| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* IPQ5332 RDP468 board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
#include "ipq5332-rdp-common.dtsi" |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "Qualcomm Technologies, Inc. IPQ5332 MI01.6"; |
| 14 |
compatible = "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332"; |
| 15 |
|
| 16 |
regulator_fixed_5p0: regulator-s0500 { |
| 17 |
compatible = "regulator-fixed"; |
| 18 |
regulator-min-microvolt = <500000>; |
| 19 |
regulator-max-microvolt = <500000>; |
| 20 |
regulator-boot-on; |
| 21 |
regulator-always-on; |
| 22 |
regulator-name = "fixed_5p0"; |
| 23 |
}; |
| 24 |
}; |
| 25 |
|
| 26 |
&blsp1_spi0 { |
| 27 |
pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>; |
| 28 |
pinctrl-names = "default"; |
| 29 |
status = "okay"; |
| 30 |
|
| 31 |
flash@0 { |
| 32 |
compatible = "micron,n25q128a11", "jedec,spi-nor"; |
| 33 |
reg = <0>; |
| 34 |
#address-cells = <1>; |
| 35 |
#size-cells = <1>; |
| 36 |
spi-max-frequency = <50000000>; |
| 37 |
}; |
| 38 |
}; |
| 39 |
|
| 40 |
&sdhc { |
| 41 |
bus-width = <4>; |
| 42 |
max-frequency = <192000000>; |
| 43 |
mmc-ddr-1_8v; |
| 44 |
mmc-hs200-1_8v; |
| 45 |
non-removable; |
| 46 |
pinctrl-0 = <&sdc_default_state>; |
| 47 |
pinctrl-names = "default"; |
| 48 |
status = "okay"; |
| 49 |
}; |
| 50 |
|
| 51 |
/* PINCTRL */ |
| 52 |
|
| 53 |
&tlmm { |
| 54 |
sdc_default_state: sdc-default-state { |
| 55 |
clk-pins { |
| 56 |
pins = "gpio13"; |
| 57 |
function = "sdc_clk"; |
| 58 |
drive-strength = <8>; |
| 59 |
bias-disable; |
| 60 |
}; |
| 61 |
|
| 62 |
cmd-pins { |
| 63 |
pins = "gpio12"; |
| 64 |
function = "sdc_cmd"; |
| 65 |
drive-strength = <8>; |
| 66 |
bias-pull-up; |
| 67 |
}; |
| 68 |
|
| 69 |
data-pins { |
| 70 |
pins = "gpio8", "gpio9", "gpio10", "gpio11"; |
| 71 |
function = "sdc_data"; |
| 72 |
drive-strength = <8>; |
| 73 |
bias-pull-up; |
| 74 |
}; |
| 75 |
}; |
| 76 |
|
| 77 |
spi_0_data_clk_pins: spi-0-data-clk-state { |
| 78 |
pins = "gpio14", "gpio15", "gpio16"; |
| 79 |
function = "blsp0_spi"; |
| 80 |
drive-strength = <2>; |
| 81 |
bias-pull-down; |
| 82 |
}; |
| 83 |
|
| 84 |
spi_0_cs_pins: spi-0-cs-state { |
| 85 |
pins = "gpio17"; |
| 86 |
function = "blsp0_spi"; |
| 87 |
drive-strength = <2>; |
| 88 |
bias-pull-up; |
| 89 |
}; |
| 90 |
}; |
| 91 |
|
| 92 |
&usb { |
| 93 |
status = "okay"; |
| 94 |
}; |
| 95 |
|
| 96 |
&usb_dwc { |
| 97 |
dr_mode = "host"; |
| 98 |
}; |
| 99 |
|
| 100 |
&usbphy0 { |
| 101 |
vdd-supply = <®ulator_fixed_5p0>; |
| 102 |
|
| 103 |
status = "okay"; |
| 104 |
}; |