| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| 2 |
/* |
| 3 |
* IPQ9574 RDP433 board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. |
| 6 |
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
|
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include "ipq9574-rdp-common.dtsi" |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; |
| 16 |
compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; |
| 17 |
}; |
| 18 |
|
| 19 |
&pcie1_phy { |
| 20 |
status = "okay"; |
| 21 |
}; |
| 22 |
|
| 23 |
&pcie1 { |
| 24 |
pinctrl-0 = <&pcie1_default>; |
| 25 |
pinctrl-names = "default"; |
| 26 |
|
| 27 |
perst-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>; |
| 28 |
wake-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>; |
| 29 |
status = "okay"; |
| 30 |
}; |
| 31 |
|
| 32 |
&pcie2_phy { |
| 33 |
status = "okay"; |
| 34 |
}; |
| 35 |
|
| 36 |
&pcie2 { |
| 37 |
pinctrl-0 = <&pcie2_default>; |
| 38 |
pinctrl-names = "default"; |
| 39 |
|
| 40 |
perst-gpios = <&tlmm 29 GPIO_ACTIVE_LOW>; |
| 41 |
wake-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; |
| 42 |
status = "okay"; |
| 43 |
}; |
| 44 |
|
| 45 |
&pcie3_phy { |
| 46 |
status = "okay"; |
| 47 |
}; |
| 48 |
|
| 49 |
&pcie3 { |
| 50 |
pinctrl-0 = <&pcie3_default>; |
| 51 |
pinctrl-names = "default"; |
| 52 |
|
| 53 |
perst-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; |
| 54 |
wake-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; |
| 55 |
status = "okay"; |
| 56 |
}; |
| 57 |
|
| 58 |
&tlmm { |
| 59 |
|
| 60 |
pcie1_default: pcie1-default-state { |
| 61 |
clkreq-n-pins { |
| 62 |
pins = "gpio25"; |
| 63 |
function = "pcie1_clk"; |
| 64 |
drive-strength = <6>; |
| 65 |
bias-pull-up; |
| 66 |
}; |
| 67 |
|
| 68 |
perst-n-pins { |
| 69 |
pins = "gpio26"; |
| 70 |
function = "gpio"; |
| 71 |
drive-strength = <8>; |
| 72 |
bias-pull-down; |
| 73 |
output-low; |
| 74 |
}; |
| 75 |
|
| 76 |
wake-n-pins { |
| 77 |
pins = "gpio27"; |
| 78 |
function = "pcie1_wake"; |
| 79 |
drive-strength = <6>; |
| 80 |
bias-pull-up; |
| 81 |
}; |
| 82 |
}; |
| 83 |
|
| 84 |
pcie2_default: pcie2-default-state { |
| 85 |
clkreq-n-pins { |
| 86 |
pins = "gpio28"; |
| 87 |
function = "pcie2_clk"; |
| 88 |
drive-strength = <6>; |
| 89 |
bias-pull-up; |
| 90 |
}; |
| 91 |
|
| 92 |
perst-n-pins { |
| 93 |
pins = "gpio29"; |
| 94 |
function = "gpio"; |
| 95 |
drive-strength = <8>; |
| 96 |
bias-pull-down; |
| 97 |
output-low; |
| 98 |
}; |
| 99 |
|
| 100 |
wake-n-pins { |
| 101 |
pins = "gpio30"; |
| 102 |
function = "pcie2_wake"; |
| 103 |
drive-strength = <6>; |
| 104 |
bias-pull-up; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
pcie3_default: pcie3-default-state { |
| 109 |
clkreq-n-pins { |
| 110 |
pins = "gpio31"; |
| 111 |
function = "pcie3_clk"; |
| 112 |
drive-strength = <6>; |
| 113 |
bias-pull-up; |
| 114 |
}; |
| 115 |
|
| 116 |
perst-n-pins { |
| 117 |
pins = "gpio32"; |
| 118 |
function = "gpio"; |
| 119 |
drive-strength = <8>; |
| 120 |
bias-pull-up; |
| 121 |
output-low; |
| 122 |
}; |
| 123 |
|
| 124 |
wake-n-pins { |
| 125 |
pins = "gpio33"; |
| 126 |
function = "pcie3_wake"; |
| 127 |
drive-strength = <6>; |
| 128 |
bias-pull-up; |
| 129 |
}; |
| 130 |
}; |
| 131 |
}; |