Debian Codegraph @

scripts/dtc/include-prefixes/arm64/mediatek/pumpkin-common.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (c) 2019 BayLibre, SAS.
4 * Author: Fabien Parent <[email protected]>
5 */
6
7 #include <dt-bindings/gpio/gpio.h>
8
9 / {
10 aliases {
11 serial0 = &uart0;
12 ethernet0 = &ethernet;
13 };
14
15 chosen {
16 stdout-path = "serial0:921600n8";
17 };
18
19 firmware {
20 optee: optee {
21 compatible = "linaro,optee-tz";
22 method = "smc";
23 };
24 };
25
26 gpio-keys {
27 compatible = "gpio-keys";
28 pinctrl-names = "default";
29 pinctrl-0 = <&gpio_keys_default>;
30
31 key-volume-up {
32 gpios = <&pio 42 GPIO_ACTIVE_LOW>;
33 label = "volume_up";
34 linux,code = <115>;
35 wakeup-source;
36 debounce-interval = <15>;
37 };
38
39 key-volume-down {
40 gpios = <&pio 43 GPIO_ACTIVE_LOW>;
41 label = "volume_down";
42 linux,code = <114>;
43 wakeup-source;
44 debounce-interval = <15>;
45 };
46 };
47 };
48
49 &i2c0 {
50 pinctrl-names = "default";
51 pinctrl-0 = <&i2c0_pins_a>;
52 status = "okay";
53
54 tca6416: gpio@20 {
55 compatible = "ti,tca6416";
56 reg = <0x20>;
57 reset-gpios = <&pio 65 GPIO_ACTIVE_LOW>;
58 pinctrl-names = "default";
59 pinctrl-0 = <&tca6416_pins>;
60
61 gpio-controller;
62 #gpio-cells = <2>;
63
64 eint20-mux-sel0-hog {
65 gpio-hog;
66 gpios = <0 0>;
67 input;
68 line-name = "eint20_mux_sel0";
69 };
70
71 expcon-mux-sel1-hog {
72 gpio-hog;
73 gpios = <1 0>;
74 input;
75 line-name = "expcon_mux_sel1";
76 };
77
78 mrg-di-mux-sel2-hog {
79 gpio-hog;
80 gpios = <2 0>;
81 input;
82 line-name = "mrg_di_mux_sel2";
83 };
84
85 sd-sdio-mux-sel3-hog {
86 gpio-hog;
87 gpios = <3 0>;
88 input;
89 line-name = "sd_sdio_mux_sel3";
90 };
91
92 sd-sdio-mux-ctrl7-hog {
93 gpio-hog;
94 gpios = <7 0>;
95 output-low;
96 line-name = "sd_sdio_mux_ctrl7";
97 };
98
99 hw-id0-hog {
100 gpio-hog;
101 gpios = <8 0>;
102 input;
103 line-name = "hw_id0";
104 };
105
106 hw-id1-hog {
107 gpio-hog;
108 gpios = <9 0>;
109 input;
110 line-name = "hw_id1";
111 };
112
113 hw-id2-hog {
114 gpio-hog;
115 gpios = <10 0>;
116 input;
117 line-name = "hw_id2";
118 };
119
120 fg-int-n-hog {
121 gpio-hog;
122 gpios = <11 0>;
123 input;
124 line-name = "fg_int_n";
125 };
126
127 usba-pwr-en-hog {
128 gpio-hog;
129 gpios = <12 0>;
130 output-high;
131 line-name = "usba_pwr_en";
132 };
133
134 wifi-3v3-pg-hog {
135 gpio-hog;
136 gpios = <13 0>;
137 input;
138 line-name = "wifi_3v3_pg";
139 };
140
141 cam-rst-hog {
142 gpio-hog;
143 gpios = <14 0>;
144 output-low;
145 line-name = "cam_rst";
146 };
147
148 cam-pwdn-hog {
149 gpio-hog;
150 gpios = <15 0>;
151 output-low;
152 line-name = "cam_pwdn";
153 };
154 };
155 };
156
157 &i2c2 {
158 pinctrl-names = "default";
159 pinctrl-0 = <&i2c2_pins_a>;
160 status = "okay";
161 };
162
163 &uart0 {
164 status = "okay";
165 };
166
167 &ethernet {
168 pinctrl-names = "default";
169 pinctrl-0 = <&ethernet_pins_default>;
170 phy-handle = <&eth_phy>;
171 phy-mode = "rmii";
172 mac-address = [00 00 00 00 00 00];
173 status = "okay";
174
175 mdio {
176 #address-cells = <1>;
177 #size-cells = <0>;
178
179 eth_phy: ethernet-phy@0 {
180 reg = <0>;
181 };
182 };
183 };
184
185 &usb0 {
186 status = "okay";
187 dr_mode = "peripheral";
188 usb-role-switch;
189
190 usb_con: connector {
191 compatible = "usb-c-connector";
192 label = "USB-C";
193 };
194 };
195
196 &usb_phy {
197 status = "okay";
198 };
199
200 &pio {
201 gpio_keys_default: gpio-keys-pins {
202 pins-cmd-dat {
203 pinmux = <MT8516_PIN_42_KPCOL0__FUNC_GPIO42>,
204 <MT8516_PIN_43_KPCOL1__FUNC_GPIO43>;
205 bias-pull-up;
206 input-enable;
207 };
208 };
209
210 i2c0_pins_a: i2c0-pins {
211 pins1 {
212 pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
213 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
214 bias-disable;
215 };
216 };
217
218 i2c2_pins_a: i2c2-pins {
219 pins1 {
220 pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
221 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
222 bias-disable;
223 };
224 };
225
226 tca6416_pins: tca6416-pins {
227 pins-mux-rstn {
228 pinmux = <MT8516_PIN_65_UTXD1__FUNC_GPIO65>;
229 output-high;
230 };
231
232 pins-mux-intn {
233 pinmux = <MT8516_PIN_64_URXD1__FUNC_GPIO64>;
234 input-enable;
235 bias-pull-up;
236 };
237 };
238
239 ethernet_pins_default: ethernet-pins {
240 pins-eth {
241 pinmux = <MT8516_PIN_0_EINT0__FUNC_EXT_TXD0>,
242 <MT8516_PIN_1_EINT1__FUNC_EXT_TXD1>,
243 <MT8516_PIN_5_EINT5__FUNC_EXT_RXER>,
244 <MT8516_PIN_6_EINT6__FUNC_EXT_RXC>,
245 <MT8516_PIN_7_EINT7__FUNC_EXT_RXDV>,
246 <MT8516_PIN_8_EINT8__FUNC_EXT_RXD0>,
247 <MT8516_PIN_9_EINT9__FUNC_EXT_RXD1>,
248 <MT8516_PIN_12_EINT12__FUNC_EXT_TXEN>,
249 <MT8516_PIN_38_MRG_DI__FUNC_EXT_MDIO>,
250 <MT8516_PIN_39_MRG_DO__FUNC_EXT_MDC>;
251 };
252 };
253 };