Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/msm8916-lg-m216.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-only
2
3 /dts-v1/;
4
5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi"
7
8 #include <dt-bindings/gpio/gpio.h>
9
10 / {
11 model = "LG K10 (K420n)";
12 compatible = "lg,m216", "qcom,msm8916";
13 chassis-type = "handset";
14
15 aliases {
16 mmc0 = &sdhc_1; /* eMMC */
17 mmc1 = &sdhc_2; /* SD card */
18 serial0 = &blsp_uart2;
19 };
20
21 chosen {
22 stdout-path = "serial0";
23 };
24
25 battery: battery {
26 compatible = "simple-battery";
27 voltage-min-design-microvolt = <3300000>;
28 voltage-max-design-microvolt = <4350000>;
29 energy-full-design-microwatt-hours = <8800000>;
30 charge-full-design-microamp-hours = <2300000>;
31
32 ocv-capacity-celsius = <25>;
33 ocv-capacity-table-0 = <4342000 100>, <4266000 95>, <4206000 90>,
34 <4148000 85>, <4094000 80>, <4046000 75>, <3994000 70>,
35 <3956000 65>, <3916000 60>, <3866000 55>, <3831000 50>,
36 <3808000 45>, <3789000 40>, <3776000 35>, <3769000 30>,
37 <3760000 25>, <3740000 20>, <3712000 16>, <3684000 13>,
38 <3676000 11>, <3674000 10>, <3672000 9>, <3669000 8>,
39 <3665000 7>, <3660000 6>, <3643000 5>, <3602000 4>,
40 <3542000 3>, <3458000 2>, <3326000 1>, <3000000 0>;
41 };
42
43 gpio-keys {
44 compatible = "gpio-keys";
45
46 pinctrl-0 = <&gpio_keys_default>;
47 pinctrl-names = "default";
48
49 label = "GPIO Buttons";
50
51 volume-up-button {
52 label = "Volume Up";
53 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
54 linux,code = <KEY_VOLUMEUP>;
55 };
56
57 volume-down-button {
58 label = "Volume Down";
59 gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
60 linux,code = <KEY_VOLUMEDOWN>;
61 };
62 };
63 };
64
65 &blsp_i2c2 {
66 status = "okay";
67
68 accelerometer@11 {
69 compatible = "bosch,bmc150_accel";
70 reg = <0x11>;
71
72 interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>;
73
74 mount-matrix = "0", "1", "0",
75 "-1", "0", "0",
76 "0", "0", "1";
77
78 vdd-supply = <&pm8916_l17>;
79 vddio-supply = <&pm8916_l6>;
80
81 pinctrl-0 = <&accel_int_default>;
82 pinctrl-names = "default";
83 };
84
85 magnetometer@13 {
86 compatible = "bosch,bmc150_magn";
87 reg = <0x13>;
88
89 interrupts-extended = <&tlmm 69 IRQ_TYPE_EDGE_RISING>;
90
91 vdd-supply = <&pm8916_l17>;
92 vddio-supply = <&pm8916_l6>;
93
94 pinctrl-0 = <&magn_int_default>;
95 pinctrl-names = "default";
96 };
97 };
98
99 &blsp_i2c5 {
100 status = "okay";
101
102 touchscreen@34 {
103 compatible = "melfas,mip4_ts";
104 reg = <0x34>;
105
106 interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
107 ce-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
108
109 pinctrl-0 = <&touchscreen_default>;
110 pinctrl-names = "default";
111 };
112 };
113
114 &blsp_uart2 {
115 pinctrl-0 = <&blsp_uart2_console_default>;
116 pinctrl-1 = <&blsp_uart2_console_sleep>;
117 pinctrl-names = "default", "sleep";
118 status = "okay";
119 };
120
121 &mpss_mem {
122 reg = <0x0 0x86800000 0x0 0x4a00000>;
123 };
124
125 &pm8916_bms {
126 monitored-battery = <&battery>;
127 power-supplies = <&pm8916_charger>;
128
129 status = "okay";
130 };
131
132 &pm8916_charger {
133 qcom,fast-charge-safe-current = <700000>;
134 qcom,fast-charge-safe-voltage = <4300000>;
135
136 monitored-battery = <&battery>;
137 status = "okay";
138 };
139
140 &pm8916_codec {
141 qcom,micbias1-ext-cap;
142 qcom,micbias-lvl = <2800>;
143 qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
144 qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
145 qcom,hphl-jack-type-normally-open;
146 };
147
148 &pm8916_rpm_regulators {
149 pm8916_l17: l17 {
150 regulator-min-microvolt = <2850000>;
151 regulator-max-microvolt = <2850000>;
152 };
153 };
154
155 &pm8916_vib {
156 status = "okay";
157 };
158
159 &sdhc_1 {
160 status = "okay";
161 };
162
163 &sdhc_2 {
164 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
165 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
166 pinctrl-names = "default", "sleep";
167
168 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
169
170 status = "okay";
171 };
172
173 &sound {
174 audio-routing =
175 "AMIC1", "MIC BIAS External1",
176 "AMIC2", "MIC BIAS Internal2",
177 "AMIC3", "MIC BIAS External1";
178 };
179
180 &usb {
181 dr_mode = "peripheral";
182 extcon = <&pm8916_charger>;
183 status = "okay";
184 };
185
186 &usb_hs_phy {
187 extcon = <&pm8916_charger>;
188 };
189
190 &venus {
191 status = "okay";
192 };
193
194 &venus_mem {
195 status = "okay";
196 };
197
198 &wcnss {
199 status = "okay";
200 };
201
202 &wcnss_iris {
203 compatible = "qcom,wcn3620";
204 };
205
206 &wcnss_mem {
207 status = "okay";
208 };
209
210 &tlmm {
211 accel_int_default: accel-int-default-state {
212 pins = "gpio115";
213 function = "gpio";
214 drive-strength = <2>;
215 bias-disable;
216 };
217
218 gpio_keys_default: gpio-keys-default-state {
219 pins = "gpio107", "gpio108";
220 function = "gpio";
221 drive-strength = <2>;
222 bias-pull-up;
223 };
224
225 magn_int_default: magn-int-default-state {
226 pins = "gpio69";
227 function = "gpio";
228 drive-strength = <2>;
229 bias-disable;
230 };
231
232 sdc2_cd_default: sdc2-cd-default-state {
233 pins = "gpio38";
234 function = "gpio";
235 drive-strength = <2>;
236 bias-disable;
237 };
238
239 touchscreen_default: touchscreen-default-state {
240 touchscreen-pins {
241 pins = "gpio13";
242 function = "gpio";
243 drive-strength = <2>;
244 bias-pull-up;
245 };
246
247 ce-pins {
248 pins = "gpio12";
249 function = "gpio";
250 drive-strength = <2>;
251 bias-disable;
252 };
253 };
254 };