| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2020, Konrad Dybcio |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include "msm8992.dtsi" |
| 9 |
#include "pm8994.dtsi" |
| 10 |
#include "pmi8994.dtsi" |
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include <dt-bindings/input/gpio-keys.h> |
| 13 |
|
| 14 |
/delete-node/ &adsp_mem; |
| 15 |
/delete-node/ &audio_mem; |
| 16 |
/delete-node/ &mpss_mem; |
| 17 |
/delete-node/ &peripheral_region; |
| 18 |
/delete-node/ &res_hyp_mem; |
| 19 |
/delete-node/ &rmtfs_mem; |
| 20 |
|
| 21 |
/ { |
| 22 |
model = "Xiaomi Mi 4C"; |
| 23 |
compatible = "xiaomi,libra", "qcom,msm8992"; |
| 24 |
chassis-type = "handset"; |
| 25 |
|
| 26 |
/* required for bootloader to select correct board */ |
| 27 |
qcom,msm-id = <251 0>, <252 0>; |
| 28 |
qcom,pmic-id = <65545 65546 0 0>; |
| 29 |
qcom,board-id = <12 0>; |
| 30 |
|
| 31 |
/* This enables graphical output via bootloader-enabled display */ |
| 32 |
chosen { |
| 33 |
bootargs = "earlycon=tty0 console=tty0 maxcpus=1"; |
| 34 |
|
| 35 |
#address-cells = <2>; |
| 36 |
#size-cells = <2>; |
| 37 |
ranges; |
| 38 |
|
| 39 |
framebuffer0: framebuffer@3400000 { |
| 40 |
compatible = "simple-framebuffer"; |
| 41 |
reg = <0 0x3400000 0 (1080 * 1920 * 3)>; |
| 42 |
width = <1080>; |
| 43 |
height = <1920>; |
| 44 |
stride = <(1080 * 3)>; |
| 45 |
format = "r8g8b8"; |
| 46 |
/* |
| 47 |
* That's a lot of clocks, but it's necessary due |
| 48 |
* to unused clk cleanup & no panel driver yet.. |
| 49 |
*/ |
| 50 |
clocks = <&mmcc MDSS_AHB_CLK>, |
| 51 |
<&mmcc MDSS_AXI_CLK>, |
| 52 |
<&mmcc MDSS_VSYNC_CLK>, |
| 53 |
<&mmcc MDSS_MDP_CLK>, |
| 54 |
<&mmcc MDSS_BYTE0_CLK>, |
| 55 |
<&mmcc MDSS_PCLK0_CLK>, |
| 56 |
<&mmcc MDSS_ESC0_CLK>; |
| 57 |
power-domains = <&mmcc MDSS_GDSC>; |
| 58 |
}; |
| 59 |
}; |
| 60 |
|
| 61 |
gpio-keys { |
| 62 |
compatible = "gpio-keys"; |
| 63 |
autorepeat; |
| 64 |
|
| 65 |
button { |
| 66 |
label = "Volume Up"; |
| 67 |
gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; |
| 68 |
linux,input-type = <1>; |
| 69 |
linux,code = <KEY_VOLUMEUP>; |
| 70 |
wakeup-source; |
| 71 |
debounce-interval = <15>; |
| 72 |
}; |
| 73 |
}; |
| 74 |
|
| 75 |
reserved-memory { |
| 76 |
#address-cells = <2>; |
| 77 |
#size-cells = <2>; |
| 78 |
ranges; |
| 79 |
|
| 80 |
memory_hole: hole@6400000 { |
| 81 |
reg = <0 0x06400000 0 0x600000>; |
| 82 |
no-map; |
| 83 |
}; |
| 84 |
|
| 85 |
memory_hole2: hole2@6c00000 { |
| 86 |
reg = <0 0x06c00000 0 0x2400000>; |
| 87 |
no-map; |
| 88 |
}; |
| 89 |
|
| 90 |
mpss_mem: mpss@9000000 { |
| 91 |
reg = <0 0x09000000 0 0x5a00000>; |
| 92 |
no-map; |
| 93 |
}; |
| 94 |
|
| 95 |
tzapp: tzapp@ea00000 { |
| 96 |
reg = <0 0x0ea00000 0 0x1900000>; |
| 97 |
no-map; |
| 98 |
}; |
| 99 |
|
| 100 |
mdm_rfsa_mem: mdm-rfsa@ca0b0000 { |
| 101 |
reg = <0 0xca0b0000 0 0x10000>; |
| 102 |
no-map; |
| 103 |
}; |
| 104 |
|
| 105 |
rmtfs_mem: rmtfs@ca100000 { |
| 106 |
compatible = "qcom,rmtfs-mem"; |
| 107 |
reg = <0 0xca100000 0 0x180000>; |
| 108 |
no-map; |
| 109 |
|
| 110 |
qcom,client-id = <1>; |
| 111 |
}; |
| 112 |
|
| 113 |
qseecom_mem: qseecom@cb400000 { |
| 114 |
reg = <0 0xcb400000 0 0x1c00000>; |
| 115 |
no-mem; |
| 116 |
}; |
| 117 |
|
| 118 |
adsp_rfsa_mem: adsp-rfsa@cd000000 { |
| 119 |
reg = <0 0xcd000000 0 0x10000>; |
| 120 |
no-map; |
| 121 |
}; |
| 122 |
|
| 123 |
sensor_rfsa_mem: sensor-rfsa@cd010000 { |
| 124 |
reg = <0 0xcd010000 0 0x10000>; |
| 125 |
no-map; |
| 126 |
}; |
| 127 |
|
| 128 |
ramoops@dfc00000 { |
| 129 |
compatible = "ramoops"; |
| 130 |
reg = <0 0xdfc00000 0 0x40000>; |
| 131 |
console-size = <0x10000>; |
| 132 |
record-size = <0x10000>; |
| 133 |
ftrace-size = <0x10000>; |
| 134 |
pmsg-size = <0x20000>; |
| 135 |
}; |
| 136 |
}; |
| 137 |
}; |
| 138 |
|
| 139 |
&blsp1_i2c2 { |
| 140 |
status = "okay"; |
| 141 |
|
| 142 |
/* Atmel or Synaptics touchscreen */ |
| 143 |
}; |
| 144 |
|
| 145 |
&blsp1_i2c5 { |
| 146 |
status = "okay"; |
| 147 |
|
| 148 |
/* ST lsm6db0 gyro/accelerometer */ |
| 149 |
}; |
| 150 |
|
| 151 |
&blsp1_i2c6 { |
| 152 |
status = "okay"; |
| 153 |
|
| 154 |
/* |
| 155 |
* NXP NCI NFC, |
| 156 |
* TI USB320 Type-C controller, |
| 157 |
* Pericom 30216a USB (de)mux switch |
| 158 |
*/ |
| 159 |
}; |
| 160 |
|
| 161 |
&blsp2_i2c1 { |
| 162 |
status = "okay"; |
| 163 |
|
| 164 |
/* cm36686 proximity and ambient light sensor */ |
| 165 |
}; |
| 166 |
|
| 167 |
&blsp2_i2c5 { |
| 168 |
status = "okay"; |
| 169 |
|
| 170 |
/* Silabs si4705 FM transmitter */ |
| 171 |
}; |
| 172 |
|
| 173 |
&blsp2_uart2 { |
| 174 |
status = "okay"; |
| 175 |
}; |
| 176 |
|
| 177 |
&pm8994_spmi_regulators { |
| 178 |
s8 { |
| 179 |
regulator-min-microvolt = <680000>; |
| 180 |
regulator-max-microvolt = <1180000>; |
| 181 |
regulator-always-on; |
| 182 |
regulator-boot-on; |
| 183 |
}; |
| 184 |
|
| 185 |
/* APC1 is 3-phase, but quoting downstream, s11 is "the gang leader" */ |
| 186 |
s11 { |
| 187 |
regulator-min-microvolt = <700000>; |
| 188 |
regulator-max-microvolt = <1225000>; |
| 189 |
regulator-always-on; |
| 190 |
regulator-boot-on; |
| 191 |
}; |
| 192 |
}; |
| 193 |
|
| 194 |
&rpm_requests { |
| 195 |
regulators-0 { |
| 196 |
compatible = "qcom,rpm-pm8994-regulators"; |
| 197 |
|
| 198 |
vdd_l1-supply = <&pm8994_s7>; |
| 199 |
vdd_l2_26_28-supply = <&pm8994_s3>; |
| 200 |
vdd_l3_11-supply = <&pm8994_s3>; |
| 201 |
vdd_l4_27_31-supply = <&pm8994_s3>; |
| 202 |
vdd_l5_7-supply = <&pm8994_s3>; |
| 203 |
vdd_l6_12_32-supply = <&pm8994_s5>; |
| 204 |
vdd_l8_16_30-supply = <&vph_pwr>; |
| 205 |
vdd_l9_10_18_22-supply = <&vph_pwr>; |
| 206 |
vdd_l13_19_23_24-supply = <&vph_pwr>; |
| 207 |
vdd_l14_15-supply = <&pm8994_s5>; |
| 208 |
vdd_l17_29-supply = <&vph_pwr>; |
| 209 |
vdd_l20_21-supply = <&vph_pwr>; |
| 210 |
vdd_l25-supply = <&pm8994_s5>; |
| 211 |
vdd_lvs1_2-supply = <&pm8994_s4>; |
| 212 |
|
| 213 |
/* S1, S2, S6 and S12 are managed by RPMPD */ |
| 214 |
|
| 215 |
pm8994_s3: s3 { |
| 216 |
regulator-min-microvolt = <1300000>; |
| 217 |
regulator-max-microvolt = <1300000>; |
| 218 |
}; |
| 219 |
|
| 220 |
pm8994_s4: s4 { |
| 221 |
regulator-min-microvolt = <1800000>; |
| 222 |
regulator-max-microvolt = <1800000>; |
| 223 |
regulator-allow-set-load; |
| 224 |
regulator-always-on; |
| 225 |
regulator-system-load = <325000>; |
| 226 |
}; |
| 227 |
|
| 228 |
pm8994_s5: s5 { |
| 229 |
regulator-min-microvolt = <2150000>; |
| 230 |
regulator-max-microvolt = <2150000>; |
| 231 |
}; |
| 232 |
|
| 233 |
pm8994_s7: s7 { |
| 234 |
regulator-min-microvolt = <1000000>; |
| 235 |
regulator-max-microvolt = <1000000>; |
| 236 |
}; |
| 237 |
|
| 238 |
/* S8, S9, S10 and S11 - SPMI-managed VDD_APC */ |
| 239 |
|
| 240 |
pm8994_l1: l1 { |
| 241 |
regulator-min-microvolt = <1000000>; |
| 242 |
regulator-max-microvolt = <1000000>; |
| 243 |
}; |
| 244 |
|
| 245 |
pm8994_l2: l2 { |
| 246 |
regulator-min-microvolt = <1250000>; |
| 247 |
regulator-max-microvolt = <1250000>; |
| 248 |
}; |
| 249 |
|
| 250 |
pm8994_l3: l3 { |
| 251 |
regulator-min-microvolt = <1200000>; |
| 252 |
regulator-max-microvolt = <1200000>; |
| 253 |
}; |
| 254 |
|
| 255 |
pm8994_l4: l4 { |
| 256 |
regulator-min-microvolt = <1225000>; |
| 257 |
regulator-max-microvolt = <1225000>; |
| 258 |
}; |
| 259 |
|
| 260 |
/* L5 is inaccessible from RPM */ |
| 261 |
|
| 262 |
pm8994_l6: l6 { |
| 263 |
regulator-min-microvolt = <1800000>; |
| 264 |
regulator-max-microvolt = <1800000>; |
| 265 |
}; |
| 266 |
|
| 267 |
/* L7 is inaccessible from RPM */ |
| 268 |
|
| 269 |
pm8994_l8: l8 { |
| 270 |
regulator-min-microvolt = <1800000>; |
| 271 |
regulator-max-microvolt = <1800000>; |
| 272 |
}; |
| 273 |
|
| 274 |
pm8994_l9: l9 { |
| 275 |
regulator-min-microvolt = <1800000>; |
| 276 |
regulator-max-microvolt = <1800000>; |
| 277 |
}; |
| 278 |
|
| 279 |
pm8994_l10: l10 { |
| 280 |
regulator-min-microvolt = <1800000>; |
| 281 |
regulator-max-microvolt = <1800000>; |
| 282 |
}; |
| 283 |
|
| 284 |
pm8994_l11: l11 { |
| 285 |
regulator-min-microvolt = <1200000>; |
| 286 |
regulator-max-microvolt = <1200000>; |
| 287 |
}; |
| 288 |
|
| 289 |
pm8994_l12: l12 { |
| 290 |
regulator-min-microvolt = <1800000>; |
| 291 |
regulator-max-microvolt = <1800000>; |
| 292 |
}; |
| 293 |
|
| 294 |
pm8994_l13: l13 { |
| 295 |
regulator-min-microvolt = <1800000>; |
| 296 |
regulator-max-microvolt = <2950000>; |
| 297 |
}; |
| 298 |
|
| 299 |
pm8994_l14: l14 { |
| 300 |
regulator-min-microvolt = <1800000>; |
| 301 |
regulator-max-microvolt = <1800000>; |
| 302 |
}; |
| 303 |
|
| 304 |
pm8994_l15: l15 { |
| 305 |
regulator-min-microvolt = <1800000>; |
| 306 |
regulator-max-microvolt = <1800000>; |
| 307 |
}; |
| 308 |
|
| 309 |
pm8994_l16: l16 { |
| 310 |
regulator-min-microvolt = <2700000>; |
| 311 |
regulator-max-microvolt = <2700000>; |
| 312 |
}; |
| 313 |
|
| 314 |
pm8994_l17: l17 { |
| 315 |
regulator-min-microvolt = <2700000>; |
| 316 |
regulator-max-microvolt = <2700000>; |
| 317 |
}; |
| 318 |
|
| 319 |
pm8994_l18: l18 { |
| 320 |
regulator-min-microvolt = <2850000>; |
| 321 |
regulator-max-microvolt = <2850000>; |
| 322 |
regulator-always-on; |
| 323 |
}; |
| 324 |
|
| 325 |
pm8994_l19: l19 { |
| 326 |
regulator-min-microvolt = <2800000>; |
| 327 |
regulator-max-microvolt = <2800000>; |
| 328 |
}; |
| 329 |
|
| 330 |
pm8994_l20: l20 { |
| 331 |
regulator-min-microvolt = <2950000>; |
| 332 |
regulator-max-microvolt = <2950000>; |
| 333 |
regulator-always-on; |
| 334 |
regulator-boot-on; |
| 335 |
regulator-allow-set-load; |
| 336 |
regulator-system-load = <570000>; |
| 337 |
}; |
| 338 |
|
| 339 |
pm8994_l21: l21 { |
| 340 |
regulator-min-microvolt = <2950000>; |
| 341 |
regulator-max-microvolt = <2950000>; |
| 342 |
regulator-always-on; |
| 343 |
}; |
| 344 |
|
| 345 |
pm8994_l22: l22 { |
| 346 |
regulator-min-microvolt = <3000000>; |
| 347 |
regulator-max-microvolt = <3000000>; |
| 348 |
}; |
| 349 |
|
| 350 |
pm8994_l23: l23 { |
| 351 |
regulator-min-microvolt = <2800000>; |
| 352 |
regulator-max-microvolt = <2800000>; |
| 353 |
}; |
| 354 |
|
| 355 |
pm8994_l24: l24 { |
| 356 |
regulator-min-microvolt = <3075000>; |
| 357 |
regulator-max-microvolt = <3150000>; |
| 358 |
}; |
| 359 |
|
| 360 |
pm8994_l25: l25 { |
| 361 |
regulator-min-microvolt = <1000000>; |
| 362 |
regulator-max-microvolt = <1000000>; |
| 363 |
}; |
| 364 |
|
| 365 |
pm8994_l26: l26 { |
| 366 |
regulator-min-microvolt = <987500>; |
| 367 |
regulator-max-microvolt = <987500>; |
| 368 |
|
| 369 |
}; |
| 370 |
|
| 371 |
pm8994_l27: l27 { |
| 372 |
regulator-min-microvolt = <1050000>; |
| 373 |
regulator-max-microvolt = <1050000>; |
| 374 |
}; |
| 375 |
|
| 376 |
pm8994_l28: l28 { |
| 377 |
regulator-min-microvolt = <1000000>; |
| 378 |
regulator-max-microvolt = <1000000>; |
| 379 |
}; |
| 380 |
|
| 381 |
pm8994_l29: l29 { |
| 382 |
regulator-min-microvolt = <2800000>; |
| 383 |
regulator-max-microvolt = <2800000>; |
| 384 |
}; |
| 385 |
|
| 386 |
pm8994_l30: l30 { |
| 387 |
regulator-min-microvolt = <1800000>; |
| 388 |
regulator-max-microvolt = <1800000>; |
| 389 |
}; |
| 390 |
|
| 391 |
pm8994_l31: l31 { |
| 392 |
regulator-min-microvolt = <1262500>; |
| 393 |
regulator-max-microvolt = <1262500>; |
| 394 |
}; |
| 395 |
|
| 396 |
pm8994_l32: l32 { |
| 397 |
regulator-min-microvolt = <1800000>; |
| 398 |
regulator-max-microvolt = <1800000>; |
| 399 |
}; |
| 400 |
|
| 401 |
pm8994_lvs1: lvs1 {}; |
| 402 |
pm8994_lvs2: lvs2 {}; |
| 403 |
}; |
| 404 |
|
| 405 |
pmi8994_regulators: regulators-1 { |
| 406 |
compatible = "qcom,rpm-pmi8994-regulators"; |
| 407 |
vdd_s1-supply = <&vph_pwr>; |
| 408 |
vdd_bst_byp-supply = <&vph_pwr>; |
| 409 |
|
| 410 |
pmi8994_s1: s1 { |
| 411 |
regulator-min-microvolt = <1025000>; |
| 412 |
regulator-max-microvolt = <1025000>; |
| 413 |
}; |
| 414 |
|
| 415 |
/* S2 & S3 - VDD_GFX */ |
| 416 |
|
| 417 |
pmi8994_bby: boost-bypass { |
| 418 |
regulator-min-microvolt = <3150000>; |
| 419 |
regulator-max-microvolt = <3600000>; |
| 420 |
}; |
| 421 |
}; |
| 422 |
}; |
| 423 |
|
| 424 |
&sdhc1 { |
| 425 |
status = "okay"; |
| 426 |
|
| 427 |
mmc-hs400-1_8v; |
| 428 |
vmmc-supply = <&pm8994_l20>; |
| 429 |
vqmmc-supply = <&pm8994_s4>; |
| 430 |
}; |