| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include "msm8939-pm8916.dtsi" |
| 6 |
#include <dt-bindings/gpio/gpio.h> |
| 7 |
|
| 8 |
/ { |
| 9 |
model = "Huawei Honor 5X / GR5 (2016)"; |
| 10 |
compatible = "huawei,kiwi", "qcom,msm8939"; |
| 11 |
chassis-type = "handset"; |
| 12 |
|
| 13 |
aliases { |
| 14 |
mmc0 = &sdhc_1; /* SDC1 eMMC slot */ |
| 15 |
mmc1 = &sdhc_2; /* SDC2 SD card slot */ |
| 16 |
serial0 = &blsp_uart2; |
| 17 |
}; |
| 18 |
|
| 19 |
chosen { |
| 20 |
stdout-path = "serial0"; |
| 21 |
}; |
| 22 |
|
| 23 |
reserved-memory { |
| 24 |
qseecom_mem: qseecom@84a00000 { |
| 25 |
reg = <0x0 0x84a00000 0x0 0x1600000>; |
| 26 |
no-map; |
| 27 |
}; |
| 28 |
}; |
| 29 |
|
| 30 |
gpio-hall-sensor { |
| 31 |
compatible = "gpio-keys"; |
| 32 |
|
| 33 |
pinctrl-0 = <&gpio_hall_sensor_default>; |
| 34 |
pinctrl-names = "default"; |
| 35 |
|
| 36 |
label = "GPIO Hall Effect Sensor"; |
| 37 |
|
| 38 |
event-hall-sensor { |
| 39 |
label = "Hall Effect Sensor"; |
| 40 |
gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; |
| 41 |
linux,input-type = <EV_SW>; |
| 42 |
linux,code = <SW_LID>; |
| 43 |
linux,can-disable; |
| 44 |
}; |
| 45 |
}; |
| 46 |
|
| 47 |
gpio-keys { |
| 48 |
compatible = "gpio-keys"; |
| 49 |
|
| 50 |
pinctrl-0 = <&gpio_keys_default>; |
| 51 |
pinctrl-names = "default"; |
| 52 |
|
| 53 |
label = "GPIO Buttons"; |
| 54 |
|
| 55 |
button-volume-up { |
| 56 |
label = "Volume Up"; |
| 57 |
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; |
| 58 |
linux,code = <KEY_VOLUMEUP>; |
| 59 |
}; |
| 60 |
}; |
| 61 |
|
| 62 |
usb_id: usb-id { |
| 63 |
compatible = "linux,extcon-usb-gpio"; |
| 64 |
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; |
| 65 |
pinctrl-0 = <&usb_id_default>; |
| 66 |
pinctrl-names = "default"; |
| 67 |
}; |
| 68 |
}; |
| 69 |
|
| 70 |
&blsp_i2c2 { |
| 71 |
status = "okay"; |
| 72 |
|
| 73 |
accelerometer@1e { |
| 74 |
compatible = "kionix,kx023-1025"; |
| 75 |
reg = <0x1e>; |
| 76 |
|
| 77 |
vdd-supply = <&pm8916_l17>; |
| 78 |
vddio-supply = <&pm8916_l6>; |
| 79 |
pinctrl-0 = <&accel_int_default>; |
| 80 |
pinctrl-names = "default"; |
| 81 |
mount-matrix = "-1", "0", "0", |
| 82 |
"0", "1", "0", |
| 83 |
"0", "0", "1"; |
| 84 |
}; |
| 85 |
|
| 86 |
proximity@39 { |
| 87 |
compatible = "avago,apds9930"; |
| 88 |
reg = <0x39>; |
| 89 |
|
| 90 |
interrupt-parent = <&tlmm>; |
| 91 |
interrupts = <113 IRQ_TYPE_EDGE_FALLING>; |
| 92 |
|
| 93 |
vdd-supply = <&pm8916_l17>; |
| 94 |
vddio-supply = <&pm8916_l6>; |
| 95 |
|
| 96 |
led-max-microamp = <25000>; |
| 97 |
amstaos,proximity-diodes = <0>; |
| 98 |
|
| 99 |
pinctrl-0 = <&prox_irq_default>; |
| 100 |
pinctrl-names = "default"; |
| 101 |
}; |
| 102 |
}; |
| 103 |
|
| 104 |
&blsp_i2c5 { |
| 105 |
status = "okay"; |
| 106 |
|
| 107 |
touchscreen@1c { |
| 108 |
compatible = "cypress,tt21000"; |
| 109 |
|
| 110 |
reg = <0x1c>; |
| 111 |
interrupt-parent = <&tlmm>; |
| 112 |
interrupts = <13 IRQ_TYPE_EDGE_FALLING>; |
| 113 |
|
| 114 |
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; |
| 115 |
|
| 116 |
/* |
| 117 |
* NOTE: vdd is not directly supplied by pm8916_l16, it seems to be a |
| 118 |
* fixed regulator that is automatically enabled by pm8916_l16. |
| 119 |
*/ |
| 120 |
vdd-supply = <&pm8916_l16>; |
| 121 |
vddio-supply = <&pm8916_l16>; |
| 122 |
|
| 123 |
pinctrl-0 = <&touchscreen_default>; |
| 124 |
pinctrl-names = "default"; |
| 125 |
}; |
| 126 |
}; |
| 127 |
|
| 128 |
&blsp_uart2 { |
| 129 |
pinctrl-0 = <&blsp_uart2_console_default>; |
| 130 |
pinctrl-1 = <&blsp_uart2_console_sleep>; |
| 131 |
pinctrl-names = "default", "sleep"; |
| 132 |
status = "okay"; |
| 133 |
}; |
| 134 |
|
| 135 |
&pm8916_l8 { |
| 136 |
regulator-min-microvolt = <2950000>; |
| 137 |
regulator-max-microvolt = <2950000>; |
| 138 |
}; |
| 139 |
|
| 140 |
&pm8916_resin { |
| 141 |
linux,code = <KEY_VOLUMEDOWN>; |
| 142 |
status = "okay"; |
| 143 |
}; |
| 144 |
|
| 145 |
&pm8916_rpm_regulators { |
| 146 |
pm8916_l16: l16 { |
| 147 |
regulator-min-microvolt = <1800000>; |
| 148 |
regulator-max-microvolt = <1800000>; |
| 149 |
}; |
| 150 |
|
| 151 |
pm8916_l17: l17 { |
| 152 |
regulator-min-microvolt = <2850000>; |
| 153 |
regulator-max-microvolt = <2850000>; |
| 154 |
}; |
| 155 |
}; |
| 156 |
|
| 157 |
&pm8916_vib { |
| 158 |
status = "okay"; |
| 159 |
}; |
| 160 |
|
| 161 |
&sdhc_1 { |
| 162 |
status = "okay"; |
| 163 |
}; |
| 164 |
|
| 165 |
&sdhc_2 { |
| 166 |
pinctrl-0 = <&sdc2_default &sdc2_cd_default>; |
| 167 |
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; |
| 168 |
pinctrl-names = "default", "sleep"; |
| 169 |
|
| 170 |
cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; |
| 171 |
|
| 172 |
status = "okay"; |
| 173 |
}; |
| 174 |
|
| 175 |
&usb { |
| 176 |
extcon = <&usb_id>, <&usb_id>; |
| 177 |
status = "okay"; |
| 178 |
}; |
| 179 |
|
| 180 |
&usb_hs_phy { |
| 181 |
extcon = <&usb_id>; |
| 182 |
}; |
| 183 |
|
| 184 |
&wcnss { |
| 185 |
status = "okay"; |
| 186 |
}; |
| 187 |
|
| 188 |
&wcnss_iris { |
| 189 |
compatible = "qcom,wcn3620"; |
| 190 |
}; |
| 191 |
|
| 192 |
&wcnss_mem { |
| 193 |
status = "okay"; |
| 194 |
}; |
| 195 |
|
| 196 |
&tlmm { |
| 197 |
accel_int_default: accel-int-default-state { |
| 198 |
pins = "gpio115"; |
| 199 |
function = "gpio"; |
| 200 |
drive-strength = <2>; |
| 201 |
bias-disable; |
| 202 |
}; |
| 203 |
|
| 204 |
gpio_hall_sensor_default: gpio-hall-sensor-default-state { |
| 205 |
pins = "gpio69"; |
| 206 |
function = "gpio"; |
| 207 |
drive-strength = <2>; |
| 208 |
bias-disable; |
| 209 |
}; |
| 210 |
|
| 211 |
gpio_keys_default: gpio-keys-default-state { |
| 212 |
pins = "gpio107"; |
| 213 |
function = "gpio"; |
| 214 |
drive-strength = <2>; |
| 215 |
bias-pull-up; |
| 216 |
}; |
| 217 |
|
| 218 |
prox_irq_default: prox-irq-default-state { |
| 219 |
pins = "gpio113"; |
| 220 |
function = "gpio"; |
| 221 |
drive-strength = <2>; |
| 222 |
bias-disable; |
| 223 |
}; |
| 224 |
|
| 225 |
sdc2_cd_default: sdc2-cd-default-state { |
| 226 |
pins = "gpio38"; |
| 227 |
function = "gpio"; |
| 228 |
drive-strength = <2>; |
| 229 |
bias-disable; |
| 230 |
}; |
| 231 |
|
| 232 |
touchscreen_default: touchscreen-default-state { |
| 233 |
pins = "gpio12", "gpio13"; |
| 234 |
function = "gpio"; |
| 235 |
drive-strength = <2>; |
| 236 |
bias-disable; |
| 237 |
}; |
| 238 |
|
| 239 |
usb_id_default: usb-id-default-state { |
| 240 |
pins = "gpio110"; |
| 241 |
function = "gpio"; |
| 242 |
drive-strength = <8>; |
| 243 |
bias-pull-up; |
| 244 |
}; |
| 245 |
}; |