Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/msm8939-asus-z00t.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-only
2
3 /dts-v1/;
4
5 #include "msm8939-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi"
7
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/interrupt-controller/irq.h>
11
12 / {
13 model = "Asus ZenFone 2 Laser/Selfie (1080p)";
14 compatible = "asus,z00t", "qcom,msm8939";
15 chassis-type = "handset";
16
17 aliases {
18 mmc0 = &sdhc_1;
19 mmc1 = &sdhc_2;
20 serial0 = &blsp_uart2;
21 };
22
23 battery: battery {
24 compatible = "simple-battery";
25 device-chemistry = "lithium-ion-polymer";
26 voltage-min-design-microvolt = <3400000>;
27 voltage-max-design-microvolt = <4400000>;
28 energy-full-design-microwatt-hours = <11500000>;
29 charge-full-design-microamp-hours = <3000000>;
30
31 ocv-capacity-celsius = <(-20) 0 25 40 60>;
32 ocv-capacity-table-0 = <4378000 100>, <4220000 95>, <4125000 90>,
33 <4071000 85>, <3977000 80>, <3916000 75>, <3866000 70>,
34 <3838000 65>, <3822000 60>, <3809000 55>, <3797000 50>,
35 <3784000 45>, <3771000 40>, <3757000 35>, <3743000 30>,
36 <3726000 25>, <3707000 20>, <3688000 16>, <3670000 13>,
37 <3655000 11>, <3648000 10>, <3636000 9>, <3624000 8>,
38 <3612000 7>, <3592000 6>, <3569000 5>, <3540000 4>,
39 <3494000 3>, <3418000 2>, <3289000 1>, <3000000 0>;
40
41 ocv-capacity-table-1 = <4378000 100>, <4292000 95>, <4226000 90>,
42 <4166000 85>, <4109000 80>, <4064000 75>, <3992000 70>,
43 <3942000 65>, <3898000 60>, <3859000 55>, <3826000 50>,
44 <3802000 45>, <3788000 40>, <3779000 35>, <3768000 30>,
45 <3752000 25>, <3732000 20>, <3712000 16>, <3696000 13>,
46 <3688000 11>, <3684000 10>, <3680000 9>, <3675000 8>,
47 <3669000 7>, <3658000 6>, <3636000 5>, <3599000 4>,
48 <3544000 3>, <3466000 2>, <3341000 1>, <3000000 0>;
49
50 ocv-capacity-table-2 = <4372000 100>, <4306000 95>, <4247000 90>,
51 <4190000 85>, <4134000 80>, <4081000 75>, <4030000 70>,
52 <3984000 65>, <3930000 60>, <3884000 55>, <3850000 50>,
53 <3826000 45>, <3804000 40>, <3786000 35>, <3770000 30>,
54 <3753000 25>, <3734000 20>, <3712000 16>, <3693000 13>,
55 <3686000 11>, <3684000 10>, <3682000 9>, <3680000 8>,
56 <3676000 7>, <3668000 6>, <3643000 5>, <3600000 4>,
57 <3542000 3>, <3462000 2>, <3340000 1>, <3000000 0>;
58
59 ocv-capacity-table-3 = <4365000 100>, <4304000 95>, <4246000 90>,
60 <4189000 85>, <4133000 80>, <4080000 75>, <4030000 70>,
61 <3985000 65>, <3933000 60>, <3886000 55>, <3852000 50>,
62 <3827000 45>, <3806000 40>, <3789000 35>, <3769000 30>,
63 <3746000 25>, <3726000 20>, <3706000 16>, <3688000 13>,
64 <3681000 11>, <3678000 10>, <3676000 9>, <3676000 8>,
65 <3672000 7>, <3660000 6>, <3634000 5>, <3588000 4>,
66 <3528000 3>, <3448000 2>, <3322000 1>, <3000000 0>;
67
68 ocv-capacity-table-4 = <4358000 100>, <4298000 95>, <4240000 90>,
69 <4183000 85>, <4128000 80>, <4076000 75>, <4027000 70>,
70 <3983000 65>, <3935000 60>, <3887000 55>, <3852000 50>,
71 <3827000 45>, <3806000 40>, <3789000 35>, <3764000 30>,
72 <3738000 25>, <3715000 20>, <3695000 16>, <3677000 13>,
73 <3672000 11>, <3669000 10>, <3667000 9>, <3666000 8>,
74 <3662000 7>, <3652000 6>, <3622000 5>, <3577000 4>,
75 <3518000 3>, <3440000 2>, <3321000 1>, <3000000 0>;
76 };
77
78 chosen {
79 stdout-path = "serial0";
80 };
81
82 gpio-keys {
83 compatible = "gpio-keys";
84
85 pinctrl-0 = <&gpio_hall_sensor_default>, <&gpio_keys_default>;
86 pinctrl-names = "default";
87
88 button-volume-up {
89 label = "Volume Up";
90 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
91 linux,code = <KEY_VOLUMEUP>;
92 debounce-interval = <15>;
93 };
94
95 button-volume-down {
96 label = "Volume Down";
97 gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
98 linux,code = <KEY_VOLUMEDOWN>;
99 debounce-interval = <15>;
100 };
101
102 event-hall-sensor {
103 label = "Hall Effect Sensor";
104 gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
105 linux,input-type = <EV_SW>;
106 linux,code = <SW_LID>;
107 linux,can-disable;
108 debounce-interval = <150>;
109 };
110 };
111
112 reg_sd_vmmc: regulator-sdcard-vmmc {
113 compatible = "regulator-fixed";
114 regulator-name = "sdcard-vmmc";
115 regulator-min-microvolt = <2950000>;
116 regulator-max-microvolt = <2950000>;
117
118 gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
119 enable-active-high;
120
121 startup-delay-us = <200>;
122
123 pinctrl-0 = <&sd_vmmc_en_default>;
124 pinctrl-names = "default";
125 };
126
127 usb_id: usb-id {
128 compatible = "linux,extcon-usb-gpio";
129 id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
130 pinctrl-0 = <&usb_id_default>;
131 pinctrl-names = "default";
132 };
133 };
134
135 &blsp_i2c2 {
136 status = "okay";
137
138 magnetometer@c {
139 compatible = "asahi-kasei,ak09911";
140 reg = <0x0c>;
141
142 vdd-supply = <&pm8916_l8>;
143 vid-supply = <&pm8916_l6>;
144
145 reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>;
146 pinctrl-0 = <&mag_reset_default>;
147 pinctrl-names = "default";
148 };
149
150 imu@68 {
151 compatible = "invensense,mpu6515";
152 reg = <0x68>;
153
154 interrupts-extended = <&tlmm 36 IRQ_TYPE_EDGE_RISING>;
155
156 vdd-supply = <&pm8916_l8>;
157 vddio-supply = <&pm8916_l6>;
158
159 pinctrl-0 = <&imu_default>;
160 pinctrl-names = "default";
161
162 mount-matrix = "0", "1", "0",
163 "-1", "0", "0",
164 "0", "0", "1";
165 };
166 };
167
168 &blsp_i2c5 {
169 status = "okay";
170
171 touchscreen@38 {
172 compatible = "edt,edt-ft5306";
173 reg = <0x38>;
174
175 interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
176
177 reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
178
179 vcc-supply = <&pm8916_l8>;
180 iovcc-supply = <&pm8916_l6>;
181
182 touchscreen-size-x = <1080>;
183 touchscreen-size-y = <1920>;
184
185 pinctrl-0 = <&touchscreen_default>;
186 pinctrl-names = "default";
187 };
188 };
189
190 &blsp_uart2 {
191 pinctrl-0 = <&blsp_uart2_console_default>;
192 pinctrl-1 = <&blsp_uart2_console_sleep>;
193 pinctrl-names = "default", "sleep";
194
195 status = "okay";
196 };
197
198 &mpss_mem {
199 reg = <0x0 0x86800000 0x0 0x5500000>;
200 };
201
202 &pm8916_bms {
203 monitored-battery = <&battery>;
204
205 status = "okay";
206 };
207
208 &pm8916_codec {
209 qcom,micbias-lvl = <2800>;
210 qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
211 qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
212 qcom,micbias1-ext-cap;
213 qcom,hphl-jack-type-normally-open;
214
215 status = "okay";
216 };
217
218 &pm8916_vib {
219 status = "okay";
220 };
221
222 &sdhc_1 {
223 status = "okay";
224 };
225
226 &sdhc_2 {
227 vmmc-supply = <&reg_sd_vmmc>;
228
229 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
230 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
231 pinctrl-names = "default", "sleep";
232 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
233
234 status = "okay";
235 };
236
237 &sound {
238 audio-routing =
239 "AMIC1", "MIC BIAS External1",
240 "AMIC2", "MIC BIAS Internal2",
241 "AMIC3", "MIC BIAS External1";
242
243 status = "okay";
244 };
245
246 &usb {
247 extcon = <&usb_id>, <&usb_id>;
248
249 status = "okay";
250 };
251
252 &usb_hs_phy {
253 extcon = <&usb_id>;
254 };
255
256 &wcnss {
257 status = "okay";
258 };
259
260 &wcnss_iris {
261 compatible = "qcom,wcn3660b";
262 };
263
264 &wcnss_mem {
265 status = "okay";
266 };
267
268 &tlmm {
269 touchscreen_default: touchscreen-default-state {
270 reset-pins {
271 pins = "gpio12";
272 function = "gpio";
273 drive-strength = <2>;
274 bias-disable;
275 };
276
277 touch-pins {
278 pins = "gpio13";
279 function = "gpio";
280 drive-strength = <2>;
281 bias-pull-up;
282 };
283 };
284
285 imu_default: imu-default-state {
286 pins = "gpio36";
287 function = "gpio";
288 drive-strength = <2>;
289 bias-disable;
290 };
291
292 sdc2_cd_default: sdc2-cd-default-state {
293 pins = "gpio38";
294 function = "gpio";
295 drive-strength = <2>;
296 bias-disable;
297 };
298
299 sd_vmmc_en_default: sd-vmmc-en-default-state {
300 pins = "gpio87";
301 function = "gpio";
302 drive-strength = <2>;
303 bias-disable;
304 };
305
306 gpio_keys_default: gpio-keys-default-state {
307 pins = "gpio107", "gpio117";
308 function = "gpio";
309 drive-strength = <2>;
310 bias-pull-up;
311 };
312
313 gpio_hall_sensor_default: gpio-hall-sensor-default-state {
314 pins = "gpio108";
315 function = "gpio";
316 drive-strength = <2>;
317 bias-pull-up;
318 };
319
320 usb_id_default: usb-id-default-state {
321 pins = "gpio110";
322 function = "gpio";
323 drive-strength = <8>;
324 bias-pull-up;
325 };
326
327 mag_reset_default: mag-reset-default-state {
328 pins = "gpio112";
329 function = "gpio";
330 drive-strength = <2>;
331 bias-disable;
332 };
333 };