| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| 2 |
/* |
| 3 |
* IPQ5424 device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. |
| 6 |
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. |
| 7 |
*/ |
| 8 |
|
| 9 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 10 |
#include <dt-bindings/clock/qcom,apss-ipq.h> |
| 11 |
#include <dt-bindings/clock/qcom,ipq5424-cmn-pll.h> |
| 12 |
#include <dt-bindings/clock/qcom,ipq5424-gcc.h> |
| 13 |
#include <dt-bindings/reset/qcom,ipq5424-gcc.h> |
| 14 |
#include <dt-bindings/interconnect/qcom,ipq5424.h> |
| 15 |
#include <dt-bindings/gpio/gpio.h> |
| 16 |
#include <dt-bindings/thermal/thermal.h> |
| 17 |
|
| 18 |
/ { |
| 19 |
#address-cells = <2>; |
| 20 |
#size-cells = <2>; |
| 21 |
interrupt-parent = <&intc>; |
| 22 |
|
| 23 |
clocks { |
| 24 |
ref_48mhz_clk: ref-48mhz-clk { |
| 25 |
compatible = "fixed-factor-clock"; |
| 26 |
clocks = <&xo_clk>; |
| 27 |
#clock-cells = <0>; |
| 28 |
}; |
| 29 |
|
| 30 |
sleep_clk: sleep-clk { |
| 31 |
compatible = "fixed-clock"; |
| 32 |
#clock-cells = <0>; |
| 33 |
}; |
| 34 |
|
| 35 |
xo_board: xo-board-clk { |
| 36 |
compatible = "fixed-factor-clock"; |
| 37 |
clocks = <&ref_48mhz_clk>; |
| 38 |
#clock-cells = <0>; |
| 39 |
}; |
| 40 |
|
| 41 |
xo_clk: xo-clk { |
| 42 |
compatible = "fixed-clock"; |
| 43 |
#clock-cells = <0>; |
| 44 |
}; |
| 45 |
}; |
| 46 |
|
| 47 |
cpus: cpus { |
| 48 |
#address-cells = <1>; |
| 49 |
#size-cells = <0>; |
| 50 |
|
| 51 |
cpu0: cpu@0 { |
| 52 |
device_type = "cpu"; |
| 53 |
compatible = "arm,cortex-a55"; |
| 54 |
reg = <0x0>; |
| 55 |
enable-method = "psci"; |
| 56 |
next-level-cache = <&l2_0>; |
| 57 |
clocks = <&apss_clk APSS_SILVER_CORE_CLK>; |
| 58 |
clock-names = "cpu"; |
| 59 |
operating-points-v2 = <&cpu_opp_table>; |
| 60 |
interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; |
| 61 |
#cooling-cells = <2>; |
| 62 |
|
| 63 |
l2_0: l2-cache { |
| 64 |
compatible = "cache"; |
| 65 |
cache-level = <2>; |
| 66 |
cache-unified; |
| 67 |
next-level-cache = <&l3_0>; |
| 68 |
|
| 69 |
l3_0: l3-cache { |
| 70 |
compatible = "cache"; |
| 71 |
cache-level = <3>; |
| 72 |
cache-unified; |
| 73 |
}; |
| 74 |
}; |
| 75 |
}; |
| 76 |
|
| 77 |
cpu1: cpu@100 { |
| 78 |
device_type = "cpu"; |
| 79 |
compatible = "arm,cortex-a55"; |
| 80 |
enable-method = "psci"; |
| 81 |
reg = <0x100>; |
| 82 |
next-level-cache = <&l2_100>; |
| 83 |
clocks = <&apss_clk APSS_SILVER_CORE_CLK>; |
| 84 |
clock-names = "cpu"; |
| 85 |
operating-points-v2 = <&cpu_opp_table>; |
| 86 |
interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; |
| 87 |
#cooling-cells = <2>; |
| 88 |
|
| 89 |
l2_100: l2-cache { |
| 90 |
compatible = "cache"; |
| 91 |
cache-level = <2>; |
| 92 |
cache-unified; |
| 93 |
next-level-cache = <&l3_0>; |
| 94 |
}; |
| 95 |
}; |
| 96 |
|
| 97 |
cpu2: cpu@200 { |
| 98 |
device_type = "cpu"; |
| 99 |
compatible = "arm,cortex-a55"; |
| 100 |
enable-method = "psci"; |
| 101 |
reg = <0x200>; |
| 102 |
next-level-cache = <&l2_200>; |
| 103 |
clocks = <&apss_clk APSS_SILVER_CORE_CLK>; |
| 104 |
clock-names = "cpu"; |
| 105 |
operating-points-v2 = <&cpu_opp_table>; |
| 106 |
interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; |
| 107 |
#cooling-cells = <2>; |
| 108 |
|
| 109 |
l2_200: l2-cache { |
| 110 |
compatible = "cache"; |
| 111 |
cache-level = <2>; |
| 112 |
cache-unified; |
| 113 |
next-level-cache = <&l3_0>; |
| 114 |
}; |
| 115 |
}; |
| 116 |
|
| 117 |
cpu3: cpu@300 { |
| 118 |
device_type = "cpu"; |
| 119 |
compatible = "arm,cortex-a55"; |
| 120 |
enable-method = "psci"; |
| 121 |
reg = <0x300>; |
| 122 |
next-level-cache = <&l2_300>; |
| 123 |
clocks = <&apss_clk APSS_SILVER_CORE_CLK>; |
| 124 |
clock-names = "cpu"; |
| 125 |
operating-points-v2 = <&cpu_opp_table>; |
| 126 |
interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; |
| 127 |
#cooling-cells = <2>; |
| 128 |
|
| 129 |
l2_300: l2-cache { |
| 130 |
compatible = "cache"; |
| 131 |
cache-level = <2>; |
| 132 |
cache-unified; |
| 133 |
next-level-cache = <&l3_0>; |
| 134 |
}; |
| 135 |
}; |
| 136 |
}; |
| 137 |
|
| 138 |
firmware { |
| 139 |
scm { |
| 140 |
compatible = "qcom,scm-ipq5424", "qcom,scm"; |
| 141 |
qcom,dload-mode = <&tcsr 0x25100>; |
| 142 |
}; |
| 143 |
}; |
| 144 |
|
| 145 |
cpu_opp_table: opp-table-cpu { |
| 146 |
compatible = "operating-points-v2-kryo-cpu"; |
| 147 |
opp-shared; |
| 148 |
nvmem-cells = <&cpu_speed_bin>; |
| 149 |
|
| 150 |
opp-816000000 { |
| 151 |
opp-hz = /bits/ 64 <816000000>; |
| 152 |
opp-microvolt = <850000>; |
| 153 |
opp-supported-hw = <0x3>; |
| 154 |
clock-latency-ns = <200000>; |
| 155 |
opp-peak-kBps = <816000>; |
| 156 |
}; |
| 157 |
|
| 158 |
opp-1416000000 { |
| 159 |
opp-hz = /bits/ 64 <1416000000>; |
| 160 |
opp-microvolt = <850000>; |
| 161 |
opp-supported-hw = <0x3>; |
| 162 |
clock-latency-ns = <200000>; |
| 163 |
opp-peak-kBps = <984000>; |
| 164 |
}; |
| 165 |
|
| 166 |
opp-1800000000 { |
| 167 |
opp-hz = /bits/ 64 <1800000000>; |
| 168 |
opp-microvolt = <1000000>; |
| 169 |
opp-supported-hw = <0x1>; |
| 170 |
clock-latency-ns = <200000>; |
| 171 |
opp-peak-kBps = <1272000>; |
| 172 |
}; |
| 173 |
}; |
| 174 |
|
| 175 |
memory@80000000 { |
| 176 |
device_type = "memory"; |
| 177 |
/* We expect the bootloader to fill in the size */ |
| 178 |
reg = <0x0 0x80000000 0x0 0x0>; |
| 179 |
}; |
| 180 |
|
| 181 |
pmu-a55 { |
| 182 |
compatible = "arm,cortex-a55-pmu"; |
| 183 |
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 184 |
}; |
| 185 |
|
| 186 |
pmu-dsu { |
| 187 |
compatible = "arm,dsu-pmu"; |
| 188 |
interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; |
| 189 |
cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| 190 |
}; |
| 191 |
|
| 192 |
psci { |
| 193 |
compatible = "arm,psci-1.0"; |
| 194 |
method = "smc"; |
| 195 |
}; |
| 196 |
|
| 197 |
reserved-memory { |
| 198 |
#address-cells = <2>; |
| 199 |
#size-cells = <2>; |
| 200 |
ranges; |
| 201 |
|
| 202 |
bootloader@8a200000 { |
| 203 |
reg = <0x0 0x8a200000 0x0 0x400000>; |
| 204 |
no-map; |
| 205 |
}; |
| 206 |
|
| 207 |
tz@8a600000 { |
| 208 |
reg = <0x0 0x8a600000 0x0 0x200000>; |
| 209 |
no-map; |
| 210 |
}; |
| 211 |
|
| 212 |
smem@8a800000 { |
| 213 |
compatible = "qcom,smem"; |
| 214 |
reg = <0x0 0x8a800000 0x0 0x32000>; |
| 215 |
no-map; |
| 216 |
|
| 217 |
hwlocks = <&tcsr_mutex 3>; |
| 218 |
}; |
| 219 |
|
| 220 |
tfa@8a832000 { |
| 221 |
reg = <0x0 0x8a832000 0x0 0x80000>; |
| 222 |
no-map; |
| 223 |
status = "disabled"; |
| 224 |
}; |
| 225 |
}; |
| 226 |
|
| 227 |
soc@0 { |
| 228 |
compatible = "simple-bus"; |
| 229 |
#address-cells = <2>; |
| 230 |
#size-cells = <2>; |
| 231 |
ranges = <0 0 0 0 0x10 0>; |
| 232 |
|
| 233 |
pcie0_phy: phy@84000 { |
| 234 |
compatible = "qcom,ipq5424-qmp-gen3x1-pcie-phy", |
| 235 |
"qcom,ipq9574-qmp-gen3x1-pcie-phy"; |
| 236 |
reg = <0x0 0x00084000 0x0 0x1000>; |
| 237 |
clocks = <&gcc GCC_PCIE0_AUX_CLK>, |
| 238 |
<&gcc GCC_PCIE0_AHB_CLK>, |
| 239 |
<&gcc GCC_PCIE0_PIPE_CLK>; |
| 240 |
clock-names = "aux", |
| 241 |
"cfg_ahb", |
| 242 |
"pipe"; |
| 243 |
|
| 244 |
assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>; |
| 245 |
assigned-clock-rates = <20000000>; |
| 246 |
|
| 247 |
resets = <&gcc GCC_PCIE0_PHY_BCR>, |
| 248 |
<&gcc GCC_PCIE0PHY_PHY_BCR>; |
| 249 |
reset-names = "phy", |
| 250 |
"common"; |
| 251 |
|
| 252 |
#clock-cells = <0>; |
| 253 |
clock-output-names = "gcc_pcie0_pipe_clk_src"; |
| 254 |
|
| 255 |
#phy-cells = <0>; |
| 256 |
status = "disabled"; |
| 257 |
}; |
| 258 |
|
| 259 |
pcie1_phy: phy@8c000 { |
| 260 |
compatible = "qcom,ipq5424-qmp-gen3x1-pcie-phy", |
| 261 |
"qcom,ipq9574-qmp-gen3x1-pcie-phy"; |
| 262 |
reg = <0x0 0x0008c000 0x0 0x1000>; |
| 263 |
clocks = <&gcc GCC_PCIE1_AUX_CLK>, |
| 264 |
<&gcc GCC_PCIE1_AHB_CLK>, |
| 265 |
<&gcc GCC_PCIE1_PIPE_CLK>; |
| 266 |
clock-names = "aux", |
| 267 |
"cfg_ahb", |
| 268 |
"pipe"; |
| 269 |
|
| 270 |
assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>; |
| 271 |
assigned-clock-rates = <20000000>; |
| 272 |
|
| 273 |
resets = <&gcc GCC_PCIE1_PHY_BCR>, |
| 274 |
<&gcc GCC_PCIE1PHY_PHY_BCR>; |
| 275 |
reset-names = "phy", |
| 276 |
"common"; |
| 277 |
|
| 278 |
#clock-cells = <0>; |
| 279 |
clock-output-names = "gcc_pcie1_pipe_clk_src"; |
| 280 |
|
| 281 |
#phy-cells = <0>; |
| 282 |
status = "disabled"; |
| 283 |
}; |
| 284 |
|
| 285 |
cmn_pll: clock-controller@9b000 { |
| 286 |
compatible = "qcom,ipq5424-cmn-pll"; |
| 287 |
reg = <0 0x0009b000 0 0x800>; |
| 288 |
clocks = <&ref_48mhz_clk>, |
| 289 |
<&gcc GCC_CMN_12GPLL_AHB_CLK>, |
| 290 |
<&gcc GCC_CMN_12GPLL_SYS_CLK>; |
| 291 |
clock-names = "ref", "ahb", "sys"; |
| 292 |
#clock-cells = <1>; |
| 293 |
assigned-clocks = <&cmn_pll IPQ5424_CMN_PLL_CLK>; |
| 294 |
assigned-clock-rates-u64 = /bits/ 64 <12000000000>; |
| 295 |
}; |
| 296 |
|
| 297 |
efuse@a4000 { |
| 298 |
compatible = "qcom,ipq5424-qfprom", "qcom,qfprom"; |
| 299 |
reg = <0 0x000a4000 0 0x741>; |
| 300 |
#address-cells = <1>; |
| 301 |
#size-cells = <1>; |
| 302 |
|
| 303 |
tsens_sens9_off: s9@3dc { |
| 304 |
reg = <0x3dc 0x1>; |
| 305 |
bits = <4 4>; |
| 306 |
}; |
| 307 |
|
| 308 |
tsens_sens10_off: s10@3dd { |
| 309 |
reg = <0x3dd 0x1>; |
| 310 |
bits = <0 4>; |
| 311 |
}; |
| 312 |
|
| 313 |
tsens_sens11_off: s11@3dd { |
| 314 |
reg = <0x3dd 0x1>; |
| 315 |
bits = <4 4>; |
| 316 |
}; |
| 317 |
|
| 318 |
tsens_sens12_off: s12@3de { |
| 319 |
reg = <0x3de 0x1>; |
| 320 |
bits = <0 4>; |
| 321 |
}; |
| 322 |
|
| 323 |
tsens_sens13_off: s13@3de { |
| 324 |
reg = <0x3de 0x1>; |
| 325 |
bits = <4 4>; |
| 326 |
}; |
| 327 |
|
| 328 |
tsens_sens14_off: s14@3e5 { |
| 329 |
reg = <0x3e5 0x2>; |
| 330 |
bits = <7 4>; |
| 331 |
}; |
| 332 |
|
| 333 |
tsens_sens15_off: s15@3e6 { |
| 334 |
reg = <0x3e6 0x1>; |
| 335 |
bits = <3 4>; |
| 336 |
}; |
| 337 |
|
| 338 |
tsens_mode: mode@419 { |
| 339 |
reg = <0x419 0x1>; |
| 340 |
bits = <0 3>; |
| 341 |
}; |
| 342 |
|
| 343 |
tsens_base0: base0@419 { |
| 344 |
reg = <0x419 0x2>; |
| 345 |
bits = <3 10>; |
| 346 |
}; |
| 347 |
|
| 348 |
tsens_base1: base1@41a { |
| 349 |
reg = <0x41a 0x2>; |
| 350 |
bits = <5 10>; |
| 351 |
}; |
| 352 |
}; |
| 353 |
|
| 354 |
pcie2_phy: phy@f4000 { |
| 355 |
compatible = "qcom,ipq5424-qmp-gen3x2-pcie-phy", |
| 356 |
"qcom,ipq9574-qmp-gen3x2-pcie-phy"; |
| 357 |
reg = <0x0 0x000f4000 0x0 0x2000>; |
| 358 |
clocks = <&gcc GCC_PCIE2_AUX_CLK>, |
| 359 |
<&gcc GCC_PCIE2_AHB_CLK>, |
| 360 |
<&gcc GCC_PCIE2_PIPE_CLK>; |
| 361 |
clock-names = "aux", |
| 362 |
"cfg_ahb", |
| 363 |
"pipe"; |
| 364 |
|
| 365 |
assigned-clocks = <&gcc GCC_PCIE2_AUX_CLK>; |
| 366 |
assigned-clock-rates = <20000000>; |
| 367 |
|
| 368 |
resets = <&gcc GCC_PCIE2_PHY_BCR>, |
| 369 |
<&gcc GCC_PCIE2PHY_PHY_BCR>; |
| 370 |
reset-names = "phy", |
| 371 |
"common"; |
| 372 |
|
| 373 |
#clock-cells = <0>; |
| 374 |
clock-output-names = "gcc_pcie2_pipe_clk_src"; |
| 375 |
|
| 376 |
#phy-cells = <0>; |
| 377 |
status = "disabled"; |
| 378 |
}; |
| 379 |
|
| 380 |
pcie3_phy: phy@fc000 { |
| 381 |
compatible = "qcom,ipq5424-qmp-gen3x2-pcie-phy", |
| 382 |
"qcom,ipq9574-qmp-gen3x2-pcie-phy"; |
| 383 |
reg = <0x0 0x000fc000 0x0 0x2000>; |
| 384 |
clocks = <&gcc GCC_PCIE3_AUX_CLK>, |
| 385 |
<&gcc GCC_PCIE3_AHB_CLK>, |
| 386 |
<&gcc GCC_PCIE3_PIPE_CLK>; |
| 387 |
clock-names = "aux", |
| 388 |
"cfg_ahb", |
| 389 |
"pipe"; |
| 390 |
|
| 391 |
assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>; |
| 392 |
assigned-clock-rates = <20000000>; |
| 393 |
|
| 394 |
resets = <&gcc GCC_PCIE3_PHY_BCR>, |
| 395 |
<&gcc GCC_PCIE3PHY_PHY_BCR>; |
| 396 |
reset-names = "phy", |
| 397 |
"common"; |
| 398 |
|
| 399 |
#clock-cells = <0>; |
| 400 |
clock-output-names = "gcc_pcie3_pipe_clk_src"; |
| 401 |
|
| 402 |
#phy-cells = <0>; |
| 403 |
status = "disabled"; |
| 404 |
}; |
| 405 |
|
| 406 |
tsens: thermal-sensor@4a9000 { |
| 407 |
compatible = "qcom,ipq5424-tsens"; |
| 408 |
reg = <0 0x004a9000 0 0x1000>, |
| 409 |
<0 0x004a8000 0 0x1000>; |
| 410 |
interrupts = <GIC_SPI 105 IRQ_TYPE_EDGE_RISING>; |
| 411 |
interrupt-names = "combined"; |
| 412 |
nvmem-cells = <&tsens_mode>, |
| 413 |
<&tsens_base0>, |
| 414 |
<&tsens_base1>, |
| 415 |
<&tsens_sens9_off>, |
| 416 |
<&tsens_sens10_off>, |
| 417 |
<&tsens_sens11_off>, |
| 418 |
<&tsens_sens12_off>, |
| 419 |
<&tsens_sens13_off>, |
| 420 |
<&tsens_sens14_off>, |
| 421 |
<&tsens_sens15_off>; |
| 422 |
nvmem-cell-names = "mode", |
| 423 |
"base0", |
| 424 |
"base1", |
| 425 |
"tsens_sens9_off", |
| 426 |
"tsens_sens10_off", |
| 427 |
"tsens_sens11_off", |
| 428 |
"tsens_sens12_off", |
| 429 |
"tsens_sens13_off", |
| 430 |
"tsens_sens14_off", |
| 431 |
"tsens_sens15_off"; |
| 432 |
#qcom,sensors = <7>; |
| 433 |
#thermal-sensor-cells = <1>; |
| 434 |
}; |
| 435 |
|
| 436 |
rng: rng@4c3000 { |
| 437 |
compatible = "qcom,ipq5424-trng", "qcom,trng"; |
| 438 |
reg = <0 0x004c3000 0 0x1000>; |
| 439 |
clocks = <&gcc GCC_PRNG_AHB_CLK>; |
| 440 |
clock-names = "core"; |
| 441 |
}; |
| 442 |
|
| 443 |
system-cache-controller@800000 { |
| 444 |
compatible = "qcom,ipq5424-llcc"; |
| 445 |
reg = <0 0x00800000 0 0x200000>; |
| 446 |
reg-names = "llcc0_base"; |
| 447 |
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| 448 |
}; |
| 449 |
|
| 450 |
qfprom@a6000 { |
| 451 |
compatible = "qcom,ipq5424-qfprom", "qcom,qfprom"; |
| 452 |
reg = <0x0 0x000a6000 0x0 0x1000>; |
| 453 |
#address-cells = <1>; |
| 454 |
#size-cells = <1>; |
| 455 |
|
| 456 |
cpu_speed_bin: cpu-speed-bin@234 { |
| 457 |
reg = <0x234 0x1>; |
| 458 |
bits = <0 8>; |
| 459 |
}; |
| 460 |
}; |
| 461 |
|
| 462 |
tlmm: pinctrl@1000000 { |
| 463 |
compatible = "qcom,ipq5424-tlmm"; |
| 464 |
reg = <0 0x01000000 0 0x300000>; |
| 465 |
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 466 |
gpio-controller; |
| 467 |
#gpio-cells = <2>; |
| 468 |
gpio-ranges = <&tlmm 0 0 50>; |
| 469 |
interrupt-controller; |
| 470 |
#interrupt-cells = <2>; |
| 471 |
|
| 472 |
uart1_pins: uart1-state { |
| 473 |
pins = "gpio43", "gpio44"; |
| 474 |
function = "uart1"; |
| 475 |
drive-strength = <8>; |
| 476 |
bias-pull-up; |
| 477 |
}; |
| 478 |
}; |
| 479 |
|
| 480 |
gcc: clock-controller@1800000 { |
| 481 |
compatible = "qcom,ipq5424-gcc"; |
| 482 |
reg = <0 0x01800000 0 0x40000>; |
| 483 |
clocks = <&xo_board>, |
| 484 |
<&sleep_clk>, |
| 485 |
<&pcie0_phy>, |
| 486 |
<&pcie1_phy>, |
| 487 |
<&pcie2_phy>, |
| 488 |
<&pcie3_phy>, |
| 489 |
<0>; |
| 490 |
#clock-cells = <1>; |
| 491 |
#reset-cells = <1>; |
| 492 |
#interconnect-cells = <1>; |
| 493 |
}; |
| 494 |
|
| 495 |
tcsr_mutex: hwlock@1905000 { |
| 496 |
compatible = "qcom,tcsr-mutex"; |
| 497 |
reg = <0 0x01905000 0 0x20000>; |
| 498 |
#hwlock-cells = <1>; |
| 499 |
}; |
| 500 |
|
| 501 |
tcsr: syscon@1937000 { |
| 502 |
compatible = "qcom,tcsr-ipq5424", "syscon"; |
| 503 |
reg = <0 0x01937000 0 0x2a000>; |
| 504 |
}; |
| 505 |
|
| 506 |
qupv3: geniqup@1ac0000 { |
| 507 |
compatible = "qcom,geni-se-qup"; |
| 508 |
reg = <0 0x01ac0000 0 0x2000>; |
| 509 |
ranges; |
| 510 |
clocks = <&gcc GCC_QUPV3_AHB_MST_CLK>, |
| 511 |
<&gcc GCC_QUPV3_AHB_SLV_CLK>; |
| 512 |
clock-names = "m-ahb", "s-ahb"; |
| 513 |
#address-cells = <2>; |
| 514 |
#size-cells = <2>; |
| 515 |
|
| 516 |
uart0: serial@1a80000 { |
| 517 |
compatible = "qcom,geni-uart"; |
| 518 |
reg = <0 0x01a80000 0 0x4000>; |
| 519 |
clocks = <&gcc GCC_QUPV3_UART0_CLK>; |
| 520 |
clock-names = "se"; |
| 521 |
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; |
| 522 |
status = "disabled"; |
| 523 |
}; |
| 524 |
|
| 525 |
uart1: serial@1a84000 { |
| 526 |
compatible = "qcom,geni-debug-uart"; |
| 527 |
reg = <0 0x01a84000 0 0x4000>; |
| 528 |
clocks = <&gcc GCC_QUPV3_UART1_CLK>; |
| 529 |
clock-names = "se"; |
| 530 |
interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; |
| 531 |
}; |
| 532 |
|
| 533 |
spi0: spi@1a90000 { |
| 534 |
compatible = "qcom,geni-spi"; |
| 535 |
reg = <0 0x01a90000 0 0x4000>; |
| 536 |
clocks = <&gcc GCC_QUPV3_SPI0_CLK>; |
| 537 |
clock-names = "se"; |
| 538 |
interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; |
| 539 |
#address-cells = <1>; |
| 540 |
#size-cells = <0>; |
| 541 |
status = "disabled"; |
| 542 |
}; |
| 543 |
|
| 544 |
spi1: spi@1a94000 { |
| 545 |
compatible = "qcom,geni-spi"; |
| 546 |
reg = <0 0x01a94000 0 0x4000>; |
| 547 |
clocks = <&gcc GCC_QUPV3_SPI1_CLK>; |
| 548 |
clock-names = "se"; |
| 549 |
interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; |
| 550 |
#address-cells = <1>; |
| 551 |
#size-cells = <0>; |
| 552 |
status = "disabled"; |
| 553 |
}; |
| 554 |
}; |
| 555 |
|
| 556 |
sdhc: mmc@7804000 { |
| 557 |
compatible = "qcom,ipq5424-sdhci", "qcom,sdhci-msm-v5"; |
| 558 |
reg = <0 0x07804000 0 0x1000>, <0 0x07805000 0 0x1000>; |
| 559 |
reg-names = "hc", "cqhci"; |
| 560 |
|
| 561 |
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| 562 |
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; |
| 563 |
interrupt-names = "hc_irq", "pwr_irq"; |
| 564 |
|
| 565 |
clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| 566 |
<&gcc GCC_SDCC1_APPS_CLK>, |
| 567 |
<&xo_board>; |
| 568 |
clock-names = "iface", "core", "xo"; |
| 569 |
|
| 570 |
supports-cqe; |
| 571 |
|
| 572 |
status = "disabled"; |
| 573 |
}; |
| 574 |
|
| 575 |
intc: interrupt-controller@f200000 { |
| 576 |
compatible = "arm,gic-v3"; |
| 577 |
reg = <0 0xf200000 0 0x10000>, /* GICD */ |
| 578 |
<0 0xf240000 0 0x80000>; /* GICR * 4 regions */ |
| 579 |
#address-cells = <0>; |
| 580 |
#interrupt-cells = <0x3>; |
| 581 |
interrupt-controller; |
| 582 |
#redistributor-regions = <1>; |
| 583 |
redistributor-stride = <0x0 0x20000>; |
| 584 |
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 585 |
mbi-ranges = <672 128>; |
| 586 |
msi-controller; |
| 587 |
}; |
| 588 |
|
| 589 |
watchdog@f410000 { |
| 590 |
compatible = "qcom,apss-wdt-ipq5424", "qcom,kpss-wdt"; |
| 591 |
reg = <0 0x0f410000 0 0x1000>; |
| 592 |
interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; |
| 593 |
clocks = <&sleep_clk>; |
| 594 |
}; |
| 595 |
|
| 596 |
qusb_phy_1: phy@71000 { |
| 597 |
compatible = "qcom,ipq5424-qusb2-phy"; |
| 598 |
reg = <0 0x00071000 0 0x180>; |
| 599 |
#phy-cells = <0>; |
| 600 |
|
| 601 |
clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, |
| 602 |
<&xo_board>; |
| 603 |
clock-names = "cfg_ahb", "ref"; |
| 604 |
|
| 605 |
resets = <&gcc GCC_QUSB2_1_PHY_BCR>; |
| 606 |
status = "disabled"; |
| 607 |
}; |
| 608 |
|
| 609 |
usb2: usb2@1e00000 { |
| 610 |
compatible = "qcom,ipq5424-dwc3", "qcom,dwc3"; |
| 611 |
reg = <0 0x01ef8800 0 0x400>; |
| 612 |
#address-cells = <2>; |
| 613 |
#size-cells = <2>; |
| 614 |
ranges; |
| 615 |
|
| 616 |
clocks = <&gcc GCC_USB1_MASTER_CLK>, |
| 617 |
<&gcc GCC_USB1_SLEEP_CLK>, |
| 618 |
<&gcc GCC_USB1_MOCK_UTMI_CLK>, |
| 619 |
<&gcc GCC_USB1_PHY_CFG_AHB_CLK>, |
| 620 |
<&gcc GCC_CNOC_USB_CLK>; |
| 621 |
|
| 622 |
clock-names = "core", |
| 623 |
"sleep", |
| 624 |
"mock_utmi", |
| 625 |
"iface", |
| 626 |
"cfg_noc"; |
| 627 |
|
| 628 |
assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>, |
| 629 |
<&gcc GCC_USB1_MOCK_UTMI_CLK>; |
| 630 |
assigned-clock-rates = <200000000>, |
| 631 |
<24000000>; |
| 632 |
|
| 633 |
interrupts-extended = <&intc GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, |
| 634 |
<&intc GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, |
| 635 |
<&intc GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, |
| 636 |
<&intc GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>; |
| 637 |
interrupt-names = "pwr_event", |
| 638 |
"qusb2_phy", |
| 639 |
"dm_hs_phy_irq", |
| 640 |
"dp_hs_phy_irq"; |
| 641 |
|
| 642 |
resets = <&gcc GCC_USB1_BCR>; |
| 643 |
qcom,select-utmi-as-pipe-clk; |
| 644 |
status = "disabled"; |
| 645 |
|
| 646 |
dwc_1: usb@1e00000 { |
| 647 |
compatible = "snps,dwc3"; |
| 648 |
reg = <0 0x01e00000 0 0xe000>; |
| 649 |
clocks = <&gcc GCC_USB1_MOCK_UTMI_CLK>; |
| 650 |
clock-names = "ref"; |
| 651 |
interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>; |
| 652 |
phys = <&qusb_phy_1>; |
| 653 |
phy-names = "usb2-phy"; |
| 654 |
tx-fifo-resize; |
| 655 |
snps,is-utmi-l1-suspend; |
| 656 |
snps,hird-threshold = /bits/ 8 <0x0>; |
| 657 |
snps,dis_u2_susphy_quirk; |
| 658 |
snps,dis_u3_susphy_quirk; |
| 659 |
}; |
| 660 |
}; |
| 661 |
|
| 662 |
qusb_phy_0: phy@7b000 { |
| 663 |
compatible = "qcom,ipq5424-qusb2-phy"; |
| 664 |
reg = <0 0x0007b000 0 0x180>; |
| 665 |
#phy-cells = <0>; |
| 666 |
|
| 667 |
clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, |
| 668 |
<&xo_board>; |
| 669 |
clock-names = "cfg_ahb", "ref"; |
| 670 |
|
| 671 |
resets = <&gcc GCC_QUSB2_0_PHY_BCR>; |
| 672 |
status = "disabled"; |
| 673 |
}; |
| 674 |
|
| 675 |
ssphy_0: phy@7d000 { |
| 676 |
compatible = "qcom,ipq5424-qmp-usb3-phy"; |
| 677 |
reg = <0 0x0007d000 0 0xa00>; |
| 678 |
#phy-cells = <0>; |
| 679 |
|
| 680 |
clocks = <&gcc GCC_USB0_AUX_CLK>, |
| 681 |
<&xo_board>, |
| 682 |
<&gcc GCC_USB0_PHY_CFG_AHB_CLK>, |
| 683 |
<&gcc GCC_USB0_PIPE_CLK>; |
| 684 |
clock-names = "aux", |
| 685 |
"ref", |
| 686 |
"cfg_ahb", |
| 687 |
"pipe"; |
| 688 |
|
| 689 |
resets = <&gcc GCC_USB0_PHY_BCR>, |
| 690 |
<&gcc GCC_USB3PHY_0_PHY_BCR>; |
| 691 |
reset-names = "phy", |
| 692 |
"phy_phy"; |
| 693 |
|
| 694 |
#clock-cells = <0>; |
| 695 |
clock-output-names = "usb0_pipe_clk"; |
| 696 |
|
| 697 |
status = "disabled"; |
| 698 |
}; |
| 699 |
|
| 700 |
usb3: usb3@8a00000 { |
| 701 |
compatible = "qcom,ipq5424-dwc3", "qcom,dwc3"; |
| 702 |
reg = <0 0x08af8800 0 0x400>; |
| 703 |
|
| 704 |
#address-cells = <2>; |
| 705 |
#size-cells = <2>; |
| 706 |
ranges; |
| 707 |
|
| 708 |
clocks = <&gcc GCC_USB0_MASTER_CLK>, |
| 709 |
<&gcc GCC_USB0_SLEEP_CLK>, |
| 710 |
<&gcc GCC_USB0_MOCK_UTMI_CLK>, |
| 711 |
<&gcc GCC_USB0_PHY_CFG_AHB_CLK>, |
| 712 |
<&gcc GCC_CNOC_USB_CLK>; |
| 713 |
|
| 714 |
clock-names = "core", |
| 715 |
"sleep", |
| 716 |
"mock_utmi", |
| 717 |
"iface", |
| 718 |
"cfg_noc"; |
| 719 |
|
| 720 |
assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>, |
| 721 |
<&gcc GCC_USB0_MOCK_UTMI_CLK>; |
| 722 |
assigned-clock-rates = <200000000>, |
| 723 |
<24000000>; |
| 724 |
|
| 725 |
interrupts-extended = <&intc GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, |
| 726 |
<&intc GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, |
| 727 |
<&intc GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, |
| 728 |
<&intc GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>; |
| 729 |
interrupt-names = "pwr_event", |
| 730 |
"qusb2_phy", |
| 731 |
"dm_hs_phy_irq", |
| 732 |
"dp_hs_phy_irq"; |
| 733 |
|
| 734 |
resets = <&gcc GCC_USB_BCR>; |
| 735 |
status = "disabled"; |
| 736 |
|
| 737 |
dwc_0: usb@8a00000 { |
| 738 |
compatible = "snps,dwc3"; |
| 739 |
reg = <0 0x08a00000 0 0xcd00>; |
| 740 |
clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>; |
| 741 |
clock-names = "ref"; |
| 742 |
interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>; |
| 743 |
phys = <&qusb_phy_0>, <&ssphy_0>; |
| 744 |
phy-names = "usb2-phy", "usb3-phy"; |
| 745 |
tx-fifo-resize; |
| 746 |
snps,is-utmi-l1-suspend; |
| 747 |
snps,hird-threshold = /bits/ 8 <0x0>; |
| 748 |
snps,dis_u2_susphy_quirk; |
| 749 |
snps,dis_u3_susphy_quirk; |
| 750 |
snps,dis-u1-entry-quirk; |
| 751 |
snps,dis-u2-entry-quirk; |
| 752 |
}; |
| 753 |
}; |
| 754 |
|
| 755 |
timer@f420000 { |
| 756 |
compatible = "arm,armv7-timer-mem"; |
| 757 |
reg = <0 0xf420000 0 0x1000>; |
| 758 |
ranges = <0 0 0 0x10000000>; |
| 759 |
#address-cells = <1>; |
| 760 |
#size-cells = <1>; |
| 761 |
|
| 762 |
frame@f421000 { |
| 763 |
reg = <0xf421000 0x1000>, |
| 764 |
<0xf422000 0x1000>; |
| 765 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 766 |
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 767 |
frame-number = <0>; |
| 768 |
}; |
| 769 |
|
| 770 |
frame@f423000 { |
| 771 |
reg = <0xf423000 0x1000>; |
| 772 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 773 |
frame-number = <1>; |
| 774 |
status = "disabled"; |
| 775 |
}; |
| 776 |
|
| 777 |
frame@f425000 { |
| 778 |
reg = <0xf425000 0x1000>, |
| 779 |
<0xf426000 0x1000>; |
| 780 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 781 |
frame-number = <2>; |
| 782 |
status = "disabled"; |
| 783 |
}; |
| 784 |
|
| 785 |
frame@f427000 { |
| 786 |
reg = <0xf427000 0x1000>; |
| 787 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 788 |
frame-number = <3>; |
| 789 |
status = "disabled"; |
| 790 |
}; |
| 791 |
|
| 792 |
frame@f429000 { |
| 793 |
reg = <0xf429000 0x1000>; |
| 794 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 795 |
frame-number = <4>; |
| 796 |
status = "disabled"; |
| 797 |
}; |
| 798 |
|
| 799 |
frame@f42b000 { |
| 800 |
reg = <0xf42b000 0x1000>; |
| 801 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 802 |
frame-number = <5>; |
| 803 |
status = "disabled"; |
| 804 |
}; |
| 805 |
|
| 806 |
frame@f42d000 { |
| 807 |
reg = <0xf42d000 0x1000>; |
| 808 |
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 809 |
frame-number = <6>; |
| 810 |
status = "disabled"; |
| 811 |
}; |
| 812 |
}; |
| 813 |
|
| 814 |
apss_clk: clock-controller@fa80000 { |
| 815 |
compatible = "qcom,ipq5424-apss-clk"; |
| 816 |
reg = <0x0 0x0fa80000 0x0 0x20000>; |
| 817 |
clocks = <&xo_board>, |
| 818 |
<&gcc GPLL0>; |
| 819 |
#clock-cells = <1>; |
| 820 |
#interconnect-cells = <1>; |
| 821 |
}; |
| 822 |
|
| 823 |
clock-controller@39b00000 { |
| 824 |
compatible = "qcom,ipq5424-nsscc"; |
| 825 |
reg = <0 0x39b00000 0 0x100000>; |
| 826 |
clocks = <&cmn_pll IPQ5424_XO_24MHZ_CLK>, |
| 827 |
<&cmn_pll IPQ5424_NSS_300MHZ_CLK>, |
| 828 |
<&cmn_pll IPQ5424_PPE_375MHZ_CLK>, |
| 829 |
<&gcc GPLL0_OUT_AUX>, |
| 830 |
<0>, |
| 831 |
<0>, |
| 832 |
<0>, |
| 833 |
<0>, |
| 834 |
<0>, |
| 835 |
<0>, |
| 836 |
<&gcc GCC_NSSCC_CLK>; |
| 837 |
clock-names = "xo", |
| 838 |
"nss", |
| 839 |
"ppe", |
| 840 |
"gpll0_out", |
| 841 |
"uniphy0_rx", |
| 842 |
"uniphy0_tx", |
| 843 |
"uniphy1_rx", |
| 844 |
"uniphy1_tx", |
| 845 |
"uniphy2_rx", |
| 846 |
"uniphy2_tx", |
| 847 |
"bus"; |
| 848 |
#clock-cells = <1>; |
| 849 |
#reset-cells = <1>; |
| 850 |
#interconnect-cells = <1>; |
| 851 |
}; |
| 852 |
|
| 853 |
pcie3: pcie@40000000 { |
| 854 |
compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574"; |
| 855 |
reg = <0x0 0x40000000 0x0 0xf1c>, |
| 856 |
<0x0 0x40000f20 0x0 0xa8>, |
| 857 |
<0x0 0x40001000 0x0 0x1000>, |
| 858 |
<0x0 0x000f8000 0x0 0x3000>, |
| 859 |
<0x0 0x40100000 0x0 0x1000>, |
| 860 |
<0x0 0x000fe000 0x0 0x1000>; |
| 861 |
reg-names = "dbi", |
| 862 |
"elbi", |
| 863 |
"atu", |
| 864 |
"parf", |
| 865 |
"config", |
| 866 |
"mhi"; |
| 867 |
device_type = "pci"; |
| 868 |
linux,pci-domain = <3>; |
| 869 |
num-lanes = <2>; |
| 870 |
#address-cells = <3>; |
| 871 |
#size-cells = <2>; |
| 872 |
|
| 873 |
ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x00100000>, |
| 874 |
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x0fd00000>; |
| 875 |
|
| 876 |
msi-map = <0x0 &intc 0x0 0x1000>; |
| 877 |
|
| 878 |
interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, |
| 879 |
<GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, |
| 880 |
<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, |
| 881 |
<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, |
| 882 |
<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, |
| 883 |
<GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, |
| 884 |
<GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, |
| 885 |
<GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, |
| 886 |
<GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>; |
| 887 |
|
| 888 |
interrupt-names = "msi0", |
| 889 |
"msi1", |
| 890 |
"msi2", |
| 891 |
"msi3", |
| 892 |
"msi4", |
| 893 |
"msi5", |
| 894 |
"msi6", |
| 895 |
"msi7", |
| 896 |
"global"; |
| 897 |
|
| 898 |
#interrupt-cells = <1>; |
| 899 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 900 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, |
| 901 |
<0 0 0 2 &intc GIC_SPI 480 IRQ_TYPE_LEVEL_HIGH>, |
| 902 |
<0 0 0 3 &intc GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>, |
| 903 |
<0 0 0 4 &intc GIC_SPI 482 IRQ_TYPE_LEVEL_HIGH>; |
| 904 |
|
| 905 |
clocks = <&gcc GCC_PCIE3_AXI_M_CLK>, |
| 906 |
<&gcc GCC_PCIE3_AXI_S_CLK>, |
| 907 |
<&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>, |
| 908 |
<&gcc GCC_PCIE3_RCHNG_CLK>, |
| 909 |
<&gcc GCC_PCIE3_AHB_CLK>, |
| 910 |
<&gcc GCC_PCIE3_AUX_CLK>; |
| 911 |
clock-names = "axi_m", |
| 912 |
"axi_s", |
| 913 |
"axi_bridge", |
| 914 |
"rchng", |
| 915 |
"ahb", |
| 916 |
"aux"; |
| 917 |
|
| 918 |
assigned-clocks = <&gcc GCC_PCIE3_RCHNG_CLK>; |
| 919 |
assigned-clock-rates = <100000000>; |
| 920 |
|
| 921 |
resets = <&gcc GCC_PCIE3_PIPE_ARES>, |
| 922 |
<&gcc GCC_PCIE3_CORE_STICKY_RESET>, |
| 923 |
<&gcc GCC_PCIE3_AXI_S_STICKY_RESET>, |
| 924 |
<&gcc GCC_PCIE3_AXI_S_ARES>, |
| 925 |
<&gcc GCC_PCIE3_AXI_M_STICKY_RESET>, |
| 926 |
<&gcc GCC_PCIE3_AXI_M_ARES>, |
| 927 |
<&gcc GCC_PCIE3_AUX_ARES>, |
| 928 |
<&gcc GCC_PCIE3_AHB_ARES>; |
| 929 |
reset-names = "pipe", |
| 930 |
"sticky", |
| 931 |
"axi_s_sticky", |
| 932 |
"axi_s", |
| 933 |
"axi_m_sticky", |
| 934 |
"axi_m", |
| 935 |
"aux", |
| 936 |
"ahb"; |
| 937 |
|
| 938 |
phys = <&pcie3_phy>; |
| 939 |
phy-names = "pciephy"; |
| 940 |
interconnects = <&gcc MASTER_ANOC_PCIE3 &gcc SLAVE_ANOC_PCIE3>, |
| 941 |
<&gcc MASTER_CNOC_PCIE3 &gcc SLAVE_CNOC_PCIE3>; |
| 942 |
interconnect-names = "pcie-mem", "cpu-pcie"; |
| 943 |
|
| 944 |
status = "disabled"; |
| 945 |
|
| 946 |
pcie@0 { |
| 947 |
device_type = "pci"; |
| 948 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 949 |
bus-range = <0x01 0xff>; |
| 950 |
|
| 951 |
#address-cells = <3>; |
| 952 |
#size-cells = <2>; |
| 953 |
ranges; |
| 954 |
}; |
| 955 |
}; |
| 956 |
|
| 957 |
pcie2: pcie@50000000 { |
| 958 |
compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574"; |
| 959 |
reg = <0x0 0x50000000 0x0 0xf1c>, |
| 960 |
<0x0 0x50000f20 0x0 0xa8>, |
| 961 |
<0x0 0x50001000 0x0 0x1000>, |
| 962 |
<0x0 0x000f0000 0x0 0x3000>, |
| 963 |
<0x0 0x50100000 0x0 0x1000>, |
| 964 |
<0x0 0x000f6000 0x0 0x1000>; |
| 965 |
reg-names = "dbi", |
| 966 |
"elbi", |
| 967 |
"atu", |
| 968 |
"parf", |
| 969 |
"config", |
| 970 |
"mhi"; |
| 971 |
device_type = "pci"; |
| 972 |
linux,pci-domain = <2>; |
| 973 |
num-lanes = <2>; |
| 974 |
#address-cells = <3>; |
| 975 |
#size-cells = <2>; |
| 976 |
|
| 977 |
ranges = <0x01000000 0x0 0x00000000 0x0 0x50200000 0x0 0x00100000>, |
| 978 |
<0x02000000 0x0 0x50300000 0x0 0x50300000 0x0 0x0fd00000>; |
| 979 |
|
| 980 |
msi-map = <0x0 &intc 0x0 0x1000>; |
| 981 |
|
| 982 |
interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, |
| 983 |
<GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, |
| 984 |
<GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, |
| 985 |
<GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, |
| 986 |
<GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, |
| 987 |
<GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, |
| 988 |
<GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, |
| 989 |
<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, |
| 990 |
<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>; |
| 991 |
interrupt-names = "msi0", |
| 992 |
"msi1", |
| 993 |
"msi2", |
| 994 |
"msi3", |
| 995 |
"msi4", |
| 996 |
"msi5", |
| 997 |
"msi6", |
| 998 |
"msi7", |
| 999 |
"global"; |
| 1000 |
|
| 1001 |
#interrupt-cells = <1>; |
| 1002 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 1003 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, |
| 1004 |
<0 0 0 2 &intc GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, |
| 1005 |
<0 0 0 3 &intc GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, |
| 1006 |
<0 0 0 4 &intc GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; |
| 1007 |
|
| 1008 |
clocks = <&gcc GCC_PCIE2_AXI_M_CLK>, |
| 1009 |
<&gcc GCC_PCIE2_AXI_S_CLK>, |
| 1010 |
<&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>, |
| 1011 |
<&gcc GCC_PCIE2_RCHNG_CLK>, |
| 1012 |
<&gcc GCC_PCIE2_AHB_CLK>, |
| 1013 |
<&gcc GCC_PCIE2_AUX_CLK>; |
| 1014 |
clock-names = "axi_m", |
| 1015 |
"axi_s", |
| 1016 |
"axi_bridge", |
| 1017 |
"rchng", |
| 1018 |
"ahb", |
| 1019 |
"aux"; |
| 1020 |
|
| 1021 |
assigned-clocks = <&gcc GCC_PCIE2_RCHNG_CLK>; |
| 1022 |
assigned-clock-rates = <100000000>; |
| 1023 |
|
| 1024 |
resets = <&gcc GCC_PCIE2_PIPE_ARES>, |
| 1025 |
<&gcc GCC_PCIE2_CORE_STICKY_RESET>, |
| 1026 |
<&gcc GCC_PCIE2_AXI_S_STICKY_RESET>, |
| 1027 |
<&gcc GCC_PCIE2_AXI_S_ARES>, |
| 1028 |
<&gcc GCC_PCIE2_AXI_M_STICKY_RESET>, |
| 1029 |
<&gcc GCC_PCIE2_AXI_M_ARES>, |
| 1030 |
<&gcc GCC_PCIE2_AUX_ARES>, |
| 1031 |
<&gcc GCC_PCIE2_AHB_ARES>; |
| 1032 |
reset-names = "pipe", |
| 1033 |
"sticky", |
| 1034 |
"axi_s_sticky", |
| 1035 |
"axi_s", |
| 1036 |
"axi_m_sticky", |
| 1037 |
"axi_m", |
| 1038 |
"aux", |
| 1039 |
"ahb"; |
| 1040 |
|
| 1041 |
phys = <&pcie2_phy>; |
| 1042 |
phy-names = "pciephy"; |
| 1043 |
interconnects = <&gcc MASTER_ANOC_PCIE2 &gcc SLAVE_ANOC_PCIE2>, |
| 1044 |
<&gcc MASTER_CNOC_PCIE2 &gcc SLAVE_CNOC_PCIE2>; |
| 1045 |
interconnect-names = "pcie-mem", "cpu-pcie"; |
| 1046 |
|
| 1047 |
status = "disabled"; |
| 1048 |
|
| 1049 |
pcie@0 { |
| 1050 |
device_type = "pci"; |
| 1051 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 1052 |
bus-range = <0x01 0xff>; |
| 1053 |
|
| 1054 |
#address-cells = <3>; |
| 1055 |
#size-cells = <2>; |
| 1056 |
ranges; |
| 1057 |
}; |
| 1058 |
}; |
| 1059 |
|
| 1060 |
pcie1: pcie@60000000 { |
| 1061 |
compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574"; |
| 1062 |
reg = <0x0 0x60000000 0x0 0xf1c>, |
| 1063 |
<0x0 0x60000f20 0x0 0xa8>, |
| 1064 |
<0x0 0x60001000 0x0 0x1000>, |
| 1065 |
<0x0 0x00088000 0x0 0x3000>, |
| 1066 |
<0x0 0x60100000 0x0 0x1000>, |
| 1067 |
<0x0 0x0008e000 0x0 0x1000>; |
| 1068 |
reg-names = "dbi", |
| 1069 |
"elbi", |
| 1070 |
"atu", |
| 1071 |
"parf", |
| 1072 |
"config", |
| 1073 |
"mhi"; |
| 1074 |
device_type = "pci"; |
| 1075 |
linux,pci-domain = <1>; |
| 1076 |
num-lanes = <1>; |
| 1077 |
#address-cells = <3>; |
| 1078 |
#size-cells = <2>; |
| 1079 |
|
| 1080 |
ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x00100000>, |
| 1081 |
<0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x0fd00000>; |
| 1082 |
|
| 1083 |
msi-map = <0x0 &intc 0x0 0x1000>; |
| 1084 |
|
| 1085 |
interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>, |
| 1086 |
<GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>, |
| 1087 |
<GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, |
| 1088 |
<GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, |
| 1089 |
<GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, |
| 1090 |
<GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>, |
| 1091 |
<GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, |
| 1092 |
<GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, |
| 1093 |
<GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>; |
| 1094 |
interrupt-names = "msi0", |
| 1095 |
"msi1", |
| 1096 |
"msi2", |
| 1097 |
"msi3", |
| 1098 |
"msi4", |
| 1099 |
"msi5", |
| 1100 |
"msi6", |
| 1101 |
"msi7", |
| 1102 |
"global"; |
| 1103 |
|
| 1104 |
#interrupt-cells = <1>; |
| 1105 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 1106 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, |
| 1107 |
<0 0 0 2 &intc GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, |
| 1108 |
<0 0 0 3 &intc GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, |
| 1109 |
<0 0 0 4 &intc GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>; |
| 1110 |
|
| 1111 |
clocks = <&gcc GCC_PCIE1_AXI_M_CLK>, |
| 1112 |
<&gcc GCC_PCIE1_AXI_S_CLK>, |
| 1113 |
<&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>, |
| 1114 |
<&gcc GCC_PCIE1_RCHNG_CLK>, |
| 1115 |
<&gcc GCC_PCIE1_AHB_CLK>, |
| 1116 |
<&gcc GCC_PCIE1_AUX_CLK>; |
| 1117 |
clock-names = "axi_m", |
| 1118 |
"axi_s", |
| 1119 |
"axi_bridge", |
| 1120 |
"rchng", |
| 1121 |
"ahb", |
| 1122 |
"aux"; |
| 1123 |
|
| 1124 |
assigned-clocks = <&gcc GCC_PCIE1_RCHNG_CLK>; |
| 1125 |
assigned-clock-rates = <100000000>; |
| 1126 |
|
| 1127 |
resets = <&gcc GCC_PCIE1_PIPE_ARES>, |
| 1128 |
<&gcc GCC_PCIE1_CORE_STICKY_RESET>, |
| 1129 |
<&gcc GCC_PCIE1_AXI_S_STICKY_RESET>, |
| 1130 |
<&gcc GCC_PCIE1_AXI_S_ARES>, |
| 1131 |
<&gcc GCC_PCIE1_AXI_M_STICKY_RESET>, |
| 1132 |
<&gcc GCC_PCIE1_AXI_M_ARES>, |
| 1133 |
<&gcc GCC_PCIE1_AUX_ARES>, |
| 1134 |
<&gcc GCC_PCIE1_AHB_ARES>; |
| 1135 |
reset-names = "pipe", |
| 1136 |
"sticky", |
| 1137 |
"axi_s_sticky", |
| 1138 |
"axi_s", |
| 1139 |
"axi_m_sticky", |
| 1140 |
"axi_m", |
| 1141 |
"aux", |
| 1142 |
"ahb"; |
| 1143 |
|
| 1144 |
phys = <&pcie1_phy>; |
| 1145 |
phy-names = "pciephy"; |
| 1146 |
interconnects = <&gcc MASTER_ANOC_PCIE1 &gcc SLAVE_ANOC_PCIE1>, |
| 1147 |
<&gcc MASTER_CNOC_PCIE1 &gcc SLAVE_CNOC_PCIE1>; |
| 1148 |
interconnect-names = "pcie-mem", "cpu-pcie"; |
| 1149 |
|
| 1150 |
status = "disabled"; |
| 1151 |
|
| 1152 |
pcie@0 { |
| 1153 |
device_type = "pci"; |
| 1154 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 1155 |
bus-range = <0x01 0xff>; |
| 1156 |
|
| 1157 |
#address-cells = <3>; |
| 1158 |
#size-cells = <2>; |
| 1159 |
ranges; |
| 1160 |
}; |
| 1161 |
}; |
| 1162 |
|
| 1163 |
pcie0: pcie@70000000 { |
| 1164 |
compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574"; |
| 1165 |
reg = <0x0 0x70000000 0x0 0xf1c>, |
| 1166 |
<0x0 0x70000f20 0x0 0xa8>, |
| 1167 |
<0x0 0x70001000 0x0 0x1000>, |
| 1168 |
<0x0 0x00080000 0x0 0x3000>, |
| 1169 |
<0x0 0x70100000 0x0 0x1000>, |
| 1170 |
<0x0 0x00086000 0x0 0x1000>; |
| 1171 |
reg-names = "dbi", |
| 1172 |
"elbi", |
| 1173 |
"atu", |
| 1174 |
"parf", |
| 1175 |
"config", |
| 1176 |
"mhi"; |
| 1177 |
device_type = "pci"; |
| 1178 |
linux,pci-domain = <0>; |
| 1179 |
num-lanes = <1>; |
| 1180 |
#address-cells = <3>; |
| 1181 |
#size-cells = <2>; |
| 1182 |
|
| 1183 |
ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x00100000>, |
| 1184 |
<0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x0fd00000>; |
| 1185 |
|
| 1186 |
msi-map = <0x0 &intc 0x0 0x1000>; |
| 1187 |
|
| 1188 |
interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, |
| 1189 |
<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, |
| 1190 |
<GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, |
| 1191 |
<GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, |
| 1192 |
<GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, |
| 1193 |
<GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, |
| 1194 |
<GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, |
| 1195 |
<GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, |
| 1196 |
<GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>; |
| 1197 |
interrupt-names = "msi0", |
| 1198 |
"msi1", |
| 1199 |
"msi2", |
| 1200 |
"msi3", |
| 1201 |
"msi4", |
| 1202 |
"msi5", |
| 1203 |
"msi6", |
| 1204 |
"msi7", |
| 1205 |
"global"; |
| 1206 |
|
| 1207 |
#interrupt-cells = <1>; |
| 1208 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 1209 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, |
| 1210 |
<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, |
| 1211 |
<0 0 0 3 &intc GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>, |
| 1212 |
<0 0 0 4 &intc GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>; |
| 1213 |
|
| 1214 |
clocks = <&gcc GCC_PCIE0_AXI_M_CLK>, |
| 1215 |
<&gcc GCC_PCIE0_AXI_S_CLK>, |
| 1216 |
<&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, |
| 1217 |
<&gcc GCC_PCIE0_RCHNG_CLK>, |
| 1218 |
<&gcc GCC_PCIE0_AHB_CLK>, |
| 1219 |
<&gcc GCC_PCIE0_AUX_CLK>; |
| 1220 |
clock-names = "axi_m", |
| 1221 |
"axi_s", |
| 1222 |
"axi_bridge", |
| 1223 |
"rchng", |
| 1224 |
"ahb", |
| 1225 |
"aux"; |
| 1226 |
|
| 1227 |
assigned-clocks = <&gcc GCC_PCIE0_RCHNG_CLK>; |
| 1228 |
assigned-clock-rates = <100000000>; |
| 1229 |
|
| 1230 |
resets = <&gcc GCC_PCIE0_PIPE_ARES>, |
| 1231 |
<&gcc GCC_PCIE0_CORE_STICKY_RESET>, |
| 1232 |
<&gcc GCC_PCIE0_AXI_S_STICKY_RESET>, |
| 1233 |
<&gcc GCC_PCIE0_AXI_S_ARES>, |
| 1234 |
<&gcc GCC_PCIE0_AXI_M_STICKY_RESET>, |
| 1235 |
<&gcc GCC_PCIE0_AXI_M_ARES>, |
| 1236 |
<&gcc GCC_PCIE0_AUX_ARES>, |
| 1237 |
<&gcc GCC_PCIE0_AHB_ARES>; |
| 1238 |
reset-names = "pipe", |
| 1239 |
"sticky", |
| 1240 |
"axi_s_sticky", |
| 1241 |
"axi_s", |
| 1242 |
"axi_m_sticky", |
| 1243 |
"axi_m", |
| 1244 |
"aux", |
| 1245 |
"ahb"; |
| 1246 |
|
| 1247 |
phys = <&pcie0_phy>; |
| 1248 |
phy-names = "pciephy"; |
| 1249 |
interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>, |
| 1250 |
<&gcc MASTER_CNOC_PCIE0 &gcc SLAVE_CNOC_PCIE0>; |
| 1251 |
interconnect-names = "pcie-mem", "cpu-pcie"; |
| 1252 |
|
| 1253 |
status = "disabled"; |
| 1254 |
|
| 1255 |
pcie@0 { |
| 1256 |
device_type = "pci"; |
| 1257 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 1258 |
bus-range = <0x01 0xff>; |
| 1259 |
|
| 1260 |
#address-cells = <3>; |
| 1261 |
#size-cells = <2>; |
| 1262 |
ranges; |
| 1263 |
}; |
| 1264 |
}; |
| 1265 |
}; |
| 1266 |
|
| 1267 |
thermal_zones: thermal-zones { |
| 1268 |
cpu0-thermal { |
| 1269 |
polling-delay-passive = <100>; |
| 1270 |
thermal-sensors = <&tsens 14>; |
| 1271 |
|
| 1272 |
trips { |
| 1273 |
cpu0_crit: cpu-critical { |
| 1274 |
temperature = <120000>; |
| 1275 |
hysteresis = <9000>; |
| 1276 |
type = "critical"; |
| 1277 |
}; |
| 1278 |
|
| 1279 |
cpu0_alert: cpu-passive { |
| 1280 |
temperature = <110000>; |
| 1281 |
hysteresis = <9000>; |
| 1282 |
type = "passive"; |
| 1283 |
}; |
| 1284 |
}; |
| 1285 |
|
| 1286 |
cooling-maps { |
| 1287 |
map0 { |
| 1288 |
trip = <&cpu0_alert>; |
| 1289 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1290 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1291 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1292 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 1293 |
}; |
| 1294 |
}; |
| 1295 |
}; |
| 1296 |
|
| 1297 |
cpu1-thermal { |
| 1298 |
polling-delay-passive = <100>; |
| 1299 |
thermal-sensors = <&tsens 12>; |
| 1300 |
|
| 1301 |
trips { |
| 1302 |
cpu1_crit: cpu-critical { |
| 1303 |
temperature = <120000>; |
| 1304 |
hysteresis = <9000>; |
| 1305 |
type = "critical"; |
| 1306 |
}; |
| 1307 |
|
| 1308 |
cpu1_alert: cpu-passive { |
| 1309 |
temperature = <110000>; |
| 1310 |
hysteresis = <9000>; |
| 1311 |
type = "passive"; |
| 1312 |
}; |
| 1313 |
}; |
| 1314 |
|
| 1315 |
cooling-maps { |
| 1316 |
map0 { |
| 1317 |
trip = <&cpu1_alert>; |
| 1318 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1319 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1320 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1321 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 1322 |
}; |
| 1323 |
}; |
| 1324 |
}; |
| 1325 |
|
| 1326 |
cpu2-thermal { |
| 1327 |
polling-delay-passive = <100>; |
| 1328 |
thermal-sensors = <&tsens 11>; |
| 1329 |
|
| 1330 |
trips { |
| 1331 |
cpu2_crit: cpu-critical { |
| 1332 |
temperature = <120000>; |
| 1333 |
hysteresis = <9000>; |
| 1334 |
type = "critical"; |
| 1335 |
}; |
| 1336 |
|
| 1337 |
cpu2_alert: cpu-passive { |
| 1338 |
temperature = <110000>; |
| 1339 |
hysteresis = <9000>; |
| 1340 |
type = "passive"; |
| 1341 |
}; |
| 1342 |
}; |
| 1343 |
|
| 1344 |
cooling-maps { |
| 1345 |
map0 { |
| 1346 |
trip = <&cpu2_alert>; |
| 1347 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1348 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1349 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1350 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 1351 |
}; |
| 1352 |
}; |
| 1353 |
}; |
| 1354 |
|
| 1355 |
cpu3-thermal { |
| 1356 |
polling-delay-passive = <100>; |
| 1357 |
thermal-sensors = <&tsens 13>; |
| 1358 |
|
| 1359 |
trips { |
| 1360 |
cpu3_crit: cpu-critical { |
| 1361 |
temperature = <120000>; |
| 1362 |
hysteresis = <9000>; |
| 1363 |
type = "critical"; |
| 1364 |
}; |
| 1365 |
|
| 1366 |
cpu3_alert: cpu-passive { |
| 1367 |
temperature = <110000>; |
| 1368 |
hysteresis = <9000>; |
| 1369 |
type = "passive"; |
| 1370 |
}; |
| 1371 |
}; |
| 1372 |
|
| 1373 |
cooling-maps { |
| 1374 |
map0 { |
| 1375 |
trip = <&cpu3_alert>; |
| 1376 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1377 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1378 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1379 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 1380 |
}; |
| 1381 |
}; |
| 1382 |
}; |
| 1383 |
|
| 1384 |
wcss-tile2-thermal { |
| 1385 |
thermal-sensors = <&tsens 9>; |
| 1386 |
|
| 1387 |
trips { |
| 1388 |
wcss-tile2-critical { |
| 1389 |
temperature = <125000>; |
| 1390 |
hysteresis = <9000>; |
| 1391 |
type = "critical"; |
| 1392 |
}; |
| 1393 |
}; |
| 1394 |
}; |
| 1395 |
|
| 1396 |
wcss-tile3-thermal { |
| 1397 |
thermal-sensors = <&tsens 10>; |
| 1398 |
|
| 1399 |
trips { |
| 1400 |
wcss-tile3-critical { |
| 1401 |
temperature = <125000>; |
| 1402 |
hysteresis = <9000>; |
| 1403 |
type = "critical"; |
| 1404 |
}; |
| 1405 |
}; |
| 1406 |
}; |
| 1407 |
|
| 1408 |
top-glue-thermal { |
| 1409 |
thermal-sensors = <&tsens 15>; |
| 1410 |
|
| 1411 |
trips { |
| 1412 |
top-glue-critical { |
| 1413 |
temperature = <125000>; |
| 1414 |
hysteresis = <9000>; |
| 1415 |
type = "critical"; |
| 1416 |
}; |
| 1417 |
}; |
| 1418 |
}; |
| 1419 |
}; |
| 1420 |
|
| 1421 |
timer { |
| 1422 |
compatible = "arm,armv8-timer"; |
| 1423 |
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, |
| 1424 |
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, |
| 1425 |
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, |
| 1426 |
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, |
| 1427 |
<GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; |
| 1428 |
}; |
| 1429 |
}; |