Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/msm8916-ufi.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0-only
2
3 #include "msm8916-pm8916.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/leds/common.h>
7
8 / {
9 chassis-type = "embedded";
10
11 aliases {
12 mmc0 = &sdhc_1; /* eMMC */
13 serial0 = &blsp_uart2;
14 };
15
16 chosen {
17 stdout-path = "serial0";
18 };
19
20 gpio-keys {
21 compatible = "gpio-keys";
22
23 pinctrl-0 = <&button_default>;
24 pinctrl-names = "default";
25
26 label = "GPIO Buttons";
27
28 /* GPIO is board-specific */
29 button_restart: button-restart {
30 label = "Restart";
31 linux,code = <KEY_RESTART>;
32 };
33 };
34
35 leds {
36 compatible = "gpio-leds";
37
38 pinctrl-0 = <&gpio_leds_default>;
39 pinctrl-names = "default";
40
41 /*
42 * GPIOs are board-specific.
43 * Functions and default-states defined here are fallbacks.
44 * Feel free to override them if your board is different.
45 */
46 led_r: led-r {
47 color = <LED_COLOR_ID_RED>;
48 default-state = "on";
49 function = LED_FUNCTION_POWER;
50 };
51
52 led_g: led-g {
53 color = <LED_COLOR_ID_GREEN>;
54 default-state = "off";
55 function = LED_FUNCTION_WLAN;
56 };
57
58 led_b: led-b {
59 color = <LED_COLOR_ID_BLUE>;
60 default-state = "off";
61 function = LED_FUNCTION_WAN;
62 };
63 };
64 };
65
66 &bam_dmux {
67 status = "okay";
68 };
69
70 &bam_dmux_dma {
71 status = "okay";
72 };
73
74 &blsp_uart2 {
75 pinctrl-0 = <&blsp_uart2_console_default>;
76 pinctrl-1 = <&blsp_uart2_console_sleep>;
77 pinctrl-names = "default", "sleep";
78 status = "okay";
79 };
80
81 /* Remove &mdss_dsi0_phy from clocks to make sure that gcc probes with display disabled */
82 &gcc {
83 clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>;
84 };
85
86 &mba_mem {
87 status = "okay";
88 };
89
90 &mpss {
91 status = "okay";
92 };
93
94 &mpss_mem {
95 reg = <0x0 0x86800000 0x0 0x5500000>;
96 status = "okay";
97 };
98
99 &pm8916_usbin {
100 status = "okay";
101 };
102
103 &sdhc_1 {
104 status = "okay";
105 };
106
107 &usb {
108 extcon = <&pm8916_usbin>;
109 usb-role-switch;
110
111 status = "okay";
112 };
113
114 &usb_hs_phy {
115 extcon = <&pm8916_usbin>;
116 };
117
118 &venus {
119 status = "okay";
120 };
121
122 &venus_mem {
123 status = "okay";
124 };
125
126 &wcnss {
127 status = "okay";
128 };
129
130 &wcnss_iris {
131 compatible = "qcom,wcn3620";
132 };
133
134 &wcnss_mem {
135 status = "okay";
136 };
137
138 &tlmm {
139 /* pins are board-specific */
140 button_default: button-default-state {
141 function = "gpio";
142 drive-strength = <2>;
143 };
144
145 gpio_leds_default: gpio-leds-default-state {
146 function = "gpio";
147 drive-strength = <2>;
148 bias-disable;
149 };
150 };