| 755 |
compatible = "qcom,pshold"; |
| 756 |
reg = <0xfc4ab000 0x4>; |
| 757 |
}; |
| 758 |
|
| 759 |
spmi_bus: spmi@fc4cf000 { |
| 760 |
compatible = "qcom,spmi-pmic-arb"; |
| 761 |
reg = <0xfc4cf000 0x1000>, |
| 762 |
<0xfc4cb000 0x1000>, |
| 763 |
<0xfc4ca000 0x1000>; |
| 764 |
reg-names = "core", "intr", "cnfg"; |
| 765 |
interrupt-names = "periph_irq"; |
| 766 |
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; |
| 767 |
qcom,ee = <0>; |
| 768 |
qcom,channel = <0>; |
| 769 |
#address-cells = <2>; |
| 770 |
#size-cells = <0>; |
| 771 |
interrupt-controller; |
| 772 |
#interrupt-cells = <4>; |
| 773 |
}; |
| 774 |
|
| 775 |
tcsr_mutex: hwlock@fd484000 { |
| 776 |
compatible = "qcom,msm8994-tcsr-mutex", "qcom,tcsr-mutex"; |
| 777 |
reg = <0xfd484000 0x1000>; |
| 778 |
#hwlock-cells = <1>; |
| 779 |
}; |
| 780 |
|
| 781 |
tlmm: pinctrl@fd510000 { |
| 782 |
compatible = "qcom,msm8994-pinctrl"; |
| 783 |
reg = <0xfd510000 0x4000>; |
| 784 |
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| 785 |
gpio-controller; |
| 786 |
gpio-ranges = <&tlmm 0 0 146>; |
| 787 |
#gpio-cells = <2>; |
| 788 |
interrupt-controller; |
| 789 |
#interrupt-cells = <2>; |
| 790 |
|
| 791 |
blsp1_uart2_default: blsp1-uart2-default-state { |
| 792 |
pins = "gpio4", "gpio5"; |
| 793 |
function = "blsp_uart2"; |
| 794 |
drive-strength = <16>; |
| 795 |
bias-disable; |
| 796 |
}; |
| 797 |
|
| 798 |
blsp1_uart2_sleep: blsp1-uart2-sleep-state { |
| 799 |
pins = "gpio4", "gpio5"; |
| 800 |
function = "gpio"; |
| 801 |
drive-strength = <2>; |
| 802 |
bias-pull-down; |
| 803 |
}; |
| 804 |
|
| 805 |
blsp2_uart2_default: blsp2-uart2-default-state { |
| 806 |
pins = "gpio45", "gpio46", "gpio47", "gpio48"; |
| 807 |
function = "blsp_uart8"; |
| 808 |
drive-strength = <16>; |
| 809 |
bias-disable; |
| 810 |
}; |
| 811 |
|
| 812 |
blsp2_uart2_sleep: blsp2-uart2-sleep-state { |
| 813 |
pins = "gpio45", "gpio46", "gpio47", "gpio48"; |
| 814 |
function = "gpio"; |
| 815 |
drive-strength = <2>; |
| 816 |
bias-disable; |
| 817 |
}; |
| 818 |
|
| 819 |
i2c1_default: i2c1-default-state { |
| 820 |
pins = "gpio2", "gpio3"; |
| 821 |
function = "blsp_i2c1"; |
| 822 |
drive-strength = <2>; |
| 823 |
bias-disable; |
| 824 |
}; |
| 825 |
|
| 826 |
i2c1_sleep: i2c1-sleep-state { |
| 827 |
pins = "gpio2", "gpio3"; |
| 828 |
function = "gpio"; |
| 829 |
drive-strength = <2>; |
| 830 |
bias-disable; |
| 831 |
}; |
| 832 |
|
| 833 |
i2c2_default: i2c2-default-state { |
| 834 |
pins = "gpio6", "gpio7"; |
| 835 |
function = "blsp_i2c2"; |
| 836 |
drive-strength = <2>; |
| 837 |
bias-disable; |
| 838 |
}; |
| 839 |
|
| 840 |
i2c2_sleep: i2c2-sleep-state { |
| 841 |
pins = "gpio6", "gpio7"; |
| 842 |
function = "gpio"; |
| 843 |
drive-strength = <2>; |
| 844 |
bias-disable; |
| 845 |
}; |
| 846 |
|
| 847 |
i2c4_default: i2c4-default-state { |
| 848 |
pins = "gpio19", "gpio20"; |
| 849 |
function = "blsp_i2c4"; |
| 850 |
drive-strength = <2>; |
| 851 |
bias-disable; |
| 852 |
}; |
| 853 |
|
| 854 |
i2c4_sleep: i2c4-sleep-state { |
| 855 |
pins = "gpio19", "gpio20"; |
| 856 |
function = "gpio"; |
| 857 |
drive-strength = <2>; |
| 858 |
bias-pull-down; |
| 859 |
}; |
| 860 |
|
| 861 |
i2c5_default: i2c5-default-state { |
| 862 |
pins = "gpio23", "gpio24"; |
| 863 |
function = "blsp_i2c5"; |
| 864 |
drive-strength = <2>; |
| 865 |
bias-disable; |
| 866 |
}; |
| 867 |
|
| 868 |
i2c5_sleep: i2c5-sleep-state { |
| 869 |
pins = "gpio23", "gpio24"; |
| 870 |
function = "gpio"; |
| 871 |
drive-strength = <2>; |
| 872 |
bias-disable; |
| 873 |
}; |
| 874 |
|
| 875 |
i2c6_default: i2c6-default-state { |
| 876 |
pins = "gpio28", "gpio27"; |
| 877 |
function = "blsp_i2c6"; |
| 878 |
drive-strength = <2>; |
| 879 |
bias-disable; |
| 880 |
}; |
| 881 |
|
| 882 |
i2c6_sleep: i2c6-sleep-state { |
| 883 |
pins = "gpio28", "gpio27"; |
| 884 |
function = "gpio"; |
| 885 |
drive-strength = <2>; |
| 886 |
bias-disable; |
| 887 |
}; |
| 888 |
|
| 889 |
i2c7_default: i2c7-default-state { |
| 890 |
pins = "gpio44", "gpio43"; |
| 891 |
function = "blsp_i2c7"; |
| 892 |
drive-strength = <2>; |
| 893 |
bias-disable; |
| 894 |
}; |
| 895 |
|
| 896 |
i2c7_sleep: i2c7-sleep-state { |
| 897 |
pins = "gpio44", "gpio43"; |
| 898 |
function = "gpio"; |
| 899 |
drive-strength = <2>; |
| 900 |
bias-disable; |
| 901 |
}; |
| 902 |
|
| 903 |
blsp2_spi10_default: blsp2-spi10-default-state { |
| 904 |
default-pins { |
| 905 |
pins = "gpio53", "gpio54", "gpio55"; |
| 906 |
function = "blsp_spi10"; |
| 907 |
drive-strength = <10>; |
| 908 |
bias-pull-down; |
| 909 |
}; |
| 910 |
|
| 911 |
cs-pins { |
| 912 |
pins = "gpio67"; |
| 913 |
function = "gpio"; |
| 914 |
drive-strength = <2>; |
| 915 |
bias-disable; |
| 916 |
}; |
| 917 |
}; |
| 918 |
|
| 919 |
blsp2_spi10_sleep: blsp2-spi10-sleep-state { |
| 920 |
pins = "gpio53", "gpio54", "gpio55"; |
| 921 |
function = "gpio"; |
| 922 |
drive-strength = <2>; |
| 923 |
bias-disable; |
| 924 |
}; |
| 925 |
|
| 926 |
i2c11_default: i2c11-default-state { |
| 927 |
pins = "gpio83", "gpio84"; |
| 928 |
function = "blsp_i2c11"; |
| 929 |
drive-strength = <2>; |
| 930 |
bias-disable; |
| 931 |
}; |
| 932 |
|
| 933 |
i2c11_sleep: i2c11-sleep-state { |
| 934 |
pins = "gpio83", "gpio84"; |
| 935 |
function = "gpio"; |
| 936 |
drive-strength = <2>; |
| 937 |
bias-disable; |
| 938 |
}; |
| 939 |
|
| 940 |
blsp1_spi1_default: blsp1-spi1-default-state { |
| 941 |
default-pins { |
| 942 |
pins = "gpio0", "gpio1", "gpio3"; |
| 943 |
function = "blsp_spi1"; |
| 944 |
drive-strength = <10>; |
| 945 |
bias-pull-down; |
| 946 |
}; |
| 947 |
|
| 948 |
cs-pins { |
| 949 |
pins = "gpio8"; |
| 950 |
function = "gpio"; |
| 951 |
drive-strength = <2>; |
| 952 |
bias-disable; |
| 953 |
}; |
| 954 |
}; |
| 955 |
|
| 956 |
blsp1_spi1_sleep: blsp1-spi1-sleep-state { |
| 957 |
pins = "gpio0", "gpio1", "gpio3"; |
| 958 |
function = "gpio"; |
| 959 |
drive-strength = <2>; |
| 960 |
bias-disable; |
| 961 |
}; |
| 962 |
|
| 963 |
sdc1_clk_on: clk-on-state { |
| 964 |
pins = "sdc1_clk"; |
| 965 |
bias-disable; |
| 966 |
drive-strength = <16>; |
| 967 |
}; |
| 968 |
|
| 969 |
sdc1_clk_off: clk-off-state { |
| 970 |
pins = "sdc1_clk"; |
| 971 |
bias-disable; |
| 972 |
drive-strength = <2>; |
| 973 |
}; |
| 974 |
|
| 975 |
sdc1_cmd_on: cmd-on-state { |
| 976 |
pins = "sdc1_cmd"; |
| 977 |
bias-pull-up; |
| 978 |
drive-strength = <8>; |
| 979 |
}; |
| 980 |
|
| 981 |
sdc1_cmd_off: cmd-off-state { |
| 982 |
pins = "sdc1_cmd"; |
| 983 |
bias-pull-up; |
| 984 |
drive-strength = <2>; |
| 985 |
}; |
| 986 |
|
| 987 |
sdc1_data_on: data-on-state { |
| 988 |
pins = "sdc1_data"; |
| 989 |
bias-pull-up; |
| 990 |
drive-strength = <8>; |
| 991 |
}; |
| 992 |
|
| 993 |
sdc1_data_off: data-off-state { |
| 994 |
pins = "sdc1_data"; |
| 995 |
bias-pull-up; |
| 996 |
drive-strength = <2>; |
| 997 |
}; |
| 998 |
|
| 999 |
sdc1_rclk_on: rclk-on-state { |
| 1000 |
pins = "sdc1_rclk"; |
| 1001 |
bias-pull-down; |
| 1002 |
}; |
| 1003 |
|
| 1004 |
sdc1_rclk_off: rclk-off-state { |
| 1005 |
pins = "sdc1_rclk"; |
| 1006 |
bias-pull-down; |
| 1007 |
}; |
| 1008 |
|
| 1009 |
sdc2_clk_on: sdc2-clk-on-state { |
| 1010 |
pins = "sdc2_clk"; |
| 1011 |
bias-disable; |
| 1012 |
drive-strength = <10>; |
| 1013 |
}; |
| 1014 |
|
| 1015 |
sdc2_clk_off: sdc2-clk-off-state { |
| 1016 |
pins = "sdc2_clk"; |
| 1017 |
bias-disable; |
| 1018 |
drive-strength = <2>; |
| 1019 |
}; |
| 1020 |
|
| 1021 |
sdc2_cmd_on: sdc2-cmd-on-state { |
| 1022 |
pins = "sdc2_cmd"; |
| 1023 |
bias-pull-up; |
| 1024 |
drive-strength = <10>; |
| 1025 |
}; |
| 1026 |
|
| 1027 |
sdc2_cmd_off: sdc2-cmd-off-state { |
| 1028 |
pins = "sdc2_cmd"; |
| 1029 |
bias-pull-up; |
| 1030 |
drive-strength = <2>; |
| 1031 |
}; |
| 1032 |
|
| 1033 |
sdc2_data_on: sdc2-data-on-state { |
| 1034 |
pins = "sdc2_data"; |
| 1035 |
bias-pull-up; |
| 1036 |
drive-strength = <10>; |
| 1037 |
}; |
| 1038 |
|
| 1039 |
sdc2_data_off: sdc2-data-off-state { |
| 1040 |
pins = "sdc2_data"; |
| 1041 |
bias-pull-up; |
| 1042 |
drive-strength = <2>; |
| 1043 |
}; |
| 1044 |
}; |
| 1045 |
|
| 1046 |
mmcc: clock-controller@fd8c0000 { |
| 1047 |
compatible = "qcom,mmcc-msm8994"; |
| 1048 |
reg = <0xfd8c0000 0x5200>; |
| 1049 |
#clock-cells = <1>; |
| 1050 |
#reset-cells = <1>; |
| 1051 |
#power-domain-cells = <1>; |
| 1052 |
|
| 1053 |
clock-names = "xo", |
| 1054 |
"gpll0", |
| 1055 |
"mmssnoc_ahb", |
| 1056 |
"oxili_gfx3d_clk_src", |
| 1057 |
"dsi0pll", |
| 1058 |
"dsi0pllbyte", |
| 1059 |
"dsi1pll", |
| 1060 |
"dsi1pllbyte", |
| 1061 |
"hdmipll"; |
| 1062 |
clocks = <&xo_board>, |
| 1063 |
<&gcc GPLL0_OUT_MMSSCC>, |
| 1064 |
<&rpmcc RPM_SMD_MMSSNOC_AHB_CLK>, |
| 1065 |
<&rpmcc RPM_SMD_GFX3D_CLK_SRC>, |
| 1066 |
<0>, |
| 1067 |
<0>, |
| 1068 |
<0>, |
| 1069 |
<0>, |
| 1070 |
<0>; |
| 1071 |
|
| 1072 |
assigned-clocks = <&mmcc MMPLL0_PLL>, |
| 1073 |
<&mmcc MMPLL1_PLL>, |
| 1074 |
<&mmcc MMPLL3_PLL>, |
| 1075 |
<&mmcc MMPLL4_PLL>, |
| 1076 |
<&mmcc MMPLL5_PLL>; |
| 1077 |
assigned-clock-rates = <800000000>, |
| 1078 |
<1167000000>, |
| 1079 |
<1020000000>, |
| 1080 |
<960000000>, |
| 1081 |
<600000000>; |
| 1082 |
}; |
| 1083 |
|
| 1084 |
ocmem: sram@fdd00000 { |
| 1085 |
compatible = "qcom,msm8974-ocmem"; |
| 1086 |
reg = <0xfdd00000 0x2000>, |
| 1087 |
<0xfec00000 0x200000>; |
| 1088 |
reg-names = "ctrl", "mem"; |
| 1089 |
ranges = <0 0xfec00000 0x200000>; |
| 1090 |
clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, |
| 1091 |
<&mmcc OCMEMCX_OCMEMNOC_CLK>; |
| 1092 |
clock-names = "core", "iface"; |
| 1093 |
|
| 1094 |
#address-cells = <1>; |
| 1095 |
#size-cells = <1>; |
| 1096 |
|
| 1097 |
gmu_sram: gmu-sram@0 { |
| 1098 |
reg = <0x0 0x180000>; |
| 1099 |
}; |
| 1100 |
}; |
| 1101 |
}; |
| 1102 |
|
| 1103 |
timer: timer { |
| 1104 |
compatible = "arm,armv8-timer"; |
| 1105 |
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 1106 |
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 1107 |
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 1108 |
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| 1109 |
}; |
| 1110 |
|
| 1111 |
vph_pwr: vph-pwr-regulator { |
| 1112 |
compatible = "regulator-fixed"; |
| 1113 |
regulator-name = "vph_pwr"; |
| 1114 |
|
| 1115 |
regulator-min-microvolt = <3600000>; |
| 1116 |
regulator-max-microvolt = <3600000>; |
| 1117 |
|
| 1118 |
regulator-always-on; |
| 1119 |
}; |
| 1120 |
}; |
| 1121 |
|