Debian Codegraph @

scripts/dtc/include-prefixes/arm64/mediatek/mt8188-geralt.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
2 /*
3 * Copyright (C) 2022 MediaTek Inc.
4 */
5 /dts-v1/;
6 #include <dt-bindings/gpio/gpio.h>
7 #include "mt8188.dtsi"
8 #include "mt6359.dtsi"
9
10 / {
11 aliases {
12 dsi0 = &disp_dsi0;
13 i2c0 = &i2c0;
14 i2c1 = &i2c1;
15 i2c2 = &i2c2;
16 i2c3 = &i2c3;
17 i2c4 = &i2c4;
18 i2c5 = &i2c5;
19 i2c6 = &i2c6;
20 mmc0 = &mmc0;
21 serial0 = &uart0;
22 };
23
24 backlight_lcd0: backlight-lcd0 {
25 compatible = "pwm-backlight";
26 brightness-levels = <0 1023>;
27 default-brightness-level = <576>;
28 enable-gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
29 num-interpolated-steps = <1023>;
30 power-supply = <&ppvar_sys>;
31 pwms = <&disp_pwm0 0 500000>;
32 };
33
34 chosen {
35 stdout-path = "serial0:115200n8";
36 };
37
38 dmic-codec {
39 compatible = "dmic-codec";
40 num-channels = <2>;
41 wakeup-delay-ms = <100>;
42 };
43
44 memory@40000000 {
45 device_type = "memory";
46 /* The size will be filled in by the bootloader */
47 reg = <0 0x40000000 0 0>;
48 };
49
50 /* system wide LDO 1.8V power rail */
51 pp1800_ldo_z1: regulator-pp1800-ldo-z1 {
52 compatible = "regulator-fixed";
53 regulator-name = "pp1800_ldo_z1";
54 /* controlled by PP3300_Z1 */
55 regulator-always-on;
56 regulator-boot-on;
57 regulator-min-microvolt = <1800000>;
58 regulator-max-microvolt = <1800000>;
59 vin-supply = <&pp3300_z1>;
60 };
61
62 /* separately switched 3.3V power rail */
63 pp3300_s3: regulator-pp3300-s3 {
64 compatible = "regulator-fixed";
65 regulator-name = "pp3300_s3";
66 /* controlled by PMIC */
67 regulator-always-on;
68 regulator-boot-on;
69 regulator-min-microvolt = <3300000>;
70 regulator-max-microvolt = <3300000>;
71 vin-supply = <&pp3300_z1>;
72 };
73
74 /* system wide 3.3V power rail */
75 pp3300_z1: regulator-pp3300-z1 {
76 compatible = "regulator-fixed";
77 regulator-name = "pp3300_z1";
78 /* controlled by PP3300_LDO_Z5 & EN_PWR_Z1 */
79 regulator-always-on;
80 regulator-boot-on;
81 regulator-min-microvolt = <3300000>;
82 regulator-max-microvolt = <3300000>;
83 vin-supply = <&ppvar_sys>;
84 };
85
86 pp3300_wlan: regulator-pp3300-wlan {
87 compatible = "regulator-fixed";
88 regulator-name = "pp3300_wlan";
89 regulator-always-on;
90 regulator-min-microvolt = <3300000>;
91 regulator-max-microvolt = <3300000>;
92 enable-active-high;
93 gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
94 pinctrl-0 = <&wlan_en>;
95 pinctrl-names = "default";
96 vin-supply = <&pp3300_z1>;
97 };
98
99 /* system wide 4.2V power rail */
100 pp4200_s5: regulator-pp4200-s5 {
101 compatible = "regulator-fixed";
102 regulator-name = "pp4200_s5";
103 /* controlled by EC */
104 regulator-always-on;
105 regulator-boot-on;
106 regulator-min-microvolt = <4200000>;
107 regulator-max-microvolt = <4200000>;
108 vin-supply = <&ppvar_sys>;
109 };
110
111 /* system wide 5.0V power rail */
112 pp5000_z1: regulator-pp5000-z1 {
113 compatible = "regulator-fixed";
114 regulator-name = "pp5000_z1";
115 /* controlled by EC */
116 regulator-always-on;
117 regulator-boot-on;
118 regulator-min-microvolt = <5000000>;
119 regulator-max-microvolt = <5000000>;
120 vin-supply = <&ppvar_sys>;
121 };
122
123 pp5000_usb_vbus: regulator-pp5000-usb-vbus {
124 compatible = "regulator-fixed";
125 regulator-name = "pp5000_usb_vbus";
126 regulator-min-microvolt = <5000000>;
127 regulator-max-microvolt = <5000000>;
128 enable-active-high;
129 gpio = <&pio 150 GPIO_ACTIVE_HIGH>;
130 vin-supply = <&pp5000_z1>;
131 };
132
133 /* system wide semi-regulated power rail from battery or USB */
134 ppvar_sys: regulator-ppvar-sys {
135 compatible = "regulator-fixed";
136 regulator-name = "ppvar_sys";
137 regulator-always-on;
138 regulator-boot-on;
139 };
140
141 ppvar_mipi_disp_avdd: regulator-ppvar-mipi-disp-avdd {
142 compatible = "regulator-fixed";
143 regulator-name = "ppvar_mipi_disp_avdd";
144 enable-active-high;
145 gpio = <&pio 3 GPIO_ACTIVE_HIGH>;
146 pinctrl-names = "default";
147 pinctrl-0 = <&mipi_disp_avdd_en>;
148 vin-supply = <&pp5000_z1>;
149 };
150
151 ppvar_mipi_disp_avee: regulator-ppvar-mipi-disp-avee {
152 compatible = "regulator-fixed";
153 regulator-name = "ppvar_mipi_disp_avee";
154 regulator-enable-ramp-delay = <10000>;
155 enable-active-high;
156 gpio = <&pio 4 GPIO_ACTIVE_HIGH>;
157 pinctrl-names = "default";
158 pinctrl-0 = <&mipi_disp_avee_en>;
159 vin-supply = <&pp5000_z1>;
160 };
161
162 reserved_memory: reserved-memory {
163 #address-cells = <2>;
164 #size-cells = <2>;
165 ranges;
166
167 scp_mem_reserved: memory@50000000 {
168 compatible = "shared-dma-pool";
169 reg = <0 0x50000000 0 0x800000>;
170 no-map;
171 };
172
173 apu_mem: memory@55000000 {
174 compatible = "shared-dma-pool";
175 reg = <0 0x55000000 0 0x1400000>;
176 };
177
178 adsp_mem: memory@60000000 {
179 compatible = "shared-dma-pool";
180 reg = <0 0x60000000 0 0xf00000>;
181 no-map;
182 };
183
184 afe_dma_mem: memory@60f00000 {
185 compatible = "shared-dma-pool";
186 reg = <0 0x60f00000 0 0x100000>;
187 no-map;
188 };
189
190 adsp_dma_mem: memory@61000000 {
191 compatible = "shared-dma-pool";
192 reg = <0 0x61000000 0 0x100000>;
193 no-map;
194 };
195 };
196 };
197
198 &adsp {
199 memory-region = <&adsp_dma_mem>, <&adsp_mem>;
200 pinctrl-names = "default";
201 pinctrl-0 = <&adsp_uart_pins>;
202 status = "okay";
203 };
204
205 &afe {
206 memory-region = <&afe_dma_mem>;
207 mediatek,etdm-out1-cowork-source = <0>; /* in1 */
208 mediatek,etdm-in2-cowork-source = <3>; /* out2 */
209 status = "okay";
210 };
211
212 &auxadc {
213 status = "okay";
214 };
215
216 &cam_vcore {
217 domain-supply = <&mt6359_vproc1_buck_reg>;
218 };
219
220 /*
221 * Geralt is the reference design and doesn't have target TDP.
222 * Ciri is (currently) the only device following Geralt, and its
223 * TDP target is 90 degrees.
224 **/
225 &cpu_little0_alert0 {
226 temperature = <90000>;
227 hysteresis = <2000>;
228 type = "passive";
229 };
230
231 &cpu_little1_alert0 {
232 temperature = <90000>;
233 hysteresis = <2000>;
234 type = "passive";
235 };
236
237 &cpu_little2_alert0 {
238 temperature = <90000>;
239 hysteresis = <2000>;
240 type = "passive";
241 };
242
243 &cpu_little3_alert0 {
244 temperature = <90000>;
245 hysteresis = <2000>;
246 type = "passive";
247 };
248
249 &cpu_big0_alert0 {
250 temperature = <90000>;
251 hysteresis = <2000>;
252 type = "passive";
253 };
254
255 &cpu_big1_alert0 {
256 temperature = <90000>;
257 hysteresis = <2000>;
258 type = "passive";
259 };
260
261 &disp_dsi0 {
262 #address-cells = <1>;
263 #size-cells = <0>;
264 status = "okay";
265
266 dsi_panel: panel@0 {
267 /* Compatible string for different panels can be found in each device dts */
268 reg = <0>;
269 enable-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
270 pinctrl-names = "default";
271 pinctrl-0 = <&mipi_dsi_pins>;
272
273 backlight = <&backlight_lcd0>;
274 avdd-supply = <&ppvar_mipi_disp_avdd>;
275 avee-supply = <&ppvar_mipi_disp_avee>;
276 pp1800-supply = <&mt6359_vm18_ldo_reg>;
277 rotation = <270>;
278
279 status = "okay";
280
281 port {
282 dsi_panel_in: endpoint {
283 remote-endpoint = <&dsi0_out>;
284 };
285 };
286 };
287
288 ports {
289 #address-cells = <1>;
290 #size-cells = <0>;
291
292 port@0 {
293 reg = <0>;
294 dsi0_in: endpoint {
295 remote-endpoint = <&dither0_out>;
296 };
297 };
298
299 port@1 {
300 reg = <1>;
301 dsi0_out: endpoint {
302 remote-endpoint = <&dsi_panel_in>;
303 };
304 };
305 };
306 };
307
308 &disp_pwm0 {
309 pinctrl-names = "default";
310 pinctrl-0 = <&disp_pwm0_pins>;
311 status = "okay";
312 };
313
314 &disp_pwm1 {
315 pinctrl-names = "default";
316 pinctrl-0 = <&disp_pwm1_pins>;
317 };
318
319 &dither0_in {
320 remote-endpoint = <&postmask0_out>;
321 };
322
323 &dither0_out {
324 remote-endpoint = <&dsi0_in>;
325 };
326
327 &ethdr0 {
328 ports {
329 #address-cells = <1>;
330 #size-cells = <0>;
331
332 port@0 {
333 #address-cells = <1>;
334 #size-cells = <0>;
335 reg = <0>;
336
337 ethdr0_in: endpoint@1 {
338 reg = <1>;
339 remote-endpoint = <&vdosys1_ep_ext>;
340 };
341 };
342
343 port@1 {
344 #address-cells = <1>;
345 #size-cells = <0>;
346 reg = <1>;
347
348 ethdr0_out: endpoint@1 {
349 reg = <1>;
350 remote-endpoint = <&merge5_in>;
351 };
352 };
353 };
354 };
355
356 &gamma0_out {
357 remote-endpoint = <&postmask0_in>;
358 };
359
360 &dp_intf1 {
361 status = "okay";
362
363 ports {
364 #address-cells = <1>;
365 #size-cells = <0>;
366
367 port@0 {
368 #address-cells = <1>;
369 #size-cells = <0>;
370 reg = <0>;
371
372 dp_intf1_in: endpoint@1 {
373 reg = <1>;
374 remote-endpoint = <&merge5_out>;
375 };
376 };
377
378 port@1 {
379 #address-cells = <1>;
380 #size-cells = <0>;
381 reg = <1>;
382
383 dp_intf1_out: endpoint@1 {
384 reg = <1>;
385 remote-endpoint = <&dptx_in>;
386 };
387 };
388 };
389 };
390
391 &dp_tx {
392 pinctrl-names = "default";
393 pinctrl-0 = <&dp_tx_hpd>;
394 #sound-dai-cells = <0>;
395 status = "okay";
396
397 ports {
398 #address-cells = <1>;
399 #size-cells = <0>;
400
401 port@0 {
402 reg = <0>;
403 dptx_in: endpoint {
404 remote-endpoint = <&dp_intf1_out>;
405 };
406 };
407
408 port@1 {
409 reg = <1>;
410 dptx_out: endpoint {
411 data-lanes = <0 1 2 3>;
412 };
413 };
414 };
415 };
416
417 &gpu {
418 mali-supply = <&mt6359_vproc2_buck_reg>;
419 status = "okay";
420 };
421
422 &i2c0 {
423 pinctrl-names = "default";
424 pinctrl-0 = <&i2c0_pins>;
425 clock-frequency = <400000>;
426 status = "okay";
427 };
428
429 &i2c1 {
430 pinctrl-names = "default";
431 pinctrl-0 = <&i2c1_pins>;
432 clock-frequency = <400000>;
433 status = "okay";
434
435 tpm@50 {
436 compatible = "google,cr50";
437 reg = <0x50>;
438 interrupts-extended = <&pio 0 IRQ_TYPE_EDGE_RISING>;
439 pinctrl-names = "default";
440 pinctrl-0 = <&gsc_int>;
441 };
442 };
443
444 &i2c2 {
445 pinctrl-names = "default";
446 pinctrl-0 = <&i2c2_pins>;
447 clock-frequency = <400000>;
448 status = "okay";
449 };
450
451 &i2c3 {
452 pinctrl-names = "default";
453 pinctrl-0 = <&i2c3_pins>;
454 clock-frequency = <400000>;
455 status = "okay";
456 };
457
458 &i2c4 {
459 pinctrl-names = "default";
460 pinctrl-0 = <&i2c4_pins>;
461 clock-frequency = <400000>;
462 status = "okay";
463 };
464
465 &i2c5 {
466 pinctrl-names = "default";
467 pinctrl-0 = <&i2c5_pins>;
468 clock-frequency = <400000>;
469 status = "okay";
470 };
471
472 &i2c6 {
473 pinctrl-names = "default";
474 pinctrl-0 = <&i2c6_pins>;
475 clock-frequency = <400000>;
476 status = "okay";
477 };
478
479 &merge5 {
480 ports {
481 #address-cells = <1>;
482 #size-cells = <0>;
483
484 port@0 {
485 #address-cells = <1>;
486 #size-cells = <0>;
487 reg = <0>;
488
489 merge5_in: endpoint@1 {
490 reg = <1>;
491 remote-endpoint = <&ethdr0_out>;
492 };
493 };
494
495 port@1 {
496 #address-cells = <1>;
497 #size-cells = <0>;
498 reg = <1>;
499
500 merge5_out: endpoint@1 {
501 reg = <1>;
502 remote-endpoint = <&dp_intf1_in>;
503 };
504 };
505 };
506 };
507
508 &mfg0 {
509 domain-supply = <&mt6359_vproc2_buck_reg>;
510 };
511
512 &mfg1 {
513 domain-supply = <&mt6359_vsram_others_ldo_reg>;
514 };
515
516 &mipi_tx_config0 {
517 status = "okay";
518 };
519
520 &mmc0 {
521 bus-width = <8>;
522 cap-mmc-highspeed;
523 cap-mmc-hw-reset;
524 hs400-ds-delay = <0x1481b>;
525 max-frequency = <200000000>;
526 mmc-hs200-1_8v;
527 mmc-hs400-1_8v;
528 mmc-hs400-enhanced-strobe;
529 no-sd;
530 no-sdio;
531 non-removable;
532 pinctrl-names = "default", "state_uhs";
533 pinctrl-0 = <&mmc0_pins_default>;
534 pinctrl-1 = <&mmc0_pins_uhs>;
535 supports-cqe;
536 vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
537 vqmmc-supply = <&mt6359_vufs_ldo_reg>;
538 status = "okay";
539 };
540
541 &mt6359codec {
542 mediatek,dmic-mode = <1>; /* one-wire */
543 mediatek,mic-type-0 = <2>; /* DMIC */
544 mediatek,mic-type-2 = <2>; /* DMIC */
545 };
546
547 &mt6359_vcore_buck_reg {
548 regulator-always-on;
549 };
550
551 &mt6359_vgpu11_buck_reg {
552 regulator-always-on;
553 };
554
555 &mt6359_vgpu11_sshub_buck_reg {
556 regulator-min-microvolt = <550000>;
557 regulator-max-microvolt = <550000>;
558 regulator-always-on;
559 };
560
561 &mt6359_vio28_ldo_reg {
562 /delete-property/ regulator-always-on;
563 };
564
565 &mt6359_vm18_ldo_reg {
566 /delete-property/ regulator-always-on;
567 };
568
569 &mt6359_vmodem_buck_reg {
570 regulator-min-microvolt = <775000>;
571 regulator-max-microvolt = <775000>;
572 };
573
574 &mt6359_vpa_buck_reg {
575 regulator-max-microvolt = <3100000>;
576 };
577
578 &mt6359_vproc2_buck_reg {
579 /*
580 * Called "ppvar_dvdd_gpu" in the schematic. Renamed to
581 * "ppvar_dvdd_vgpu" here to match mtk-regulator-coupler requirements.
582 */
583 regulator-name = "ppvar_dvdd_vgpu";
584 regulator-min-microvolt = <550000>;
585 regulator-max-microvolt = <800000>;
586 regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
587 regulator-coupled-max-spread = <6250>;
588 };
589
590 &mt6359_vpu_buck_reg {
591 regulator-always-on;
592 };
593
594 &mt6359_vrf12_ldo_reg {
595 regulator-always-on;
596 };
597
598 &mt6359_vsram_md_ldo_reg {
599 regulator-min-microvolt = <800000>;
600 regulator-max-microvolt = <800000>;
601 };
602
603 &mt6359_vsram_others_ldo_reg {
604 regulator-name = "pp0850_dvdd_sram_gpu";
605 regulator-min-microvolt = <750000>;
606 regulator-max-microvolt = <800000>;
607 regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
608 regulator-coupled-max-spread = <6250>;
609 };
610
611 &mt6359_vufs_ldo_reg {
612 regulator-always-on;
613 };
614
615 &nor_flash {
616 pinctrl-names = "default";
617 pinctrl-0 = <&nor_pins>;
618 status = "okay";
619
620 flash@0 {
621 compatible = "jedec,spi-nor";
622 reg = <0>;
623 spi-max-frequency = <52000000>;
624 };
625 };
626
627 &ovl0_in {
628 remote-endpoint = <&vdosys0_ep_main>;
629 };
630
631 &pcie {
632 pinctrl-names = "default";
633 pinctrl-0 = <&pcie_pins>;
634 status = "okay";
635 };
636
637 &pciephy {
638 status = "okay";
639 };
640
641 &pio {
642 gpio-line-names =
643 "gsc_int",
644 "AP_DISP_BKLTEN",
645 "",
646 "EN_PPVAR_MIPI_DISP",
647 "EN_PPVAR_MIPI_DISP_150MA",
648 "TCHSCR_RST_1V8_L",
649 "TCHSRC_REPORT_DISABLE",
650 "",
651 "",
652 "",
653 "",
654 "I2S_SPKR_DATAOUT",
655 "EN_PP3300_WLAN_X",
656 "WIFI_KILL_1V8_L",
657 "BT_KILL_1V8_L",
658 "AP_FLASH_WP_L", /* ... is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */
659 "",
660 "EDP_HPD_1V8",
661 "WCAM_PWDN_L",
662 "WCAM_RST_L",
663 "UCAM_PWDM_L",
664 "UCAM_RST_L",
665 "WCAM_24M_CLK",
666 "UCAM_24M_CLK",
667 "MT6319_INT",
668 "DISP_RST_1V8_L",
669 "DSIO_DSI_TE",
670 "EN_PP3300_EDP_DISP_X",
671 "TP",
672 "MIPI_BL_PWM_1V8",
673 "EDP_BL_PWM_1V8",
674 "UART_AP_TX_GSC_RX",
675 "UART_GSC_TX_AP_RX",
676 "UART_SSPM_TX_DBGCON_RX",
677 "UART_DBGCON_TX_SSPM_RX",
678 "UART_ADSP_TX_DBGCON_RX",
679 "UART_DBGCON_TX_ADSP_RX",
680 "JTAG_AP_TMS",
681 "JTAG_AP_TCK",
682 "JTAG_AP_TDI",
683 "JTAG_AP_TDO",
684 "JTAG_AP_TRST",
685 "AP_KPCOL0",
686 "TP",
687 "BEEP_ON_OD",
688 "TP",
689 "EC_AP_HPD_OD",
690 "PCIE_WAKE_1V8_ODL",
691 "PCIE_RST_1V8_L",
692 "PCIE_CLKREQ_1V8_ODL",
693 "",
694 "",
695 "",
696 "",
697 "",
698 "AP_I2C_AUD_SCL_1V8",
699 "AP_I2C_AUD_SDA_1V8",
700 "AP_I2C_TPM_SCL_1V8",
701 "AP_I2C_TPM_SDA_1V8",
702 "AP_I2C_TCHSCR_SCL_1V8",
703 "AP_I2C_TCHSCR_SDA_1V8",
704 "AP_I2C_PMIC_SAR_SCL_1V8",
705 "AP_I2C_PMIC_SAR_SDA_1V8",
706 "AP_I2C_EC_HID_KB_SCL_1V8",
707 "AP_I2C_EC_HID_KB_SDA_1V8",
708 "AP_I2C_UCAM_SCL_1V8",
709 "AP_I2C_UCAM_SDA_1V8",
710 "AP_I2C_WCAM_SCL_1V8",
711 "AP_I2C_WCAM_SDA_1V8",
712 "SPI_AP_CS_EC_L",
713 "SPI_AP_CLK_EC",
714 "SPI_AP_DO_EC_DI",
715 "SPI_AP_DI_EC_DO",
716 "TP",
717 "TP",
718 "SPI_AP_CS_TCHSCR_L",
719 "SPI_AP_CLK_TCHSCR",
720 "SPI_AP_DO_TCHSCR_DI",
721 "SPI_AP_DI_TCHSCR_DO",
722 "TP",
723 "TP",
724 "TP",
725 "TP",
726 "",
727 "",
728 "",
729 "TP",
730 "",
731 "SAR_INT_ODL",
732 "",
733 "",
734 "",
735 "PWRAP_SPI_CS_L",
736 "PWRAP_SPI_CK",
737 "PWRAP_SPI_MOSI",
738 "PWRAP_SPI_MISO",
739 "SRCLKENA0",
740 "SRCLKENA1",
741 "SCP_VREQ_VAO",
742 "AP_RTC_CLK32K",
743 "AP_PMIC_WDTRST_L",
744 "AUD_CLK_MOSI",
745 "AUD_SYNC_MOSI",
746 "AUD_DAT_MOSI0",
747 "AUD_DAT_MOSI1",
748 "AUD_DAT_MISO0",
749 "AUD_DAT_MISO1",
750 "SD_CD_ODL",
751 "HP_INT_ODL",
752 "SPKR_INT_ODL",
753 "I2S_HP_DATAIN",
754 "EN_SPKR",
755 "I2S_SPKR_MCLK",
756 "I2S_SPKR_BCLK",
757 "I2S_HP_MCLK",
758 "I2S_HP_BCLK",
759 "I2S_HP_LRCK",
760 "I2S_HP_DATAOUT",
761 "RST_SPKR_L",
762 "I2S_SPKR_LRCK",
763 "I2S_SPKR_DATAIN",
764 "",
765 "",
766 "",
767 "",
768 "SPI_AP_CLK_ROM",
769 "SPI_AP_CS_ROM_L",
770 "SPI_AP_DO_ROM_DI",
771 "SPI_AP_DI_ROM_DO",
772 "TP",
773 "TP",
774 "",
775 "",
776 "",
777 "",
778 "",
779 "",
780 "",
781 "",
782 "EN_PP2800A_UCAM_X",
783 "EN_PP1200_UCAM_X",
784 "EN_PP2800A_WCAM_X",
785 "EN_PP1100_WCAM_X",
786 "TCHSCR_INT_1V8_L",
787 "EN_PP3300_MIPI_TCHSCR_X",
788 "MT7921_PMU_EN_1V8",
789 "EN_PP3300_EDP_TCHSCR_X",
790 "AP_EC_WARM_RST_REQ",
791 "EC_AP_HID_INT_ODL",
792 "EC_AP_INT_ODL",
793 "AP_XHCI_INIT_DONE",
794 "EMMC_DAT7",
795 "EMMC_DAT6",
796 "EMMC_DAT5",
797 "EMMC_DAT4",
798 "EMMC_RST_L",
799 "EMMC_CMD",
800 "EMMC_CLK",
801 "EMMC_DAT3",
802 "EMMC_DAT2",
803 "EMMC_DAT1",
804 "EMMC_DAT0",
805 "EMMC_DSL",
806 "SD_CMD",
807 "SD_CLK",
808 "SD_DAT0",
809 "SD_DAT1",
810 "SD_DAT2",
811 "SD_DAT3",
812 "",
813 "",
814 "USB3_HUB_RST_L",
815 "EC_AP_RSVD0_ODL",
816 "",
817 "",
818 "SPMI_SCL",
819 "SPMI_SDA";
820
821 adsp_uart_pins: adsp-uart-pins {
822 pins-bus {
823 pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
824 <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
825 };
826 };
827
828 aud_etdm_hp_on: aud-etdm-hp-on-pins {
829 pins-bus {
830 pinmux = <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>,
831 <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>,
832 <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>,
833 <PINMUX_GPIO117__FUNC_O_I2SO2_D0>;
834 };
835 };
836
837 aud_etdm_hp_off: aud-etdm-hp-off-pins {
838 pins-bus {
839 pinmux = <PINMUX_GPIO110__FUNC_B_GPIO110>,
840 <PINMUX_GPIO115__FUNC_B_GPIO115>,
841 <PINMUX_GPIO116__FUNC_B_GPIO116>,
842 <PINMUX_GPIO117__FUNC_B_GPIO117>;
843 bias-pull-down;
844 input-enable;
845 };
846 };
847
848 aud_etdm_spk_on: aud-etdm-spk-on-pins {
849 pins-bus {
850 pinmux = <PINMUX_GPIO11__FUNC_O_I2SO1_D0>,
851 <PINMUX_GPIO113__FUNC_B0_TDMIN_BCK>,
852 <PINMUX_GPIO119__FUNC_B0_TDMIN_LRCK>,
853 <PINMUX_GPIO120__FUNC_I0_TDMIN_DI>;
854 drive-strength = <8>;
855 };
856 };
857
858 aud_etdm_spk_off: aud-etdm-spk-off-pins {
859 pins-bus {
860 pinmux = <PINMUX_GPIO11__FUNC_B_GPIO11>,
861 <PINMUX_GPIO113__FUNC_B_GPIO113>,
862 <PINMUX_GPIO119__FUNC_B_GPIO119>,
863 <PINMUX_GPIO120__FUNC_B_GPIO120>;
864 bias-pull-down;
865 input-enable;
866 };
867 };
868
869 aud_mtkaif_on: aud-mtkaif-on-pins {
870 pins-bus {
871 pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>,
872 <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>,
873 <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>,
874 <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>,
875 <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>,
876 <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>;
877 };
878 };
879
880 aud_mtkaif_off: aud-mtkaif-off-pins {
881 pins-bus {
882 pinmux = <PINMUX_GPIO101__FUNC_B_GPIO101>,
883 <PINMUX_GPIO102__FUNC_B_GPIO102>,
884 <PINMUX_GPIO103__FUNC_B_GPIO103>,
885 <PINMUX_GPIO104__FUNC_B_GPIO104>,
886 <PINMUX_GPIO105__FUNC_B_GPIO105>,
887 <PINMUX_GPIO106__FUNC_B_GPIO106>;
888 bias-pull-down;
889 input-enable;
890 };
891 };
892
893 cros_ec_int: cros-ec-int-pins {
894 pins-ec-ap-int-odl {
895 pinmux = <PINMUX_GPIO149__FUNC_B_GPIO149>;
896 input-enable;
897 };
898 };
899
900 disp_pwm0_pins: disp-pwm0-pins {
901 pins-disp-pwm0 {
902 pinmux = <PINMUX_GPIO29__FUNC_O_DISP_PWM0>;
903 output-high;
904 };
905 };
906
907 disp_pwm1_pins: disp-pwm1-pins {
908 pins-disp-pwm1 {
909 pinmux = <PINMUX_GPIO30__FUNC_O_DISP_PWM1>;
910 output-high;
911 };
912 };
913
914 dp_tx_hpd: dp-tx-hpd-pins {
915 pins-dp-tx-hpd {
916 pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>;
917 };
918 };
919
920 gsc_int: gsc-int-pins {
921 pins-gsc-ap-int-odl {
922 pinmux = <PINMUX_GPIO0__FUNC_B_GPIO0>;
923 input-enable;
924 };
925 };
926
927 i2c0_pins: i2c0-pins {
928 pins-bus {
929 pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
930 <PINMUX_GPIO55__FUNC_B1_SCL0>;
931 };
932 };
933
934 i2c1_pins: i2c1-pins {
935 pins-bus {
936 pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
937 <PINMUX_GPIO57__FUNC_B1_SCL1>;
938 };
939 };
940
941 i2c2_pins: i2c2-pins {
942 pins-bus {
943 pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
944 <PINMUX_GPIO59__FUNC_B1_SCL2>;
945 bias-disable;
946 drive-strength = <12>;
947 };
948 };
949
950 i2c3_pins: i2c3-pins {
951 pins-bus {
952 pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
953 <PINMUX_GPIO61__FUNC_B1_SCL3>;
954 };
955 };
956
957 i2c4_pins: i2c4-pins {
958 pins-bus {
959 pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
960 <PINMUX_GPIO63__FUNC_B1_SCL4>;
961 };
962 };
963
964 i2c5_pins: i2c5-pins {
965 pins-bus {
966 pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
967 <PINMUX_GPIO65__FUNC_B1_SCL5>;
968 };
969 };
970
971 i2c6_pins: i2c6-pins {
972 pins-bus {
973 pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
974 <PINMUX_GPIO67__FUNC_B1_SCL6>;
975 };
976 };
977
978 mipi_disp_avdd_en: mipi-disp-avdd-en-pins {
979 pins-en-ppvar-mipi-disp {
980 pinmux = <PINMUX_GPIO3__FUNC_B_GPIO3>;
981 output-low;
982 };
983 };
984
985 mipi_disp_avee_en: mipi-disp-avee-en-pins {
986 pins-en-ppvar-mipi-disp-150ma {
987 pinmux = <PINMUX_GPIO4__FUNC_B_GPIO4>;
988 output-low;
989 };
990 };
991
992 mipi_dsi_pins: mipi-dsi-pins {
993 pins-bus {
994 pinmux = <PINMUX_GPIO1__FUNC_B_GPIO1>,
995 <PINMUX_GPIO25__FUNC_B_GPIO25>;
996 output-low;
997 };
998 };
999
1000 mmc0_pins_default: mmc0-default-pins {
1001 pins-bus {
1002 pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
1003 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
1004 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
1005 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
1006 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
1007 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
1008 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
1009 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
1010 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
1011 input-enable;
1012 drive-strength = <6>;
1013 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
1014 };
1015
1016 pins-clk {
1017 pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
1018 drive-strength = <6>;
1019 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
1020 };
1021
1022 pins-rst {
1023 pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
1024 drive-strength = <6>;
1025 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
1026 };
1027 };
1028
1029 mmc0_pins_uhs: mmc0-uhs-pins {
1030 pins-bus {
1031 pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
1032 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
1033 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
1034 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
1035 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
1036 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
1037 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
1038 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
1039 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
1040 input-enable;
1041 drive-strength = <8>;
1042 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
1043 };
1044
1045 pins-clk {
1046 pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
1047 drive-strength = <8>;
1048 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
1049 };
1050
1051 pins-ds {
1052 pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
1053 drive-strength = <8>;
1054 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
1055 };
1056
1057 pins-rst {
1058 pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
1059 drive-strength = <8>;
1060 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
1061 };
1062 };
1063
1064 nor_pins: nor-default-pins {
1065 pins-clk {
1066 pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
1067 <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
1068 <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
1069 bias-pull-down;
1070 };
1071
1072 pins-cs {
1073 pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>;
1074 bias-pull-up;
1075 };
1076 };
1077
1078 pcie_pins: pcie-default-pins {
1079 pins-bus {
1080 pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
1081 <PINMUX_GPIO48__FUNC_O_PERSTN>,
1082 <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
1083 };
1084 };
1085
1086 scp_pins: scp-pins {
1087 pins-scp-vreq {
1088 pinmux = <PINMUX_GPIO98__FUNC_O_SCP_VREQ_VAO>;
1089 bias-disable;
1090 };
1091 };
1092
1093 spi0_pins: spi0-pins {
1094 pins-bus {
1095 pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
1096 <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
1097 <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
1098 <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
1099 bias-disable;
1100 };
1101 };
1102
1103 spi1_pins_default: spi1-default-pins {
1104 pins-bus {
1105 pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
1106 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
1107 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
1108 <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
1109 bias-disable;
1110 };
1111 };
1112
1113 spi1_pins_sleep: spi1-sleep-pins {
1114 pins-bus {
1115 pinmux = <PINMUX_GPIO75__FUNC_B_GPIO75>,
1116 <PINMUX_GPIO76__FUNC_B_GPIO76>,
1117 <PINMUX_GPIO77__FUNC_B_GPIO77>,
1118 <PINMUX_GPIO78__FUNC_B_GPIO78>;
1119 bias-pull-down;
1120 input-enable;
1121 };
1122 };
1123
1124 spi2_pins: spi2-pins {
1125 pins-bus {
1126 pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
1127 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
1128 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
1129 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
1130 bias-disable;
1131 };
1132 };
1133
1134 uart0_pins: uart0-pins {
1135 pins-bus {
1136 pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
1137 <PINMUX_GPIO32__FUNC_I1_URXD0>;
1138 bias-pull-up;
1139 };
1140 };
1141
1142 wlan_en: wlan-en-pins {
1143 pins-en-pp3300-wlan {
1144 pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
1145 output-low;
1146 };
1147 };
1148 };
1149
1150 &pmic {
1151 interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
1152 };
1153
1154 &postmask0_in {
1155 remote-endpoint = <&gamma0_out>;
1156 };
1157
1158 &postmask0_out {
1159 remote-endpoint = <&dither0_in>;
1160 };
1161
1162 &scp_cluster {
1163 status = "okay";
1164 };
1165
1166 &scp_c0 {
1167 pinctrl-names = "default";
1168 pinctrl-0 = <&scp_pins>;
1169 memory-region = <&scp_mem_reserved>;
1170 status = "okay";
1171 };
1172
1173 &sound {
1174 pinctrl-names = "aud_etdm_hp_on", "aud_etdm_hp_off",
1175 "aud_etdm_spk_on", "aud_etdm_spk_off",
1176 "aud_mtkaif_on", "aud_mtkaif_off";
1177 pinctrl-0 = <&aud_etdm_hp_on>;
1178 pinctrl-1 = <&aud_etdm_hp_off>;
1179 pinctrl-2 = <&aud_etdm_spk_on>;
1180 pinctrl-3 = <&aud_etdm_spk_off>;
1181 pinctrl-4 = <&aud_mtkaif_on>;
1182 pinctrl-5 = <&aud_mtkaif_off>;
1183 mediatek,adsp = <&adsp>;
1184 /* The audio-routing is defined in each board dts */
1185
1186 status = "okay";
1187 };
1188
1189 &spi0 {
1190 pinctrl-names = "default";
1191 pinctrl-0 = <&spi0_pins>;
1192 status = "okay";
1193
1194 cros_ec: ec@0 {
1195 compatible = "google,cros-ec-spi";
1196 reg = <0>;
1197 interrupts-extended = <&pio 149 IRQ_TYPE_LEVEL_LOW>;
1198 pinctrl-names = "default";
1199 pinctrl-0 = <&cros_ec_int>;
1200 spi-max-frequency = <3000000>;
1201
1202 i2c_tunnel: i2c-tunnel {
1203 compatible = "google,cros-ec-i2c-tunnel";
1204 google,remote-bus = <1>;
1205 #address-cells = <1>;
1206 #size-cells = <0>;
1207 };
1208
1209 cbas {
1210 compatible = "google,cros-cbas";
1211 };
1212 };
1213 };
1214
1215 &spi1 {
1216 pinctrl-names = "default", "sleep";
1217 pinctrl-0 = <&spi1_pins_default>;
1218 pinctrl-1 = <&spi1_pins_sleep>;
1219 status = "okay";
1220 };
1221
1222 &spi2 {
1223 pinctrl-names = "default";
1224 pinctrl-0 = <&spi2_pins>;
1225 status = "okay";
1226 };
1227
1228 &uart0 {
1229 pinctrl-names = "default";
1230 pinctrl-0 = <&uart0_pins>;
1231 status = "okay";
1232 };
1233
1234 &u3phy0 {
1235 status = "okay";
1236 };
1237
1238 &u3phy1 {
1239 status = "okay";
1240 };
1241
1242 &u3phy2 {
1243 status = "okay";
1244 };
1245
1246 /* USB detachable base */
1247 &ssusb0 {
1248 dr_mode = "host";
1249 vusb33-supply = <&pp3300_s3>;
1250 status = "okay";
1251 };
1252
1253 &xhci0 {
1254 /* controlled by EC */
1255 vbus-supply = <&pp3300_z1>;
1256 status = "okay";
1257 };
1258
1259 /* USB3 hub */
1260 &ssusb1 {
1261 dr_mode = "host";
1262 vusb33-supply = <&pp3300_s3>;
1263 status = "okay";
1264 };
1265
1266 &xhci1 {
1267 vusb33-supply = <&pp3300_s3>;
1268 vbus-supply = <&pp5000_usb_vbus>;
1269 status = "okay";
1270 };
1271
1272 /* USB BT */
1273 &ssusb2 {
1274 dr_mode = "host";
1275 vusb33-supply = <&pp3300_s3>;
1276 status = "okay";
1277 };
1278
1279 &vdosys0 {
1280 port {
1281 #address-cells = <1>;
1282 #size-cells = <0>;
1283
1284 vdosys0_ep_main: endpoint@0 {
1285 reg = <0>;
1286 remote-endpoint = <&ovl0_in>;
1287 };
1288 };
1289 };
1290
1291 &vdosys1 {
1292 port {
1293 #address-cells = <1>;
1294 #size-cells = <0>;
1295
1296 vdosys1_ep_ext: endpoint@1 {
1297 reg = <1>;
1298 remote-endpoint = <&ethdr0_in>;
1299 };
1300 };
1301 };
1302
1303 &xhci2 {
1304 /* no power supply since MT7921's power is controlled by PCIe */
1305 /* MT7921's USB BT has issues with USB2 LPM */
1306 usb2-lpm-disable;
1307 status = "okay";
1308 };
1309
1310 #include <arm/cros-ec-keyboard.dtsi>
1311
1312 &keyboard_controller {
1313 function-row-physmap = <
1314 MATRIX_KEY(0x00, 0x02, 0) /* T1 */
1315 MATRIX_KEY(0x03, 0x02, 0) /* T2 */
1316 MATRIX_KEY(0x02, 0x02, 0) /* T3 */
1317 MATRIX_KEY(0x01, 0x02, 0) /* T4 */
1318 MATRIX_KEY(0x03, 0x04, 0) /* T5 */
1319 MATRIX_KEY(0x02, 0x04, 0) /* T6 */
1320 MATRIX_KEY(0x01, 0x04, 0) /* T7 */
1321 MATRIX_KEY(0x02, 0x09, 0) /* T8 */
1322 MATRIX_KEY(0x01, 0x09, 0) /* T9 */
1323 MATRIX_KEY(0x00, 0x04, 0) /* T10 */
1324 >;
1325
1326 linux,keymap = <
1327 MATRIX_KEY(0x00, 0x02, KEY_BACK)
1328 MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
1329 MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
1330 MATRIX_KEY(0x01, 0x02, KEY_SCALE)
1331 MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN)
1332 MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP)
1333 MATRIX_KEY(0x01, 0x04, KEY_MICMUTE)
1334 MATRIX_KEY(0x02, 0x09, KEY_MUTE)
1335 MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
1336 MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
1337 CROS_STD_MAIN_KEYMAP
1338 >;
1339 };