| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2016-2022, AngeloGioacchino Del Regno |
| 4 |
* <[email protected]> |
| 5 |
* Copyright (c) 2022, Konrad Dybcio <[email protected]> |
| 6 |
* Copyright (c) 2022, Marijn Suijten <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
#include "msm8956.dtsi" |
| 10 |
|
| 11 |
#include "pm8004.dtsi" |
| 12 |
#include "pm8950.dtsi" |
| 13 |
#include "pmi8950.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
qcom,msm-id = <266 0x10001>; /* MSM8956 v1.1 */ |
| 17 |
qcom,board-id = <8 0>; |
| 18 |
|
| 19 |
aliases { |
| 20 |
mmc0 = &sdhc_1; /* SDC1 eMMC slot */ |
| 21 |
mmc1 = &sdhc_2; /* SDC2 SD card slot */ |
| 22 |
mmc2 = &sdhc_3; /* SDC3 SDIO card slot */ |
| 23 |
serial0 = &blsp2_uart2; |
| 24 |
}; |
| 25 |
|
| 26 |
chosen { |
| 27 |
stdout-path = "serial0:115200n8"; |
| 28 |
}; |
| 29 |
|
| 30 |
reserved-memory { |
| 31 |
cont-splash@83000000 { |
| 32 |
reg = <0x0 0x83000000 0x0 0x2800000>; |
| 33 |
}; |
| 34 |
|
| 35 |
ramoops@57f00000 { |
| 36 |
compatible = "ramoops"; |
| 37 |
reg = <0 0x57f00000 0 0x100000>; |
| 38 |
record-size = <0x20000>; |
| 39 |
console-size = <0x40000>; |
| 40 |
ftrace-size = <0x20000>; |
| 41 |
pmsg-size = <0x20000>; |
| 42 |
ecc-size = <16>; |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
usbphy_1p2: regulator-usbphy-1p2 { |
| 47 |
compatible = "regulator-fixed"; |
| 48 |
regulator-name = "usbphy-1p2"; |
| 49 |
regulator-always-on; |
| 50 |
regulator-boot-on; |
| 51 |
regulator-min-microvolt = <1200000>; |
| 52 |
regulator-max-microvolt = <1200000>; |
| 53 |
vin-supply = <&vph_pwr>; |
| 54 |
}; |
| 55 |
|
| 56 |
vph_pwr: regulator-vph-pwr { |
| 57 |
compatible = "regulator-fixed"; |
| 58 |
regulator-name = "vph-pwr"; |
| 59 |
regulator-always-on; |
| 60 |
regulator-boot-on; |
| 61 |
}; |
| 62 |
}; |
| 63 |
|
| 64 |
&blsp1_i2c4 { |
| 65 |
status = "okay"; |
| 66 |
|
| 67 |
/* Synaptics RMI4 @ 2c */ |
| 68 |
}; |
| 69 |
|
| 70 |
&blsp2_uart2 { |
| 71 |
status = "okay"; |
| 72 |
}; |
| 73 |
|
| 74 |
&gcc { |
| 75 |
vdd_gfx-supply = <&pm8004_s5>; |
| 76 |
}; |
| 77 |
|
| 78 |
&otg { |
| 79 |
status = "okay"; |
| 80 |
}; |
| 81 |
|
| 82 |
&pm8004_spmi_regulators { |
| 83 |
vdd_s2-supply = <&vph_pwr>; |
| 84 |
vdd_s5-supply = <&vph_pwr>; |
| 85 |
|
| 86 |
/* Cluster 1 supply */ |
| 87 |
pm8004_s2: s2 { |
| 88 |
/* regulator-min-microvolt = <500000>; */ |
| 89 |
/* Set .95V to prevent unstabilities until CPR for this SoC is done */ |
| 90 |
regulator-min-microvolt = <950000>; |
| 91 |
regulator-max-microvolt = <1165000>; |
| 92 |
regulator-name = "vdd_apc1"; |
| 93 |
/* Set always on until the CPU PLL is done */ |
| 94 |
regulator-always-on; |
| 95 |
regulator-boot-on; |
| 96 |
}; |
| 97 |
|
| 98 |
pm8004_s5: s5 { |
| 99 |
regulator-min-microvolt = <950000>; |
| 100 |
regulator-max-microvolt = <1165000>; |
| 101 |
regulator-enable-ramp-delay = <500>; |
| 102 |
regulator-name = "vdd_gfx"; |
| 103 |
/* Hack this on until the gpu driver is ready for it */ |
| 104 |
regulator-always-on; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
&pm8950_spmi_regulators { |
| 109 |
vdd_s5-supply = <&vph_pwr>; |
| 110 |
|
| 111 |
/* Cluster 0 supply */ |
| 112 |
pm8950_spmi_s5: s5 { |
| 113 |
/* Set .95V to prevent unstabilities until CPR for this SoC is done */ |
| 114 |
/* regulator-min-microvolt = <790000>; */ |
| 115 |
regulator-min-microvolt = <950000>; |
| 116 |
regulator-max-microvolt = <1165000>; |
| 117 |
regulator-name = "vdd_apc0"; |
| 118 |
/* Set always on until the CPU PLL is done */ |
| 119 |
regulator-always-on; |
| 120 |
regulator-boot-on; |
| 121 |
}; |
| 122 |
}; |
| 123 |
|
| 124 |
&rpm_requests { |
| 125 |
pm8950_regulators: regulators { |
| 126 |
compatible = "qcom,rpm-pm8950-regulators"; |
| 127 |
|
| 128 |
vdd_s1-supply = <&vph_pwr>; |
| 129 |
vdd_s2-supply = <&vph_pwr>; |
| 130 |
vdd_s3-supply = <&vph_pwr>; |
| 131 |
vdd_s4-supply = <&vph_pwr>; |
| 132 |
vdd_s6-supply = <&vph_pwr>; |
| 133 |
vdd_l1_l19-supply = <&pm8950_s3>; |
| 134 |
vdd_l2_l23-supply = <&pm8950_s3>; |
| 135 |
vdd_l3-supply = <&pm8950_s3>; |
| 136 |
vdd_l5_l6_l7_l16-supply = <&pm8950_s4>; |
| 137 |
vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>; |
| 138 |
|
| 139 |
pm8950_s1: s1 { |
| 140 |
regulator-min-microvolt = <1000000>; |
| 141 |
regulator-max-microvolt = <1162500>; |
| 142 |
}; |
| 143 |
|
| 144 |
pm8950_s3: s3 { |
| 145 |
regulator-min-microvolt = <1325000>; |
| 146 |
regulator-max-microvolt = <1325000>; |
| 147 |
regulator-always-on; |
| 148 |
}; |
| 149 |
|
| 150 |
pm8950_s4: s4 { |
| 151 |
regulator-min-microvolt = <1800000>; |
| 152 |
regulator-max-microvolt = <1800000>; |
| 153 |
regulator-always-on; |
| 154 |
}; |
| 155 |
|
| 156 |
pm8950_l1: l1 { |
| 157 |
regulator-min-microvolt = <900000>; |
| 158 |
regulator-max-microvolt = <1100000>; |
| 159 |
}; |
| 160 |
|
| 161 |
pm8950_l2: l2 { |
| 162 |
regulator-min-microvolt = <1200000>; |
| 163 |
regulator-max-microvolt = <1200000>; |
| 164 |
}; |
| 165 |
|
| 166 |
pm8950_l3: l3 { |
| 167 |
regulator-min-microvolt = <1000000>; |
| 168 |
regulator-max-microvolt = <1200000>; |
| 169 |
}; |
| 170 |
|
| 171 |
pm8950_l5: l5 { |
| 172 |
regulator-min-microvolt = <1800000>; |
| 173 |
regulator-max-microvolt = <1800000>; |
| 174 |
regulator-system-load = <290000>; |
| 175 |
regulator-allow-set-load; |
| 176 |
}; |
| 177 |
|
| 178 |
pm8950_l6: l6 { |
| 179 |
regulator-min-microvolt = <1800000>; |
| 180 |
regulator-max-microvolt = <1800000>; |
| 181 |
}; |
| 182 |
|
| 183 |
pm8950_l7: l7 { |
| 184 |
regulator-min-microvolt = <1800000>; |
| 185 |
regulator-max-microvolt = <1800000>; |
| 186 |
}; |
| 187 |
|
| 188 |
pm8950_l8: l8 { |
| 189 |
regulator-min-microvolt = <2900000>; |
| 190 |
regulator-max-microvolt = <2900000>; |
| 191 |
regulator-system-load = <130000>; |
| 192 |
regulator-allow-set-load; |
| 193 |
}; |
| 194 |
|
| 195 |
pm8950_l9: l9 { |
| 196 |
regulator-min-microvolt = <2000000>; |
| 197 |
regulator-max-microvolt = <2400000>; |
| 198 |
}; |
| 199 |
|
| 200 |
pm8950_l10: l10 { |
| 201 |
regulator-min-microvolt = <2500000>; |
| 202 |
regulator-max-microvolt = <2900000>; |
| 203 |
}; |
| 204 |
|
| 205 |
pm8950_l11: l11 { |
| 206 |
regulator-min-microvolt = <2950000>; |
| 207 |
regulator-max-microvolt = <2950000>; |
| 208 |
regulator-system-load = <60000>; |
| 209 |
regulator-allow-set-load; |
| 210 |
}; |
| 211 |
|
| 212 |
pm8950_l12: l12 { |
| 213 |
regulator-min-microvolt = <1800000>; |
| 214 |
regulator-max-microvolt = <2950000>; |
| 215 |
regulator-system-load = <100000>; |
| 216 |
regulator-allow-set-load; |
| 217 |
}; |
| 218 |
|
| 219 |
pm8950_l13: l13 { |
| 220 |
regulator-min-microvolt = <3075000>; |
| 221 |
regulator-max-microvolt = <3075000>; |
| 222 |
}; |
| 223 |
|
| 224 |
pm8950_l14: l14 { |
| 225 |
regulator-min-microvolt = <1800000>; |
| 226 |
regulator-max-microvolt = <3300000>; |
| 227 |
}; |
| 228 |
|
| 229 |
pm8950_l15: l15 { |
| 230 |
regulator-min-microvolt = <1800000>; |
| 231 |
regulator-max-microvolt = <3300000>; |
| 232 |
}; |
| 233 |
|
| 234 |
pm8950_l16: l16 { |
| 235 |
regulator-min-microvolt = <1800000>; |
| 236 |
regulator-max-microvolt = <1800000>; |
| 237 |
}; |
| 238 |
|
| 239 |
pm8950_l17: l17 { |
| 240 |
regulator-min-microvolt = <2500000>; |
| 241 |
regulator-max-microvolt = <2900000>; |
| 242 |
}; |
| 243 |
|
| 244 |
pm8950_l22: l22 { |
| 245 |
regulator-min-microvolt = <3000000>; |
| 246 |
regulator-max-microvolt = <3000000>; |
| 247 |
}; |
| 248 |
|
| 249 |
pm8950_l23: l23 { |
| 250 |
regulator-min-microvolt = <1200000>; |
| 251 |
regulator-max-microvolt = <1200000>; |
| 252 |
}; |
| 253 |
}; |
| 254 |
}; |
| 255 |
|
| 256 |
&sdhc_1 { |
| 257 |
/* Toshiba THGBMHG8C4LBAU7 (032G34) */ |
| 258 |
bus-width = <8>; |
| 259 |
non-removable; |
| 260 |
vmmc-supply = <&pm8950_l8>; |
| 261 |
vqmmc-supply = <&pm8950_l5>; |
| 262 |
status = "okay"; |
| 263 |
}; |
| 264 |
|
| 265 |
&sdhc_2 { |
| 266 |
bus-width = <4>; |
| 267 |
cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; |
| 268 |
vmmc-supply = <&pm8950_l11>; |
| 269 |
vqmmc-supply = <&pm8950_l12>; |
| 270 |
status = "okay"; |
| 271 |
}; |
| 272 |
|
| 273 |
&tlmm { |
| 274 |
gpio-reserved-ranges = <0 4>; |
| 275 |
}; |
| 276 |
|
| 277 |
&usb_hs_phy { |
| 278 |
vdd-supply = <&usbphy_1p2>; |
| 279 |
vdda1p8-supply = <&pm8950_l7>; |
| 280 |
vdda3p3-supply = <&pm8950_l13>; |
| 281 |
status = "okay"; |
| 282 |
}; |
| 283 |
|
| 284 |
&xo_board { |
| 285 |
clock-frequency = <19200000>; |
| 286 |
}; |