| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 |
/* |
| 3 |
* Copyright 2022 Google LLC |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include "mt8186-corsola.dtsi" |
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
|
| 10 |
/ { |
| 11 |
aliases { |
| 12 |
i2c4 = &i2c4; |
| 13 |
}; |
| 14 |
}; |
| 15 |
|
| 16 |
&dsi_out { |
| 17 |
remote-endpoint = <&ps8640_in>; |
| 18 |
}; |
| 19 |
|
| 20 |
&i2c0 { |
| 21 |
clock-frequency = <400000>; |
| 22 |
|
| 23 |
edp-bridge@8 { |
| 24 |
compatible = "parade,ps8640"; |
| 25 |
reg = <0x8>; |
| 26 |
pinctrl-names = "default"; |
| 27 |
pinctrl-0 = <&ps8640_pins>; |
| 28 |
powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>; |
| 29 |
reset-gpios = <&pio 98 GPIO_ACTIVE_LOW>; |
| 30 |
vdd12-supply = <&mt6366_vrf12_reg>; |
| 31 |
vdd33-supply = <&mt6366_vcn33_reg>; |
| 32 |
|
| 33 |
ports { |
| 34 |
#address-cells = <1>; |
| 35 |
#size-cells = <0>; |
| 36 |
|
| 37 |
port@0 { |
| 38 |
reg = <0>; |
| 39 |
|
| 40 |
ps8640_in: endpoint { |
| 41 |
remote-endpoint = <&dsi_out>; |
| 42 |
}; |
| 43 |
}; |
| 44 |
|
| 45 |
port@1 { |
| 46 |
reg = <1>; |
| 47 |
|
| 48 |
ps8640_out: endpoint { |
| 49 |
remote-endpoint = <&panel_in>; |
| 50 |
}; |
| 51 |
}; |
| 52 |
}; |
| 53 |
|
| 54 |
aux-bus { |
| 55 |
panel { |
| 56 |
compatible = "edp-panel"; |
| 57 |
power-supply = <&pp3300_disp_x>; |
| 58 |
backlight = <&backlight_lcd0>; |
| 59 |
|
| 60 |
port { |
| 61 |
panel_in: endpoint { |
| 62 |
remote-endpoint = <&ps8640_out>; |
| 63 |
}; |
| 64 |
}; |
| 65 |
}; |
| 66 |
}; |
| 67 |
}; |
| 68 |
}; |
| 69 |
|
| 70 |
&i2c1 { |
| 71 |
i2c-scl-internal-delay-ns = <10000>; |
| 72 |
|
| 73 |
touchscreen: touchscreen@10 { |
| 74 |
compatible = "elan,ekth6915"; |
| 75 |
reg = <0x10>; |
| 76 |
interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; |
| 77 |
pinctrl-names = "default"; |
| 78 |
pinctrl-0 = <&touchscreen_pins>; |
| 79 |
reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>; |
| 80 |
vcc33-supply = <&pp3300_s3>; |
| 81 |
no-reset-on-power-off; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
&i2c4 { |
| 86 |
pinctrl-names = "default"; |
| 87 |
pinctrl-0 = <&i2c4_pins>; |
| 88 |
clock-frequency = <400000>; |
| 89 |
status = "okay"; |
| 90 |
|
| 91 |
proximity@28 { |
| 92 |
compatible = "semtech,sx9324"; |
| 93 |
reg = <0x28>; |
| 94 |
#io-channel-cells = <1>; |
| 95 |
interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>; |
| 96 |
pinctrl-names = "default"; |
| 97 |
pinctrl-0 = <&sar_sensor_pins>; |
| 98 |
vdd-supply = <&mt6366_vio18_reg>; |
| 99 |
svdd-supply = <&mt6366_vio18_reg>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
&pio { |
| 104 |
i2c4_pins: i2c4-pins { |
| 105 |
pins-bus { |
| 106 |
pinmux = <PINMUX_GPIO136__FUNC_SDA4>, |
| 107 |
<PINMUX_GPIO135__FUNC_SCL4>; |
| 108 |
bias-disable; |
| 109 |
drive-strength = <4>; |
| 110 |
input-enable; |
| 111 |
}; |
| 112 |
}; |
| 113 |
|
| 114 |
ps8640_pins: ps8640-pins { |
| 115 |
pins-pwrdn-rst { |
| 116 |
pinmux = <PINMUX_GPIO96__FUNC_GPIO96>, |
| 117 |
<PINMUX_GPIO98__FUNC_GPIO98>; |
| 118 |
output-low; |
| 119 |
}; |
| 120 |
}; |
| 121 |
|
| 122 |
sar_sensor_pins: sar-sensor-pins { |
| 123 |
pins-irq { |
| 124 |
pinmux = <PINMUX_GPIO5__FUNC_GPIO5>; |
| 125 |
input-enable; |
| 126 |
bias-pull-up; |
| 127 |
}; |
| 128 |
}; |
| 129 |
}; |