| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include "msm8916-pm8916.dtsi" |
| 6 |
#include "msm8916-modem-qdsp6.dtsi" |
| 7 |
|
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include <dt-bindings/leds/common.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "GPLUS FL8005A"; |
| 14 |
compatible = "gplus,fl8005a", "qcom,msm8916"; |
| 15 |
chassis-type = "tablet"; |
| 16 |
|
| 17 |
aliases { |
| 18 |
mmc0 = &sdhc_1; /* eMMC */ |
| 19 |
mmc1 = &sdhc_2; /* SD card */ |
| 20 |
serial0 = &blsp_uart2; |
| 21 |
}; |
| 22 |
|
| 23 |
chosen { |
| 24 |
stdout-path = "serial0"; |
| 25 |
}; |
| 26 |
|
| 27 |
battery: battery { |
| 28 |
compatible = "simple-battery"; |
| 29 |
device-chemistry = "lithium-ion-polymer"; |
| 30 |
voltage-min-design-microvolt = <3700000>; |
| 31 |
voltage-max-design-microvolt = <4200000>; |
| 32 |
energy-full-design-microwatt-hours = <13690000>; |
| 33 |
charge-full-design-microamp-hours = <3700000>; |
| 34 |
|
| 35 |
ocv-capacity-celsius = <25>; |
| 36 |
ocv-capacity-table-0 = |
| 37 |
<4186000 100>, <4126000 95>, <4078000 90>, |
| 38 |
<4036000 85>, <3997000 80>, <3962000 75>, |
| 39 |
<3932000 70>, <3904000 65>, <3874000 60>, |
| 40 |
<3839000 55>, <3809000 50>, <3792000 45>, |
| 41 |
<3780000 40>, <3772000 35>, <3764000 30>, |
| 42 |
<3752000 25>, <3731000 20>, <3704000 16>, |
| 43 |
<3677000 13>, <3670000 11>, <3668000 10>, |
| 44 |
<3666000 9>, <3662000 8>, <3658000 7>, <3648000 6>, |
| 45 |
<3624000 5>, <3580000 4>, <3518000 3>, <3434000 2>, |
| 46 |
<3310000 1>, <3000000 0>; |
| 47 |
}; |
| 48 |
|
| 49 |
flash-led-controller { |
| 50 |
/* Actually qcom,leds-gpio-flash */ |
| 51 |
compatible = "sgmicro,sgm3140"; |
| 52 |
enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; |
| 53 |
flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; |
| 54 |
|
| 55 |
pinctrl-0 = <&camera_flash_default>; |
| 56 |
pinctrl-names = "default"; |
| 57 |
|
| 58 |
flash_led: led { |
| 59 |
function = LED_FUNCTION_FLASH; |
| 60 |
color = <LED_COLOR_ID_WHITE>; |
| 61 |
flash-max-timeout-us = <250000>; |
| 62 |
}; |
| 63 |
}; |
| 64 |
|
| 65 |
gpio-keys { |
| 66 |
compatible = "gpio-keys"; |
| 67 |
|
| 68 |
pinctrl-0 = <&gpio_keys_default>; |
| 69 |
pinctrl-names = "default"; |
| 70 |
|
| 71 |
button-volume-up { |
| 72 |
label = "Volume Up"; |
| 73 |
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; |
| 74 |
linux,code = <KEY_VOLUMEUP>; |
| 75 |
}; |
| 76 |
}; |
| 77 |
|
| 78 |
gpio-leds { |
| 79 |
compatible = "gpio-leds"; |
| 80 |
|
| 81 |
pinctrl-0 = <&gpio_leds_default>; |
| 82 |
pinctrl-names = "default"; |
| 83 |
|
| 84 |
led-red { |
| 85 |
function = LED_FUNCTION_CHARGING; |
| 86 |
color = <LED_COLOR_ID_RED>; |
| 87 |
gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; |
| 88 |
retain-state-suspended; |
| 89 |
}; |
| 90 |
|
| 91 |
led-green { |
| 92 |
function = LED_FUNCTION_CHARGING; |
| 93 |
color = <LED_COLOR_ID_GREEN>; |
| 94 |
gpios = <&tlmm 118 GPIO_ACTIVE_HIGH>; |
| 95 |
retain-state-suspended; |
| 96 |
}; |
| 97 |
}; |
| 98 |
|
| 99 |
usb_id: usb-id { |
| 100 |
compatible = "linux,extcon-usb-gpio"; |
| 101 |
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; |
| 102 |
pinctrl-0 = <&usb_id_default>; |
| 103 |
pinctrl-names = "default"; |
| 104 |
}; |
| 105 |
}; |
| 106 |
|
| 107 |
&blsp_i2c5 { |
| 108 |
status = "okay"; |
| 109 |
|
| 110 |
touchscreen@38 { |
| 111 |
/* Actually ft5402 */ |
| 112 |
compatible = "edt,edt-ft5406"; |
| 113 |
reg = <0x38>; |
| 114 |
|
| 115 |
interrupt-parent = <&tlmm>; |
| 116 |
interrupts = <13 IRQ_TYPE_EDGE_FALLING>; |
| 117 |
|
| 118 |
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; |
| 119 |
|
| 120 |
vcc-supply = <&pm8916_l17>; |
| 121 |
iovcc-supply = <&pm8916_l6>; |
| 122 |
|
| 123 |
touchscreen-size-x = <800>; |
| 124 |
touchscreen-size-y = <500>; |
| 125 |
touchscreen-inverted-x; |
| 126 |
touchscreen-swapped-x-y; |
| 127 |
|
| 128 |
pinctrl-0 = <&touchscreen_default>; |
| 129 |
pinctrl-names = "default"; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
&blsp_uart2 { |
| 134 |
pinctrl-0 = <&blsp_uart2_console_default>; |
| 135 |
pinctrl-1 = <&blsp_uart2_console_sleep>; |
| 136 |
pinctrl-names = "default", "sleep"; |
| 137 |
status = "okay"; |
| 138 |
}; |
| 139 |
|
| 140 |
&mpss_mem { |
| 141 |
reg = <0x0 0x86800000 0x0 0x5000000>; |
| 142 |
}; |
| 143 |
|
| 144 |
&pm8916_bms { |
| 145 |
monitored-battery = <&battery>; |
| 146 |
status = "okay"; |
| 147 |
}; |
| 148 |
|
| 149 |
&pm8916_codec { |
| 150 |
qcom,micbias-lvl = <2800>; |
| 151 |
qcom,mbhc-vthreshold-low = <150 180 237 450 500>; |
| 152 |
qcom,mbhc-vthreshold-high = <150 180 237 450 500>; |
| 153 |
qcom,hphl-jack-type-normally-open; |
| 154 |
}; |
| 155 |
|
| 156 |
&pm8916_resin { |
| 157 |
linux,code = <KEY_VOLUMEDOWN>; |
| 158 |
status = "okay"; |
| 159 |
}; |
| 160 |
|
| 161 |
&pm8916_rpm_regulators { |
| 162 |
pm8916_l17: l17 { |
| 163 |
regulator-min-microvolt = <2850000>; |
| 164 |
regulator-max-microvolt = <2850000>; |
| 165 |
}; |
| 166 |
}; |
| 167 |
|
| 168 |
&pm8916_vib { |
| 169 |
status = "okay"; |
| 170 |
}; |
| 171 |
|
| 172 |
&sdhc_1 { |
| 173 |
status = "okay"; |
| 174 |
}; |
| 175 |
|
| 176 |
&sdhc_2 { |
| 177 |
pinctrl-0 = <&sdc2_default &sdc2_cd_default>; |
| 178 |
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; |
| 179 |
pinctrl-names = "default", "sleep"; |
| 180 |
|
| 181 |
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; |
| 182 |
|
| 183 |
status = "okay"; |
| 184 |
}; |
| 185 |
|
| 186 |
&sound { |
| 187 |
model = "msm8916-1mic"; |
| 188 |
audio-routing = |
| 189 |
"AMIC1", "MIC BIAS External1", |
| 190 |
"AMIC2", "MIC BIAS Internal2", |
| 191 |
"AMIC3", "MIC BIAS External1"; |
| 192 |
}; |
| 193 |
|
| 194 |
&usb { |
| 195 |
extcon = <&usb_id>, <&usb_id>; |
| 196 |
status = "okay"; |
| 197 |
}; |
| 198 |
|
| 199 |
&usb_hs_phy { |
| 200 |
extcon = <&usb_id>; |
| 201 |
}; |
| 202 |
|
| 203 |
&venus { |
| 204 |
status = "okay"; |
| 205 |
}; |
| 206 |
|
| 207 |
&venus_mem { |
| 208 |
status = "okay"; |
| 209 |
}; |
| 210 |
|
| 211 |
&wcnss { |
| 212 |
status = "okay"; |
| 213 |
}; |
| 214 |
|
| 215 |
&wcnss_iris { |
| 216 |
compatible = "qcom,wcn3620"; |
| 217 |
}; |
| 218 |
|
| 219 |
&wcnss_mem { |
| 220 |
status = "okay"; |
| 221 |
}; |
| 222 |
|
| 223 |
&tlmm { |
| 224 |
camera_flash_default: camera-flash-default-state { |
| 225 |
pins = "gpio31", "gpio32"; |
| 226 |
function = "gpio"; |
| 227 |
drive-strength = <2>; |
| 228 |
bias-disable; |
| 229 |
}; |
| 230 |
|
| 231 |
gpio_keys_default: gpio-keys-default-state { |
| 232 |
pins = "gpio107"; |
| 233 |
function = "gpio"; |
| 234 |
drive-strength = <2>; |
| 235 |
bias-pull-up; |
| 236 |
}; |
| 237 |
|
| 238 |
gpio_leds_default: gpio-led-default-state { |
| 239 |
pins = "gpio117", "gpio118"; |
| 240 |
function = "gpio"; |
| 241 |
drive-strength = <2>; |
| 242 |
bias-disable; |
| 243 |
}; |
| 244 |
|
| 245 |
sdc2_cd_default: sdc2-cd-default-state { |
| 246 |
pins = "gpio38"; |
| 247 |
function = "gpio"; |
| 248 |
drive-strength = <2>; |
| 249 |
bias-disable; |
| 250 |
}; |
| 251 |
|
| 252 |
touchscreen_default: touchscreen-default-state { |
| 253 |
reset-pins { |
| 254 |
pins = "gpio12"; |
| 255 |
function = "gpio"; |
| 256 |
drive-strength = <2>; |
| 257 |
bias-disable; |
| 258 |
}; |
| 259 |
|
| 260 |
touchscreen-pins { |
| 261 |
pins = "gpio13"; |
| 262 |
function = "gpio"; |
| 263 |
drive-strength = <2>; |
| 264 |
bias-pull-up; |
| 265 |
}; |
| 266 |
}; |
| 267 |
|
| 268 |
usb_id_default: usb-id-default-state { |
| 269 |
pins = "gpio110"; |
| 270 |
function = "gpio"; |
| 271 |
drive-strength = <8>; |
| 272 |
bias-pull-up; |
| 273 |
}; |
| 274 |
}; |