| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
|
| 3 |
#include "msm8916-pm8916.dtsi" |
| 4 |
#include "msm8916-modem-qdsp6.dtsi" |
| 5 |
|
| 6 |
#include <dt-bindings/gpio/gpio.h> |
| 7 |
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> |
| 8 |
|
| 9 |
/ { |
| 10 |
aliases { |
| 11 |
mmc0 = &sdhc_1; /* eMMC */ |
| 12 |
mmc1 = &sdhc_2; /* SD card */ |
| 13 |
serial0 = &blsp_uart2; |
| 14 |
}; |
| 15 |
|
| 16 |
chosen { |
| 17 |
stdout-path = "serial0"; |
| 18 |
}; |
| 19 |
|
| 20 |
headphones_switch: audio-switch { |
| 21 |
compatible = "simple-audio-amplifier"; |
| 22 |
|
| 23 |
pinctrl-0 = <&headphones_switch_default>; |
| 24 |
pinctrl-names = "default"; |
| 25 |
|
| 26 |
enable-gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>; |
| 27 |
sound-name-prefix = "Headphones Switch"; |
| 28 |
}; |
| 29 |
|
| 30 |
backlight: backlight { |
| 31 |
compatible = "pwm-backlight"; |
| 32 |
pwms = <&pm8916_pwm 0 100000>; |
| 33 |
|
| 34 |
brightness-levels = <0 255>; |
| 35 |
num-interpolated-steps = <255>; |
| 36 |
default-brightness-level = <255>; |
| 37 |
}; |
| 38 |
|
| 39 |
battery: battery { |
| 40 |
compatible = "simple-battery"; |
| 41 |
voltage-min-design-microvolt = <3400000>; |
| 42 |
voltage-max-design-microvolt = <4350000>; |
| 43 |
energy-full-design-microwatt-hours = <8740000>; |
| 44 |
charge-full-design-microamp-hours = <2300000>; |
| 45 |
|
| 46 |
ocv-capacity-celsius = <25>; |
| 47 |
ocv-capacity-table-0 = <4328000 100>, <4266000 95>, <4208000 90>, |
| 48 |
<4154000 85>, <4102000 80>, <4062000 75>, <3992000 70>, |
| 49 |
<3960000 65>, <3914000 60>, <3870000 55>, <3840000 50>, |
| 50 |
<3818000 45>, <3800000 40>, <3784000 35>, <3770000 30>, |
| 51 |
<3756000 25>, <3736000 20>, <3714000 16>, <3696000 13>, |
| 52 |
<3690000 11>, <3689000 10>, <3688000 9>, <3686000 8>, |
| 53 |
<3682000 7>, <3670000 6>, <3639000 5>, <3592000 4>, |
| 54 |
<3530000 3>, <3448000 2>, <3320000 1>, <3000000 0>; |
| 55 |
}; |
| 56 |
|
| 57 |
gpio-keys { |
| 58 |
compatible = "gpio-keys"; |
| 59 |
|
| 60 |
pinctrl-0 = <&gpio_keys_default>; |
| 61 |
pinctrl-names = "default"; |
| 62 |
|
| 63 |
label = "GPIO Buttons"; |
| 64 |
|
| 65 |
volume-up-button { |
| 66 |
label = "Volume Up"; |
| 67 |
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; |
| 68 |
linux,code = <KEY_VOLUMEUP>; |
| 69 |
}; |
| 70 |
}; |
| 71 |
}; |
| 72 |
|
| 73 |
&blsp_i2c5 { |
| 74 |
status = "okay"; |
| 75 |
|
| 76 |
touchscreen@38 { |
| 77 |
compatible = "edt,edt-ft5306"; |
| 78 |
reg = <0x38>; |
| 79 |
|
| 80 |
interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; |
| 81 |
|
| 82 |
vcc-supply = <&pm8916_l17>; |
| 83 |
iovcc-supply = <&pm8916_l6>; |
| 84 |
|
| 85 |
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; |
| 86 |
|
| 87 |
touchscreen-size-x = <720>; |
| 88 |
touchscreen-size-y = <1280>; |
| 89 |
|
| 90 |
pinctrl-0 = <&touchscreen_default>; |
| 91 |
pinctrl-names = "default"; |
| 92 |
}; |
| 93 |
}; |
| 94 |
|
| 95 |
&blsp_uart2 { |
| 96 |
pinctrl-0 = <&blsp_uart2_console_default>; |
| 97 |
pinctrl-1 = <&blsp_uart2_console_sleep>; |
| 98 |
pinctrl-names = "default", "sleep"; |
| 99 |
status = "okay"; |
| 100 |
}; |
| 101 |
|
| 102 |
&mpss_mem { |
| 103 |
reg = <0x0 0x86800000 0x0 0x5500000>; |
| 104 |
}; |
| 105 |
|
| 106 |
&pm8916_bms { |
| 107 |
monitored-battery = <&battery>; |
| 108 |
status = "okay"; |
| 109 |
}; |
| 110 |
|
| 111 |
&pm8916_codec { |
| 112 |
qcom,micbias-lvl = <2800>; |
| 113 |
qcom,mbhc-vthreshold-low = <75 150 237 450 500>; |
| 114 |
qcom,mbhc-vthreshold-high = <75 150 237 450 500>; |
| 115 |
qcom,hphl-jack-type-normally-open; |
| 116 |
}; |
| 117 |
|
| 118 |
&pm8916_pwm { |
| 119 |
pinctrl-0 = <&pwm_out>; |
| 120 |
pinctrl-names = "default"; |
| 121 |
status = "okay"; |
| 122 |
}; |
| 123 |
|
| 124 |
&pm8916_resin { |
| 125 |
linux,code = <KEY_VOLUMEDOWN>; |
| 126 |
status = "okay"; |
| 127 |
}; |
| 128 |
|
| 129 |
&pm8916_rpm_regulators { |
| 130 |
pm8916_l17: l17 { |
| 131 |
regulator-min-microvolt = <2850000>; |
| 132 |
regulator-max-microvolt = <2850000>; |
| 133 |
}; |
| 134 |
}; |
| 135 |
|
| 136 |
&pm8916_vib { |
| 137 |
status = "okay"; |
| 138 |
}; |
| 139 |
|
| 140 |
&sdhc_1 { |
| 141 |
status = "okay"; |
| 142 |
}; |
| 143 |
|
| 144 |
&sdhc_2 { |
| 145 |
pinctrl-0 = <&sdc2_default>; |
| 146 |
pinctrl-1 = <&sdc2_sleep>; |
| 147 |
pinctrl-names = "default", "sleep"; |
| 148 |
|
| 149 |
non-removable; |
| 150 |
|
| 151 |
status = "okay"; |
| 152 |
}; |
| 153 |
|
| 154 |
&usb { |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
&venus { |
| 159 |
status = "okay"; |
| 160 |
}; |
| 161 |
|
| 162 |
&venus_mem { |
| 163 |
status = "okay"; |
| 164 |
}; |
| 165 |
|
| 166 |
&wcnss { |
| 167 |
status = "okay"; |
| 168 |
}; |
| 169 |
|
| 170 |
&wcnss_iris { |
| 171 |
compatible = "qcom,wcn3620"; |
| 172 |
}; |
| 173 |
|
| 174 |
&wcnss_mem { |
| 175 |
status = "okay"; |
| 176 |
}; |
| 177 |
|
| 178 |
&tlmm { |
| 179 |
gpio_keys_default: gpio-keys-default-state { |
| 180 |
pins = "gpio107"; |
| 181 |
function = "gpio"; |
| 182 |
drive-strength = <2>; |
| 183 |
bias-pull-up; |
| 184 |
}; |
| 185 |
|
| 186 |
headphones_switch_default: headphones-switch-default-state { |
| 187 |
pins = "gpio120"; |
| 188 |
function = "gpio"; |
| 189 |
drive-strength = <2>; |
| 190 |
bias-disable; |
| 191 |
}; |
| 192 |
|
| 193 |
touchscreen_default: touchscreen-default-state { |
| 194 |
touchscreen-pins { |
| 195 |
pins = "gpio13"; |
| 196 |
function = "gpio"; |
| 197 |
drive-strength = <2>; |
| 198 |
bias-pull-up; |
| 199 |
}; |
| 200 |
|
| 201 |
reset-pins { |
| 202 |
pins = "gpio12"; |
| 203 |
function = "gpio"; |
| 204 |
drive-strength = <2>; |
| 205 |
bias-disable; |
| 206 |
}; |
| 207 |
}; |
| 208 |
}; |
| 209 |
|
| 210 |
&pm8916_mpps { |
| 211 |
pwm_out: mpp4-state { |
| 212 |
pins = "mpp4"; |
| 213 |
function = "digital"; |
| 214 |
power-source = <PM8916_MPP_VPH>; |
| 215 |
output-low; |
| 216 |
qcom,dtest = <1>; |
| 217 |
}; |
| 218 |
}; |