| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2023, Dang Huynh <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> |
| 7 |
#include <dt-bindings/clock/qcom,gcc-msm8917.h> |
| 8 |
#include <dt-bindings/clock/qcom,rpmcc.h> |
| 9 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 10 |
#include <dt-bindings/power/qcom-rpmpd.h> |
| 11 |
#include <dt-bindings/thermal/thermal.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
interrupt-parent = <&intc>; |
| 15 |
|
| 16 |
#address-cells = <2>; |
| 17 |
#size-cells = <2>; |
| 18 |
|
| 19 |
clocks { |
| 20 |
xo_board: xo-board { |
| 21 |
compatible = "fixed-clock"; |
| 22 |
#clock-cells = <0>; |
| 23 |
}; |
| 24 |
|
| 25 |
sleep_clk: sleep-clk { |
| 26 |
compatible = "fixed-clock"; |
| 27 |
#clock-cells = <0>; |
| 28 |
}; |
| 29 |
}; |
| 30 |
|
| 31 |
cpus { |
| 32 |
#address-cells = <1>; |
| 33 |
#size-cells = <0>; |
| 34 |
|
| 35 |
cpu0: cpu@0 { |
| 36 |
compatible = "arm,cortex-a53"; |
| 37 |
reg = <0x0>; |
| 38 |
device_type = "cpu"; |
| 39 |
enable-method = "psci"; |
| 40 |
operating-points-v2 = <&cpu_opp_table_c0>; |
| 41 |
next-level-cache = <&l2_0>; |
| 42 |
#cooling-cells = <2>; |
| 43 |
|
| 44 |
l2_0: l2-cache { |
| 45 |
compatible = "cache"; |
| 46 |
cache-level = <2>; |
| 47 |
cache-size = <0x80000>; |
| 48 |
cache-unified; |
| 49 |
}; |
| 50 |
}; |
| 51 |
|
| 52 |
cpu1: cpu@1 { |
| 53 |
compatible = "arm,cortex-a53"; |
| 54 |
reg = <0x1>; |
| 55 |
device_type = "cpu"; |
| 56 |
enable-method = "psci"; |
| 57 |
operating-points-v2 = <&cpu_opp_table_c0>; |
| 58 |
next-level-cache = <&l2_0>; |
| 59 |
#cooling-cells = <2>; |
| 60 |
}; |
| 61 |
|
| 62 |
cpu2: cpu@2 { |
| 63 |
compatible = "arm,cortex-a53"; |
| 64 |
reg = <0x2>; |
| 65 |
device_type = "cpu"; |
| 66 |
enable-method = "psci"; |
| 67 |
operating-points-v2 = <&cpu_opp_table_c0>; |
| 68 |
next-level-cache = <&l2_0>; |
| 69 |
#cooling-cells = <2>; |
| 70 |
}; |
| 71 |
|
| 72 |
cpu3: cpu@3 { |
| 73 |
compatible = "arm,cortex-a53"; |
| 74 |
reg = <0x3>; |
| 75 |
device_type = "cpu"; |
| 76 |
enable-method = "psci"; |
| 77 |
operating-points-v2 = <&cpu_opp_table_c0>; |
| 78 |
next-level-cache = <&l2_0>; |
| 79 |
#cooling-cells = <2>; |
| 80 |
}; |
| 81 |
|
| 82 |
cpu4: cpu@100 { |
| 83 |
compatible = "arm,cortex-a53"; |
| 84 |
reg = <0x100>; |
| 85 |
device_type = "cpu"; |
| 86 |
next-level-cache = <&l2_1>; |
| 87 |
enable-method = "psci"; |
| 88 |
operating-points-v2 = <&cpu_opp_table_c1>; |
| 89 |
#cooling-cells = <2>; |
| 90 |
|
| 91 |
l2_1: l2-cache { |
| 92 |
compatible = "cache"; |
| 93 |
cache-level = <2>; |
| 94 |
cache-size = <0x100000>; |
| 95 |
cache-unified; |
| 96 |
}; |
| 97 |
}; |
| 98 |
|
| 99 |
cpu5: cpu@101 { |
| 100 |
compatible = "arm,cortex-a53"; |
| 101 |
reg = <0x101>; |
| 102 |
device_type = "cpu"; |
| 103 |
next-level-cache = <&l2_1>; |
| 104 |
enable-method = "psci"; |
| 105 |
operating-points-v2 = <&cpu_opp_table_c1>; |
| 106 |
#cooling-cells = <2>; |
| 107 |
}; |
| 108 |
|
| 109 |
cpu6: cpu@102 { |
| 110 |
compatible = "arm,cortex-a53"; |
| 111 |
reg = <0x102>; |
| 112 |
device_type = "cpu"; |
| 113 |
next-level-cache = <&l2_1>; |
| 114 |
enable-method = "psci"; |
| 115 |
operating-points-v2 = <&cpu_opp_table_c1>; |
| 116 |
#cooling-cells = <2>; |
| 117 |
}; |
| 118 |
|
| 119 |
cpu7: cpu@103 { |
| 120 |
compatible = "arm,cortex-a53"; |
| 121 |
reg = <0x103>; |
| 122 |
device_type = "cpu"; |
| 123 |
next-level-cache = <&l2_1>; |
| 124 |
enable-method = "psci"; |
| 125 |
operating-points-v2 = <&cpu_opp_table_c1>; |
| 126 |
#cooling-cells = <2>; |
| 127 |
}; |
| 128 |
|
| 129 |
cpu-map { |
| 130 |
/* Little Cores */ |
| 131 |
cluster0 { |
| 132 |
core0 { |
| 133 |
cpu = <&cpu0>; |
| 134 |
}; |
| 135 |
|
| 136 |
core1 { |
| 137 |
cpu = <&cpu1>; |
| 138 |
}; |
| 139 |
|
| 140 |
core2 { |
| 141 |
cpu = <&cpu2>; |
| 142 |
}; |
| 143 |
|
| 144 |
core3 { |
| 145 |
cpu = <&cpu3>; |
| 146 |
}; |
| 147 |
}; |
| 148 |
|
| 149 |
/* Big Cores */ |
| 150 |
cluster1 { |
| 151 |
core0 { |
| 152 |
cpu = <&cpu4>; |
| 153 |
}; |
| 154 |
|
| 155 |
core1 { |
| 156 |
cpu = <&cpu5>; |
| 157 |
}; |
| 158 |
|
| 159 |
core2 { |
| 160 |
cpu = <&cpu6>; |
| 161 |
}; |
| 162 |
|
| 163 |
core3 { |
| 164 |
cpu = <&cpu7>; |
| 165 |
}; |
| 166 |
}; |
| 167 |
}; |
| 168 |
}; |
| 169 |
|
| 170 |
firmware { |
| 171 |
scm: scm { |
| 172 |
compatible = "qcom,scm-msm8937", "qcom,scm"; |
| 173 |
clocks = <&gcc GCC_CRYPTO_CLK>, |
| 174 |
<&gcc GCC_CRYPTO_AXI_CLK>, |
| 175 |
<&gcc GCC_CRYPTO_AHB_CLK>; |
| 176 |
clock-names = "core", |
| 177 |
"bus", |
| 178 |
"iface"; |
| 179 |
#reset-cells = <1>; |
| 180 |
|
| 181 |
qcom,dload-mode = <&tcsr 0x6100>; |
| 182 |
}; |
| 183 |
}; |
| 184 |
|
| 185 |
memory@80000000 { |
| 186 |
/* We expect the bootloader to fill in the reg */ |
| 187 |
reg = <0 0x80000000 0 0>; |
| 188 |
device_type = "memory"; |
| 189 |
}; |
| 190 |
|
| 191 |
reserved-memory { |
| 192 |
ranges; |
| 193 |
#address-cells = <2>; |
| 194 |
#size-cells = <2>; |
| 195 |
|
| 196 |
qseecom_mem: reserved@85b00000 { |
| 197 |
reg = <0x0 0x85b00000 0x0 0x800000>; |
| 198 |
no-map; |
| 199 |
}; |
| 200 |
|
| 201 |
smem@86300000 { |
| 202 |
compatible = "qcom,smem"; |
| 203 |
reg = <0x0 0x86300000 0x0 0x100000>; |
| 204 |
no-map; |
| 205 |
|
| 206 |
hwlocks = <&tcsr_mutex 3>; |
| 207 |
qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| 208 |
}; |
| 209 |
|
| 210 |
reserved@86400000 { |
| 211 |
reg = <0x0 0x86400000 0x0 0x400000>; |
| 212 |
no-map; |
| 213 |
}; |
| 214 |
|
| 215 |
rmtfs@92100000 { |
| 216 |
compatible = "qcom,rmtfs-mem"; |
| 217 |
reg = <0x0 0x92100000 0x0 0x180000>; |
| 218 |
no-map; |
| 219 |
|
| 220 |
qcom,client-id = <1>; |
| 221 |
}; |
| 222 |
|
| 223 |
adsp_mem: adsp { |
| 224 |
size = <0x0 0x1100000>; |
| 225 |
alignment = <0x0 0x100000>; |
| 226 |
alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; |
| 227 |
no-map; |
| 228 |
status = "disabled"; |
| 229 |
}; |
| 230 |
|
| 231 |
mba_mem: mba { |
| 232 |
size = <0x0 0x100000>; |
| 233 |
alignment = <0x0 0x100000>; |
| 234 |
alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; |
| 235 |
no-map; |
| 236 |
status = "disabled"; |
| 237 |
}; |
| 238 |
|
| 239 |
wcnss_mem: wcnss { |
| 240 |
size = <0x0 0x700000>; |
| 241 |
alignment = <0x0 0x100000>; |
| 242 |
alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; |
| 243 |
no-map; |
| 244 |
status = "disabled"; |
| 245 |
}; |
| 246 |
|
| 247 |
venus_mem: venus { |
| 248 |
size = <0x0 0x400000>; |
| 249 |
alignment = <0x0 0x100000>; |
| 250 |
alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; |
| 251 |
no-map; |
| 252 |
status = "disabled"; |
| 253 |
}; |
| 254 |
}; |
| 255 |
|
| 256 |
cpu_opp_table_c0: opp-table-c0 { |
| 257 |
compatible = "operating-points-v2"; |
| 258 |
opp-shared; |
| 259 |
|
| 260 |
opp-768000000 { |
| 261 |
opp-hz = /bits/ 64 <768000000>; |
| 262 |
}; |
| 263 |
|
| 264 |
opp-902400000 { |
| 265 |
opp-hz = /bits/ 64 <902400000>; |
| 266 |
}; |
| 267 |
|
| 268 |
opp-998400000 { |
| 269 |
opp-hz = /bits/ 64 <998400000>; |
| 270 |
}; |
| 271 |
|
| 272 |
opp-1094400000 { |
| 273 |
opp-hz = /bits/ 64 <1094400000>; |
| 274 |
}; |
| 275 |
}; |
| 276 |
|
| 277 |
cpu_opp_table_c1: opp-table-c1 { |
| 278 |
compatible = "operating-points-v2"; |
| 279 |
opp-shared; |
| 280 |
|
| 281 |
opp-960000000 { |
| 282 |
opp-hz = /bits/ 64 <960000000>; |
| 283 |
}; |
| 284 |
|
| 285 |
opp-1094400000 { |
| 286 |
opp-hz = /bits/ 64 <1094400000>; |
| 287 |
}; |
| 288 |
|
| 289 |
opp-1209600000 { |
| 290 |
opp-hz = /bits/ 64 <1209600000>; |
| 291 |
}; |
| 292 |
|
| 293 |
opp-1248000000 { |
| 294 |
opp-hz = /bits/ 64 <1248000000>; |
| 295 |
}; |
| 296 |
|
| 297 |
opp-1344000000 { |
| 298 |
opp-hz = /bits/ 64 <1344000000>; |
| 299 |
}; |
| 300 |
|
| 301 |
opp-1401600000 { |
| 302 |
opp-hz = /bits/ 64 <1401600000>; |
| 303 |
}; |
| 304 |
}; |
| 305 |
|
| 306 |
pmu { |
| 307 |
compatible = "arm,cortex-a53-pmu"; |
| 308 |
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; |
| 309 |
}; |
| 310 |
|
| 311 |
psci { |
| 312 |
compatible = "arm,psci-1.0"; |
| 313 |
method = "smc"; |
| 314 |
}; |
| 315 |
|
| 316 |
rpm: remoteproc { |
| 317 |
compatible = "qcom,msm8937-rpm-proc", "qcom,rpm-proc"; |
| 318 |
|
| 319 |
smd-edge { |
| 320 |
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; |
| 321 |
qcom,ipc = <&apcs1 8 0>; |
| 322 |
qcom,smd-edge = <15>; |
| 323 |
|
| 324 |
rpm_requests: rpm-requests { |
| 325 |
compatible = "qcom,rpm-msm8937", "qcom,smd-rpm"; |
| 326 |
qcom,smd-channels = "rpm_requests"; |
| 327 |
|
| 328 |
rpmcc: clock-controller { |
| 329 |
compatible = "qcom,rpmcc-msm8937", "qcom,rpmcc"; |
| 330 |
#clock-cells = <1>; |
| 331 |
clocks = <&xo_board>; |
| 332 |
clock-names = "xo"; |
| 333 |
}; |
| 334 |
|
| 335 |
rpmpd: power-controller { |
| 336 |
compatible = "qcom,msm8937-rpmpd", "qcom,msm8917-rpmpd"; |
| 337 |
#power-domain-cells = <1>; |
| 338 |
operating-points-v2 = <&rpmpd_opp_table>; |
| 339 |
|
| 340 |
rpmpd_opp_table: opp-table { |
| 341 |
compatible = "operating-points-v2"; |
| 342 |
|
| 343 |
rpmpd_opp_ret: opp1 { |
| 344 |
opp-level = <RPM_SMD_LEVEL_RETENTION>; |
| 345 |
}; |
| 346 |
|
| 347 |
rpmpd_opp_ret_plus: opp2 { |
| 348 |
opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>; |
| 349 |
}; |
| 350 |
|
| 351 |
rpmpd_opp_min_svs: opp3 { |
| 352 |
opp-level = <RPM_SMD_LEVEL_MIN_SVS>; |
| 353 |
}; |
| 354 |
|
| 355 |
rpmpd_opp_low_svs: opp4 { |
| 356 |
opp-level = <RPM_SMD_LEVEL_LOW_SVS>; |
| 357 |
}; |
| 358 |
|
| 359 |
rpmpd_opp_svs: opp5 { |
| 360 |
opp-level = <RPM_SMD_LEVEL_SVS>; |
| 361 |
}; |
| 362 |
|
| 363 |
rpmpd_opp_svs_plus: opp6 { |
| 364 |
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; |
| 365 |
}; |
| 366 |
|
| 367 |
rpmpd_opp_nom: opp7 { |
| 368 |
opp-level = <RPM_SMD_LEVEL_NOM>; |
| 369 |
}; |
| 370 |
|
| 371 |
rpmpd_opp_nom_plus: opp8 { |
| 372 |
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; |
| 373 |
}; |
| 374 |
|
| 375 |
rpmpd_opp_turbo: opp9 { |
| 376 |
opp-level = <RPM_SMD_LEVEL_TURBO>; |
| 377 |
}; |
| 378 |
}; |
| 379 |
}; |
| 380 |
}; |
| 381 |
}; |
| 382 |
}; |
| 383 |
|
| 384 |
smp2p-adsp { |
| 385 |
compatible = "qcom,smp2p"; |
| 386 |
qcom,smem = <443>, <429>; |
| 387 |
|
| 388 |
interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; |
| 389 |
|
| 390 |
mboxes = <&apcs1 10>; |
| 391 |
|
| 392 |
qcom,local-pid = <0>; |
| 393 |
qcom,remote-pid = <2>; |
| 394 |
|
| 395 |
adsp_smp2p_out: master-kernel { |
| 396 |
qcom,entry-name = "master-kernel"; |
| 397 |
|
| 398 |
#qcom,smem-state-cells = <1>; |
| 399 |
}; |
| 400 |
|
| 401 |
adsp_smp2p_in: slave-kernel { |
| 402 |
qcom,entry-name = "slave-kernel"; |
| 403 |
|
| 404 |
interrupt-controller; |
| 405 |
#interrupt-cells = <2>; |
| 406 |
}; |
| 407 |
}; |
| 408 |
|
| 409 |
smp2p-modem { |
| 410 |
compatible = "qcom,smp2p"; |
| 411 |
qcom,smem = <435>, <428>; |
| 412 |
|
| 413 |
interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; |
| 414 |
|
| 415 |
mboxes = <&apcs1 14>; |
| 416 |
|
| 417 |
qcom,local-pid = <0>; |
| 418 |
qcom,remote-pid = <1>; |
| 419 |
|
| 420 |
modem_smp2p_out: master-kernel { |
| 421 |
qcom,entry-name = "master-kernel"; |
| 422 |
|
| 423 |
#qcom,smem-state-cells = <1>; |
| 424 |
}; |
| 425 |
|
| 426 |
modem_smp2p_in: slave-kernel { |
| 427 |
qcom,entry-name = "slave-kernel"; |
| 428 |
|
| 429 |
interrupt-controller; |
| 430 |
#interrupt-cells = <2>; |
| 431 |
}; |
| 432 |
}; |
| 433 |
|
| 434 |
smp2p-wcnss { |
| 435 |
compatible = "qcom,smp2p"; |
| 436 |
qcom,smem = <451>, <431>; |
| 437 |
|
| 438 |
interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; |
| 439 |
|
| 440 |
mboxes = <&apcs1 18>; |
| 441 |
|
| 442 |
qcom,local-pid = <0>; |
| 443 |
qcom,remote-pid = <4>; |
| 444 |
|
| 445 |
wcnss_smp2p_out: master-kernel { |
| 446 |
qcom,entry-name = "master-kernel"; |
| 447 |
|
| 448 |
#qcom,smem-state-cells = <1>; |
| 449 |
}; |
| 450 |
|
| 451 |
wcnss_smp2p_in: slave-kernel { |
| 452 |
qcom,entry-name = "slave-kernel"; |
| 453 |
|
| 454 |
interrupt-controller; |
| 455 |
#interrupt-cells = <2>; |
| 456 |
}; |
| 457 |
}; |
| 458 |
|
| 459 |
smsm { |
| 460 |
compatible = "qcom,smsm"; |
| 461 |
|
| 462 |
#address-cells = <1>; |
| 463 |
#size-cells = <0>; |
| 464 |
|
| 465 |
mboxes = <0>, <&apcs1 13>, <0>, <&apcs1 19>; |
| 466 |
|
| 467 |
apps_smsm: apps@0 { |
| 468 |
reg = <0>; |
| 469 |
|
| 470 |
#qcom,smem-state-cells = <1>; |
| 471 |
}; |
| 472 |
|
| 473 |
hexagon_smsm: hexagon@1 { |
| 474 |
reg = <1>; |
| 475 |
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; |
| 476 |
|
| 477 |
interrupt-controller; |
| 478 |
#interrupt-cells = <2>; |
| 479 |
}; |
| 480 |
|
| 481 |
wcnss_smsm: wcnss@6 { |
| 482 |
reg = <6>; |
| 483 |
interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; |
| 484 |
|
| 485 |
interrupt-controller; |
| 486 |
#interrupt-cells = <2>; |
| 487 |
}; |
| 488 |
}; |
| 489 |
|
| 490 |
soc: soc@0 { |
| 491 |
compatible = "simple-bus"; |
| 492 |
ranges = <0 0 0 0xffffffff>; |
| 493 |
#address-cells = <1>; |
| 494 |
#size-cells = <1>; |
| 495 |
|
| 496 |
qfprom: qfprom@a4000 { |
| 497 |
compatible = "qcom,msm8937-qfprom", "qcom,qfprom"; |
| 498 |
reg = <0x000a4000 0x3000>; |
| 499 |
#address-cells = <1>; |
| 500 |
#size-cells = <1>; |
| 501 |
|
| 502 |
tsens_base1: base1@1d8 { |
| 503 |
reg = <0x1d8 0x1>; |
| 504 |
bits = <0 8>; |
| 505 |
}; |
| 506 |
|
| 507 |
tsens_s5_p1: s5-p1@1d9 { |
| 508 |
reg = <0x1d9 0x1>; |
| 509 |
bits = <0 6>; |
| 510 |
}; |
| 511 |
|
| 512 |
tsens_s5_p2: s5-p2@1d9 { |
| 513 |
reg = <0x1d9 0x2>; |
| 514 |
bits = <6 6>; |
| 515 |
}; |
| 516 |
|
| 517 |
tsens_s6_p1: s6-p1@1da { |
| 518 |
reg = <0x1da 0x2>; |
| 519 |
bits = <4 6>; |
| 520 |
}; |
| 521 |
|
| 522 |
tsens_s6_p2: s6-p2@1db { |
| 523 |
reg = <0x1db 0x1>; |
| 524 |
bits = <2 6>; |
| 525 |
}; |
| 526 |
|
| 527 |
tsens_s7_p1: s7-p1@1dc { |
| 528 |
reg = <0x1dc 0x1>; |
| 529 |
bits = <0 6>; |
| 530 |
}; |
| 531 |
|
| 532 |
tsens_s7_p2: s7-p2@1dc { |
| 533 |
reg = <0x1dc 0x2>; |
| 534 |
bits = <6 6>; |
| 535 |
}; |
| 536 |
|
| 537 |
tsens_s8_p1: s8-p1@1dd { |
| 538 |
reg = <0x1dd 0x2>; |
| 539 |
bits = <4 6>; |
| 540 |
}; |
| 541 |
|
| 542 |
tsens_s8_p2: s8-p2@1de { |
| 543 |
reg = <0x1de 0x1>; |
| 544 |
bits = <2 6>; |
| 545 |
}; |
| 546 |
|
| 547 |
tsens_base2: base2@1df { |
| 548 |
reg = <0x1df 0x1>; |
| 549 |
bits = <0 8>; |
| 550 |
}; |
| 551 |
|
| 552 |
tsens_mode: mode@210 { |
| 553 |
reg = <0x210 0x1>; |
| 554 |
bits = <0 3>; |
| 555 |
}; |
| 556 |
|
| 557 |
tsens_s0_p1: s0-p1@210 { |
| 558 |
reg = <0x210 0x2>; |
| 559 |
bits = <3 6>; |
| 560 |
}; |
| 561 |
|
| 562 |
tsens_s0_p2: s0-p2@211 { |
| 563 |
reg = <0x211 0x1>; |
| 564 |
bits = <1 6>; |
| 565 |
}; |
| 566 |
|
| 567 |
tsens_s1_p1: s1-p1@211 { |
| 568 |
reg = <0x211 0x2>; |
| 569 |
bits = <7 6>; |
| 570 |
}; |
| 571 |
|
| 572 |
tsens_s1_p2: s1-p2@212 { |
| 573 |
reg = <0x212 0x2>; |
| 574 |
bits = <5 6>; |
| 575 |
}; |
| 576 |
|
| 577 |
tsens_s2_p1: s2-p1@213 { |
| 578 |
reg = <0x213 0x2>; |
| 579 |
bits = <3 6>; |
| 580 |
}; |
| 581 |
|
| 582 |
tsens_s2_p2: s2-p2@214 { |
| 583 |
reg = <0x214 0x1>; |
| 584 |
bits = <1 6>; |
| 585 |
}; |
| 586 |
|
| 587 |
tsens_s3_p1: s3-p1@214 { |
| 588 |
reg = <0x214 0x2>; |
| 589 |
bits = <7 6>; |
| 590 |
}; |
| 591 |
|
| 592 |
tsens_s3_p2: s3-p2@215 { |
| 593 |
reg = <0x215 0x2>; |
| 594 |
bits = <5 6>; |
| 595 |
}; |
| 596 |
|
| 597 |
tsens_s4_p1: s4-p1@216 { |
| 598 |
reg = <0x216 0x2>; |
| 599 |
bits = <3 6>; |
| 600 |
}; |
| 601 |
|
| 602 |
tsens_s4_p2: s4-p2@217 { |
| 603 |
reg = <0x217 0x1>; |
| 604 |
bits = <1 6>; |
| 605 |
}; |
| 606 |
|
| 607 |
tsens_s9_p1: s9-p1@230 { |
| 608 |
reg = <0x230 0x1>; |
| 609 |
bits = <0 6>; |
| 610 |
}; |
| 611 |
|
| 612 |
tsens_s9_p2: s9-p2@230 { |
| 613 |
reg = <0x230 0x2>; |
| 614 |
bits = <6 6>; |
| 615 |
}; |
| 616 |
|
| 617 |
tsens_s10_p1: s10-p1@231 { |
| 618 |
reg = <0x231 0x2>; |
| 619 |
bits = <4 6>; |
| 620 |
}; |
| 621 |
|
| 622 |
tsens_s10_p2: s10-p2@232 { |
| 623 |
reg = <0x232 0x1>; |
| 624 |
bits = <2 6>; |
| 625 |
}; |
| 626 |
|
| 627 |
gpu_speed_bin: gpu-speed-bin@201b { |
| 628 |
reg = <0x201b 0x1>; |
| 629 |
bits = <7 1>; |
| 630 |
}; |
| 631 |
}; |
| 632 |
|
| 633 |
rpm_msg_ram: sram@60000 { |
| 634 |
compatible = "qcom,rpm-msg-ram"; |
| 635 |
reg = <0x00060000 0x8000>; |
| 636 |
}; |
| 637 |
|
| 638 |
usb_hs_phy: phy@6c000 { |
| 639 |
compatible = "qcom,usb-hs-28nm-femtophy"; |
| 640 |
reg = <0x0006c000 0x200>; |
| 641 |
#phy-cells = <0>; |
| 642 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| 643 |
<&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, |
| 644 |
<&gcc GCC_USB2A_PHY_SLEEP_CLK>; |
| 645 |
clock-names = "ref", |
| 646 |
"ahb", |
| 647 |
"sleep"; |
| 648 |
resets = <&gcc GCC_QUSB2_PHY_BCR>, |
| 649 |
<&gcc GCC_USB2_HS_PHY_ONLY_BCR>; |
| 650 |
reset-names = "phy", |
| 651 |
"por"; |
| 652 |
status = "disabled"; |
| 653 |
}; |
| 654 |
|
| 655 |
rng@e3000 { |
| 656 |
compatible = "qcom,prng"; |
| 657 |
reg = <0x000e3000 0x1000>; |
| 658 |
clocks = <&gcc GCC_PRNG_AHB_CLK>; |
| 659 |
clock-names = "core"; |
| 660 |
}; |
| 661 |
|
| 662 |
tsens: thermal-sensor@4a9000 { |
| 663 |
compatible = "qcom,msm8937-tsens", "qcom,tsens-v1"; |
| 664 |
reg = <0x004a9000 0x1000>, |
| 665 |
<0x004a8000 0x1000>; |
| 666 |
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; |
| 667 |
interrupt-names = "uplow"; |
| 668 |
nvmem-cells = <&tsens_mode>, |
| 669 |
<&tsens_base1>, <&tsens_base2>, |
| 670 |
<&tsens_s0_p1>, <&tsens_s0_p2>, |
| 671 |
<&tsens_s1_p1>, <&tsens_s1_p2>, |
| 672 |
<&tsens_s2_p1>, <&tsens_s2_p2>, |
| 673 |
<&tsens_s3_p1>, <&tsens_s3_p2>, |
| 674 |
<&tsens_s4_p1>, <&tsens_s4_p2>, |
| 675 |
<&tsens_s5_p1>, <&tsens_s5_p2>, |
| 676 |
<&tsens_s6_p1>, <&tsens_s6_p2>, |
| 677 |
<&tsens_s7_p1>, <&tsens_s7_p2>, |
| 678 |
<&tsens_s8_p1>, <&tsens_s8_p2>, |
| 679 |
<&tsens_s9_p1>, <&tsens_s9_p2>, |
| 680 |
<&tsens_s10_p1>, <&tsens_s10_p2>; |
| 681 |
nvmem-cell-names = "mode", |
| 682 |
"base1", "base2", |
| 683 |
"s0_p1", "s0_p2", |
| 684 |
"s1_p1", "s1_p2", |
| 685 |
"s2_p1", "s2_p2", |
| 686 |
"s3_p1", "s3_p2", |
| 687 |
"s4_p1", "s4_p2", |
| 688 |
"s5_p1", "s5_p2", |
| 689 |
"s6_p1", "s6_p2", |
| 690 |
"s7_p1", "s7_p2", |
| 691 |
"s8_p1", "s8_p2", |
| 692 |
"s9_p1", "s9_p2", |
| 693 |
"s10_p1", "s10_p2"; |
| 694 |
#qcom,sensors = <11>; |
| 695 |
#thermal-sensor-cells = <1>; |
| 696 |
}; |
| 697 |
|
| 698 |
restart@4ab000 { |
| 699 |
compatible = "qcom,pshold"; |
| 700 |
reg = <0x004ab000 0x4>; |
| 701 |
}; |
| 702 |
|
| 703 |
tlmm: pinctrl@1000000 { |
| 704 |
compatible = "qcom,msm8917-pinctrl"; |
| 705 |
reg = <0x01000000 0x300000>; |
| 706 |
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| 707 |
gpio-controller; |
| 708 |
gpio-ranges = <&tlmm 0 0 134>; |
| 709 |
#gpio-cells = <2>; |
| 710 |
interrupt-controller; |
| 711 |
#interrupt-cells = <2>; |
| 712 |
|
| 713 |
blsp1_i2c2_default: blsp1-i2c2-default-state { |
| 714 |
pins = "gpio6", "gpio7"; |
| 715 |
function = "blsp_i2c2"; |
| 716 |
drive-strength = <2>; |
| 717 |
bias-disable; |
| 718 |
}; |
| 719 |
|
| 720 |
blsp1_i2c2_sleep: blsp1-i2c2-sleep-state { |
| 721 |
pins = "gpio6", "gpio7"; |
| 722 |
function = "gpio"; |
| 723 |
drive-strength = <2>; |
| 724 |
bias-disable; |
| 725 |
}; |
| 726 |
|
| 727 |
blsp1_i2c3_default: blsp1-i2c3-default-state { |
| 728 |
pins = "gpio10", "gpio11"; |
| 729 |
function = "blsp_i2c3"; |
| 730 |
drive-strength = <2>; |
| 731 |
bias-disable; |
| 732 |
}; |
| 733 |
|
| 734 |
blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { |
| 735 |
pins = "gpio10", "gpio11"; |
| 736 |
function = "gpio"; |
| 737 |
drive-strength = <2>; |
| 738 |
bias-disable; |
| 739 |
}; |
| 740 |
|
| 741 |
blsp1_i2c4_default: blsp1-i2c4-default-state { |
| 742 |
pins = "gpio14", "gpio15"; |
| 743 |
function = "blsp_i2c4"; |
| 744 |
drive-strength = <2>; |
| 745 |
bias-disable; |
| 746 |
}; |
| 747 |
|
| 748 |
blsp1_i2c4_sleep: blsp1-i2c4-sleep-state { |
| 749 |
pins = "gpio14", "gpio15"; |
| 750 |
function = "gpio"; |
| 751 |
drive-strength = <2>; |
| 752 |
bias-disable; |
| 753 |
}; |
| 754 |
|
| 755 |
blsp2_i2c1_default: blsp2-i2c1-default-state { |
| 756 |
pins = "gpio18", "gpio19"; |
| 757 |
function = "blsp_i2c5"; |
| 758 |
drive-strength = <2>; |
| 759 |
bias-disable; |
| 760 |
}; |
| 761 |
|
| 762 |
blsp2_i2c1_sleep: blsp2-i2c1-sleep-state { |
| 763 |
pins = "gpio18", "gpio19"; |
| 764 |
function = "gpio"; |
| 765 |
drive-strength = <2>; |
| 766 |
bias-disable; |
| 767 |
}; |
| 768 |
|
| 769 |
blsp1_spi3_default: blsp1-spi3-default-state { |
| 770 |
cs-pins { |
| 771 |
pins = "gpio10"; |
| 772 |
function = "blsp_spi3"; |
| 773 |
drive-strength = <2>; |
| 774 |
bias-disable; |
| 775 |
}; |
| 776 |
|
| 777 |
spi-pins { |
| 778 |
pins = "gpio8", "gpio9", "gpio11"; |
| 779 |
function = "blsp_spi3"; |
| 780 |
drive-strength = <12>; |
| 781 |
bias-disable; |
| 782 |
}; |
| 783 |
}; |
| 784 |
|
| 785 |
blsp1_spi3_sleep: blsp1-spi3-sleep-state { |
| 786 |
cs-pins { |
| 787 |
pins = "gpio10"; |
| 788 |
function = "gpio"; |
| 789 |
drive-strength = <2>; |
| 790 |
bias-disable; |
| 791 |
}; |
| 792 |
|
| 793 |
spi-pins { |
| 794 |
pins = "gpio8", "gpio9", "gpio11"; |
| 795 |
function = "gpio"; |
| 796 |
drive-strength = <2>; |
| 797 |
bias-pull-down; |
| 798 |
}; |
| 799 |
}; |
| 800 |
|
| 801 |
blsp2_spi2_default: blsp2-spi2-default-state { |
| 802 |
cs0-pins { |
| 803 |
pins = "gpio47"; |
| 804 |
function = "blsp_spi6"; |
| 805 |
drive-strength = <16>; |
| 806 |
bias-disable; |
| 807 |
}; |
| 808 |
|
| 809 |
cs1-pins { |
| 810 |
pins = "gpio22"; |
| 811 |
function = "blsp_spi6"; |
| 812 |
drive-strength = <16>; |
| 813 |
bias-disable; |
| 814 |
}; |
| 815 |
|
| 816 |
spi-pins { |
| 817 |
pins = "gpio20", "gpio21", "gpio23"; |
| 818 |
function = "blsp_spi6"; |
| 819 |
drive-strength = <16>; |
| 820 |
bias-disable; |
| 821 |
}; |
| 822 |
}; |
| 823 |
|
| 824 |
blsp2_spi2_sleep: blsp2-spi2-sleep-state { |
| 825 |
cs0-pins { |
| 826 |
pins = "gpio47"; |
| 827 |
function = "gpio"; |
| 828 |
drive-strength = <2>; |
| 829 |
bias-disable; |
| 830 |
}; |
| 831 |
|
| 832 |
cs1-pins { |
| 833 |
pins = "gpio22"; |
| 834 |
function = "gpio"; |
| 835 |
drive-strength = <2>; |
| 836 |
bias-disable; |
| 837 |
}; |
| 838 |
|
| 839 |
spi-pins { |
| 840 |
pins = "gpio20", "gpio21", "gpio23"; |
| 841 |
function = "gpio"; |
| 842 |
drive-strength = <2>; |
| 843 |
bias-pull-down; |
| 844 |
}; |
| 845 |
}; |
| 846 |
|
| 847 |
blsp1_uart1_default: blsp1-uart1-default-state { |
| 848 |
pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| 849 |
function = "blsp_uart1"; |
| 850 |
drive-strength = <2>; |
| 851 |
bias-disable; |
| 852 |
}; |
| 853 |
|
| 854 |
blsp1_uart1_sleep: blsp1-uart1-sleep-state { |
| 855 |
pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| 856 |
function = "gpio"; |
| 857 |
drive-strength = <2>; |
| 858 |
bias-disable; |
| 859 |
}; |
| 860 |
|
| 861 |
blsp1_uart2_default: blsp1-uart2-default-state { |
| 862 |
pins = "gpio4", "gpio5"; |
| 863 |
function = "blsp_uart2"; |
| 864 |
drive-strength = <2>; |
| 865 |
bias-disable; |
| 866 |
}; |
| 867 |
|
| 868 |
blsp1_uart2_sleep: blsp1-uart2-sleep-state { |
| 869 |
pins = "gpio4", "gpio5"; |
| 870 |
function = "gpio"; |
| 871 |
drive-strength = <2>; |
| 872 |
bias-pull-down; |
| 873 |
}; |
| 874 |
|
| 875 |
sdc1_default: sdc1-default-state { |
| 876 |
clk-pins { |
| 877 |
pins = "sdc1_clk"; |
| 878 |
drive-strength = <16>; |
| 879 |
bias-disable; |
| 880 |
}; |
| 881 |
|
| 882 |
cmd-pins { |
| 883 |
pins = "sdc1_cmd"; |
| 884 |
drive-strength = <10>; |
| 885 |
bias-pull-up; |
| 886 |
}; |
| 887 |
|
| 888 |
data-pins { |
| 889 |
pins = "sdc1_data"; |
| 890 |
drive-strength = <10>; |
| 891 |
bias-pull-up; |
| 892 |
}; |
| 893 |
|
| 894 |
rclk-pins { |
| 895 |
pins = "sdc1_rclk"; |
| 896 |
bias-pull-down; |
| 897 |
}; |
| 898 |
}; |
| 899 |
|
| 900 |
sdc1_sleep: sdc1-sleep-state { |
| 901 |
clk-pins { |
| 902 |
pins = "sdc1_clk"; |
| 903 |
drive-strength = <2>; |
| 904 |
bias-disable; |
| 905 |
}; |
| 906 |
|
| 907 |
cmd-pins { |
| 908 |
pins = "sdc1_cmd"; |
| 909 |
drive-strength = <2>; |
| 910 |
bias-pull-up; |
| 911 |
}; |
| 912 |
|
| 913 |
data-pins { |
| 914 |
pins = "sdc1_data"; |
| 915 |
drive-strength = <2>; |
| 916 |
bias-pull-up; |
| 917 |
}; |
| 918 |
|
| 919 |
rclk-pins { |
| 920 |
pins = "sdc1_rclk"; |
| 921 |
bias-pull-down; |
| 922 |
}; |
| 923 |
}; |
| 924 |
|
| 925 |
sdc2_default: sdc2-default-state { |
| 926 |
clk-pins { |
| 927 |
pins = "sdc2_clk"; |
| 928 |
drive-strength = <16>; |
| 929 |
bias-disable; |
| 930 |
}; |
| 931 |
|
| 932 |
sdc2_cmd_default: cmd-pins { |
| 933 |
pins = "sdc2_cmd"; |
| 934 |
drive-strength = <16>; |
| 935 |
bias-pull-up; |
| 936 |
}; |
| 937 |
|
| 938 |
sdc2_data_default: data-pins { |
| 939 |
pins = "sdc2_data"; |
| 940 |
drive-strength = <16>; |
| 941 |
bias-pull-up; |
| 942 |
}; |
| 943 |
}; |
| 944 |
|
| 945 |
sdc2_sleep: sdc2-sleep-state { |
| 946 |
clk-pins { |
| 947 |
pins = "sdc2_clk"; |
| 948 |
drive-strength = <2>; |
| 949 |
bias-disable; |
| 950 |
}; |
| 951 |
|
| 952 |
cmd-pins { |
| 953 |
pins = "sdc2_cmd"; |
| 954 |
drive-strength = <2>; |
| 955 |
bias-pull-up; |
| 956 |
}; |
| 957 |
|
| 958 |
data-pins { |
| 959 |
pins = "sdc2_data"; |
| 960 |
drive-strength = <2>; |
| 961 |
bias-pull-up; |
| 962 |
}; |
| 963 |
}; |
| 964 |
|
| 965 |
wcnss_pin_a: wcnss-active-state { |
| 966 |
wcss-wlan-pins { |
| 967 |
pins = "gpio79", "gpio80"; |
| 968 |
function = "wcss_wlan"; |
| 969 |
drive-strength = <6>; |
| 970 |
bias-pull-up; |
| 971 |
|
| 972 |
}; |
| 973 |
|
| 974 |
wcss-wlan0-pins { |
| 975 |
pins = "gpio78"; |
| 976 |
function = "wcss_wlan0"; |
| 977 |
drive-strength = <6>; |
| 978 |
bias-pull-up; |
| 979 |
|
| 980 |
}; |
| 981 |
|
| 982 |
wcss-wlan1-pins { |
| 983 |
pins = "gpio77"; |
| 984 |
function = "wcss_wlan1"; |
| 985 |
drive-strength = <6>; |
| 986 |
bias-pull-up; |
| 987 |
|
| 988 |
}; |
| 989 |
|
| 990 |
wcss-wlan2-pins { |
| 991 |
pins = "gpio76"; |
| 992 |
function = "wcss_wlan2"; |
| 993 |
drive-strength = <6>; |
| 994 |
bias-pull-up; |
| 995 |
|
| 996 |
}; |
| 997 |
}; |
| 998 |
}; |
| 999 |
|
| 1000 |
gcc: clock-controller@1800000 { |
| 1001 |
compatible = "qcom,gcc-msm8937"; |
| 1002 |
reg = <0x01800000 0x80000>; |
| 1003 |
#clock-cells = <1>; |
| 1004 |
#reset-cells = <1>; |
| 1005 |
#power-domain-cells = <1>; |
| 1006 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| 1007 |
<&sleep_clk>, |
| 1008 |
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, |
| 1009 |
<&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, |
| 1010 |
<&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, |
| 1011 |
<&mdss_dsi1_phy DSI_BYTE_PLL_CLK>; |
| 1012 |
clock-names = "xo", |
| 1013 |
"sleep", |
| 1014 |
"dsi0pll", |
| 1015 |
"dsi0pllbyte", |
| 1016 |
"dsi1pll", |
| 1017 |
"dsi1pllbyte"; |
| 1018 |
}; |
| 1019 |
|
| 1020 |
tcsr_mutex: hwlock@1905000 { |
| 1021 |
compatible = "qcom,tcsr-mutex"; |
| 1022 |
reg = <0x01905000 0x20000>; |
| 1023 |
#hwlock-cells = <1>; |
| 1024 |
}; |
| 1025 |
|
| 1026 |
tcsr: syscon@1937000 { |
| 1027 |
compatible = "qcom,tcsr-msm8937", "syscon"; |
| 1028 |
reg = <0x01937000 0x30000>; |
| 1029 |
}; |
| 1030 |
|
| 1031 |
mdss: display-subsystem@1a00000 { |
| 1032 |
compatible = "qcom,mdss"; |
| 1033 |
reg = <0x01a00000 0x1000>, |
| 1034 |
<0x01ab0000 0x3000>; |
| 1035 |
reg-names = "mdss_phys", |
| 1036 |
"vbif_phys"; |
| 1037 |
ranges; |
| 1038 |
|
| 1039 |
power-domains = <&gcc MDSS_GDSC>; |
| 1040 |
|
| 1041 |
clocks = <&gcc GCC_MDSS_AHB_CLK>, |
| 1042 |
<&gcc GCC_MDSS_AXI_CLK>, |
| 1043 |
<&gcc GCC_MDSS_VSYNC_CLK>; |
| 1044 |
clock-names = "iface", |
| 1045 |
"bus", |
| 1046 |
"vsync"; |
| 1047 |
resets = <&gcc GCC_MDSS_BCR>; |
| 1048 |
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| 1049 |
|
| 1050 |
interrupt-controller; |
| 1051 |
#interrupt-cells = <1>; |
| 1052 |
|
| 1053 |
#address-cells = <1>; |
| 1054 |
#size-cells = <1>; |
| 1055 |
|
| 1056 |
status = "disabled"; |
| 1057 |
|
| 1058 |
mdp: display-controller@1a01000 { |
| 1059 |
compatible = "qcom,msm8937-mdp5", "qcom,mdp5"; |
| 1060 |
reg = <0x01a01000 0x89000>; |
| 1061 |
reg-names = "mdp_phys"; |
| 1062 |
|
| 1063 |
interrupt-parent = <&mdss>; |
| 1064 |
interrupts = <0>; |
| 1065 |
|
| 1066 |
clocks = <&gcc GCC_MDSS_AHB_CLK>, |
| 1067 |
<&gcc GCC_MDSS_AXI_CLK>, |
| 1068 |
<&gcc GCC_MDSS_MDP_CLK>, |
| 1069 |
<&gcc GCC_MDSS_VSYNC_CLK>; |
| 1070 |
clock-names = "iface", |
| 1071 |
"bus", |
| 1072 |
"core", |
| 1073 |
"vsync"; |
| 1074 |
|
| 1075 |
iommus = <&apps_iommu 0x15>; |
| 1076 |
|
| 1077 |
ports { |
| 1078 |
#address-cells = <1>; |
| 1079 |
#size-cells = <0>; |
| 1080 |
|
| 1081 |
port@0 { |
| 1082 |
reg = <0>; |
| 1083 |
mdp5_intf1_out: endpoint { |
| 1084 |
remote-endpoint = <&mdss_dsi0_in>; |
| 1085 |
}; |
| 1086 |
}; |
| 1087 |
|
| 1088 |
port@1 { |
| 1089 |
reg = <1>; |
| 1090 |
mdp5_intf2_out: endpoint { |
| 1091 |
remote-endpoint = <&mdss_dsi1_in>; |
| 1092 |
}; |
| 1093 |
}; |
| 1094 |
}; |
| 1095 |
}; |
| 1096 |
|
| 1097 |
mdss_dsi0: dsi@1a94000 { |
| 1098 |
compatible = "qcom,mdss-dsi-ctrl"; |
| 1099 |
reg = <0x01a94000 0x300>; |
| 1100 |
reg-names = "dsi_ctrl"; |
| 1101 |
|
| 1102 |
interrupt-parent = <&mdss>; |
| 1103 |
interrupts = <4>; |
| 1104 |
|
| 1105 |
assigned-clocks = <&gcc BYTE0_CLK_SRC>, |
| 1106 |
<&gcc PCLK0_CLK_SRC>; |
| 1107 |
assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, |
| 1108 |
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; |
| 1109 |
|
| 1110 |
clocks = <&gcc GCC_MDSS_MDP_CLK>, |
| 1111 |
<&gcc GCC_MDSS_AHB_CLK>, |
| 1112 |
<&gcc GCC_MDSS_AXI_CLK>, |
| 1113 |
<&gcc GCC_MDSS_BYTE0_CLK>, |
| 1114 |
<&gcc GCC_MDSS_PCLK0_CLK>, |
| 1115 |
<&gcc GCC_MDSS_ESC0_CLK>; |
| 1116 |
clock-names = "mdp_core", |
| 1117 |
"iface", |
| 1118 |
"bus", |
| 1119 |
"byte", |
| 1120 |
"pixel", |
| 1121 |
"core"; |
| 1122 |
phys = <&mdss_dsi0_phy>; |
| 1123 |
|
| 1124 |
operating-points-v2 = <&mdss_dsi0_opp_table>; |
| 1125 |
power-domains = <&rpmpd RPMPD_VDDCX>; |
| 1126 |
|
| 1127 |
#address-cells = <1>; |
| 1128 |
#size-cells = <0>; |
| 1129 |
|
| 1130 |
status = "disabled"; |
| 1131 |
|
| 1132 |
ports { |
| 1133 |
#address-cells = <1>; |
| 1134 |
#size-cells = <0>; |
| 1135 |
|
| 1136 |
port@0 { |
| 1137 |
reg = <0>; |
| 1138 |
mdss_dsi0_in: endpoint { |
| 1139 |
remote-endpoint = <&mdp5_intf1_out>; |
| 1140 |
}; |
| 1141 |
}; |
| 1142 |
|
| 1143 |
port@1 { |
| 1144 |
reg = <1>; |
| 1145 |
mdss_dsi0_out: endpoint { |
| 1146 |
}; |
| 1147 |
}; |
| 1148 |
}; |
| 1149 |
|
| 1150 |
mdss_dsi0_opp_table: opp-table { |
| 1151 |
compatible = "operating-points-v2"; |
| 1152 |
|
| 1153 |
opp-125000000 { |
| 1154 |
opp-hz = /bits/ 64 <125000000>; |
| 1155 |
required-opps = <&rpmpd_opp_svs>; |
| 1156 |
}; |
| 1157 |
|
| 1158 |
opp-187500000 { |
| 1159 |
opp-hz = /bits/ 64 <187500000>; |
| 1160 |
required-opps = <&rpmpd_opp_nom>; |
| 1161 |
}; |
| 1162 |
}; |
| 1163 |
}; |
| 1164 |
|
| 1165 |
mdss_dsi0_phy: phy@1a94400 { |
| 1166 |
compatible = "qcom,dsi-phy-28nm-8937"; |
| 1167 |
reg = <0x01a94a00 0xd4>, |
| 1168 |
<0x01a94400 0x280>, |
| 1169 |
<0x01a94b80 0x30>; |
| 1170 |
reg-names = "dsi_pll", |
| 1171 |
"dsi_phy", |
| 1172 |
"dsi_phy_regulator"; |
| 1173 |
|
| 1174 |
#clock-cells = <1>; |
| 1175 |
#phy-cells = <0>; |
| 1176 |
|
| 1177 |
clocks = <&gcc GCC_MDSS_AHB_CLK>, |
| 1178 |
<&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 1179 |
clock-names = "iface", |
| 1180 |
"ref"; |
| 1181 |
|
| 1182 |
status = "disabled"; |
| 1183 |
}; |
| 1184 |
|
| 1185 |
mdss_dsi1: dsi@1a96000 { |
| 1186 |
compatible = "qcom,mdss-dsi-ctrl"; |
| 1187 |
reg = <0x01a96000 0x300>; |
| 1188 |
reg-names = "dsi_ctrl"; |
| 1189 |
|
| 1190 |
interrupt-parent = <&mdss>; |
| 1191 |
interrupts = <4>; |
| 1192 |
|
| 1193 |
assigned-clocks = <&gcc MSM8937_BYTE1_CLK_SRC>, |
| 1194 |
<&gcc MSM8937_PCLK1_CLK_SRC>; |
| 1195 |
assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, |
| 1196 |
<&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>; |
| 1197 |
|
| 1198 |
clocks = <&gcc GCC_MDSS_MDP_CLK>, |
| 1199 |
<&gcc GCC_MDSS_AHB_CLK>, |
| 1200 |
<&gcc GCC_MDSS_AXI_CLK>, |
| 1201 |
<&gcc MSM8937_GCC_MDSS_BYTE1_CLK>, |
| 1202 |
<&gcc MSM8937_GCC_MDSS_PCLK1_CLK>, |
| 1203 |
<&gcc MSM8937_GCC_MDSS_ESC1_CLK>; |
| 1204 |
clock-names = "mdp_core", |
| 1205 |
"iface", |
| 1206 |
"bus", |
| 1207 |
"byte", |
| 1208 |
"pixel", |
| 1209 |
"core"; |
| 1210 |
phys = <&mdss_dsi1_phy>; |
| 1211 |
|
| 1212 |
operating-points-v2 = <&mdss_dsi1_opp_table>; |
| 1213 |
power-domains = <&rpmpd RPMPD_VDDCX>; |
| 1214 |
|
| 1215 |
#address-cells = <1>; |
| 1216 |
#size-cells = <0>; |
| 1217 |
|
| 1218 |
status = "disabled"; |
| 1219 |
|
| 1220 |
ports { |
| 1221 |
#address-cells = <1>; |
| 1222 |
#size-cells = <0>; |
| 1223 |
|
| 1224 |
port@0 { |
| 1225 |
reg = <0>; |
| 1226 |
mdss_dsi1_in: endpoint { |
| 1227 |
remote-endpoint = <&mdp5_intf2_out>; |
| 1228 |
}; |
| 1229 |
}; |
| 1230 |
|
| 1231 |
port@1 { |
| 1232 |
reg = <1>; |
| 1233 |
mdss_dsi1_out: endpoint { |
| 1234 |
}; |
| 1235 |
}; |
| 1236 |
}; |
| 1237 |
|
| 1238 |
mdss_dsi1_opp_table: opp-table { |
| 1239 |
compatible = "operating-points-v2"; |
| 1240 |
|
| 1241 |
opp-125000000 { |
| 1242 |
opp-hz = /bits/ 64 <125000000>; |
| 1243 |
required-opps = <&rpmpd_opp_svs>; |
| 1244 |
}; |
| 1245 |
|
| 1246 |
opp-187500000 { |
| 1247 |
opp-hz = /bits/ 64 <187500000>; |
| 1248 |
required-opps = <&rpmpd_opp_nom>; |
| 1249 |
}; |
| 1250 |
}; |
| 1251 |
}; |
| 1252 |
|
| 1253 |
mdss_dsi1_phy: phy@1a96a00 { |
| 1254 |
compatible = "qcom,dsi-phy-28nm-8937"; |
| 1255 |
reg = <0x01a96a00 0xd4>, |
| 1256 |
<0x01a96400 0x280>, |
| 1257 |
<0x01a94b80 0x30>; |
| 1258 |
reg-names = "dsi_pll", |
| 1259 |
"dsi_phy", |
| 1260 |
"dsi_phy_regulator"; |
| 1261 |
|
| 1262 |
#clock-cells = <1>; |
| 1263 |
#phy-cells = <0>; |
| 1264 |
|
| 1265 |
clocks = <&gcc GCC_MDSS_AHB_CLK>, |
| 1266 |
<&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 1267 |
clock-names = "iface", |
| 1268 |
"ref"; |
| 1269 |
|
| 1270 |
status = "disabled"; |
| 1271 |
}; |
| 1272 |
}; |
| 1273 |
|
| 1274 |
gpu: gpu@1c00000 { |
| 1275 |
compatible = "qcom,adreno-505.0", "qcom,adreno"; |
| 1276 |
reg = <0x01c00000 0x40000>; |
| 1277 |
reg-names = "kgsl_3d0_reg_memory"; |
| 1278 |
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 1279 |
interrupt-names = "kgsl_3d0_irq"; |
| 1280 |
#cooling-cells = <2>; |
| 1281 |
clocks = <&gcc GCC_OXILI_GFX3D_CLK>, |
| 1282 |
<&gcc GCC_OXILI_AHB_CLK>, |
| 1283 |
<&gcc GCC_BIMC_GFX_CLK>, |
| 1284 |
<&gcc GCC_BIMC_GPU_CLK>, |
| 1285 |
<&gcc MSM8937_GCC_OXILI_TIMER_CLK>, |
| 1286 |
<&gcc MSM8937_GCC_OXILI_AON_CLK>; |
| 1287 |
clock-names = "core", |
| 1288 |
"iface", |
| 1289 |
"mem_iface", |
| 1290 |
"alt_mem_iface", |
| 1291 |
"rbbmtimer", |
| 1292 |
"alwayson"; |
| 1293 |
operating-points-v2 = <&gpu_opp_table>; |
| 1294 |
power-domains = <&gcc OXILI_GX_GDSC>; |
| 1295 |
|
| 1296 |
iommus = <&adreno_smmu 0>; |
| 1297 |
|
| 1298 |
nvmem-cells = <&gpu_speed_bin>; |
| 1299 |
nvmem-cell-names = "speed_bin"; |
| 1300 |
|
| 1301 |
status = "disabled"; |
| 1302 |
|
| 1303 |
gpu_opp_table: opp-table { |
| 1304 |
compatible = "operating-points-v2"; |
| 1305 |
|
| 1306 |
opp-19200000 { |
| 1307 |
opp-hz = /bits/ 64 <19200000>; |
| 1308 |
opp-supported-hw = <0xff>; |
| 1309 |
required-opps = <&rpmpd_opp_min_svs>; |
| 1310 |
}; |
| 1311 |
|
| 1312 |
opp-216000000 { |
| 1313 |
opp-hz = /bits/ 64 <216000000>; |
| 1314 |
opp-supported-hw = <0xff>; |
| 1315 |
required-opps = <&rpmpd_opp_svs>; |
| 1316 |
}; |
| 1317 |
|
| 1318 |
opp-300000000 { |
| 1319 |
opp-hz = /bits/ 64 <300000000>; |
| 1320 |
opp-supported-hw = <0xff>; |
| 1321 |
required-opps = <&rpmpd_opp_svs_plus>; |
| 1322 |
}; |
| 1323 |
|
| 1324 |
opp-375000000 { |
| 1325 |
opp-hz = /bits/ 64 <375000000>; |
| 1326 |
opp-supported-hw = <0xff>; |
| 1327 |
required-opps = <&rpmpd_opp_nom>; |
| 1328 |
}; |
| 1329 |
|
| 1330 |
opp-400000000 { |
| 1331 |
opp-hz = /bits/ 64 <400000000>; |
| 1332 |
opp-supported-hw = <0xff>; |
| 1333 |
required-opps = <&rpmpd_opp_nom_plus>; |
| 1334 |
}; |
| 1335 |
|
| 1336 |
opp-450000000 { |
| 1337 |
opp-hz = /bits/ 64 <450000000>; |
| 1338 |
opp-supported-hw = <0xff>; |
| 1339 |
required-opps = <&rpmpd_opp_turbo>; |
| 1340 |
}; |
| 1341 |
}; |
| 1342 |
}; |
| 1343 |
|
| 1344 |
adreno_smmu: iommu@1c40000 { |
| 1345 |
compatible = "qcom,msm8996-smmu-v2", |
| 1346 |
"qcom,adreno-smmu", |
| 1347 |
"qcom,smmu-v2"; |
| 1348 |
reg = <0x01c40000 0x10000>; |
| 1349 |
|
| 1350 |
#global-interrupts = <1>; |
| 1351 |
interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, |
| 1352 |
<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>, |
| 1353 |
<GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, |
| 1354 |
<GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>, |
| 1355 |
<GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; |
| 1356 |
#iommu-cells = <1>; |
| 1357 |
|
| 1358 |
clocks = <&gcc GCC_BIMC_GFX_CLK>, |
| 1359 |
<&gcc GCC_OXILI_AHB_CLK>; |
| 1360 |
clock-names = "bus", |
| 1361 |
"iface"; |
| 1362 |
|
| 1363 |
power-domains = <&gcc MSM8937_OXILI_CX_GDSC>; |
| 1364 |
}; |
| 1365 |
|
| 1366 |
apps_iommu: iommu@1e20000 { |
| 1367 |
compatible = "qcom,msm8937-iommu", "qcom,msm-iommu-v1"; |
| 1368 |
ranges = <0 0x01e20000 0x20000>; |
| 1369 |
|
| 1370 |
clocks = <&gcc GCC_SMMU_CFG_CLK>, |
| 1371 |
<&gcc GCC_APSS_TCU_CLK>; |
| 1372 |
clock-names = "iface", |
| 1373 |
"bus"; |
| 1374 |
|
| 1375 |
qcom,iommu-secure-id = <17>; |
| 1376 |
|
| 1377 |
#address-cells = <1>; |
| 1378 |
#iommu-cells = <1>; |
| 1379 |
#size-cells = <1>; |
| 1380 |
|
| 1381 |
/* VFE */ |
| 1382 |
iommu-ctx@14000 { |
| 1383 |
compatible = "qcom,msm-iommu-v1-ns"; |
| 1384 |
reg = <0x14000 0x1000>; |
| 1385 |
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; |
| 1386 |
}; |
| 1387 |
|
| 1388 |
/* MDP_0 */ |
| 1389 |
iommu-ctx@15000 { |
| 1390 |
compatible = "qcom,msm-iommu-v1-ns"; |
| 1391 |
reg = <0x15000 0x1000>; |
| 1392 |
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; |
| 1393 |
}; |
| 1394 |
|
| 1395 |
/* VENUS_NS */ |
| 1396 |
iommu-ctx@16000 { |
| 1397 |
compatible = "qcom,msm-iommu-v1-ns"; |
| 1398 |
reg = <0x16000 0x1000>; |
| 1399 |
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; |
| 1400 |
}; |
| 1401 |
}; |
| 1402 |
|
| 1403 |
spmi_bus: spmi@200f000 { |
| 1404 |
compatible = "qcom,spmi-pmic-arb"; |
| 1405 |
reg = <0x0200f000 0x001000>, |
| 1406 |
<0x02400000 0x800000>, |
| 1407 |
<0x02c00000 0x800000>, |
| 1408 |
<0x03800000 0x200000>, |
| 1409 |
<0x0200a000 0x002100>; |
| 1410 |
reg-names = "core", |
| 1411 |
"chnls", |
| 1412 |
"obsrvr", |
| 1413 |
"intr", |
| 1414 |
"cnfg"; |
| 1415 |
interrupt-names = "periph_irq"; |
| 1416 |
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; |
| 1417 |
qcom,ee = <0>; |
| 1418 |
qcom,channel = <0>; |
| 1419 |
#address-cells = <2>; |
| 1420 |
#size-cells = <0>; |
| 1421 |
interrupt-controller; |
| 1422 |
#interrupt-cells = <4>; |
| 1423 |
}; |
| 1424 |
|
| 1425 |
bam_dmux_dma: dma-controller@4044000 { |
| 1426 |
compatible = "qcom,bam-v1.7.0"; |
| 1427 |
reg = <0x04044000 0x19000>; |
| 1428 |
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; |
| 1429 |
#dma-cells = <1>; |
| 1430 |
qcom,ee = <0>; |
| 1431 |
|
| 1432 |
num-channels = <6>; |
| 1433 |
qcom,num-ees = <1>; |
| 1434 |
qcom,powered-remotely; |
| 1435 |
|
| 1436 |
status = "disabled"; |
| 1437 |
}; |
| 1438 |
|
| 1439 |
sdhc_1: mmc@7824900 { |
| 1440 |
compatible = "qcom,sdhci-msm-v4"; |
| 1441 |
reg = <0x07824900 0x500>, |
| 1442 |
<0x07824000 0x800>; |
| 1443 |
reg-names = "hc", |
| 1444 |
"core"; |
| 1445 |
|
| 1446 |
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| 1447 |
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| 1448 |
interrupt-names = "hc_irq", |
| 1449 |
"pwr_irq"; |
| 1450 |
clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| 1451 |
<&gcc GCC_SDCC1_APPS_CLK>, |
| 1452 |
<&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 1453 |
clock-names = "iface", |
| 1454 |
"core", |
| 1455 |
"xo"; |
| 1456 |
pinctrl-0 = <&sdc1_default>; |
| 1457 |
pinctrl-1 = <&sdc1_sleep>; |
| 1458 |
pinctrl-names = "default", |
| 1459 |
"sleep"; |
| 1460 |
power-domains = <&rpmpd RPMPD_VDDCX>; |
| 1461 |
mmc-hs200-1_8v; |
| 1462 |
mmc-hs400-1_8v; |
| 1463 |
mmc-ddr-1_8v; |
| 1464 |
bus-width = <8>; |
| 1465 |
non-removable; |
| 1466 |
status = "disabled"; |
| 1467 |
}; |
| 1468 |
|
| 1469 |
sdhc_2: mmc@7864900 { |
| 1470 |
compatible = "qcom,sdhci-msm-v4"; |
| 1471 |
reg = <0x07864900 0x500>, |
| 1472 |
<0x07864000 0x800>; |
| 1473 |
reg-names = "hc", |
| 1474 |
"core"; |
| 1475 |
|
| 1476 |
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| 1477 |
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; |
| 1478 |
interrupt-names = "hc_irq", |
| 1479 |
"pwr_irq"; |
| 1480 |
clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| 1481 |
<&gcc GCC_SDCC2_APPS_CLK>, |
| 1482 |
<&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 1483 |
clock-names = "iface", |
| 1484 |
"core", |
| 1485 |
"xo"; |
| 1486 |
pinctrl-0 = <&sdc2_default>; |
| 1487 |
pinctrl-1 = <&sdc2_sleep>; |
| 1488 |
pinctrl-names = "default", |
| 1489 |
"sleep"; |
| 1490 |
power-domains = <&rpmpd RPMPD_VDDCX>; |
| 1491 |
bus-width = <4>; |
| 1492 |
status = "disabled"; |
| 1493 |
}; |
| 1494 |
|
| 1495 |
blsp1_dma: dma-controller@7884000 { |
| 1496 |
compatible = "qcom,bam-v1.7.0"; |
| 1497 |
reg = <0x07884000 0x1f000>; |
| 1498 |
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; |
| 1499 |
clocks = <&gcc GCC_BLSP1_AHB_CLK>; |
| 1500 |
clock-names = "bam_clk"; |
| 1501 |
qcom,controlled-remotely; |
| 1502 |
#dma-cells = <1>; |
| 1503 |
num-channels = <12>; |
| 1504 |
qcom,num-ees = <4>; |
| 1505 |
qcom,ee = <0>; |
| 1506 |
}; |
| 1507 |
|
| 1508 |
blsp1_uart2: serial@78b0000 { |
| 1509 |
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| 1510 |
reg = <0x078b0000 0x200>; |
| 1511 |
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| 1512 |
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, |
| 1513 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1514 |
clock-names = "core", |
| 1515 |
"iface"; |
| 1516 |
dmas = <&blsp1_dma 2>, |
| 1517 |
<&blsp1_dma 3>; |
| 1518 |
dma-names = "tx", |
| 1519 |
"rx"; |
| 1520 |
pinctrl-0 = <&blsp1_uart2_default>; |
| 1521 |
pinctrl-1 = <&blsp1_uart2_sleep>; |
| 1522 |
pinctrl-names = "default", |
| 1523 |
"sleep"; |
| 1524 |
status = "disabled"; |
| 1525 |
}; |
| 1526 |
|
| 1527 |
blsp1_i2c2: i2c@78b6000 { |
| 1528 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 1529 |
reg = <0x078b6000 0x600>; |
| 1530 |
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 1531 |
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, |
| 1532 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1533 |
clock-names = "core", "iface"; |
| 1534 |
dmas = <&blsp1_dma 6>, |
| 1535 |
<&blsp1_dma 7>; |
| 1536 |
dma-names = "tx", |
| 1537 |
"rx"; |
| 1538 |
pinctrl-0 = <&blsp1_i2c2_default>; |
| 1539 |
pinctrl-1 = <&blsp1_i2c2_sleep>; |
| 1540 |
pinctrl-names = "default", |
| 1541 |
"sleep"; |
| 1542 |
#address-cells = <1>; |
| 1543 |
#size-cells = <0>; |
| 1544 |
status = "disabled"; |
| 1545 |
}; |
| 1546 |
|
| 1547 |
blsp1_i2c3: i2c@78b7000 { |
| 1548 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 1549 |
reg = <0x078b7000 0x600>; |
| 1550 |
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| 1551 |
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, |
| 1552 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1553 |
clock-names = "core", |
| 1554 |
"iface"; |
| 1555 |
dmas = <&blsp1_dma 8>, |
| 1556 |
<&blsp1_dma 9>; |
| 1557 |
dma-names = "tx", |
| 1558 |
"rx"; |
| 1559 |
pinctrl-0 = <&blsp1_i2c3_default>; |
| 1560 |
pinctrl-1 = <&blsp1_i2c3_sleep>; |
| 1561 |
pinctrl-names = "default", |
| 1562 |
"sleep"; |
| 1563 |
#address-cells = <1>; |
| 1564 |
#size-cells = <0>; |
| 1565 |
status = "disabled"; |
| 1566 |
}; |
| 1567 |
|
| 1568 |
blsp1_spi3: spi@78b7000 { |
| 1569 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 1570 |
reg = <0x078b7000 0x600>; |
| 1571 |
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| 1572 |
clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, |
| 1573 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1574 |
clock-names = "core", |
| 1575 |
"iface"; |
| 1576 |
dmas = <&blsp1_dma 8>, |
| 1577 |
<&blsp1_dma 9>; |
| 1578 |
dma-names = "tx", |
| 1579 |
"rx"; |
| 1580 |
pinctrl-0 = <&blsp1_spi3_default>; |
| 1581 |
pinctrl-1 = <&blsp1_spi3_sleep>; |
| 1582 |
pinctrl-names = "default", |
| 1583 |
"sleep"; |
| 1584 |
#address-cells = <1>; |
| 1585 |
#size-cells = <0>; |
| 1586 |
status = "disabled"; |
| 1587 |
}; |
| 1588 |
|
| 1589 |
blsp1_i2c4: i2c@78b8000 { |
| 1590 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 1591 |
reg = <0x078b8000 0x500>; |
| 1592 |
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| 1593 |
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, |
| 1594 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 1595 |
clock-names = "core", |
| 1596 |
"iface"; |
| 1597 |
dmas = <&blsp1_dma 10>, |
| 1598 |
<&blsp1_dma 11>; |
| 1599 |
dma-names = "tx", |
| 1600 |
"rx"; |
| 1601 |
pinctrl-0 = <&blsp1_i2c4_default>; |
| 1602 |
pinctrl-1 = <&blsp1_i2c4_sleep>; |
| 1603 |
pinctrl-names = "default", |
| 1604 |
"sleep"; |
| 1605 |
#address-cells = <1>; |
| 1606 |
#size-cells = <0>; |
| 1607 |
status = "disabled"; |
| 1608 |
}; |
| 1609 |
|
| 1610 |
blsp2_dma: dma-controller@7ac4000 { |
| 1611 |
compatible = "qcom,bam-v1.7.0"; |
| 1612 |
reg = <0x07ac4000 0x1d000>; |
| 1613 |
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; |
| 1614 |
clocks = <&gcc GCC_BLSP2_AHB_CLK>; |
| 1615 |
clock-names = "bam_clk"; |
| 1616 |
qcom,controlled-remotely; |
| 1617 |
#dma-cells = <1>; |
| 1618 |
num-channels = <10>; |
| 1619 |
qcom,num-ees = <4>; |
| 1620 |
qcom,ee = <0>; |
| 1621 |
}; |
| 1622 |
|
| 1623 |
blsp2_i2c1: i2c@7af5000 { |
| 1624 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 1625 |
reg = <0x07af5000 0x600>; |
| 1626 |
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; |
| 1627 |
clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, |
| 1628 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 1629 |
clock-names = "core", |
| 1630 |
"iface"; |
| 1631 |
dmas = <&blsp2_dma 4>, |
| 1632 |
<&blsp2_dma 5>; |
| 1633 |
dma-names = "tx", |
| 1634 |
"rx"; |
| 1635 |
pinctrl-0 = <&blsp2_i2c1_default>; |
| 1636 |
pinctrl-1 = <&blsp2_i2c1_sleep>; |
| 1637 |
pinctrl-names = "default", |
| 1638 |
"sleep"; |
| 1639 |
#address-cells = <1>; |
| 1640 |
#size-cells = <0>; |
| 1641 |
status = "disabled"; |
| 1642 |
}; |
| 1643 |
|
| 1644 |
blsp2_spi2: spi@7af6000 { |
| 1645 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 1646 |
reg = <0x07af6000 0x600>; |
| 1647 |
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; |
| 1648 |
clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, |
| 1649 |
<&gcc GCC_BLSP2_AHB_CLK>; |
| 1650 |
clock-names = "core", |
| 1651 |
"iface"; |
| 1652 |
dmas = <&blsp2_dma 6>, |
| 1653 |
<&blsp2_dma 7>; |
| 1654 |
dma-names = "tx", |
| 1655 |
"rx"; |
| 1656 |
pinctrl-0 = <&blsp2_spi2_default>; |
| 1657 |
pinctrl-1 = <&blsp2_spi2_sleep>; |
| 1658 |
pinctrl-names = "default", |
| 1659 |
"sleep"; |
| 1660 |
#address-cells = <1>; |
| 1661 |
#size-cells = <0>; |
| 1662 |
status = "disabled"; |
| 1663 |
}; |
| 1664 |
|
| 1665 |
usb: usb@78db000 { |
| 1666 |
compatible = "qcom,ci-hdrc"; |
| 1667 |
reg = <0x078db000 0x200>, |
| 1668 |
<0x078db200 0x200>; |
| 1669 |
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| 1670 |
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; |
| 1671 |
clocks = <&gcc GCC_USB_HS_AHB_CLK>, |
| 1672 |
<&gcc GCC_USB_HS_SYSTEM_CLK>; |
| 1673 |
clock-names = "iface", |
| 1674 |
"core"; |
| 1675 |
assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; |
| 1676 |
assigned-clock-rates = <80000000>; |
| 1677 |
resets = <&gcc GCC_USB_HS_BCR>; |
| 1678 |
reset-names = "core"; |
| 1679 |
phy_type = "ulpi"; |
| 1680 |
dr_mode = "otg"; |
| 1681 |
hnp-disable; |
| 1682 |
srp-disable; |
| 1683 |
adp-disable; |
| 1684 |
ahb-burst-config = <0>; |
| 1685 |
phy-names = "usb-phy"; |
| 1686 |
phys = <&usb_hs_phy>; |
| 1687 |
status = "disabled"; |
| 1688 |
#reset-cells = <1>; |
| 1689 |
}; |
| 1690 |
|
| 1691 |
wcnss: remoteproc@a204000 { |
| 1692 |
compatible = "qcom,pronto-v3-pil", "qcom,pronto"; |
| 1693 |
reg = <0x0a204000 0x2000>, |
| 1694 |
<0x0a202000 0x1000>, |
| 1695 |
<0x0a21b000 0x3000>; |
| 1696 |
reg-names = "ccu", |
| 1697 |
"dxe", |
| 1698 |
"pmu"; |
| 1699 |
|
| 1700 |
memory-region = <&wcnss_mem>; |
| 1701 |
|
| 1702 |
interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, |
| 1703 |
<&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| 1704 |
<&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| 1705 |
<&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| 1706 |
<&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| 1707 |
interrupt-names = "wdog", |
| 1708 |
"fatal", |
| 1709 |
"ready", |
| 1710 |
"handover", |
| 1711 |
"stop-ack"; |
| 1712 |
|
| 1713 |
power-domains = <&rpmpd RPMPD_VDDCX>, |
| 1714 |
<&rpmpd RPMPD_VDDMX>; |
| 1715 |
power-domain-names = "cx", |
| 1716 |
"mx"; |
| 1717 |
|
| 1718 |
qcom,smem-states = <&wcnss_smp2p_out 0>; |
| 1719 |
qcom,smem-state-names = "stop"; |
| 1720 |
|
| 1721 |
pinctrl-0 = <&wcnss_pin_a>; |
| 1722 |
pinctrl-names = "default"; |
| 1723 |
|
| 1724 |
status = "disabled"; |
| 1725 |
|
| 1726 |
wcnss_iris: iris { |
| 1727 |
clocks = <&rpmcc RPM_SMD_RF_CLK2>; |
| 1728 |
clock-names = "xo"; |
| 1729 |
}; |
| 1730 |
|
| 1731 |
smd-edge { |
| 1732 |
interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; |
| 1733 |
|
| 1734 |
mboxes = <&apcs1 17>; |
| 1735 |
qcom,smd-edge = <6>; |
| 1736 |
qcom,remote-pid = <4>; |
| 1737 |
|
| 1738 |
label = "pronto"; |
| 1739 |
|
| 1740 |
wcnss_ctrl: wcnss { |
| 1741 |
compatible = "qcom,wcnss"; |
| 1742 |
qcom,smd-channels = "WCNSS_CTRL"; |
| 1743 |
|
| 1744 |
qcom,mmio = <&wcnss>; |
| 1745 |
|
| 1746 |
wcnss_bt: bluetooth { |
| 1747 |
compatible = "qcom,wcnss-bt"; |
| 1748 |
}; |
| 1749 |
|
| 1750 |
wcnss_wifi: wifi { |
| 1751 |
compatible = "qcom,wcnss-wlan"; |
| 1752 |
|
| 1753 |
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| 1754 |
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; |
| 1755 |
interrupt-names = "tx", |
| 1756 |
"rx"; |
| 1757 |
|
| 1758 |
qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; |
| 1759 |
qcom,smem-state-names = "tx-enable", |
| 1760 |
"tx-rings-empty"; |
| 1761 |
}; |
| 1762 |
}; |
| 1763 |
}; |
| 1764 |
}; |
| 1765 |
|
| 1766 |
intc: interrupt-controller@b000000 { |
| 1767 |
compatible = "qcom,msm-qgic2"; |
| 1768 |
interrupt-controller; |
| 1769 |
#interrupt-cells = <3>; |
| 1770 |
reg = <0x0b000000 0x1000>, |
| 1771 |
<0x0b002000 0x1000>; |
| 1772 |
}; |
| 1773 |
|
| 1774 |
apcs1: mailbox@b011000 { |
| 1775 |
compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; |
| 1776 |
reg = <0x0b011000 0x1000>; |
| 1777 |
#mbox-cells = <1>; |
| 1778 |
}; |
| 1779 |
|
| 1780 |
watchdog@b017000 { |
| 1781 |
compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt"; |
| 1782 |
reg = <0x0b017000 0x1000>; |
| 1783 |
clocks = <&sleep_clk>; |
| 1784 |
}; |
| 1785 |
|
| 1786 |
timer@b120000 { |
| 1787 |
compatible = "arm,armv7-timer-mem"; |
| 1788 |
reg = <0x0b120000 0x1000>; |
| 1789 |
ranges; |
| 1790 |
#address-cells = <1>; |
| 1791 |
#size-cells = <1>; |
| 1792 |
|
| 1793 |
frame@b121000 { |
| 1794 |
reg = <0x0b121000 0x1000>, |
| 1795 |
<0x0b122000 0x1000>; |
| 1796 |
frame-number = <0>; |
| 1797 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 1798 |
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 1799 |
}; |
| 1800 |
|
| 1801 |
frame@b123000 { |
| 1802 |
reg = <0x0b123000 0x1000>; |
| 1803 |
frame-number = <1>; |
| 1804 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 1805 |
status = "disabled"; |
| 1806 |
}; |
| 1807 |
|
| 1808 |
frame@b124000 { |
| 1809 |
reg = <0x0b124000 0x1000>; |
| 1810 |
frame-number = <2>; |
| 1811 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 1812 |
status = "disabled"; |
| 1813 |
}; |
| 1814 |
|
| 1815 |
frame@b125000 { |
| 1816 |
reg = <0x0b125000 0x1000>; |
| 1817 |
frame-number = <3>; |
| 1818 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 1819 |
status = "disabled"; |
| 1820 |
}; |
| 1821 |
|
| 1822 |
frame@b126000 { |
| 1823 |
reg = <0x0b126000 0x1000>; |
| 1824 |
frame-number = <4>; |
| 1825 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 1826 |
status = "disabled"; |
| 1827 |
}; |
| 1828 |
|
| 1829 |
frame@b127000 { |
| 1830 |
reg = <0x0b127000 0x1000>; |
| 1831 |
frame-number = <5>; |
| 1832 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 1833 |
status = "disabled"; |
| 1834 |
}; |
| 1835 |
|
| 1836 |
frame@b128000 { |
| 1837 |
reg = <0x0b128000 0x1000>; |
| 1838 |
frame-number = <6>; |
| 1839 |
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 1840 |
status = "disabled"; |
| 1841 |
}; |
| 1842 |
}; |
| 1843 |
}; |
| 1844 |
|
| 1845 |
thermal_zones: thermal-zones { |
| 1846 |
aoss-thermal { |
| 1847 |
thermal-sensors = <&tsens 0>; |
| 1848 |
|
| 1849 |
trips { |
| 1850 |
aoss_alert0: trip-point0 { |
| 1851 |
temperature = <85000>; |
| 1852 |
hysteresis = <2000>; |
| 1853 |
type = "critical"; |
| 1854 |
}; |
| 1855 |
}; |
| 1856 |
}; |
| 1857 |
|
| 1858 |
mdm-core-thermal { |
| 1859 |
thermal-sensors = <&tsens 1>; |
| 1860 |
|
| 1861 |
trips { |
| 1862 |
mdm_core_alert0: trip-point0 { |
| 1863 |
temperature = <85000>; |
| 1864 |
hysteresis = <2000>; |
| 1865 |
type = "critical"; |
| 1866 |
}; |
| 1867 |
}; |
| 1868 |
}; |
| 1869 |
|
| 1870 |
q6-thermal { |
| 1871 |
thermal-sensors = <&tsens 2>; |
| 1872 |
|
| 1873 |
trips { |
| 1874 |
q6_alert0: trip-point0 { |
| 1875 |
temperature = <85000>; |
| 1876 |
hysteresis = <2000>; |
| 1877 |
type = "critical"; |
| 1878 |
}; |
| 1879 |
}; |
| 1880 |
}; |
| 1881 |
|
| 1882 |
camera-thermal { |
| 1883 |
thermal-sensors = <&tsens 3>; |
| 1884 |
|
| 1885 |
trips { |
| 1886 |
camera_alert0: trip-point0 { |
| 1887 |
temperature = <85000>; |
| 1888 |
hysteresis = <2000>; |
| 1889 |
type = "critical"; |
| 1890 |
}; |
| 1891 |
}; |
| 1892 |
}; |
| 1893 |
|
| 1894 |
cpuss1-thermal { |
| 1895 |
thermal-sensors = <&tsens 4>; |
| 1896 |
|
| 1897 |
cooling-maps { |
| 1898 |
map0 { |
| 1899 |
trip = <&cpuss1_alert0>; |
| 1900 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1901 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1902 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1903 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 1904 |
}; |
| 1905 |
}; |
| 1906 |
|
| 1907 |
trips { |
| 1908 |
cpuss1_alert0: trip-point0 { |
| 1909 |
temperature = <75000>; |
| 1910 |
hysteresis = <2000>; |
| 1911 |
type = "passive"; |
| 1912 |
}; |
| 1913 |
|
| 1914 |
cpuss1_alert1: trip-point1 { |
| 1915 |
temperature = <85000>; |
| 1916 |
hysteresis = <2000>; |
| 1917 |
type = "hot"; |
| 1918 |
}; |
| 1919 |
|
| 1920 |
cpuss1_crit: cpuss1-crit { |
| 1921 |
temperature = <100000>; |
| 1922 |
hysteresis = <2000>; |
| 1923 |
type = "critical"; |
| 1924 |
}; |
| 1925 |
}; |
| 1926 |
}; |
| 1927 |
|
| 1928 |
cpu4-thermal { |
| 1929 |
thermal-sensors = <&tsens 5>; |
| 1930 |
|
| 1931 |
cooling-maps { |
| 1932 |
map0 { |
| 1933 |
trip = <&cpu4_alert1>; |
| 1934 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1935 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1936 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1937 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 1938 |
}; |
| 1939 |
}; |
| 1940 |
|
| 1941 |
trips { |
| 1942 |
cpu4_alert0: trip-point0 { |
| 1943 |
temperature = <75000>; |
| 1944 |
hysteresis = <2000>; |
| 1945 |
type = "passive"; |
| 1946 |
}; |
| 1947 |
|
| 1948 |
cpu4_alert1: trip-point1 { |
| 1949 |
temperature = <85000>; |
| 1950 |
hysteresis = <2000>; |
| 1951 |
type = "hot"; |
| 1952 |
}; |
| 1953 |
|
| 1954 |
cpu4_crit: cpu-crit { |
| 1955 |
temperature = <100000>; |
| 1956 |
hysteresis = <2000>; |
| 1957 |
type = "critical"; |
| 1958 |
}; |
| 1959 |
}; |
| 1960 |
}; |
| 1961 |
|
| 1962 |
cpu5-thermal { |
| 1963 |
thermal-sensors = <&tsens 6>; |
| 1964 |
|
| 1965 |
cooling-maps { |
| 1966 |
map0 { |
| 1967 |
trip = <&cpu5_alert1>; |
| 1968 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1969 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1970 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1971 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 1972 |
}; |
| 1973 |
}; |
| 1974 |
|
| 1975 |
trips { |
| 1976 |
cpu5_alert0: trip-point0 { |
| 1977 |
temperature = <75000>; |
| 1978 |
hysteresis = <2000>; |
| 1979 |
type = "hot"; |
| 1980 |
}; |
| 1981 |
|
| 1982 |
cpu5_alert1: trip-point1 { |
| 1983 |
temperature = <85000>; |
| 1984 |
hysteresis = <2000>; |
| 1985 |
type = "passive"; |
| 1986 |
}; |
| 1987 |
|
| 1988 |
cpu5_crit: cpu-crit { |
| 1989 |
temperature = <100000>; |
| 1990 |
hysteresis = <2000>; |
| 1991 |
type = "critical"; |
| 1992 |
}; |
| 1993 |
}; |
| 1994 |
}; |
| 1995 |
|
| 1996 |
cpu6-thermal { |
| 1997 |
thermal-sensors = <&tsens 7>; |
| 1998 |
|
| 1999 |
cooling-maps { |
| 2000 |
map0 { |
| 2001 |
trip = <&cpu6_alert1>; |
| 2002 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2003 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2004 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2005 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 2006 |
}; |
| 2007 |
}; |
| 2008 |
|
| 2009 |
trips { |
| 2010 |
cpu6_alert0: trip-point0 { |
| 2011 |
temperature = <75000>; |
| 2012 |
hysteresis = <2000>; |
| 2013 |
type = "hot"; |
| 2014 |
}; |
| 2015 |
|
| 2016 |
cpu6_alert1: trip-point1 { |
| 2017 |
temperature = <85000>; |
| 2018 |
hysteresis = <2000>; |
| 2019 |
type = "passive"; |
| 2020 |
}; |
| 2021 |
|
| 2022 |
cpu6_crit: cpu-crit { |
| 2023 |
temperature = <100000>; |
| 2024 |
hysteresis = <2000>; |
| 2025 |
type = "critical"; |
| 2026 |
}; |
| 2027 |
}; |
| 2028 |
}; |
| 2029 |
|
| 2030 |
cpu7-thermal { |
| 2031 |
thermal-sensors = <&tsens 8>; |
| 2032 |
|
| 2033 |
cooling-maps { |
| 2034 |
map0 { |
| 2035 |
trip = <&cpu7_alert1>; |
| 2036 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2037 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2038 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2039 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 2040 |
}; |
| 2041 |
}; |
| 2042 |
|
| 2043 |
trips { |
| 2044 |
cpu7_alert0: trip-point0 { |
| 2045 |
temperature = <75000>; |
| 2046 |
hysteresis = <2000>; |
| 2047 |
type = "hot"; |
| 2048 |
}; |
| 2049 |
|
| 2050 |
cpu7_alert1: trip-point1 { |
| 2051 |
temperature = <85000>; |
| 2052 |
hysteresis = <2000>; |
| 2053 |
type = "passive"; |
| 2054 |
}; |
| 2055 |
|
| 2056 |
cpu7_crit: cpu-crit { |
| 2057 |
temperature = <100000>; |
| 2058 |
hysteresis = <2000>; |
| 2059 |
type = "critical"; |
| 2060 |
}; |
| 2061 |
}; |
| 2062 |
}; |
| 2063 |
|
| 2064 |
cpuss0-thermal { |
| 2065 |
thermal-sensors = <&tsens 9>; |
| 2066 |
|
| 2067 |
cooling-maps { |
| 2068 |
map0 { |
| 2069 |
trip = <&cpuss0_alert0>; |
| 2070 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2071 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2072 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2073 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 2074 |
}; |
| 2075 |
}; |
| 2076 |
|
| 2077 |
trips { |
| 2078 |
cpuss0_alert0: trip-point0 { |
| 2079 |
temperature = <75000>; |
| 2080 |
hysteresis = <2000>; |
| 2081 |
type = "passive"; |
| 2082 |
}; |
| 2083 |
|
| 2084 |
cpuss0_alert1: trip-point1 { |
| 2085 |
temperature = <85000>; |
| 2086 |
hysteresis = <2000>; |
| 2087 |
type = "hot"; |
| 2088 |
}; |
| 2089 |
|
| 2090 |
cpuss0_crit: cpuss0-crit { |
| 2091 |
temperature = <100000>; |
| 2092 |
hysteresis = <2000>; |
| 2093 |
type = "critical"; |
| 2094 |
}; |
| 2095 |
}; |
| 2096 |
}; |
| 2097 |
|
| 2098 |
gpu-thermal { |
| 2099 |
polling-delay-passive = <250>; |
| 2100 |
|
| 2101 |
thermal-sensors = <&tsens 10>; |
| 2102 |
|
| 2103 |
cooling-maps { |
| 2104 |
map0 { |
| 2105 |
trip = <&gpu_alert>; |
| 2106 |
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 2107 |
}; |
| 2108 |
}; |
| 2109 |
|
| 2110 |
trips { |
| 2111 |
gpu_alert: trip-point0 { |
| 2112 |
temperature = <70000>; |
| 2113 |
hysteresis = <2000>; |
| 2114 |
type = "passive"; |
| 2115 |
}; |
| 2116 |
|
| 2117 |
gpu_crit: gpu-crit { |
| 2118 |
temperature = <90000>; |
| 2119 |
hysteresis = <2000>; |
| 2120 |
type = "critical"; |
| 2121 |
}; |
| 2122 |
}; |
| 2123 |
}; |
| 2124 |
}; |
| 2125 |
|
| 2126 |
timer { |
| 2127 |
compatible = "arm,armv8-timer"; |
| 2128 |
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 2129 |
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 2130 |
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 2131 |
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| 2132 |
}; |
| 2133 |
}; |
| 2134 |
|