| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
|
| 3 |
#include "msm8916-samsung-a2015-common.dtsi" |
| 4 |
|
| 5 |
/ { |
| 6 |
haptic { |
| 7 |
compatible = "regulator-haptic"; |
| 8 |
haptic-supply = <®_motor_vdd>; |
| 9 |
min-microvolt = <3300000>; |
| 10 |
max-microvolt = <3300000>; |
| 11 |
}; |
| 12 |
|
| 13 |
i2c-muic { |
| 14 |
/* SM5504 MUIC instead of SM5502 */ |
| 15 |
/delete-node/ extcon@25; |
| 16 |
|
| 17 |
muic: extcon@14 { |
| 18 |
compatible = "siliconmitus,sm5504-muic"; |
| 19 |
reg = <0x14>; |
| 20 |
|
| 21 |
interrupt-parent = <&tlmm>; |
| 22 |
interrupts = <12 IRQ_TYPE_EDGE_FALLING>; |
| 23 |
|
| 24 |
pinctrl-names = "default"; |
| 25 |
pinctrl-0 = <&muic_int_default>; |
| 26 |
|
| 27 |
usb_con: connector { |
| 28 |
compatible = "usb-b-connector"; |
| 29 |
label = "micro-USB"; |
| 30 |
type = "micro"; |
| 31 |
}; |
| 32 |
}; |
| 33 |
}; |
| 34 |
|
| 35 |
reg_touch_key: regulator-touch-key { |
| 36 |
compatible = "regulator-fixed"; |
| 37 |
regulator-name = "touch_key"; |
| 38 |
regulator-min-microvolt = <3300000>; |
| 39 |
regulator-max-microvolt = <3300000>; |
| 40 |
|
| 41 |
gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>; |
| 42 |
enable-active-high; |
| 43 |
|
| 44 |
pinctrl-names = "default"; |
| 45 |
pinctrl-0 = <&tkey_en_default>; |
| 46 |
}; |
| 47 |
}; |
| 48 |
|
| 49 |
&blsp_i2c2 { |
| 50 |
/* lis2hh12 accelerometer instead of BMC150 */ |
| 51 |
/delete-node/ accelerometer@10; |
| 52 |
/delete-node/ magnetometer@12; |
| 53 |
|
| 54 |
accelerometer@1d { |
| 55 |
compatible = "st,lis2hh12"; |
| 56 |
reg = <0x1d>; |
| 57 |
|
| 58 |
interrupt-parent = <&tlmm>; |
| 59 |
interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; |
| 60 |
|
| 61 |
vdd-supply = <&pm8916_l5>; |
| 62 |
vddio-supply = <&pm8916_l5>; |
| 63 |
|
| 64 |
st,drdy-int-pin = <1>; |
| 65 |
mount-matrix = "1", "0", "0", |
| 66 |
"0", "-1", "0", |
| 67 |
"0", "0", "1"; |
| 68 |
|
| 69 |
pinctrl-0 = <&accel_int_default>; |
| 70 |
pinctrl-names = "default"; |
| 71 |
}; |
| 72 |
}; |
| 73 |
|
| 74 |
&mpss_mem { |
| 75 |
reg = <0x0 0x86800000 0x0 0x5a00000>; |
| 76 |
}; |
| 77 |
|
| 78 |
®_motor_vdd { |
| 79 |
regulator-min-microvolt = <3300000>; |
| 80 |
regulator-max-microvolt = <3300000>; |
| 81 |
}; |
| 82 |
|
| 83 |
&touchkey { |
| 84 |
vcc-supply = <®_touch_key>; |
| 85 |
vdd-supply = <®_touch_key>; |
| 86 |
}; |
| 87 |
|
| 88 |
&wcnss { |
| 89 |
status = "okay"; |
| 90 |
}; |
| 91 |
|
| 92 |
&wcnss_iris { |
| 93 |
compatible = "qcom,wcn3620"; |
| 94 |
}; |
| 95 |
|
| 96 |
&wcnss_mem { |
| 97 |
status = "okay"; |
| 98 |
}; |
| 99 |
|
| 100 |
&tlmm { |
| 101 |
tkey_en_default: tkey-en-default-state { |
| 102 |
pins = "gpio97"; |
| 103 |
function = "gpio"; |
| 104 |
|
| 105 |
drive-strength = <2>; |
| 106 |
bias-disable; |
| 107 |
}; |
| 108 |
}; |