| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/arm/coresight-cti-dt.h> |
| 7 |
#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> |
| 8 |
#include <dt-bindings/clock/qcom,gcc-msm8916.h> |
| 9 |
#include <dt-bindings/clock/qcom,rpmcc.h> |
| 10 |
#include <dt-bindings/interconnect/qcom,msm8916.h> |
| 11 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 12 |
#include <dt-bindings/power/qcom-rpmpd.h> |
| 13 |
#include <dt-bindings/reset/qcom,gcc-msm8916.h> |
| 14 |
#include <dt-bindings/soc/qcom,apr.h> |
| 15 |
#include <dt-bindings/thermal/thermal.h> |
| 16 |
|
| 17 |
/ { |
| 18 |
interrupt-parent = <&intc>; |
| 19 |
|
| 20 |
#address-cells = <2>; |
| 21 |
#size-cells = <2>; |
| 22 |
|
| 23 |
chosen { }; |
| 24 |
|
| 25 |
memory@80000000 { |
| 26 |
device_type = "memory"; |
| 27 |
/* We expect the bootloader to fill in the reg */ |
| 28 |
reg = <0 0x80000000 0 0>; |
| 29 |
}; |
| 30 |
|
| 31 |
reserved-memory { |
| 32 |
#address-cells = <2>; |
| 33 |
#size-cells = <2>; |
| 34 |
ranges; |
| 35 |
|
| 36 |
tz-apps@86000000 { |
| 37 |
reg = <0x0 0x86000000 0x0 0x300000>; |
| 38 |
no-map; |
| 39 |
}; |
| 40 |
|
| 41 |
smem@86300000 { |
| 42 |
compatible = "qcom,smem"; |
| 43 |
reg = <0x0 0x86300000 0x0 0x100000>; |
| 44 |
no-map; |
| 45 |
|
| 46 |
hwlocks = <&tcsr_mutex 3>; |
| 47 |
qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| 48 |
}; |
| 49 |
|
| 50 |
hypervisor@86400000 { |
| 51 |
reg = <0x0 0x86400000 0x0 0x100000>; |
| 52 |
no-map; |
| 53 |
}; |
| 54 |
|
| 55 |
tz@86500000 { |
| 56 |
reg = <0x0 0x86500000 0x0 0x180000>; |
| 57 |
no-map; |
| 58 |
}; |
| 59 |
|
| 60 |
reserved@86680000 { |
| 61 |
reg = <0x0 0x86680000 0x0 0x80000>; |
| 62 |
no-map; |
| 63 |
}; |
| 64 |
|
| 65 |
rmtfs@86700000 { |
| 66 |
compatible = "qcom,rmtfs-mem"; |
| 67 |
reg = <0x0 0x86700000 0x0 0xe0000>; |
| 68 |
no-map; |
| 69 |
|
| 70 |
qcom,client-id = <1>; |
| 71 |
}; |
| 72 |
|
| 73 |
rfsa@867e0000 { |
| 74 |
reg = <0x0 0x867e0000 0x0 0x20000>; |
| 75 |
no-map; |
| 76 |
}; |
| 77 |
|
| 78 |
mpss_mem: mpss@86800000 { |
| 79 |
/* |
| 80 |
* The memory region for the mpss firmware is generally |
| 81 |
* relocatable and could be allocated dynamically. |
| 82 |
* However, many firmware versions tend to fail when |
| 83 |
* loaded to some special addresses, so it is hard to |
| 84 |
* define reliable alloc-ranges. |
| 85 |
* |
| 86 |
* alignment = <0x0 0x400000>; |
| 87 |
* alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; |
| 88 |
*/ |
| 89 |
reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */ |
| 90 |
no-map; |
| 91 |
status = "disabled"; |
| 92 |
}; |
| 93 |
|
| 94 |
wcnss_mem: wcnss { |
| 95 |
size = <0x0 0x600000>; |
| 96 |
alignment = <0x0 0x100000>; |
| 97 |
alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; |
| 98 |
no-map; |
| 99 |
status = "disabled"; |
| 100 |
}; |
| 101 |
|
| 102 |
venus_mem: venus { |
| 103 |
size = <0x0 0x500000>; |
| 104 |
alignment = <0x0 0x100000>; |
| 105 |
alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; |
| 106 |
no-map; |
| 107 |
status = "disabled"; |
| 108 |
}; |
| 109 |
|
| 110 |
mba_mem: mba { |
| 111 |
size = <0x0 0x100000>; |
| 112 |
alignment = <0x0 0x100000>; |
| 113 |
alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; |
| 114 |
no-map; |
| 115 |
status = "disabled"; |
| 116 |
}; |
| 117 |
}; |
| 118 |
|
| 119 |
clocks { |
| 120 |
xo_board: xo-board { |
| 121 |
compatible = "fixed-clock"; |
| 122 |
#clock-cells = <0>; |
| 123 |
clock-frequency = <19200000>; |
| 124 |
}; |
| 125 |
|
| 126 |
sleep_clk: sleep-clk { |
| 127 |
compatible = "fixed-clock"; |
| 128 |
#clock-cells = <0>; |
| 129 |
clock-frequency = <32764>; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
cpus { |
| 134 |
#address-cells = <1>; |
| 135 |
#size-cells = <0>; |
| 136 |
|
| 137 |
cpu0: cpu@0 { |
| 138 |
device_type = "cpu"; |
| 139 |
compatible = "arm,cortex-a53"; |
| 140 |
reg = <0x0>; |
| 141 |
next-level-cache = <&l2_0>; |
| 142 |
enable-method = "psci"; |
| 143 |
clocks = <&apcs>; |
| 144 |
operating-points-v2 = <&cpu_opp_table>; |
| 145 |
#cooling-cells = <2>; |
| 146 |
power-domains = <&cpu_pd0>; |
| 147 |
power-domain-names = "psci"; |
| 148 |
qcom,acc = <&cpu0_acc>; |
| 149 |
qcom,saw = <&cpu0_saw>; |
| 150 |
}; |
| 151 |
|
| 152 |
cpu1: cpu@1 { |
| 153 |
device_type = "cpu"; |
| 154 |
compatible = "arm,cortex-a53"; |
| 155 |
reg = <0x1>; |
| 156 |
next-level-cache = <&l2_0>; |
| 157 |
enable-method = "psci"; |
| 158 |
clocks = <&apcs>; |
| 159 |
operating-points-v2 = <&cpu_opp_table>; |
| 160 |
#cooling-cells = <2>; |
| 161 |
power-domains = <&cpu_pd1>; |
| 162 |
power-domain-names = "psci"; |
| 163 |
qcom,acc = <&cpu1_acc>; |
| 164 |
qcom,saw = <&cpu1_saw>; |
| 165 |
}; |
| 166 |
|
| 167 |
cpu2: cpu@2 { |
| 168 |
device_type = "cpu"; |
| 169 |
compatible = "arm,cortex-a53"; |
| 170 |
reg = <0x2>; |
| 171 |
next-level-cache = <&l2_0>; |
| 172 |
enable-method = "psci"; |
| 173 |
clocks = <&apcs>; |
| 174 |
operating-points-v2 = <&cpu_opp_table>; |
| 175 |
#cooling-cells = <2>; |
| 176 |
power-domains = <&cpu_pd2>; |
| 177 |
power-domain-names = "psci"; |
| 178 |
qcom,acc = <&cpu2_acc>; |
| 179 |
qcom,saw = <&cpu2_saw>; |
| 180 |
}; |
| 181 |
|
| 182 |
cpu3: cpu@3 { |
| 183 |
device_type = "cpu"; |
| 184 |
compatible = "arm,cortex-a53"; |
| 185 |
reg = <0x3>; |
| 186 |
next-level-cache = <&l2_0>; |
| 187 |
enable-method = "psci"; |
| 188 |
clocks = <&apcs>; |
| 189 |
operating-points-v2 = <&cpu_opp_table>; |
| 190 |
#cooling-cells = <2>; |
| 191 |
power-domains = <&cpu_pd3>; |
| 192 |
power-domain-names = "psci"; |
| 193 |
qcom,acc = <&cpu3_acc>; |
| 194 |
qcom,saw = <&cpu3_saw>; |
| 195 |
}; |
| 196 |
|
| 197 |
l2_0: l2-cache { |
| 198 |
compatible = "cache"; |
| 199 |
cache-level = <2>; |
| 200 |
cache-unified; |
| 201 |
}; |
| 202 |
|
| 203 |
idle-states { |
| 204 |
entry-method = "psci"; |
| 205 |
|
| 206 |
cpu_sleep_0: cpu-sleep-0 { |
| 207 |
compatible = "arm,idle-state"; |
| 208 |
idle-state-name = "standalone-power-collapse"; |
| 209 |
arm,psci-suspend-param = <0x40000002>; |
| 210 |
entry-latency-us = <130>; |
| 211 |
exit-latency-us = <150>; |
| 212 |
min-residency-us = <2000>; |
| 213 |
local-timer-stop; |
| 214 |
}; |
| 215 |
}; |
| 216 |
|
| 217 |
domain-idle-states { |
| 218 |
|
| 219 |
cluster_ret: cluster-retention { |
| 220 |
compatible = "domain-idle-state"; |
| 221 |
arm,psci-suspend-param = <0x41000012>; |
| 222 |
entry-latency-us = <500>; |
| 223 |
exit-latency-us = <500>; |
| 224 |
min-residency-us = <2000>; |
| 225 |
}; |
| 226 |
|
| 227 |
cluster_pwrdn: cluster-gdhs { |
| 228 |
compatible = "domain-idle-state"; |
| 229 |
arm,psci-suspend-param = <0x41000032>; |
| 230 |
entry-latency-us = <2000>; |
| 231 |
exit-latency-us = <2000>; |
| 232 |
min-residency-us = <6000>; |
| 233 |
}; |
| 234 |
}; |
| 235 |
}; |
| 236 |
|
| 237 |
cpu_opp_table: opp-table-cpu { |
| 238 |
compatible = "operating-points-v2"; |
| 239 |
opp-shared; |
| 240 |
|
| 241 |
opp-200000000 { |
| 242 |
opp-hz = /bits/ 64 <200000000>; |
| 243 |
}; |
| 244 |
opp-400000000 { |
| 245 |
opp-hz = /bits/ 64 <400000000>; |
| 246 |
}; |
| 247 |
opp-800000000 { |
| 248 |
opp-hz = /bits/ 64 <800000000>; |
| 249 |
}; |
| 250 |
opp-998400000 { |
| 251 |
opp-hz = /bits/ 64 <998400000>; |
| 252 |
}; |
| 253 |
}; |
| 254 |
|
| 255 |
firmware { |
| 256 |
scm: scm { |
| 257 |
compatible = "qcom,scm-msm8916", "qcom,scm"; |
| 258 |
clocks = <&gcc GCC_CRYPTO_CLK>, |
| 259 |
<&gcc GCC_CRYPTO_AXI_CLK>, |
| 260 |
<&gcc GCC_CRYPTO_AHB_CLK>; |
| 261 |
clock-names = "core", "bus", "iface"; |
| 262 |
#reset-cells = <1>; |
| 263 |
|
| 264 |
qcom,dload-mode = <&tcsr 0x6100>; |
| 265 |
}; |
| 266 |
}; |
| 267 |
|
| 268 |
pmu { |
| 269 |
compatible = "arm,cortex-a53-pmu"; |
| 270 |
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 271 |
}; |
| 272 |
|
| 273 |
psci { |
| 274 |
compatible = "arm,psci-1.0"; |
| 275 |
method = "smc"; |
| 276 |
|
| 277 |
cpu_pd0: power-domain-cpu0 { |
| 278 |
#power-domain-cells = <0>; |
| 279 |
power-domains = <&cluster_pd>; |
| 280 |
domain-idle-states = <&cpu_sleep_0>; |
| 281 |
}; |
| 282 |
|
| 283 |
cpu_pd1: power-domain-cpu1 { |
| 284 |
#power-domain-cells = <0>; |
| 285 |
power-domains = <&cluster_pd>; |
| 286 |
domain-idle-states = <&cpu_sleep_0>; |
| 287 |
}; |
| 288 |
|
| 289 |
cpu_pd2: power-domain-cpu2 { |
| 290 |
#power-domain-cells = <0>; |
| 291 |
power-domains = <&cluster_pd>; |
| 292 |
domain-idle-states = <&cpu_sleep_0>; |
| 293 |
}; |
| 294 |
|
| 295 |
cpu_pd3: power-domain-cpu3 { |
| 296 |
#power-domain-cells = <0>; |
| 297 |
power-domains = <&cluster_pd>; |
| 298 |
domain-idle-states = <&cpu_sleep_0>; |
| 299 |
}; |
| 300 |
|
| 301 |
cluster_pd: power-domain-cluster { |
| 302 |
#power-domain-cells = <0>; |
| 303 |
domain-idle-states = <&cluster_ret>, <&cluster_pwrdn>; |
| 304 |
}; |
| 305 |
}; |
| 306 |
|
| 307 |
rpm: remoteproc { |
| 308 |
compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc"; |
| 309 |
|
| 310 |
smd-edge { |
| 311 |
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; |
| 312 |
mboxes = <&apcs 0>; |
| 313 |
qcom,smd-edge = <15>; |
| 314 |
|
| 315 |
rpm_requests: rpm-requests { |
| 316 |
compatible = "qcom,rpm-msm8916", "qcom,smd-rpm"; |
| 317 |
qcom,smd-channels = "rpm_requests"; |
| 318 |
|
| 319 |
rpmcc: clock-controller { |
| 320 |
compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; |
| 321 |
#clock-cells = <1>; |
| 322 |
clocks = <&xo_board>; |
| 323 |
clock-names = "xo"; |
| 324 |
}; |
| 325 |
|
| 326 |
rpmpd: power-controller { |
| 327 |
compatible = "qcom,msm8916-rpmpd"; |
| 328 |
#power-domain-cells = <1>; |
| 329 |
operating-points-v2 = <&rpmpd_opp_table>; |
| 330 |
|
| 331 |
rpmpd_opp_table: opp-table { |
| 332 |
compatible = "operating-points-v2"; |
| 333 |
|
| 334 |
rpmpd_opp_ret: opp1 { |
| 335 |
opp-level = <1>; |
| 336 |
}; |
| 337 |
rpmpd_opp_svs_krait: opp2 { |
| 338 |
opp-level = <2>; |
| 339 |
}; |
| 340 |
rpmpd_opp_svs_soc: opp3 { |
| 341 |
opp-level = <3>; |
| 342 |
}; |
| 343 |
rpmpd_opp_nom: opp4 { |
| 344 |
opp-level = <4>; |
| 345 |
}; |
| 346 |
rpmpd_opp_turbo: opp5 { |
| 347 |
opp-level = <5>; |
| 348 |
}; |
| 349 |
rpmpd_opp_super_turbo: opp6 { |
| 350 |
opp-level = <6>; |
| 351 |
}; |
| 352 |
}; |
| 353 |
}; |
| 354 |
}; |
| 355 |
}; |
| 356 |
}; |
| 357 |
|
| 358 |
smp2p-hexagon { |
| 359 |
compatible = "qcom,smp2p"; |
| 360 |
qcom,smem = <435>, <428>; |
| 361 |
|
| 362 |
interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; |
| 363 |
|
| 364 |
mboxes = <&apcs 14>; |
| 365 |
|
| 366 |
qcom,local-pid = <0>; |
| 367 |
qcom,remote-pid = <1>; |
| 368 |
|
| 369 |
hexagon_smp2p_out: master-kernel { |
| 370 |
qcom,entry-name = "master-kernel"; |
| 371 |
|
| 372 |
#qcom,smem-state-cells = <1>; |
| 373 |
}; |
| 374 |
|
| 375 |
hexagon_smp2p_in: slave-kernel { |
| 376 |
qcom,entry-name = "slave-kernel"; |
| 377 |
|
| 378 |
interrupt-controller; |
| 379 |
#interrupt-cells = <2>; |
| 380 |
}; |
| 381 |
}; |
| 382 |
|
| 383 |
smp2p-wcnss { |
| 384 |
compatible = "qcom,smp2p"; |
| 385 |
qcom,smem = <451>, <431>; |
| 386 |
|
| 387 |
interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; |
| 388 |
|
| 389 |
mboxes = <&apcs 18>; |
| 390 |
|
| 391 |
qcom,local-pid = <0>; |
| 392 |
qcom,remote-pid = <4>; |
| 393 |
|
| 394 |
wcnss_smp2p_out: master-kernel { |
| 395 |
qcom,entry-name = "master-kernel"; |
| 396 |
|
| 397 |
#qcom,smem-state-cells = <1>; |
| 398 |
}; |
| 399 |
|
| 400 |
wcnss_smp2p_in: slave-kernel { |
| 401 |
qcom,entry-name = "slave-kernel"; |
| 402 |
|
| 403 |
interrupt-controller; |
| 404 |
#interrupt-cells = <2>; |
| 405 |
}; |
| 406 |
}; |
| 407 |
|
| 408 |
smsm { |
| 409 |
compatible = "qcom,smsm"; |
| 410 |
|
| 411 |
#address-cells = <1>; |
| 412 |
#size-cells = <0>; |
| 413 |
|
| 414 |
mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>; |
| 415 |
|
| 416 |
apps_smsm: apps@0 { |
| 417 |
reg = <0>; |
| 418 |
|
| 419 |
#qcom,smem-state-cells = <1>; |
| 420 |
}; |
| 421 |
|
| 422 |
hexagon_smsm: hexagon@1 { |
| 423 |
reg = <1>; |
| 424 |
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; |
| 425 |
|
| 426 |
interrupt-controller; |
| 427 |
#interrupt-cells = <2>; |
| 428 |
}; |
| 429 |
|
| 430 |
wcnss_smsm: wcnss@6 { |
| 431 |
reg = <6>; |
| 432 |
interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; |
| 433 |
|
| 434 |
interrupt-controller; |
| 435 |
#interrupt-cells = <2>; |
| 436 |
}; |
| 437 |
}; |
| 438 |
|
| 439 |
soc: soc@0 { |
| 440 |
#address-cells = <1>; |
| 441 |
#size-cells = <1>; |
| 442 |
ranges = <0 0 0 0xffffffff>; |
| 443 |
compatible = "simple-bus"; |
| 444 |
|
| 445 |
rng@22000 { |
| 446 |
compatible = "qcom,prng"; |
| 447 |
reg = <0x00022000 0x200>; |
| 448 |
clocks = <&gcc GCC_PRNG_AHB_CLK>; |
| 449 |
clock-names = "core"; |
| 450 |
}; |
| 451 |
|
| 452 |
restart@4ab000 { |
| 453 |
compatible = "qcom,pshold"; |
| 454 |
reg = <0x004ab000 0x4>; |
| 455 |
}; |
| 456 |
|
| 457 |
qfprom: qfprom@5c000 { |
| 458 |
compatible = "qcom,msm8916-qfprom", "qcom,qfprom"; |
| 459 |
reg = <0x0005c000 0x1000>; |
| 460 |
#address-cells = <1>; |
| 461 |
#size-cells = <1>; |
| 462 |
|
| 463 |
tsens_base1: base1@d0 { |
| 464 |
reg = <0xd0 0x1>; |
| 465 |
bits = <0 7>; |
| 466 |
}; |
| 467 |
|
| 468 |
tsens_s0_p1: s0-p1@d0 { |
| 469 |
reg = <0xd0 0x2>; |
| 470 |
bits = <7 5>; |
| 471 |
}; |
| 472 |
|
| 473 |
tsens_s0_p2: s0-p2@d1 { |
| 474 |
reg = <0xd1 0x2>; |
| 475 |
bits = <4 5>; |
| 476 |
}; |
| 477 |
|
| 478 |
tsens_s1_p1: s1-p1@d2 { |
| 479 |
reg = <0xd2 0x1>; |
| 480 |
bits = <1 5>; |
| 481 |
}; |
| 482 |
tsens_s1_p2: s1-p2@d2 { |
| 483 |
reg = <0xd2 0x2>; |
| 484 |
bits = <6 5>; |
| 485 |
}; |
| 486 |
tsens_s2_p1: s2-p1@d3 { |
| 487 |
reg = <0xd3 0x1>; |
| 488 |
bits = <3 5>; |
| 489 |
}; |
| 490 |
|
| 491 |
tsens_s2_p2: s2-p2@d4 { |
| 492 |
reg = <0xd4 0x1>; |
| 493 |
bits = <0 5>; |
| 494 |
}; |
| 495 |
|
| 496 |
// no tsens with hw_id 3 |
| 497 |
|
| 498 |
tsens_s4_p1: s4-p1@d4 { |
| 499 |
reg = <0xd4 0x2>; |
| 500 |
bits = <5 5>; |
| 501 |
}; |
| 502 |
|
| 503 |
tsens_s4_p2: s4-p2@d5 { |
| 504 |
reg = <0xd5 0x1>; |
| 505 |
bits = <2 5>; |
| 506 |
}; |
| 507 |
|
| 508 |
tsens_s5_p1: s5-p1@d5 { |
| 509 |
reg = <0xd5 0x2>; |
| 510 |
bits = <7 5>; |
| 511 |
}; |
| 512 |
|
| 513 |
tsens_s5_p2: s5-p2@d6 { |
| 514 |
reg = <0xd6 0x2>; |
| 515 |
bits = <4 5>; |
| 516 |
}; |
| 517 |
|
| 518 |
tsens_base2: base2@d7 { |
| 519 |
reg = <0xd7 0x1>; |
| 520 |
bits = <1 7>; |
| 521 |
}; |
| 522 |
|
| 523 |
tsens_mode: mode@ef { |
| 524 |
reg = <0xef 0x1>; |
| 525 |
bits = <5 3>; |
| 526 |
}; |
| 527 |
}; |
| 528 |
|
| 529 |
rpm_msg_ram: sram@60000 { |
| 530 |
compatible = "qcom,rpm-msg-ram"; |
| 531 |
reg = <0x00060000 0x8000>; |
| 532 |
}; |
| 533 |
|
| 534 |
sram@290000 { |
| 535 |
compatible = "qcom,msm8916-rpm-stats"; |
| 536 |
reg = <0x00290000 0x10000>; |
| 537 |
}; |
| 538 |
|
| 539 |
bimc: interconnect@400000 { |
| 540 |
compatible = "qcom,msm8916-bimc"; |
| 541 |
reg = <0x00400000 0x62000>; |
| 542 |
#interconnect-cells = <1>; |
| 543 |
}; |
| 544 |
|
| 545 |
tsens: thermal-sensor@4a9000 { |
| 546 |
compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; |
| 547 |
reg = <0x004a9000 0x1000>, /* TM */ |
| 548 |
<0x004a8000 0x1000>; /* SROT */ |
| 549 |
|
| 550 |
// no hw_id 3 |
| 551 |
nvmem-cells = <&tsens_mode>, |
| 552 |
<&tsens_base1>, <&tsens_base2>, |
| 553 |
<&tsens_s0_p1>, <&tsens_s0_p2>, |
| 554 |
<&tsens_s1_p1>, <&tsens_s1_p2>, |
| 555 |
<&tsens_s2_p1>, <&tsens_s2_p2>, |
| 556 |
<&tsens_s4_p1>, <&tsens_s4_p2>, |
| 557 |
<&tsens_s5_p1>, <&tsens_s5_p2>; |
| 558 |
nvmem-cell-names = "mode", |
| 559 |
"base1", "base2", |
| 560 |
"s0_p1", "s0_p2", |
| 561 |
"s1_p1", "s1_p2", |
| 562 |
"s2_p1", "s2_p2", |
| 563 |
"s4_p1", "s4_p2", |
| 564 |
"s5_p1", "s5_p2"; |
| 565 |
#qcom,sensors = <5>; |
| 566 |
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; |
| 567 |
interrupt-names = "uplow"; |
| 568 |
#thermal-sensor-cells = <1>; |
| 569 |
}; |
| 570 |
|
| 571 |
pcnoc: interconnect@500000 { |
| 572 |
compatible = "qcom,msm8916-pcnoc"; |
| 573 |
reg = <0x00500000 0x11000>; |
| 574 |
#interconnect-cells = <1>; |
| 575 |
}; |
| 576 |
|
| 577 |
snoc: interconnect@580000 { |
| 578 |
compatible = "qcom,msm8916-snoc"; |
| 579 |
reg = <0x00580000 0x14000>; |
| 580 |
#interconnect-cells = <1>; |
| 581 |
}; |
| 582 |
|
| 583 |
stm: stm@802000 { |
| 584 |
compatible = "arm,coresight-stm", "arm,primecell"; |
| 585 |
reg = <0x00802000 0x1000>, |
| 586 |
<0x09280000 0x180000>; |
| 587 |
reg-names = "stm-base", "stm-stimulus-base"; |
| 588 |
|
| 589 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 590 |
clock-names = "apb_pclk", "atclk"; |
| 591 |
|
| 592 |
status = "disabled"; |
| 593 |
|
| 594 |
out-ports { |
| 595 |
port { |
| 596 |
stm_out: endpoint { |
| 597 |
remote-endpoint = <&funnel0_in7>; |
| 598 |
}; |
| 599 |
}; |
| 600 |
}; |
| 601 |
}; |
| 602 |
|
| 603 |
/* System CTIs */ |
| 604 |
/* CTI 0 - TMC connections */ |
| 605 |
cti0: cti@810000 { |
| 606 |
compatible = "arm,coresight-cti", "arm,primecell"; |
| 607 |
reg = <0x00810000 0x1000>; |
| 608 |
|
| 609 |
clocks = <&rpmcc RPM_QDSS_CLK>; |
| 610 |
clock-names = "apb_pclk"; |
| 611 |
|
| 612 |
status = "disabled"; |
| 613 |
}; |
| 614 |
|
| 615 |
/* CTI 1 - TPIU connections */ |
| 616 |
cti1: cti@811000 { |
| 617 |
compatible = "arm,coresight-cti", "arm,primecell"; |
| 618 |
reg = <0x00811000 0x1000>; |
| 619 |
|
| 620 |
clocks = <&rpmcc RPM_QDSS_CLK>; |
| 621 |
clock-names = "apb_pclk"; |
| 622 |
|
| 623 |
status = "disabled"; |
| 624 |
}; |
| 625 |
|
| 626 |
/* CTIs 2-11 - no information - not instantiated */ |
| 627 |
|
| 628 |
tpiu: tpiu@820000 { |
| 629 |
compatible = "arm,coresight-tpiu", "arm,primecell"; |
| 630 |
reg = <0x00820000 0x1000>; |
| 631 |
|
| 632 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 633 |
clock-names = "apb_pclk", "atclk"; |
| 634 |
|
| 635 |
status = "disabled"; |
| 636 |
|
| 637 |
in-ports { |
| 638 |
port { |
| 639 |
tpiu_in: endpoint { |
| 640 |
remote-endpoint = <&replicator_out1>; |
| 641 |
}; |
| 642 |
}; |
| 643 |
}; |
| 644 |
}; |
| 645 |
|
| 646 |
funnel0: funnel@821000 { |
| 647 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 648 |
reg = <0x00821000 0x1000>; |
| 649 |
|
| 650 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 651 |
clock-names = "apb_pclk", "atclk"; |
| 652 |
|
| 653 |
status = "disabled"; |
| 654 |
|
| 655 |
in-ports { |
| 656 |
#address-cells = <1>; |
| 657 |
#size-cells = <0>; |
| 658 |
|
| 659 |
/* |
| 660 |
* Not described input ports: |
| 661 |
* 0 - connected to Resource and Power Manger CPU ETM |
| 662 |
* 1 - not-connected |
| 663 |
* 2 - connected to Modem CPU ETM |
| 664 |
* 3 - not-connected |
| 665 |
* 5 - not-connected |
| 666 |
* 6 - connected trought funnel to Wireless CPU ETM |
| 667 |
* 7 - connected to STM component |
| 668 |
*/ |
| 669 |
|
| 670 |
port@4 { |
| 671 |
reg = <4>; |
| 672 |
funnel0_in4: endpoint { |
| 673 |
remote-endpoint = <&funnel1_out>; |
| 674 |
}; |
| 675 |
}; |
| 676 |
|
| 677 |
port@7 { |
| 678 |
reg = <7>; |
| 679 |
funnel0_in7: endpoint { |
| 680 |
remote-endpoint = <&stm_out>; |
| 681 |
}; |
| 682 |
}; |
| 683 |
}; |
| 684 |
|
| 685 |
out-ports { |
| 686 |
port { |
| 687 |
funnel0_out: endpoint { |
| 688 |
remote-endpoint = <&etf_in>; |
| 689 |
}; |
| 690 |
}; |
| 691 |
}; |
| 692 |
}; |
| 693 |
|
| 694 |
replicator: replicator@824000 { |
| 695 |
compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; |
| 696 |
reg = <0x00824000 0x1000>; |
| 697 |
|
| 698 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 699 |
clock-names = "apb_pclk", "atclk"; |
| 700 |
|
| 701 |
status = "disabled"; |
| 702 |
|
| 703 |
out-ports { |
| 704 |
#address-cells = <1>; |
| 705 |
#size-cells = <0>; |
| 706 |
|
| 707 |
port@0 { |
| 708 |
reg = <0>; |
| 709 |
replicator_out0: endpoint { |
| 710 |
remote-endpoint = <&etr_in>; |
| 711 |
}; |
| 712 |
}; |
| 713 |
port@1 { |
| 714 |
reg = <1>; |
| 715 |
replicator_out1: endpoint { |
| 716 |
remote-endpoint = <&tpiu_in>; |
| 717 |
}; |
| 718 |
}; |
| 719 |
}; |
| 720 |
|
| 721 |
in-ports { |
| 722 |
port { |
| 723 |
replicator_in: endpoint { |
| 724 |
remote-endpoint = <&etf_out>; |
| 725 |
}; |
| 726 |
}; |
| 727 |
}; |
| 728 |
}; |
| 729 |
|
| 730 |
etf: etf@825000 { |
| 731 |
compatible = "arm,coresight-tmc", "arm,primecell"; |
| 732 |
reg = <0x00825000 0x1000>; |
| 733 |
|
| 734 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 735 |
clock-names = "apb_pclk", "atclk"; |
| 736 |
|
| 737 |
status = "disabled"; |
| 738 |
|
| 739 |
in-ports { |
| 740 |
port { |
| 741 |
etf_in: endpoint { |
| 742 |
remote-endpoint = <&funnel0_out>; |
| 743 |
}; |
| 744 |
}; |
| 745 |
}; |
| 746 |
|
| 747 |
out-ports { |
| 748 |
port { |
| 749 |
etf_out: endpoint { |
| 750 |
remote-endpoint = <&replicator_in>; |
| 751 |
}; |
| 752 |
}; |
| 753 |
}; |
| 754 |
}; |
| 755 |
|
| 756 |
etr: etr@826000 { |
| 757 |
compatible = "arm,coresight-tmc", "arm,primecell"; |
| 758 |
reg = <0x00826000 0x1000>; |
| 759 |
|
| 760 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 761 |
clock-names = "apb_pclk", "atclk"; |
| 762 |
|
| 763 |
status = "disabled"; |
| 764 |
|
| 765 |
in-ports { |
| 766 |
port { |
| 767 |
etr_in: endpoint { |
| 768 |
remote-endpoint = <&replicator_out0>; |
| 769 |
}; |
| 770 |
}; |
| 771 |
}; |
| 772 |
}; |
| 773 |
|
| 774 |
funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */ |
| 775 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 776 |
reg = <0x00841000 0x1000>; |
| 777 |
|
| 778 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 779 |
clock-names = "apb_pclk", "atclk"; |
| 780 |
|
| 781 |
status = "disabled"; |
| 782 |
|
| 783 |
in-ports { |
| 784 |
#address-cells = <1>; |
| 785 |
#size-cells = <0>; |
| 786 |
|
| 787 |
port@0 { |
| 788 |
reg = <0>; |
| 789 |
funnel1_in0: endpoint { |
| 790 |
remote-endpoint = <&etm0_out>; |
| 791 |
}; |
| 792 |
}; |
| 793 |
port@1 { |
| 794 |
reg = <1>; |
| 795 |
funnel1_in1: endpoint { |
| 796 |
remote-endpoint = <&etm1_out>; |
| 797 |
}; |
| 798 |
}; |
| 799 |
port@2 { |
| 800 |
reg = <2>; |
| 801 |
funnel1_in2: endpoint { |
| 802 |
remote-endpoint = <&etm2_out>; |
| 803 |
}; |
| 804 |
}; |
| 805 |
port@3 { |
| 806 |
reg = <3>; |
| 807 |
funnel1_in3: endpoint { |
| 808 |
remote-endpoint = <&etm3_out>; |
| 809 |
}; |
| 810 |
}; |
| 811 |
}; |
| 812 |
|
| 813 |
out-ports { |
| 814 |
port { |
| 815 |
funnel1_out: endpoint { |
| 816 |
remote-endpoint = <&funnel0_in4>; |
| 817 |
}; |
| 818 |
}; |
| 819 |
}; |
| 820 |
}; |
| 821 |
|
| 822 |
debug0: debug@850000 { |
| 823 |
compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| 824 |
reg = <0x00850000 0x1000>; |
| 825 |
clocks = <&rpmcc RPM_QDSS_CLK>; |
| 826 |
clock-names = "apb_pclk"; |
| 827 |
cpu = <&cpu0>; |
| 828 |
status = "disabled"; |
| 829 |
}; |
| 830 |
|
| 831 |
debug1: debug@852000 { |
| 832 |
compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| 833 |
reg = <0x00852000 0x1000>; |
| 834 |
clocks = <&rpmcc RPM_QDSS_CLK>; |
| 835 |
clock-names = "apb_pclk"; |
| 836 |
cpu = <&cpu1>; |
| 837 |
status = "disabled"; |
| 838 |
}; |
| 839 |
|
| 840 |
debug2: debug@854000 { |
| 841 |
compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| 842 |
reg = <0x00854000 0x1000>; |
| 843 |
clocks = <&rpmcc RPM_QDSS_CLK>; |
| 844 |
clock-names = "apb_pclk"; |
| 845 |
cpu = <&cpu2>; |
| 846 |
status = "disabled"; |
| 847 |
}; |
| 848 |
|
| 849 |
debug3: debug@856000 { |
| 850 |
compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| 851 |
reg = <0x00856000 0x1000>; |
| 852 |
clocks = <&rpmcc RPM_QDSS_CLK>; |
| 853 |
clock-names = "apb_pclk"; |
| 854 |
cpu = <&cpu3>; |
| 855 |
status = "disabled"; |
| 856 |
}; |
| 857 |
|
| 858 |
/* Core CTIs; CTIs 12-15 */ |
| 859 |
/* CTI - CPU-0 */ |
| 860 |
cti12: cti@858000 { |
| 861 |
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", |
| 862 |
"arm,primecell"; |
| 863 |
reg = <0x00858000 0x1000>; |
| 864 |
|
| 865 |
clocks = <&rpmcc RPM_QDSS_CLK>; |
| 866 |
clock-names = "apb_pclk"; |
| 867 |
|
| 868 |
cpu = <&cpu0>; |
| 869 |
arm,cs-dev-assoc = <&etm0>; |
| 870 |
|
| 871 |
status = "disabled"; |
| 872 |
}; |
| 873 |
|
| 874 |
/* CTI - CPU-1 */ |
| 875 |
cti13: cti@859000 { |
| 876 |
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", |
| 877 |
"arm,primecell"; |
| 878 |
reg = <0x00859000 0x1000>; |
| 879 |
|
| 880 |
clocks = <&rpmcc RPM_QDSS_CLK>; |
| 881 |
clock-names = "apb_pclk"; |
| 882 |
|
| 883 |
cpu = <&cpu1>; |
| 884 |
arm,cs-dev-assoc = <&etm1>; |
| 885 |
|
| 886 |
status = "disabled"; |
| 887 |
}; |
| 888 |
|
| 889 |
/* CTI - CPU-2 */ |
| 890 |
cti14: cti@85a000 { |
| 891 |
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", |
| 892 |
"arm,primecell"; |
| 893 |
reg = <0x0085a000 0x1000>; |
| 894 |
|
| 895 |
clocks = <&rpmcc RPM_QDSS_CLK>; |
| 896 |
clock-names = "apb_pclk"; |
| 897 |
|
| 898 |
cpu = <&cpu2>; |
| 899 |
arm,cs-dev-assoc = <&etm2>; |
| 900 |
|
| 901 |
status = "disabled"; |
| 902 |
}; |
| 903 |
|
| 904 |
/* CTI - CPU-3 */ |
| 905 |
cti15: cti@85b000 { |
| 906 |
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", |
| 907 |
"arm,primecell"; |
| 908 |
reg = <0x0085b000 0x1000>; |
| 909 |
|
| 910 |
clocks = <&rpmcc RPM_QDSS_CLK>; |
| 911 |
clock-names = "apb_pclk"; |
| 912 |
|
| 913 |
cpu = <&cpu3>; |
| 914 |
arm,cs-dev-assoc = <&etm3>; |
| 915 |
|
| 916 |
status = "disabled"; |
| 917 |
}; |
| 918 |
|
| 919 |
etm0: etm@85c000 { |
| 920 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 921 |
reg = <0x0085c000 0x1000>; |
| 922 |
|
| 923 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 924 |
clock-names = "apb_pclk", "atclk"; |
| 925 |
arm,coresight-loses-context-with-cpu; |
| 926 |
|
| 927 |
cpu = <&cpu0>; |
| 928 |
|
| 929 |
status = "disabled"; |
| 930 |
|
| 931 |
out-ports { |
| 932 |
port { |
| 933 |
etm0_out: endpoint { |
| 934 |
remote-endpoint = <&funnel1_in0>; |
| 935 |
}; |
| 936 |
}; |
| 937 |
}; |
| 938 |
}; |
| 939 |
|
| 940 |
etm1: etm@85d000 { |
| 941 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 942 |
reg = <0x0085d000 0x1000>; |
| 943 |
|
| 944 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 945 |
clock-names = "apb_pclk", "atclk"; |
| 946 |
arm,coresight-loses-context-with-cpu; |
| 947 |
|
| 948 |
cpu = <&cpu1>; |
| 949 |
|
| 950 |
status = "disabled"; |
| 951 |
|
| 952 |
out-ports { |
| 953 |
port { |
| 954 |
etm1_out: endpoint { |
| 955 |
remote-endpoint = <&funnel1_in1>; |
| 956 |
}; |
| 957 |
}; |
| 958 |
}; |
| 959 |
}; |
| 960 |
|
| 961 |
etm2: etm@85e000 { |
| 962 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 963 |
reg = <0x0085e000 0x1000>; |
| 964 |
|
| 965 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 966 |
clock-names = "apb_pclk", "atclk"; |
| 967 |
arm,coresight-loses-context-with-cpu; |
| 968 |
|
| 969 |
cpu = <&cpu2>; |
| 970 |
|
| 971 |
status = "disabled"; |
| 972 |
|
| 973 |
out-ports { |
| 974 |
port { |
| 975 |
etm2_out: endpoint { |
| 976 |
remote-endpoint = <&funnel1_in2>; |
| 977 |
}; |
| 978 |
}; |
| 979 |
}; |
| 980 |
}; |
| 981 |
|
| 982 |
etm3: etm@85f000 { |
| 983 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 984 |
reg = <0x0085f000 0x1000>; |
| 985 |
|
| 986 |
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| 987 |
clock-names = "apb_pclk", "atclk"; |
| 988 |
arm,coresight-loses-context-with-cpu; |
| 989 |
|
| 990 |
cpu = <&cpu3>; |
| 991 |
|
| 992 |
status = "disabled"; |
| 993 |
|
| 994 |
out-ports { |
| 995 |
port { |
| 996 |
etm3_out: endpoint { |
| 997 |
remote-endpoint = <&funnel1_in3>; |
| 998 |
}; |
| 999 |
}; |
| 1000 |
}; |
| 1001 |
}; |
| 1002 |
|
| 1003 |
tlmm: pinctrl@1000000 { |
| 1004 |
compatible = "qcom,msm8916-pinctrl"; |
| 1005 |
reg = <0x01000000 0x300000>; |
| 1006 |
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| 1007 |
gpio-controller; |
| 1008 |
gpio-ranges = <&tlmm 0 0 122>; |
| 1009 |
#gpio-cells = <2>; |
| 1010 |
interrupt-controller; |
| 1011 |
#interrupt-cells = <2>; |
| 1012 |
|
| 1013 |
blsp_i2c1_default: blsp-i2c1-default-state { |
| 1014 |
pins = "gpio2", "gpio3"; |
| 1015 |
function = "blsp_i2c1"; |
| 1016 |
drive-strength = <2>; |
| 1017 |
bias-disable; |
| 1018 |
}; |
| 1019 |
|
| 1020 |
blsp_i2c1_sleep: blsp-i2c1-sleep-state { |
| 1021 |
pins = "gpio2", "gpio3"; |
| 1022 |
function = "gpio"; |
| 1023 |
drive-strength = <2>; |
| 1024 |
bias-disable; |
| 1025 |
}; |
| 1026 |
|
| 1027 |
blsp_i2c2_default: blsp-i2c2-default-state { |
| 1028 |
pins = "gpio6", "gpio7"; |
| 1029 |
function = "blsp_i2c2"; |
| 1030 |
drive-strength = <2>; |
| 1031 |
bias-disable; |
| 1032 |
}; |
| 1033 |
|
| 1034 |
blsp_i2c2_sleep: blsp-i2c2-sleep-state { |
| 1035 |
pins = "gpio6", "gpio7"; |
| 1036 |
function = "gpio"; |
| 1037 |
drive-strength = <2>; |
| 1038 |
bias-disable; |
| 1039 |
}; |
| 1040 |
|
| 1041 |
blsp_i2c3_default: blsp-i2c3-default-state { |
| 1042 |
pins = "gpio10", "gpio11"; |
| 1043 |
function = "blsp_i2c3"; |
| 1044 |
drive-strength = <2>; |
| 1045 |
bias-disable; |
| 1046 |
}; |
| 1047 |
|
| 1048 |
blsp_i2c3_sleep: blsp-i2c3-sleep-state { |
| 1049 |
pins = "gpio10", "gpio11"; |
| 1050 |
function = "gpio"; |
| 1051 |
drive-strength = <2>; |
| 1052 |
bias-disable; |
| 1053 |
}; |
| 1054 |
|
| 1055 |
blsp_i2c4_default: blsp-i2c4-default-state { |
| 1056 |
pins = "gpio14", "gpio15"; |
| 1057 |
function = "blsp_i2c4"; |
| 1058 |
drive-strength = <2>; |
| 1059 |
bias-disable; |
| 1060 |
}; |
| 1061 |
|
| 1062 |
blsp_i2c4_sleep: blsp-i2c4-sleep-state { |
| 1063 |
pins = "gpio14", "gpio15"; |
| 1064 |
function = "gpio"; |
| 1065 |
drive-strength = <2>; |
| 1066 |
bias-disable; |
| 1067 |
}; |
| 1068 |
|
| 1069 |
blsp_i2c5_default: blsp-i2c5-default-state { |
| 1070 |
pins = "gpio18", "gpio19"; |
| 1071 |
function = "blsp_i2c5"; |
| 1072 |
drive-strength = <2>; |
| 1073 |
bias-disable; |
| 1074 |
}; |
| 1075 |
|
| 1076 |
blsp_i2c5_sleep: blsp-i2c5-sleep-state { |
| 1077 |
pins = "gpio18", "gpio19"; |
| 1078 |
function = "gpio"; |
| 1079 |
drive-strength = <2>; |
| 1080 |
bias-disable; |
| 1081 |
}; |
| 1082 |
|
| 1083 |
blsp_i2c6_default: blsp-i2c6-default-state { |
| 1084 |
pins = "gpio22", "gpio23"; |
| 1085 |
function = "blsp_i2c6"; |
| 1086 |
drive-strength = <2>; |
| 1087 |
bias-disable; |
| 1088 |
}; |
| 1089 |
|
| 1090 |
blsp_i2c6_sleep: blsp-i2c6-sleep-state { |
| 1091 |
pins = "gpio22", "gpio23"; |
| 1092 |
function = "gpio"; |
| 1093 |
drive-strength = <2>; |
| 1094 |
bias-disable; |
| 1095 |
}; |
| 1096 |
|
| 1097 |
blsp_spi1_default: blsp-spi1-default-state { |
| 1098 |
spi-pins { |
| 1099 |
pins = "gpio0", "gpio1", "gpio3"; |
| 1100 |
function = "blsp_spi1"; |
| 1101 |
drive-strength = <12>; |
| 1102 |
bias-disable; |
| 1103 |
}; |
| 1104 |
cs-pins { |
| 1105 |
pins = "gpio2"; |
| 1106 |
function = "gpio"; |
| 1107 |
drive-strength = <16>; |
| 1108 |
bias-disable; |
| 1109 |
output-high; |
| 1110 |
}; |
| 1111 |
}; |
| 1112 |
|
| 1113 |
blsp_spi1_sleep: blsp-spi1-sleep-state { |
| 1114 |
pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| 1115 |
function = "gpio"; |
| 1116 |
drive-strength = <2>; |
| 1117 |
bias-pull-down; |
| 1118 |
}; |
| 1119 |
|
| 1120 |
blsp_spi2_default: blsp-spi2-default-state { |
| 1121 |
spi-pins { |
| 1122 |
pins = "gpio4", "gpio5", "gpio7"; |
| 1123 |
function = "blsp_spi2"; |
| 1124 |
drive-strength = <12>; |
| 1125 |
bias-disable; |
| 1126 |
}; |
| 1127 |
cs-pins { |
| 1128 |
pins = "gpio6"; |
| 1129 |
function = "gpio"; |
| 1130 |
drive-strength = <16>; |
| 1131 |
bias-disable; |
| 1132 |
output-high; |
| 1133 |
}; |
| 1134 |
}; |
| 1135 |
|
| 1136 |
blsp_spi2_sleep: blsp-spi2-sleep-state { |
| 1137 |
pins = "gpio4", "gpio5", "gpio6", "gpio7"; |
| 1138 |
function = "gpio"; |
| 1139 |
drive-strength = <2>; |
| 1140 |
bias-pull-down; |
| 1141 |
}; |
| 1142 |
|
| 1143 |
blsp_spi3_default: blsp-spi3-default-state { |
| 1144 |
spi-pins { |
| 1145 |
pins = "gpio8", "gpio9", "gpio11"; |
| 1146 |
function = "blsp_spi3"; |
| 1147 |
drive-strength = <12>; |
| 1148 |
bias-disable; |
| 1149 |
}; |
| 1150 |
cs-pins { |
| 1151 |
pins = "gpio10"; |
| 1152 |
function = "gpio"; |
| 1153 |
drive-strength = <16>; |
| 1154 |
bias-disable; |
| 1155 |
output-high; |
| 1156 |
}; |
| 1157 |
}; |
| 1158 |
|
| 1159 |
blsp_spi3_sleep: blsp-spi3-sleep-state { |
| 1160 |
pins = "gpio8", "gpio9", "gpio10", "gpio11"; |
| 1161 |
function = "gpio"; |
| 1162 |
drive-strength = <2>; |
| 1163 |
bias-pull-down; |
| 1164 |
}; |
| 1165 |
|
| 1166 |
blsp_spi4_default: blsp-spi4-default-state { |
| 1167 |
spi-pins { |
| 1168 |
pins = "gpio12", "gpio13", "gpio15"; |
| 1169 |
function = "blsp_spi4"; |
| 1170 |
drive-strength = <12>; |
| 1171 |
bias-disable; |
| 1172 |
}; |
| 1173 |
cs-pins { |
| 1174 |
pins = "gpio14"; |
| 1175 |
function = "gpio"; |
| 1176 |
drive-strength = <16>; |
| 1177 |
bias-disable; |
| 1178 |
output-high; |
| 1179 |
}; |
| 1180 |
}; |
| 1181 |
|
| 1182 |
blsp_spi4_sleep: blsp-spi4-sleep-state { |
| 1183 |
pins = "gpio12", "gpio13", "gpio14", "gpio15"; |
| 1184 |
function = "gpio"; |
| 1185 |
drive-strength = <2>; |
| 1186 |
bias-pull-down; |
| 1187 |
}; |
| 1188 |
|
| 1189 |
blsp_spi5_default: blsp-spi5-default-state { |
| 1190 |
spi-pins { |
| 1191 |
pins = "gpio16", "gpio17", "gpio19"; |
| 1192 |
function = "blsp_spi5"; |
| 1193 |
drive-strength = <12>; |
| 1194 |
bias-disable; |
| 1195 |
}; |
| 1196 |
cs-pins { |
| 1197 |
pins = "gpio18"; |
| 1198 |
function = "gpio"; |
| 1199 |
drive-strength = <16>; |
| 1200 |
bias-disable; |
| 1201 |
output-high; |
| 1202 |
}; |
| 1203 |
}; |
| 1204 |
|
| 1205 |
blsp_spi5_sleep: blsp-spi5-sleep-state { |
| 1206 |
pins = "gpio16", "gpio17", "gpio18", "gpio19"; |
| 1207 |
function = "gpio"; |
| 1208 |
drive-strength = <2>; |
| 1209 |
bias-pull-down; |
| 1210 |
}; |
| 1211 |
|
| 1212 |
blsp_spi6_default: blsp-spi6-default-state { |
| 1213 |
spi-pins { |
| 1214 |
pins = "gpio20", "gpio21", "gpio23"; |
| 1215 |
function = "blsp_spi6"; |
| 1216 |
drive-strength = <12>; |
| 1217 |
bias-disable; |
| 1218 |
}; |
| 1219 |
cs-pins { |
| 1220 |
pins = "gpio22"; |
| 1221 |
function = "gpio"; |
| 1222 |
drive-strength = <16>; |
| 1223 |
bias-disable; |
| 1224 |
output-high; |
| 1225 |
}; |
| 1226 |
}; |
| 1227 |
|
| 1228 |
blsp_spi6_sleep: blsp-spi6-sleep-state { |
| 1229 |
pins = "gpio20", "gpio21", "gpio22", "gpio23"; |
| 1230 |
function = "gpio"; |
| 1231 |
drive-strength = <2>; |
| 1232 |
bias-pull-down; |
| 1233 |
}; |
| 1234 |
|
| 1235 |
blsp_uart1_console_default: blsp-uart1-console-default-state { |
| 1236 |
tx-pins { |
| 1237 |
pins = "gpio0"; |
| 1238 |
function = "blsp_uart1"; |
| 1239 |
drive-strength = <16>; |
| 1240 |
bias-disable; |
| 1241 |
bootph-all; |
| 1242 |
}; |
| 1243 |
|
| 1244 |
rx-pins { |
| 1245 |
pins = "gpio1"; |
| 1246 |
function = "blsp_uart1"; |
| 1247 |
drive-strength = <16>; |
| 1248 |
bias-pull-up; |
| 1249 |
bootph-all; |
| 1250 |
}; |
| 1251 |
}; |
| 1252 |
|
| 1253 |
blsp_uart1_console_sleep: blsp-uart1-console-sleep-state { |
| 1254 |
pins = "gpio0", "gpio1"; |
| 1255 |
function = "gpio"; |
| 1256 |
drive-strength = <2>; |
| 1257 |
bias-pull-down; |
| 1258 |
}; |
| 1259 |
|
| 1260 |
blsp_uart2_console_default: blsp-uart2-console-default-state { |
| 1261 |
tx-pins { |
| 1262 |
pins = "gpio4"; |
| 1263 |
function = "blsp_uart2"; |
| 1264 |
drive-strength = <16>; |
| 1265 |
bias-disable; |
| 1266 |
bootph-all; |
| 1267 |
}; |
| 1268 |
|
| 1269 |
rx-pins { |
| 1270 |
pins = "gpio5"; |
| 1271 |
function = "blsp_uart2"; |
| 1272 |
drive-strength = <16>; |
| 1273 |
bias-pull-up; |
| 1274 |
bootph-all; |
| 1275 |
}; |
| 1276 |
}; |
| 1277 |
|
| 1278 |
blsp_uart2_console_sleep: blsp-uart2-console-sleep-state { |
| 1279 |
pins = "gpio4", "gpio5"; |
| 1280 |
function = "gpio"; |
| 1281 |
drive-strength = <2>; |
| 1282 |
bias-pull-down; |
| 1283 |
}; |
| 1284 |
|
| 1285 |
camera_front_default: camera-front-default-state { |
| 1286 |
pwdn-pins { |
| 1287 |
pins = "gpio33"; |
| 1288 |
function = "gpio"; |
| 1289 |
drive-strength = <16>; |
| 1290 |
bias-disable; |
| 1291 |
}; |
| 1292 |
rst-pins { |
| 1293 |
pins = "gpio28"; |
| 1294 |
function = "gpio"; |
| 1295 |
drive-strength = <16>; |
| 1296 |
bias-disable; |
| 1297 |
}; |
| 1298 |
mclk1-pins { |
| 1299 |
pins = "gpio27"; |
| 1300 |
function = "cam_mclk1"; |
| 1301 |
drive-strength = <16>; |
| 1302 |
bias-disable; |
| 1303 |
}; |
| 1304 |
}; |
| 1305 |
|
| 1306 |
camera_rear_default: camera-rear-default-state { |
| 1307 |
pwdn-pins { |
| 1308 |
pins = "gpio34"; |
| 1309 |
function = "gpio"; |
| 1310 |
drive-strength = <16>; |
| 1311 |
bias-disable; |
| 1312 |
}; |
| 1313 |
rst-pins { |
| 1314 |
pins = "gpio35"; |
| 1315 |
function = "gpio"; |
| 1316 |
drive-strength = <16>; |
| 1317 |
bias-disable; |
| 1318 |
}; |
| 1319 |
mclk0-pins { |
| 1320 |
pins = "gpio26"; |
| 1321 |
function = "cam_mclk0"; |
| 1322 |
drive-strength = <16>; |
| 1323 |
bias-disable; |
| 1324 |
}; |
| 1325 |
}; |
| 1326 |
|
| 1327 |
cci0_default: cci0-default-state { |
| 1328 |
pins = "gpio29", "gpio30"; |
| 1329 |
function = "cci_i2c"; |
| 1330 |
drive-strength = <16>; |
| 1331 |
bias-disable; |
| 1332 |
}; |
| 1333 |
|
| 1334 |
cdc_dmic_default: cdc-dmic-default-state { |
| 1335 |
clk-pins { |
| 1336 |
pins = "gpio0"; |
| 1337 |
function = "dmic0_clk"; |
| 1338 |
drive-strength = <8>; |
| 1339 |
}; |
| 1340 |
data-pins { |
| 1341 |
pins = "gpio1"; |
| 1342 |
function = "dmic0_data"; |
| 1343 |
drive-strength = <8>; |
| 1344 |
}; |
| 1345 |
}; |
| 1346 |
|
| 1347 |
cdc_dmic_sleep: cdc-dmic-sleep-state { |
| 1348 |
clk-pins { |
| 1349 |
pins = "gpio0"; |
| 1350 |
function = "dmic0_clk"; |
| 1351 |
drive-strength = <2>; |
| 1352 |
bias-disable; |
| 1353 |
}; |
| 1354 |
data-pins { |
| 1355 |
pins = "gpio1"; |
| 1356 |
function = "dmic0_data"; |
| 1357 |
drive-strength = <2>; |
| 1358 |
bias-disable; |
| 1359 |
}; |
| 1360 |
}; |
| 1361 |
|
| 1362 |
cdc_pdm_default: cdc-pdm-default-state { |
| 1363 |
pins = "gpio63", "gpio64", "gpio65", "gpio66", |
| 1364 |
"gpio67", "gpio68"; |
| 1365 |
function = "cdc_pdm0"; |
| 1366 |
drive-strength = <8>; |
| 1367 |
bias-disable; |
| 1368 |
}; |
| 1369 |
|
| 1370 |
cdc_pdm_sleep: cdc-pdm-sleep-state { |
| 1371 |
pins = "gpio63", "gpio64", "gpio65", "gpio66", |
| 1372 |
"gpio67", "gpio68"; |
| 1373 |
function = "cdc_pdm0"; |
| 1374 |
drive-strength = <2>; |
| 1375 |
bias-pull-down; |
| 1376 |
}; |
| 1377 |
|
| 1378 |
pri_mi2s_default: mi2s-pri-default-state { |
| 1379 |
pins = "gpio113", "gpio114", "gpio115", "gpio116"; |
| 1380 |
function = "pri_mi2s"; |
| 1381 |
drive-strength = <8>; |
| 1382 |
bias-disable; |
| 1383 |
}; |
| 1384 |
|
| 1385 |
pri_mi2s_sleep: mi2s-pri-sleep-state { |
| 1386 |
pins = "gpio113", "gpio114", "gpio115", "gpio116"; |
| 1387 |
function = "pri_mi2s"; |
| 1388 |
drive-strength = <2>; |
| 1389 |
bias-disable; |
| 1390 |
}; |
| 1391 |
|
| 1392 |
pri_mi2s_mclk_default: mi2s-pri-mclk-default-state { |
| 1393 |
pins = "gpio116"; |
| 1394 |
function = "pri_mi2s"; |
| 1395 |
drive-strength = <8>; |
| 1396 |
bias-disable; |
| 1397 |
}; |
| 1398 |
|
| 1399 |
pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state { |
| 1400 |
pins = "gpio116"; |
| 1401 |
function = "pri_mi2s"; |
| 1402 |
drive-strength = <2>; |
| 1403 |
bias-disable; |
| 1404 |
}; |
| 1405 |
|
| 1406 |
pri_mi2s_ws_default: mi2s-pri-ws-default-state { |
| 1407 |
pins = "gpio110"; |
| 1408 |
function = "pri_mi2s_ws"; |
| 1409 |
drive-strength = <8>; |
| 1410 |
bias-disable; |
| 1411 |
}; |
| 1412 |
|
| 1413 |
pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state { |
| 1414 |
pins = "gpio110"; |
| 1415 |
function = "pri_mi2s_ws"; |
| 1416 |
drive-strength = <2>; |
| 1417 |
bias-disable; |
| 1418 |
}; |
| 1419 |
|
| 1420 |
sec_mi2s_default: mi2s-sec-default-state { |
| 1421 |
pins = "gpio112", "gpio117", "gpio118", "gpio119"; |
| 1422 |
function = "sec_mi2s"; |
| 1423 |
drive-strength = <8>; |
| 1424 |
bias-disable; |
| 1425 |
}; |
| 1426 |
|
| 1427 |
sec_mi2s_sleep: mi2s-sec-sleep-state { |
| 1428 |
pins = "gpio112", "gpio117", "gpio118", "gpio119"; |
| 1429 |
function = "sec_mi2s"; |
| 1430 |
drive-strength = <2>; |
| 1431 |
bias-disable; |
| 1432 |
}; |
| 1433 |
|
| 1434 |
sdc1_default: sdc1-default-state { |
| 1435 |
clk-pins { |
| 1436 |
pins = "sdc1_clk"; |
| 1437 |
bias-disable; |
| 1438 |
drive-strength = <16>; |
| 1439 |
}; |
| 1440 |
cmd-pins { |
| 1441 |
pins = "sdc1_cmd"; |
| 1442 |
bias-pull-up; |
| 1443 |
drive-strength = <10>; |
| 1444 |
}; |
| 1445 |
data-pins { |
| 1446 |
pins = "sdc1_data"; |
| 1447 |
bias-pull-up; |
| 1448 |
drive-strength = <10>; |
| 1449 |
}; |
| 1450 |
}; |
| 1451 |
|
| 1452 |
sdc1_sleep: sdc1-sleep-state { |
| 1453 |
clk-pins { |
| 1454 |
pins = "sdc1_clk"; |
| 1455 |
bias-disable; |
| 1456 |
drive-strength = <2>; |
| 1457 |
}; |
| 1458 |
cmd-pins { |
| 1459 |
pins = "sdc1_cmd"; |
| 1460 |
bias-pull-up; |
| 1461 |
drive-strength = <2>; |
| 1462 |
}; |
| 1463 |
data-pins { |
| 1464 |
pins = "sdc1_data"; |
| 1465 |
bias-pull-up; |
| 1466 |
drive-strength = <2>; |
| 1467 |
}; |
| 1468 |
}; |
| 1469 |
|
| 1470 |
sdc2_default: sdc2-default-state { |
| 1471 |
clk-pins { |
| 1472 |
pins = "sdc2_clk"; |
| 1473 |
bias-disable; |
| 1474 |
drive-strength = <16>; |
| 1475 |
}; |
| 1476 |
cmd-pins { |
| 1477 |
pins = "sdc2_cmd"; |
| 1478 |
bias-pull-up; |
| 1479 |
drive-strength = <10>; |
| 1480 |
}; |
| 1481 |
data-pins { |
| 1482 |
pins = "sdc2_data"; |
| 1483 |
bias-pull-up; |
| 1484 |
drive-strength = <10>; |
| 1485 |
}; |
| 1486 |
}; |
| 1487 |
|
| 1488 |
sdc2_sleep: sdc2-sleep-state { |
| 1489 |
clk-pins { |
| 1490 |
pins = "sdc2_clk"; |
| 1491 |
bias-disable; |
| 1492 |
drive-strength = <2>; |
| 1493 |
}; |
| 1494 |
cmd-pins { |
| 1495 |
pins = "sdc2_cmd"; |
| 1496 |
bias-pull-up; |
| 1497 |
drive-strength = <2>; |
| 1498 |
}; |
| 1499 |
data-pins { |
| 1500 |
pins = "sdc2_data"; |
| 1501 |
bias-pull-up; |
| 1502 |
drive-strength = <2>; |
| 1503 |
}; |
| 1504 |
}; |
| 1505 |
|
| 1506 |
wcss_wlan_default: wcss-wlan-default-state { |
| 1507 |
pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; |
| 1508 |
function = "wcss_wlan"; |
| 1509 |
drive-strength = <6>; |
| 1510 |
bias-pull-up; |
| 1511 |
}; |
| 1512 |
}; |
| 1513 |
|
| 1514 |
gcc: clock-controller@1800000 { |
| 1515 |
compatible = "qcom,gcc-msm8916"; |
| 1516 |
#clock-cells = <1>; |
| 1517 |
#reset-cells = <1>; |
| 1518 |
#power-domain-cells = <1>; |
| 1519 |
reg = <0x01800000 0x80000>; |
| 1520 |
clocks = <&xo_board>, |
| 1521 |
<&sleep_clk>, |
| 1522 |
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, |
| 1523 |
<&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, |
| 1524 |
<0>, |
| 1525 |
<0>, |
| 1526 |
<0>; |
| 1527 |
clock-names = "xo", |
| 1528 |
"sleep_clk", |
| 1529 |
"dsi0pll", |
| 1530 |
"dsi0pllbyte", |
| 1531 |
"ext_mclk", |
| 1532 |
"ext_pri_i2s", |
| 1533 |
"ext_sec_i2s"; |
| 1534 |
}; |
| 1535 |
|
| 1536 |
tcsr_mutex: hwlock@1905000 { |
| 1537 |
compatible = "qcom,tcsr-mutex"; |
| 1538 |
reg = <0x01905000 0x20000>; |
| 1539 |
#hwlock-cells = <1>; |
| 1540 |
}; |
| 1541 |
|
| 1542 |
tcsr: syscon@1937000 { |
| 1543 |
compatible = "qcom,tcsr-msm8916", "syscon"; |
| 1544 |
reg = <0x01937000 0x30000>; |
| 1545 |
}; |
| 1546 |
|
| 1547 |
mdss: display-subsystem@1a00000 { |
| 1548 |
status = "disabled"; |
| 1549 |
compatible = "qcom,mdss"; |
| 1550 |
reg = <0x01a00000 0x1000>, |
| 1551 |
<0x01ac8000 0x3000>; |
| 1552 |
reg-names = "mdss_phys", "vbif_phys"; |
| 1553 |
|
| 1554 |
power-domains = <&gcc MDSS_GDSC>; |
| 1555 |
|
| 1556 |
clocks = <&gcc GCC_MDSS_AHB_CLK>, |
| 1557 |
<&gcc GCC_MDSS_AXI_CLK>, |
| 1558 |
<&gcc GCC_MDSS_VSYNC_CLK>; |
| 1559 |
clock-names = "iface", |
| 1560 |
"bus", |
| 1561 |
"vsync"; |
| 1562 |
|
| 1563 |
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| 1564 |
|
| 1565 |
resets = <&gcc GCC_MDSS_BCR>; |
| 1566 |
|
| 1567 |
interrupt-controller; |
| 1568 |
#interrupt-cells = <1>; |
| 1569 |
|
| 1570 |
#address-cells = <1>; |
| 1571 |
#size-cells = <1>; |
| 1572 |
ranges; |
| 1573 |
|
| 1574 |
mdss_mdp: display-controller@1a01000 { |
| 1575 |
compatible = "qcom,msm8916-mdp5", "qcom,mdp5"; |
| 1576 |
reg = <0x01a01000 0x89000>; |
| 1577 |
reg-names = "mdp_phys"; |
| 1578 |
|
| 1579 |
interrupt-parent = <&mdss>; |
| 1580 |
interrupts = <0>; |
| 1581 |
|
| 1582 |
clocks = <&gcc GCC_MDSS_AHB_CLK>, |
| 1583 |
<&gcc GCC_MDSS_AXI_CLK>, |
| 1584 |
<&gcc GCC_MDSS_MDP_CLK>, |
| 1585 |
<&gcc GCC_MDSS_VSYNC_CLK>; |
| 1586 |
clock-names = "iface", |
| 1587 |
"bus", |
| 1588 |
"core", |
| 1589 |
"vsync"; |
| 1590 |
|
| 1591 |
iommus = <&apps_iommu 4>; |
| 1592 |
|
| 1593 |
ports { |
| 1594 |
#address-cells = <1>; |
| 1595 |
#size-cells = <0>; |
| 1596 |
|
| 1597 |
port@0 { |
| 1598 |
reg = <0>; |
| 1599 |
mdss_mdp_intf1_out: endpoint { |
| 1600 |
remote-endpoint = <&mdss_dsi0_in>; |
| 1601 |
}; |
| 1602 |
}; |
| 1603 |
}; |
| 1604 |
}; |
| 1605 |
|
| 1606 |
mdss_dsi0: dsi@1a98000 { |
| 1607 |
compatible = "qcom,msm8916-dsi-ctrl", |
| 1608 |
"qcom,mdss-dsi-ctrl"; |
| 1609 |
reg = <0x01a98000 0x25c>; |
| 1610 |
reg-names = "dsi_ctrl"; |
| 1611 |
|
| 1612 |
interrupt-parent = <&mdss>; |
| 1613 |
interrupts = <4>; |
| 1614 |
|
| 1615 |
assigned-clocks = <&gcc BYTE0_CLK_SRC>, |
| 1616 |
<&gcc PCLK0_CLK_SRC>; |
| 1617 |
assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, |
| 1618 |
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; |
| 1619 |
|
| 1620 |
clocks = <&gcc GCC_MDSS_MDP_CLK>, |
| 1621 |
<&gcc GCC_MDSS_AHB_CLK>, |
| 1622 |
<&gcc GCC_MDSS_AXI_CLK>, |
| 1623 |
<&gcc GCC_MDSS_BYTE0_CLK>, |
| 1624 |
<&gcc GCC_MDSS_PCLK0_CLK>, |
| 1625 |
<&gcc GCC_MDSS_ESC0_CLK>; |
| 1626 |
clock-names = "mdp_core", |
| 1627 |
"iface", |
| 1628 |
"bus", |
| 1629 |
"byte", |
| 1630 |
"pixel", |
| 1631 |
"core"; |
| 1632 |
phys = <&mdss_dsi0_phy>; |
| 1633 |
|
| 1634 |
#address-cells = <1>; |
| 1635 |
#size-cells = <0>; |
| 1636 |
|
| 1637 |
ports { |
| 1638 |
#address-cells = <1>; |
| 1639 |
#size-cells = <0>; |
| 1640 |
|
| 1641 |
port@0 { |
| 1642 |
reg = <0>; |
| 1643 |
mdss_dsi0_in: endpoint { |
| 1644 |
remote-endpoint = <&mdss_mdp_intf1_out>; |
| 1645 |
}; |
| 1646 |
}; |
| 1647 |
|
| 1648 |
port@1 { |
| 1649 |
reg = <1>; |
| 1650 |
mdss_dsi0_out: endpoint { |
| 1651 |
}; |
| 1652 |
}; |
| 1653 |
}; |
| 1654 |
}; |
| 1655 |
|
| 1656 |
mdss_dsi0_phy: phy@1a98300 { |
| 1657 |
compatible = "qcom,dsi-phy-28nm-lp"; |
| 1658 |
reg = <0x01a98300 0xd4>, |
| 1659 |
<0x01a98500 0x280>, |
| 1660 |
<0x01a98780 0x30>; |
| 1661 |
reg-names = "dsi_pll", |
| 1662 |
"dsi_phy", |
| 1663 |
"dsi_phy_regulator"; |
| 1664 |
|
| 1665 |
#clock-cells = <1>; |
| 1666 |
#phy-cells = <0>; |
| 1667 |
|
| 1668 |
clocks = <&gcc GCC_MDSS_AHB_CLK>, |
| 1669 |
<&xo_board>; |
| 1670 |
clock-names = "iface", "ref"; |
| 1671 |
}; |
| 1672 |
}; |
| 1673 |
|
| 1674 |
camss: camss@1b0ac00 { |
| 1675 |
compatible = "qcom,msm8916-camss"; |
| 1676 |
reg = <0x01b0ac00 0x200>, |
| 1677 |
<0x01b00030 0x4>, |
| 1678 |
<0x01b0b000 0x200>, |
| 1679 |
<0x01b00038 0x4>, |
| 1680 |
<0x01b08000 0x100>, |
| 1681 |
<0x01b08400 0x100>, |
| 1682 |
<0x01b0a000 0x500>, |
| 1683 |
<0x01b00020 0x10>, |
| 1684 |
<0x01b10000 0x1000>; |
| 1685 |
reg-names = "csiphy0", |
| 1686 |
"csiphy0_clk_mux", |
| 1687 |
"csiphy1", |
| 1688 |
"csiphy1_clk_mux", |
| 1689 |
"csid0", |
| 1690 |
"csid1", |
| 1691 |
"ispif", |
| 1692 |
"csi_clk_mux", |
| 1693 |
"vfe0"; |
| 1694 |
interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, |
| 1695 |
<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, |
| 1696 |
<GIC_SPI 51 IRQ_TYPE_EDGE_RISING>, |
| 1697 |
<GIC_SPI 52 IRQ_TYPE_EDGE_RISING>, |
| 1698 |
<GIC_SPI 55 IRQ_TYPE_EDGE_RISING>, |
| 1699 |
<GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; |
| 1700 |
interrupt-names = "csiphy0", |
| 1701 |
"csiphy1", |
| 1702 |
"csid0", |
| 1703 |
"csid1", |
| 1704 |
"ispif", |
| 1705 |
"vfe0"; |
| 1706 |
power-domains = <&gcc VFE_GDSC>; |
| 1707 |
clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, |
| 1708 |
<&gcc GCC_CAMSS_ISPIF_AHB_CLK>, |
| 1709 |
<&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, |
| 1710 |
<&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, |
| 1711 |
<&gcc GCC_CAMSS_CSI0_AHB_CLK>, |
| 1712 |
<&gcc GCC_CAMSS_CSI0_CLK>, |
| 1713 |
<&gcc GCC_CAMSS_CSI0PHY_CLK>, |
| 1714 |
<&gcc GCC_CAMSS_CSI0PIX_CLK>, |
| 1715 |
<&gcc GCC_CAMSS_CSI0RDI_CLK>, |
| 1716 |
<&gcc GCC_CAMSS_CSI1_AHB_CLK>, |
| 1717 |
<&gcc GCC_CAMSS_CSI1_CLK>, |
| 1718 |
<&gcc GCC_CAMSS_CSI1PHY_CLK>, |
| 1719 |
<&gcc GCC_CAMSS_CSI1PIX_CLK>, |
| 1720 |
<&gcc GCC_CAMSS_CSI1RDI_CLK>, |
| 1721 |
<&gcc GCC_CAMSS_AHB_CLK>, |
| 1722 |
<&gcc GCC_CAMSS_VFE0_CLK>, |
| 1723 |
<&gcc GCC_CAMSS_CSI_VFE0_CLK>, |
| 1724 |
<&gcc GCC_CAMSS_VFE_AHB_CLK>, |
| 1725 |
<&gcc GCC_CAMSS_VFE_AXI_CLK>; |
| 1726 |
clock-names = "top_ahb", |
| 1727 |
"ispif_ahb", |
| 1728 |
"csiphy0_timer", |
| 1729 |
"csiphy1_timer", |
| 1730 |
"csi0_ahb", |
| 1731 |
"csi0", |
| 1732 |
"csi0_phy", |
| 1733 |
"csi0_pix", |
| 1734 |
"csi0_rdi", |
| 1735 |
"csi1_ahb", |
| 1736 |
"csi1", |
| 1737 |
"csi1_phy", |
| 1738 |
"csi1_pix", |
| 1739 |
"csi1_rdi", |
| 1740 |
"ahb", |
| 1741 |
"vfe0", |
| 1742 |
"csi_vfe0", |
| 1743 |
"vfe_ahb", |
| 1744 |
"vfe_axi"; |
| 1745 |
iommus = <&apps_iommu 3>; |
| 1746 |
status = "disabled"; |
| 1747 |
ports { |
| 1748 |
#address-cells = <1>; |
| 1749 |
#size-cells = <0>; |
| 1750 |
|
| 1751 |
port@0 { |
| 1752 |
reg = <0>; |
| 1753 |
}; |
| 1754 |
|
| 1755 |
port@1 { |
| 1756 |
reg = <1>; |
| 1757 |
}; |
| 1758 |
}; |
| 1759 |
}; |
| 1760 |
|
| 1761 |
cci: cci@1b0c000 { |
| 1762 |
compatible = "qcom,msm8916-cci", "qcom,msm8226-cci"; |
| 1763 |
#address-cells = <1>; |
| 1764 |
#size-cells = <0>; |
| 1765 |
reg = <0x01b0c000 0x1000>; |
| 1766 |
interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; |
| 1767 |
clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, |
| 1768 |
<&gcc GCC_CAMSS_CCI_AHB_CLK>, |
| 1769 |
<&gcc GCC_CAMSS_CCI_CLK>, |
| 1770 |
<&gcc GCC_CAMSS_AHB_CLK>; |
| 1771 |
clock-names = "camss_top_ahb", "cci_ahb", |
| 1772 |
"cci", "camss_ahb"; |
| 1773 |
assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>, |
| 1774 |
<&gcc GCC_CAMSS_CCI_CLK>; |
| 1775 |
assigned-clock-rates = <80000000>, <19200000>; |
| 1776 |
pinctrl-names = "default"; |
| 1777 |
pinctrl-0 = <&cci0_default>; |
| 1778 |
status = "disabled"; |
| 1779 |
|
| 1780 |
cci_i2c0: i2c-bus@0 { |
| 1781 |
reg = <0>; |
| 1782 |
clock-frequency = <400000>; |
| 1783 |
#address-cells = <1>; |
| 1784 |
#size-cells = <0>; |
| 1785 |
}; |
| 1786 |
}; |
| 1787 |
|
| 1788 |
gpu: gpu@1c00000 { |
| 1789 |
compatible = "qcom,adreno-306.0", "qcom,adreno"; |
| 1790 |
reg = <0x01c00000 0x20000>; |
| 1791 |
reg-names = "kgsl_3d0_reg_memory"; |
| 1792 |
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 1793 |
interrupt-names = "kgsl_3d0_irq"; |
| 1794 |
clock-names = |
| 1795 |
"core", |
| 1796 |
"iface", |
| 1797 |
"mem", |
| 1798 |
"mem_iface", |
| 1799 |
"alt_mem_iface", |
| 1800 |
"gfx3d"; |
| 1801 |
clocks = |
| 1802 |
<&gcc GCC_OXILI_GFX3D_CLK>, |
| 1803 |
<&gcc GCC_OXILI_AHB_CLK>, |
| 1804 |
<&gcc GCC_OXILI_GMEM_CLK>, |
| 1805 |
<&gcc GCC_BIMC_GFX_CLK>, |
| 1806 |
<&gcc GCC_BIMC_GPU_CLK>, |
| 1807 |
<&gcc GFX3D_CLK_SRC>; |
| 1808 |
power-domains = <&gcc OXILI_GDSC>; |
| 1809 |
operating-points-v2 = <&gpu_opp_table>; |
| 1810 |
iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; |
| 1811 |
#cooling-cells = <2>; |
| 1812 |
|
| 1813 |
status = "disabled"; |
| 1814 |
|
| 1815 |
gpu_opp_table: opp-table { |
| 1816 |
compatible = "operating-points-v2"; |
| 1817 |
|
| 1818 |
opp-400000000 { |
| 1819 |
opp-hz = /bits/ 64 <400000000>; |
| 1820 |
}; |
| 1821 |
opp-19200000 { |
| 1822 |
opp-hz = /bits/ 64 <19200000>; |
| 1823 |
}; |
| 1824 |
}; |
| 1825 |
}; |
| 1826 |
|
| 1827 |
venus: video-codec@1d00000 { |
| 1828 |
compatible = "qcom,msm8916-venus"; |
| 1829 |
reg = <0x01d00000 0xff000>; |
| 1830 |
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| 1831 |
power-domains = <&gcc VENUS_GDSC>; |
| 1832 |
clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, |
| 1833 |
<&gcc GCC_VENUS0_AHB_CLK>, |
| 1834 |
<&gcc GCC_VENUS0_AXI_CLK>; |
| 1835 |
clock-names = "core", "iface", "bus"; |
| 1836 |
iommus = <&apps_iommu 5>; |
| 1837 |
memory-region = <&venus_mem>; |
| 1838 |
status = "disabled"; |
| 1839 |
}; |
| 1840 |
|
| 1841 |
apps_iommu: iommu@1ef0000 { |
| 1842 |
#address-cells = <1>; |
| 1843 |
#size-cells = <1>; |
| 1844 |
#iommu-cells = <1>; |
| 1845 |
compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; |
| 1846 |
ranges = <0 0x01e20000 0x20000>; |
| 1847 |
reg = <0x01ef0000 0x3000>; |
| 1848 |
clocks = <&gcc GCC_SMMU_CFG_CLK>, |
| 1849 |
<&gcc GCC_APSS_TCU_CLK>; |
| 1850 |
clock-names = "iface", "bus"; |
| 1851 |
qcom,iommu-secure-id = <17>; |
| 1852 |
|
| 1853 |
/* VFE */ |
| 1854 |
iommu-ctx@3000 { |
| 1855 |
compatible = "qcom,msm-iommu-v1-sec"; |
| 1856 |
reg = <0x3000 0x1000>; |
| 1857 |
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
| 1858 |
}; |
| 1859 |
|
| 1860 |
/* MDP_0 */ |
| 1861 |
iommu-ctx@4000 { |
| 1862 |
compatible = "qcom,msm-iommu-v1-ns"; |
| 1863 |
reg = <0x4000 0x1000>; |
| 1864 |
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
| 1865 |
}; |
| 1866 |
|
| 1867 |
/* VENUS_NS */ |
| 1868 |
iommu-ctx@5000 { |
| 1869 |
compatible = "qcom,msm-iommu-v1-sec"; |
| 1870 |
reg = <0x5000 0x1000>; |
| 1871 |
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
| 1872 |
}; |
| 1873 |
}; |
| 1874 |
|
| 1875 |
gpu_iommu: iommu@1f08000 { |
| 1876 |
#address-cells = <1>; |
| 1877 |
#size-cells = <1>; |
| 1878 |
#iommu-cells = <1>; |
| 1879 |
compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; |
| 1880 |
ranges = <0 0x01f08000 0x10000>; |
| 1881 |
clocks = <&gcc GCC_SMMU_CFG_CLK>, |
| 1882 |
<&gcc GCC_GFX_TCU_CLK>; |
| 1883 |
clock-names = "iface", "bus"; |
| 1884 |
qcom,iommu-secure-id = <18>; |
| 1885 |
|
| 1886 |
/* GFX3D_USER */ |
| 1887 |
iommu-ctx@1000 { |
| 1888 |
compatible = "qcom,msm-iommu-v1-ns"; |
| 1889 |
reg = <0x1000 0x1000>; |
| 1890 |
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; |
| 1891 |
}; |
| 1892 |
|
| 1893 |
/* GFX3D_PRIV */ |
| 1894 |
iommu-ctx@2000 { |
| 1895 |
compatible = "qcom,msm-iommu-v1-ns"; |
| 1896 |
reg = <0x2000 0x1000>; |
| 1897 |
interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; |
| 1898 |
}; |
| 1899 |
}; |
| 1900 |
|
| 1901 |
spmi_bus: spmi@200f000 { |
| 1902 |
compatible = "qcom,spmi-pmic-arb"; |
| 1903 |
reg = <0x0200f000 0x001000>, |
| 1904 |
<0x02400000 0x400000>, |
| 1905 |
<0x02c00000 0x400000>, |
| 1906 |
<0x03800000 0x200000>, |
| 1907 |
<0x0200a000 0x002100>; |
| 1908 |
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| 1909 |
interrupt-names = "periph_irq"; |
| 1910 |
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; |
| 1911 |
qcom,ee = <0>; |
| 1912 |
qcom,channel = <0>; |
| 1913 |
#address-cells = <2>; |
| 1914 |
#size-cells = <0>; |
| 1915 |
interrupt-controller; |
| 1916 |
#interrupt-cells = <4>; |
| 1917 |
}; |
| 1918 |
|
| 1919 |
bam_dmux_dma: dma-controller@4044000 { |
| 1920 |
compatible = "qcom,bam-v1.7.0"; |
| 1921 |
reg = <0x04044000 0x19000>; |
| 1922 |
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 1923 |
#dma-cells = <1>; |
| 1924 |
qcom,ee = <0>; |
| 1925 |
|
| 1926 |
num-channels = <6>; |
| 1927 |
qcom,num-ees = <1>; |
| 1928 |
qcom,powered-remotely; |
| 1929 |
|
| 1930 |
status = "disabled"; |
| 1931 |
}; |
| 1932 |
|
| 1933 |
mpss: remoteproc@4080000 { |
| 1934 |
compatible = "qcom,msm8916-mss-pil"; |
| 1935 |
reg = <0x04080000 0x100>, |
| 1936 |
<0x04020000 0x040>; |
| 1937 |
|
| 1938 |
reg-names = "qdsp6", "rmb"; |
| 1939 |
|
| 1940 |
interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, |
| 1941 |
<&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| 1942 |
<&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| 1943 |
<&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| 1944 |
<&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| 1945 |
interrupt-names = "wdog", "fatal", "ready", |
| 1946 |
"handover", "stop-ack"; |
| 1947 |
|
| 1948 |
power-domains = <&rpmpd RPMPD_VDDCX>, |
| 1949 |
<&rpmpd RPMPD_VDDMX>; |
| 1950 |
power-domain-names = "cx", "mx"; |
| 1951 |
|
| 1952 |
clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, |
| 1953 |
<&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, |
| 1954 |
<&gcc GCC_BOOT_ROM_AHB_CLK>, |
| 1955 |
<&xo_board>; |
| 1956 |
clock-names = "iface", "bus", "mem", "xo"; |
| 1957 |
|
| 1958 |
qcom,smem-states = <&hexagon_smp2p_out 0>; |
| 1959 |
qcom,smem-state-names = "stop"; |
| 1960 |
|
| 1961 |
resets = <&scm 0>; |
| 1962 |
reset-names = "mss_restart"; |
| 1963 |
|
| 1964 |
qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; |
| 1965 |
|
| 1966 |
status = "disabled"; |
| 1967 |
|
| 1968 |
mba { |
| 1969 |
memory-region = <&mba_mem>; |
| 1970 |
}; |
| 1971 |
|
| 1972 |
mpss { |
| 1973 |
memory-region = <&mpss_mem>; |
| 1974 |
}; |
| 1975 |
|
| 1976 |
bam_dmux: bam-dmux { |
| 1977 |
compatible = "qcom,bam-dmux"; |
| 1978 |
|
| 1979 |
interrupt-parent = <&hexagon_smsm>; |
| 1980 |
interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; |
| 1981 |
interrupt-names = "pc", "pc-ack"; |
| 1982 |
|
| 1983 |
qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; |
| 1984 |
qcom,smem-state-names = "pc", "pc-ack"; |
| 1985 |
|
| 1986 |
dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; |
| 1987 |
dma-names = "tx", "rx"; |
| 1988 |
|
| 1989 |
status = "disabled"; |
| 1990 |
}; |
| 1991 |
|
| 1992 |
smd-edge { |
| 1993 |
interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; |
| 1994 |
|
| 1995 |
qcom,smd-edge = <0>; |
| 1996 |
mboxes = <&apcs 12>; |
| 1997 |
qcom,remote-pid = <1>; |
| 1998 |
|
| 1999 |
label = "hexagon"; |
| 2000 |
|
| 2001 |
apr: apr { |
| 2002 |
compatible = "qcom,apr-v2"; |
| 2003 |
qcom,smd-channels = "apr_audio_svc"; |
| 2004 |
qcom,domain = <APR_DOMAIN_ADSP>; |
| 2005 |
#address-cells = <1>; |
| 2006 |
#size-cells = <0>; |
| 2007 |
status = "disabled"; |
| 2008 |
|
| 2009 |
q6core: service@3 { |
| 2010 |
compatible = "qcom,q6core"; |
| 2011 |
reg = <APR_SVC_ADSP_CORE>; |
| 2012 |
}; |
| 2013 |
|
| 2014 |
q6afe: service@4 { |
| 2015 |
compatible = "qcom,q6afe"; |
| 2016 |
reg = <APR_SVC_AFE>; |
| 2017 |
|
| 2018 |
q6afedai: dais { |
| 2019 |
compatible = "qcom,q6afe-dais"; |
| 2020 |
#address-cells = <1>; |
| 2021 |
#size-cells = <0>; |
| 2022 |
#sound-dai-cells = <1>; |
| 2023 |
}; |
| 2024 |
}; |
| 2025 |
|
| 2026 |
q6asm: service@7 { |
| 2027 |
compatible = "qcom,q6asm"; |
| 2028 |
reg = <APR_SVC_ASM>; |
| 2029 |
|
| 2030 |
q6asmdai: dais { |
| 2031 |
compatible = "qcom,q6asm-dais"; |
| 2032 |
#address-cells = <1>; |
| 2033 |
#size-cells = <0>; |
| 2034 |
#sound-dai-cells = <1>; |
| 2035 |
}; |
| 2036 |
}; |
| 2037 |
|
| 2038 |
q6adm: service@8 { |
| 2039 |
compatible = "qcom,q6adm"; |
| 2040 |
reg = <APR_SVC_ADM>; |
| 2041 |
|
| 2042 |
q6routing: routing { |
| 2043 |
compatible = "qcom,q6adm-routing"; |
| 2044 |
#sound-dai-cells = <0>; |
| 2045 |
}; |
| 2046 |
}; |
| 2047 |
}; |
| 2048 |
|
| 2049 |
fastrpc { |
| 2050 |
compatible = "qcom,fastrpc"; |
| 2051 |
qcom,smd-channels = "fastrpcsmd-apps-dsp"; |
| 2052 |
label = "adsp"; |
| 2053 |
qcom,non-secure-domain; |
| 2054 |
|
| 2055 |
#address-cells = <1>; |
| 2056 |
#size-cells = <0>; |
| 2057 |
|
| 2058 |
cb@1 { |
| 2059 |
compatible = "qcom,fastrpc-compute-cb"; |
| 2060 |
reg = <1>; |
| 2061 |
}; |
| 2062 |
}; |
| 2063 |
}; |
| 2064 |
}; |
| 2065 |
|
| 2066 |
sound: sound@7702000 { |
| 2067 |
status = "disabled"; |
| 2068 |
compatible = "qcom,apq8016-sbc-sndcard"; |
| 2069 |
reg = <0x07702000 0x4>, <0x07702004 0x4>; |
| 2070 |
reg-names = "mic-iomux", "spkr-iomux"; |
| 2071 |
}; |
| 2072 |
|
| 2073 |
lpass: audio-controller@7708000 { |
| 2074 |
status = "disabled"; |
| 2075 |
compatible = "qcom,apq8016-lpass-cpu"; |
| 2076 |
|
| 2077 |
/* |
| 2078 |
* Note: Unlike the name would suggest, the SEC_I2S_CLK |
| 2079 |
* is actually only used by Tertiary MI2S while |
| 2080 |
* Primary/Secondary MI2S both use the PRI_I2S_CLK. |
| 2081 |
*/ |
| 2082 |
clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, |
| 2083 |
<&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, |
| 2084 |
<&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, |
| 2085 |
<&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, |
| 2086 |
<&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>, |
| 2087 |
<&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, |
| 2088 |
<&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>; |
| 2089 |
|
| 2090 |
clock-names = "ahbix-clk", |
| 2091 |
"mi2s-bit-clk0", |
| 2092 |
"mi2s-bit-clk1", |
| 2093 |
"mi2s-bit-clk2", |
| 2094 |
"mi2s-bit-clk3", |
| 2095 |
"pcnoc-mport-clk", |
| 2096 |
"pcnoc-sway-clk"; |
| 2097 |
#sound-dai-cells = <1>; |
| 2098 |
|
| 2099 |
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; |
| 2100 |
interrupt-names = "lpass-irq-lpaif"; |
| 2101 |
reg = <0x07708000 0x10000>; |
| 2102 |
reg-names = "lpass-lpaif"; |
| 2103 |
|
| 2104 |
#address-cells = <1>; |
| 2105 |
#size-cells = <0>; |
| 2106 |
}; |
| 2107 |
|
| 2108 |
lpass_codec: audio-codec@771c000 { |
| 2109 |
compatible = "qcom,msm8916-wcd-digital-codec"; |
| 2110 |
reg = <0x0771c000 0x400>; |
| 2111 |
clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, |
| 2112 |
<&gcc GCC_CODEC_DIGCODEC_CLK>; |
| 2113 |
clock-names = "ahbix-clk", "mclk"; |
| 2114 |
#sound-dai-cells = <1>; |
| 2115 |
status = "disabled"; |
| 2116 |
}; |
| 2117 |
|
| 2118 |
sdhc_1: mmc@7824900 { |
| 2119 |
compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; |
| 2120 |
reg = <0x07824900 0x11c>, <0x07824000 0x800>; |
| 2121 |
reg-names = "hc", "core"; |
| 2122 |
|
| 2123 |
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| 2124 |
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| 2125 |
interrupt-names = "hc_irq", "pwr_irq"; |
| 2126 |
clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| 2127 |
<&gcc GCC_SDCC1_APPS_CLK>, |
| 2128 |
<&xo_board>; |
| 2129 |
clock-names = "iface", "core", "xo"; |
| 2130 |
resets = <&gcc GCC_SDCC1_BCR>; |
| 2131 |
pinctrl-0 = <&sdc1_default>; |
| 2132 |
pinctrl-1 = <&sdc1_sleep>; |
| 2133 |
pinctrl-names = "default", "sleep"; |
| 2134 |
mmc-ddr-1_8v; |
| 2135 |
bus-width = <8>; |
| 2136 |
non-removable; |
| 2137 |
status = "disabled"; |
| 2138 |
}; |
| 2139 |
|
| 2140 |
sdhc_2: mmc@7864900 { |
| 2141 |
compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; |
| 2142 |
reg = <0x07864900 0x11c>, <0x07864000 0x800>; |
| 2143 |
reg-names = "hc", "core"; |
| 2144 |
|
| 2145 |
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| 2146 |
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; |
| 2147 |
interrupt-names = "hc_irq", "pwr_irq"; |
| 2148 |
clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| 2149 |
<&gcc GCC_SDCC2_APPS_CLK>, |
| 2150 |
<&xo_board>; |
| 2151 |
clock-names = "iface", "core", "xo"; |
| 2152 |
resets = <&gcc GCC_SDCC2_BCR>; |
| 2153 |
pinctrl-0 = <&sdc2_default>; |
| 2154 |
pinctrl-1 = <&sdc2_sleep>; |
| 2155 |
pinctrl-names = "default", "sleep"; |
| 2156 |
bus-width = <4>; |
| 2157 |
status = "disabled"; |
| 2158 |
}; |
| 2159 |
|
| 2160 |
blsp_dma: dma-controller@7884000 { |
| 2161 |
compatible = "qcom,bam-v1.7.0"; |
| 2162 |
reg = <0x07884000 0x23000>; |
| 2163 |
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; |
| 2164 |
clocks = <&gcc GCC_BLSP1_AHB_CLK>; |
| 2165 |
clock-names = "bam_clk"; |
| 2166 |
#dma-cells = <1>; |
| 2167 |
qcom,ee = <0>; |
| 2168 |
qcom,controlled-remotely; |
| 2169 |
}; |
| 2170 |
|
| 2171 |
blsp_uart1: serial@78af000 { |
| 2172 |
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| 2173 |
reg = <0x078af000 0x200>; |
| 2174 |
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| 2175 |
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| 2176 |
clock-names = "core", "iface"; |
| 2177 |
dmas = <&blsp_dma 0>, <&blsp_dma 1>; |
| 2178 |
dma-names = "tx", "rx"; |
| 2179 |
status = "disabled"; |
| 2180 |
}; |
| 2181 |
|
| 2182 |
blsp_uart2: serial@78b0000 { |
| 2183 |
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| 2184 |
reg = <0x078b0000 0x200>; |
| 2185 |
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| 2186 |
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| 2187 |
clock-names = "core", "iface"; |
| 2188 |
dmas = <&blsp_dma 2>, <&blsp_dma 3>; |
| 2189 |
dma-names = "tx", "rx"; |
| 2190 |
status = "disabled"; |
| 2191 |
}; |
| 2192 |
|
| 2193 |
blsp_i2c1: i2c@78b5000 { |
| 2194 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 2195 |
reg = <0x078b5000 0x500>; |
| 2196 |
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| 2197 |
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, |
| 2198 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 2199 |
clock-names = "core", "iface"; |
| 2200 |
dmas = <&blsp_dma 4>, <&blsp_dma 5>; |
| 2201 |
dma-names = "tx", "rx"; |
| 2202 |
pinctrl-names = "default", "sleep"; |
| 2203 |
pinctrl-0 = <&blsp_i2c1_default>; |
| 2204 |
pinctrl-1 = <&blsp_i2c1_sleep>; |
| 2205 |
#address-cells = <1>; |
| 2206 |
#size-cells = <0>; |
| 2207 |
status = "disabled"; |
| 2208 |
}; |
| 2209 |
|
| 2210 |
blsp_spi1: spi@78b5000 { |
| 2211 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 2212 |
reg = <0x078b5000 0x500>; |
| 2213 |
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| 2214 |
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, |
| 2215 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 2216 |
clock-names = "core", "iface"; |
| 2217 |
dmas = <&blsp_dma 4>, <&blsp_dma 5>; |
| 2218 |
dma-names = "tx", "rx"; |
| 2219 |
pinctrl-names = "default", "sleep"; |
| 2220 |
pinctrl-0 = <&blsp_spi1_default>; |
| 2221 |
pinctrl-1 = <&blsp_spi1_sleep>; |
| 2222 |
#address-cells = <1>; |
| 2223 |
#size-cells = <0>; |
| 2224 |
status = "disabled"; |
| 2225 |
}; |
| 2226 |
|
| 2227 |
blsp_i2c2: i2c@78b6000 { |
| 2228 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 2229 |
reg = <0x078b6000 0x500>; |
| 2230 |
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 2231 |
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, |
| 2232 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 2233 |
clock-names = "core", "iface"; |
| 2234 |
dmas = <&blsp_dma 6>, <&blsp_dma 7>; |
| 2235 |
dma-names = "tx", "rx"; |
| 2236 |
pinctrl-names = "default", "sleep"; |
| 2237 |
pinctrl-0 = <&blsp_i2c2_default>; |
| 2238 |
pinctrl-1 = <&blsp_i2c2_sleep>; |
| 2239 |
#address-cells = <1>; |
| 2240 |
#size-cells = <0>; |
| 2241 |
status = "disabled"; |
| 2242 |
}; |
| 2243 |
|
| 2244 |
blsp_spi2: spi@78b6000 { |
| 2245 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 2246 |
reg = <0x078b6000 0x500>; |
| 2247 |
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 2248 |
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, |
| 2249 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 2250 |
clock-names = "core", "iface"; |
| 2251 |
dmas = <&blsp_dma 6>, <&blsp_dma 7>; |
| 2252 |
dma-names = "tx", "rx"; |
| 2253 |
pinctrl-names = "default", "sleep"; |
| 2254 |
pinctrl-0 = <&blsp_spi2_default>; |
| 2255 |
pinctrl-1 = <&blsp_spi2_sleep>; |
| 2256 |
#address-cells = <1>; |
| 2257 |
#size-cells = <0>; |
| 2258 |
status = "disabled"; |
| 2259 |
}; |
| 2260 |
|
| 2261 |
blsp_i2c3: i2c@78b7000 { |
| 2262 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 2263 |
reg = <0x078b7000 0x500>; |
| 2264 |
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| 2265 |
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, |
| 2266 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 2267 |
clock-names = "core", "iface"; |
| 2268 |
dmas = <&blsp_dma 8>, <&blsp_dma 9>; |
| 2269 |
dma-names = "tx", "rx"; |
| 2270 |
pinctrl-names = "default", "sleep"; |
| 2271 |
pinctrl-0 = <&blsp_i2c3_default>; |
| 2272 |
pinctrl-1 = <&blsp_i2c3_sleep>; |
| 2273 |
#address-cells = <1>; |
| 2274 |
#size-cells = <0>; |
| 2275 |
status = "disabled"; |
| 2276 |
}; |
| 2277 |
|
| 2278 |
blsp_spi3: spi@78b7000 { |
| 2279 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 2280 |
reg = <0x078b7000 0x500>; |
| 2281 |
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| 2282 |
clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, |
| 2283 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 2284 |
clock-names = "core", "iface"; |
| 2285 |
dmas = <&blsp_dma 8>, <&blsp_dma 9>; |
| 2286 |
dma-names = "tx", "rx"; |
| 2287 |
pinctrl-names = "default", "sleep"; |
| 2288 |
pinctrl-0 = <&blsp_spi3_default>; |
| 2289 |
pinctrl-1 = <&blsp_spi3_sleep>; |
| 2290 |
#address-cells = <1>; |
| 2291 |
#size-cells = <0>; |
| 2292 |
status = "disabled"; |
| 2293 |
}; |
| 2294 |
|
| 2295 |
blsp_i2c4: i2c@78b8000 { |
| 2296 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 2297 |
reg = <0x078b8000 0x500>; |
| 2298 |
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| 2299 |
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, |
| 2300 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 2301 |
clock-names = "core", "iface"; |
| 2302 |
dmas = <&blsp_dma 10>, <&blsp_dma 11>; |
| 2303 |
dma-names = "tx", "rx"; |
| 2304 |
pinctrl-names = "default", "sleep"; |
| 2305 |
pinctrl-0 = <&blsp_i2c4_default>; |
| 2306 |
pinctrl-1 = <&blsp_i2c4_sleep>; |
| 2307 |
#address-cells = <1>; |
| 2308 |
#size-cells = <0>; |
| 2309 |
status = "disabled"; |
| 2310 |
}; |
| 2311 |
|
| 2312 |
blsp_spi4: spi@78b8000 { |
| 2313 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 2314 |
reg = <0x078b8000 0x500>; |
| 2315 |
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| 2316 |
clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, |
| 2317 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 2318 |
clock-names = "core", "iface"; |
| 2319 |
dmas = <&blsp_dma 10>, <&blsp_dma 11>; |
| 2320 |
dma-names = "tx", "rx"; |
| 2321 |
pinctrl-names = "default", "sleep"; |
| 2322 |
pinctrl-0 = <&blsp_spi4_default>; |
| 2323 |
pinctrl-1 = <&blsp_spi4_sleep>; |
| 2324 |
#address-cells = <1>; |
| 2325 |
#size-cells = <0>; |
| 2326 |
status = "disabled"; |
| 2327 |
}; |
| 2328 |
|
| 2329 |
blsp_i2c5: i2c@78b9000 { |
| 2330 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 2331 |
reg = <0x078b9000 0x500>; |
| 2332 |
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| 2333 |
clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, |
| 2334 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 2335 |
clock-names = "core", "iface"; |
| 2336 |
dmas = <&blsp_dma 12>, <&blsp_dma 13>; |
| 2337 |
dma-names = "tx", "rx"; |
| 2338 |
pinctrl-names = "default", "sleep"; |
| 2339 |
pinctrl-0 = <&blsp_i2c5_default>; |
| 2340 |
pinctrl-1 = <&blsp_i2c5_sleep>; |
| 2341 |
#address-cells = <1>; |
| 2342 |
#size-cells = <0>; |
| 2343 |
status = "disabled"; |
| 2344 |
}; |
| 2345 |
|
| 2346 |
blsp_spi5: spi@78b9000 { |
| 2347 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 2348 |
reg = <0x078b9000 0x500>; |
| 2349 |
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| 2350 |
clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, |
| 2351 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 2352 |
clock-names = "core", "iface"; |
| 2353 |
dmas = <&blsp_dma 12>, <&blsp_dma 13>; |
| 2354 |
dma-names = "tx", "rx"; |
| 2355 |
pinctrl-names = "default", "sleep"; |
| 2356 |
pinctrl-0 = <&blsp_spi5_default>; |
| 2357 |
pinctrl-1 = <&blsp_spi5_sleep>; |
| 2358 |
#address-cells = <1>; |
| 2359 |
#size-cells = <0>; |
| 2360 |
status = "disabled"; |
| 2361 |
}; |
| 2362 |
|
| 2363 |
blsp_i2c6: i2c@78ba000 { |
| 2364 |
compatible = "qcom,i2c-qup-v2.2.1"; |
| 2365 |
reg = <0x078ba000 0x500>; |
| 2366 |
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| 2367 |
clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, |
| 2368 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 2369 |
clock-names = "core", "iface"; |
| 2370 |
dmas = <&blsp_dma 14>, <&blsp_dma 15>; |
| 2371 |
dma-names = "tx", "rx"; |
| 2372 |
pinctrl-names = "default", "sleep"; |
| 2373 |
pinctrl-0 = <&blsp_i2c6_default>; |
| 2374 |
pinctrl-1 = <&blsp_i2c6_sleep>; |
| 2375 |
#address-cells = <1>; |
| 2376 |
#size-cells = <0>; |
| 2377 |
status = "disabled"; |
| 2378 |
}; |
| 2379 |
|
| 2380 |
blsp_spi6: spi@78ba000 { |
| 2381 |
compatible = "qcom,spi-qup-v2.2.1"; |
| 2382 |
reg = <0x078ba000 0x500>; |
| 2383 |
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| 2384 |
clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, |
| 2385 |
<&gcc GCC_BLSP1_AHB_CLK>; |
| 2386 |
clock-names = "core", "iface"; |
| 2387 |
dmas = <&blsp_dma 14>, <&blsp_dma 15>; |
| 2388 |
dma-names = "tx", "rx"; |
| 2389 |
pinctrl-names = "default", "sleep"; |
| 2390 |
pinctrl-0 = <&blsp_spi6_default>; |
| 2391 |
pinctrl-1 = <&blsp_spi6_sleep>; |
| 2392 |
#address-cells = <1>; |
| 2393 |
#size-cells = <0>; |
| 2394 |
status = "disabled"; |
| 2395 |
}; |
| 2396 |
|
| 2397 |
usb: usb@78d9000 { |
| 2398 |
compatible = "qcom,ci-hdrc"; |
| 2399 |
reg = <0x078d9000 0x200>, |
| 2400 |
<0x078d9200 0x200>; |
| 2401 |
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| 2402 |
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; |
| 2403 |
clocks = <&gcc GCC_USB_HS_AHB_CLK>, |
| 2404 |
<&gcc GCC_USB_HS_SYSTEM_CLK>; |
| 2405 |
clock-names = "iface", "core"; |
| 2406 |
assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; |
| 2407 |
assigned-clock-rates = <80000000>; |
| 2408 |
resets = <&gcc GCC_USB_HS_BCR>; |
| 2409 |
reset-names = "core"; |
| 2410 |
phy_type = "ulpi"; |
| 2411 |
dr_mode = "otg"; |
| 2412 |
hnp-disable; |
| 2413 |
srp-disable; |
| 2414 |
adp-disable; |
| 2415 |
ahb-burst-config = <0>; |
| 2416 |
phy-names = "usb-phy"; |
| 2417 |
phys = <&usb_hs_phy>; |
| 2418 |
status = "disabled"; |
| 2419 |
#reset-cells = <1>; |
| 2420 |
|
| 2421 |
ulpi { |
| 2422 |
usb_hs_phy: phy { |
| 2423 |
compatible = "qcom,usb-hs-phy-msm8916", |
| 2424 |
"qcom,usb-hs-phy"; |
| 2425 |
#phy-cells = <0>; |
| 2426 |
clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; |
| 2427 |
clock-names = "ref", "sleep"; |
| 2428 |
resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; |
| 2429 |
reset-names = "phy", "por"; |
| 2430 |
qcom,init-seq = /bits/ 8 <0x0 0x44>, |
| 2431 |
<0x1 0x6b>, |
| 2432 |
<0x2 0x24>, |
| 2433 |
<0x3 0x13>; |
| 2434 |
}; |
| 2435 |
}; |
| 2436 |
}; |
| 2437 |
|
| 2438 |
wcnss: remoteproc@a204000 { |
| 2439 |
compatible = "qcom,pronto-v2-pil", "qcom,pronto"; |
| 2440 |
reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; |
| 2441 |
reg-names = "ccu", "dxe", "pmu"; |
| 2442 |
|
| 2443 |
memory-region = <&wcnss_mem>; |
| 2444 |
|
| 2445 |
interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, |
| 2446 |
<&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| 2447 |
<&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| 2448 |
<&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| 2449 |
<&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| 2450 |
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; |
| 2451 |
|
| 2452 |
power-domains = <&rpmpd RPMPD_VDDCX>, |
| 2453 |
<&rpmpd RPMPD_VDDMX>; |
| 2454 |
power-domain-names = "cx", "mx"; |
| 2455 |
|
| 2456 |
qcom,smem-states = <&wcnss_smp2p_out 0>; |
| 2457 |
qcom,smem-state-names = "stop"; |
| 2458 |
|
| 2459 |
pinctrl-names = "default"; |
| 2460 |
pinctrl-0 = <&wcss_wlan_default>; |
| 2461 |
|
| 2462 |
status = "disabled"; |
| 2463 |
|
| 2464 |
wcnss_iris: iris { |
| 2465 |
/* Separate chip, compatible is board-specific */ |
| 2466 |
clocks = <&rpmcc RPM_SMD_RF_CLK2>; |
| 2467 |
clock-names = "xo"; |
| 2468 |
}; |
| 2469 |
|
| 2470 |
smd-edge { |
| 2471 |
interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; |
| 2472 |
|
| 2473 |
mboxes = <&apcs 17>; |
| 2474 |
qcom,smd-edge = <6>; |
| 2475 |
qcom,remote-pid = <4>; |
| 2476 |
|
| 2477 |
label = "pronto"; |
| 2478 |
|
| 2479 |
wcnss_ctrl: wcnss { |
| 2480 |
compatible = "qcom,wcnss"; |
| 2481 |
qcom,smd-channels = "WCNSS_CTRL"; |
| 2482 |
|
| 2483 |
qcom,mmio = <&wcnss>; |
| 2484 |
|
| 2485 |
wcnss_bt: bluetooth { |
| 2486 |
compatible = "qcom,wcnss-bt"; |
| 2487 |
}; |
| 2488 |
|
| 2489 |
wcnss_wifi: wifi { |
| 2490 |
compatible = "qcom,wcnss-wlan"; |
| 2491 |
|
| 2492 |
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| 2493 |
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; |
| 2494 |
interrupt-names = "tx", "rx"; |
| 2495 |
|
| 2496 |
qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; |
| 2497 |
qcom,smem-state-names = "tx-enable", "tx-rings-empty"; |
| 2498 |
}; |
| 2499 |
}; |
| 2500 |
}; |
| 2501 |
}; |
| 2502 |
|
| 2503 |
intc: interrupt-controller@b000000 { |
| 2504 |
compatible = "qcom,msm-qgic2"; |
| 2505 |
interrupt-controller; |
| 2506 |
#interrupt-cells = <3>; |
| 2507 |
reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>, |
| 2508 |
<0x0b001000 0x1000>, <0x0b004000 0x2000>; |
| 2509 |
interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 2510 |
}; |
| 2511 |
|
| 2512 |
apcs: mailbox@b011000 { |
| 2513 |
compatible = "qcom,msm8916-apcs-kpss-global", "syscon"; |
| 2514 |
reg = <0x0b011000 0x1000>; |
| 2515 |
#mbox-cells = <1>; |
| 2516 |
clocks = <&a53pll>, <&gcc GPLL0_VOTE>; |
| 2517 |
clock-names = "pll", "aux"; |
| 2518 |
#clock-cells = <0>; |
| 2519 |
}; |
| 2520 |
|
| 2521 |
a53pll: clock@b016000 { |
| 2522 |
compatible = "qcom,msm8916-a53pll"; |
| 2523 |
reg = <0x0b016000 0x40>; |
| 2524 |
#clock-cells = <0>; |
| 2525 |
clocks = <&xo_board>; |
| 2526 |
clock-names = "xo"; |
| 2527 |
}; |
| 2528 |
|
| 2529 |
timer@b020000 { |
| 2530 |
#address-cells = <1>; |
| 2531 |
#size-cells = <1>; |
| 2532 |
ranges; |
| 2533 |
compatible = "arm,armv7-timer-mem"; |
| 2534 |
reg = <0x0b020000 0x1000>; |
| 2535 |
clock-frequency = <19200000>; |
| 2536 |
|
| 2537 |
frame@b021000 { |
| 2538 |
frame-number = <0>; |
| 2539 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 2540 |
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 2541 |
reg = <0x0b021000 0x1000>, |
| 2542 |
<0x0b022000 0x1000>; |
| 2543 |
}; |
| 2544 |
|
| 2545 |
frame@b023000 { |
| 2546 |
frame-number = <1>; |
| 2547 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 2548 |
reg = <0x0b023000 0x1000>; |
| 2549 |
status = "disabled"; |
| 2550 |
}; |
| 2551 |
|
| 2552 |
frame@b024000 { |
| 2553 |
frame-number = <2>; |
| 2554 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 2555 |
reg = <0x0b024000 0x1000>; |
| 2556 |
status = "disabled"; |
| 2557 |
}; |
| 2558 |
|
| 2559 |
frame@b025000 { |
| 2560 |
frame-number = <3>; |
| 2561 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 2562 |
reg = <0x0b025000 0x1000>; |
| 2563 |
status = "disabled"; |
| 2564 |
}; |
| 2565 |
|
| 2566 |
frame@b026000 { |
| 2567 |
frame-number = <4>; |
| 2568 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 2569 |
reg = <0x0b026000 0x1000>; |
| 2570 |
status = "disabled"; |
| 2571 |
}; |
| 2572 |
|
| 2573 |
frame@b027000 { |
| 2574 |
frame-number = <5>; |
| 2575 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 2576 |
reg = <0x0b027000 0x1000>; |
| 2577 |
status = "disabled"; |
| 2578 |
}; |
| 2579 |
|
| 2580 |
frame@b028000 { |
| 2581 |
frame-number = <6>; |
| 2582 |
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 2583 |
reg = <0x0b028000 0x1000>; |
| 2584 |
status = "disabled"; |
| 2585 |
}; |
| 2586 |
}; |
| 2587 |
|
| 2588 |
cpu0_acc: power-manager@b088000 { |
| 2589 |
compatible = "qcom,msm8916-acc"; |
| 2590 |
reg = <0x0b088000 0x1000>; |
| 2591 |
status = "reserved"; /* Controlled by PSCI firmware */ |
| 2592 |
}; |
| 2593 |
|
| 2594 |
cpu0_saw: power-manager@b089000 { |
| 2595 |
compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; |
| 2596 |
reg = <0x0b089000 0x1000>; |
| 2597 |
status = "reserved"; /* Controlled by PSCI firmware */ |
| 2598 |
}; |
| 2599 |
|
| 2600 |
cpu1_acc: power-manager@b098000 { |
| 2601 |
compatible = "qcom,msm8916-acc"; |
| 2602 |
reg = <0x0b098000 0x1000>; |
| 2603 |
status = "reserved"; /* Controlled by PSCI firmware */ |
| 2604 |
}; |
| 2605 |
|
| 2606 |
cpu1_saw: power-manager@b099000 { |
| 2607 |
compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; |
| 2608 |
reg = <0x0b099000 0x1000>; |
| 2609 |
status = "reserved"; /* Controlled by PSCI firmware */ |
| 2610 |
}; |
| 2611 |
|
| 2612 |
cpu2_acc: power-manager@b0a8000 { |
| 2613 |
compatible = "qcom,msm8916-acc"; |
| 2614 |
reg = <0x0b0a8000 0x1000>; |
| 2615 |
status = "reserved"; /* Controlled by PSCI firmware */ |
| 2616 |
}; |
| 2617 |
|
| 2618 |
cpu2_saw: power-manager@b0a9000 { |
| 2619 |
compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; |
| 2620 |
reg = <0x0b0a9000 0x1000>; |
| 2621 |
status = "reserved"; /* Controlled by PSCI firmware */ |
| 2622 |
}; |
| 2623 |
|
| 2624 |
cpu3_acc: power-manager@b0b8000 { |
| 2625 |
compatible = "qcom,msm8916-acc"; |
| 2626 |
reg = <0x0b0b8000 0x1000>; |
| 2627 |
status = "reserved"; /* Controlled by PSCI firmware */ |
| 2628 |
}; |
| 2629 |
|
| 2630 |
cpu3_saw: power-manager@b0b9000 { |
| 2631 |
compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; |
| 2632 |
reg = <0x0b0b9000 0x1000>; |
| 2633 |
status = "reserved"; /* Controlled by PSCI firmware */ |
| 2634 |
}; |
| 2635 |
}; |
| 2636 |
|
| 2637 |
thermal-zones { |
| 2638 |
cpu0-1-thermal { |
| 2639 |
polling-delay-passive = <250>; |
| 2640 |
|
| 2641 |
thermal-sensors = <&tsens 5>; |
| 2642 |
|
| 2643 |
trips { |
| 2644 |
cpu0_1_alert0: trip-point0 { |
| 2645 |
temperature = <75000>; |
| 2646 |
hysteresis = <2000>; |
| 2647 |
type = "passive"; |
| 2648 |
}; |
| 2649 |
cpu0_1_crit: cpu-crit { |
| 2650 |
temperature = <110000>; |
| 2651 |
hysteresis = <2000>; |
| 2652 |
type = "critical"; |
| 2653 |
}; |
| 2654 |
}; |
| 2655 |
|
| 2656 |
cooling-maps { |
| 2657 |
map0 { |
| 2658 |
trip = <&cpu0_1_alert0>; |
| 2659 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2660 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2661 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2662 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 2663 |
}; |
| 2664 |
}; |
| 2665 |
}; |
| 2666 |
|
| 2667 |
cpu2-3-thermal { |
| 2668 |
polling-delay-passive = <250>; |
| 2669 |
|
| 2670 |
thermal-sensors = <&tsens 4>; |
| 2671 |
|
| 2672 |
trips { |
| 2673 |
cpu2_3_alert0: trip-point0 { |
| 2674 |
temperature = <75000>; |
| 2675 |
hysteresis = <2000>; |
| 2676 |
type = "passive"; |
| 2677 |
}; |
| 2678 |
cpu2_3_crit: cpu-crit { |
| 2679 |
temperature = <110000>; |
| 2680 |
hysteresis = <2000>; |
| 2681 |
type = "critical"; |
| 2682 |
}; |
| 2683 |
}; |
| 2684 |
|
| 2685 |
cooling-maps { |
| 2686 |
map0 { |
| 2687 |
trip = <&cpu2_3_alert0>; |
| 2688 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2689 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2690 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 2691 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 2692 |
}; |
| 2693 |
}; |
| 2694 |
}; |
| 2695 |
|
| 2696 |
gpu-thermal { |
| 2697 |
polling-delay-passive = <250>; |
| 2698 |
|
| 2699 |
thermal-sensors = <&tsens 2>; |
| 2700 |
|
| 2701 |
cooling-maps { |
| 2702 |
map0 { |
| 2703 |
trip = <&gpu_alert0>; |
| 2704 |
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 2705 |
}; |
| 2706 |
}; |
| 2707 |
|
| 2708 |
trips { |
| 2709 |
gpu_alert0: trip-point0 { |
| 2710 |
temperature = <75000>; |
| 2711 |
hysteresis = <2000>; |
| 2712 |
type = "passive"; |
| 2713 |
}; |
| 2714 |
gpu_crit: gpu-crit { |
| 2715 |
temperature = <95000>; |
| 2716 |
hysteresis = <2000>; |
| 2717 |
type = "critical"; |
| 2718 |
}; |
| 2719 |
}; |
| 2720 |
}; |
| 2721 |
|
| 2722 |
camera-thermal { |
| 2723 |
polling-delay-passive = <250>; |
| 2724 |
|
| 2725 |
thermal-sensors = <&tsens 1>; |
| 2726 |
|
| 2727 |
trips { |
| 2728 |
cam_alert0: trip-point0 { |
| 2729 |
temperature = <75000>; |
| 2730 |
hysteresis = <2000>; |
| 2731 |
type = "hot"; |
| 2732 |
}; |
| 2733 |
}; |
| 2734 |
}; |
| 2735 |
|
| 2736 |
modem-thermal { |
| 2737 |
polling-delay-passive = <250>; |
| 2738 |
|
| 2739 |
thermal-sensors = <&tsens 0>; |
| 2740 |
|
| 2741 |
trips { |
| 2742 |
modem_alert0: trip-point0 { |
| 2743 |
temperature = <85000>; |
| 2744 |
hysteresis = <2000>; |
| 2745 |
type = "hot"; |
| 2746 |
}; |
| 2747 |
}; |
| 2748 |
}; |
| 2749 |
}; |
| 2750 |
|
| 2751 |
timer { |
| 2752 |
compatible = "arm,armv8-timer"; |
| 2753 |
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 2754 |
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 2755 |
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 2756 |
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| 2757 |
}; |
| 2758 |
}; |