Debian Codegraph @

scripts/dtc/include-prefixes/arm64/mediatek/mt8390-grinn-genio-som.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
2 /*
3 * Copyright (C) 2025 Grinn sp. z o.o.
4 * Author: Mateusz Koza <[email protected]>
5 */
6
7 #include "mt6359.dtsi"
8 #include <dt-bindings/input/input.h>
9
10 / {
11 aliases {
12 i2c1 = &i2c1;
13 mmc0 = &mmc0;
14 };
15 };
16
17 &i2c1 {
18 pinctrl-names = "default";
19 pinctrl-0 = <&i2c1_pins>;
20 clock-frequency = <400000>;
21 status = "okay";
22 };
23
24 &mfg0 {
25 domain-supply = <&mt6359_vproc2_buck_reg>;
26 };
27
28 &mfg1 {
29 domain-supply = <&mt6359_vsram_others_ldo_reg>;
30 };
31
32 &mmc0 {
33 status = "okay";
34 pinctrl-names = "default", "state_uhs";
35 pinctrl-0 = <&mmc0_default_pins>;
36 pinctrl-1 = <&mmc0_uhs_pins>;
37 bus-width = <8>;
38 max-frequency = <200000000>;
39 cap-mmc-highspeed;
40 mmc-hs200-1_8v;
41 mmc-hs400-1_8v;
42 supports-cqe;
43 cap-mmc-hw-reset;
44 no-sdio;
45 no-sd;
46 hs400-ds-delay = <0x1481b>;
47 vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
48 vqmmc-supply = <&mt6359_vufs_ldo_reg>;
49 non-removable;
50 };
51
52 &mt6359_vbbck_ldo_reg {
53 regulator-always-on;
54 };
55
56 &mt6359_vcn18_ldo_reg {
57 regulator-name = "vcn18_pmu";
58 regulator-always-on;
59 };
60
61 &mt6359_vcn33_2_bt_ldo_reg {
62 regulator-name = "vcn33_2_pmu";
63 regulator-always-on;
64 };
65
66 &mt6359_vcore_buck_reg {
67 regulator-name = "dvdd_proc_l";
68 regulator-always-on;
69 };
70
71 &mt6359_vgpu11_buck_reg {
72 regulator-name = "dvdd_core";
73 regulator-always-on;
74 };
75
76 &mt6359_vpa_buck_reg {
77 regulator-name = "vpa_pmu";
78 regulator-max-microvolt = <3100000>;
79 };
80
81 &mt6359_vproc2_buck_reg {
82 /* The name "vgpu" is required by mtk-regulator-coupler */
83 regulator-name = "vgpu";
84 regulator-min-microvolt = <550000>;
85 regulator-max-microvolt = <800000>;
86 regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
87 regulator-coupled-max-spread = <6250>;
88 };
89
90 &mt6359_vpu_buck_reg {
91 regulator-name = "dvdd_adsp";
92 regulator-always-on;
93 };
94
95 &mt6359_vrf12_ldo_reg {
96 regulator-name = "va12_abb2_pmu";
97 regulator-always-on;
98 };
99
100 &mt6359_vsim1_ldo_reg {
101 regulator-name = "vsim1_pmu";
102 regulator-enable-ramp-delay = <480>;
103 };
104
105 &mt6359_vsram_others_ldo_reg {
106 /* The name "vsram_gpu" is required by mtk-regulator-coupler */
107 regulator-name = "vsram_gpu";
108 regulator-min-microvolt = <750000>;
109 regulator-max-microvolt = <800000>;
110 regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
111 regulator-coupled-max-spread = <6250>;
112 };
113
114 &mt6359_vufs_ldo_reg {
115 regulator-name = "vufs18_pmu";
116 regulator-always-on;
117 };
118
119 &pio {
120
121 i2c1_pins: i2c1-pins {
122 pins {
123 pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
124 <PINMUX_GPIO57__FUNC_B1_SCL1>;
125 bias-pull-up = <MTK_PULL_SET_RSEL_011>;
126 drive-strength-microamp = <1000>;
127 };
128 };
129
130 mmc0_default_pins: mmc0-default-pins {
131 pins-clk {
132 pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
133 drive-strength = <6>;
134 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
135 };
136
137 pins-cmd-dat {
138 pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
139 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
140 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
141 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
142 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
143 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
144 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
145 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
146 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
147 input-enable;
148 drive-strength = <6>;
149 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
150 };
151
152 pins-rst {
153 pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
154 drive-strength = <6>;
155 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
156 };
157 };
158
159 mmc0_uhs_pins: mmc0-uhs-pins {
160 pins-clk {
161 pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
162 drive-strength = <8>;
163 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
164 };
165
166 pins-cmd-dat {
167 pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
168 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
169 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
170 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
171 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
172 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
173 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
174 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
175 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
176 input-enable;
177 drive-strength = <8>;
178 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
179 };
180
181 pins-ds {
182 pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
183 drive-strength = <8>;
184 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
185 };
186
187 pins-rst {
188 pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
189 drive-strength = <8>;
190 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
191 };
192 };
193 };
194
195 &pmic {
196 interrupt-parent = <&pio>;
197 interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
198 interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
199
200 keys {
201 compatible = "mediatek,mt6359-keys";
202 mediatek,long-press-mode = <1>;
203 power-off-time-sec = <0>;
204
205 power-key {
206 linux,keycodes = <KEY_POWER>;
207 wakeup-source;
208 };
209 };
210 };