Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/apq8016-sbc-d3-camera-mezzanine.dtso

raw
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (c) 2015, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2023, Linaro Ltd.
5 */
6
7 /dts-v1/;
8 /plugin/;
9
10 #include <dt-bindings/clock/qcom,gcc-msm8916.h>
11 #include <dt-bindings/gpio/gpio.h>
12
13 &{/} {
14 camera_vdddo_1v8: regulator-camera-vdddo {
15 compatible = "regulator-fixed";
16 regulator-name = "camera_vdddo";
17 regulator-min-microvolt = <1800000>;
18 regulator-max-microvolt = <1800000>;
19 regulator-always-on;
20 };
21
22 camera_vdda_2v8: regulator-camera-vdda {
23 compatible = "regulator-fixed";
24 regulator-name = "camera_vdda";
25 regulator-min-microvolt = <2800000>;
26 regulator-max-microvolt = <2800000>;
27 regulator-always-on;
28 };
29
30 camera_vddd_1v5: regulator-camera-vddd {
31 compatible = "regulator-fixed";
32 regulator-name = "camera_vddd";
33 regulator-min-microvolt = <1500000>;
34 regulator-max-microvolt = <1500000>;
35 regulator-always-on;
36 };
37 };
38
39 &camss {
40 status = "okay";
41
42 ports {
43 #address-cells = <1>;
44 #size-cells = <0>;
45
46 port@0 {
47 reg = <0>;
48 csiphy0_ep: endpoint {
49 data-lanes = <0 2>;
50 remote-endpoint = <&ov5640_ep>;
51 };
52 };
53 };
54 };
55
56 &cci {
57 status = "okay";
58 };
59
60 &cci_i2c0 {
61 #address-cells = <1>;
62 #size-cells = <0>;
63
64 camera@3b {
65 compatible = "ovti,ov5640";
66 reg = <0x3b>;
67
68 powerdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
69 reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
70 pinctrl-names = "default";
71 pinctrl-0 = <&camera_rear_default>;
72
73 clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
74 clock-names = "xclk";
75 assigned-clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
76 assigned-clock-rates = <23880000>;
77
78 DOVDD-supply = <&camera_vdddo_1v8>;
79 AVDD-supply = <&camera_vdda_2v8>;
80 DVDD-supply = <&camera_vddd_1v5>;
81
82 port {
83 ov5640_ep: endpoint {
84 data-lanes = <1 2>;
85 remote-endpoint = <&csiphy0_ep>;
86 };
87 };
88 };
89 };