| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include "msm8916-samsung-a2015-common.dtsi" |
| 6 |
|
| 7 |
/ { |
| 8 |
model = "Samsung Galaxy A3U (EUR)"; |
| 9 |
compatible = "samsung,a3u-eur", "qcom,msm8916"; |
| 10 |
chassis-type = "handset"; |
| 11 |
|
| 12 |
reg_panel_vdd3: regulator-panel-vdd3 { |
| 13 |
compatible = "regulator-fixed"; |
| 14 |
regulator-name = "panel_vdd3"; |
| 15 |
regulator-min-microvolt = <1800000>; |
| 16 |
regulator-max-microvolt = <1800000>; |
| 17 |
|
| 18 |
gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; |
| 19 |
enable-active-high; |
| 20 |
|
| 21 |
pinctrl-names = "default"; |
| 22 |
pinctrl-0 = <&panel_vdd3_default>; |
| 23 |
}; |
| 24 |
|
| 25 |
reg_touch_key: regulator-touch-key { |
| 26 |
compatible = "regulator-fixed"; |
| 27 |
regulator-name = "touch_key"; |
| 28 |
regulator-min-microvolt = <2800000>; |
| 29 |
regulator-max-microvolt = <2800000>; |
| 30 |
|
| 31 |
gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; |
| 32 |
enable-active-high; |
| 33 |
|
| 34 |
pinctrl-names = "default"; |
| 35 |
pinctrl-0 = <&tkey_en_default>; |
| 36 |
}; |
| 37 |
|
| 38 |
reg_key_led: regulator-key-led { |
| 39 |
compatible = "regulator-fixed"; |
| 40 |
regulator-name = "key_led"; |
| 41 |
regulator-min-microvolt = <3300000>; |
| 42 |
regulator-max-microvolt = <3300000>; |
| 43 |
|
| 44 |
gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>; |
| 45 |
enable-active-high; |
| 46 |
|
| 47 |
pinctrl-names = "default"; |
| 48 |
pinctrl-0 = <&tkey_led_en_default>; |
| 49 |
}; |
| 50 |
}; |
| 51 |
|
| 52 |
&accelerometer { |
| 53 |
mount-matrix = "0", "1", "0", |
| 54 |
"1", "0", "0", |
| 55 |
"0", "0", "1"; |
| 56 |
}; |
| 57 |
|
| 58 |
&battery { |
| 59 |
charge-term-current-microamp = <150000>; |
| 60 |
constant-charge-current-max-microamp = <1000000>; |
| 61 |
constant-charge-voltage-max-microvolt = <4350000>; |
| 62 |
}; |
| 63 |
|
| 64 |
&blsp_i2c5 { |
| 65 |
status = "okay"; |
| 66 |
|
| 67 |
touchscreen@20 { |
| 68 |
compatible = "zinitix,bt541"; |
| 69 |
|
| 70 |
reg = <0x20>; |
| 71 |
interrupt-parent = <&tlmm>; |
| 72 |
interrupts = <13 IRQ_TYPE_EDGE_FALLING>; |
| 73 |
|
| 74 |
touchscreen-size-x = <540>; |
| 75 |
touchscreen-size-y = <960>; |
| 76 |
|
| 77 |
vcca-supply = <®_vdd_tsp_a>; |
| 78 |
vdd-supply = <&pm8916_l6>; |
| 79 |
|
| 80 |
pinctrl-names = "default"; |
| 81 |
pinctrl-0 = <&ts_int_default>; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
&clk_pwm { |
| 86 |
status = "okay"; |
| 87 |
}; |
| 88 |
|
| 89 |
&mdss_dsi0 { |
| 90 |
panel@0 { |
| 91 |
reg = <0>; |
| 92 |
|
| 93 |
compatible = "samsung,s6e88a0-ams452ef01"; |
| 94 |
|
| 95 |
vdd3-supply = <®_panel_vdd3>; |
| 96 |
vci-supply = <&pm8916_l17>; |
| 97 |
reset-gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; |
| 98 |
|
| 99 |
port { |
| 100 |
panel_in: endpoint { |
| 101 |
remote-endpoint = <&mdss_dsi0_out>; |
| 102 |
}; |
| 103 |
}; |
| 104 |
}; |
| 105 |
}; |
| 106 |
|
| 107 |
&mdss_dsi0_out { |
| 108 |
data-lanes = <0 1>; |
| 109 |
remote-endpoint = <&panel_in>; |
| 110 |
}; |
| 111 |
|
| 112 |
&touchkey { |
| 113 |
vcc-supply = <®_touch_key>; |
| 114 |
vdd-supply = <®_key_led>; |
| 115 |
}; |
| 116 |
|
| 117 |
&vibrator { |
| 118 |
status = "okay"; |
| 119 |
}; |
| 120 |
|
| 121 |
&wcnss { |
| 122 |
status = "okay"; |
| 123 |
}; |
| 124 |
|
| 125 |
&wcnss_iris { |
| 126 |
compatible = "qcom,wcn3620"; |
| 127 |
}; |
| 128 |
|
| 129 |
&wcnss_mem { |
| 130 |
status = "okay"; |
| 131 |
}; |
| 132 |
|
| 133 |
&tlmm { |
| 134 |
panel_vdd3_default: panel-vdd3-default-state { |
| 135 |
pins = "gpio9"; |
| 136 |
function = "gpio"; |
| 137 |
|
| 138 |
drive-strength = <2>; |
| 139 |
bias-disable; |
| 140 |
}; |
| 141 |
|
| 142 |
tkey_en_default: tkey-en-default-state { |
| 143 |
pins = "gpio86"; |
| 144 |
function = "gpio"; |
| 145 |
|
| 146 |
drive-strength = <2>; |
| 147 |
bias-disable; |
| 148 |
}; |
| 149 |
|
| 150 |
tkey_led_en_default: tkey-led-en-default-state { |
| 151 |
pins = "gpio60"; |
| 152 |
function = "gpio"; |
| 153 |
|
| 154 |
drive-strength = <2>; |
| 155 |
bias-disable; |
| 156 |
}; |
| 157 |
}; |