| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (c) 2015, The Linux Foundation. All rights reserved. |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include "msm8916-pm8916.dtsi" |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/input/input.h> |
| 11 |
#include <dt-bindings/leds/common.h> |
| 12 |
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| 13 |
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> |
| 14 |
#include <dt-bindings/sound/apq8016-lpass.h> |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "Qualcomm Technologies, Inc. APQ 8016 SBC"; |
| 18 |
compatible = "qcom,apq8016-sbc", "qcom,apq8016"; |
| 19 |
|
| 20 |
aliases { |
| 21 |
mmc0 = &sdhc_1; /* eMMC */ |
| 22 |
mmc1 = &sdhc_2; /* SD card */ |
| 23 |
serial0 = &blsp_uart2; |
| 24 |
serial1 = &blsp_uart1; |
| 25 |
usid0 = &pm8916_0; |
| 26 |
i2c0 = &blsp_i2c2; |
| 27 |
i2c1 = &blsp_i2c6; |
| 28 |
i2c3 = &blsp_i2c4; |
| 29 |
spi0 = &blsp_spi5; |
| 30 |
spi1 = &blsp_spi3; |
| 31 |
}; |
| 32 |
|
| 33 |
chosen { |
| 34 |
stdout-path = "serial0"; |
| 35 |
}; |
| 36 |
|
| 37 |
reserved-memory { |
| 38 |
ramoops@bff00000 { |
| 39 |
compatible = "ramoops"; |
| 40 |
reg = <0x0 0xbff00000 0x0 0x100000>; |
| 41 |
|
| 42 |
record-size = <0x20000>; |
| 43 |
console-size = <0x20000>; |
| 44 |
ftrace-size = <0x20000>; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
usb2513 { |
| 49 |
compatible = "smsc,usb3503"; |
| 50 |
reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; |
| 51 |
initial-mode = <1>; |
| 52 |
}; |
| 53 |
|
| 54 |
usb_id: usb-id { |
| 55 |
compatible = "linux,extcon-usb-gpio"; |
| 56 |
id-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>; |
| 57 |
pinctrl-names = "default"; |
| 58 |
pinctrl-0 = <&usb_id_default>; |
| 59 |
}; |
| 60 |
|
| 61 |
hdmi-out { |
| 62 |
compatible = "hdmi-connector"; |
| 63 |
type = "a"; |
| 64 |
|
| 65 |
port { |
| 66 |
hdmi_con: endpoint { |
| 67 |
remote-endpoint = <&adv7533_out>; |
| 68 |
}; |
| 69 |
}; |
| 70 |
}; |
| 71 |
|
| 72 |
gpio-keys { |
| 73 |
compatible = "gpio-keys"; |
| 74 |
autorepeat; |
| 75 |
|
| 76 |
pinctrl-names = "default"; |
| 77 |
pinctrl-0 = <&msm_key_volp_n_default>; |
| 78 |
|
| 79 |
button { |
| 80 |
label = "Volume Up"; |
| 81 |
linux,code = <KEY_VOLUMEUP>; |
| 82 |
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; |
| 83 |
}; |
| 84 |
}; |
| 85 |
|
| 86 |
leds { |
| 87 |
pinctrl-names = "default"; |
| 88 |
pinctrl-0 = <&tlmm_leds>, |
| 89 |
<&pm8916_gpios_leds>, |
| 90 |
<&pm8916_mpps_leds>; |
| 91 |
|
| 92 |
compatible = "gpio-leds"; |
| 93 |
|
| 94 |
led-1 { |
| 95 |
label = "apq8016-sbc:green:user1"; |
| 96 |
function = LED_FUNCTION_HEARTBEAT; |
| 97 |
color = <LED_COLOR_ID_GREEN>; |
| 98 |
gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; |
| 99 |
linux,default-trigger = "heartbeat"; |
| 100 |
default-state = "off"; |
| 101 |
}; |
| 102 |
|
| 103 |
led-2 { |
| 104 |
label = "apq8016-sbc:green:user2"; |
| 105 |
function = LED_FUNCTION_DISK_ACTIVITY; |
| 106 |
color = <LED_COLOR_ID_GREEN>; |
| 107 |
gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>; |
| 108 |
linux,default-trigger = "mmc0"; |
| 109 |
default-state = "off"; |
| 110 |
}; |
| 111 |
|
| 112 |
led-3 { |
| 113 |
label = "apq8016-sbc:green:user3"; |
| 114 |
function = LED_FUNCTION_DISK_ACTIVITY; |
| 115 |
color = <LED_COLOR_ID_GREEN>; |
| 116 |
gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; |
| 117 |
linux,default-trigger = "mmc1"; |
| 118 |
default-state = "off"; |
| 119 |
}; |
| 120 |
|
| 121 |
led-4 { |
| 122 |
label = "apq8016-sbc:green:user4"; |
| 123 |
color = <LED_COLOR_ID_GREEN>; |
| 124 |
gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; |
| 125 |
linux,default-trigger = "none"; |
| 126 |
panic-indicator; |
| 127 |
default-state = "off"; |
| 128 |
}; |
| 129 |
|
| 130 |
led-5 { |
| 131 |
label = "apq8016-sbc:yellow:wlan"; |
| 132 |
function = LED_FUNCTION_WLAN; |
| 133 |
color = <LED_COLOR_ID_YELLOW>; |
| 134 |
gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; |
| 135 |
linux,default-trigger = "phy0tx"; |
| 136 |
default-state = "off"; |
| 137 |
}; |
| 138 |
|
| 139 |
led-6 { |
| 140 |
label = "apq8016-sbc:blue:bt"; |
| 141 |
function = LED_FUNCTION_BLUETOOTH; |
| 142 |
color = <LED_COLOR_ID_BLUE>; |
| 143 |
gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; |
| 144 |
linux,default-trigger = "bluetooth-power"; |
| 145 |
default-state = "off"; |
| 146 |
}; |
| 147 |
}; |
| 148 |
}; |
| 149 |
|
| 150 |
&blsp_i2c2 { |
| 151 |
/* On Low speed expansion: LS-I2C0 */ |
| 152 |
status = "okay"; |
| 153 |
}; |
| 154 |
|
| 155 |
&blsp_i2c4 { |
| 156 |
/* On High speed expansion: HS-I2C2 */ |
| 157 |
status = "okay"; |
| 158 |
|
| 159 |
adv_bridge: bridge@39 { |
| 160 |
compatible = "adi,adv7533"; |
| 161 |
reg = <0x39>; |
| 162 |
|
| 163 |
interrupt-parent = <&tlmm>; |
| 164 |
interrupts = <31 IRQ_TYPE_EDGE_FALLING>; |
| 165 |
|
| 166 |
adi,dsi-lanes = <4>; |
| 167 |
clocks = <&rpmcc RPM_SMD_BB_CLK2>; |
| 168 |
clock-names = "cec"; |
| 169 |
|
| 170 |
pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; |
| 171 |
|
| 172 |
avdd-supply = <&pm8916_l6>; |
| 173 |
a2vdd-supply = <&pm8916_l6>; |
| 174 |
dvdd-supply = <&pm8916_l6>; |
| 175 |
pvdd-supply = <&pm8916_l6>; |
| 176 |
v1p2-supply = <&pm8916_l6>; |
| 177 |
v3p3-supply = <&pm8916_l17>; |
| 178 |
|
| 179 |
pinctrl-names = "default","sleep"; |
| 180 |
pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; |
| 181 |
pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; |
| 182 |
#sound-dai-cells = <0>; |
| 183 |
|
| 184 |
ports { |
| 185 |
#address-cells = <1>; |
| 186 |
#size-cells = <0>; |
| 187 |
|
| 188 |
port@0 { |
| 189 |
reg = <0>; |
| 190 |
adv7533_in: endpoint { |
| 191 |
remote-endpoint = <&mdss_dsi0_out>; |
| 192 |
}; |
| 193 |
}; |
| 194 |
|
| 195 |
port@1 { |
| 196 |
reg = <1>; |
| 197 |
adv7533_out: endpoint { |
| 198 |
remote-endpoint = <&hdmi_con>; |
| 199 |
}; |
| 200 |
}; |
| 201 |
}; |
| 202 |
}; |
| 203 |
}; |
| 204 |
|
| 205 |
&blsp_i2c6 { |
| 206 |
/* On Low speed expansion: LS-I2C1 */ |
| 207 |
status = "okay"; |
| 208 |
}; |
| 209 |
|
| 210 |
&blsp_spi3 { |
| 211 |
/* On High speed expansion: HS-SPI1 */ |
| 212 |
status = "okay"; |
| 213 |
}; |
| 214 |
|
| 215 |
&blsp_spi5 { |
| 216 |
/* On Low speed expansion: LS-SPI0 */ |
| 217 |
status = "okay"; |
| 218 |
}; |
| 219 |
|
| 220 |
&blsp_uart1 { |
| 221 |
status = "okay"; |
| 222 |
label = "LS-UART0"; |
| 223 |
pinctrl-0 = <&blsp_uart1_default>; |
| 224 |
pinctrl-1 = <&blsp_uart1_sleep>; |
| 225 |
pinctrl-names = "default", "sleep"; |
| 226 |
}; |
| 227 |
|
| 228 |
&blsp_uart2 { |
| 229 |
status = "okay"; |
| 230 |
label = "LS-UART1"; |
| 231 |
pinctrl-0 = <&blsp_uart2_console_default>; |
| 232 |
pinctrl-1 = <&blsp_uart2_console_sleep>; |
| 233 |
pinctrl-names = "default", "sleep"; |
| 234 |
}; |
| 235 |
|
| 236 |
&camss { |
| 237 |
status = "okay"; |
| 238 |
}; |
| 239 |
|
| 240 |
&gpu { |
| 241 |
status = "okay"; |
| 242 |
}; |
| 243 |
|
| 244 |
&lpass { |
| 245 |
status = "okay"; |
| 246 |
}; |
| 247 |
|
| 248 |
&lpass_codec { |
| 249 |
status = "okay"; |
| 250 |
}; |
| 251 |
|
| 252 |
&mba_mem { |
| 253 |
status = "okay"; |
| 254 |
}; |
| 255 |
|
| 256 |
&mdss { |
| 257 |
status = "okay"; |
| 258 |
}; |
| 259 |
|
| 260 |
&mdss_dsi0_out { |
| 261 |
data-lanes = <0 1 2 3>; |
| 262 |
remote-endpoint = <&adv7533_in>; |
| 263 |
}; |
| 264 |
|
| 265 |
&mpss { |
| 266 |
status = "okay"; |
| 267 |
|
| 268 |
firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn"; |
| 269 |
}; |
| 270 |
|
| 271 |
&mpss_mem { |
| 272 |
status = "okay"; |
| 273 |
reg = <0x0 0x86800000 0x0 0x2b00000>; |
| 274 |
}; |
| 275 |
|
| 276 |
&pm8916_codec { |
| 277 |
status = "okay"; |
| 278 |
qcom,mbhc-vthreshold-low = <75 150 237 450 500>; |
| 279 |
qcom,mbhc-vthreshold-high = <75 150 237 450 500>; |
| 280 |
}; |
| 281 |
|
| 282 |
&pm8916_resin { |
| 283 |
status = "okay"; |
| 284 |
linux,code = <KEY_VOLUMEDOWN>; |
| 285 |
}; |
| 286 |
|
| 287 |
&pm8916_rpm_regulators { |
| 288 |
/* |
| 289 |
* The 96Boards specification expects a 1.8V power rail on the low-speed |
| 290 |
* expansion connector that is able to provide at least 0.18W / 100 mA. |
| 291 |
* L15/L16 are connected in parallel to provide 55 mA each. A minimum load |
| 292 |
* must be specified to ensure the regulators are not put in LPM where they |
| 293 |
* would only provide 5 mA. |
| 294 |
*/ |
| 295 |
pm8916_l15: l15 { |
| 296 |
regulator-min-microvolt = <1800000>; |
| 297 |
regulator-max-microvolt = <1800000>; |
| 298 |
regulator-system-load = <50000>; |
| 299 |
regulator-allow-set-load; |
| 300 |
regulator-always-on; |
| 301 |
}; |
| 302 |
pm8916_l16: l16 { |
| 303 |
regulator-min-microvolt = <1800000>; |
| 304 |
regulator-max-microvolt = <1800000>; |
| 305 |
regulator-system-load = <50000>; |
| 306 |
regulator-allow-set-load; |
| 307 |
regulator-always-on; |
| 308 |
}; |
| 309 |
|
| 310 |
pm8916_l17: l17 { |
| 311 |
regulator-min-microvolt = <3300000>; |
| 312 |
regulator-max-microvolt = <3300000>; |
| 313 |
}; |
| 314 |
}; |
| 315 |
|
| 316 |
&sdhc_1 { |
| 317 |
status = "okay"; |
| 318 |
}; |
| 319 |
|
| 320 |
&sdhc_2 { |
| 321 |
status = "okay"; |
| 322 |
|
| 323 |
pinctrl-names = "default", "sleep"; |
| 324 |
pinctrl-0 = <&sdc2_default &sdc2_cd_default>; |
| 325 |
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; |
| 326 |
|
| 327 |
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; |
| 328 |
}; |
| 329 |
|
| 330 |
&sound { |
| 331 |
status = "okay"; |
| 332 |
|
| 333 |
pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; |
| 334 |
pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; |
| 335 |
pinctrl-names = "default", "sleep"; |
| 336 |
model = "DB410c"; |
| 337 |
audio-routing = |
| 338 |
"AMIC2", "MIC BIAS Internal2", |
| 339 |
"AMIC3", "MIC BIAS External1"; |
| 340 |
|
| 341 |
quaternary-dai-link { |
| 342 |
link-name = "ADV7533"; |
| 343 |
cpu { |
| 344 |
sound-dai = <&lpass MI2S_QUATERNARY>; |
| 345 |
}; |
| 346 |
codec { |
| 347 |
sound-dai = <&adv_bridge>; |
| 348 |
}; |
| 349 |
}; |
| 350 |
|
| 351 |
primary-dai-link { |
| 352 |
link-name = "WCD"; |
| 353 |
cpu { |
| 354 |
sound-dai = <&lpass MI2S_PRIMARY>; |
| 355 |
}; |
| 356 |
codec { |
| 357 |
sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; |
| 358 |
}; |
| 359 |
}; |
| 360 |
|
| 361 |
tertiary-dai-link { |
| 362 |
link-name = "WCD-Capture"; |
| 363 |
cpu { |
| 364 |
sound-dai = <&lpass MI2S_TERTIARY>; |
| 365 |
}; |
| 366 |
codec { |
| 367 |
sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; |
| 368 |
}; |
| 369 |
}; |
| 370 |
}; |
| 371 |
|
| 372 |
&usb { |
| 373 |
status = "okay"; |
| 374 |
extcon = <&usb_id>, <&usb_id>; |
| 375 |
|
| 376 |
pinctrl-names = "default", "device"; |
| 377 |
pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; |
| 378 |
pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; |
| 379 |
}; |
| 380 |
|
| 381 |
&usb_hs_phy { |
| 382 |
extcon = <&usb_id>; |
| 383 |
}; |
| 384 |
|
| 385 |
&venus { |
| 386 |
status = "okay"; |
| 387 |
}; |
| 388 |
|
| 389 |
&venus_mem { |
| 390 |
status = "okay"; |
| 391 |
}; |
| 392 |
|
| 393 |
&wcnss { |
| 394 |
status = "okay"; |
| 395 |
firmware-name = "qcom/apq8016/wcnss.mbn"; |
| 396 |
}; |
| 397 |
|
| 398 |
&wcnss_ctrl { |
| 399 |
firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin"; |
| 400 |
}; |
| 401 |
|
| 402 |
&wcnss_iris { |
| 403 |
compatible = "qcom,wcn3620"; |
| 404 |
}; |
| 405 |
|
| 406 |
&wcnss_mem { |
| 407 |
status = "okay"; |
| 408 |
}; |
| 409 |
|
| 410 |
/* Enable CoreSight */ |
| 411 |
&cti0 { status = "okay"; }; |
| 412 |
&cti1 { status = "okay"; }; |
| 413 |
&cti12 { status = "okay"; }; |
| 414 |
&cti13 { status = "okay"; }; |
| 415 |
&cti14 { status = "okay"; }; |
| 416 |
&cti15 { status = "okay"; }; |
| 417 |
&debug0 { status = "okay"; }; |
| 418 |
&debug1 { status = "okay"; }; |
| 419 |
&debug2 { status = "okay"; }; |
| 420 |
&debug3 { status = "okay"; }; |
| 421 |
&etf { status = "okay"; }; |
| 422 |
&etm0 { status = "okay"; }; |
| 423 |
&etm1 { status = "okay"; }; |
| 424 |
&etm2 { status = "okay"; }; |
| 425 |
&etm3 { status = "okay"; }; |
| 426 |
&etr { status = "okay"; }; |
| 427 |
&funnel0 { status = "okay"; }; |
| 428 |
&funnel1 { status = "okay"; }; |
| 429 |
&replicator { status = "okay"; }; |
| 430 |
&stm { status = "okay"; }; |
| 431 |
&tpiu { status = "okay"; }; |
| 432 |
|
| 433 |
/* |
| 434 |
* 2mA drive strength is not enough when connecting multiple |
| 435 |
* I2C devices with different pull up resistors. |
| 436 |
*/ |
| 437 |
&blsp_i2c2_default { |
| 438 |
drive-strength = <16>; |
| 439 |
}; |
| 440 |
|
| 441 |
&blsp_i2c4_default { |
| 442 |
drive-strength = <16>; |
| 443 |
}; |
| 444 |
|
| 445 |
&blsp_i2c6_default { |
| 446 |
drive-strength = <16>; |
| 447 |
}; |
| 448 |
|
| 449 |
/* |
| 450 |
* GPIO name legend: proper name = the GPIO line is used as GPIO |
| 451 |
* NC = not connected (pin out but not routed from the chip to |
| 452 |
* anything the board) |
| 453 |
* "[PER]" = pin is muxed for [peripheral] (not GPIO) |
| 454 |
* LSEC = Low Speed External Connector |
| 455 |
* HSEC = High Speed External Connector |
| 456 |
* |
| 457 |
* Line names are taken from the schematic "DragonBoard410c" |
| 458 |
* dated monday, august 31, 2015. Page 5 in particular. |
| 459 |
* |
| 460 |
* For the lines routed to the external connectors the |
| 461 |
* lines are named after the 96Boards CE Specification 1.0, |
| 462 |
* Appendix "Expansion Connector Signal Description". |
| 463 |
* |
| 464 |
* When the 96Board naming of a line and the schematic name of |
| 465 |
* the same line are in conflict, the 96Board specification |
| 466 |
* takes precedence, which means that the external UART on the |
| 467 |
* LSEC is named UART0 while the schematic and SoC names this |
| 468 |
* UART3. This is only for the informational lines i.e. "[FOO]", |
| 469 |
* the GPIO named lines "GPIO-A" thru "GPIO-L" are the only |
| 470 |
* ones actually used for GPIO. |
| 471 |
*/ |
| 472 |
|
| 473 |
&tlmm { |
| 474 |
gpio-line-names = |
| 475 |
"[UART0_TX]", /* GPIO_0, LSEC pin 5 */ |
| 476 |
"[UART0_RX]", /* GPIO_1, LSEC pin 7 */ |
| 477 |
"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ |
| 478 |
"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ |
| 479 |
"[UART1_TX]", /* GPIO_4, LSEC pin 11 */ |
| 480 |
"[UART1_RX]", /* GPIO_5, LSEC pin 13 */ |
| 481 |
"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ |
| 482 |
"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ |
| 483 |
"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ |
| 484 |
"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ |
| 485 |
"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ |
| 486 |
"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ |
| 487 |
"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ |
| 488 |
"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ |
| 489 |
"[I2C3_SDA]", /* HSEC pin 38 */ |
| 490 |
"[I2C3_SCL]", /* HSEC pin 36 */ |
| 491 |
"[SPI0_MOSI]", /* LSEC pin 14 */ |
| 492 |
"[SPI0_MISO]", /* LSEC pin 10 */ |
| 493 |
"[SPI0_CS_N]", /* LSEC pin 12 */ |
| 494 |
"[SPI0_CLK]", /* LSEC pin 8 */ |
| 495 |
"HDMI_HPD_N", /* GPIO 20 */ |
| 496 |
"USR_LED_1_CTRL", |
| 497 |
"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ |
| 498 |
"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ |
| 499 |
"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ |
| 500 |
"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ |
| 501 |
"[CSI0_MCLK]", /* HSEC pin 15 */ |
| 502 |
"[CSI1_MCLK]", /* HSEC pin 17 */ |
| 503 |
"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ |
| 504 |
"[I2C2_SDA]", /* HSEC pin 34 */ |
| 505 |
"[I2C2_SCL]", /* HSEC pin 32 */ |
| 506 |
"DSI2HDMI_INT_N", |
| 507 |
"DSI_SW_SEL_APQ", |
| 508 |
"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ |
| 509 |
"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ |
| 510 |
"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ |
| 511 |
"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ |
| 512 |
"FORCED_USB_BOOT", |
| 513 |
"SD_CARD_DET_N", |
| 514 |
"[WCSS_BT_SSBI]", |
| 515 |
"[WCSS_WLAN_DATA_2]", /* GPIO 40 */ |
| 516 |
"[WCSS_WLAN_DATA_1]", |
| 517 |
"[WCSS_WLAN_DATA_0]", |
| 518 |
"[WCSS_WLAN_SET]", |
| 519 |
"[WCSS_WLAN_CLK]", |
| 520 |
"[WCSS_FM_SSBI]", |
| 521 |
"[WCSS_FM_SDI]", |
| 522 |
"[WCSS_BT_DAT_CTL]", |
| 523 |
"[WCSS_BT_DAT_STB]", |
| 524 |
"NC", |
| 525 |
"NC", /* GPIO 50 */ |
| 526 |
"NC", |
| 527 |
"NC", |
| 528 |
"NC", |
| 529 |
"NC", |
| 530 |
"NC", |
| 531 |
"NC", |
| 532 |
"NC", |
| 533 |
"NC", |
| 534 |
"NC", |
| 535 |
"NC", /* GPIO 60 */ |
| 536 |
"NC", |
| 537 |
"NC", |
| 538 |
"[CDC_PDM0_CLK]", |
| 539 |
"[CDC_PDM0_SYNC]", |
| 540 |
"[CDC_PDM0_TX0]", |
| 541 |
"[CDC_PDM0_RX0]", |
| 542 |
"[CDC_PDM0_RX1]", |
| 543 |
"[CDC_PDM0_RX2]", |
| 544 |
"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ |
| 545 |
"NC", /* GPIO 70 */ |
| 546 |
"NC", |
| 547 |
"NC", |
| 548 |
"NC", |
| 549 |
"NC", /* GPIO 74 */ |
| 550 |
"NC", |
| 551 |
"NC", |
| 552 |
"NC", |
| 553 |
"NC", |
| 554 |
"NC", |
| 555 |
"BOOT_CONFIG_0", /* GPIO 80 */ |
| 556 |
"BOOT_CONFIG_1", |
| 557 |
"BOOT_CONFIG_2", |
| 558 |
"BOOT_CONFIG_3", |
| 559 |
"NC", |
| 560 |
"NC", |
| 561 |
"BOOT_CONFIG_5", |
| 562 |
"NC", |
| 563 |
"NC", |
| 564 |
"NC", |
| 565 |
"NC", /* GPIO 90 */ |
| 566 |
"NC", |
| 567 |
"NC", |
| 568 |
"NC", |
| 569 |
"NC", |
| 570 |
"NC", |
| 571 |
"NC", |
| 572 |
"NC", |
| 573 |
"NC", |
| 574 |
"NC", |
| 575 |
"NC", /* GPIO 100 */ |
| 576 |
"NC", |
| 577 |
"NC", |
| 578 |
"NC", |
| 579 |
"SSBI_GPS", |
| 580 |
"NC", |
| 581 |
"NC", |
| 582 |
"KEY_VOLP_N", |
| 583 |
"NC", |
| 584 |
"NC", |
| 585 |
"[LS_EXP_MI2S_WS]", /* GPIO 110 */ |
| 586 |
"NC", |
| 587 |
"NC", |
| 588 |
"[LS_EXP_MI2S_SCK]", |
| 589 |
"[LS_EXP_MI2S_DATA0]", |
| 590 |
"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ |
| 591 |
"NC", |
| 592 |
"[DSI2HDMI_MI2S_WS]", |
| 593 |
"[DSI2HDMI_MI2S_SCK]", |
| 594 |
"[DSI2HDMI_MI2S_DATA0]", |
| 595 |
"USR_LED_2_CTRL", /* GPIO 120 */ |
| 596 |
"SB_HS_ID"; |
| 597 |
|
| 598 |
blsp_uart1_default: blsp-uart1-default-state { |
| 599 |
/* TX, RX, CTS_N, RTS_N */ |
| 600 |
pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| 601 |
function = "blsp_uart1"; |
| 602 |
drive-strength = <16>; |
| 603 |
bias-disable; |
| 604 |
}; |
| 605 |
|
| 606 |
blsp_uart1_sleep: blsp-uart1-sleep-state { |
| 607 |
pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| 608 |
function = "gpio"; |
| 609 |
drive-strength = <2>; |
| 610 |
bias-pull-down; |
| 611 |
}; |
| 612 |
|
| 613 |
sdc2_cd_default: sdc2-cd-default-state { |
| 614 |
pins = "gpio38"; |
| 615 |
function = "gpio"; |
| 616 |
drive-strength = <2>; |
| 617 |
bias-disable; |
| 618 |
}; |
| 619 |
|
| 620 |
tlmm_leds: tlmm-leds-state { |
| 621 |
pins = "gpio21", "gpio120"; |
| 622 |
function = "gpio"; |
| 623 |
|
| 624 |
output-low; |
| 625 |
}; |
| 626 |
|
| 627 |
usb_id_default: usb-id-default-state { |
| 628 |
pins = "gpio121"; |
| 629 |
function = "gpio"; |
| 630 |
|
| 631 |
drive-strength = <8>; |
| 632 |
bias-pull-up; |
| 633 |
}; |
| 634 |
|
| 635 |
adv7533_int_active: adv533-int-active-state { |
| 636 |
pins = "gpio31"; |
| 637 |
function = "gpio"; |
| 638 |
|
| 639 |
drive-strength = <16>; |
| 640 |
bias-disable; |
| 641 |
}; |
| 642 |
|
| 643 |
adv7533_int_suspend: adv7533-int-suspend-state { |
| 644 |
pins = "gpio31"; |
| 645 |
function = "gpio"; |
| 646 |
|
| 647 |
drive-strength = <2>; |
| 648 |
bias-disable; |
| 649 |
}; |
| 650 |
|
| 651 |
adv7533_switch_active: adv7533-switch-active-state { |
| 652 |
pins = "gpio32"; |
| 653 |
function = "gpio"; |
| 654 |
|
| 655 |
drive-strength = <16>; |
| 656 |
bias-disable; |
| 657 |
}; |
| 658 |
|
| 659 |
adv7533_switch_suspend: adv7533-switch-suspend-state { |
| 660 |
pins = "gpio32"; |
| 661 |
function = "gpio"; |
| 662 |
|
| 663 |
drive-strength = <2>; |
| 664 |
bias-disable; |
| 665 |
}; |
| 666 |
|
| 667 |
msm_key_volp_n_default: msm-key-volp-n-default-state { |
| 668 |
pins = "gpio107"; |
| 669 |
function = "gpio"; |
| 670 |
|
| 671 |
drive-strength = <8>; |
| 672 |
bias-pull-up; |
| 673 |
}; |
| 674 |
}; |
| 675 |
|
| 676 |
&pm8916_gpios { |
| 677 |
gpio-line-names = |
| 678 |
"USR_LED_3_CTRL", |
| 679 |
"USR_LED_4_CTRL", |
| 680 |
"USB_HUB_RESET_N_PM", |
| 681 |
"USB_SW_SEL_PM"; |
| 682 |
|
| 683 |
usb_hub_reset_pm: usb-hub-reset-pm-state { |
| 684 |
pins = "gpio3"; |
| 685 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 686 |
|
| 687 |
input-disable; |
| 688 |
output-high; |
| 689 |
}; |
| 690 |
|
| 691 |
usb_hub_reset_pm_device: usb-hub-reset-pm-device-state { |
| 692 |
pins = "gpio3"; |
| 693 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 694 |
|
| 695 |
output-low; |
| 696 |
}; |
| 697 |
|
| 698 |
usb_sw_sel_pm: usb-sw-sel-pm-state { |
| 699 |
pins = "gpio4"; |
| 700 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 701 |
|
| 702 |
power-source = <PM8916_GPIO_VPH>; |
| 703 |
input-disable; |
| 704 |
output-high; |
| 705 |
}; |
| 706 |
|
| 707 |
usb_sw_sel_pm_device: usb-sw-sel-pm-device-state { |
| 708 |
pins = "gpio4"; |
| 709 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 710 |
|
| 711 |
power-source = <PM8916_GPIO_VPH>; |
| 712 |
input-disable; |
| 713 |
output-low; |
| 714 |
}; |
| 715 |
|
| 716 |
pm8916_gpios_leds: pm8916-gpios-leds-state { |
| 717 |
pins = "gpio1", "gpio2"; |
| 718 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 719 |
|
| 720 |
output-low; |
| 721 |
}; |
| 722 |
}; |
| 723 |
|
| 724 |
&pm8916_mpps { |
| 725 |
gpio-line-names = |
| 726 |
"VDD_PX_BIAS", |
| 727 |
"WLAN_LED_CTRL", |
| 728 |
"BT_LED_CTRL", |
| 729 |
"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ |
| 730 |
|
| 731 |
pinctrl-names = "default"; |
| 732 |
pinctrl-0 = <&ls_exp_gpio_f>; |
| 733 |
|
| 734 |
ls_exp_gpio_f: pm8916-mpp4-state { |
| 735 |
pins = "mpp4"; |
| 736 |
function = "digital"; |
| 737 |
|
| 738 |
output-low; |
| 739 |
power-source = <PM8916_MPP_L5>; /* 1.8V */ |
| 740 |
}; |
| 741 |
|
| 742 |
pm8916_mpps_leds: pm8916-mpps-state { |
| 743 |
pins = "mpp2", "mpp3"; |
| 744 |
function = "digital"; |
| 745 |
|
| 746 |
output-low; |
| 747 |
}; |
| 748 |
}; |