Debian Codegraph @

scripts/dtc/include-prefixes/arm64/mediatek/mt8188-evb.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
2 /*
3 * Copyright (C) 2023 MediaTek Inc.
4 */
5 /dts-v1/;
6 #include "mt8188.dtsi"
7 #include "mt6359.dtsi"
8
9 / {
10 model = "MediaTek MT8188 evaluation board";
11 compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
12
13 aliases {
14 serial0 = &uart0;
15 i2c0 = &i2c0;
16 i2c1 = &i2c1;
17 i2c2 = &i2c2;
18 i2c3 = &i2c3;
19 i2c4 = &i2c4;
20 i2c5 = &i2c5;
21 i2c6 = &i2c6;
22 mmc0 = &mmc0;
23 };
24
25 chosen: chosen {
26 stdout-path = "serial0:115200n8";
27 };
28
29 memory@40000000 {
30 device_type = "memory";
31 reg = <0 0x40000000 0 0x80000000>;
32 };
33
34 reserved_memory: reserved-memory {
35 #address-cells = <2>;
36 #size-cells = <2>;
37 ranges;
38
39 scp_mem_reserved: memory@50000000 {
40 compatible = "shared-dma-pool";
41 reg = <0 0x50000000 0 0x2900000>;
42 no-map;
43 };
44 };
45 };
46
47 &auxadc {
48 status = "okay";
49 };
50
51 &i2c0 {
52 pinctrl-names = "default";
53 pinctrl-0 = <&i2c0_pins>;
54 clock-frequency = <400000>;
55 status = "okay";
56 };
57
58 &i2c1 {
59 pinctrl-names = "default";
60 pinctrl-0 = <&i2c1_pins>;
61 clock-frequency = <400000>;
62 status = "okay";
63 };
64
65 &i2c2 {
66 pinctrl-names = "default";
67 pinctrl-0 = <&i2c2_pins>;
68 clock-frequency = <400000>;
69 status = "okay";
70 };
71
72 &i2c3 {
73 pinctrl-names = "default";
74 pinctrl-0 = <&i2c3_pins>;
75 clock-frequency = <400000>;
76 status = "okay";
77 };
78
79 &i2c4 {
80 pinctrl-names = "default";
81 pinctrl-0 = <&i2c4_pins>;
82 clock-frequency = <400000>;
83 status = "okay";
84 };
85
86 &i2c5 {
87 pinctrl-names = "default";
88 pinctrl-0 = <&i2c5_pins>;
89 clock-frequency = <400000>;
90 status = "okay";
91 };
92
93 &i2c6 {
94 pinctrl-names = "default";
95 pinctrl-0 = <&i2c6_pins>;
96 clock-frequency = <400000>;
97 status = "okay";
98 };
99
100 &mmc0 {
101 bus-width = <8>;
102 hs400-ds-delay = <0x1481b>;
103 max-frequency = <200000000>;
104
105 cap-mmc-highspeed;
106 mmc-hs200-1_8v;
107 mmc-hs400-1_8v;
108 supports-cqe;
109 cap-mmc-hw-reset;
110 no-sdio;
111 no-sd;
112 non-removable;
113
114 vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
115 vqmmc-supply = <&mt6359_vufs_ldo_reg>;
116
117 pinctrl-names = "default", "state_uhs";
118 pinctrl-0 = <&mmc0_default_pins>;
119 pinctrl-1 = <&mmc0_uhs_pins>;
120
121 status = "okay";
122 };
123
124 &mt6359_vcore_buck_reg {
125 regulator-always-on;
126 };
127
128 &mt6359_vgpu11_buck_reg {
129 regulator-always-on;
130 };
131
132 &mt6359_vpu_buck_reg {
133 regulator-always-on;
134 };
135
136 &mt6359_vrf12_ldo_reg {
137 regulator-always-on;
138 };
139
140 &nor_flash {
141 pinctrl-names = "default";
142 pinctrl-0 = <&nor_pins_default>;
143 status = "okay";
144
145 flash@0 {
146 compatible = "jedec,spi-nor";
147 reg = <0>;
148 spi-max-frequency = <52000000>;
149 };
150 };
151
152 &pio {
153 adsp_uart_pins: adsp-uart-pins {
154 pins-tx-rx {
155 pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
156 <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
157 };
158 };
159
160 i2c0_pins: i2c0-pins {
161 pins-bus {
162 pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
163 <PINMUX_GPIO55__FUNC_B1_SCL0>;
164 bias-pull-up = <MTK_PULL_SET_RSEL_011>;
165 };
166 };
167
168 i2c1_pins: i2c1-pins {
169 pins-bus {
170 pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
171 <PINMUX_GPIO57__FUNC_B1_SCL1>;
172 bias-pull-up = <MTK_PULL_SET_RSEL_011>;
173 };
174 };
175
176 i2c2_pins: i2c2-pins {
177 pins-bus {
178 pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
179 <PINMUX_GPIO59__FUNC_B1_SCL2>;
180 bias-pull-up = <MTK_PULL_SET_RSEL_011>;
181 };
182 };
183
184 i2c3_pins: i2c3-pins {
185 pins-bus {
186 pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
187 <PINMUX_GPIO61__FUNC_B1_SCL3>;
188 bias-pull-up = <MTK_PULL_SET_RSEL_011>;
189 };
190 };
191
192 i2c4_pins: i2c4-pins {
193 pins-bus {
194 pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
195 <PINMUX_GPIO63__FUNC_B1_SCL4>;
196 bias-pull-up = <MTK_PULL_SET_RSEL_011>;
197 };
198 };
199
200 i2c5_pins: i2c5-pins {
201 pins-bus {
202 pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
203 <PINMUX_GPIO65__FUNC_B1_SCL5>;
204 bias-pull-up = <MTK_PULL_SET_RSEL_011>;
205 };
206 };
207
208 i2c6_pins: i2c6-pins {
209 pins-bus {
210 pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
211 <PINMUX_GPIO67__FUNC_B1_SCL6>;
212 bias-pull-up = <MTK_PULL_SET_RSEL_011>;
213 };
214 };
215
216 mmc0_default_pins: mmc0-default-pins {
217 pins-cmd-dat {
218 pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
219 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
220 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
221 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
222 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
223 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
224 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
225 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
226 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
227 input-enable;
228 drive-strength = <6>;
229 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
230 };
231
232 pins-clk {
233 pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
234 drive-strength = <6>;
235 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
236 };
237
238 pins-rst {
239 pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
240 drive-strength = <6>;
241 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
242 };
243 };
244
245 mmc0_uhs_pins: mmc0-uhs-pins {
246 pins-cmd-dat {
247 pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
248 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
249 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
250 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
251 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
252 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
253 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
254 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
255 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
256 input-enable;
257 drive-strength = <8>;
258 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
259 };
260
261 pins-clk-ds {
262 pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>,
263 <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
264 drive-strength = <8>;
265 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
266 };
267
268 pins-rst {
269 pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
270 drive-strength = <8>;
271 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
272 };
273 };
274
275 nor_pins_default: nor-pins {
276 pins-io-ck {
277 pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
278 <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
279 <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
280 bias-pull-down;
281 };
282
283 pins-io-cs {
284 pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>,
285 <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>,
286 <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>;
287 bias-pull-up;
288 };
289 };
290
291 spi0_pins: spi0-pins {
292 pins-spi {
293 pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
294 <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
295 <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
296 <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
297 bias-disable;
298 };
299 };
300
301 spi1_pins: spi1-pins {
302 pins-spi {
303 pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
304 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
305 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
306 <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
307 bias-disable;
308 };
309 };
310
311 spi2_pins: spi2-pins {
312 pins-spi {
313 pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
314 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
315 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
316 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
317 bias-disable;
318 };
319 };
320
321 uart0_pins: uart0-pins {
322 pins-rx-tx {
323 pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
324 <PINMUX_GPIO32__FUNC_I1_URXD0>;
325 bias-pull-up;
326 };
327 };
328 };
329
330 &pmic {
331 interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
332 };
333
334 &scp_cluster {
335 status = "okay";
336 };
337
338 &scp_c0 {
339 memory-region = <&scp_mem_reserved>;
340 status = "okay";
341 };
342
343 &spi0 {
344 pinctrl-names = "default";
345 pinctrl-0 = <&spi0_pins>;
346 status = "okay";
347 };
348
349 &spi1 {
350 pinctrl-names = "default";
351 pinctrl-0 = <&spi1_pins>;
352 status = "okay";
353 };
354
355 &spi2 {
356 pinctrl-names = "default";
357 pinctrl-0 = <&spi2_pins>;
358 status = "okay";
359 };
360
361 &u3phy0 {
362 status = "okay";
363 };
364
365 &u3phy1 {
366 status = "okay";
367 };
368
369 &u3phy2 {
370 status = "okay";
371 };
372
373 &uart0 {
374 pinctrl-names = "default";
375 pinctrl-0 = <&uart0_pins>;
376 status = "okay";
377 };
378
379 &xhci0 {
380 status = "okay";
381 };
382
383 &xhci1 {
384 status = "okay";
385 };
386
387 &xhci2 {
388 status = "okay";
389 };