| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2020 Stephan Gerhold |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include "msm8916-pm8916.dtsi" |
| 9 |
#include "msm8916-modem-qdsp6.dtsi" |
| 10 |
|
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include <dt-bindings/input/input.h> |
| 13 |
#include <dt-bindings/leds/common.h> |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Xiaomi Redmi 2 (Wingtech WT88047)"; |
| 17 |
compatible = "wingtech,wt88047", "qcom,msm8916"; |
| 18 |
chassis-type = "handset"; |
| 19 |
|
| 20 |
aliases { |
| 21 |
mmc0 = &sdhc_1; /* eMMC */ |
| 22 |
mmc1 = &sdhc_2; /* SD card */ |
| 23 |
serial0 = &blsp_uart2; |
| 24 |
}; |
| 25 |
|
| 26 |
chosen { |
| 27 |
stdout-path = "serial0"; |
| 28 |
}; |
| 29 |
|
| 30 |
speaker_amp: audio-amplifier { |
| 31 |
compatible = "simple-audio-amplifier"; |
| 32 |
enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; |
| 33 |
sound-name-prefix = "Speaker Amp"; |
| 34 |
pinctrl-0 = <&speaker_amp_default>; |
| 35 |
pinctrl-names = "default"; |
| 36 |
}; |
| 37 |
|
| 38 |
/* |
| 39 |
* This seems to be actually an analog switch that either routes audio |
| 40 |
* to the headphone jack or nowhere. Given that we need to enable a GPIO |
| 41 |
* to get sound on headphones, modelling it as simple-audio-amplifier |
| 42 |
* works just fine. |
| 43 |
*/ |
| 44 |
headphones_switch: audio-switch { |
| 45 |
compatible = "simple-audio-amplifier"; |
| 46 |
enable-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; |
| 47 |
sound-name-prefix = "Headphones Switch"; |
| 48 |
pinctrl-0 = <&headphones_switch_default>; |
| 49 |
pinctrl-names = "default"; |
| 50 |
}; |
| 51 |
|
| 52 |
flash-led-controller { |
| 53 |
compatible = "ocs,ocp8110"; |
| 54 |
enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; |
| 55 |
flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; |
| 56 |
|
| 57 |
pinctrl-names = "default"; |
| 58 |
pinctrl-0 = <&camera_flash_default>; |
| 59 |
|
| 60 |
flash_led: led { |
| 61 |
function = LED_FUNCTION_FLASH; |
| 62 |
color = <LED_COLOR_ID_WHITE>; |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
gpio-keys { |
| 67 |
compatible = "gpio-keys"; |
| 68 |
|
| 69 |
pinctrl-names = "default"; |
| 70 |
pinctrl-0 = <&gpio_keys_default>; |
| 71 |
|
| 72 |
label = "GPIO Buttons"; |
| 73 |
|
| 74 |
button-volume-up { |
| 75 |
label = "Volume Up"; |
| 76 |
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; |
| 77 |
linux,code = <KEY_VOLUMEUP>; |
| 78 |
}; |
| 79 |
}; |
| 80 |
|
| 81 |
usb_id: usb-id { |
| 82 |
compatible = "linux,extcon-usb-gpio"; |
| 83 |
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; |
| 84 |
pinctrl-names = "default"; |
| 85 |
pinctrl-0 = <&usb_id_default>; |
| 86 |
}; |
| 87 |
}; |
| 88 |
|
| 89 |
&blsp_i2c2 { |
| 90 |
status = "okay"; |
| 91 |
|
| 92 |
imu@68 { |
| 93 |
compatible = "invensense,mpu6880"; |
| 94 |
reg = <0x68>; |
| 95 |
|
| 96 |
interrupt-parent = <&tlmm>; |
| 97 |
interrupts = <115 IRQ_TYPE_EDGE_RISING>; |
| 98 |
|
| 99 |
vdd-supply = <&pm8916_l17>; |
| 100 |
vddio-supply = <&pm8916_l6>; |
| 101 |
|
| 102 |
pinctrl-names = "default"; |
| 103 |
pinctrl-0 = <&imu_default>; |
| 104 |
|
| 105 |
mount-matrix = "1", "0", "0", |
| 106 |
"0", "-1", "0", |
| 107 |
"0", "0", "1"; |
| 108 |
}; |
| 109 |
}; |
| 110 |
|
| 111 |
&blsp_i2c5 { |
| 112 |
status = "okay"; |
| 113 |
|
| 114 |
touchscreen@38 { |
| 115 |
/* Likely some other model but works just fine with this one */ |
| 116 |
compatible = "edt,edt-ft5506"; |
| 117 |
reg = <0x38>; |
| 118 |
|
| 119 |
interrupt-parent = <&tlmm>; |
| 120 |
interrupts = <13 IRQ_TYPE_EDGE_FALLING>; |
| 121 |
|
| 122 |
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; |
| 123 |
|
| 124 |
vcc-supply = <&pm8916_l17>; |
| 125 |
iovcc-supply = <&pm8916_l6>; |
| 126 |
|
| 127 |
touchscreen-size-x = <720>; |
| 128 |
touchscreen-size-y = <1280>; |
| 129 |
|
| 130 |
pinctrl-names = "default"; |
| 131 |
pinctrl-0 = <&touchscreen_default>; |
| 132 |
}; |
| 133 |
}; |
| 134 |
|
| 135 |
&blsp_i2c6 { |
| 136 |
status = "okay"; |
| 137 |
|
| 138 |
led-controller@45 { |
| 139 |
compatible = "awinic,aw2013"; |
| 140 |
reg = <0x45>; |
| 141 |
#address-cells = <1>; |
| 142 |
#size-cells = <0>; |
| 143 |
|
| 144 |
vcc-supply = <&pm8916_l16>; |
| 145 |
vio-supply = <&pm8916_l5>; |
| 146 |
|
| 147 |
led@0 { |
| 148 |
reg = <0>; |
| 149 |
led-max-microamp = <15000>; |
| 150 |
function = LED_FUNCTION_INDICATOR; |
| 151 |
color = <LED_COLOR_ID_RED>; |
| 152 |
}; |
| 153 |
|
| 154 |
led@1 { |
| 155 |
reg = <1>; |
| 156 |
led-max-microamp = <15000>; |
| 157 |
function = LED_FUNCTION_INDICATOR; |
| 158 |
color = <LED_COLOR_ID_GREEN>; |
| 159 |
}; |
| 160 |
|
| 161 |
led@2 { |
| 162 |
reg = <2>; |
| 163 |
led-max-microamp = <15000>; |
| 164 |
function = LED_FUNCTION_INDICATOR; |
| 165 |
color = <LED_COLOR_ID_BLUE>; |
| 166 |
}; |
| 167 |
}; |
| 168 |
}; |
| 169 |
|
| 170 |
&blsp_uart2 { |
| 171 |
status = "okay"; |
| 172 |
pinctrl-0 = <&blsp_uart2_console_default>; |
| 173 |
pinctrl-1 = <&blsp_uart2_console_sleep>; |
| 174 |
pinctrl-names = "default", "sleep"; |
| 175 |
}; |
| 176 |
|
| 177 |
&mpss_mem { |
| 178 |
reg = <0x0 0x86800000 0x0 0x5100000>; |
| 179 |
}; |
| 180 |
|
| 181 |
&pm8916_codec { |
| 182 |
qcom,micbias1-ext-cap; |
| 183 |
qcom,micbias-lvl = <2800>; |
| 184 |
qcom,mbhc-vthreshold-low = <75 100 120 180 500>; |
| 185 |
qcom,mbhc-vthreshold-high = <75 100 120 180 500>; |
| 186 |
qcom,hphl-jack-type-normally-open; |
| 187 |
}; |
| 188 |
|
| 189 |
&pm8916_resin { |
| 190 |
status = "okay"; |
| 191 |
linux,code = <KEY_VOLUMEDOWN>; |
| 192 |
}; |
| 193 |
|
| 194 |
&pm8916_rpm_regulators { |
| 195 |
pm8916_l16: l16 { |
| 196 |
/* |
| 197 |
* L16 is only used for AW2013 which is fine with 2.5-3.3V. |
| 198 |
* Use the recommended typical voltage of 2.8V as minimum. |
| 199 |
*/ |
| 200 |
regulator-min-microvolt = <2800000>; |
| 201 |
regulator-max-microvolt = <3300000>; |
| 202 |
}; |
| 203 |
|
| 204 |
pm8916_l17: l17 { |
| 205 |
regulator-min-microvolt = <2850000>; |
| 206 |
regulator-max-microvolt = <2850000>; |
| 207 |
}; |
| 208 |
}; |
| 209 |
|
| 210 |
&pm8916_vib { |
| 211 |
status = "okay"; |
| 212 |
}; |
| 213 |
|
| 214 |
&sdhc_1 { |
| 215 |
status = "okay"; |
| 216 |
}; |
| 217 |
|
| 218 |
&sdhc_2 { |
| 219 |
status = "okay"; |
| 220 |
non-removable; |
| 221 |
}; |
| 222 |
|
| 223 |
&sound { |
| 224 |
/* |
| 225 |
* Provide widgets/pin-switches to allow enabling speaker and headphones |
| 226 |
* separately. Both are routed via the HPH_L/HPH_R pins of the codec. |
| 227 |
*/ |
| 228 |
model = "wt88047"; |
| 229 |
widgets = |
| 230 |
"Speaker", "Speaker", |
| 231 |
"Headphone", "Headphones"; |
| 232 |
pin-switches = "Speaker", "Headphones"; |
| 233 |
audio-routing = |
| 234 |
"Speaker", "Speaker Amp OUTL", |
| 235 |
"Speaker", "Speaker Amp OUTR", |
| 236 |
"Speaker Amp INL", "HPH_R", |
| 237 |
"Speaker Amp INR", "HPH_R", |
| 238 |
"Headphones", "Headphones Switch OUTL", |
| 239 |
"Headphones", "Headphones Switch OUTR", |
| 240 |
"Headphones Switch INL", "HPH_L", |
| 241 |
"Headphones Switch INR", "HPH_R", |
| 242 |
"AMIC1", "MIC BIAS External1", |
| 243 |
"AMIC2", "MIC BIAS Internal2"; |
| 244 |
aux-devs = <&speaker_amp>, <&headphones_switch>; |
| 245 |
}; |
| 246 |
|
| 247 |
&usb { |
| 248 |
status = "okay"; |
| 249 |
extcon = <&usb_id>, <&usb_id>; |
| 250 |
}; |
| 251 |
|
| 252 |
&usb_hs_phy { |
| 253 |
extcon = <&usb_id>; |
| 254 |
}; |
| 255 |
|
| 256 |
&venus { |
| 257 |
status = "okay"; |
| 258 |
}; |
| 259 |
|
| 260 |
&venus_mem { |
| 261 |
status = "okay"; |
| 262 |
}; |
| 263 |
|
| 264 |
&wcnss { |
| 265 |
status = "okay"; |
| 266 |
}; |
| 267 |
|
| 268 |
&wcnss_iris { |
| 269 |
compatible = "qcom,wcn3620"; |
| 270 |
}; |
| 271 |
|
| 272 |
&wcnss_mem { |
| 273 |
status = "okay"; |
| 274 |
}; |
| 275 |
|
| 276 |
&tlmm { |
| 277 |
camera_flash_default: camera-flash-default-state { |
| 278 |
pins = "gpio31", "gpio32"; |
| 279 |
function = "gpio"; |
| 280 |
|
| 281 |
drive-strength = <2>; |
| 282 |
bias-disable; |
| 283 |
}; |
| 284 |
|
| 285 |
gpio_keys_default: gpio-keys-default-state { |
| 286 |
pins = "gpio107"; |
| 287 |
function = "gpio"; |
| 288 |
|
| 289 |
drive-strength = <2>; |
| 290 |
bias-pull-up; |
| 291 |
}; |
| 292 |
|
| 293 |
headphones_switch_default: headphones-switch-default-state { |
| 294 |
pins = "gpio8"; |
| 295 |
function = "gpio"; |
| 296 |
drive-strength = <2>; |
| 297 |
bias-disable; |
| 298 |
}; |
| 299 |
|
| 300 |
imu_default: imu-default-state { |
| 301 |
pins = "gpio115"; |
| 302 |
function = "gpio"; |
| 303 |
|
| 304 |
drive-strength = <2>; |
| 305 |
bias-disable; |
| 306 |
}; |
| 307 |
|
| 308 |
speaker_amp_default: speaker-amp-default-state { |
| 309 |
pins = "gpio117"; |
| 310 |
function = "gpio"; |
| 311 |
drive-strength = <2>; |
| 312 |
bias-disable; |
| 313 |
}; |
| 314 |
|
| 315 |
touchscreen_default: touchscreen-default-state { |
| 316 |
touchscreen-pins { |
| 317 |
pins = "gpio13"; |
| 318 |
function = "gpio"; |
| 319 |
|
| 320 |
drive-strength = <2>; |
| 321 |
bias-pull-up; |
| 322 |
}; |
| 323 |
reset-pins { |
| 324 |
pins = "gpio12"; |
| 325 |
function = "gpio"; |
| 326 |
|
| 327 |
drive-strength = <2>; |
| 328 |
bias-disable; |
| 329 |
}; |
| 330 |
}; |
| 331 |
|
| 332 |
usb_id_default: usb-id-default-state { |
| 333 |
pins = "gpio110"; |
| 334 |
function = "gpio"; |
| 335 |
|
| 336 |
drive-strength = <8>; |
| 337 |
bias-pull-up; |
| 338 |
}; |
| 339 |
}; |