Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/ipq5424-rdp466.dts

raw
1 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
2 /*
3 * IPQ5424 RDP466 board device tree source
4 *
5 * Copyright (c) 2024-2025 The Linux Foundation. All rights reserved.
6 */
7
8 /dts-v1/;
9
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/leds/common.h>
12 #include "ipq5424.dtsi"
13
14 / {
15 model = "Qualcomm Technologies, Inc. IPQ5424 RDP466";
16 compatible = "qcom,ipq5424-rdp466", "qcom,ipq5424";
17
18 aliases {
19 serial0 = &uart1;
20 };
21
22 gpio-keys {
23 compatible = "gpio-keys";
24 pinctrl-0 = <&gpio_keys_default>;
25 pinctrl-names = "default";
26
27 button-wps {
28 label = "wps";
29 linux,code = <KEY_WPS_BUTTON>;
30 gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
31 debounce-interval = <60>;
32 };
33 };
34
35 leds {
36 compatible = "gpio-leds";
37 pinctrl-0 = <&gpio_leds_default>;
38 pinctrl-names = "default";
39
40 led-0 {
41 color = <LED_COLOR_ID_GREEN>;
42 function = LED_FUNCTION_WLAN;
43 gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
44 linux,default-trigger = "phy0tx";
45 default-state = "off";
46 };
47 };
48
49 vreg_misc_3p3: regulator-usb-3p3 {
50 compatible = "regulator-fixed";
51 regulator-min-microvolt = <3300000>;
52 regulator-max-microvolt = <3300000>;
53 regulator-boot-on;
54 regulator-always-on;
55 regulator-name = "usb_hs_vdda_3p3";
56 };
57
58 vreg_misc_1p8: regulator-usb-1p8 {
59 compatible = "regulator-fixed";
60 regulator-min-microvolt = <1800000>;
61 regulator-max-microvolt = <1800000>;
62 regulator-boot-on;
63 regulator-always-on;
64 regulator-name = "vdda_1p8_usb";
65 };
66
67 vreg_misc_0p925: regulator-usb-0p925 {
68 compatible = "regulator-fixed";
69 regulator-min-microvolt = <925000>;
70 regulator-max-microvolt = <925000>;
71 regulator-boot-on;
72 regulator-always-on;
73 regulator-name = "vdd_core_usb";
74 };
75 };
76
77 &dwc_0 {
78 dr_mode = "host";
79 };
80
81 &dwc_1 {
82 dr_mode = "host";
83 };
84
85 &pcie2 {
86 pinctrl-0 = <&pcie2_default_state>;
87 pinctrl-names = "default";
88
89 perst-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
90
91 status = "okay";
92 };
93
94 &pcie2_phy {
95 status = "okay";
96 };
97
98 &pcie3 {
99 pinctrl-0 = <&pcie3_default_state>;
100 pinctrl-names = "default";
101
102 perst-gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
103
104 status = "okay";
105 };
106
107 &pcie3_phy {
108 status = "okay";
109 };
110
111 &qusb_phy_0 {
112 vdd-supply = <&vreg_misc_0p925>;
113 vdda-pll-supply = <&vreg_misc_1p8>;
114 vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
115
116 status = "okay";
117 };
118
119 &qusb_phy_1 {
120 vdd-supply = <&vreg_misc_0p925>;
121 vdda-pll-supply = <&vreg_misc_1p8>;
122 vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
123
124 status = "okay";
125 };
126
127 &sdhc {
128 pinctrl-0 = <&sdc_default_state>;
129 pinctrl-names = "default";
130
131 status = "okay";
132 };
133
134 &sleep_clk {
135 clock-frequency = <32000>;
136 };
137
138 &spi0 {
139 pinctrl-0 = <&spi0_default_state>;
140 pinctrl-names = "default";
141 status = "okay";
142
143 flash@0 {
144 compatible = "micron,n25q128a11", "jedec,spi-nor";
145 reg = <0>;
146 #address-cells = <1>;
147 #size-cells = <1>;
148 spi-max-frequency = <50000000>;
149 };
150 };
151
152 &ssphy_0 {
153 vdda-pll-supply = <&vreg_misc_1p8>;
154 vdda-phy-supply = <&vreg_misc_0p925>;
155
156 status = "okay";
157 };
158
159 &tlmm {
160 gpio_keys_default: gpio-keys-default-state {
161 pins = "gpio19";
162 function = "gpio";
163 drive-strength = <8>;
164 bias-pull-up;
165 };
166
167 gpio_leds_default: gpio-leds-default-state {
168 pins = "gpio42";
169 function = "gpio";
170 drive-strength = <8>;
171 bias-pull-down;
172 };
173
174 spi0_default_state: spi0-default-state {
175 clk-pins {
176 pins = "gpio6";
177 function = "spi0_clk";
178 drive-strength = <8>;
179 bias-pull-down;
180 };
181
182 cs-pins {
183 pins = "gpio7";
184 function = "spi0_cs";
185 drive-strength = <8>;
186 bias-pull-up;
187 };
188
189 miso-pins {
190 pins = "gpio8";
191 function = "spi0_miso";
192 drive-strength = <8>;
193 bias-pull-down;
194 };
195
196 mosi-pins {
197 pins = "gpio9";
198 function = "spi0_mosi";
199 drive-strength = <8>;
200 bias-pull-down;
201 };
202 };
203
204 sdc_default_state: sdc-default-state {
205 clk-pins {
206 pins = "gpio5";
207 function = "sdc_clk";
208 drive-strength = <8>;
209 bias-disable;
210 };
211
212 cmd-pins {
213 pins = "gpio4";
214 function = "sdc_cmd";
215 drive-strength = <8>;
216 bias-pull-up;
217 };
218
219 data-pins {
220 pins = "gpio0", "gpio1", "gpio2", "gpio3";
221 function = "sdc_data";
222 drive-strength = <8>;
223 bias-pull-up;
224 };
225 };
226
227 uart0_pins: uart0-default-state {
228 pins = "gpio10", "gpio11", "gpio12", "gpio13";
229 function = "uart0";
230 drive-strength = <8>;
231 bias-pull-down;
232 };
233
234 pcie2_default_state: pcie2-default-state {
235 pins = "gpio31";
236 function = "gpio";
237 drive-strength = <8>;
238 bias-pull-up;
239 };
240
241 pcie3_default_state: pcie3-default-state {
242 pins = "gpio34";
243 function = "gpio";
244 drive-strength = <8>;
245 bias-pull-up;
246 };
247 };
248
249 &uart0 {
250 pinctrl-0 = <&uart0_pins>;
251 pinctrl-names = "default";
252 /*
253 * The required initialization for this SE is not handled by the
254 * bootloader. Therefore, keep the device in "reserved" state until
255 * linux gains support for configuring the SE.
256 */
257 status = "reserved";
258 };
259
260 &uart1 {
261 pinctrl-0 = <&uart1_pins>;
262 pinctrl-names = "default";
263 status = "okay";
264 };
265
266 &usb2 {
267 status = "okay";
268 };
269
270 &usb3 {
271 status = "okay";
272 };
273
274 /*
275 * The bootstrap pins for the board select the XO clock frequency that
276 * supports 48 MHZ, 96 MHZ or 192 MHZ. This setting automatically
277 * enables the right dividers, to ensure the reference clock output
278 * from WiFi to the CMN PLL is 48 MHZ.
279 */
280 &ref_48mhz_clk {
281 clock-div = <1>;
282 clock-mult = <1>;
283 };
284
285 /*
286 * The frequency of xo_board is fixed to 24 MHZ, which is routed
287 * from WiFi output clock 48 MHZ divided by 2.
288 */
289 &xo_board {
290 clock-div = <2>;
291 clock-mult = <1>;
292 };
293
294 &xo_clk {
295 clock-frequency = <48000000>;
296 };