| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2024, Linaro Limited |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/input/input.h> |
| 7 |
#include <dt-bindings/input/linux-event-codes.h> |
| 8 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 9 |
#include <dt-bindings/spmi/spmi.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
thermal-zones { |
| 13 |
pm8550-thermal { |
| 14 |
polling-delay-passive = <100>; |
| 15 |
|
| 16 |
thermal-sensors = <&pm8550_temp_alarm>; |
| 17 |
|
| 18 |
trips { |
| 19 |
trip0 { |
| 20 |
temperature = <95000>; |
| 21 |
hysteresis = <0>; |
| 22 |
type = "passive"; |
| 23 |
}; |
| 24 |
|
| 25 |
trip1 { |
| 26 |
temperature = <115000>; |
| 27 |
hysteresis = <0>; |
| 28 |
type = "hot"; |
| 29 |
}; |
| 30 |
}; |
| 31 |
}; |
| 32 |
|
| 33 |
pm8550ve-2-thermal { |
| 34 |
polling-delay-passive = <100>; |
| 35 |
|
| 36 |
thermal-sensors = <&pm8550ve_2_temp_alarm>; |
| 37 |
|
| 38 |
trips { |
| 39 |
trip0 { |
| 40 |
temperature = <95000>; |
| 41 |
hysteresis = <0>; |
| 42 |
type = "passive"; |
| 43 |
}; |
| 44 |
|
| 45 |
trip1 { |
| 46 |
temperature = <115000>; |
| 47 |
hysteresis = <0>; |
| 48 |
type = "hot"; |
| 49 |
}; |
| 50 |
}; |
| 51 |
}; |
| 52 |
|
| 53 |
pmc8380-3-thermal { |
| 54 |
polling-delay-passive = <100>; |
| 55 |
|
| 56 |
thermal-sensors = <&pmc8380_3_temp_alarm>; |
| 57 |
|
| 58 |
trips { |
| 59 |
trip0 { |
| 60 |
temperature = <95000>; |
| 61 |
hysteresis = <0>; |
| 62 |
type = "passive"; |
| 63 |
}; |
| 64 |
|
| 65 |
trip1 { |
| 66 |
temperature = <115000>; |
| 67 |
hysteresis = <0>; |
| 68 |
type = "hot"; |
| 69 |
}; |
| 70 |
}; |
| 71 |
}; |
| 72 |
|
| 73 |
pmc8380-4-thermal { |
| 74 |
polling-delay-passive = <100>; |
| 75 |
|
| 76 |
thermal-sensors = <&pmc8380_4_temp_alarm>; |
| 77 |
|
| 78 |
trips { |
| 79 |
trip0 { |
| 80 |
temperature = <95000>; |
| 81 |
hysteresis = <0>; |
| 82 |
type = "passive"; |
| 83 |
}; |
| 84 |
|
| 85 |
trip1 { |
| 86 |
temperature = <115000>; |
| 87 |
hysteresis = <0>; |
| 88 |
type = "hot"; |
| 89 |
}; |
| 90 |
}; |
| 91 |
}; |
| 92 |
|
| 93 |
pmc8380-5-thermal { |
| 94 |
polling-delay-passive = <100>; |
| 95 |
|
| 96 |
thermal-sensors = <&pmc8380_5_temp_alarm>; |
| 97 |
|
| 98 |
trips { |
| 99 |
trip0 { |
| 100 |
temperature = <95000>; |
| 101 |
hysteresis = <0>; |
| 102 |
type = "passive"; |
| 103 |
}; |
| 104 |
|
| 105 |
trip1 { |
| 106 |
temperature = <115000>; |
| 107 |
hysteresis = <0>; |
| 108 |
type = "hot"; |
| 109 |
}; |
| 110 |
}; |
| 111 |
}; |
| 112 |
|
| 113 |
pmc8380_6_thermal: pmc8380-6-thermal { |
| 114 |
polling-delay-passive = <100>; |
| 115 |
|
| 116 |
thermal-sensors = <&pmc8380_6_temp_alarm>; |
| 117 |
|
| 118 |
trips { |
| 119 |
trip0 { |
| 120 |
temperature = <95000>; |
| 121 |
hysteresis = <0>; |
| 122 |
type = "passive"; |
| 123 |
}; |
| 124 |
|
| 125 |
trip1 { |
| 126 |
temperature = <115000>; |
| 127 |
hysteresis = <0>; |
| 128 |
type = "hot"; |
| 129 |
}; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
pm8550ve-8-thermal { |
| 134 |
polling-delay-passive = <100>; |
| 135 |
|
| 136 |
thermal-sensors = <&pm8550ve_8_temp_alarm>; |
| 137 |
|
| 138 |
trips { |
| 139 |
trip0 { |
| 140 |
temperature = <95000>; |
| 141 |
hysteresis = <0>; |
| 142 |
type = "passive"; |
| 143 |
}; |
| 144 |
|
| 145 |
trip1 { |
| 146 |
temperature = <115000>; |
| 147 |
hysteresis = <0>; |
| 148 |
type = "hot"; |
| 149 |
}; |
| 150 |
}; |
| 151 |
}; |
| 152 |
|
| 153 |
pm8550ve-9-thermal { |
| 154 |
polling-delay-passive = <100>; |
| 155 |
|
| 156 |
thermal-sensors = <&pm8550ve_9_temp_alarm>; |
| 157 |
|
| 158 |
trips { |
| 159 |
trip0 { |
| 160 |
temperature = <95000>; |
| 161 |
hysteresis = <0>; |
| 162 |
type = "passive"; |
| 163 |
}; |
| 164 |
|
| 165 |
trip1 { |
| 166 |
temperature = <115000>; |
| 167 |
hysteresis = <0>; |
| 168 |
type = "hot"; |
| 169 |
}; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
pm8010-thermal { |
| 174 |
polling-delay-passive = <100>; |
| 175 |
|
| 176 |
thermal-sensors = <&pm8010_temp_alarm>; |
| 177 |
|
| 178 |
trips { |
| 179 |
trip0 { |
| 180 |
temperature = <95000>; |
| 181 |
hysteresis = <0>; |
| 182 |
type = "passive"; |
| 183 |
}; |
| 184 |
|
| 185 |
trip1 { |
| 186 |
temperature = <115000>; |
| 187 |
hysteresis = <0>; |
| 188 |
type = "hot"; |
| 189 |
}; |
| 190 |
}; |
| 191 |
}; |
| 192 |
}; |
| 193 |
}; |
| 194 |
|
| 195 |
&spmi_bus0 { |
| 196 |
/* PMK8380 */ |
| 197 |
pmk8550: pmic@0 { |
| 198 |
compatible = "qcom,pm8550", "qcom,spmi-pmic"; |
| 199 |
reg = <0x0 SPMI_USID>; |
| 200 |
#address-cells = <1>; |
| 201 |
#size-cells = <0>; |
| 202 |
|
| 203 |
pmk8550_pon: pon@1300 { |
| 204 |
compatible = "qcom,pmk8350-pon"; |
| 205 |
reg = <0x1300>, <0x800>; |
| 206 |
reg-names = "hlos", "pbs"; |
| 207 |
|
| 208 |
pon_pwrkey: pwrkey { |
| 209 |
compatible = "qcom,pmk8350-pwrkey"; |
| 210 |
interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; |
| 211 |
linux,code = <KEY_POWER>; |
| 212 |
}; |
| 213 |
|
| 214 |
pon_resin: resin { |
| 215 |
compatible = "qcom,pmk8350-resin"; |
| 216 |
interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; |
| 217 |
status = "disabled"; |
| 218 |
}; |
| 219 |
}; |
| 220 |
|
| 221 |
pmk8550_rtc: rtc@6100 { |
| 222 |
compatible = "qcom,pmk8350-rtc"; |
| 223 |
reg = <0x6100>, <0x6200>; |
| 224 |
reg-names = "rtc", "alarm"; |
| 225 |
interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; |
| 226 |
qcom,no-alarm; /* alarm owned by ADSP */ |
| 227 |
qcom,uefi-rtc-info; |
| 228 |
}; |
| 229 |
|
| 230 |
pmk8550_sdam_2: nvram@7100 { |
| 231 |
compatible = "qcom,spmi-sdam"; |
| 232 |
reg = <0x7100>; |
| 233 |
#address-cells = <1>; |
| 234 |
#size-cells = <1>; |
| 235 |
ranges = <0 0x7100 0x100>; |
| 236 |
|
| 237 |
reboot_reason: reboot-reason@48 { |
| 238 |
reg = <0x48 0x1>; |
| 239 |
bits = <1 7>; |
| 240 |
}; |
| 241 |
}; |
| 242 |
|
| 243 |
pmk8550_sdam_15: nvram@7e00 { |
| 244 |
compatible = "qcom,spmi-sdam"; |
| 245 |
reg = <0x7e00>; |
| 246 |
#address-cells = <1>; |
| 247 |
#size-cells = <1>; |
| 248 |
ranges = <0 0x7e00 0x100>; |
| 249 |
|
| 250 |
charge_limit_en: charge-limit-en@73 { |
| 251 |
reg = <0x73 0x1>; |
| 252 |
}; |
| 253 |
|
| 254 |
charge_limit_end: charge-limit-end@75 { |
| 255 |
reg = <0x75 0x1>; |
| 256 |
}; |
| 257 |
|
| 258 |
charge_limit_delta: charge-limit-delta@76 { |
| 259 |
reg = <0x76 0x1>; |
| 260 |
}; |
| 261 |
}; |
| 262 |
|
| 263 |
pmk8550_gpios: gpio@8800 { |
| 264 |
compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio"; |
| 265 |
reg = <0xb800>; |
| 266 |
gpio-controller; |
| 267 |
gpio-ranges = <&pmk8550_gpios 0 0 6>; |
| 268 |
#gpio-cells = <2>; |
| 269 |
interrupt-controller; |
| 270 |
#interrupt-cells = <2>; |
| 271 |
}; |
| 272 |
|
| 273 |
pmk8550_pwm: pwm { |
| 274 |
compatible = "qcom,pmk8550-pwm"; |
| 275 |
|
| 276 |
#pwm-cells = <2>; |
| 277 |
|
| 278 |
status = "disabled"; |
| 279 |
}; |
| 280 |
}; |
| 281 |
|
| 282 |
/* PMC8380C */ |
| 283 |
pm8550: pmic@1 { |
| 284 |
compatible = "qcom,pm8550", "qcom,spmi-pmic"; |
| 285 |
reg = <0x1 SPMI_USID>; |
| 286 |
#address-cells = <1>; |
| 287 |
#size-cells = <0>; |
| 288 |
|
| 289 |
pm8550_temp_alarm: temp-alarm@a00 { |
| 290 |
compatible = "qcom,spmi-temp-alarm"; |
| 291 |
reg = <0xa00>; |
| 292 |
interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 293 |
#thermal-sensor-cells = <0>; |
| 294 |
}; |
| 295 |
|
| 296 |
pm8550_gpios: gpio@8800 { |
| 297 |
compatible = "qcom,pm8550-gpio", "qcom,spmi-gpio"; |
| 298 |
reg = <0x8800>; |
| 299 |
gpio-controller; |
| 300 |
gpio-ranges = <&pm8550_gpios 0 0 12>; |
| 301 |
#gpio-cells = <2>; |
| 302 |
interrupt-controller; |
| 303 |
#interrupt-cells = <2>; |
| 304 |
}; |
| 305 |
|
| 306 |
pm8550_flash: led-controller@ee00 { |
| 307 |
compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led"; |
| 308 |
reg = <0xee00>; |
| 309 |
status = "disabled"; |
| 310 |
}; |
| 311 |
|
| 312 |
pm8550_pwm: pwm { |
| 313 |
compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm"; |
| 314 |
#pwm-cells = <2>; |
| 315 |
|
| 316 |
status = "disabled"; |
| 317 |
}; |
| 318 |
}; |
| 319 |
|
| 320 |
/* PMC8380VE */ |
| 321 |
pm8550ve_2: pmic@2 { |
| 322 |
compatible = "qcom,pm8550", "qcom,spmi-pmic"; |
| 323 |
reg = <0x2 SPMI_USID>; |
| 324 |
#address-cells = <1>; |
| 325 |
#size-cells = <0>; |
| 326 |
|
| 327 |
pm8550ve_2_temp_alarm: temp-alarm@a00 { |
| 328 |
compatible = "qcom,spmi-temp-alarm"; |
| 329 |
reg = <0xa00>; |
| 330 |
interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 331 |
#thermal-sensor-cells = <0>; |
| 332 |
}; |
| 333 |
|
| 334 |
pm8550ve_2_gpios: gpio@8800 { |
| 335 |
compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; |
| 336 |
reg = <0x8800>; |
| 337 |
gpio-controller; |
| 338 |
gpio-ranges = <&pm8550ve_2_gpios 0 0 8>; |
| 339 |
#gpio-cells = <2>; |
| 340 |
interrupt-controller; |
| 341 |
#interrupt-cells = <2>; |
| 342 |
}; |
| 343 |
}; |
| 344 |
|
| 345 |
/* PMC8380 is actually not a PM8550 series rebrand */ |
| 346 |
pmc8380_3: pmic@3 { |
| 347 |
compatible = "qcom,pmc8380", "qcom,spmi-pmic"; |
| 348 |
reg = <0x3 SPMI_USID>; |
| 349 |
#address-cells = <1>; |
| 350 |
#size-cells = <0>; |
| 351 |
|
| 352 |
pmc8380_3_temp_alarm: temp-alarm@a00 { |
| 353 |
compatible = "qcom,spmi-temp-alarm"; |
| 354 |
reg = <0xa00>; |
| 355 |
interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 356 |
#thermal-sensor-cells = <0>; |
| 357 |
}; |
| 358 |
|
| 359 |
pmc8380_3_gpios: gpio@8800 { |
| 360 |
compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; |
| 361 |
reg = <0x8800>; |
| 362 |
gpio-controller; |
| 363 |
gpio-ranges = <&pmc8380_3_gpios 0 0 10>; |
| 364 |
#gpio-cells = <2>; |
| 365 |
interrupt-controller; |
| 366 |
#interrupt-cells = <2>; |
| 367 |
}; |
| 368 |
}; |
| 369 |
|
| 370 |
pmc8380_4: pmic@4 { |
| 371 |
compatible = "qcom,pmc8380", "qcom,spmi-pmic"; |
| 372 |
reg = <0x4 SPMI_USID>; |
| 373 |
#address-cells = <1>; |
| 374 |
#size-cells = <0>; |
| 375 |
|
| 376 |
pmc8380_4_temp_alarm: temp-alarm@a00 { |
| 377 |
compatible = "qcom,spmi-temp-alarm"; |
| 378 |
reg = <0xa00>; |
| 379 |
interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 380 |
#thermal-sensor-cells = <0>; |
| 381 |
}; |
| 382 |
|
| 383 |
pmc8380_4_gpios: gpio@8800 { |
| 384 |
compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; |
| 385 |
reg = <0x8800>; |
| 386 |
gpio-controller; |
| 387 |
gpio-ranges = <&pmc8380_4_gpios 0 0 10>; |
| 388 |
#gpio-cells = <2>; |
| 389 |
interrupt-controller; |
| 390 |
#interrupt-cells = <2>; |
| 391 |
}; |
| 392 |
}; |
| 393 |
|
| 394 |
pmc8380_5: pmic@5 { |
| 395 |
compatible = "qcom,pmc8380", "qcom,spmi-pmic"; |
| 396 |
reg = <0x5 SPMI_USID>; |
| 397 |
#address-cells = <1>; |
| 398 |
#size-cells = <0>; |
| 399 |
|
| 400 |
pmc8380_5_temp_alarm: temp-alarm@a00 { |
| 401 |
compatible = "qcom,spmi-temp-alarm"; |
| 402 |
reg = <0xa00>; |
| 403 |
interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 404 |
#thermal-sensor-cells = <0>; |
| 405 |
}; |
| 406 |
|
| 407 |
pmc8380_5_gpios: gpio@8800 { |
| 408 |
compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; |
| 409 |
reg = <0x8800>; |
| 410 |
gpio-controller; |
| 411 |
gpio-ranges = <&pmc8380_5_gpios 0 0 10>; |
| 412 |
#gpio-cells = <2>; |
| 413 |
interrupt-controller; |
| 414 |
#interrupt-cells = <2>; |
| 415 |
}; |
| 416 |
}; |
| 417 |
|
| 418 |
pmc8380_6: pmic@6 { |
| 419 |
compatible = "qcom,pmc8380", "qcom,spmi-pmic"; |
| 420 |
reg = <0x6 SPMI_USID>; |
| 421 |
#address-cells = <1>; |
| 422 |
#size-cells = <0>; |
| 423 |
|
| 424 |
pmc8380_6_temp_alarm: temp-alarm@a00 { |
| 425 |
compatible = "qcom,spmi-temp-alarm"; |
| 426 |
reg = <0xa00>; |
| 427 |
interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 428 |
#thermal-sensor-cells = <0>; |
| 429 |
}; |
| 430 |
|
| 431 |
pmc8380_6_gpios: gpio@8800 { |
| 432 |
compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; |
| 433 |
reg = <0x8800>; |
| 434 |
gpio-controller; |
| 435 |
gpio-ranges = <&pmc8380_6_gpios 0 0 10>; |
| 436 |
#gpio-cells = <2>; |
| 437 |
interrupt-controller; |
| 438 |
#interrupt-cells = <2>; |
| 439 |
}; |
| 440 |
}; |
| 441 |
|
| 442 |
/* PMC8380VE */ |
| 443 |
pm8550ve_8: pmic@8 { |
| 444 |
compatible = "qcom,pm8550", "qcom,spmi-pmic"; |
| 445 |
reg = <0x8 SPMI_USID>; |
| 446 |
#address-cells = <1>; |
| 447 |
#size-cells = <0>; |
| 448 |
|
| 449 |
pm8550ve_8_temp_alarm: temp-alarm@a00 { |
| 450 |
compatible = "qcom,spmi-temp-alarm"; |
| 451 |
reg = <0xa00>; |
| 452 |
interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 453 |
#thermal-sensor-cells = <0>; |
| 454 |
}; |
| 455 |
|
| 456 |
pm8550ve_8_gpios: gpio@8800 { |
| 457 |
compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; |
| 458 |
reg = <0x8800>; |
| 459 |
gpio-controller; |
| 460 |
gpio-ranges = <&pm8550ve_8_gpios 0 0 8>; |
| 461 |
#gpio-cells = <2>; |
| 462 |
interrupt-controller; |
| 463 |
#interrupt-cells = <2>; |
| 464 |
}; |
| 465 |
}; |
| 466 |
|
| 467 |
/* PMC8380VE */ |
| 468 |
pm8550ve_9: pmic@9 { |
| 469 |
compatible = "qcom,pm8550", "qcom,spmi-pmic"; |
| 470 |
reg = <0x9 SPMI_USID>; |
| 471 |
#address-cells = <1>; |
| 472 |
#size-cells = <0>; |
| 473 |
|
| 474 |
pm8550ve_9_temp_alarm: temp-alarm@a00 { |
| 475 |
compatible = "qcom,spmi-temp-alarm"; |
| 476 |
reg = <0xa00>; |
| 477 |
interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 478 |
#thermal-sensor-cells = <0>; |
| 479 |
}; |
| 480 |
|
| 481 |
pm8550ve_9_gpios: gpio@8800 { |
| 482 |
compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; |
| 483 |
reg = <0x8800>; |
| 484 |
gpio-controller; |
| 485 |
gpio-ranges = <&pm8550ve_9_gpios 0 0 8>; |
| 486 |
#gpio-cells = <2>; |
| 487 |
interrupt-controller; |
| 488 |
#interrupt-cells = <2>; |
| 489 |
}; |
| 490 |
}; |
| 491 |
|
| 492 |
pm8010: pmic@c { |
| 493 |
compatible = "qcom,pm8010", "qcom,spmi-pmic"; |
| 494 |
reg = <0xc SPMI_USID>; |
| 495 |
#address-cells = <1>; |
| 496 |
#size-cells = <0>; |
| 497 |
|
| 498 |
status = "disabled"; |
| 499 |
|
| 500 |
pm8010_temp_alarm: temp-alarm@2400 { |
| 501 |
compatible = "qcom,spmi-temp-alarm"; |
| 502 |
reg = <0x2400>; |
| 503 |
interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 504 |
#thermal-sensor-cells = <0>; |
| 505 |
}; |
| 506 |
}; |
| 507 |
}; |
| 508 |
|
| 509 |
&spmi_bus1 { |
| 510 |
smb2360_0: pmic@7 { |
| 511 |
compatible = "qcom,smb2360", "qcom,spmi-pmic"; |
| 512 |
reg = <0x7 SPMI_USID>; |
| 513 |
#address-cells = <1>; |
| 514 |
#size-cells = <0>; |
| 515 |
|
| 516 |
status = "disabled"; |
| 517 |
|
| 518 |
smb2360_0_eusb2_repeater: phy@fd00 { |
| 519 |
compatible = "qcom,smb2360-eusb2-repeater"; |
| 520 |
reg = <0xfd00>; |
| 521 |
#phy-cells = <0>; |
| 522 |
}; |
| 523 |
}; |
| 524 |
|
| 525 |
smb2360_1: pmic@a { |
| 526 |
compatible = "qcom,smb2360", "qcom,spmi-pmic"; |
| 527 |
reg = <0xa SPMI_USID>; |
| 528 |
#address-cells = <1>; |
| 529 |
#size-cells = <0>; |
| 530 |
|
| 531 |
status = "disabled"; |
| 532 |
|
| 533 |
smb2360_1_eusb2_repeater: phy@fd00 { |
| 534 |
compatible = "qcom,smb2360-eusb2-repeater"; |
| 535 |
reg = <0xfd00>; |
| 536 |
#phy-cells = <0>; |
| 537 |
}; |
| 538 |
}; |
| 539 |
|
| 540 |
smb2360_2: pmic@b { |
| 541 |
compatible = "qcom,smb2360", "qcom,spmi-pmic"; |
| 542 |
reg = <0xb SPMI_USID>; |
| 543 |
#address-cells = <1>; |
| 544 |
#size-cells = <0>; |
| 545 |
|
| 546 |
status = "disabled"; |
| 547 |
|
| 548 |
smb2360_2_eusb2_repeater: phy@fd00 { |
| 549 |
compatible = "qcom,smb2360-eusb2-repeater"; |
| 550 |
reg = <0xfd00>; |
| 551 |
#phy-cells = <0>; |
| 552 |
}; |
| 553 |
}; |
| 554 |
|
| 555 |
smb2360_3: pmic@c { |
| 556 |
compatible = "qcom,smb2360", "qcom,spmi-pmic"; |
| 557 |
reg = <0xc SPMI_USID>; |
| 558 |
#address-cells = <1>; |
| 559 |
#size-cells = <0>; |
| 560 |
|
| 561 |
status = "disabled"; |
| 562 |
|
| 563 |
smb2360_3_eusb2_repeater: phy@fd00 { |
| 564 |
compatible = "qcom,smb2360-eusb2-repeater"; |
| 565 |
reg = <0xfd00>; |
| 566 |
#phy-cells = <0>; |
| 567 |
}; |
| 568 |
}; |
| 569 |
}; |