Debian Codegraph @

scripts/dtc/include-prefixes/arm64/mediatek/mt8186-evb.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2 /*
3 * Copyright (C) 2022 MediaTek Inc.
4 */
5 /dts-v1/;
6 #include "mt8186.dtsi"
7
8 / {
9 model = "MediaTek MT8186 evaluation board";
10 chassis-type = "embedded";
11 compatible = "mediatek,mt8186-evb", "mediatek,mt8186";
12
13 aliases {
14 serial0 = &uart0;
15 };
16
17 chosen {
18 stdout-path = "serial0:921600n8";
19 };
20
21 memory@40000000 {
22 device_type = "memory";
23 reg = <0 0x40000000 0 0x80000000>;
24 };
25
26 vproc: regulator-vproc12 {
27 compatible = "regulator-fixed";
28 regulator-name = "vproc12";
29 regulator-always-on;
30 regulator-boot-on;
31 regulator-min-microvolt = <1200000>;
32 regulator-max-microvolt = <1200000>;
33 };
34 };
35
36 &cci {
37 proc-supply = <&vproc>;
38 };
39
40 &i2c0 {
41 status = "okay";
42
43 clock-frequency = <400000>;
44 pinctrl-names = "default";
45 pinctrl-0 = <&i2c0_pins>;
46 };
47
48 &i2c1 {
49 status = "okay";
50
51 clock-frequency = <400000>;
52 i2c-scl-internal-delay-ns = <8000>;
53 pinctrl-names = "default";
54 pinctrl-0 = <&i2c1_pins>;
55 };
56
57 &i2c2 {
58 status = "okay";
59
60 clock-frequency = <400000>;
61 i2c-scl-internal-delay-ns = <10000>;
62 pinctrl-names = "default";
63 pinctrl-0 = <&i2c2_pins>;
64 };
65
66 &i2c3 {
67 status = "okay";
68
69 clock-frequency = <400000>;
70 pinctrl-names = "default";
71 pinctrl-0 = <&i2c3_pins>;
72 };
73
74 &i2c4 {
75 status = "okay";
76
77 clock-frequency = <400000>;
78 pinctrl-names = "default";
79 pinctrl-0 = <&i2c4_pins>;
80 };
81
82 &i2c5 {
83 status = "okay";
84
85 clock-frequency = <400000>;
86 pinctrl-names = "default";
87 pinctrl-0 = <&i2c5_pins>;
88 };
89
90 &i2c6 {
91 status = "okay";
92
93 clock-frequency = <400000>;
94 pinctrl-names = "default";
95 pinctrl-0 = <&i2c6_pins>;
96 };
97
98 &i2c7 {
99 status = "okay";
100
101 clock-frequency = <400000>;
102 pinctrl-names = "default";
103 pinctrl-0 = <&i2c7_pins>;
104 };
105
106 &i2c8 {
107 status = "okay";
108
109 clock-frequency = <400000>;
110 pinctrl-names = "default";
111 pinctrl-0 = <&i2c8_pins>;
112 };
113
114 &i2c9 {
115 status = "okay";
116
117 clock-frequency = <400000>;
118 pinctrl-names = "default";
119 pinctrl-0 = <&i2c9_pins>;
120 };
121
122 &pio {
123 i2c0_pins: i2c0-default-pins {
124 pins-bus {
125 pinmux = <PINMUX_GPIO128__FUNC_SDA0>,
126 <PINMUX_GPIO127__FUNC_SCL0>;
127 bias-disable;
128 drive-strength-microamp = <1000>;
129 input-enable;
130 };
131 };
132
133 i2c1_pins: i2c1-default-pins {
134 pins-bus {
135 pinmux = <PINMUX_GPIO130__FUNC_SDA1>,
136 <PINMUX_GPIO129__FUNC_SCL1>;
137 bias-disable;
138 drive-strength-microamp = <1000>;
139 input-enable;
140 };
141 };
142
143 i2c2_pins: i2c2-default-pins {
144 pins-bus {
145 pinmux = <PINMUX_GPIO132__FUNC_SDA2>,
146 <PINMUX_GPIO131__FUNC_SCL2>;
147 bias-disable;
148 drive-strength-microamp = <1000>;
149 input-enable;
150 };
151 };
152
153 i2c3_pins: i2c3-default-pins {
154 pins-bus {
155 pinmux = <PINMUX_GPIO134__FUNC_SDA3>,
156 <PINMUX_GPIO133__FUNC_SCL3>;
157 bias-disable;
158 drive-strength-microamp = <1000>;
159 input-enable;
160 };
161 };
162
163 i2c4_pins: i2c4-default-pins {
164 pins-bus {
165 pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
166 <PINMUX_GPIO135__FUNC_SCL4>;
167 bias-disable;
168 drive-strength-microamp = <1000>;
169 input-enable;
170 };
171 };
172
173 i2c5_pins: i2c5-default-pins {
174 pins-bus {
175 pinmux = <PINMUX_GPIO138__FUNC_SDA5>,
176 <PINMUX_GPIO137__FUNC_SCL5>;
177 bias-disable;
178 drive-strength-microamp = <1000>;
179 input-enable;
180 };
181 };
182
183 i2c6_pins: i2c6-default-pins {
184 pins-bus {
185 pinmux = <PINMUX_GPIO140__FUNC_SDA6>,
186 <PINMUX_GPIO139__FUNC_SCL6>;
187 bias-pull-up = <MTK_PULL_SET_RSEL_001>;
188 drive-strength-microamp = <1000>;
189 input-enable;
190 };
191 };
192
193 i2c7_pins: i2c7-default-pins {
194 pins-bus {
195 pinmux = <PINMUX_GPIO142__FUNC_SDA7>,
196 <PINMUX_GPIO141__FUNC_SCL7>;
197 bias-disable;
198 drive-strength-microamp = <1000>;
199 input-enable;
200 };
201 };
202
203 i2c8_pins: i2c8-default-pins {
204 pins-bus {
205 pinmux = <PINMUX_GPIO144__FUNC_SDA8>,
206 <PINMUX_GPIO143__FUNC_SCL8>;
207 bias-disable;
208 drive-strength-microamp = <1000>;
209 input-enable;
210 };
211 };
212
213 i2c9_pins: i2c9-default-pins {
214 pins-bus {
215 pinmux = <PINMUX_GPIO146__FUNC_SDA9>,
216 <PINMUX_GPIO145__FUNC_SCL9>;
217 bias-pull-up = <MTK_PULL_SET_RSEL_001>;
218 drive-strength-microamp = <1000>;
219 input-enable;
220 };
221 };
222 };
223
224 &u3phy0 {
225 status = "okay";
226 };
227
228 &u3phy1 {
229 status = "okay";
230 };
231
232 &uart0 {
233 status = "okay";
234 };