| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include "msm8916-pm8916.dtsi" |
| 6 |
#include "msm8916-modem-qdsp6.dtsi" |
| 7 |
|
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "Asus Zenfone 2 Laser"; |
| 14 |
compatible = "asus,z00l", "qcom,msm8916"; |
| 15 |
chassis-type = "handset"; |
| 16 |
|
| 17 |
aliases { |
| 18 |
mmc0 = &sdhc_1; /* eMMC */ |
| 19 |
mmc1 = &sdhc_2; /* SD card */ |
| 20 |
serial0 = &blsp_uart2; |
| 21 |
}; |
| 22 |
|
| 23 |
chosen { |
| 24 |
stdout-path = "serial0"; |
| 25 |
}; |
| 26 |
|
| 27 |
gpio-keys { |
| 28 |
compatible = "gpio-keys"; |
| 29 |
|
| 30 |
pinctrl-names = "default"; |
| 31 |
pinctrl-0 = <&gpio_keys_default>; |
| 32 |
|
| 33 |
label = "GPIO Buttons"; |
| 34 |
|
| 35 |
button-volume-up { |
| 36 |
label = "Volume Up"; |
| 37 |
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; |
| 38 |
linux,code = <KEY_VOLUMEUP>; |
| 39 |
debounce-interval = <15>; |
| 40 |
}; |
| 41 |
|
| 42 |
button-volume-down { |
| 43 |
label = "Volume Down"; |
| 44 |
gpios = <&tlmm 117 GPIO_ACTIVE_LOW>; |
| 45 |
linux,code = <KEY_VOLUMEDOWN>; |
| 46 |
debounce-interval = <15>; |
| 47 |
}; |
| 48 |
}; |
| 49 |
|
| 50 |
reg_sd_vmmc: regulator-sdcard-vmmc { |
| 51 |
compatible = "regulator-fixed"; |
| 52 |
regulator-name = "sdcard-vmmc"; |
| 53 |
regulator-min-microvolt = <2950000>; |
| 54 |
regulator-max-microvolt = <2950000>; |
| 55 |
|
| 56 |
gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; |
| 57 |
enable-active-high; |
| 58 |
|
| 59 |
startup-delay-us = <200>; |
| 60 |
|
| 61 |
pinctrl-names = "default"; |
| 62 |
pinctrl-0 = <&sd_vmmc_en_default>; |
| 63 |
}; |
| 64 |
|
| 65 |
usb_id: usb-id { |
| 66 |
compatible = "linux,extcon-usb-gpio"; |
| 67 |
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; |
| 68 |
pinctrl-names = "default"; |
| 69 |
pinctrl-0 = <&usb_id_default>; |
| 70 |
}; |
| 71 |
}; |
| 72 |
|
| 73 |
&blsp_i2c2 { |
| 74 |
status = "okay"; |
| 75 |
|
| 76 |
magnetometer@c { |
| 77 |
compatible = "asahi-kasei,ak09911"; |
| 78 |
reg = <0x0c>; |
| 79 |
|
| 80 |
vdd-supply = <&pm8916_l8>; |
| 81 |
vid-supply = <&pm8916_l6>; |
| 82 |
|
| 83 |
reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>; |
| 84 |
|
| 85 |
pinctrl-names = "default"; |
| 86 |
pinctrl-0 = <&mag_reset_default>; |
| 87 |
}; |
| 88 |
|
| 89 |
imu@68 { |
| 90 |
compatible = "invensense,mpu6515"; |
| 91 |
reg = <0x68>; |
| 92 |
|
| 93 |
interrupt-parent = <&tlmm>; |
| 94 |
interrupts = <36 IRQ_TYPE_EDGE_RISING>; |
| 95 |
|
| 96 |
vdd-supply = <&pm8916_l17>; |
| 97 |
vddio-supply = <&pm8916_l6>; |
| 98 |
|
| 99 |
pinctrl-names = "default"; |
| 100 |
pinctrl-0 = <&imu_default>; |
| 101 |
|
| 102 |
mount-matrix = "1", "0", "0", |
| 103 |
"0", "-1", "0", |
| 104 |
"0", "0", "1"; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
&blsp_i2c5 { |
| 109 |
status = "okay"; |
| 110 |
|
| 111 |
touchscreen@38 { |
| 112 |
compatible = "edt,edt-ft5306"; |
| 113 |
reg = <0x38>; |
| 114 |
|
| 115 |
interrupt-parent = <&tlmm>; |
| 116 |
interrupts = <13 IRQ_TYPE_EDGE_FALLING>; |
| 117 |
|
| 118 |
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; |
| 119 |
|
| 120 |
vcc-supply = <&pm8916_l11>; |
| 121 |
iovcc-supply = <&pm8916_l6>; |
| 122 |
|
| 123 |
touchscreen-size-x = <720>; |
| 124 |
touchscreen-size-y = <1280>; |
| 125 |
|
| 126 |
pinctrl-names = "default"; |
| 127 |
pinctrl-0 = <&touchscreen_default>; |
| 128 |
}; |
| 129 |
}; |
| 130 |
|
| 131 |
&blsp_uart2 { |
| 132 |
status = "okay"; |
| 133 |
pinctrl-0 = <&blsp_uart2_console_default>; |
| 134 |
pinctrl-1 = <&blsp_uart2_console_sleep>; |
| 135 |
pinctrl-names = "default", "sleep"; |
| 136 |
}; |
| 137 |
|
| 138 |
&mpss_mem { |
| 139 |
reg = <0x0 0x86800000 0x0 0x5500000>; |
| 140 |
}; |
| 141 |
|
| 142 |
&pm8916_codec { |
| 143 |
qcom,micbias-lvl = <2800>; |
| 144 |
qcom,mbhc-vthreshold-low = <75 150 237 450 500>; |
| 145 |
qcom,mbhc-vthreshold-high = <75 150 237 450 500>; |
| 146 |
qcom,micbias1-ext-cap; |
| 147 |
qcom,hphl-jack-type-normally-open; |
| 148 |
}; |
| 149 |
|
| 150 |
&pm8916_rpm_regulators { |
| 151 |
pm8916_l17: l17 { |
| 152 |
regulator-min-microvolt = <2850000>; |
| 153 |
regulator-max-microvolt = <2850000>; |
| 154 |
}; |
| 155 |
}; |
| 156 |
|
| 157 |
&sdhc_1 { |
| 158 |
status = "okay"; |
| 159 |
}; |
| 160 |
|
| 161 |
&sdhc_2 { |
| 162 |
status = "okay"; |
| 163 |
vmmc-supply = <®_sd_vmmc>; |
| 164 |
|
| 165 |
pinctrl-names = "default", "sleep"; |
| 166 |
pinctrl-0 = <&sdc2_default &sdc2_cd_default>; |
| 167 |
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; |
| 168 |
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; |
| 169 |
}; |
| 170 |
|
| 171 |
&sound { |
| 172 |
audio-routing = |
| 173 |
"AMIC1", "MIC BIAS External1", |
| 174 |
"AMIC2", "MIC BIAS Internal2", |
| 175 |
"AMIC3", "MIC BIAS External1"; |
| 176 |
}; |
| 177 |
|
| 178 |
&usb { |
| 179 |
status = "okay"; |
| 180 |
extcon = <&usb_id>, <&usb_id>; |
| 181 |
}; |
| 182 |
|
| 183 |
&usb_hs_phy { |
| 184 |
extcon = <&usb_id>; |
| 185 |
}; |
| 186 |
|
| 187 |
&venus { |
| 188 |
status = "okay"; |
| 189 |
}; |
| 190 |
|
| 191 |
&venus_mem { |
| 192 |
status = "okay"; |
| 193 |
}; |
| 194 |
|
| 195 |
&wcnss { |
| 196 |
status = "okay"; |
| 197 |
}; |
| 198 |
|
| 199 |
&wcnss_iris { |
| 200 |
compatible = "qcom,wcn3620"; |
| 201 |
}; |
| 202 |
|
| 203 |
&wcnss_mem { |
| 204 |
status = "okay"; |
| 205 |
}; |
| 206 |
|
| 207 |
&tlmm { |
| 208 |
gpio_keys_default: gpio-keys-default-state { |
| 209 |
pins = "gpio107", "gpio117"; |
| 210 |
function = "gpio"; |
| 211 |
|
| 212 |
drive-strength = <2>; |
| 213 |
bias-pull-up; |
| 214 |
}; |
| 215 |
|
| 216 |
imu_default: imu-default-state { |
| 217 |
pins = "gpio36"; |
| 218 |
function = "gpio"; |
| 219 |
|
| 220 |
drive-strength = <2>; |
| 221 |
bias-disable; |
| 222 |
}; |
| 223 |
|
| 224 |
mag_reset_default: mag-reset-default-state { |
| 225 |
pins = "gpio112"; |
| 226 |
function = "gpio"; |
| 227 |
|
| 228 |
drive-strength = <2>; |
| 229 |
bias-disable; |
| 230 |
}; |
| 231 |
|
| 232 |
sd_vmmc_en_default: sd-vmmc-en-default-state { |
| 233 |
pins = "gpio87"; |
| 234 |
function = "gpio"; |
| 235 |
|
| 236 |
drive-strength = <2>; |
| 237 |
bias-disable; |
| 238 |
}; |
| 239 |
|
| 240 |
sdc2_cd_default: sdc2-cd-default-state { |
| 241 |
pins = "gpio38"; |
| 242 |
function = "gpio"; |
| 243 |
drive-strength = <2>; |
| 244 |
bias-disable; |
| 245 |
}; |
| 246 |
|
| 247 |
touchscreen_default: touchscreen-default-state { |
| 248 |
touch-pins { |
| 249 |
pins = "gpio13"; |
| 250 |
function = "gpio"; |
| 251 |
|
| 252 |
drive-strength = <2>; |
| 253 |
bias-pull-up; |
| 254 |
}; |
| 255 |
|
| 256 |
reset-pins { |
| 257 |
pins = "gpio12"; |
| 258 |
function = "gpio"; |
| 259 |
|
| 260 |
drive-strength = <2>; |
| 261 |
bias-disable; |
| 262 |
}; |
| 263 |
}; |
| 264 |
|
| 265 |
usb_id_default: usb-id-default-state { |
| 266 |
pins = "gpio110"; |
| 267 |
function = "gpio"; |
| 268 |
|
| 269 |
drive-strength = <8>; |
| 270 |
bias-pull-up; |
| 271 |
}; |
| 272 |
}; |