| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include "msm8916-pm8916.dtsi" |
| 6 |
#include "msm8916-modem-qdsp6.dtsi" |
| 7 |
|
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 11 |
#include <dt-bindings/leds/common.h> |
| 12 |
|
| 13 |
/* |
| 14 |
* NOTE: The original firmware from Acer can only boot 32-bit kernels. |
| 15 |
* To boot this device tree using arm64 it is necessary to flash 64-bit |
| 16 |
* TZ/HYP firmware (e.g. taken from the DragonBoard 410c). |
| 17 |
* See https://wiki.postmarketos.org/wiki/Acer_Iconia_Talk_S_(acer-a1-724) |
| 18 |
* for suggested installation instructions. |
| 19 |
*/ |
| 20 |
|
| 21 |
/ { |
| 22 |
model = "Acer Iconia Talk S A1-724"; |
| 23 |
compatible = "acer,a1-724", "qcom,msm8916"; |
| 24 |
chassis-type = "tablet"; |
| 25 |
|
| 26 |
aliases { |
| 27 |
mmc0 = &sdhc_1; /* eMMC */ |
| 28 |
mmc1 = &sdhc_2; /* SD card */ |
| 29 |
serial0 = &blsp_uart2; |
| 30 |
}; |
| 31 |
|
| 32 |
chosen { |
| 33 |
stdout-path = "serial0"; |
| 34 |
}; |
| 35 |
|
| 36 |
gpio-keys { |
| 37 |
compatible = "gpio-keys"; |
| 38 |
|
| 39 |
pinctrl-names = "default"; |
| 40 |
pinctrl-0 = <&gpio_keys_default>; |
| 41 |
|
| 42 |
label = "GPIO Buttons"; |
| 43 |
|
| 44 |
button-volume-up { |
| 45 |
label = "Volume Up"; |
| 46 |
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; |
| 47 |
linux,code = <KEY_VOLUMEUP>; |
| 48 |
}; |
| 49 |
}; |
| 50 |
|
| 51 |
usb_id: usb-id { |
| 52 |
compatible = "linux,extcon-usb-gpio"; |
| 53 |
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; |
| 54 |
pinctrl-names = "default"; |
| 55 |
pinctrl-0 = <&usb_id_default>; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
&blsp_i2c2 { |
| 60 |
status = "okay"; |
| 61 |
|
| 62 |
accelerometer@10 { |
| 63 |
compatible = "bosch,bmc150_accel"; |
| 64 |
reg = <0x10>; |
| 65 |
interrupt-parent = <&tlmm>; |
| 66 |
interrupts = <115 IRQ_TYPE_EDGE_RISING>; |
| 67 |
|
| 68 |
vdd-supply = <&pm8916_l17>; |
| 69 |
vddio-supply = <&pm8916_l6>; |
| 70 |
|
| 71 |
pinctrl-names = "default"; |
| 72 |
pinctrl-0 = <&accel_int_default>; |
| 73 |
|
| 74 |
mount-matrix = "0", "-1", "0", |
| 75 |
"-1", "0", "0", |
| 76 |
"0", "0", "1"; |
| 77 |
}; |
| 78 |
|
| 79 |
magnetometer@12 { |
| 80 |
compatible = "bosch,bmc150_magn"; |
| 81 |
reg = <0x12>; |
| 82 |
|
| 83 |
vdd-supply = <&pm8916_l17>; |
| 84 |
vddio-supply = <&pm8916_l6>; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
&blsp_i2c4 { |
| 89 |
status = "okay"; |
| 90 |
|
| 91 |
led-controller@30 { |
| 92 |
compatible = "kinetic,ktd2026"; |
| 93 |
reg = <0x30>; |
| 94 |
#address-cells = <1>; |
| 95 |
#size-cells = <0>; |
| 96 |
|
| 97 |
led@0 { |
| 98 |
reg = <0>; |
| 99 |
function = LED_FUNCTION_STATUS; |
| 100 |
color = <LED_COLOR_ID_RED>; |
| 101 |
}; |
| 102 |
|
| 103 |
led@1 { |
| 104 |
reg = <1>; |
| 105 |
function = LED_FUNCTION_STATUS; |
| 106 |
color = <LED_COLOR_ID_GREEN>; |
| 107 |
}; |
| 108 |
}; |
| 109 |
}; |
| 110 |
|
| 111 |
&blsp_i2c5 { |
| 112 |
status = "okay"; |
| 113 |
|
| 114 |
touchscreen@38 { |
| 115 |
/* Actually ft5446 */ |
| 116 |
compatible = "edt,edt-ft5406"; |
| 117 |
reg = <0x38>; |
| 118 |
|
| 119 |
interrupt-parent = <&tlmm>; |
| 120 |
interrupts = <13 IRQ_TYPE_LEVEL_LOW>; |
| 121 |
|
| 122 |
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; |
| 123 |
|
| 124 |
vcc-supply = <&pm8916_l16>; |
| 125 |
iovcc-supply = <&pm8916_l6>; |
| 126 |
|
| 127 |
touchscreen-size-x = <720>; |
| 128 |
touchscreen-size-y = <1280>; |
| 129 |
|
| 130 |
pinctrl-names = "default"; |
| 131 |
pinctrl-0 = <&touchscreen_default>; |
| 132 |
}; |
| 133 |
}; |
| 134 |
|
| 135 |
&blsp_uart2 { |
| 136 |
pinctrl-0 = <&blsp_uart2_console_default>; |
| 137 |
pinctrl-1 = <&blsp_uart2_console_sleep>; |
| 138 |
pinctrl-names = "default", "sleep"; |
| 139 |
status = "okay"; |
| 140 |
}; |
| 141 |
|
| 142 |
&mpss_mem { |
| 143 |
reg = <0x0 0x86800000 0x0 0x4500000>; |
| 144 |
}; |
| 145 |
|
| 146 |
&pm8916_codec { |
| 147 |
qcom,micbias-lvl = <2800>; |
| 148 |
qcom,mbhc-vthreshold-low = <150 237 450 500 590>; |
| 149 |
qcom,mbhc-vthreshold-high = <150 237 450 500 590>; |
| 150 |
qcom,hphl-jack-type-normally-open; |
| 151 |
}; |
| 152 |
|
| 153 |
&pm8916_resin { |
| 154 |
linux,code = <KEY_VOLUMEDOWN>; |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
&pm8916_rpm_regulators { |
| 159 |
pm8916_l16: l16 { |
| 160 |
regulator-min-microvolt = <2900000>; |
| 161 |
regulator-max-microvolt = <2900000>; |
| 162 |
}; |
| 163 |
|
| 164 |
pm8916_l17: l17 { |
| 165 |
regulator-min-microvolt = <2850000>; |
| 166 |
regulator-max-microvolt = <2850000>; |
| 167 |
}; |
| 168 |
}; |
| 169 |
|
| 170 |
&pm8916_vib { |
| 171 |
status = "okay"; |
| 172 |
}; |
| 173 |
|
| 174 |
&sdhc_1 { |
| 175 |
status = "okay"; |
| 176 |
}; |
| 177 |
|
| 178 |
&sdhc_2 { |
| 179 |
pinctrl-names = "default", "sleep"; |
| 180 |
pinctrl-0 = <&sdc2_default &sdc2_cd_default>; |
| 181 |
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; |
| 182 |
|
| 183 |
cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; |
| 184 |
|
| 185 |
status = "okay"; |
| 186 |
}; |
| 187 |
|
| 188 |
&sound { |
| 189 |
model = "acer-a1-724"; |
| 190 |
audio-routing = |
| 191 |
"DMIC1", "MIC BIAS External1", |
| 192 |
"DMIC1", "Digital Mic1", |
| 193 |
"AMIC2", "MIC BIAS Internal2", |
| 194 |
"DMIC2", "MIC BIAS External1", |
| 195 |
"DMIC2", "Digital Mic2"; |
| 196 |
|
| 197 |
pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &pri_mi2s_mclk_default &cdc_dmic_default>; |
| 198 |
pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &pri_mi2s_mclk_sleep &cdc_dmic_sleep>; |
| 199 |
pinctrl-names = "default", "sleep"; |
| 200 |
}; |
| 201 |
|
| 202 |
&usb { |
| 203 |
extcon = <&usb_id>, <&usb_id>; |
| 204 |
status = "okay"; |
| 205 |
}; |
| 206 |
|
| 207 |
&usb_hs_phy { |
| 208 |
extcon = <&usb_id>; |
| 209 |
}; |
| 210 |
|
| 211 |
&venus { |
| 212 |
status = "okay"; |
| 213 |
}; |
| 214 |
|
| 215 |
&venus_mem { |
| 216 |
status = "okay"; |
| 217 |
}; |
| 218 |
|
| 219 |
&wcnss { |
| 220 |
status = "okay"; |
| 221 |
}; |
| 222 |
|
| 223 |
&wcnss_iris { |
| 224 |
compatible = "qcom,wcn3620"; |
| 225 |
}; |
| 226 |
|
| 227 |
&wcnss_mem { |
| 228 |
status = "okay"; |
| 229 |
}; |
| 230 |
|
| 231 |
&tlmm { |
| 232 |
accel_int_default: accel-int-default-state { |
| 233 |
pins = "gpio115"; |
| 234 |
function = "gpio"; |
| 235 |
|
| 236 |
drive-strength = <2>; |
| 237 |
bias-disable; |
| 238 |
}; |
| 239 |
|
| 240 |
gpio_keys_default: gpio-keys-default-state { |
| 241 |
pins = "gpio107"; |
| 242 |
function = "gpio"; |
| 243 |
|
| 244 |
drive-strength = <2>; |
| 245 |
bias-pull-up; |
| 246 |
}; |
| 247 |
|
| 248 |
sdc2_cd_default: sdc2-cd-default-state { |
| 249 |
pins = "gpio38"; |
| 250 |
function = "gpio"; |
| 251 |
drive-strength = <2>; |
| 252 |
bias-disable; |
| 253 |
}; |
| 254 |
|
| 255 |
touchscreen_default: touchscreen-default-state { |
| 256 |
reset-pins { |
| 257 |
pins = "gpio12"; |
| 258 |
function = "gpio"; |
| 259 |
drive-strength = <2>; |
| 260 |
bias-disable; |
| 261 |
}; |
| 262 |
|
| 263 |
touchscreen-pins { |
| 264 |
pins = "gpio13"; |
| 265 |
function = "gpio"; |
| 266 |
drive-strength = <2>; |
| 267 |
bias-pull-up; |
| 268 |
}; |
| 269 |
}; |
| 270 |
|
| 271 |
usb_id_default: usb-id-default-state { |
| 272 |
pins = "gpio110"; |
| 273 |
function = "gpio"; |
| 274 |
|
| 275 |
drive-strength = <8>; |
| 276 |
bias-pull-up; |
| 277 |
}; |
| 278 |
}; |