Debian Codegraph @

scripts/dtc/include-prefixes/arm64/mediatek/mt7986a-bananapi-bpi-r3.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
2 /*
3 * Copyright (C) 2021 MediaTek Inc.
4 * Authors: Sam.Shih <[email protected]>
5 * Frank Wunderlich <[email protected]>
6 * Daniel Golle <[email protected]>
7 */
8
9 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/leds/common.h>
13 #include <dt-bindings/pinctrl/mt65xx.h>
14
15 #include "mt7986a.dtsi"
16
17 / {
18 model = "Bananapi BPI-R3";
19 chassis-type = "embedded";
20 compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
21
22 aliases {
23 serial0 = &uart0;
24 ethernet0 = &gmac0;
25 ethernet1 = &gmac1;
26 };
27
28 chosen {
29 stdout-path = "serial0:115200n8";
30 };
31
32 dcin: regulator-12vd {
33 compatible = "regulator-fixed";
34 regulator-name = "12vd";
35 regulator-min-microvolt = <12000000>;
36 regulator-max-microvolt = <12000000>;
37 regulator-boot-on;
38 regulator-always-on;
39 };
40
41 fan: pwm-fan {
42 compatible = "pwm-fan";
43 #cooling-cells = <2>;
44 /* cooling level (0, 1, 2) - pwm inverted */
45 cooling-levels = <255 40 0>;
46 pwms = <&pwm 0 10000>;
47 status = "okay";
48 };
49
50 gpio-keys {
51 compatible = "gpio-keys";
52
53 reset-key {
54 label = "reset";
55 linux,code = <KEY_RESTART>;
56 gpios = <&pio 9 GPIO_ACTIVE_LOW>;
57 };
58
59 wps-key {
60 label = "wps";
61 linux,code = <KEY_WPS_BUTTON>;
62 gpios = <&pio 10 GPIO_ACTIVE_LOW>;
63 };
64 };
65
66 /* i2c of the left SFP cage (wan) */
67 i2c_sfp1: i2c-0 {
68 compatible = "i2c-gpio";
69 sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
70 scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
71 i2c-gpio,delay-us = <2>;
72 };
73
74 /* i2c of the right SFP cage (lan) */
75 i2c_sfp2: i2c-1 {
76 compatible = "i2c-gpio";
77 sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
78 scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
79 i2c-gpio,delay-us = <2>;
80 };
81
82 leds {
83 compatible = "gpio-leds";
84
85 green_led: led-0 {
86 color = <LED_COLOR_ID_GREEN>;
87 function = LED_FUNCTION_POWER;
88 gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
89 default-state = "on";
90 };
91
92 blue_led: led-1 {
93 color = <LED_COLOR_ID_BLUE>;
94 function = LED_FUNCTION_STATUS;
95 gpios = <&pio 86 GPIO_ACTIVE_HIGH>;
96 default-state = "off";
97 };
98 };
99
100 reg_1p8v: regulator-1p8v {
101 compatible = "regulator-fixed";
102 regulator-name = "1.8vd";
103 regulator-min-microvolt = <1800000>;
104 regulator-max-microvolt = <1800000>;
105 regulator-boot-on;
106 regulator-always-on;
107 vin-supply = <&dcin>;
108 };
109
110 reg_3p3v: regulator-3p3v {
111 compatible = "regulator-fixed";
112 regulator-name = "3.3vd";
113 regulator-min-microvolt = <3300000>;
114 regulator-max-microvolt = <3300000>;
115 regulator-boot-on;
116 regulator-always-on;
117 vin-supply = <&dcin>;
118 };
119
120 /* left SFP cage (wan) */
121 sfp1: sfp-1 {
122 compatible = "sff,sfp";
123 i2c-bus = <&i2c_sfp1>;
124 los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
125 maximum-power-milliwatt = <3000>;
126 mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
127 tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
128 tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
129 };
130
131 /* right SFP cage (lan) */
132 sfp2: sfp-2 {
133 compatible = "sff,sfp";
134 i2c-bus = <&i2c_sfp2>;
135 los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
136 mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>;
137 maximum-power-milliwatt = <3000>;
138 tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
139 tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
140 };
141 };
142
143 &cpu_thermal {
144 cooling-maps {
145 map-cpu-active-high {
146 /* active: set fan to cooling level 2 */
147 cooling-device = <&fan 2 2>;
148 trip = <&cpu_trip_active_high>;
149 };
150
151 map-cpu-active-med {
152 /* active: set fan to cooling level 1 */
153 cooling-device = <&fan 1 1>;
154 trip = <&cpu_trip_active_med>;
155 };
156
157 map-cpu-active-low {
158 /* active: set fan to cooling level 0 */
159 cooling-device = <&fan 0 0>;
160 trip = <&cpu_trip_active_low>;
161 };
162 };
163 };
164
165 &crypto {
166 status = "okay";
167 };
168
169 &eth {
170 status = "okay";
171
172 gmac0: mac@0 {
173 compatible = "mediatek,eth-mac";
174 reg = <0>;
175 phy-mode = "2500base-x";
176
177 fixed-link {
178 speed = <2500>;
179 full-duplex;
180 pause;
181 };
182 };
183
184 gmac1: mac@1 {
185 compatible = "mediatek,eth-mac";
186 reg = <1>;
187 phy-mode = "2500base-x";
188 sfp = <&sfp1>;
189 managed = "in-band-status";
190 };
191
192 mdio: mdio-bus {
193 #address-cells = <1>;
194 #size-cells = <0>;
195 };
196 };
197
198 &mdio {
199 switch: switch@31 {
200 compatible = "mediatek,mt7531";
201 reg = <31>;
202 interrupt-controller;
203 interrupt-parent = <&pio>;
204 interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
205 #interrupt-cells = <1>;
206 reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
207 };
208 };
209
210 &mmc0 {
211 pinctrl-names = "default", "state_uhs";
212 pinctrl-0 = <&mmc0_pins_default>;
213 pinctrl-1 = <&mmc0_pins_uhs>;
214 vmmc-supply = <&reg_3p3v>;
215 vqmmc-supply = <&reg_1p8v>;
216 };
217
218 &i2c0 {
219 pinctrl-names = "default";
220 pinctrl-0 = <&i2c_pins>;
221 status = "okay";
222 };
223
224 &pcie {
225 pinctrl-names = "default";
226 pinctrl-0 = <&pcie_pins>;
227 status = "okay";
228 };
229
230 &pcie_phy {
231 status = "okay";
232 };
233
234 &pio {
235 i2c_pins: i2c-pins {
236 mux {
237 function = "i2c";
238 groups = "i2c";
239 };
240 };
241
242 mmc0_pins_default: mmc0-pins {
243 mux {
244 function = "emmc";
245 groups = "emmc_51";
246 };
247 conf-cmd-dat {
248 pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
249 "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
250 "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
251 input-enable;
252 drive-strength = <4>;
253 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
254 };
255 conf-clk {
256 pins = "EMMC_CK";
257 drive-strength = <6>;
258 bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
259 };
260 conf-ds {
261 pins = "EMMC_DSL";
262 bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
263 };
264 conf-rst {
265 pins = "EMMC_RSTB";
266 drive-strength = <4>;
267 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
268 };
269 };
270
271 mmc0_pins_uhs: mmc0-uhs-pins {
272 mux {
273 function = "emmc";
274 groups = "emmc_51";
275 };
276 conf-cmd-dat {
277 pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
278 "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
279 "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
280 input-enable;
281 drive-strength = <4>;
282 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
283 };
284 conf-clk {
285 pins = "EMMC_CK";
286 drive-strength = <6>;
287 bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
288 };
289 conf-ds {
290 pins = "EMMC_DSL";
291 bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
292 };
293 conf-rst {
294 pins = "EMMC_RSTB";
295 drive-strength = <4>;
296 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
297 };
298 };
299
300 pcie_pins: pcie-pins {
301 mux {
302 function = "pcie";
303 groups = "pcie_clk", "pcie_pereset";
304 };
305 };
306
307 pwm_pins: pwm-pins {
308 mux {
309 function = "pwm";
310 groups = "pwm0", "pwm1_0";
311 };
312 };
313
314 spi_flash_pins: spi-flash-pins {
315 mux {
316 function = "spi";
317 groups = "spi0", "spi0_wp_hold";
318 };
319 };
320
321 spic_pins: spic-pins {
322 mux {
323 function = "spi";
324 groups = "spi1_0";
325 };
326 };
327
328 uart1_pins: uart1-pins {
329 mux {
330 function = "uart";
331 groups = "uart1_rx_tx";
332 };
333 };
334
335 uart2_pins: uart2-pins {
336 mux {
337 function = "uart";
338 groups = "uart2_0_rx_tx";
339 };
340 };
341
342 wf_2g_5g_pins: wf-2g-5g-pins {
343 mux {
344 function = "wifi";
345 groups = "wf_2g", "wf_5g";
346 };
347 conf {
348 pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
349 "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
350 "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
351 "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
352 "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
353 "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
354 "WF1_TOP_CLK", "WF1_TOP_DATA";
355 drive-strength = <4>;
356 };
357 };
358
359 wf_dbdc_pins: wf-dbdc-pins {
360 mux {
361 function = "wifi";
362 groups = "wf_dbdc";
363 };
364 conf {
365 pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
366 "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
367 "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
368 "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
369 "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
370 "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
371 "WF1_TOP_CLK", "WF1_TOP_DATA";
372 drive-strength = <4>;
373 };
374 };
375
376 wf_led_pins: wf-led-pins {
377 mux {
378 function = "led";
379 groups = "wifi_led";
380 };
381 };
382 };
383
384 &pwm {
385 pinctrl-names = "default";
386 pinctrl-0 = <&pwm_pins>;
387 status = "okay";
388 };
389
390 &spi0 {
391 pinctrl-names = "default";
392 pinctrl-0 = <&spi_flash_pins>;
393 status = "okay";
394 };
395
396 &spi1 {
397 pinctrl-names = "default";
398 pinctrl-0 = <&spic_pins>;
399 status = "okay";
400 };
401
402 &ssusb {
403 status = "okay";
404 };
405
406 &switch {
407 ports {
408 #address-cells = <1>;
409 #size-cells = <0>;
410
411 port@0 {
412 reg = <0>;
413 label = "wan";
414 };
415
416 port@1 {
417 reg = <1>;
418 label = "lan0";
419 };
420
421 port@2 {
422 reg = <2>;
423 label = "lan1";
424 };
425
426 port@3 {
427 reg = <3>;
428 label = "lan2";
429 };
430
431 port@4 {
432 reg = <4>;
433 label = "lan3";
434 };
435
436 port5: port@5 {
437 reg = <5>;
438 label = "lan4";
439 phy-mode = "2500base-x";
440 sfp = <&sfp2>;
441 managed = "in-band-status";
442 };
443
444 port@6 {
445 reg = <6>;
446 label = "cpu";
447 ethernet = <&gmac0>;
448 phy-mode = "2500base-x";
449
450 fixed-link {
451 speed = <2500>;
452 full-duplex;
453 pause;
454 };
455 };
456 };
457 };
458
459 &trng {
460 status = "okay";
461 };
462
463 &uart0 {
464 status = "okay";
465 };
466
467 &uart1 {
468 pinctrl-names = "default";
469 pinctrl-0 = <&uart1_pins>;
470 status = "okay";
471 };
472
473 &uart2 {
474 pinctrl-names = "default";
475 pinctrl-0 = <&uart2_pins>;
476 status = "okay";
477 };
478
479 &usb_phy {
480 status = "okay";
481 };
482
483 &watchdog {
484 status = "okay";
485 };
486
487 &wifi {
488 status = "okay";
489 pinctrl-names = "default", "dbdc";
490 pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>;
491 pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>;
492
493 led {
494 led-active-low;
495 };
496 };
497