Debian Codegraph @

scripts/dtc/include-prefixes/arm64/mediatek/mt8390-grinn-genio-sbc.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
2 /*
3 * Copyright (C) 2025 Grinn sp. z o.o.
4 * Author: Mateusz Koza <[email protected]>
5 */
6
7 #include <dt-bindings/gpio/gpio.h>
8
9 / {
10 chassis-type = "embedded";
11
12 aliases {
13 ethernet0 = &eth;
14 i2c0 = &i2c0;
15 i2c2 = &i2c2;
16 i2c3 = &i2c3;
17 i2c5 = &i2c5;
18 i2c6 = &i2c6;
19 serial0 = &uart0;
20 };
21
22 chosen {
23 stdout-path = "serial0:921600n8";
24 };
25
26 firmware {
27 optee {
28 compatible = "linaro,optee-tz";
29 method = "smc";
30 };
31 };
32
33 reserved-memory {
34 #address-cells = <2>;
35 #size-cells = <2>;
36 ranges;
37
38 /*
39 * 12 MiB reserved for OP-TEE (BL32)
40 * +-----------------------+ 0x43e0_0000
41 * | SHMEM 2MiB |
42 * +-----------------------+ 0x43c0_0000
43 * | | TA_RAM 8MiB |
44 * + TZDRAM +--------------+ 0x4340_0000
45 * | | TEE_RAM 2MiB |
46 * +-----------------------+ 0x4320_0000
47 */
48 optee_reserved: optee@43200000 {
49 no-map;
50 reg = <0 0x43200000 0 0x00c00000>;
51 };
52
53 scp_mem: memory@50000000 {
54 compatible = "shared-dma-pool";
55 reg = <0 0x50000000 0 0x2900000>;
56 no-map;
57 };
58
59 /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
60 bl31_secmon_reserved: memory@54600000 {
61 no-map;
62 reg = <0 0x54600000 0x0 0x200000>;
63 };
64
65 apu_mem: memory@55000000 {
66 compatible = "shared-dma-pool";
67 reg = <0 0x55000000 0 0x1400000>; /* 20 MB */
68 };
69
70 vpu_mem: memory@57000000 {
71 compatible = "shared-dma-pool";
72 reg = <0 0x57000000 0 0x1400000>; /* 20 MB */
73 };
74
75 adsp_mem: memory@60000000 {
76 compatible = "shared-dma-pool";
77 reg = <0 0x60000000 0 0xf00000>;
78 no-map;
79 };
80
81 afe_dma_mem: memory@60f00000 {
82 compatible = "shared-dma-pool";
83 reg = <0 0x60f00000 0 0x100000>;
84 no-map;
85 };
86
87 adsp_dma_mem: memory@61000000 {
88 compatible = "shared-dma-pool";
89 reg = <0 0x61000000 0 0x100000>;
90 no-map;
91 };
92 };
93
94 reg_sbc_vsys: regulator-vsys {
95 compatible = "regulator-fixed";
96 regulator-name = "vsys";
97 regulator-always-on;
98 regulator-boot-on;
99 };
100
101 reg_fixed_5v: regulator-0 {
102 compatible = "regulator-fixed";
103 regulator-name = "fixed-5v0";
104 regulator-min-microvolt = <5000000>;
105 regulator-max-microvolt = <5000000>;
106 enable-active-high;
107 regulator-always-on;
108 vin-supply = <&reg_sbc_vsys>;
109 };
110
111 reg_fixed_4v2: regulator-1 {
112 compatible = "regulator-fixed";
113 regulator-name = "fixed-4v2";
114 regulator-min-microvolt = <4200000>;
115 regulator-max-microvolt = <4200000>;
116 enable-active-high;
117 regulator-always-on;
118 vin-supply = <&reg_sbc_vsys>;
119 };
120
121 reg_fixed_3v3: regulator-2 {
122 compatible = "regulator-fixed";
123 regulator-name = "fixed-3v3";
124 regulator-min-microvolt = <3300000>;
125 regulator-max-microvolt = <3300000>;
126 enable-active-high;
127 regulator-always-on;
128 vin-supply = <&reg_sbc_vsys>;
129 };
130 };
131
132 &pio {
133 gpio-line-names =
134 /* 0 - 4 */ "RPI_GPIO0", "RPI_GPIO1", "", "", "RPI_GPIO4",
135 /* 5 - 9 */ "", "RPI_GPIO6", "", "", "RPI_GPIO9",
136 /* 10 - 14 */ "RPI_GPIO10", "RPI_GPIO11", "", "", "",
137 /* 15 - 19 */ "", "", "", "", "",
138 /* 20 - 24 */ "", "RPI_GPIO21", "", "RPI_GPIO23", "",
139 /* 25 - 29 */ "", "", "", "", "",
140 /* 30 - 34 */ "RPI_GPIO30", "", "", "", "",
141 /* 35 - 39 */ "RPI_GPIO35", "RPI_GPIO36", "", "", "",
142 /* 40 - 44 */ "", "", "", "", "",
143 /* 45 - 49 */ "", "", "", "", "",
144 /* 50 - 54 */ "", "", "", "", "",
145 /* 55 - 59 */ "RPI_GPIO55", "RPI_GPIO56", "", "", "RPI_GPIO59",
146 /* 60 - 64 */ "RPI_GPIO60", "", "", "", "",
147 /* 65 - 69 */ "", "", "", "", "RPI_GPIO69",
148 /* 70 - 74 */ "", "", "RPI_GPIO72", "RPI_GPIO73", "RPI_GPIO74",
149 /* 75 - 79 */ "", "", "", "", "RPI_GPIO79",
150 /* 80 - 84 */ "RPI_GPIO80", "RPI_GPIO81", "RPI_GPIO82", "", "",
151 /* 85 - 89 */ "", "", "", "", "",
152 /* 90 - 94 */ "", "", "", "", "",
153 /* 95 - 99 */ "", "", "", "", "",
154 /*100 - 104 */ "", "", "", "", "",
155 /*105 - 109 */ "", "", "", "", "",
156 /*110 - 114 */ "", "", "", "", "",
157 /*115 - 119 */ "", "", "", "", "",
158 /*120 - 124 */ "", "RPI_GPIO121", "RPI_GPIO122", "RPI_GPIO123", "RPI_GPIO124";
159
160 i2c0_pins: i2c0-pins {
161 pins {
162 pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
163 <PINMUX_GPIO55__FUNC_B1_SCL0>;
164 bias-pull-up = <MTK_PULL_SET_RSEL_011>;
165 drive-strength-microamp = <1000>;
166 };
167 };
168
169 i2c2_pins: i2c2-pins {
170 pins {
171 pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
172 <PINMUX_GPIO59__FUNC_B1_SCL2>;
173 bias-pull-up = <MTK_PULL_SET_RSEL_011>;
174 drive-strength-microamp = <1000>;
175 };
176 };
177
178 i2c3_pins: i2c3-pins {
179 pins {
180 pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
181 <PINMUX_GPIO61__FUNC_B1_SCL3>;
182 bias-pull-up = <MTK_PULL_SET_RSEL_011>;
183 drive-strength-microamp = <1000>;
184 };
185 };
186
187 i2c5_pins: i2c5-pins {
188 pins {
189 pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
190 <PINMUX_GPIO65__FUNC_B1_SCL5>;
191 bias-pull-up = <MTK_PULL_SET_RSEL_011>;
192 drive-strength-microamp = <1000>;
193 };
194 };
195
196 i2c6_pins: i2c6-pins {
197 pins {
198 pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
199 <PINMUX_GPIO67__FUNC_B1_SCL6>;
200 bias-pull-up = <MTK_PULL_SET_RSEL_011>;
201 drive-strength-microamp = <1000>;
202 };
203 };
204
205 uart0_pins: uart0-pins {
206 pins {
207 pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
208 <PINMUX_GPIO32__FUNC_I1_URXD0>;
209 bias-pull-up;
210 };
211 };
212
213 uart1_pins: uart1-pins {
214 pins {
215 pinmux = <PINMUX_GPIO86__FUNC_O_UTXD1>,
216 <PINMUX_GPIO87__FUNC_I1_URXD1>;
217 bias-pull-up;
218 };
219 };
220
221 uart2_pins: uart2-pins {
222 pins {
223 pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>,
224 <PINMUX_GPIO36__FUNC_I1_URXD2>;
225 bias-pull-up;
226 };
227 };
228
229 pcie_pins_default: pcie-default {
230 mux {
231 pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
232 <PINMUX_GPIO48__FUNC_O_PERSTN>,
233 <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
234 bias-pull-up;
235 };
236 };
237
238 eth_default_pins: eth-default-pins {
239 pins-cc {
240 pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>,
241 <PINMUX_GPIO140__FUNC_I0_GBE_RXC>,
242 <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>,
243 <PINMUX_GPIO142__FUNC_O_GBE_TXEN>;
244 drive-strength = <8>;
245 };
246
247 pins-mdio {
248 pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>,
249 <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>;
250 drive-strength = <8>;
251 input-enable;
252 };
253
254 pins-power {
255 pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>,
256 <PINMUX_GPIO146__FUNC_B_GPIO146>;
257 output-high;
258 };
259
260 pins-rxd {
261 pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>,
262 <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>,
263 <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>,
264 <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>;
265 drive-strength = <8>;
266 };
267
268 pins-txd {
269 pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>,
270 <PINMUX_GPIO132__FUNC_O_GBE_TXD2>,
271 <PINMUX_GPIO133__FUNC_O_GBE_TXD1>,
272 <PINMUX_GPIO134__FUNC_O_GBE_TXD0>;
273 drive-strength = <8>;
274 };
275 };
276
277 eth_sleep_pins: eth-sleep-pins {
278 pins-cc {
279 pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>,
280 <PINMUX_GPIO140__FUNC_B_GPIO140>,
281 <PINMUX_GPIO141__FUNC_B_GPIO141>,
282 <PINMUX_GPIO142__FUNC_B_GPIO142>;
283 };
284
285 pins-mdio {
286 pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>,
287 <PINMUX_GPIO144__FUNC_B_GPIO144>;
288 input-disable;
289 bias-disable;
290 };
291
292 pins-rxd {
293 pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>,
294 <PINMUX_GPIO136__FUNC_B_GPIO136>,
295 <PINMUX_GPIO137__FUNC_B_GPIO137>,
296 <PINMUX_GPIO138__FUNC_B_GPIO138>;
297 };
298
299 pins-txd {
300 pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>,
301 <PINMUX_GPIO132__FUNC_B_GPIO132>,
302 <PINMUX_GPIO133__FUNC_B_GPIO133>,
303 <PINMUX_GPIO134__FUNC_B_GPIO134>;
304 };
305 };
306
307 spi2_pins: spi2-pins {
308 pins-spi {
309 pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
310 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
311 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
312 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
313 bias-disable;
314 };
315 };
316
317 audio_default_pins: audio-default-pins {
318 pins-cmd-dat {
319 pinmux = <PINMUX_GPIO121__FUNC_B0_PCM_CLK>,
320 <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>,
321 <PINMUX_GPIO123__FUNC_O_PCM_DO>,
322 <PINMUX_GPIO124__FUNC_I0_PCM_DI>;
323 };
324 };
325
326 usb_default_pins: usb-default-pins {
327 pins-valid {
328 pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>;
329 input-enable;
330 };
331 };
332 };
333
334 &eth {
335 phy-mode = "rgmii-id";
336 phy-handle = <&ethernet_phy0>;
337 pinctrl-names = "default", "sleep";
338 pinctrl-0 = <&eth_default_pins>;
339 pinctrl-1 = <&eth_sleep_pins>;
340 mediatek,mac-wol;
341 mediatek,tx-delay-ps = <30>;
342 snps,reset-active-low;
343 snps,reset-delays-us = <0 11000 200000>;
344 snps,reset-gpio = <&pio 147 GPIO_ACTIVE_LOW>;
345 status = "okay";
346 };
347
348 &eth_mdio {
349 ethernet_phy0: ethernet-phy@3 {
350 compatible = "ethernet-phy-ieee802.3-c22";
351 reg = <3>;
352 interrupts-extended = <&pio 148 IRQ_TYPE_LEVEL_LOW>;
353 eee-broken-1000t;
354 };
355 };
356
357 &i2c0 {
358 pinctrl-names = "default";
359 pinctrl-0 = <&i2c0_pins>;
360 clock-frequency = <400000>;
361 status = "okay";
362 };
363
364 &i2c2 {
365 pinctrl-names = "default";
366 pinctrl-0 = <&i2c2_pins>;
367 clock-frequency = <400000>;
368 status = "okay";
369 };
370
371 &i2c3 {
372 pinctrl-names = "default";
373 pinctrl-0 = <&i2c3_pins>;
374 clock-frequency = <400000>;
375 status = "okay";
376 };
377
378 &i2c5 {
379 pinctrl-names = "default";
380 pinctrl-0 = <&i2c5_pins>;
381 clock-frequency = <400000>;
382 status = "okay";
383 };
384
385 &i2c6 {
386 pinctrl-names = "default";
387 pinctrl-0 = <&i2c6_pins>;
388 clock-frequency = <400000>;
389 status = "okay";
390 };
391
392 &uart0 {
393 pinctrl-names = "default";
394 pinctrl-0 = <&uart0_pins>;
395 status = "okay";
396 };
397
398 &uart1 {
399 pinctrl-names = "default";
400 pinctrl-0 = <&uart1_pins>;
401 status = "okay";
402 };
403
404 &uart2 {
405 pinctrl-names = "default";
406 pinctrl-0 = <&uart2_pins>;
407 status = "okay";
408 };
409
410 &pcie {
411 pinctrl-names = "default";
412 pinctrl-0 = <&pcie_pins_default>;
413 status = "okay";
414 };
415
416 &pciephy {
417 status = "okay";
418 };
419
420 &spi2 {
421 pinctrl-names = "default";
422 pinctrl-0 = <&spi2_pins>;
423 mediatek,pad-select = <0>;
424 #address-cells = <1>;
425 #size-cells = <0>;
426 status = "okay";
427 };
428
429 &u3phy0 {
430 status = "okay";
431 };
432
433 &u3phy1 {
434 status = "okay";
435 };
436
437 &u3phy2 {
438 status = "okay";
439 };
440
441 &xhci1 {
442 #address-cells = <1>;
443 #size-cells = <0>;
444 vusb33-supply = <&mt6359_vusb_ldo_reg>;
445 status = "okay";
446
447 hub_2_0: hub@1 {
448 compatible = "usb451,8027";
449 reg = <1>;
450 peer-hub = <&hub_3_0>;
451 reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
452 vdd-supply = <&reg_fixed_3v3>;
453 };
454
455 hub_3_0: hub@2 {
456 compatible = "usb451,8025";
457 reg = <2>;
458 peer-hub = <&hub_2_0>;
459 reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
460 vdd-supply = <&reg_fixed_3v3>;
461 };
462 };
463
464 &xhci2 {
465 #address-cells = <1>;
466 #size-cells = <0>;
467 vusb33-supply = <&mt6359_vusb_ldo_reg>;
468 status = "okay";
469
470 hub@1 {
471 compatible = "microchip,usb2513bi";
472 reg = <1>;
473 vdd-supply = <&reg_fixed_3v3>;
474 };
475 };
476
477 &ssusb0 {
478 dr_mode = "peripheral";
479 pinctrl-names = "default";
480 pinctrl-0 = <&usb_default_pins>;
481 vusb33-supply = <&mt6359_vusb_ldo_reg>;
482 status = "okay";
483 };
484
485 &ssusb1 {
486 dr_mode = "host";
487 maximum-speed = "super-speed";
488 vusb33-supply = <&mt6359_vusb_ldo_reg>;
489 status = "okay";
490 };
491
492 &ssusb2 {
493 dr_mode = "host";
494 maximum-speed = "high-speed";
495 vusb33-supply = <&mt6359_vusb_ldo_reg>;
496 status = "okay";
497 };
498
499 &scp_cluster {
500 status = "okay";
501 };
502
503 &scp_c0 {
504 memory-region = <&scp_mem>;
505 status = "okay";
506 };
507
508 &gpu {
509 mali-supply = <&mt6359_vproc2_buck_reg>;
510 status = "okay";
511 };
512
513 &adsp {
514 memory-region = <&adsp_dma_mem>, <&adsp_mem>;
515 status = "okay";
516 };
517
518 &afe {
519 memory-region = <&afe_dma_mem>;
520 status = "okay";
521 };
522
523 &sound {
524 compatible = "mediatek,mt8390-mt6359-evk", "mediatek,mt8188-mt6359-evb";
525 model = "mt8390-evk";
526 pinctrl-names = "default";
527 pinctrl-0 = <&audio_default_pins>;
528 audio-routing =
529 "Headphone", "Headphone L",
530 "Headphone", "Headphone R",
531 "AP DMIC", "AUDGLB",
532 "AP DMIC", "MIC_BIAS_0",
533 "AP DMIC", "MIC_BIAS_2",
534 "DMIC_INPUT", "AP DMIC";
535
536 mediatek,adsp = <&adsp>;
537 status = "okay";
538 };