| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (C) 2025 MediaTek Inc. |
| 4 |
* Author: Sam.Shih <[email protected]> |
| 5 |
* Author: Frank Wunderlich <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
#include "mt7988a.dtsi" |
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include <dt-bindings/input/input.h> |
| 13 |
#include <dt-bindings/leds/common.h> |
| 14 |
#include <dt-bindings/regulator/richtek,rt5190a-regulator.h> |
| 15 |
|
| 16 |
/ { |
| 17 |
aliases { |
| 18 |
ethernet0 = &gmac0; |
| 19 |
i2c0 = &i2c0; |
| 20 |
i2c1 = &i2c1; |
| 21 |
i2c2 = &i2c2; |
| 22 |
/* PCA9548 (0-0070) provides 4 i2c channels */ |
| 23 |
i2c3 = &imux0; |
| 24 |
i2c4 = &imux1_sfp1; |
| 25 |
i2c5 = &imux2_sfp2; |
| 26 |
i2c6 = &imux3_wifi; |
| 27 |
}; |
| 28 |
|
| 29 |
chosen { |
| 30 |
stdout-path = &serial0; |
| 31 |
}; |
| 32 |
|
| 33 |
fan: pwm-fan { |
| 34 |
compatible = "pwm-fan"; |
| 35 |
/* cooling level (0, 1, 2, 3) : (0% duty, 30% duty, 50% duty, 100% duty) */ |
| 36 |
cooling-levels = <0 80 128 255>; |
| 37 |
pinctrl-0 = <&pwm0_pins>; |
| 38 |
pinctrl-names = "default"; |
| 39 |
pwms = <&pwm 0 50000>; |
| 40 |
#cooling-cells = <2>; |
| 41 |
}; |
| 42 |
|
| 43 |
gpio-keys { |
| 44 |
compatible = "gpio-keys"; |
| 45 |
|
| 46 |
button-reset { |
| 47 |
label = "reset"; |
| 48 |
gpios = <&pio 13 GPIO_ACTIVE_LOW>; |
| 49 |
linux,code = <KEY_RESTART>; |
| 50 |
}; |
| 51 |
|
| 52 |
button-wps { |
| 53 |
label = "WPS"; |
| 54 |
gpios = <&pio 14 GPIO_ACTIVE_LOW>; |
| 55 |
linux,code = <KEY_WPS_BUTTON>; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
gpio-leds { |
| 60 |
compatible = "gpio-leds"; |
| 61 |
|
| 62 |
led_red: sys-led-red { |
| 63 |
color = <LED_COLOR_ID_RED>; |
| 64 |
gpios = <&pca9555 15 GPIO_ACTIVE_HIGH>; |
| 65 |
default-state = "on"; |
| 66 |
}; |
| 67 |
|
| 68 |
led_blue: sys-led-blue { |
| 69 |
color = <LED_COLOR_ID_BLUE>; |
| 70 |
gpios = <&pca9555 14 GPIO_ACTIVE_HIGH>; |
| 71 |
default-state = "on"; |
| 72 |
}; |
| 73 |
}; |
| 74 |
|
| 75 |
reg_1p8v: regulator-dvdd1v8 { |
| 76 |
compatible = "regulator-fixed"; |
| 77 |
regulator-name = "DVDD1V8_SOC"; |
| 78 |
regulator-min-microvolt = <1800000>; |
| 79 |
regulator-max-microvolt = <1800000>; |
| 80 |
regulator-boot-on; |
| 81 |
regulator-always-on; |
| 82 |
}; |
| 83 |
|
| 84 |
reg_3p3v: regulator-3v3vd { |
| 85 |
compatible = "regulator-fixed"; |
| 86 |
regulator-name = "3V3VD"; |
| 87 |
regulator-min-microvolt = <3300000>; |
| 88 |
regulator-max-microvolt = <3300000>; |
| 89 |
regulator-boot-on; |
| 90 |
regulator-always-on; |
| 91 |
}; |
| 92 |
|
| 93 |
/* SFP1 cage (LAN) */ |
| 94 |
sfp1: sfp1 { |
| 95 |
compatible = "sff,sfp"; |
| 96 |
i2c-bus = <&imux1_sfp1>; |
| 97 |
los-gpios = <&pio 70 GPIO_ACTIVE_HIGH>; |
| 98 |
mod-def0-gpios = <&pio 69 GPIO_ACTIVE_LOW>; |
| 99 |
tx-disable-gpios = <&pio 21 GPIO_ACTIVE_HIGH>; |
| 100 |
maximum-power-milliwatt = <3000>; |
| 101 |
}; |
| 102 |
|
| 103 |
/* SFP2 cage (WAN) */ |
| 104 |
sfp2: sfp2 { |
| 105 |
compatible = "sff,sfp"; |
| 106 |
i2c-bus = <&imux2_sfp2>; |
| 107 |
los-gpios = <&pio 2 GPIO_ACTIVE_HIGH>; |
| 108 |
mod-def0-gpios = <&pio 1 GPIO_ACTIVE_LOW>; |
| 109 |
tx-disable-gpios = <&pio 0 GPIO_ACTIVE_HIGH>; |
| 110 |
maximum-power-milliwatt = <3000>; |
| 111 |
}; |
| 112 |
}; |
| 113 |
|
| 114 |
&cci { |
| 115 |
proc-supply = <&rt5190_buck3>; |
| 116 |
}; |
| 117 |
|
| 118 |
&cpu0 { |
| 119 |
proc-supply = <&rt5190_buck3>; |
| 120 |
}; |
| 121 |
|
| 122 |
&cpu1 { |
| 123 |
proc-supply = <&rt5190_buck3>; |
| 124 |
}; |
| 125 |
|
| 126 |
&cpu2 { |
| 127 |
proc-supply = <&rt5190_buck3>; |
| 128 |
}; |
| 129 |
|
| 130 |
&cpu3 { |
| 131 |
proc-supply = <&rt5190_buck3>; |
| 132 |
}; |
| 133 |
|
| 134 |
&cpu_thermal { |
| 135 |
trips { |
| 136 |
cpu_trip_hot: hot { |
| 137 |
temperature = <120000>; |
| 138 |
hysteresis = <2000>; |
| 139 |
type = "hot"; |
| 140 |
}; |
| 141 |
|
| 142 |
cpu_trip_active_high: active-high { |
| 143 |
temperature = <115000>; |
| 144 |
hysteresis = <2000>; |
| 145 |
type = "active"; |
| 146 |
}; |
| 147 |
|
| 148 |
cpu_trip_active_med: active-med { |
| 149 |
temperature = <85000>; |
| 150 |
hysteresis = <2000>; |
| 151 |
type = "active"; |
| 152 |
}; |
| 153 |
|
| 154 |
cpu_trip_active_low: active-low { |
| 155 |
temperature = <40000>; |
| 156 |
hysteresis = <2000>; |
| 157 |
type = "active"; |
| 158 |
}; |
| 159 |
}; |
| 160 |
|
| 161 |
cooling-maps { |
| 162 |
map-cpu-active-high { |
| 163 |
/* active: set fan to cooling level 2 */ |
| 164 |
cooling-device = <&fan 3 3>; |
| 165 |
trip = <&cpu_trip_active_high>; |
| 166 |
}; |
| 167 |
|
| 168 |
map-cpu-active-med { |
| 169 |
/* active: set fan to cooling level 1 */ |
| 170 |
cooling-device = <&fan 2 2>; |
| 171 |
trip = <&cpu_trip_active_med>; |
| 172 |
}; |
| 173 |
|
| 174 |
map-cpu-active-low { |
| 175 |
/* active: set fan to cooling level 0 */ |
| 176 |
cooling-device = <&fan 1 1>; |
| 177 |
trip = <&cpu_trip_active_low>; |
| 178 |
}; |
| 179 |
}; |
| 180 |
}; |
| 181 |
|
| 182 |
ð { |
| 183 |
pinctrl-0 = <&mdio0_pins>; |
| 184 |
pinctrl-names = "default"; |
| 185 |
status = "okay"; |
| 186 |
}; |
| 187 |
|
| 188 |
&fan { |
| 189 |
pinctrl-0 = <&pwm0_pins>; |
| 190 |
pinctrl-names = "default"; |
| 191 |
pwms = <&pwm 0 50000>; |
| 192 |
status = "okay"; |
| 193 |
}; |
| 194 |
|
| 195 |
&gmac0 { |
| 196 |
status = "okay"; |
| 197 |
}; |
| 198 |
|
| 199 |
&gsw_phy0 { |
| 200 |
pinctrl-0 = <&gbe0_led0_pins>; |
| 201 |
pinctrl-names = "gbe-led"; |
| 202 |
}; |
| 203 |
|
| 204 |
&gsw_phy0_led0 { |
| 205 |
color = <LED_COLOR_ID_YELLOW>; |
| 206 |
status = "okay"; |
| 207 |
}; |
| 208 |
|
| 209 |
&gsw_port0 { |
| 210 |
label = "mgmt"; |
| 211 |
}; |
| 212 |
|
| 213 |
/* R4Pro has only port 0 connected, so disable the others */ |
| 214 |
&gsw_phy1 { |
| 215 |
status = "disabled"; |
| 216 |
}; |
| 217 |
|
| 218 |
&gsw_port1 { |
| 219 |
status = "disabled"; |
| 220 |
}; |
| 221 |
|
| 222 |
&gsw_phy2 { |
| 223 |
status = "disabled"; |
| 224 |
}; |
| 225 |
|
| 226 |
&gsw_port2 { |
| 227 |
status = "disabled"; |
| 228 |
}; |
| 229 |
|
| 230 |
&gsw_phy3 { |
| 231 |
status = "disabled"; |
| 232 |
}; |
| 233 |
|
| 234 |
&gsw_port3 { |
| 235 |
status = "disabled"; |
| 236 |
}; |
| 237 |
|
| 238 |
&i2c0 { |
| 239 |
pinctrl-0 = <&i2c0_pins>; |
| 240 |
pinctrl-names = "default"; |
| 241 |
status = "okay"; |
| 242 |
|
| 243 |
rt5190a_64: rt5190a@64 { |
| 244 |
compatible = "richtek,rt5190a"; |
| 245 |
reg = <0x64>; |
| 246 |
vin2-supply = <&rt5190_buck1>; |
| 247 |
vin3-supply = <&rt5190_buck1>; |
| 248 |
vin4-supply = <&rt5190_buck1>; |
| 249 |
|
| 250 |
regulators { |
| 251 |
rt5190_buck1: buck1 { |
| 252 |
regulator-name = "rt5190a-buck1"; |
| 253 |
regulator-min-microvolt = <5090000>; |
| 254 |
regulator-max-microvolt = <5090000>; |
| 255 |
regulator-allowed-modes = |
| 256 |
<RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>; |
| 257 |
regulator-boot-on; |
| 258 |
regulator-always-on; |
| 259 |
}; |
| 260 |
|
| 261 |
buck2 { |
| 262 |
regulator-name = "vcore"; |
| 263 |
regulator-min-microvolt = <600000>; |
| 264 |
regulator-max-microvolt = <1400000>; |
| 265 |
regulator-boot-on; |
| 266 |
regulator-always-on; |
| 267 |
}; |
| 268 |
|
| 269 |
rt5190_buck3: buck3 { |
| 270 |
regulator-name = "vproc"; |
| 271 |
regulator-min-microvolt = <600000>; |
| 272 |
regulator-max-microvolt = <1400000>; |
| 273 |
regulator-boot-on; |
| 274 |
regulator-always-on; |
| 275 |
}; |
| 276 |
|
| 277 |
buck4 { |
| 278 |
regulator-name = "rt5190a-buck4"; |
| 279 |
regulator-min-microvolt = <1800000>; |
| 280 |
regulator-max-microvolt = <1800000>; |
| 281 |
regulator-allowed-modes = |
| 282 |
<RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>; |
| 283 |
regulator-boot-on; |
| 284 |
regulator-always-on; |
| 285 |
}; |
| 286 |
|
| 287 |
ldo { |
| 288 |
regulator-name = "rt5190a-ldo"; |
| 289 |
regulator-min-microvolt = <1800000>; |
| 290 |
regulator-max-microvolt = <1800000>; |
| 291 |
regulator-boot-on; |
| 292 |
regulator-always-on; |
| 293 |
}; |
| 294 |
}; |
| 295 |
}; |
| 296 |
}; |
| 297 |
|
| 298 |
&i2c1 { |
| 299 |
pinctrl-0 = <&i2c1_pins>; |
| 300 |
pinctrl-names = "default"; |
| 301 |
status = "okay"; |
| 302 |
}; |
| 303 |
|
| 304 |
&i2c2 { |
| 305 |
pinctrl-0 = <&i2c2_1_pins>; |
| 306 |
pinctrl-names = "default"; |
| 307 |
status = "okay"; |
| 308 |
|
| 309 |
pca9545: i2c-mux@70 { |
| 310 |
compatible = "nxp,pca9545"; |
| 311 |
reg = <0x70>; |
| 312 |
#address-cells = <1>; |
| 313 |
#size-cells = <0>; |
| 314 |
|
| 315 |
imux0: i2c@0 { |
| 316 |
reg = <0>; |
| 317 |
#address-cells = <1>; |
| 318 |
#size-cells = <0>; |
| 319 |
|
| 320 |
pca9555: i2c-gpio-expander@20 { |
| 321 |
compatible = "nxp,pca9555"; |
| 322 |
reg = <0x20>; |
| 323 |
gpio-controller; |
| 324 |
#gpio-cells = <2>; |
| 325 |
}; |
| 326 |
|
| 327 |
rtc@51 { |
| 328 |
compatible = "nxp,pcf8563"; |
| 329 |
reg = <0x51>; |
| 330 |
}; |
| 331 |
|
| 332 |
eeprom@57 { |
| 333 |
compatible = "atmel,24c02"; |
| 334 |
reg = <0x57>; |
| 335 |
address-width = <8>; |
| 336 |
pagesize = <8>; |
| 337 |
size = <256>; |
| 338 |
}; |
| 339 |
}; |
| 340 |
|
| 341 |
imux1_sfp1: i2c@1 { |
| 342 |
reg = <1>; |
| 343 |
#address-cells = <1>; |
| 344 |
#size-cells = <0>; |
| 345 |
}; |
| 346 |
|
| 347 |
imux2_sfp2: i2c@2 { |
| 348 |
reg = <2>; |
| 349 |
#address-cells = <1>; |
| 350 |
#size-cells = <0>; |
| 351 |
}; |
| 352 |
|
| 353 |
imux3_wifi: i2c@3 { |
| 354 |
reg = <3>; |
| 355 |
#address-cells = <1>; |
| 356 |
#size-cells = <0>; |
| 357 |
}; |
| 358 |
}; |
| 359 |
}; |
| 360 |
|
| 361 |
/* mPCIe SIM2 (11300000) */ |
| 362 |
&pcie0 { |
| 363 |
status = "okay"; |
| 364 |
}; |
| 365 |
|
| 366 |
/* mPCIe (11310000 near leds) SIM3 */ |
| 367 |
&pcie1 { |
| 368 |
status = "okay"; |
| 369 |
}; |
| 370 |
|
| 371 |
/* M.2 (11280000) 1L0 key-m SSD1 CN13 / key-b SIM1 CN15 */ |
| 372 |
&pcie2 { |
| 373 |
status = "okay"; |
| 374 |
}; |
| 375 |
|
| 376 |
/* M.2 (11290000) 1L1 key-m SSD2 CN14 / key-b SIM2 CN18 */ |
| 377 |
&pcie3 { |
| 378 |
status = "okay"; |
| 379 |
}; |
| 380 |
|
| 381 |
&pio { |
| 382 |
gbe0_led0_pins: gbe0-led0-pins { |
| 383 |
mux { |
| 384 |
function = "led"; |
| 385 |
groups = "gbe0_led0"; |
| 386 |
}; |
| 387 |
}; |
| 388 |
|
| 389 |
i2c0_pins: i2c0-g0-pins { |
| 390 |
mux { |
| 391 |
function = "i2c"; |
| 392 |
groups = "i2c0_1"; |
| 393 |
}; |
| 394 |
}; |
| 395 |
|
| 396 |
i2c1_pins: i2c1-g0-pins { |
| 397 |
mux { |
| 398 |
function = "i2c"; |
| 399 |
groups = "i2c1_0"; |
| 400 |
}; |
| 401 |
}; |
| 402 |
|
| 403 |
i2c2_1_pins: i2c2-g1-pins { |
| 404 |
mux { |
| 405 |
function = "i2c"; |
| 406 |
groups = "i2c2_1"; |
| 407 |
}; |
| 408 |
}; |
| 409 |
|
| 410 |
mdio0_pins: mdio0-pins { |
| 411 |
mux { |
| 412 |
function = "eth"; |
| 413 |
groups = "mdc_mdio0"; |
| 414 |
}; |
| 415 |
|
| 416 |
conf { |
| 417 |
pins = "SMI_0_MDC", "SMI_0_MDIO"; |
| 418 |
drive-strength = <8>; |
| 419 |
}; |
| 420 |
}; |
| 421 |
|
| 422 |
mmc0_pins_emmc_51: mmc0-emmc-51-pins { |
| 423 |
mux { |
| 424 |
function = "flash"; |
| 425 |
groups = "emmc_51"; |
| 426 |
}; |
| 427 |
}; |
| 428 |
|
| 429 |
mmc0_pins_sdcard: mmc0-sdcard-pins { |
| 430 |
mux { |
| 431 |
function = "flash"; |
| 432 |
groups = "sdcard"; |
| 433 |
}; |
| 434 |
}; |
| 435 |
|
| 436 |
/* 1L0 0=key-b (CN15), 1=key-m (CN13) */ |
| 437 |
pcie-2-hog { |
| 438 |
gpio-hog; |
| 439 |
gpios = <79 GPIO_ACTIVE_HIGH>; |
| 440 |
output-high; |
| 441 |
}; |
| 442 |
|
| 443 |
/* 1L1 0=key-b (CN18), 1=key-m (CN14) */ |
| 444 |
pcie-3-hog { |
| 445 |
gpio-hog; |
| 446 |
gpios = <63 GPIO_ACTIVE_HIGH>; |
| 447 |
output-high; |
| 448 |
}; |
| 449 |
|
| 450 |
pwm0_pins: pwm0-pins { |
| 451 |
mux { |
| 452 |
groups = "pwm0"; |
| 453 |
function = "pwm"; |
| 454 |
}; |
| 455 |
}; |
| 456 |
|
| 457 |
spi0_flash_pins: spi0-flash-pins { |
| 458 |
mux { |
| 459 |
function = "spi"; |
| 460 |
groups = "spi0", "spi0_wp_hold"; |
| 461 |
}; |
| 462 |
}; |
| 463 |
}; |
| 464 |
|
| 465 |
&pwm { |
| 466 |
status = "okay"; |
| 467 |
}; |
| 468 |
|
| 469 |
&serial0 { |
| 470 |
status = "okay"; |
| 471 |
}; |
| 472 |
|
| 473 |
&spi0 { |
| 474 |
pinctrl-0 = <&spi0_flash_pins>; |
| 475 |
pinctrl-names = "default"; |
| 476 |
status = "okay"; |
| 477 |
|
| 478 |
spi_nand: nand@0 { |
| 479 |
compatible = "spi-nand"; |
| 480 |
reg = <0>; |
| 481 |
spi-max-frequency = <52000000>; |
| 482 |
spi-rx-bus-width = <4>; |
| 483 |
spi-tx-bus-width = <4>; |
| 484 |
}; |
| 485 |
}; |
| 486 |
|
| 487 |
&spi_nand { |
| 488 |
partitions { |
| 489 |
compatible = "fixed-partitions"; |
| 490 |
#address-cells = <1>; |
| 491 |
#size-cells = <1>; |
| 492 |
|
| 493 |
partition@0 { |
| 494 |
reg = <0x0 0x200000>; |
| 495 |
label = "bl2"; |
| 496 |
}; |
| 497 |
|
| 498 |
partition@200000 { |
| 499 |
compatible = "linux,ubi"; |
| 500 |
reg = <0x200000 0xfe00000>; |
| 501 |
label = "ubi"; |
| 502 |
}; |
| 503 |
}; |
| 504 |
}; |
| 505 |
|
| 506 |
/* back USB */ |
| 507 |
&ssusb0 { |
| 508 |
/* Use U2P only instead of both U3P/U2P due to U3P serdes shared with pcie2 */ |
| 509 |
phys = <&xphyu2port0 PHY_TYPE_USB2>; |
| 510 |
mediatek,u3p-dis-msk = <1>; |
| 511 |
status = "okay"; |
| 512 |
}; |
| 513 |
|
| 514 |
/* front USB */ |
| 515 |
&ssusb1 { |
| 516 |
status = "okay"; |
| 517 |
}; |
| 518 |
|
| 519 |
&switch { |
| 520 |
dsa,member = <1 0>; |
| 521 |
status = "okay"; |
| 522 |
}; |
| 523 |
|
| 524 |
&tphy { |
| 525 |
status = "okay"; |
| 526 |
}; |
| 527 |
|
| 528 |
&watchdog { |
| 529 |
status = "okay"; |
| 530 |
}; |
| 531 |
|
| 532 |
&xsphy { |
| 533 |
status = "okay"; |
| 534 |
}; |